diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/hid/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/hid/Makefile | 1 | ||||
| -rw-r--r-- | drivers/hid/hid-core.c | 2 | ||||
| -rw-r--r-- | drivers/hid/hid-rmi.c | 889 |
4 files changed, 900 insertions, 0 deletions
diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 7af9d0b5dea1..762f15d6ed88 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -657,6 +657,14 @@ config HID_SUNPLUS ---help--- Support for Sunplus wireless desktop. +config HID_RMI + tristate "Synaptics RMI4 device support" + depends on HID + ---help--- + Support for Synaptics RMI4 touchpads. + Say Y here if you have a Synaptics RMI4 touchpads over i2c-hid or usbhid + and want support for its special functionalities. + config HID_GREENASIA tristate "GreenAsia (Product ID 0x12) game controller support" depends on HID diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile index fc712dde02a4..a6fa6baf368e 100644 --- a/drivers/hid/Makefile +++ b/drivers/hid/Makefile @@ -97,6 +97,7 @@ obj-$(CONFIG_HID_ROCCAT) += hid-roccat.o hid-roccat-common.o \ hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \ hid-roccat-koneplus.o hid-roccat-konepure.o hid-roccat-kovaplus.o \ hid-roccat-lua.o hid-roccat-pyra.o hid-roccat-ryos.o hid-roccat-savu.o +obj-$(CONFIG_HID_RMI) += hid-rmi.o obj-$(CONFIG_HID_SAITEK) += hid-saitek.o obj-$(CONFIG_HID_SAMSUNG) += hid-samsung.o obj-$(CONFIG_HID_SMARTJOYPLUS) += hid-sjoy.o diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 9e8064205bc7..f05255d92de7 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1882,6 +1882,8 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGP_MOUSE) }, { HID_USB_DEVICE(USB_VENDOR_ID_STEELSERIES, USB_DEVICE_ID_STEELSERIES_SRWS1) }, { HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) }, + { HID_I2C_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) }, { HID_USB_DEVICE(USB_VENDOR_ID_THINGM, USB_DEVICE_ID_BLINK1) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) }, { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) }, diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c new file mode 100644 index 000000000000..699d631c6920 --- /dev/null +++ b/drivers/hid/hid-rmi.c @@ -0,0 +1,889 @@ +/* + * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com> + * Copyright (c) 2013 Synaptics Incorporated + * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com> + * Copyright (c) 2014 Red Hat, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <linux/kernel.h> +#include <linux/hid.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/module.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/wait.h> +#include <linux/sched.h> +#include "hid-ids.h" + +#define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ +#define RMI_WRITE_REPORT_ID 0x09 /* Output Report */ +#define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */ +#define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */ +#define RMI_ATTN_REPORT_ID 0x0c /* Input Report */ +#define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */ + +/* flags */ +#define RMI_READ_REQUEST_PENDING BIT(0) +#define RMI_READ_DATA_PENDING BIT(1) +#define RMI_STARTED BIT(2) + +enum rmi_mode_type { + RMI_MODE_OFF = 0, + RMI_MODE_ATTN_REPORTS = 1, + RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, +}; + +struct rmi_function { + unsigned page; /* page of the function */ + u16 query_base_addr; /* base address for queries */ + u16 command_base_addr; /* base address for commands */ + u16 control_base_addr; /* base address for controls */ + u16 data_base_addr; /* base address for datas */ + unsigned int interrupt_base; /* cross-function interrupt number + * (uniq in the device)*/ + unsigned int interrupt_count; /* number of interrupts */ + unsigned int report_size; /* size of a report */ + unsigned long irq_mask; /* mask of the interrupts + * (to be applied against ATTN IRQ) */ +}; + +/** + * struct rmi_data - stores information for hid communication + * + * @page_mutex: Locks current page to avoid changing pages in unexpected ways. + * @page: Keeps track of the current virtual page + * + * @wait: Used for waiting for read data + * + * @writeReport: output buffer when writing RMI registers + * @readReport: input buffer when reading RMI registers + * + * @input_report_size: size of an input report (advertised by HID) + * @output_report_size: size of an output report (advertised by HID) + * + * @flags: flags for the current device (started, reading, etc...) + * + * @f11: placeholder of internal RMI function F11 description + * @f30: placeholder of internal RMI function F30 description + * + * @max_fingers: maximum finger count reported by the device + * @max_x: maximum x value reported by the device + * @max_y: maximum y value reported by the device + * + * @gpio_led_count: count of GPIOs + LEDs reported by F30 + * @button_count: actual physical buttons count + * @button_mask: button mask used to decode GPIO ATTN reports + * @button_state_mask: pull state of the buttons + * + * @input: pointer to the kernel input device + * + * @reset_work: worker which will be called in case of a mouse report + * @hdev: pointer to the struct hid_device + */ +struct rmi_data { + struct mutex page_mutex; + int page; + + wait_queue_head_t wait; + + u8 *writeReport; + u8 *readReport; + + int input_report_size; + int output_report_size; + + unsigned long flags; + + struct rmi_function f11; + struct rmi_function f30; + + unsigned int max_fingers; + unsigned int max_x; + unsigned int max_y; + unsigned int x_size_mm; + unsigned int y_size_mm; + + unsigned int gpio_led_count; + unsigned int button_count; + unsigned long button_mask; + unsigned long button_state_mask; + + struct input_dev *input; + + struct work_struct reset_work; + struct hid_device *hdev; +}; + +#define RMI_PAGE(addr) (((addr) >> 8) & 0xff) + +static int rmi_write_report(struct hid_device *hdev, u8 *report, int len); + +/** + * rmi_set_page - Set RMI page + * @hdev: The pointer to the hid_device struct + * @page: The new page address. + * + * RMI devices have 16-bit addressing, but some of the physical + * implementations (like SMBus) only have 8-bit addressing. So RMI implements + * a page address at 0xff of every page so we can reliable page addresses + * every 256 registers. + * + * The page_mutex lock must be held when this function is entered. + * + * Returns zero on success, non-zero on failure. + */ +static int rmi_set_page(struct hid_device *hdev, u8 page) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + int retval; + + data->writeReport[0] = RMI_WRITE_REPORT_ID; + data->writeReport[1] = 1; + data->writeReport[2] = 0xFF; + data->writeReport[4] = page; + + retval = rmi_write_report(hdev, data->writeReport, + data->output_report_size); + if (retval != data->output_report_size) { + dev_err(&hdev->dev, + "%s: set page failed: %d.", __func__, retval); + return retval; + } + + data->page = page; + return 0; +} + +static int rmi_set_mode(struct hid_device *hdev, u8 mode) +{ + int ret; + u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode}; + + ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, txbuf, + sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + if (ret < 0) { + dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode, + ret); + return ret; + } + + return 0; +} + +static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) +{ + int ret; + + ret = hid_hw_output_report(hdev, (void *)report, len); + if (ret < 0) { + dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret); + return ret; + } + + return ret; +} + +static int rmi_read_block(struct hid_device *hdev, u16 addr, void *buf, + const int len) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + int ret; + int bytes_read; + int bytes_needed; + int retries; + int read_input_count; + + mutex_lock(&data->page_mutex); + + if (RMI_PAGE(addr) != data->page) { + ret = rmi_set_page(hdev, RMI_PAGE(addr)); + if (ret < 0) + goto exit; + } + + for (retries = 5; retries > 0; retries--) { + data->writeReport[0] = RMI_READ_ADDR_REPORT_ID; + data->writeReport[1] = 0; /* old 1 byte read count */ + data->writeReport[2] = addr & 0xFF; + data->writeReport[3] = (addr >> 8) & 0xFF; + data->writeReport[4] = len & 0xFF; + data->writeReport[5] = (len >> 8) & 0xFF; + + set_bit(RMI_READ_REQUEST_PENDING, &data->flags); + + ret = rmi_write_report(hdev, data->writeReport, + data->output_report_size); + if (ret != data->output_report_size) { + clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); + dev_err(&hdev->dev, + "failed to write request output report (%d)\n", + ret); + goto exit; + } + + bytes_read = 0; + bytes_needed = len; + while (bytes_read < len) { + if (!wait_event_timeout(data->wait, + test_bit(RMI_READ_DATA_PENDING, &data->flags), + msecs_to_jiffies(1000))) { + hid_warn(hdev, "%s: timeout elapsed\n", + __func__); + ret = -EAGAIN; + break; + } + + read_input_count = data->readReport[1]; + memcpy(buf + bytes_read, &data->readReport[2], + read_input_count < bytes_needed ? + read_input_count : bytes_needed); + + bytes_read += read_input_count; + bytes_needed -= read_input_count; + clear_bit(RMI_READ_DATA_PENDING, &data->flags); + } + + if (ret >= 0) { + ret = 0; + break; + } + } + +exit: + clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); + mutex_unlock(&data->page_mutex); + return ret; +} + +static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf) +{ + return rmi_read_block(hdev, addr, buf, 1); +} + +static void rmi_f11_process_touch(struct rmi_data *hdata, int slot, + u8 finger_state, u8 *touch_data) +{ + int x, y, wx, wy; + int wide, major, minor; + int z; + + input_mt_slot(hdata->input, slot); + input_mt_report_slot_state(hdata->input, MT_TOOL_FINGER, + finger_state == 0x01); + if (finger_state == 0x01) { + x = (touch_data[0] << 4) | (touch_data[2] & 0x07); + y = (touch_data[1] << 4) | (touch_data[2] >> 4); + wx = touch_data[3] & 0x07; + wy = touch_data[3] >> 4; + wide = (wx > wy); + major = max(wx, wy); + minor = min(wx, wy); + z = touch_data[4]; + + /* y is inverted */ + y = hdata->max_y - y; + + input_event(hdata->input, EV_ABS, ABS_MT_POSITION_X, x); + input_event(hdata->input, EV_ABS, ABS_MT_POSITION_Y, y); + input_event(hdata->input, EV_ABS, ABS_MT_ORIENTATION, wide); + input_event(hdata->input, EV_ABS, ABS_MT_PRESSURE, z); + input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MAJOR, major); + input_event(hdata->input, EV_ABS, ABS_MT_TOUCH_MINOR, minor); + } +} + +static void rmi_reset_work(struct work_struct *work) +{ + struct rmi_data *hdata = container_of(work, struct rmi_data, + reset_work); + + /* switch the device to RMI if we receive a generic mouse report */ + rmi_set_mode(hdata->hdev, RMI_MODE_ATTN_REPORTS); +} + +static inline int rmi_schedule_reset(struct hid_device *hdev) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + return schedule_work(&hdata->reset_work); +} + +static int rmi_f11_input_event(struct hid_device *hdev, u8 irq, u8 *data, + int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + int offset; + int i; + + if (size < hdata->f11.report_size) + return 0; + + if (!(irq & hdata->f11.irq_mask)) + return 0; + + offset = (hdata->max_fingers >> 2) + 1; + for (i = 0; i < hdata->max_fingers; i++) { + int fs_byte_position = i >> 2; + int fs_bit_position = (i & 0x3) << 1; + int finger_state = (data[fs_byte_position] >> fs_bit_position) & + 0x03; + + rmi_f11_process_touch(hdata, i, finger_state, + &data[offset + 5 * i]); + } + input_mt_sync_frame(hdata->input); + input_sync(hdata->input); + return hdata->f11.report_size; +} + +static int rmi_f30_input_event(struct hid_device *hdev, u8 irq, u8 *data, + int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + int i; + int button = 0; + bool value; + + if (!(irq & hdata->f30.irq_mask)) + return 0; + + for (i = 0; i < hdata->gpio_led_count; i++) { + if (test_bit(i, &hdata->button_mask)) { + value = (data[i / 8] >> (i & 0x07)) & BIT(0); + if (test_bit(i, &hdata->button_state_mask)) + value = !value; + input_event(hdata->input, EV_KEY, BTN_LEFT + button++, + value); + } + } + return hdata->f30.report_size; +} + +static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + unsigned long irq_mask = 0; + unsigned index = 2; + + if (!(test_bit(RMI_STARTED, &hdata->flags))) + return 0; + + irq_mask |= hdata->f11.irq_mask; + irq_mask |= hdata->f30.irq_mask; + + if (data[1] & ~irq_mask) + hid_warn(hdev, "unknown intr source:%02lx %s:%d\n", + data[1] & ~irq_mask, __FILE__, __LINE__); + + if (hdata->f11.interrupt_base < hdata->f30.interrupt_base) { + index += rmi_f11_input_event(hdev, data[1], &data[index], + size - index); + index += rmi_f30_input_event(hdev, data[1], &data[index], + size - index); + } else { + index += rmi_f30_input_event(hdev, data[1], &data[index], + size - index); + index += rmi_f11_input_event(hdev, data[1], &data[index], + size - index); + } + + return 1; +} + +static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + + if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) { + hid_err(hdev, "no read request pending\n"); + return 0; + } + + memcpy(hdata->readReport, data, size < hdata->input_report_size ? + size : hdata->input_report_size); + set_bit(RMI_READ_DATA_PENDING, &hdata->flags); + wake_up(&hdata->wait); + + return 1; +} + +static int rmi_raw_event(struct hid_device *hdev, + struct hid_report *report, u8 *data, int size) +{ + switch (data[0]) { + case RMI_READ_DATA_REPORT_ID: + return rmi_read_data_event(hdev, data, size); + case RMI_ATTN_REPORT_ID: + return rmi_input_event(hdev, data, size); + case RMI_MOUSE_REPORT_ID: + rmi_schedule_reset(hdev); + break; + } + + return 0; +} + +static int rmi_post_reset(struct hid_device *hdev) +{ + return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); +} + +static int rmi_post_resume(struct hid_device *hdev) +{ + return rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); +} + +#define RMI4_MAX_PAGE 0xff +#define RMI4_PAGE_SIZE 0x0100 + +#define PDT_START_SCAN_LOCATION 0x00e9 +#define PDT_END_SCAN_LOCATION 0x0005 +#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff) + +struct pdt_entry { + u8 query_base_addr:8; + u8 command_base_addr:8; + u8 control_base_addr:8; + u8 data_base_addr:8; + u8 interrupt_source_count:3; + u8 bits3and4:2; + u8 function_version:2; + u8 bit7:1; + u8 function_number:8; +} __attribute__((__packed__)); + +static inline unsigned long rmi_gen_mask(unsigned irq_base, unsigned irq_count) +{ + return GENMASK(irq_count + irq_base - 1, irq_base); +} + +static void rmi_register_function(struct rmi_data *data, + struct pdt_entry *pdt_entry, int page, unsigned interrupt_count) +{ + struct rmi_function *f = NULL; + u16 page_base = page << 8; + + switch (pdt_entry->function_number) { + case 0x11: + f = &data->f11; + break; + case 0x30: + f = &data->f30; + break; + } + + if (f) { + f->page = page; + f->query_base_addr = page_base | pdt_entry->query_base_addr; + f->command_base_addr = page_base | pdt_entry->command_base_addr; + f->control_base_addr = page_base | pdt_entry->control_base_addr; + f->data_base_addr = page_base | pdt_entry->data_base_addr; + f->interrupt_base = interrupt_count; + f->interrupt_count = pdt_entry->interrupt_source_count; + f->irq_mask = rmi_gen_mask(f->interrupt_base, + f->interrupt_count); + } +} + +static int rmi_scan_pdt(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + struct pdt_entry entry; + int page; + bool page_has_function; + int i; + int retval; + int interrupt = 0; + u16 page_start, pdt_start , pdt_end; + + hid_info(hdev, "Scanning PDT...\n"); + + for (page = 0; (page <= RMI4_MAX_PAGE); page++) { + page_start = RMI4_PAGE_SIZE * page; + pdt_start = page_start + PDT_START_SCAN_LOCATION; + pdt_end = page_start + PDT_END_SCAN_LOCATION; + + page_has_function = false; + for (i = pdt_start; i >= pdt_end; i -= sizeof(entry)) { + retval = rmi_read_block(hdev, i, &entry, sizeof(entry)); + if (retval) { + hid_err(hdev, + "Read of PDT entry at %#06x failed.\n", + i); + goto error_exit; + } + + if (RMI4_END_OF_PDT(entry.function_number)) + break; + + page_has_function = true; + + hid_info(hdev, "Found F%02X on page %#04x\n", + entry.function_number, page); + + rmi_register_function(data, &entry, page, interrupt); + interrupt += entry.interrupt_source_count; + } + + if (!page_has_function) + break; + } + + hid_info(hdev, "%s: Done with PDT scan.\n", __func__); + retval = 0; + +error_exit: + return retval; +} + +static int rmi_populate_f11(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + u8 buf[20]; + int ret; + bool has_query12; + bool has_physical_props; + unsigned x_size, y_size; + + if (!data->f11.query_base_addr) { + hid_err(hdev, "No 2D sensor found, giving up.\n"); + return -ENODEV; + } + + /* query 0 contains some useful information */ + ret = rmi_read(hdev, data->f11.query_base_addr, buf); + if (ret) { + hid_err(hdev, "can not get query 0: %d.\n", ret); + return ret; + } + has_query12 = !!(buf[0] & BIT(5)); + + /* query 1 to get the max number of fingers */ + ret = rmi_read(hdev, data->f11.query_base_addr + 1, buf); + if (ret) { + hid_err(hdev, "can not get NumberOfFingers: %d.\n", ret); + return ret; + } + data->max_fingers = (buf[0] & 0x07) + 1; + if (data->max_fingers > 5) + data->max_fingers = 10; + + data->f11.report_size = data->max_fingers * 5 + + DIV_ROUND_UP(data->max_fingers, 4); + + if (!(buf[0] & BIT(4))) { + hid_err(hdev, "No absolute events, giving up.\n"); + return -ENODEV; + } + + /* + * query 12 to know if the physical properties are reported + * (query 12 is at offset 10 for HID devices) + */ + if (has_query12) { + ret = rmi_read(hdev, data->f11.query_base_addr + 10, buf); + if (ret) { + hid_err(hdev, "can not get query 12: %d.\n", ret); + return ret; + } + has_physical_props = !!(buf[0] & BIT(5)); + + if (has_physical_props) { + ret = rmi_read_block(hdev, + data->f11.query_base_addr + 11, buf, 4); + if (ret) { + hid_err(hdev, "can not read query 15-18: %d.\n", + ret); + return ret; + } + + x_size = buf[0] | (buf[1] << 8); + y_size = buf[2] | (buf[3] << 8); + + data->x_size_mm = DIV_ROUND_CLOSEST(x_size, 10); + data->y_size_mm = DIV_ROUND_CLOSEST(y_size, 10); + + hid_info(hdev, "%s: size in mm: %d x %d\n", + __func__, data->x_size_mm, data->y_size_mm); + } + } + + /* retrieve the ctrl registers */ + ret = rmi_read_block(hdev, data->f11.control_base_addr, buf, 20); + if (ret) { + hid_err(hdev, "can not read ctrl block of size 20: %d.\n", ret); + return ret; + } + + data->max_x = buf[6] | (buf[7] << 8); + data->max_y = buf[8] | (buf[9] << 8); + + return 0; +} + +static int rmi_populate_f30(struct hid_device *hdev) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + u8 buf[20]; + int ret; + bool has_gpio, has_led; + unsigned bytes_per_ctrl; + u8 ctrl2_addr; + int ctrl2_3_length; + int i; + + /* function F30 is for physical buttons */ + if (!data->f30.query_base_addr) { + hid_err(hdev, "No GPIO/LEDs found, giving up.\n"); + return -ENODEV; + } + + ret = rmi_read_block(hdev, data->f30.query_base_addr, buf, 2); + if (ret) { + hid_err(hdev, "can not get F30 query registers: %d.\n", ret); + return ret; + } + + has_gpio = !!(buf[0] & BIT(3)); + has_led = !!(buf[0] & BIT(2)); + data->gpio_led_count = buf[1] & 0x1f; + + /* retrieve ctrl 2 & 3 registers */ + bytes_per_ctrl = (data->gpio_led_count + 7) / 8; + /* Ctrl0 is present only if both has_gpio and has_led are set*/ + ctrl2_addr = (has_gpio && has_led) ? bytes_per_ctrl : 0; + /* Ctrl1 is always be present */ + ctrl2_addr += bytes_per_ctrl; + ctrl2_3_length = 2 * bytes_per_ctrl; + + data->f30.report_size = bytes_per_ctrl; + + ret = rmi_read_block(hdev, data->f30.control_base_addr + ctrl2_addr, + buf, ctrl2_3_length); + if (ret) { + hid_err(hdev, "can not read ctrl 2&3 block of size %d: %d.\n", + ctrl2_3_length, ret); + return ret; + } + + for (i = 0; i < data->gpio_led_count; i++) { + int byte_position = i >> 3; + int bit_position = i & 0x07; + u8 dir_byte = buf[byte_position]; + u8 data_byte = buf[byte_position + bytes_per_ctrl]; + bool dir = (dir_byte >> bit_position) & BIT(0); + bool dat = (data_byte >> bit_position) & BIT(0); + + if (dir == 0) { + /* input mode */ + if (dat) { + /* actual buttons have pull up resistor */ + data->button_count++; + set_bit(i, &data->button_mask); + set_bit(i, &data->button_state_mask); + } + } + + } + + return 0; +} + +static int rmi_populate(struct hid_device *hdev) +{ + int ret; + + ret = rmi_scan_pdt(hdev); + if (ret) { + hid_err(hdev, "PDT scan failed with code %d.\n", ret); + return ret; + } + + ret = rmi_populate_f11(hdev); + if (ret) { + hid_err(hdev, "Error while initializing F11 (%d).\n", ret); + return ret; + } + + ret = rmi_populate_f30(hdev); + if (ret) + hid_warn(hdev, "Error while initializing F30 (%d).\n", ret); + + return 0; +} + +static void rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) +{ + struct rmi_data *data = hid_get_drvdata(hdev); + struct input_dev *input = hi->input; + int ret; + int res_x, res_y, i; + + data->input = input; + + hid_dbg(hdev, "Opening low level driver\n"); + ret = hid_hw_open(hdev); + if (ret) + return; + + /* Allow incoming hid reports */ + hid_device_io_start(hdev); + + ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); + if (ret < 0) { + dev_err(&hdev->dev, "failed to set rmi mode\n"); + goto exit; + } + + ret = rmi_set_page(hdev, 0); + if (ret < 0) { + dev_err(&hdev->dev, "failed to set page select to 0.\n"); + goto exit; + } + + ret = rmi_populate(hdev); + if (ret) + goto exit; + + __set_bit(EV_ABS, input->evbit); + input_set_abs_params(input, ABS_MT_POSITION_X, 1, data->max_x, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 1, data->max_y, 0, 0); + + if (data->x_size_mm && data->x_size_mm) { + res_x = (data->max_x - 1) / data->x_size_mm; + res_y = (data->max_y - 1) / data->x_size_mm; + + input_abs_set_res(input, ABS_MT_POSITION_X, res_x); + input_abs_set_res(input, ABS_MT_POSITION_Y, res_y); + } + + input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0); + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xff, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 0x0f, 0, 0); + input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 0x0f, 0, 0); + + input_mt_init_slots(input, data->max_fingers, INPUT_MT_POINTER); + + if (data->button_count) { + __set_bit(EV_KEY, input->evbit); + for (i = 0; i < data->button_count; i++) + __set_bit(BTN_LEFT + i, input->keybit); + + if (data->button_count == 1) + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit); + } + + set_bit(RMI_STARTED, &data->flags); + +exit: + hid_device_io_stop(hdev); + hid_hw_close(hdev); +} + +static int rmi_input_mapping(struct hid_device *hdev, + struct hid_input *hi, struct hid_field *field, + struct hid_usage *usage, unsigned long **bit, int *max) +{ + /* we want to make HID ignore the advertised HID collection */ + return -1; +} + +static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) +{ + struct rmi_data *data = NULL; + int ret; + size_t alloc_size; + + data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + INIT_WORK(&data->reset_work, rmi_reset_work); + data->hdev = hdev; + + hid_set_drvdata(hdev, data); + + hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS; + + ret = hid_parse(hdev); + if (ret) { + hid_err(hdev, "parse failed\n"); + return ret; + } + + data->input_report_size = (hdev->report_enum[HID_INPUT_REPORT] + .report_id_hash[RMI_ATTN_REPORT_ID]->size >> 3) + + 1 /* report id */; + data->output_report_size = (hdev->report_enum[HID_OUTPUT_REPORT] + .report_id_hash[RMI_WRITE_REPORT_ID]->size >> 3) + + 1 /* report id */; + + alloc_size = data->output_report_size + data->input_report_size; + + data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); + if (!data->writeReport) { + ret = -ENOMEM; + return ret; + } + + data->readReport = data->writeReport + data->output_report_size; + + init_waitqueue_head(&data->wait); + + mutex_init(&data->page_mutex); + + ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); + if (ret) { + hid_err(hdev, "hw start failed\n"); + return ret; + } + + if (!test_bit(RMI_STARTED, &data->flags)) { + hid_hw_stop(hdev); + return -EIO; + } + + hid_hw_stop(hdev); + return 0; +} + +static void rmi_remove(struct hid_device *hdev) +{ + struct rmi_data *hdata = hid_get_drvdata(hdev); + + clear_bit(RMI_STARTED, &hdata->flags); + + hid_hw_stop(hdev); +} + +static const struct hid_device_id rmi_id[] = { + { HID_I2C_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) }, + { HID_USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, HID_ANY_ID) }, + { } +}; +MODULE_DEVICE_TABLE(hid, rmi_id); + +static struct hid_driver rmi_driver = { + .name = "hid-rmi", + .id_table = rmi_id, + .probe = rmi_probe, + .remove = rmi_remove, + .raw_event = rmi_raw_event, + .input_mapping = rmi_input_mapping, + .input_configured = rmi_input_configured, +#ifdef CONFIG_PM + .resume = rmi_post_resume, + .reset_resume = rmi_post_reset, +#endif +}; + +module_hid_driver(rmi_driver); + +MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>"); +MODULE_DESCRIPTION("RMI HID driver"); +MODULE_LICENSE("GPL"); |