diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/devices/m25p80.c | 121 | ||||
| -rw-r--r-- | drivers/mtd/devices/serial_flash_cmds.h | 1 | ||||
| -rw-r--r-- | drivers/mtd/devices/st_spi_fsm.c | 4 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/aspeed-smc.c | 183 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/atmel-quadspi.c | 83 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/cadence-quadspi.c | 20 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/fsl-quadspi.c | 6 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/hisi-sfc.c | 31 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/intel-spi.c | 7 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/mtk-quadspi.c | 15 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/nxp-spifi.c | 22 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/spi-nor.c | 488 | ||||
| -rw-r--r-- | drivers/mtd/spi-nor/stm32-quadspi.c | 32 |
14 files changed, 785 insertions, 230 deletions
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c4df3b1bded0..00eea6fd379c 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -78,11 +78,17 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; - struct spi_transfer t[2] = {}; + unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; + struct spi_transfer t[3] = {}; struct spi_message m; int cmd_sz = m25p_cmdsz(nor); ssize_t ret; + /* get transfer protocols. */ + inst_nbits = spi_nor_get_protocol_inst_nbits(nor->write_proto); + addr_nbits = spi_nor_get_protocol_addr_nbits(nor->write_proto); + data_nbits = spi_nor_get_protocol_data_nbits(nor->write_proto); + spi_message_init(&m); if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) @@ -92,12 +98,27 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, m25p_addr2cmd(nor, to, flash->command); t[0].tx_buf = flash->command; + t[0].tx_nbits = inst_nbits; t[0].len = cmd_sz; spi_message_add_tail(&t[0], &m); - t[1].tx_buf = buf; - t[1].len = len; - spi_message_add_tail(&t[1], &m); + /* split the op code and address bytes into two transfers if needed. */ + data_idx = 1; + if (addr_nbits != inst_nbits) { + t[0].len = 1; + + t[1].tx_buf = &flash->command[1]; + t[1].tx_nbits = addr_nbits; + t[1].len = cmd_sz - 1; + spi_message_add_tail(&t[1], &m); + + data_idx = 2; + } + + t[data_idx].tx_buf = buf; + t[data_idx].tx_nbits = data_nbits; + t[data_idx].len = len; + spi_message_add_tail(&t[data_idx], &m); ret = spi_sync(spi, &m); if (ret) @@ -109,18 +130,6 @@ static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len, return ret; } -static inline unsigned int m25p80_rx_nbits(struct spi_nor *nor) -{ - switch (nor->flash_read) { - case SPI_NOR_DUAL: - return 2; - case SPI_NOR_QUAD: - return 4; - default: - return 0; - } -} - /* * Read an address range from the nor chip. The address range * may be any size provided it is within the physical boundaries. @@ -130,13 +139,20 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, { struct m25p *flash = nor->priv; struct spi_device *spi = flash->spi; - struct spi_transfer t[2]; + unsigned int inst_nbits, addr_nbits, data_nbits, data_idx; + struct spi_transfer t[3]; struct spi_message m; unsigned int dummy = nor->read_dummy; ssize_t ret; + int cmd_sz; + + /* get transfer protocols. */ + inst_nbits = spi_nor_get_protocol_inst_nbits(nor->read_proto); + addr_nbits = spi_nor_get_protocol_addr_nbits(nor->read_proto); + data_nbits = spi_nor_get_protocol_data_nbits(nor->read_proto); /* convert the dummy cycles to the number of bytes */ - dummy /= 8; + dummy = (dummy * addr_nbits) / 8; if (spi_flash_read_supported(spi)) { struct spi_flash_read_message msg; @@ -149,10 +165,9 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, msg.read_opcode = nor->read_opcode; msg.addr_width = nor->addr_width; msg.dummy_bytes = dummy; - /* TODO: Support other combinations */ - msg.opcode_nbits = SPI_NBITS_SINGLE; - msg.addr_nbits = SPI_NBITS_SINGLE; - msg.data_nbits = m25p80_rx_nbits(nor); + msg.opcode_nbits = inst_nbits; + msg.addr_nbits = addr_nbits; + msg.data_nbits = data_nbits; ret = spi_flash_read(spi, &msg); if (ret < 0) @@ -167,20 +182,45 @@ static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len, m25p_addr2cmd(nor, from, flash->command); t[0].tx_buf = flash->command; + t[0].tx_nbits = inst_nbits; t[0].len = m25p_cmdsz(nor) + dummy; spi_message_add_tail(&t[0], &m); - t[1].rx_buf = buf; - t[1].rx_nbits = m25p80_rx_nbits(nor); - t[1].len = min3(len, spi_max_transfer_size(spi), - spi_max_message_size(spi) - t[0].len); - spi_message_add_tail(&t[1], &m); + /* + * Set all dummy/mode cycle bits to avoid sending some manufacturer + * specific pattern, which might make the memory enter its Continuous + * Read mode by mistake. + * Based on the different mode cycle bit patterns listed and described + * in the JESD216B specification, the 0xff value works for all memories + * and all manufacturers. + */ + cmd_sz = t[0].len; + memset(flash->command + cmd_sz - dummy, 0xff, dummy); + + /* split the op code and address bytes into two transfers if needed. */ + data_idx = 1; + if (addr_nbits != inst_nbits) { + t[0].len = 1; + + t[1].tx_buf = &flash->command[1]; + t[1].tx_nbits = addr_nbits; + t[1].len = cmd_sz - 1; + spi_message_add_tail(&t[1], &m); + + data_idx = 2; + } + + t[data_idx].rx_buf = buf; + t[data_idx].rx_nbits = data_nbits; + t[data_idx].len = min3(len, spi_max_transfer_size(spi), + spi_max_message_size(spi) - cmd_sz); + spi_message_add_tail(&t[data_idx], &m); ret = spi_sync(spi, &m); if (ret) return ret; - ret = m.actual_length - m25p_cmdsz(nor) - dummy; + ret = m.actual_length - cmd_sz; if (ret < 0) return -EIO; return ret; @@ -196,7 +236,11 @@ static int m25p_probe(struct spi_device *spi) struct flash_platform_data *data; struct m25p *flash; struct spi_nor *nor; - enum read_mode mode = SPI_NOR_NORMAL; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; char *flash_name; int ret; @@ -221,10 +265,19 @@ static int m25p_probe(struct spi_device *spi) spi_set_drvdata(spi, flash); flash->spi = spi; - if (spi->mode & SPI_RX_QUAD) - mode = SPI_NOR_QUAD; - else if (spi->mode & SPI_RX_DUAL) - mode = SPI_NOR_DUAL; + if (spi->mode & SPI_RX_QUAD) { + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; + + if (spi->mode & SPI_TX_QUAD) + hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 | + SNOR_HWCAPS_PP_1_1_4 | + SNOR_HWCAPS_PP_1_4_4); + } else if (spi->mode & SPI_RX_DUAL) { + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + + if (spi->mode & SPI_TX_DUAL) + hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2; + } if (data && data->name) nor->mtd.name = data->name; @@ -241,7 +294,7 @@ static int m25p_probe(struct spi_device *spi) else flash_name = spi->modalias; - ret = spi_nor_scan(nor, flash_name, mode); + ret = spi_nor_scan(nor, flash_name, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/devices/serial_flash_cmds.h b/drivers/mtd/devices/serial_flash_cmds.h index 8b81e15105dd..eba125c9f23f 100644 --- a/drivers/mtd/devices/serial_flash_cmds.h +++ b/drivers/mtd/devices/serial_flash_cmds.h @@ -13,7 +13,6 @@ #define _MTD_SERIAL_FLASH_CMDS_H /* Generic Flash Commands/OPCODEs */ -#define SPINOR_OP_RDSR2 0x35 #define SPINOR_OP_WRVCR 0x81 #define SPINOR_OP_RDVCR 0x85 diff --git a/drivers/mtd/devices/st_spi_fsm.c b/drivers/mtd/devices/st_spi_fsm.c index 804313a33f2b..21afd94cd904 100644 --- a/drivers/mtd/devices/st_spi_fsm.c +++ b/drivers/mtd/devices/st_spi_fsm.c @@ -1445,7 +1445,7 @@ static int stfsm_s25fl_config(struct stfsm *fsm) } /* Check status of 'QE' bit, update if required. */ - stfsm_read_status(fsm, SPINOR_OP_RDSR2, &cr1, 1); + stfsm_read_status(fsm, SPINOR_OP_RDCR, &cr1, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { if (!(cr1 & STFSM_S25FL_CONFIG_QE)) { @@ -1490,7 +1490,7 @@ static int stfsm_w25q_config(struct stfsm *fsm) return ret; /* Check status of 'QE' bit, update if required. */ - stfsm_read_status(fsm, SPINOR_OP_RDSR2, &sr2, 1); + stfsm_read_status(fsm, SPINOR_OP_RDCR, &sr2, 1); data_pads = ((fsm->stfsm_seq_read.seq_cfg >> 16) & 0x3) + 1; if (data_pads == 4) { if (!(sr2 & W25Q_STATUS_QE)) { diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig index bfdfb1e72b38..293c8a4d1e49 100644 --- a/drivers/mtd/spi-nor/Kconfig +++ b/drivers/mtd/spi-nor/Kconfig @@ -108,7 +108,7 @@ config SPI_INTEL_SPI_PLATFORM config SPI_STM32_QUADSPI tristate "STM32 Quad SPI controller" - depends on ARCH_STM32 + depends on ARCH_STM32 || COMPILE_TEST help This enables support for the STM32 Quad SPI controller. We only connect the NOR to this controller. diff --git a/drivers/mtd/spi-nor/aspeed-smc.c b/drivers/mtd/spi-nor/aspeed-smc.c index 56051d30f000..0106357421bd 100644 --- a/drivers/mtd/spi-nor/aspeed-smc.c +++ b/drivers/mtd/spi-nor/aspeed-smc.c @@ -19,6 +19,7 @@ #include <linux/mtd/spi-nor.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/sizes.h> #include <linux/sysfs.h> #define DEVICE_NAME "aspeed-smc" @@ -97,6 +98,7 @@ struct aspeed_smc_chip { struct aspeed_smc_controller *controller; void __iomem *ctl; /* control register */ void __iomem *ahb_base; /* base of chip window */ + u32 ahb_window_size; /* chip mapping window size */ u32 ctl_val[smc_max]; /* control settings */ enum aspeed_smc_flash_type type; /* what type of flash */ struct spi_nor nor; @@ -109,6 +111,7 @@ struct aspeed_smc_controller { const struct aspeed_smc_info *info; /* type info of controller */ void __iomem *regs; /* controller registers */ void __iomem *ahb_base; /* per-chip windows resource */ + u32 ahb_window_size; /* full mapping window size */ struct aspeed_smc_chip *chips[0]; /* pointers to attached chips */ }; @@ -180,8 +183,7 @@ struct aspeed_smc_controller { #define CONTROL_KEEP_MASK \ (CONTROL_AAF_MODE | CONTROL_CE_INACTIVE_MASK | CONTROL_CLK_DIV4 | \ - CONTROL_IO_DUMMY_MASK | CONTROL_CLOCK_FREQ_SEL_MASK | \ - CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) + CONTROL_CLOCK_FREQ_SEL_MASK | CONTROL_LSB_FIRST | CONTROL_CLOCK_MODE_3) /* * The Segment Register uses a 8MB unit to encode the start address @@ -194,6 +196,10 @@ struct aspeed_smc_controller { #define SEGMENT_ADDR_REG0 0x30 #define SEGMENT_ADDR_START(_r) ((((_r) >> 16) & 0xFF) << 23) #define SEGMENT_ADDR_END(_r) ((((_r) >> 24) & 0xFF) << 23) +#define SEGMENT_ADDR_VALUE(start, end) \ + (((((start) >> 23) & 0xFF) << 16) | ((((end) >> 23) & 0xFF) << 24)) +#define SEGMENT_ADDR_REG(controller, cs) \ + ((controller)->regs + SEGMENT_ADDR_REG0 + (cs) * 4) /* * In user mode all data bytes read or written to the chip decode address @@ -439,8 +445,7 @@ static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, u32 reg; if (controller->info->nce > 1) { - reg = readl(controller->regs + SEGMENT_ADDR_REG0 + - chip->cs * 4); + reg = readl(SEGMENT_ADDR_REG(controller, chip->cs)); if (SEGMENT_ADDR_START(reg) >= SEGMENT_ADDR_END(reg)) return NULL; @@ -451,6 +456,146 @@ static void __iomem *aspeed_smc_chip_base(struct aspeed_smc_chip *chip, return controller->ahb_base + offset; } +static u32 aspeed_smc_ahb_base_phy(struct aspeed_smc_controller *controller) +{ + u32 seg0_val = readl(SEGMENT_ADDR_REG(controller, 0)); + + return SEGMENT_ADDR_START(seg0_val); +} + +static u32 chip_set_segment(struct aspeed_smc_chip *chip, u32 cs, u32 start, + u32 size) +{ + struct aspeed_smc_controller *controller = chip->controller; + void __iomem *seg_reg; + u32 seg_oldval, seg_newval, ahb_base_phy, end; + + ahb_base_phy = aspeed_smc_ahb_base_phy(controller); + + seg_reg = SEGMENT_ADDR_REG(controller, cs); + seg_oldval = readl(seg_reg); + + /* + * If the chip size is not specified, use the default segment + * size, but take into account the possible overlap with the + * previous segment + */ + if (!size) + size = SEGMENT_ADDR_END(seg_oldval) - start; + + /* + * The segment cannot exceed the maximum window size of the + * controller. + */ + if (start + size > ahb_base_phy + controller->ahb_window_size) { + size = ahb_base_phy + controller->ahb_window_size - start; + dev_warn(chip->nor.dev, "CE%d window resized to %dMB", + cs, size >> 20); + } + + end = start + size; + seg_newval = SEGMENT_ADDR_VALUE(start, end); + writel(seg_newval, seg_reg); + + /* + * Restore default value if something goes wrong. The chip + * might have set some bogus value and we would loose access + * to the chip. + */ + if (seg_newval != readl(seg_reg)) { + dev_err(chip->nor.dev, "CE%d window invalid", cs); + writel(seg_oldval, seg_reg); + start = SEGMENT_ADDR_START(seg_oldval); + end = SEGMENT_ADDR_END(seg_oldval); + size = end - start; + } + + dev_info(chip->nor.dev, "CE%d window [ 0x%.8x - 0x%.8x ] %dMB", + cs, start, end, size >> 20); + + return size; +} + +/* + * The segment register defines the mapping window on the AHB bus and + * it needs to be configured depending on the chip size. The segment + * register of the following CE also needs to be tuned in order to + * provide a contiguous window across multiple chips. + * + * This is expected to be called in increasing CE order + */ +static u32 aspeed_smc_chip_set_segment(struct aspeed_smc_chip *chip) +{ + struct aspeed_smc_controller *controller = chip->controller; + u32 ahb_base_phy, start; + u32 size = chip->nor.mtd.size; + + /* + * Each controller has a chip size limit for direct memory + * access + */ + if (size > controller->info->maxsize) + size = controller->info->maxsize; + + /* + * The AST2400 SPI controller only handles one chip and does + * not have segment registers. Let's use the chip size for the + * AHB window. + */ + if (controller->info == &spi_2400_info) + goto out; + + /* + * The AST2500 SPI controller has a HW bug when the CE0 chip + * size reaches 128MB. Enforce a size limit of 120MB to + * prevent the controller from using bogus settings in the + * segment register. + */ + if (chip->cs == 0 && controller->info == &spi_2500_info && + size == SZ_128M) { + size = 120 << 20; + dev_info(chip->nor.dev, + "CE%d window resized to %dMB (AST2500 HW quirk)", + chip->cs, size >> 20); + } + + ahb_base_phy = aspeed_smc_ahb_base_phy(controller); + + /* + * As a start address for the current segment, use the default + * start address if we are handling CE0 or use the previous + * segment ending address + */ + if (chip->cs) { + u32 prev = readl(SEGMENT_ADDR_REG(controller, chip->cs - 1)); + + start = SEGMENT_ADDR_END(prev); + } else { + start = ahb_base_phy; + } + + size = chip_set_segment(chip, chip->cs, start, size); + + /* Update chip base address on the AHB bus */ + chip->ahb_base = controller->ahb_base + (start - ahb_base_phy); + + /* + * Now, make sure the next segment does not overlap with the + * current one we just configured, even if there is no + * available chip. That could break access in Command Mode. + */ + if (chip->cs < controller->info->nce - 1) + chip_set_segment(chip, chip->cs + 1, start + size, 0); + +out: + if (size < chip->nor.mtd.size) + dev_warn(chip->nor.dev, + "CE%d window too small for chip %dMB", + chip->cs, (u32)chip->nor.mtd.size >> 20); + + return size; +} + static void aspeed_smc_chip_enable_write(struct aspeed_smc_chip *chip) { struct aspeed_smc_controller *controller = chip->controller; @@ -524,7 +669,7 @@ static int aspeed_smc_chip_setup_init(struct aspeed_smc_chip *chip, */ chip->ahb_base = aspeed_smc_chip_base(chip, res); if (!chip->ahb_base) { - dev_warn(chip->nor.dev, "CE segment window closed.\n"); + dev_warn(chip->nor.dev, "CE%d window closed", chip->cs); return -EINVAL; } @@ -571,6 +716,9 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) if (chip->nor.addr_width == 4 && info->set_4b) info->set_4b(chip); + /* This is for direct AHB access when using Command Mode. */ + chip->ahb_window_size = aspeed_smc_chip_set_segment(chip); + /* * base mode has not been optimized yet. use it for writes. */ @@ -585,14 +733,12 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) * TODO: Adjust clocks if fast read is supported and interpret * SPI-NOR flags to adjust controller settings. */ - switch (chip->nor.flash_read) { - case SPI_NOR_NORMAL: - cmd = CONTROL_COMMAND_MODE_NORMAL; - break; - case SPI_NOR_FAST: - cmd = CONTROL_COMMAND_MODE_FREAD; - break; - default: + if (chip->nor.read_proto == SNOR_PROTO_1_1_1) { + if (chip->nor.read_dummy == 0) + cmd = CONTROL_COMMAND_MODE_NORMAL; + else + cmd = CONTROL_COMMAND_MODE_FREAD; + } else { dev_err(chip->nor.dev, "unsupported SPI read mode\n"); return -EINVAL; } @@ -608,6 +754,11 @@ static int aspeed_smc_chip_setup_finish(struct aspeed_smc_chip *chip) static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, struct device_node *np, struct resource *r) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; const struct aspeed_smc_info *info = controller->info; struct device *dev = controller->dev; struct device_node *child; @@ -671,11 +822,11 @@ static int aspeed_smc_setup_flash(struct aspeed_smc_controller *controller, break; /* - * TODO: Add support for SPI_NOR_QUAD and SPI_NOR_DUAL + * TODO: Add support for Dual and Quad SPI protocols * attach when board support is present as determined * by of property. */ - ret = spi_nor_scan(nor, NULL, SPI_NOR_NORMAL); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) break; @@ -731,6 +882,8 @@ static int aspeed_smc_probe(struct platform_device *pdev) if (IS_ERR(controller->ahb_base)) return PTR_ERR(controller->ahb_base); + controller->ahb_window_size = resource_size(res); + ret = aspeed_smc_setup_flash(controller, np, res); if (ret) dev_err(dev, "Aspeed SMC probe failed %d\n", ret); diff --git a/drivers/mtd/spi-nor/atmel-quadspi.c b/drivers/mtd/spi-nor/atmel-quadspi.c index 47937d9beec6..ba76fa8f2031 100644 --- a/drivers/mtd/spi-nor/atmel-quadspi.c +++ b/drivers/mtd/spi-nor/atmel-quadspi.c @@ -275,14 +275,48 @@ static void atmel_qspi_debug_command(struct atmel_qspi *aq, static int atmel_qspi_run_command(struct atmel_qspi *aq, const struct atmel_qspi_command *cmd, - u32 ifr_tfrtyp, u32 ifr_width) + u32 ifr_tfrtyp, enum spi_nor_protocol proto) { u32 iar, icr, ifr, sr; int err = 0; iar = 0; icr = 0; - ifr = ifr_tfrtyp | ifr_width; + ifr = ifr_tfrtyp; + + /* Set the SPI protocol */ + switch (proto) { + case SNOR_PROTO_1_1_1: + ifr |= QSPI_IFR_WIDTH_SINGLE_BIT_SPI; + break; + + case SNOR_PROTO_1_1_2: + ifr |= QSPI_IFR_WIDTH_DUAL_OUTPUT; + break; + + case SNOR_PROTO_1_1_4: + ifr |= QSPI_IFR_WIDTH_QUAD_OUTPUT; + break; + + case SNOR_PROTO_1_2_2: + ifr |= QSPI_IFR_WIDTH_DUAL_IO; + break; + + case SNOR_PROTO_1_4_4: + ifr |= QSPI_IFR_WIDTH_QUAD_IO; + break; + + case SNOR_PROTO_2_2_2: + ifr |= QSPI_IFR_WIDTH_DUAL_CMD; + break; + + case SNOR_PROTO_4_4_4: + ifr |= QSPI_IFR_WIDTH_QUAD_CMD; + break; + + default: + return -EINVAL; + } /* Compute instruction parameters */ if (cmd->enable.bits.instruction) { @@ -434,7 +468,7 @@ static int atmel_qspi_read_reg(struct spi_nor *nor, u8 opcode, cmd.rx_buf = buf; cmd.buf_len = len; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode, @@ -450,7 +484,7 @@ static int atmel_qspi_write_reg(struct spi_nor *nor, u8 opcode, cmd.tx_buf = buf; cmd.buf_len = len; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len, @@ -469,7 +503,7 @@ static ssize_t atmel_qspi_write(struct spi_nor *nor, loff_t to, size_t len, cmd.tx_buf = write_buf; cmd.buf_len = len; ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->write_proto); return (ret < 0) ? ret : len; } @@ -484,7 +518,7 @@ static int atmel_qspi_erase(struct spi_nor *nor, loff_t offs) cmd.instruction = nor->erase_opcode; cmd.address = (u32)offs; return atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_WRITE, - QSPI_IFR_WIDTH_SINGLE_BIT_SPI); + nor->reg_proto); } static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, @@ -493,27 +527,8 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, struct atmel_qspi *aq = nor->priv; struct atmel_qspi_command cmd; u8 num_mode_cycles, num_dummy_cycles; - u32 ifr_width; ssize_t ret; - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: - ifr_width = QSPI_IFR_WIDTH_SINGLE_BIT_SPI; - break; - - case SPI_NOR_DUAL: - ifr_width = QSPI_IFR_WIDTH_DUAL_OUTPUT; - break; - - case SPI_NOR_QUAD: - ifr_width = QSPI_IFR_WIDTH_QUAD_OUTPUT; - break; - - default: - return -EINVAL; - } - if (nor->read_dummy >= 2) { num_mode_cycles = 2; num_dummy_cycles = nor->read_dummy - 2; @@ -536,7 +551,7 @@ static ssize_t atmel_qspi_read(struct spi_nor *nor, loff_t from, size_t len, cmd.rx_buf = read_buf; cmd.buf_len = len; ret = atmel_qspi_run_command(aq, &cmd, QSPI_IFR_TFRTYP_TRSFR_READ_MEM, - ifr_width); + nor->read_proto); return (ret < 0) ? ret : len; } @@ -590,6 +605,20 @@ static irqreturn_t atmel_qspi_interrupt(int irq, void *dev_id) static int atmel_qspi_probe(struct platform_device *pdev) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_2_2 | + SNOR_HWCAPS_READ_2_2_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_READ_1_4_4 | + SNOR_HWCAPS_READ_4_4_4 | + SNOR_HWCAPS_PP | + SNOR_HWCAPS_PP_1_1_4 | + SNOR_HWCAPS_PP_1_4_4 | + SNOR_HWCAPS_PP_4_4_4, + }; struct device_node *child, *np = pdev->dev.of_node; struct atmel_qspi *aq; struct resource *res; @@ -679,7 +708,7 @@ static int atmel_qspi_probe(struct platform_device *pdev) if (err) goto disable_clk; - err = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + err = spi_nor_scan(nor, NULL, &hwcaps); if (err) goto disable_clk; diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 9f8102de1b16..53c7d8e0327a 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -855,15 +855,14 @@ static int cqspi_set_protocol(struct spi_nor *nor, const int read) f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; if (read) { - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (nor->read_proto) { + case SNOR_PROTO_1_1_1: f_pdata->data_width = CQSPI_INST_TYPE_SINGLE; break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: f_pdata->data_width = CQSPI_INST_TYPE_DUAL; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: f_pdata->data_width = CQSPI_INST_TYPE_QUAD; break; default: @@ -1069,6 +1068,13 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct platform_device *pdev = cqspi->pdev; struct device *dev = &pdev->dev; struct cqspi_flash_pdata *f_pdata; @@ -1123,7 +1129,7 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) goto err; } - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) goto err; @@ -1277,7 +1283,7 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { #define CQSPI_DEV_PM_OPS NULL #endif -static struct of_device_id const cqspi_dt_ids[] = { +static const struct of_device_id cqspi_dt_ids[] = { {.compatible = "cdns,qspi-nor",}, { /* end of table */ } }; diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index 1476135e0d50..f17d22435bfc 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -957,6 +957,10 @@ static void fsl_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) static int fsl_qspi_probe(struct platform_device *pdev) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct device_node *np = pdev->dev.of_node; struct device *dev = &pdev->dev; struct fsl_qspi *q; @@ -1065,7 +1069,7 @@ static int fsl_qspi_probe(struct platform_device *pdev) /* set the chip address for READID */ fsl_qspi_set_base_addr(q, nor); - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) goto mutex_failed; diff --git a/drivers/mtd/spi-nor/hisi-sfc.c b/drivers/mtd/spi-nor/hisi-sfc.c index a286350627a6..d1106832b9d5 100644 --- a/drivers/mtd/spi-nor/hisi-sfc.c +++ b/drivers/mtd/spi-nor/hisi-sfc.c @@ -120,19 +120,24 @@ static inline int wait_op_finish(struct hifmc_host *host) (reg & FMC_INT_OP_DONE), 0, FMC_WAIT_TIMEOUT); } -static int get_if_type(enum read_mode flash_read) +static int get_if_type(enum spi_nor_protocol proto) { enum hifmc_iftype if_type; - switch (flash_read) { - case SPI_NOR_DUAL: + switch (proto) { + case SNOR_PROTO_1_1_2: if_type = IF_TYPE_DUAL; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_2_2: + if_type = IF_TYPE_DIO; + break; + case SNOR_PROTO_1_1_4: if_type = IF_TYPE_QUAD; break; - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + case SNOR_PROTO_1_4_4: + if_type = IF_TYPE_QIO; + break; + case SNOR_PROTO_1_1_1: default: if_type = IF_TYPE_STD; break; @@ -253,7 +258,10 @@ static int hisi_spi_nor_dma_transfer(struct spi_nor *nor, loff_t start_off, writel(FMC_DMA_LEN_SET(len), host->regbase + FMC_DMA_LEN); reg = OP_CFG_FM_CS(priv->chipselect); - if_type = get_if_type(nor->flash_read); + if (op_type == FMC_OP_READ) + if_type = get_if_type(nor->read_proto); + else + if_type = get_if_type(nor->write_proto); reg |= OP_CFG_MEM_IF_TYPE(if_type); if (op_type == FMC_OP_READ) reg |= OP_CFG_DUMMY_NUM(nor->read_dummy >> 3); @@ -321,6 +329,13 @@ static ssize_t hisi_spi_nor_write(struct spi_nor *nor, loff_t to, static int hisi_spi_nor_register(struct device_node *np, struct hifmc_host *host) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_READ_1_1_4 | + SNOR_HWCAPS_PP, + }; struct device *dev = host->dev; struct spi_nor *nor; struct hifmc_priv *priv; @@ -362,7 +377,7 @@ static int hisi_spi_nor_register(struct device_node *np, nor->read = hisi_spi_nor_read; nor->write = hisi_spi_nor_write; nor->erase = NULL; - ret = spi_nor_scan(nor, NULL, SPI_NOR_QUAD); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/spi-nor/intel-spi.c b/drivers/mtd/spi-nor/intel-spi.c index 986a3d020a3a..8a596bfeddff 100644 --- a/drivers/mtd/spi-nor/intel-spi.c +++ b/drivers/mtd/spi-nor/intel-spi.c @@ -715,6 +715,11 @@ static void intel_spi_fill_partition(struct intel_spi *ispi, struct intel_spi *intel_spi_probe(struct device *dev, struct resource *mem, const struct intel_spi_boardinfo *info) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; struct mtd_partition part; struct intel_spi *ispi; int ret; @@ -746,7 +751,7 @@ struct intel_spi *intel_spi_probe(struct device *dev, ispi->nor.write = intel_spi_write; ispi->nor.erase = intel_spi_erase; - ret = spi_nor_scan(&ispi->nor, NULL, SPI_NOR_NORMAL); + ret = spi_nor_scan(&ispi->nor, NULL, &hwcaps); if (ret) { dev_info(dev, "failed to locate the chip\n"); return ERR_PTR(ret); diff --git a/drivers/mtd/spi-nor/mtk-quadspi.c b/drivers/mtd/spi-nor/mtk-quadspi.c index b6377707ce32..8a20ec4991c8 100644 --- a/drivers/mtd/spi-nor/mtk-quadspi.c +++ b/drivers/mtd/spi-nor/mtk-quadspi.c @@ -123,20 +123,20 @@ static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor) { struct spi_nor *nor = &mt8173_nor->nor; - switch (nor->flash_read) { - case SPI_NOR_FAST: + switch (nor->read_proto) { + case SNOR_PROTO_1_1_1: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA3_REG); writeb(MTK_NOR_FAST_READ, mt8173_nor->base + MTK_NOR_CFG1_REG); break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA3_REG); writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base + MTK_NOR_DUAL_REG); break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: writeb(nor->read_opcode, mt8173_nor->base + MTK_NOR_PRGDATA4_REG); writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base + @@ -408,6 +408,11 @@ static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, static int mtk_nor_init(struct mt8173_nor *mt8173_nor, struct device_node *flash_node) { + const struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_READ_1_1_2 | + SNOR_HWCAPS_PP, + }; int ret; struct spi_nor *nor; @@ -426,7 +431,7 @@ static int mtk_nor_init(struct mt8173_nor *mt8173_nor, nor->write_reg = mt8173_nor_write_reg; nor->mtd.name = "mtk_nor"; /* initialized with NULL */ - ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL); + ret = spi_nor_scan(nor, NULL, &hwcaps); if (ret) return ret; diff --git a/drivers/mtd/spi-nor/nxp-spifi.c b/drivers/mtd/spi-nor/nxp-spifi.c index 73a14f40928b..15374216d4d9 100644 --- a/drivers/mtd/spi-nor/nxp-spifi.c +++ b/drivers/mtd/spi-nor/nxp-spifi.c @@ -240,13 +240,12 @@ static int nxp_spifi_erase(struct spi_nor *nor, loff_t offs) static int nxp_spifi_setup_memory_cmd(struct nxp_spifi *spifi) { - switch (spifi->nor.flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (spifi->nor.read_proto) { + case SNOR_PROTO_1_1_1: spifi->mcmd = SPIFI_CMD_FIELDFORM_ALL_SERIAL; break; - case SPI_NOR_DUAL: - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_2: + case SNOR_PROTO_1_1_4: spifi->mcmd = SPIFI_CMD_FIELDFORM_QUAD_DUAL_DATA; break; default: @@ -274,7 +273,11 @@ static void nxp_spifi_dummy_id_read(struct spi_nor *nor) static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, struct device_node *np) { - enum read_mode flash_read; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; u32 ctrl, property; u16 mode = 0; int ret; @@ -308,13 +311,12 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, if (mode & SPI_RX_DUAL) { ctrl |= SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_DUAL; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; } else if (mode & SPI_RX_QUAD) { ctrl &= ~SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_QUAD; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; } else { ctrl |= SPIFI_CTRL_DUAL; - flash_read = SPI_NOR_NORMAL; } switch (mode & (SPI_CPHA | SPI_CPOL)) { @@ -351,7 +353,7 @@ static int nxp_spifi_setup_flash(struct nxp_spifi *spifi, */ nxp_spifi_dummy_id_read(&spifi->nor); - ret = spi_nor_scan(&spifi->nor, NULL, flash_read); + ret = spi_nor_scan(&spifi->nor, NULL, &hwcaps); if (ret) { dev_err(spifi->dev, "device scan failed\n"); return ret; diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index dea8c9cbadf0..1413828ff1fb 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -150,24 +150,6 @@ static int read_cr(struct spi_nor *nor) } /* - * Dummy Cycle calculation for different type of read. - * It can be used to support more commands with - * different dummy cycle requirements. - */ -static inline int spi_nor_read_dummy_cycles(struct spi_nor *nor) -{ - switch (nor->flash_read) { - case SPI_NOR_FAST: - case SPI_NOR_DUAL: - case SPI_NOR_QUAD: - return 8; - case SPI_NOR_NORMAL: - return 0; - } - return 0; -} - -/* * Write status register 1 byte * Returns negative if error occurred. */ @@ -221,6 +203,10 @@ static inline u8 spi_nor_convert_3to4_read(u8 opcode) { SPINOR_OP_READ_1_2_2, SPINOR_OP_READ_1_2_2_4B }, { SPINOR_OP_READ_1_1_4, SPINOR_OP_READ_1_1_4_4B }, { SPINOR_OP_READ_1_4_4, SPINOR_OP_READ_1_4_4_4B }, + + { SPINOR_OP_READ_1_1_1_DTR, SPINOR_OP_READ_1_1_1_DTR_4B }, + { SPINOR_OP_READ_1_2_2_DTR, SPINOR_OP_READ_1_2_2_DTR_4B }, + { SPINOR_OP_READ_1_4_4_DTR, SPINOR_OP_READ_1_4_4_DTR_4B }, }; return spi_nor_convert_opcode(opcode, spi_nor_3to4_read, @@ -1022,10 +1008,12 @@ static const struct flash_info spi_nor_ids[] = { { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) }, { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) }, { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) }, - { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, + { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, - { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_QUAD_READ) }, + { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "mx66u51235f", INFO(0xc2253a, 0, 64 * 1024, 1024, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "mx66l1g45g", INFO(0xc2201b, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "mx66l1g55g", INFO(0xc2261b, 0, 64 * 1024, 2048, SPI_NOR_QUAD_READ) }, /* Micron */ @@ -1036,7 +1024,7 @@ static const struct flash_info spi_nor_ids[] = { { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, - { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, @@ -1076,6 +1064,7 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl164k", INFO(0x014017, 0, 64 * 1024, 128, SECT_4K) }, { "s25fl204k", INFO(0x014013, 0, 64 * 1024, 8, SECT_4K | SPI_NOR_DUAL_READ) }, { "s25fl208k", INFO(0x014014, 0, 64 * 1024, 16, SECT_4K | SPI_NOR_DUAL_READ) }, + { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, @@ -1159,7 +1148,9 @@ static const struct flash_info spi_nor_ids[] = { { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) }, { "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) }, - { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) }, + { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, + { "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024, + SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, /* Catalyst / On Semiconductor -- non-JEDEC */ { "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) }, @@ -1403,8 +1394,9 @@ static int macronix_quad_enable(struct spi_nor *nor) write_sr(nor, val | SR_QUAD_EN_MX); - if (spi_nor_wait_till_ready(nor)) - return 1; + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; ret = read_sr(nor); if (!(ret > 0 && (ret & SR_QUAD_EN_MX))) { @@ -1460,30 +1452,6 @@ static int spansion_quad_enable(struct spi_nor *nor) return 0; } -static int set_quad_mode(struct spi_nor *nor, const struct flash_info *info) -{ - int status; - - switch (JEDEC_MFR(info)) { - case SNOR_MFR_MACRONIX: - status = macronix_quad_enable(nor); - if (status) { - dev_err(nor->dev, "Macronix quad-read not enabled\n"); - return -EINVAL; - } - return status; - case SNOR_MFR_MICRON: - return 0; - default: - status = spansion_quad_enable(nor); - if (status) { - dev_err(nor->dev, "Spansion quad-read not enabled\n"); - return -EINVAL; - } - return status; - } -} - static int spi_nor_check(struct spi_nor *nor) { if (!nor->dev || !nor->read || !nor->write || @@ -1536,8 +1504,349 @@ static int s3an_nor_scan(const struct flash_info *info, struct spi_nor *nor) return 0; } -int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) +struct spi_nor_read_command { + u8 num_mode_clocks; + u8 num_wait_states; + u8 opcode; + enum spi_nor_protocol proto; +}; + +struct spi_nor_pp_command { + u8 opcode; + enum spi_nor_protocol proto; +}; + +enum spi_nor_read_command_index { + SNOR_CMD_READ, + SNOR_CMD_READ_FAST, + SNOR_CMD_READ_1_1_1_DTR, + + /* Dual SPI */ + SNOR_CMD_READ_1_1_2, + SNOR_CMD_READ_1_2_2, + SNOR_CMD_READ_2_2_2, + SNOR_CMD_READ_1_2_2_DTR, + + /* Quad SPI */ + SNOR_CMD_READ_1_1_4, + SNOR_CMD_READ_1_4_4, + SNOR_CMD_READ_4_4_4, + SNOR_CMD_READ_1_4_4_DTR, + + /* Octo SPI */ + SNOR_CMD_READ_1_1_8, + SNOR_CMD_READ_1_8_8, + SNOR_CMD_READ_8_8_8, + SNOR_CMD_READ_1_8_8_DTR, + + SNOR_CMD_READ_MAX +}; + +enum spi_nor_pp_command_index { + SNOR_CMD_PP, + + /* Quad SPI */ + SNOR_CMD_PP_1_1_4, + SNOR_CMD_PP_1_4_4, + SNOR_CMD_PP_4_4_4, + + /* Octo SPI */ + SNOR_CMD_PP_1_1_8, + SNOR_CMD_PP_1_8_8, + SNOR_CMD_PP_8_8_8, + + SNOR_CMD_PP_MAX +}; + +struct spi_nor_flash_parameter { + u64 size; + u32 page_size; + + struct spi_nor_hwcaps hwcaps; + struct spi_nor_read_command reads[SNOR_CMD_READ_MAX]; + struct spi_nor_pp_command page_programs[SNOR_CMD_PP_MAX]; + + int (*quad_enable)(struct spi_nor *nor); +}; + +static void +spi_nor_set_read_settings(struct spi_nor_read_command *read, + u8 num_mode_clocks, + u8 num_wait_states, + u8 opcode, + enum spi_nor_protocol proto) { + read->num_mode_clocks = num_mode_clocks; + read->num_wait_states = num_wait_states; + read->opcode = opcode; + read->proto = proto; +} + +static void +spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, + u8 opcode, + enum spi_nor_protocol proto) +{ + pp->opcode = opcode; + pp->proto = proto; +} + +static int spi_nor_init_params(struct spi_nor *nor, + const struct flash_info *info, + struct spi_nor_flash_parameter *params) +{ + /* Set legacy flash parameters as default. */ + memset(params, 0, sizeof(*params)); + + /* Set SPI NOR sizes. */ + params->size = info->sector_size * info->n_sectors; + params->page_size = info->page_size; + + /* (Fast) Read settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_READ; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ], + 0, 0, SPINOR_OP_READ, + SNOR_PROTO_1_1_1); + + if (!(info->flags & SPI_NOR_NO_FR)) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_FAST; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_FAST], + 0, 8, SPINOR_OP_READ_FAST, + SNOR_PROTO_1_1_1); + } + + if (info->flags & SPI_NOR_DUAL_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_2], + 0, 8, SPINOR_OP_READ_1_1_2, + SNOR_PROTO_1_1_2); + } + + if (info->flags & SPI_NOR_QUAD_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_1_1_4], + 0, 8, SPINOR_OP_READ_1_1_4, + SNOR_PROTO_1_1_4); + } + + /* Page Program settings. */ + params->hwcaps.mask |= SNOR_HWCAPS_PP; + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], + SPINOR_OP_PP, SNOR_PROTO_1_1_1); + + /* Select the procedure to set the Quad Enable bit. */ + if (params->hwcaps.mask & (SNOR_HWCAPS_READ_QUAD | + SNOR_HWCAPS_PP_QUAD)) { + switch (JEDEC_MFR(info)) { + case SNOR_MFR_MACRONIX: + params->quad_enable = macronix_quad_enable; + break; + + case SNOR_MFR_MICRON: + break; + + default: + params->quad_enable = spansion_quad_enable; + break; + } + } + + return 0; +} + +static int spi_nor_hwcaps2cmd(u32 hwcaps, const int table[][2], size_t size) +{ + size_t i; + + for (i = 0; i < size; i++) + if (table[i][0] == (int)hwcaps) + return table[i][1]; + + return -EINVAL; +} + +static int spi_nor_hwcaps_read2cmd(u32 hwcaps) +{ + static const int hwcaps_read2cmd[][2] = { + { SNOR_HWCAPS_READ, SNOR_CMD_READ }, + { SNOR_HWCAPS_READ_FAST, SNOR_CMD_READ_FAST }, + { SNOR_HWCAPS_READ_1_1_1_DTR, SNOR_CMD_READ_1_1_1_DTR }, + { SNOR_HWCAPS_READ_1_1_2, SNOR_CMD_READ_1_1_2 }, + { SNOR_HWCAPS_READ_1_2_2, SNOR_CMD_READ_1_2_2 }, + { SNOR_HWCAPS_READ_2_2_2, SNOR_CMD_READ_2_2_2 }, + { SNOR_HWCAPS_READ_1_2_2_DTR, SNOR_CMD_READ_1_2_2_DTR }, + { SNOR_HWCAPS_READ_1_1_4, SNOR_CMD_READ_1_1_4 }, + { SNOR_HWCAPS_READ_1_4_4, SNOR_CMD_READ_1_4_4 }, + { SNOR_HWCAPS_READ_4_4_4, SNOR_CMD_READ_4_4_4 }, + { SNOR_HWCAPS_READ_1_4_4_DTR, SNOR_CMD_READ_1_4_4_DTR }, + { SNOR_HWCAPS_READ_1_1_8, SNOR_CMD_READ_1_1_8 }, + { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 }, + { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 }, + { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd, + ARRAY_SIZE(hwcaps_read2cmd)); +} + +static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) +{ + static const int hwcaps_pp2cmd[][2] = { + { SNOR_HWCAPS_PP, SNOR_CMD_PP }, + { SNOR_HWCAPS_PP_1_1_4, SNOR_CMD_PP_1_1_4 }, + { SNOR_HWCAPS_PP_1_4_4, SNOR_CMD_PP_1_4_4 }, + { SNOR_HWCAPS_PP_4_4_4, SNOR_CMD_PP_4_4_4 }, + { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 }, + { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 }, + { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 }, + }; + + return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd, + ARRAY_SIZE(hwcaps_pp2cmd)); +} + +static int spi_nor_select_read(struct spi_nor *nor, + const struct spi_nor_flash_parameter *params, + u32 shared_hwcaps) +{ + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_READ_MASK) - 1; + const struct spi_nor_read_command *read; + + if (best_match < 0) + return -EINVAL; + + cmd = spi_nor_hwcaps_read2cmd(BIT(best_match)); + if (cmd < 0) + return -EINVAL; + + read = ¶ms->reads[cmd]; + nor->read_opcode = read->opcode; + nor->read_proto = read->proto; + + /* + * In the spi-nor framework, we don't need to make the difference + * between mode clock cycles and wait state clock cycles. + * Indeed, the value of the mode clock cycles is used by a QSPI + * flash memory to know whether it should enter or leave its 0-4-4 + * (Continuous Read / XIP) mode. + * eXecution In Place is out of the scope of the mtd sub-system. + * Hence we choose to merge both mode and wait state clock cycles + * into the so called dummy clock cycles. + */ + nor->read_dummy = read->num_mode_clocks + read->num_wait_states; + return 0; +} + +static int spi_nor_select_pp(struct spi_nor *nor, + const struct spi_nor_flash_parameter *params, + u32 shared_hwcaps) +{ + int cmd, best_match = fls(shared_hwcaps & SNOR_HWCAPS_PP_MASK) - 1; + const struct spi_nor_pp_command *pp; + + if (best_match < 0) + return -EINVAL; + + cmd = spi_nor_hwcaps_pp2cmd(BIT(best_match)); + if (cmd < 0) + return -EINVAL; + + pp = ¶ms->page_programs[cmd]; + nor->program_opcode = pp->opcode; + nor->write_proto = pp->proto; + return 0; +} + +static int spi_nor_select_erase(struct spi_nor *nor, + const struct flash_info *info) +{ + struct mtd_info *mtd = &nor->mtd; + +#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS + /* prefer "small sector" erase if possible */ + if (info->flags & SECT_4K) { + nor->erase_opcode = SPINOR_OP_BE_4K; + mtd->erasesize = 4096; + } else if (info->flags & SECT_4K_PMC) { + nor->erase_opcode = SPINOR_OP_BE_4K_PMC; + mtd->erasesize = 4096; + } else +#endif + { + nor->erase_opcode = SPINOR_OP_SE; + mtd->erasesize = info->sector_size; + } + return 0; +} + +static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info, + const struct spi_nor_flash_parameter *params, + const struct spi_nor_hwcaps *hwcaps) +{ + u32 ignored_mask, shared_mask; + bool enable_quad_io; + int err; + + /* + * Keep only the hardware capabilities supported by both the SPI + * controller and the SPI flash memory. + */ + shared_mask = hwcaps->mask & params->hwcaps.mask; + + /* SPI n-n-n protocols are not supported yet. */ + ignored_mask = (SNOR_HWCAPS_READ_2_2_2 | + SNOR_HWCAPS_READ_4_4_4 | + SNOR_HWCAPS_READ_8_8_8 | + SNOR_HWCAPS_PP_4_4_4 | + SNOR_HWCAPS_PP_8_8_8); + if (shared_mask & ignored_mask) { + dev_dbg(nor->dev, + "SPI n-n-n protocols are not supported yet.\n"); + shared_mask &= ~ignored_mask; + } + + /* Select the (Fast) Read command. */ + err = spi_nor_select_read(nor, params, shared_mask); + if (err) { + dev_err(nor->dev, + "can't select read settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Select the Page Program command. */ + err = spi_nor_select_pp(nor, params, shared_mask); + if (err) { + dev_err(nor->dev, + "can't select write settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Select the Sector Erase command. */ + err = spi_nor_select_erase(nor, info); + if (err) { + dev_err(nor->dev, + "can't select erase settings supported by both the SPI controller and memory.\n"); + return err; + } + + /* Enable Quad I/O if needed. */ + enable_quad_io = (spi_nor_get_protocol_width(nor->read_proto) == 4 || + spi_nor_get_protocol_width(nor->write_proto) == 4); + if (enable_quad_io && params->quad_enable) { + err = params->quad_enable(nor); + if (err) { + dev_err(nor->dev, "quad mode not supported\n"); + return err; + } + } + + return 0; +} + +int spi_nor_scan(struct spi_nor *nor, const char *name, + const struct spi_nor_hwcaps *hwcaps) +{ + struct spi_nor_flash_parameter params; const struct flash_info *info = NULL; struct device *dev = nor->dev; struct mtd_info *mtd = &nor->mtd; @@ -1549,6 +1858,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (ret) return ret; + /* Reset SPI protocol for all commands. */ + nor->reg_proto = SNOR_PROTO_1_1_1; + nor->read_proto = SNOR_PROTO_1_1_1; + nor->write_proto = SNOR_PROTO_1_1_1; + if (name) info = spi_nor_match_id(name); /* Try to auto-detect if chip name wasn't specified or not found */ @@ -1591,6 +1905,11 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (info->flags & SPI_S3AN) nor->flags |= SNOR_F_READY_XSR_RDY; + /* Parse the Serial Flash Discoverable Parameters table. */ + ret = spi_nor_init_params(nor, info, ¶ms); + if (ret) + return ret; + /* * Atmel, SST, Intel/Numonyx, and others serial NOR tend to power up * with the software protection bits set @@ -1611,7 +1930,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) mtd->type = MTD_NORFLASH; mtd->writesize = 1; mtd->flags = MTD_CAP_NORFLASH; - mtd->size = info->sector_size * info->n_sectors; + mtd->size = params.size; mtd->_erase = spi_nor_erase; mtd->_read = spi_nor_read; @@ -1642,75 +1961,38 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) if (info->flags & NO_CHIP_ERASE) nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; -#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS - /* prefer "small sector" erase if possible */ - if (info->flags & SECT_4K) { - nor->erase_opcode = SPINOR_OP_BE_4K; - mtd->erasesize = 4096; - } else if (info->flags & SECT_4K_PMC) { - nor->erase_opcode = SPINOR_OP_BE_4K_PMC; - mtd->erasesize = 4096; - } else -#endif - { - nor->erase_opcode = SPINOR_OP_SE; - mtd->erasesize = info->sector_size; - } - if (info->flags & SPI_NOR_NO_ERASE) mtd->flags |= MTD_NO_ERASE; mtd->dev.parent = dev; - nor->page_size = info->page_size; + nor->page_size = params.page_size; mtd->writebufsize = nor->page_size; if (np) { /* If we were instantiated by DT, use it */ if (of_property_read_bool(np, "m25p,fast-read")) - nor->flash_read = SPI_NOR_FAST; + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; else - nor->flash_read = SPI_NOR_NORMAL; + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; } else { /* If we weren't instantiated by DT, default to fast-read */ - nor->flash_read = SPI_NOR_FAST; + params.hwcaps.mask |= SNOR_HWCAPS_READ_FAST; } /* Some devices cannot do fast-read, no matter what DT tells us */ if (info->flags & SPI_NOR_NO_FR) - nor->flash_read = SPI_NOR_NORMAL; - - /* Quad/Dual-read mode takes precedence over fast/normal */ - if (mode == SPI_NOR_QUAD && info->flags & SPI_NOR_QUAD_READ) { - ret = set_quad_mode(nor, info); - if (ret) { - dev_err(dev, "quad mode not supported\n"); - return ret; - } - nor->flash_read = SPI_NOR_QUAD; - } else if (mode == SPI_NOR_DUAL && info->flags & SPI_NOR_DUAL_READ) { - nor->flash_read = SPI_NOR_DUAL; - } - - /* Default commands */ - switch (nor->flash_read) { - case SPI_NOR_QUAD: - nor->read_opcode = SPINOR_OP_READ_1_1_4; - break; - case SPI_NOR_DUAL: - nor->read_opcode = SPINOR_OP_READ_1_1_2; - break; - case SPI_NOR_FAST: - nor->read_opcode = SPINOR_OP_READ_FAST; - break; - case SPI_NOR_NORMAL: - nor->read_opcode = SPINOR_OP_READ; - break; - default: - dev_err(dev, "No Read opcode defined\n"); - return -EINVAL; - } + params.hwcaps.mask &= ~SNOR_HWCAPS_READ_FAST; - nor->program_opcode = SPINOR_OP_PP; + /* + * Configure the SPI memory: + * - select op codes for (Fast) Read, Page Program and Sector Erase. + * - set the number of dummy cycles (mode cycles + wait states). + * - set the SPI protocols for register and memory accesses. + * - set the Quad Enable bit if needed (required by SPI x-y-4 protos). + */ + ret = spi_nor_setup(nor, info, ¶ms, hwcaps); + if (ret) + return ret; if (info->addr_width) nor->addr_width = info->addr_width; @@ -1732,8 +2014,6 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode) return -EINVAL; } - nor->read_dummy = spi_nor_read_dummy_cycles(nor); - if (info->flags & SPI_S3AN) { ret = s3an_nor_scan(info, nor); if (ret) diff --git a/drivers/mtd/spi-nor/stm32-quadspi.c b/drivers/mtd/spi-nor/stm32-quadspi.c index ae45f81b8cd3..86c0931543c5 100644 --- a/drivers/mtd/spi-nor/stm32-quadspi.c +++ b/drivers/mtd/spi-nor/stm32-quadspi.c @@ -19,6 +19,7 @@ #include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/reset.h> +#include <linux/sizes.h> #define QUADSPI_CR 0x00 #define CR_EN BIT(0) @@ -192,15 +193,15 @@ static void stm32_qspi_set_framemode(struct spi_nor *nor, cmd->framemode = CCR_IMODE_1; if (read) { - switch (nor->flash_read) { - case SPI_NOR_NORMAL: - case SPI_NOR_FAST: + switch (nor->read_proto) { + default: + case SNOR_PROTO_1_1_1: dmode = CCR_DMODE_1; break; - case SPI_NOR_DUAL: + case SNOR_PROTO_1_1_2: dmode = CCR_DMODE_2; break; - case SPI_NOR_QUAD: + case SNOR_PROTO_1_1_4: dmode = CCR_DMODE_4; break; } @@ -375,7 +376,7 @@ static ssize_t stm32_qspi_read(struct spi_nor *nor, loff_t from, size_t len, struct stm32_qspi_cmd cmd; int err; - dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#x\n", + dev_dbg(qspi->dev, "read(%#.2x): buf:%p from:%#.8x len:%#zx\n", nor->read_opcode, buf, (u32)from, len); memset(&cmd, 0, sizeof(cmd)); @@ -402,7 +403,7 @@ static ssize_t stm32_qspi_write(struct spi_nor *nor, loff_t to, size_t len, struct stm32_qspi_cmd cmd; int err; - dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#x\n", + dev_dbg(dev, "write(%#.2x): buf:%p to:%#.8x len:%#zx\n", nor->program_opcode, buf, (u32)to, len); memset(&cmd, 0, sizeof(cmd)); @@ -480,7 +481,12 @@ static void stm32_qspi_unprep(struct spi_nor *nor, enum spi_nor_ops ops) static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, struct device_node *np) { - u32 width, flash_read, presc, cs_num, max_rate = 0; + struct spi_nor_hwcaps hwcaps = { + .mask = SNOR_HWCAPS_READ | + SNOR_HWCAPS_READ_FAST | + SNOR_HWCAPS_PP, + }; + u32 width, presc, cs_num, max_rate = 0; struct stm32_qspi_flash *flash; struct mtd_info *mtd; int ret; @@ -499,12 +505,10 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, width = 1; if (width == 4) - flash_read = SPI_NOR_QUAD; + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4; else if (width == 2) - flash_read = SPI_NOR_DUAL; - else if (width == 1) - flash_read = SPI_NOR_NORMAL; - else + hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2; + else if (width != 1) return -EINVAL; flash = &qspi->flash[cs_num]; @@ -539,7 +543,7 @@ static int stm32_qspi_flash_setup(struct stm32_qspi *qspi, */ flash->fsize = FSIZE_VAL(SZ_1K); - ret = spi_nor_scan(&flash->nor, NULL, flash_read); + ret = spi_nor_scan(&flash->nor, NULL, &hwcaps); if (ret) { dev_err(qspi->dev, "device scan failed\n"); return ret; |