diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/tty/pty.c | 21 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 21 | ||||
| -rw-r--r-- | drivers/tty/serial/omap-serial.c | 10 | ||||
| -rw-r--r-- | drivers/tty/tty_io.c | 3 | ||||
| -rw-r--r-- | drivers/tty/tty_mutex.c | 7 |
5 files changed, 55 insertions, 7 deletions
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index b3110040164a..2348fa613707 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -681,7 +681,14 @@ static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) /* this is called once with whichever end is closed last */ static void pty_unix98_shutdown(struct tty_struct *tty) { - devpts_kill_index(tty->driver_data, tty->index); + struct inode *ptmx_inode; + + if (tty->driver->subtype == PTY_TYPE_MASTER) + ptmx_inode = tty->driver_data; + else + ptmx_inode = tty->link->driver_data; + devpts_kill_index(ptmx_inode, tty->index); + devpts_del_ref(ptmx_inode); } static const struct tty_operations ptm_unix98_ops = { @@ -773,6 +780,18 @@ static int ptmx_open(struct inode *inode, struct file *filp) set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ tty->driver_data = inode; + /* + * In the case where all references to ptmx inode are dropped and we + * still have /dev/tty opened pointing to the master/slave pair (ptmx + * is closed/released before /dev/tty), we must make sure that the inode + * is still valid when we call the final pty_unix98_shutdown, thus we + * hold an additional reference to the ptmx inode. For the same /dev/tty + * last close case, we also need to make sure the super_block isn't + * destroyed (devpts instance unmounted), before /dev/tty is closed and + * on its release devpts_kill_index is called. + */ + devpts_add_ref(inode); + tty_add_file(tty, filp); slave_inode = devpts_pty_new(inode, diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index e71ec78fc11e..7cd6f9a90542 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1941,6 +1941,7 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCIE_VENDOR_ID_WCH 0x1c00 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 +#define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 #define PCI_VENDOR_ID_PERICOM 0x12D8 #define PCI_DEVICE_ID_PERICOM_PI7C9X7951 0x7951 @@ -2637,6 +2638,14 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch353_setup, }, + /* WCH CH382 2S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH382_2S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_wch_ch38x_setup, + }, /* WCH CH382 2S1P card (16850 clone) */ { .vendor = PCIE_VENDOR_ID_WCH, @@ -2955,6 +2964,7 @@ enum pci_board_num_t { pbn_fintek_4, pbn_fintek_8, pbn_fintek_12, + pbn_wch382_2, pbn_wch384_4, pbn_pericom_PI7C9X7951, pbn_pericom_PI7C9X7952, @@ -3775,6 +3785,13 @@ static struct pciserial_board pci_boards[] = { .base_baud = 115200, .first_offset = 0x40, }, + [pbn_wch382_2] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0xC0, + }, [pbn_wch384_4] = { .flags = FL_BASE0, .num_ports = 4, @@ -5574,6 +5591,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH382_2S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch382_2 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_4S, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 }, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index b645f9228ed7..fa49eb1e2fa2 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1165,7 +1165,7 @@ serial_omap_type(struct uart_port *port) #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -static void wait_for_xmitr(struct uart_omap_port *up) +static void __maybe_unused wait_for_xmitr(struct uart_omap_port *up) { unsigned int status, tmout = 10000; @@ -1343,7 +1343,7 @@ static inline void serial_omap_add_console_port(struct uart_omap_port *up) /* Enable or disable the rs485 support */ static int -serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) +serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { struct uart_omap_port *up = to_uart_omap_port(port); unsigned int mode; @@ -1356,8 +1356,12 @@ serial_omap_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) up->ier = 0; serial_out(up, UART_IER, 0); + /* Clamp the delays to [0, 100ms] */ + rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); + rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); + /* store new config */ - port->rs485 = *rs485conf; + port->rs485 = *rs485; /* * Just as a precaution, only allow rs485 diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 5cec01c75691..a7eacef1bd22 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2066,13 +2066,12 @@ retry_open: if (tty) { mutex_unlock(&tty_mutex); retval = tty_lock_interruptible(tty); + tty_kref_put(tty); /* drop kref from tty_driver_lookup_tty() */ if (retval) { if (retval == -EINTR) retval = -ERESTARTSYS; goto err_unref; } - /* safe to drop the kref from tty_driver_lookup_tty() */ - tty_kref_put(tty); retval = tty_reopen(tty); if (retval < 0) { tty_unlock(tty); diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index d2f3c4cd697f..dfa9ec03fa8e 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -21,10 +21,15 @@ EXPORT_SYMBOL(tty_lock); int tty_lock_interruptible(struct tty_struct *tty) { + int ret; + if (WARN(tty->magic != TTY_MAGIC, "L Bad %p\n", tty)) return -EIO; tty_kref_get(tty); - return mutex_lock_interruptible(&tty->legacy_mutex); + ret = mutex_lock_interruptible(&tty->legacy_mutex); + if (ret) + tty_kref_put(tty); + return ret; } void __lockfunc tty_unlock(struct tty_struct *tty) |