diff options
Diffstat (limited to 'drivers')
38 files changed, 246 insertions, 173 deletions
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index c12f1b71e934..41b74b13a00c 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -376,6 +376,8 @@ static int proc_ide_read_media break; case ide_floppy:media = "floppy\n"; break; + case ide_optical:media = "optical\n"; + break; default: media = "UNKNOWN\n"; break; } diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c index a7c725f8bf64..f286079d233f 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/pci/aec62xx.c @@ -425,12 +425,12 @@ static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_devi return d->init_setup(dev, d); } -static const struct pci_device_id aec62xx_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 }, - { PCI_DEVICE(PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 }, +static struct pci_device_id aec62xx_pci_tbl[] = { + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, + { PCI_VENDOR_ID_ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl); diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c index 03677bff0d72..f063d954236c 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/pci/serverworks.c @@ -649,11 +649,11 @@ static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device } static struct pci_device_id svwks_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3}, - { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3}, + { PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4}, { 0, }, }; MODULE_DEVICE_TABLE(pci, svwks_pci_tbl); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index 25ceb4a39ed2..20b392948f36 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -1082,10 +1082,10 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi } static struct pci_device_id siimage_pci_tbl[] = { - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680), 0}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, #ifdef CONFIG_BLK_DEV_IDE_SATA - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112), 1}, - { PCI_DEVICE(PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA), 2}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1}, + { PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2}, #endif { 0, }, }; diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 8a6c23ac8cc1..f03196c5db37 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -86,6 +86,8 @@ static const struct { u8 chipset_family; u8 flags; } SiSHostChipInfo[] = { + { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 }, + { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 }, { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 }, { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 }, { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 }, diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index ef52e6da01ed..ed4aa4e7912c 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -53,7 +53,7 @@ config VIDEO_V4L1_COMPAT If you are unsure as to whether this is required, answer Y. config VIDEO_V4L2 - tristate + bool default y source "drivers/media/video/Kconfig" diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 8393d472d3b8..7e0cedc557df 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -1190,6 +1190,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int } return err; } +#ifdef CONFIG_VIDEO_V4L1_COMPAT case VIDIOCGMBUF: { struct video_mbuf *mbuf = arg; @@ -1218,6 +1219,7 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int mutex_unlock(&q->lock); return 0; } +#endif default: return v4l_compat_translate_ioctl(inode,file,cmd,arg, saa7146_video_do_ioctl); diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index d7f1fd5b7b02..49a06fc54c51 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -1,6 +1,7 @@ config DVB_B2C2_FLEXCOP tristate "Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters" depends on DVB_CORE && I2C + select DVB_PLL select DVB_STV0299 select DVB_MT352 select DVB_MT312 diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig index f394002118f8..7d0ee1ab2903 100644 --- a/drivers/media/dvb/bt8xx/Kconfig +++ b/drivers/media/dvb/bt8xx/Kconfig @@ -1,6 +1,7 @@ config DVB_BT8XX tristate "BT8xx based PCI cards" depends on DVB_CORE && PCI && I2C && VIDEO_BT848 + select DVB_PLL select DVB_MT352 select DVB_SP887X select DVB_NXT6000 diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 3bc6722a6443..75824b77198a 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -2,6 +2,7 @@ config DVB_USB tristate "Support for various USB DVB devices" depends on DVB_CORE && USB && I2C select FW_LOADER + select DVB_PLL help By enabling this you will be able to choose the various supported USB1.1 and USB2.0 DVB devices. diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index 0ef361f0309b..db978555b1eb 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -6,43 +6,43 @@ comment "DVB-S (satellite) frontends" config DVB_STV0299 tristate "ST STV0299 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24110 tristate "Conexant CX24110 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_CX24123 tristate "Conexant CX24123 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_TDA8083 tristate "Philips TDA8083 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_MT312 tristate "Zarlink VP310/MT312 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_VES1X93 tristate "VLSI VES1893 or VES1993 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. config DVB_S5H1420 tristate "Samsung S5H1420 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-S tuner module. Say Y when you want to support this frontend. @@ -51,7 +51,7 @@ comment "DVB-T (terrestrial) frontends" config DVB_SP8870 tristate "Spase sp8870 based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -63,7 +63,7 @@ config DVB_SP8870 config DVB_SP887X tristate "Spase sp887x based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -75,25 +75,25 @@ config DVB_SP887X config DVB_CX22700 tristate "Conexant CX22700 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_CX22702 tristate "Conexant cx22702 demodulator (OFDM)" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_L64781 tristate "LSI L64781" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_TDA1004X tristate "Philips TDA10045H/TDA10046H based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help A DVB-T tuner module. Say Y when you want to support this frontend. @@ -106,32 +106,32 @@ config DVB_TDA1004X config DVB_NXT6000 tristate "NxtWave Communications NXT6000 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_MT352 tristate "Zarlink MT352 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_ZL10353 tristate "Zarlink ZL10353 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Say Y when you want to support this frontend. config DVB_DIB3000MB tristate "DiBcom 3000M-B" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. config DVB_DIB3000MC tristate "DiBcom 3000P/M-C" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-T tuner module. Designed for mobile usage. Say Y when you want to support this frontend. @@ -141,19 +141,19 @@ comment "DVB-C (cable) frontends" config DVB_VES1820 tristate "VLSI VES1820 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_TDA10021 tristate "Philips TDA10021 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-C tuner module. Say Y when you want to support this frontend. config DVB_STV0297 tristate "ST STV0297 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help A DVB-C tuner module. Say Y when you want to support this frontend. @@ -162,7 +162,7 @@ comment "ATSC (North American/Korean Terrestrial/Cable DTV) frontends" config DVB_NXT200X tristate "NxtWave Communications NXT2002/NXT2004 based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want @@ -176,7 +176,7 @@ config DVB_NXT200X config DVB_OR51211 tristate "Oren OR51211 based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help An ATSC 8VSB tuner module. Say Y when you want to support this frontend. @@ -188,7 +188,7 @@ config DVB_OR51211 config DVB_OR51132 tristate "Oren OR51132 based" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want @@ -203,7 +203,7 @@ config DVB_OR51132 config DVB_BCM3510 tristate "Broadcom BCM3510" - depends on DVB_CORE + depends on DVB_CORE && I2C select FW_LOADER help An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to @@ -211,7 +211,7 @@ config DVB_BCM3510 config DVB_LGDT330X tristate "LG Electronics LGDT3302/LGDT3303 based" - depends on DVB_CORE + depends on DVB_CORE && I2C help An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. @@ -220,15 +220,19 @@ config DVB_LGDT330X comment "Miscellaneous devices" depends on DVB_CORE +config DVB_PLL + tristate + depends on DVB_CORE && I2C + config DVB_LNBP21 tristate "LNBP21 SEC controller" - depends on DVB_CORE + depends on DVB_CORE && I2C help An SEC control chip. config DVB_ISL6421 tristate "ISL6421 SEC controller" - depends on DVB_CORE + depends on DVB_CORE && I2C help An SEC control chip. diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 5222245c7f59..0e4880b6db14 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -4,7 +4,7 @@ EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -obj-$(CONFIG_DVB_CORE) += dvb-pll.o +obj-$(CONFIG_DVB_PLL) += dvb-pll.o obj-$(CONFIG_DVB_STV0299) += stv0299.o obj-$(CONFIG_DVB_SP8870) += sp8870.o obj-$(CONFIG_DVB_CX22700) += cx22700.o diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig index 7d8e6e87bdbb..9b84b1bdc313 100644 --- a/drivers/media/dvb/pluto2/Kconfig +++ b/drivers/media/dvb/pluto2/Kconfig @@ -2,6 +2,7 @@ config DVB_PLUTO2 tristate "Pluto2 cards" depends on DVB_CORE && PCI && I2C select I2C_ALGOBIT + select DVB_PLL select DVB_TDA1004X help Support for PCI cards based on the Pluto2 FPGA like the Satelco diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 987881fa988c..5fb097595cfb 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -3,6 +3,7 @@ config DVB_AV7110 depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 select FW_LOADER select VIDEO_SAA7146_VV + select DVB_PLL select DVB_VES1820 select DVB_VES1X93 select DVB_STV0299 @@ -61,6 +62,7 @@ config DVB_BUDGET tristate "Budget cards" depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 select VIDEO_SAA7146 + select DVB_PLL select DVB_STV0299 select DVB_VES1X93 select DVB_VES1820 @@ -83,6 +85,7 @@ config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 select VIDEO_SAA7146 + select DVB_PLL select DVB_STV0297 select DVB_STV0299 select DVB_TDA1004X @@ -104,6 +107,7 @@ config DVB_BUDGET_AV tristate "Budget cards with analog video inputs" depends on DVB_CORE && PCI && I2C && VIDEO_V4L1 select VIDEO_SAA7146_VV + select DVB_PLL select DVB_STV0299 select DVB_TDA1004X select DVB_TDA10021 @@ -122,6 +126,7 @@ config DVB_BUDGET_PATCH tristate "AV7110 cards with Budget Patch" depends on DVB_CORE && DVB_BUDGET && VIDEO_V4L1 select DVB_AV7110 + select DVB_PLL select DVB_STV0299 select DVB_VES1X93 select DVB_TDA8083 diff --git a/drivers/media/dvb/ttusb-budget/Kconfig b/drivers/media/dvb/ttusb-budget/Kconfig index 92c7cdcf8981..46a6a60d2ab9 100644 --- a/drivers/media/dvb/ttusb-budget/Kconfig +++ b/drivers/media/dvb/ttusb-budget/Kconfig @@ -1,6 +1,7 @@ config DVB_TTUSB_BUDGET tristate "Technotrend/Hauppauge Nova-USB devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && I2C + select DVB_PLL select DVB_CX22700 select DVB_TDA1004X select DVB_VES1820 diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 732bf1e7c326..94d078b77bab 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -260,7 +260,7 @@ source "drivers/media/video/saa7134/Kconfig" config VIDEO_MXB tristate "Siemens-Nixdorf 'Multimedia eXtension Board'" - depends on PCI && VIDEO_V4L1 + depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_TUNER ---help--- @@ -272,7 +272,7 @@ config VIDEO_MXB config VIDEO_DPC tristate "Philips-Semiconductors 'dpc7146 demonstration board'" - depends on PCI && VIDEO_V4L1 + depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_V4L2 ---help--- @@ -287,7 +287,7 @@ config VIDEO_DPC config VIDEO_HEXIUM_ORION tristate "Hexium HV-PCI6 and Orion frame grabber" - depends on PCI && VIDEO_V4L1 + depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_V4L2 ---help--- @@ -299,7 +299,7 @@ config VIDEO_HEXIUM_ORION config VIDEO_HEXIUM_GEMINI tristate "Hexium Gemini frame grabber" - depends on PCI && VIDEO_V4L1 + depends on PCI && VIDEO_V4L1 && I2C select VIDEO_SAA7146_VV select VIDEO_V4L2 ---help--- diff --git a/drivers/media/video/bt8xx/bttv-input.c b/drivers/media/video/bt8xx/bttv-input.c index b41f81d2372c..933d6db09acb 100644 --- a/drivers/media/video/bt8xx/bttv-input.c +++ b/drivers/media/video/bt8xx/bttv-input.c @@ -303,6 +303,7 @@ int bttv_input_init(struct bttv *btv) ir->mask_keyup = 0x010000; ir->polling = 50; // ms break; + case BTTV_BOARD_PV_M4900: case BTTV_BOARD_PV_BT878P_9B: case BTTV_BOARD_PV_BT878P_PLUS: ir_codes = ir_codes_pixelview; diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig index 80e23ee9801c..7a94e6a11927 100644 --- a/drivers/media/video/cx88/Kconfig +++ b/drivers/media/video/cx88/Kconfig @@ -51,6 +51,7 @@ config VIDEO_CX88_DVB tristate "DVB/ATSC Support for cx2388x based TV cards" depends on VIDEO_CX88 && DVB_CORE select VIDEO_BUF_DVB + select DVB_PLL ---help--- This adds support for DVB/ATSC cards based on the Conexant 2388x chip. diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig index e1c1805df1fb..f5543166d193 100644 --- a/drivers/media/video/saa7134/Kconfig +++ b/drivers/media/video/saa7134/Kconfig @@ -40,6 +40,7 @@ config VIDEO_SAA7134_DVB depends on VIDEO_SAA7134 && DVB_CORE select VIDEO_BUF_DVB select FW_LOADER + select DVB_PLL ---help--- This adds support for DVB cards based on the Philips saa7134 chip. diff --git a/drivers/media/video/tuner-types.c b/drivers/media/video/tuner-types.c index d7eadc2c298d..8b542599ed47 100644 --- a/drivers/media/video/tuner-types.c +++ b/drivers/media/video/tuner-types.c @@ -926,11 +926,17 @@ static struct tuner_params tuner_lg_tdvs_h06xf_params[] = { /* ------------ TUNER_YMEC_TVF66T5_B_DFF - Philips PAL ------------ */ +static struct tuner_range tuner_ymec_tvf66t5_b_dff_pal_ranges[] = { + { 16 * 160.25 /*MHz*/, 0x8e, 0x01, }, + { 16 * 464.25 /*MHz*/, 0x8e, 0x02, }, + { 16 * 999.99 , 0x8e, 0x08, }, +}; + static struct tuner_params tuner_ymec_tvf66t5_b_dff_params[] = { { .type = TUNER_PARAM_TYPE_PAL, - .ranges = tuner_tena_9533_di_pal_ranges, - .count = ARRAY_SIZE(tuner_tena_9533_di_pal_ranges), + .ranges = tuner_ymec_tvf66t5_b_dff_pal_ranges, + .count = ARRAY_SIZE(tuner_ymec_tvf66t5_b_dff_pal_ranges), }, }; diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index ffcda95ed9d4..8fb4a3414e0a 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -267,7 +267,7 @@ struct zoran_v4l_settings { }; /* whoops, this one is undeclared if !v4l2 */ -#ifndef HAVE_V4L2 +#ifndef CONFIG_VIDEO_V4L2 struct v4l2_jpegcompression { int quality; int APPn; diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index d9a5876eb386..5f90db27892b 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -86,7 +86,7 @@ #include "zoran_device.h" #include "zoran_card.h" -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 /* we declare some card type definitions here, they mean * the same as the v4l1 ZORAN_VID_TYPE above, except it's v4l2 */ #define ZORAN_V4L2_VID_FLAGS ( \ @@ -103,7 +103,7 @@ const struct zoran_format zoran_formats[] = { { .name = "15-bit RGB", .palette = VIDEO_PALETTE_RGB555, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 #ifdef __LITTLE_ENDIAN .fourcc = V4L2_PIX_FMT_RGB555, #else @@ -117,7 +117,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "16-bit RGB", .palette = VIDEO_PALETTE_RGB565, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 #ifdef __LITTLE_ENDIAN .fourcc = V4L2_PIX_FMT_RGB565, #else @@ -131,7 +131,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "24-bit RGB", .palette = VIDEO_PALETTE_RGB24, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 #ifdef __LITTLE_ENDIAN .fourcc = V4L2_PIX_FMT_BGR24, #else @@ -145,7 +145,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "32-bit RGB", .palette = VIDEO_PALETTE_RGB32, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 #ifdef __LITTLE_ENDIAN .fourcc = V4L2_PIX_FMT_BGR32, #else @@ -159,7 +159,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "4:2:2, packed, YUYV", .palette = VIDEO_PALETTE_YUV422, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 .fourcc = V4L2_PIX_FMT_YUYV, .colorspace = V4L2_COLORSPACE_SMPTE170M, #endif @@ -169,7 +169,7 @@ const struct zoran_format zoran_formats[] = { }, { .name = "Hardware-encoded Motion-JPEG", .palette = -1, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 .fourcc = V4L2_PIX_FMT_MJPEG, .colorspace = V4L2_COLORSPACE_SMPTE170M, #endif @@ -210,7 +210,7 @@ static int lock_norm = 0; /* 1=Don't change TV standard (norm) */ module_param(lock_norm, int, 0); MODULE_PARM_DESC(lock_norm, "Users can't change norm"); -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 /* small helper function for calculating buffersizes for v4l2 * we calculate the nearest higher power-of-two, which * will be the recommended buffersize */ @@ -1761,7 +1761,7 @@ setup_overlay (struct file *file, return wait_grab_pending(zr); } -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 /* get the status of a buffer in the clients buffer queue */ static int zoran_v4l2_buffer_status (struct file *file, @@ -2676,7 +2676,7 @@ zoran_do_ioctl (struct inode *inode, } break; -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 /* The new video4linux2 capture interface - much nicer than video4linux1, since * it allows for integrating the JPEG capturing calls inside standard v4l2 @@ -4689,7 +4689,7 @@ static struct file_operations zoran_fops = { struct video_device zoran_template __devinitdata = { .name = ZORAN_NAME, .type = ZORAN_VID_TYPE, -#ifdef HAVE_V4L2 +#ifdef CONFIG_VIDEO_V4L2 .type2 = ZORAN_V4L2_VID_FLAGS, #endif .hardware = ZORAN_HARDWARE, diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c index 7ca9e95bdf89..fb6565b98f32 100644 --- a/drivers/mmc/imxmmc.c +++ b/drivers/mmc/imxmmc.c @@ -91,6 +91,8 @@ struct imxmci_host { int dma_allocated; unsigned char actual_bus_width; + + int prev_cmd_code; }; #define IMXMCI_PEND_IRQ_b 0 @@ -248,16 +250,14 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) * partial FIFO fills and reads. The length has to be rounded up to burst size multiple. * This is required for SCR read at least. */ - if (datasz < 64) { + if (datasz < 512) { host->dma_size = datasz; if (data->flags & MMC_DATA_READ) { host->dma_dir = DMA_FROM_DEVICE; /* Hack to enable read SCR */ - if(datasz < 16) { - MMC_NOB = 1; - MMC_BLK_LEN = 16; - } + MMC_NOB = 1; + MMC_BLK_LEN = 512; } else { host->dma_dir = DMA_TO_DEVICE; } @@ -409,6 +409,9 @@ static void imxmci_finish_request(struct imxmci_host *host, struct mmc_request * spin_unlock_irqrestore(&host->lock, flags); + if(req && req->cmd) + host->prev_cmd_code = req->cmd->opcode; + host->req = NULL; host->cmd = NULL; host->data = NULL; @@ -553,7 +556,6 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) { int i; int burst_len; - int flush_len; int trans_done = 0; unsigned int stat = *pstat; @@ -566,44 +568,43 @@ static int imxmci_cpu_driven_data(struct imxmci_host *host, unsigned int *pstat) dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data running STATUS = 0x%x\n", stat); + udelay(20); /* required for clocks < 8MHz*/ + if(host->dma_dir == DMA_FROM_DEVICE) { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE, - 20, "imxmci_cpu_driven_data read"); + 50, "imxmci_cpu_driven_data read"); while((stat & (STATUS_APPL_BUFF_FF | STATUS_DATA_TRANS_DONE)) && - (host->data_cnt < host->dma_size)) { - if(burst_len >= host->dma_size - host->data_cnt) { - flush_len = burst_len; - burst_len = host->dma_size - host->data_cnt; - flush_len -= burst_len; - host->data_cnt = host->dma_size; - trans_done = 1; - } else { - flush_len = 0; - host->data_cnt += burst_len; - } + (host->data_cnt < 512)) { + + udelay(20); /* required for clocks < 8MHz*/ for(i = burst_len; i>=2 ; i-=2) { - *(host->data_ptr++) = MMC_BUFFER_ACCESS; - udelay(20); /* required for clocks < 8MHz*/ + u16 data; + data = MMC_BUFFER_ACCESS; + udelay(10); /* required for clocks < 8MHz*/ + if(host->data_cnt+2 <= host->dma_size) { + *(host->data_ptr++) = data; + } else { + if(host->data_cnt < host->dma_size) + *(u8*)(host->data_ptr) = data; + } + host->data_cnt += 2; } - if(i == 1) - *(u8*)(host->data_ptr) = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - /* Flush extra bytes from FIFO */ - while(flush_len && !(stat & STATUS_DATA_TRANS_DONE)){ - i = MMC_BUFFER_ACCESS; - stat = MMC_STATUS; - stat &= ~STATUS_CRC_READ_ERR; /* Stupid but required there */ - } - - dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read burst %d STATUS = 0x%x\n", - burst_len, stat); + dev_dbg(mmc_dev(host->mmc), "imxmci_cpu_driven_data read %d burst %d STATUS = 0x%x\n", + host->data_cnt, burst_len, stat); } + + if((stat & STATUS_DATA_TRANS_DONE) && (host->data_cnt >= 512)) + trans_done = 1; + + if(host->dma_size & 0x1ff) + stat &= ~STATUS_CRC_READ_ERR; + } else { imxmci_busy_wait_for_status(host, &stat, STATUS_APPL_BUFF_FE, @@ -692,8 +693,8 @@ static void imxmci_tasklet_fnc(unsigned long data) what, stat, MMC_INT_MASK); dev_err(mmc_dev(host->mmc), "CMD_DAT_CONT = 0x%04x, MMC_BLK_LEN = 0x%04x, MMC_NOB = 0x%04x, DMA_CCR = 0x%08x\n", MMC_CMD_DAT_CONT, MMC_BLK_LEN, MMC_NOB, CCR(host->dma)); - dev_err(mmc_dev(host->mmc), "CMD%d, bus %d-bit, dma_size = 0x%x\n", - host->cmd?host->cmd->opcode:0, 1<<host->actual_bus_width, host->dma_size); + dev_err(mmc_dev(host->mmc), "CMD%d, prevCMD%d, bus %d-bit, dma_size = 0x%x\n", + host->cmd?host->cmd->opcode:0, host->prev_cmd_code, 1<<host->actual_bus_width, host->dma_size); } if(!host->present || timeout) diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 33525bdf2ab6..74eaaee66de0 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -247,6 +247,55 @@ int mmc_wait_for_app_cmd(struct mmc_host *host, unsigned int rca, EXPORT_SYMBOL(mmc_wait_for_app_cmd); +/** + * mmc_set_data_timeout - set the timeout for a data command + * @data: data phase for command + * @card: the MMC card associated with the data transfer + * @write: flag to differentiate reads from writes + */ +void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card, + int write) +{ + unsigned int mult; + + /* + * SD cards use a 100 multiplier rather than 10 + */ + mult = mmc_card_sd(card) ? 100 : 10; + + /* + * Scale up the multiplier (and therefore the timeout) by + * the r2w factor for writes. + */ + if (write) + mult <<= card->csd.r2w_factor; + + data->timeout_ns = card->csd.tacc_ns * mult; + data->timeout_clks = card->csd.tacc_clks * mult; + + /* + * SD cards also have an upper limit on the timeout. + */ + if (mmc_card_sd(card)) { + unsigned int timeout_us, limit_us; + + timeout_us = data->timeout_ns / 1000; + timeout_us += data->timeout_clks * 1000 / + (card->host->ios.clock / 1000); + + if (write) + limit_us = 250000; + else + limit_us = 100000; + + if (timeout_us > limit_us) { + data->timeout_ns = limit_us * 1000; + data->timeout_clks = 0; + } + } +} +EXPORT_SYMBOL(mmc_set_data_timeout); + static int mmc_select_card(struct mmc_host *host, struct mmc_card *card); /** @@ -908,11 +957,9 @@ static void mmc_read_scrs(struct mmc_host *host) { int err; struct mmc_card *card; - struct mmc_request mrq; struct mmc_command cmd; struct mmc_data data; - struct scatterlist sg; list_for_each_entry(card, &host->cards, node) { @@ -947,8 +994,8 @@ static void mmc_read_scrs(struct mmc_host *host) memset(&data, 0, sizeof(struct mmc_data)); - data.timeout_ns = card->csd.tacc_ns * 10; - data.timeout_clks = card->csd.tacc_clks * 10; + mmc_set_data_timeout(&data, card, 0); + data.blksz_bits = 3; data.blksz = 1 << 3; data.blocks = 1; diff --git a/drivers/mmc/mmc_block.c b/drivers/mmc/mmc_block.c index 115cc21094b9..a0e0dad1b419 100644 --- a/drivers/mmc/mmc_block.c +++ b/drivers/mmc/mmc_block.c @@ -30,6 +30,7 @@ #include <linux/mutex.h> #include <linux/mmc/card.h> +#include <linux/mmc/host.h> #include <linux/mmc/protocol.h> #include <asm/system.h> @@ -171,8 +172,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.cmd.arg = req->sector << 9; brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; - brq.data.timeout_ns = card->csd.tacc_ns * 10; - brq.data.timeout_clks = card->csd.tacc_clks * 10; brq.data.blksz_bits = md->block_bits; brq.data.blksz = 1 << md->block_bits; brq.data.blocks = req->nr_sectors >> (md->block_bits - 9); @@ -180,6 +179,8 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.stop.arg = 0; brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC; + mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ); + if (rq_data_dir(req) == READ) { brq.cmd.opcode = brq.data.blocks > 1 ? MMC_READ_MULTIPLE_BLOCK : MMC_READ_SINGLE_BLOCK; brq.data.flags |= MMC_DATA_READ; @@ -187,12 +188,6 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.cmd.opcode = MMC_WRITE_BLOCK; brq.data.flags |= MMC_DATA_WRITE; brq.data.blocks = 1; - - /* - * Scale up the timeout by the r2w factor - */ - brq.data.timeout_ns <<= card->csd.r2w_factor; - brq.data.timeout_clks <<= card->csd.r2w_factor; } if (brq.data.blocks > 1) { @@ -324,52 +319,11 @@ static struct mmc_blk_data *mmc_blk_alloc(struct mmc_card *card) md->read_only = mmc_blk_readonly(card); /* - * Figure out a workable block size. MMC cards have: - * - two block sizes, one for read and one for write. - * - may support partial reads and/or writes - * (allows block sizes smaller than specified) - */ - md->block_bits = card->csd.read_blkbits; - if (card->csd.write_blkbits != card->csd.read_blkbits) { - if (card->csd.write_blkbits < card->csd.read_blkbits && - card->csd.read_partial) { - /* - * write block size is smaller than read block - * size, but we support partial reads, so choose - * the smaller write block size. - */ - md->block_bits = card->csd.write_blkbits; - } else if (card->csd.write_blkbits > card->csd.read_blkbits && - card->csd.write_partial) { - /* - * read block size is smaller than write block - * size, but we support partial writes. Use read - * block size. - */ - } else { - /* - * We don't support this configuration for writes. - */ - printk(KERN_ERR "%s: unable to select block size for " - "writing (rb%u wb%u rp%u wp%u)\n", - mmc_card_id(card), - 1 << card->csd.read_blkbits, - 1 << card->csd.write_blkbits, - card->csd.read_partial, - card->csd.write_partial); - md->read_only = 1; - } - } - - /* - * Refuse to allow block sizes smaller than 512 bytes. + * Both SD and MMC specifications state (although a bit + * unclearly in the MMC case) that a block size of 512 + * bytes must always be supported by the card. */ - if (md->block_bits < 9) { - printk(KERN_ERR "%s: unable to support block size %u\n", - mmc_card_id(card), 1 << md->block_bits); - ret = -EINVAL; - goto err_kfree; - } + md->block_bits = 9; md->disk = alloc_disk(1 << MMC_SHIFT); if (md->disk == NULL) { diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 30b3671d833d..a2bd8119270e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2393,7 +2393,7 @@ config MYRI10GE you will need a newer firmware image. You may get this image or more information, at: - <http://www.myri.com/Myri-10G/> + <http://www.myri.com/scs/download-Myri10GE.html> To compile this driver as a module, choose M here and read <file:Documentation/networking/net-modules.txt>. The module diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index 3d76fa144c4f..a860ebbbf815 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -377,8 +377,8 @@ dm9000_release_board(struct platform_device *pdev, struct board_info *db) kfree(db->data_req); } - if (db->addr_res != NULL) { - release_resource(db->addr_res); + if (db->addr_req != NULL) { + release_resource(db->addr_req); kfree(db->addr_req); } } diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 2d20caf377f5..a9bb3cb7e89b 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -123,7 +123,8 @@ enum { ich6_sata = 4, ich6_sata_ahci = 5, ich6m_sata_ahci = 6, - ich8_sata_ahci = 7, + ich7m_sata_ahci = 7, + ich8_sata_ahci = 8, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -188,7 +189,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* 82801GB/GR/GH (ICH7, identical to ICH6) */ { 0x8086, 0x27c0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* 2801GBM/GHM (ICH7M, identical to ICH6M) */ - { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6m_sata_ahci }, + { 0x8086, 0x27c4, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich7m_sata_ahci }, /* Enterprise Southbridge 2 (where's the datasheet?) */ { 0x8086, 0x2680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich6_sata_ahci }, /* SATA Controller 1 IDE (ICH8, no datasheet yet) */ @@ -336,6 +337,24 @@ static const struct piix_map_db ich6m_map_db = { }, }; +static const struct piix_map_db ich7m_map_db = { + .mask = 0x3, + .port_enable = 0x5, + .present_shift = 4, + + /* Map 01b isn't specified in the doc but some notebooks use + * it anyway. ATM, the only case spotted carries subsystem ID + * 1025:0107. This is the only difference from ich6m. + */ + .map = { + /* PM PS SM SS MAP */ + { P0, P2, RV, RV }, /* 00b */ + { IDE, IDE, P1, P3 }, /* 01b */ + { P0, P2, IDE, IDE }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static const struct piix_map_db ich8_map_db = { .mask = 0x3, .port_enable = 0x3, @@ -355,6 +374,7 @@ static const struct piix_map_db *piix_map_db_table[] = { [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, + [ich7m_sata_ahci] = &ich7m_map_db, [ich8_sata_ahci] = &ich8_map_db, }; @@ -444,6 +464,18 @@ static struct ata_port_info piix_port_info[] = { .port_ops = &piix_sata_ops, }, + /* ich7m_sata_ahci */ + { + .sht = &piix_sht, + .host_flags = ATA_FLAG_SATA | + PIIX_FLAG_CHECKINTR | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x7f, /* udma0-6 */ + .port_ops = &piix_sata_ops, + }, + /* ich8_sata_ahci */ { .sht = &piix_sht, diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 1053c7c76b7d..fa38a413d16b 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -1961,8 +1961,7 @@ comreset_retry: timeout = jiffies + msecs_to_jiffies(200); do { sata_scr_read(ap, SCR_STATUS, &sstatus); - sstatus &= 0x3; - if ((sstatus == 3) || (sstatus == 0)) + if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0)) break; __msleep(1, can_sleep); diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 01d40369a8a5..a3727af8b9c1 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -77,6 +77,7 @@ static void svia_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val); static void vt6420_error_handler(struct ata_port *ap); static const struct pci_device_id svia_pci_tbl[] = { + { 0x1106, 0x0591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3149, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6420 }, { 0x1106, 0x3249, PCI_ANY_ID, PCI_ANY_ID, 0, 0, vt6421 }, diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c index 301573373c30..cbede06cac27 100644 --- a/drivers/serial/sh-sci.c +++ b/drivers/serial/sh-sci.c @@ -1579,7 +1579,7 @@ static int __init serial_console_setup(struct console *co, char *options) h8300_sci_enable(port, sci_enable); #endif #elif defined(CONFIG_SUPERH64) - port->uartclk = current_cpu_info.module_clock * 16; + port->uartclk = current_cpu_data.module_clock * 16; #else { struct clk *clk = clk_get("module_clk"); @@ -1720,7 +1720,7 @@ static int __init sci_init(void) #if defined(__H8300H__) || defined(__H8300S__) sciport->port.uartclk = CONFIG_CPU_CLOCK; #elif defined(CONFIG_SUPERH64) - sciport->port.uartclk = current_cpu_info.module_clock * 16; + sciport->port.uartclk = current_cpu_data.module_clock * 16; #else struct clk *clk = clk_get("module_clk"); sciport->port.uartclk = clk_get_rate(clk) * 16; diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c index acb24c6219d9..a2c56b2de589 100644 --- a/drivers/usb/input/hid-core.c +++ b/drivers/usb/input/hid-core.c @@ -1444,7 +1444,7 @@ void hid_init_reports(struct hid_device *hid) #define USB_DEVICE_ID_GTCO_402 0x0402 #define USB_DEVICE_ID_GTCO_403 0x0403 #define USB_DEVICE_ID_GTCO_404 0x0404 -#define USB_DEVICE_ID_GTCO_404 0x0405 +#define USB_DEVICE_ID_GTCO_405 0x0405 #define USB_DEVICE_ID_GTCO_500 0x0500 #define USB_DEVICE_ID_GTCO_501 0x0501 #define USB_DEVICE_ID_GTCO_502 0x0502 @@ -1657,7 +1657,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_402, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_403, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE }, - { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_404, HID_QUIRK_IGNORE }, + { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_405, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_500, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_501, HID_QUIRK_IGNORE }, { USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_502, HID_QUIRK_IGNORE }, diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c index 3b175aa482cd..a338bf4c2d78 100644 --- a/drivers/usb/input/usbtouchscreen.c +++ b/drivers/usb/input/usbtouchscreen.c @@ -286,7 +286,7 @@ static int mtouch_init(struct usbtouch_usb *usbtouch) static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press) { *x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F); - *x = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); + *y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F); *press = ((pkt[2] & 0x1F) << 7) | (pkt[5] & 0x7F); *touch = ~pkt[7] & 0x20; diff --git a/drivers/usb/input/yealink.c b/drivers/usb/input/yealink.c index 575a4e672e96..7b45fd3de911 100644 --- a/drivers/usb/input/yealink.c +++ b/drivers/usb/input/yealink.c @@ -810,12 +810,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err) if (yld == NULL) return err; - if (yld->urb_irq) { - usb_kill_urb(yld->urb_irq); - usb_free_urb(yld->urb_irq); - } - if (yld->urb_ctl) - usb_free_urb(yld->urb_ctl); + usb_kill_urb(yld->urb_irq); /* parameter validation in core/urb */ + usb_kill_urb(yld->urb_ctl); /* parameter validation in core/urb */ + if (yld->idev) { if (err) input_free_device(yld->idev); @@ -831,6 +828,9 @@ static int usb_cleanup(struct yealink_dev *yld, int err) if (yld->irq_data) usb_buffer_free(yld->udev, USB_PKT_LEN, yld->irq_data, yld->irq_dma); + + usb_free_urb(yld->urb_irq); /* parameter validation in core/urb */ + usb_free_urb(yld->urb_ctl); /* parameter validation in core/urb */ kfree(yld); return err; } diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 738bd7c7451f..e16582f3733c 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3435,6 +3435,8 @@ static void sisusb_disconnect(struct usb_interface *intf) static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0900) }, + { USB_DEVICE(0x0711, 0x0901) }, + { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 15945e806f03..c6115aa1b445 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -506,6 +506,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_YEI_SERVOCENTER31_PID) }, { USB_DEVICE(FTDI_VID, FTDI_THORLABS_PID) }, { USB_DEVICE(TESTO_VID, TESTO_USB_INTERFACE_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_GAMMA_SCOUT_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 8888cd80a491..77299996f7ee 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -467,6 +467,11 @@ #define TESTO_VID 0x128D #define TESTO_USB_INTERFACE_PID 0x0001 +/* + * Gamma Scout (http://gamma-scout.com/). Submitted by rsc@runtux.com. + */ +#define FTDI_GAMMA_SCOUT_PID 0xD678 /* Gamma Scout online */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 12c1694d322e..e06a41bd0f3b 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -464,8 +464,10 @@ static int serial_read_proc (char *page, char **start, off_t off, int count, int length += sprintf (page+length, " path:%s", tmp); length += sprintf (page+length, "\n"); - if ((length + begin) > (off + count)) + if ((length + begin) > (off + count)) { + usb_serial_put(serial); goto done; + } if ((length + begin) < off) { begin += length; length = 0; |