summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/clocksource/Kconfig24
-rw-r--r--drivers/clocksource/Makefile1
-rw-r--r--drivers/clocksource/arm_arch_timer.c55
-rw-r--r--drivers/clocksource/arm_global_timer.c3
-rw-r--r--drivers/clocksource/bcm2835_timer.c4
-rw-r--r--drivers/clocksource/clksrc-dbx500-prcmu.c5
-rw-r--r--drivers/clocksource/clksrc-of.c1
-rw-r--r--drivers/clocksource/dw_apb_timer_of.c16
-rw-r--r--drivers/clocksource/em_sti.c4
-rw-r--r--drivers/clocksource/mxs_timer.c4
-rw-r--r--drivers/clocksource/nomadik-mtu.c4
-rw-r--r--drivers/clocksource/samsung_pwm_timer.c4
-rw-r--r--drivers/clocksource/sun4i_timer.c12
-rw-r--r--drivers/clocksource/tcb_clksrc.c61
-rw-r--r--drivers/clocksource/tegra20_timer.c8
-rw-r--r--drivers/clocksource/time-armada-370-xp.c4
-rw-r--r--drivers/clocksource/time-efm32.c275
-rw-r--r--drivers/clocksource/timer-prima2.c6
-rw-r--r--drivers/clocksource/vf_pit_timer.c4
-rw-r--r--drivers/clocksource/vt8500_timer.c2
-rw-r--r--drivers/rtc/interface.c13
-rw-r--r--drivers/rtc/rtc-pl031.c3
22 files changed, 452 insertions, 61 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 971d796e071d..bdb953e15d2a 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -34,6 +34,7 @@ config ORION_TIMER
bool
config SUN4I_TIMER
+ select CLKSRC_MMIO
bool
config VT8500_TIMER
@@ -71,10 +72,33 @@ config CLKSRC_DBX500_PRCMU_SCHED_CLOCK
help
Use the always on PRCMU Timer as sched_clock
+config CLKSRC_EFM32
+ bool "Clocksource for Energy Micro's EFM32 SoCs" if !ARCH_EFM32
+ depends on OF && ARM && (ARCH_EFM32 || COMPILE_TEST)
+ default ARCH_EFM32
+ help
+ Support to use the timers of EFM32 SoCs as clock source and clock
+ event device.
+
config ARM_ARCH_TIMER
bool
select CLKSRC_OF if OF
+config ARM_ARCH_TIMER_EVTSTREAM
+ bool "Support for ARM architected timer event stream generation"
+ default y if ARM_ARCH_TIMER
+ help
+ This option enables support for event stream generation based on
+ the ARM architected timer. It is used for waking up CPUs executing
+ the wfe instruction at a frequency represented as a power-of-2
+ divisor of the clock rate.
+ The main use of the event stream is wfe-based timeouts of userspace
+ locking implementations. It might also be useful for imposing timeout
+ on wfe to safeguard against any programming errors in case an expected
+ event is not generated.
+ This must be disabled for hardware validation purposes to detect any
+ hardware anomalies of missing events.
+
config ARM_GLOBAL_TIMER
bool
select CLKSRC_OF if OF
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 704d6d342adc..33621efb9148 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o
obj-$(CONFIG_ARCH_NSPIRE) += zevio-timer.o
obj-$(CONFIG_ARCH_BCM) += bcm_kona_timer.o
obj-$(CONFIG_CADENCE_TTC_TIMER) += cadence_ttc_timer.o
+obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index fbd9ccd5e114..95fb944e15ee 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -13,12 +13,14 @@
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/sched_clock.h>
#include <asm/arch_timer.h>
#include <asm/virt.h>
@@ -294,6 +296,19 @@ static void __arch_timer_setup(unsigned type,
clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
}
+static void arch_timer_configure_evtstream(void)
+{
+ int evt_stream_div, pos;
+
+ /* Find the closest power of two to the divisor */
+ evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ;
+ pos = fls(evt_stream_div);
+ if (pos > 1 && !(evt_stream_div & (1 << (pos - 2))))
+ pos--;
+ /* enable event stream */
+ arch_timer_evtstrm_enable(min(pos, 15));
+}
+
static int arch_timer_setup(struct clock_event_device *clk)
{
__arch_timer_setup(ARCH_CP15_TIMER, clk);
@@ -307,6 +322,8 @@ static int arch_timer_setup(struct clock_event_device *clk)
}
arch_counter_set_user_access();
+ if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM))
+ arch_timer_configure_evtstream();
return 0;
}
@@ -389,7 +406,7 @@ static struct clocksource clocksource_counter = {
.rating = 400,
.read = arch_counter_read,
.mask = CLOCKSOURCE_MASK(56),
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP,
};
static struct cyclecounter cyclecounter = {
@@ -419,6 +436,9 @@ static void __init arch_counter_register(unsigned type)
cyclecounter.mult = clocksource_counter.mult;
cyclecounter.shift = clocksource_counter.shift;
timecounter_init(&timecounter, &cyclecounter, start_count);
+
+ /* 56 bits minimum, so we assume worst case rollover */
+ sched_clock_register(arch_timer_read_counter, 56, arch_timer_rate);
}
static void arch_timer_stop(struct clock_event_device *clk)
@@ -460,6 +480,33 @@ static struct notifier_block arch_timer_cpu_nb = {
.notifier_call = arch_timer_cpu_notify,
};
+#ifdef CONFIG_CPU_PM
+static unsigned int saved_cntkctl;
+static int arch_timer_cpu_pm_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ if (action == CPU_PM_ENTER)
+ saved_cntkctl = arch_timer_get_cntkctl();
+ else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT)
+ arch_timer_set_cntkctl(saved_cntkctl);
+ return NOTIFY_OK;
+}
+
+static struct notifier_block arch_timer_cpu_pm_notifier = {
+ .notifier_call = arch_timer_cpu_pm_notify,
+};
+
+static int __init arch_timer_cpu_pm_init(void)
+{
+ return cpu_pm_register_notifier(&arch_timer_cpu_pm_notifier);
+}
+#else
+static int __init arch_timer_cpu_pm_init(void)
+{
+ return 0;
+}
+#endif
+
static int __init arch_timer_register(void)
{
int err;
@@ -499,11 +546,17 @@ static int __init arch_timer_register(void)
if (err)
goto out_free_irq;
+ err = arch_timer_cpu_pm_init();
+ if (err)
+ goto out_unreg_notify;
+
/* Immediately configure the timer on the boot CPU */
arch_timer_setup(this_cpu_ptr(arch_timer_evt));
return 0;
+out_unreg_notify:
+ unregister_cpu_notifier(&arch_timer_cpu_nb);
out_free_irq:
if (arch_timer_use_virtual)
free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt);
diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c
index b66c1f36066c..c639b1a9e996 100644
--- a/drivers/clocksource/arm_global_timer.c
+++ b/drivers/clocksource/arm_global_timer.c
@@ -169,7 +169,8 @@ static int gt_clockevents_init(struct clock_event_device *clk)
int cpu = smp_processor_id();
clk->name = "arm_global_timer";
- clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERCPU;
clk->set_mode = gt_clockevent_set_mode;
clk->set_next_event = gt_clockevent_set_next_event;
clk->cpumask = cpumask_of(cpu);
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index 07ea7ce900dc..26ed331b1aad 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -49,7 +49,7 @@ struct bcm2835_timer {
static void __iomem *system_clock __read_mostly;
-static u32 notrace bcm2835_sched_read(void)
+static u64 notrace bcm2835_sched_read(void)
{
return readl_relaxed(system_clock);
}
@@ -110,7 +110,7 @@ static void __init bcm2835_timer_init(struct device_node *node)
panic("Can't read clock-frequency");
system_clock = base + REG_COUNTER_LO;
- setup_sched_clock(bcm2835_sched_read, 32, freq);
+ sched_clock_register(bcm2835_sched_read, 32, freq);
clocksource_mmio_init(base + REG_COUNTER_LO, node->name,
freq, 300, 32, clocksource_mmio_readl_up);
diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c
index a9fd4ad25674..b375106844d8 100644
--- a/drivers/clocksource/clksrc-dbx500-prcmu.c
+++ b/drivers/clocksource/clksrc-dbx500-prcmu.c
@@ -53,7 +53,7 @@ static struct clocksource clocksource_dbx500_prcmu = {
#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
-static u32 notrace dbx500_prcmu_sched_clock_read(void)
+static u64 notrace dbx500_prcmu_sched_clock_read(void)
{
if (unlikely(!clksrc_dbx500_timer_base))
return 0;
@@ -81,8 +81,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base)
clksrc_dbx500_timer_base + PRCMU_TIMER_REF);
}
#ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK
- setup_sched_clock(dbx500_prcmu_sched_clock_read,
- 32, RATE_32K);
+ sched_clock_register(dbx500_prcmu_sched_clock_read, 32, RATE_32K);
#endif
clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K);
}
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
index b9ddd9e3a2f5..35639cf4e5a2 100644
--- a/drivers/clocksource/clksrc-of.c
+++ b/drivers/clocksource/clksrc-of.c
@@ -35,5 +35,6 @@ void __init clocksource_of_init(void)
init_func = match->data;
init_func(np);
+ of_node_put(np);
}
}
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 4cbae4f762b1..45ba8aecc729 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -23,7 +23,7 @@
#include <linux/clk.h>
#include <linux/sched_clock.h>
-static void timer_get_base_and_rate(struct device_node *np,
+static void __init timer_get_base_and_rate(struct device_node *np,
void __iomem **base, u32 *rate)
{
struct clk *timer_clk;
@@ -55,11 +55,11 @@ static void timer_get_base_and_rate(struct device_node *np,
try_clock_freq:
if (of_property_read_u32(np, "clock-freq", rate) &&
- of_property_read_u32(np, "clock-frequency", rate))
+ of_property_read_u32(np, "clock-frequency", rate))
panic("No clock nor clock-frequency property for %s", np->name);
}
-static void add_clockevent(struct device_node *event_timer)
+static void __init add_clockevent(struct device_node *event_timer)
{
void __iomem *iobase;
struct dw_apb_clock_event_device *ced;
@@ -82,7 +82,7 @@ static void add_clockevent(struct device_node *event_timer)
static void __iomem *sched_io_base;
static u32 sched_rate;
-static void add_clocksource(struct device_node *source_timer)
+static void __init add_clocksource(struct device_node *source_timer)
{
void __iomem *iobase;
struct dw_apb_clocksource *cs;
@@ -106,7 +106,7 @@ static void add_clocksource(struct device_node *source_timer)
sched_rate = rate;
}
-static u32 read_sched_clock(void)
+static u64 read_sched_clock(void)
{
return __raw_readl(sched_io_base);
}
@@ -117,7 +117,7 @@ static const struct of_device_id sptimer_ids[] __initconst = {
{ /* Sentinel */ },
};
-static void init_sched_clock(void)
+static void __init init_sched_clock(void)
{
struct device_node *sched_timer;
@@ -128,7 +128,7 @@ static void init_sched_clock(void)
of_node_put(sched_timer);
}
- setup_sched_clock(read_sched_clock, 32, sched_rate);
+ sched_clock_register(read_sched_clock, 32, sched_rate);
}
static int num_called;
@@ -138,12 +138,10 @@ static void __init dw_apb_timer_init(struct device_node *timer)
case 0:
pr_debug("%s: found clockevent timer\n", __func__);
add_clockevent(timer);
- of_node_put(timer);
break;
case 1:
pr_debug("%s: found clocksource timer\n", __func__);
add_clocksource(timer);
- of_node_put(timer);
init_sched_clock();
break;
default:
diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c
index 3a5909c12d42..9d170834fcf3 100644
--- a/drivers/clocksource/em_sti.c
+++ b/drivers/clocksource/em_sti.c
@@ -78,7 +78,7 @@ static int em_sti_enable(struct em_sti_priv *p)
int ret;
/* enable clock */
- ret = clk_enable(p->clk);
+ ret = clk_prepare_enable(p->clk);
if (ret) {
dev_err(&p->pdev->dev, "cannot enable clock\n");
return ret;
@@ -107,7 +107,7 @@ static void em_sti_disable(struct em_sti_priv *p)
em_sti_write(p, STI_INTENCLR, 3);
/* stop clock */
- clk_disable(p->clk);
+ clk_disable_unprepare(p->clk);
}
static cycle_t em_sti_count(struct em_sti_priv *p)
diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c
index 0f5e65f74dc3..445b68a01dc5 100644
--- a/drivers/clocksource/mxs_timer.c
+++ b/drivers/clocksource/mxs_timer.c
@@ -222,7 +222,7 @@ static struct clocksource clocksource_mxs = {
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
-static u32 notrace mxs_read_sched_clock_v2(void)
+static u64 notrace mxs_read_sched_clock_v2(void)
{
return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1));
}
@@ -236,7 +236,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk)
else {
clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1),
"mxs_timer", c, 200, 32, clocksource_mmio_readl_down);
- setup_sched_clock(mxs_read_sched_clock_v2, 32, c);
+ sched_clock_register(mxs_read_sched_clock_v2, 32, c);
}
return 0;
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 1b74bea12385..ed7b73b508e0 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -76,7 +76,7 @@ static struct delay_timer mtu_delay_timer;
* local implementation which uses the clocksource to get some
* better resolution when scheduling the kernel.
*/
-static u32 notrace nomadik_read_sched_clock(void)
+static u64 notrace nomadik_read_sched_clock(void)
{
if (unlikely(!mtu_base))
return 0;
@@ -231,7 +231,7 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq,
"mtu_0");
#ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK
- setup_sched_clock(nomadik_read_sched_clock, 32, rate);
+ sched_clock_register(nomadik_read_sched_clock, 32, rate);
#endif
/* Timer 1 is used for events, register irq and clockevents */
diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c
index ab29476ee5f9..85082e8d3052 100644
--- a/drivers/clocksource/samsung_pwm_timer.c
+++ b/drivers/clocksource/samsung_pwm_timer.c
@@ -331,7 +331,7 @@ static struct clocksource samsung_clocksource = {
* this wraps around for now, since it is just a relative time
* stamp. (Inspired by U300 implementation.)
*/
-static u32 notrace samsung_read_sched_clock(void)
+static u64 notrace samsung_read_sched_clock(void)
{
return samsung_clocksource_read(NULL);
}
@@ -357,7 +357,7 @@ static void __init samsung_clocksource_init(void)
else
pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14;
- setup_sched_clock(samsung_read_sched_clock,
+ sched_clock_register(samsung_read_sched_clock,
pwm.variant.bits, clock_rate);
samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits);
diff --git a/drivers/clocksource/sun4i_timer.c b/drivers/clocksource/sun4i_timer.c
index 8ead0258740a..2fb4695a28d8 100644
--- a/drivers/clocksource/sun4i_timer.c
+++ b/drivers/clocksource/sun4i_timer.c
@@ -37,6 +37,8 @@
#define TIMER_INTVAL_REG(val) (0x10 * (val) + 0x14)
#define TIMER_CNTVAL_REG(val) (0x10 * (val) + 0x18)
+#define TIMER_SYNC_TICKS 3
+
static void __iomem *timer_base;
static u32 ticks_per_jiffy;
@@ -50,7 +52,7 @@ static void sun4i_clkevt_sync(void)
{
u32 old = readl(timer_base + TIMER_CNTVAL_REG(1));
- while ((old - readl(timer_base + TIMER_CNTVAL_REG(1))) < 3)
+ while ((old - readl(timer_base + TIMER_CNTVAL_REG(1))) < TIMER_SYNC_TICKS)
cpu_relax();
}
@@ -104,7 +106,7 @@ static int sun4i_clkevt_next_event(unsigned long evt,
struct clock_event_device *unused)
{
sun4i_clkevt_time_stop(0);
- sun4i_clkevt_time_setup(0, evt);
+ sun4i_clkevt_time_setup(0, evt - TIMER_SYNC_TICKS);
sun4i_clkevt_time_start(0, false);
return 0;
@@ -131,7 +133,7 @@ static irqreturn_t sun4i_timer_interrupt(int irq, void *dev_id)
static struct irqaction sun4i_timer_irq = {
.name = "sun4i_timer0",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = sun4i_timer_interrupt,
.dev_id = &sun4i_clockevent,
};
@@ -187,8 +189,8 @@ static void __init sun4i_timer_init(struct device_node *node)
sun4i_clockevent.cpumask = cpumask_of(0);
- clockevents_config_and_register(&sun4i_clockevent, rate, 0x1,
- 0xffffffff);
+ clockevents_config_and_register(&sun4i_clockevent, rate,
+ TIMER_SYNC_TICKS, 0xffffffff);
}
CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-timer",
sun4i_timer_init);
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 8a6187225dd0..00fdd1170284 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -100,7 +100,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
|| tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) {
__raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR));
__raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR));
- clk_disable(tcd->clk);
+ clk_disable_unprepare(tcd->clk);
}
switch (m) {
@@ -109,7 +109,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
* of oneshot, we get lower overhead and improved accuracy.
*/
case CLOCK_EVT_MODE_PERIODIC:
- clk_enable(tcd->clk);
+ clk_prepare_enable(tcd->clk);
/* slow clock, count up to RC, then irq and restart */
__raw_writel(timer_clock
@@ -126,7 +126,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d)
break;
case CLOCK_EVT_MODE_ONESHOT:
- clk_enable(tcd->clk);
+ clk_prepare_enable(tcd->clk);
/* slow clock, count up to RC, then irq and stop */
__raw_writel(timer_clock | ATMEL_TC_CPCSTOP
@@ -180,15 +180,22 @@ static irqreturn_t ch2_irq(int irq, void *handle)
static struct irqaction tc_irqaction = {
.name = "tc_clkevt",
- .flags = IRQF_TIMER | IRQF_DISABLED,
+ .flags = IRQF_TIMER,
.handler = ch2_irq,
};
-static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
{
+ int ret;
struct clk *t2_clk = tc->clk[2];
int irq = tc->irq[2];
+ /* try to enable t2 clk to avoid future errors in mode change */
+ ret = clk_prepare_enable(t2_clk);
+ if (ret)
+ return ret;
+ clk_disable_unprepare(t2_clk);
+
clkevt.regs = tc->regs;
clkevt.clk = t2_clk;
tc_irqaction.dev_id = &clkevt;
@@ -197,16 +204,21 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
clkevt.clkevt.cpumask = cpumask_of(0);
+ ret = setup_irq(irq, &tc_irqaction);
+ if (ret)
+ return ret;
+
clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
- setup_irq(irq, &tc_irqaction);
+ return ret;
}
#else /* !CONFIG_GENERIC_CLOCKEVENTS */
-static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
+static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
{
/* NOTHING */
+ return 0;
}
#endif
@@ -265,6 +277,7 @@ static int __init tcb_clksrc_init(void)
int best_divisor_idx = -1;
int clk32k_divisor_idx = -1;
int i;
+ int ret;
tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name);
if (!tc) {
@@ -275,7 +288,11 @@ static int __init tcb_clksrc_init(void)
pdev = tc->pdev;
t0_clk = tc->clk[0];
- clk_enable(t0_clk);
+ ret = clk_prepare_enable(t0_clk);
+ if (ret) {
+ pr_debug("can't enable T0 clk\n");
+ goto err_free_tc;
+ }
/* How fast will we be counting? Pick something over 5 MHz. */
rate = (u32) clk_get_rate(t0_clk);
@@ -313,17 +330,39 @@ static int __init tcb_clksrc_init(void)
/* tclib will give us three clocks no matter what the
* underlying platform supports.
*/
- clk_enable(tc->clk[1]);
+ ret = clk_prepare_enable(tc->clk[1]);
+ if (ret) {
+ pr_debug("can't enable T1 clk\n");
+ goto err_disable_t0;
+ }
/* setup both channel 0 & 1 */
tcb_setup_dual_chan(tc, best_divisor_idx);
}
/* and away we go! */
- clocksource_register_hz(&clksrc, divided_rate);
+ ret = clocksource_register_hz(&clksrc, divided_rate);
+ if (ret)
+ goto err_disable_t1;
/* channel 2: periodic and oneshot timer support */
- setup_clkevents(tc, clk32k_divisor_idx);
+ ret = setup_clkevents(tc, clk32k_divisor_idx);
+ if (ret)
+ goto err_unregister_clksrc;
return 0;
+
+err_unregister_clksrc:
+ clocksource_unregister(&clksrc);
+
+err_disable_t1:
+ if (!tc->tcb_config || tc->tcb_config->counter_width != 32)
+ clk_disable_unprepare(tc->clk[1]);
+
+err_disable_t0:
+ clk_disable_unprepare(t0_clk);
+
+err_free_tc:
+ atmel_tc_free(tc);
+ return ret;
}
arch_initcall(tcb_clksrc_init);
diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c
index 93961703b887..642849256d82 100644
--- a/drivers/clocksource/tegra20_timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -98,7 +98,7 @@ static struct clock_event_device tegra_clockevent = {
.set_mode = tegra_timer_set_mode,
};
-static u32 notrace tegra_read_sched_clock(void)
+static u64 notrace tegra_read_sched_clock(void)
{
return timer_readl(TIMERUS_CNTR_1US);
}
@@ -181,8 +181,6 @@ static void __init tegra20_init_timer(struct device_node *np)
rate = clk_get_rate(clk);
}
- of_node_put(np);
-
switch (rate) {
case 12000000:
timer_writel(0x000b, TIMERUS_USEC_CFG);
@@ -200,7 +198,7 @@ static void __init tegra20_init_timer(struct device_node *np)
WARN(1, "Unknown clock rate");
}
- setup_sched_clock(tegra_read_sched_clock, 32, 1000000);
+ sched_clock_register(tegra_read_sched_clock, 32, 1000000);
if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US,
"timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) {
@@ -241,8 +239,6 @@ static void __init tegra20_init_rtc(struct device_node *np)
else
clk_prepare_enable(clk);
- of_node_put(np);
-
register_persistent_clock(NULL, tegra_read_persistent_clock);
}
CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc);
diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 0198504ef6b0..d8e47e502785 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -96,7 +96,7 @@ static void local_timer_ctrl_clrset(u32 clr, u32 set)
local_base + TIMER_CTRL_OFF);
}
-static u32 notrace armada_370_xp_read_sched_clock(void)
+static u64 notrace armada_370_xp_read_sched_clock(void)
{
return ~readl(timer_base + TIMER0_VAL_OFF);
}
@@ -258,7 +258,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np)
/*
* Set scale and timer for sched_clock.
*/
- setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk);
+ sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk);
/*
* Setup free-running clocksource timer (interrupts
diff --git a/drivers/clocksource/time-efm32.c b/drivers/clocksource/time-efm32.c
new file mode 100644
index 000000000000..1a6205b7bed3
--- /dev/null
+++ b/drivers/clocksource/time-efm32.c
@@ -0,0 +1,275 @@
+/*
+ * Copyright (C) 2013 Pengutronix
+ * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/clk.h>
+
+#define TIMERn_CTRL 0x00
+#define TIMERn_CTRL_PRESC(val) (((val) & 0xf) << 24)
+#define TIMERn_CTRL_PRESC_1024 TIMERn_CTRL_PRESC(10)
+#define TIMERn_CTRL_CLKSEL(val) (((val) & 0x3) << 16)
+#define TIMERn_CTRL_CLKSEL_PRESCHFPERCLK TIMERn_CTRL_CLKSEL(0)
+#define TIMERn_CTRL_OSMEN 0x00000010
+#define TIMERn_CTRL_MODE(val) (((val) & 0x3) << 0)
+#define TIMERn_CTRL_MODE_UP TIMERn_CTRL_MODE(0)
+#define TIMERn_CTRL_MODE_DOWN TIMERn_CTRL_MODE(1)
+
+#define TIMERn_CMD 0x04
+#define TIMERn_CMD_START 0x00000001
+#define TIMERn_CMD_STOP 0x00000002
+
+#define TIMERn_IEN 0x0c
+#define TIMERn_IF 0x10
+#define TIMERn_IFS 0x14
+#define TIMERn_IFC 0x18
+#define TIMERn_IRQ_UF 0x00000002
+
+#define TIMERn_TOP 0x1c
+#define TIMERn_CNT 0x24
+
+struct efm32_clock_event_ddata {
+ struct clock_event_device evtdev;
+ void __iomem *base;
+ unsigned periodic_top;
+};
+
+static void efm32_clock_event_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evtdev)
+{
+ struct efm32_clock_event_ddata *ddata =
+ container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(ddata->periodic_top, ddata->base + TIMERn_TOP);
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_MODE_DOWN,
+ ddata->base + TIMERn_CTRL);
+ writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+ break;
+
+ case CLOCK_EVT_MODE_ONESHOT:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_OSMEN |
+ TIMERn_CTRL_MODE_DOWN,
+ ddata->base + TIMERn_CTRL);
+ break;
+
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ break;
+
+ case CLOCK_EVT_MODE_RESUME:
+ break;
+ }
+}
+
+static int efm32_clock_event_set_next_event(unsigned long evt,
+ struct clock_event_device *evtdev)
+{
+ struct efm32_clock_event_ddata *ddata =
+ container_of(evtdev, struct efm32_clock_event_ddata, evtdev);
+
+ writel_relaxed(TIMERn_CMD_STOP, ddata->base + TIMERn_CMD);
+ writel_relaxed(evt, ddata->base + TIMERn_CNT);
+ writel_relaxed(TIMERn_CMD_START, ddata->base + TIMERn_CMD);
+
+ return 0;
+}
+
+static irqreturn_t efm32_clock_event_handler(int irq, void *dev_id)
+{
+ struct efm32_clock_event_ddata *ddata = dev_id;
+
+ writel_relaxed(TIMERn_IRQ_UF, ddata->base + TIMERn_IFC);
+
+ ddata->evtdev.event_handler(&ddata->evtdev);
+
+ return IRQ_HANDLED;
+}
+
+static struct efm32_clock_event_ddata clock_event_ddata = {
+ .evtdev = {
+ .name = "efm32 clockevent",
+ .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_MODE_PERIODIC,
+ .set_mode = efm32_clock_event_set_mode,
+ .set_next_event = efm32_clock_event_set_next_event,
+ .rating = 200,
+ },
+};
+
+static struct irqaction efm32_clock_event_irq = {
+ .name = "efm32 clockevent",
+ .flags = IRQF_TIMER,
+ .handler = efm32_clock_event_handler,
+ .dev_id = &clock_event_ddata,
+};
+
+static int __init efm32_clocksource_init(struct device_node *np)
+{
+ struct clk *clk;
+ void __iomem *base;
+ unsigned long rate;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clocksource (%d)\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable timer clock for clocksource (%d)\n",
+ ret);
+ goto err_clk_enable;
+ }
+ rate = clk_get_rate(clk);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map registers for clocksource\n");
+ goto err_iomap;
+ }
+
+ writel_relaxed(TIMERn_CTRL_PRESC_1024 |
+ TIMERn_CTRL_CLKSEL_PRESCHFPERCLK |
+ TIMERn_CTRL_MODE_UP, base + TIMERn_CTRL);
+ writel_relaxed(TIMERn_CMD_START, base + TIMERn_CMD);
+
+ ret = clocksource_mmio_init(base + TIMERn_CNT, "efm32 timer",
+ DIV_ROUND_CLOSEST(rate, 1024), 200, 16,
+ clocksource_mmio_readl_up);
+ if (ret) {
+ pr_err("failed to init clocksource (%d)\n", ret);
+ goto err_clocksource_init;
+ }
+
+ return 0;
+
+err_clocksource_init:
+
+ iounmap(base);
+err_iomap:
+
+ clk_disable_unprepare(clk);
+err_clk_enable:
+
+ clk_put(clk);
+err_clk_get:
+
+ return ret;
+}
+
+static int __init efm32_clockevent_init(struct device_node *np)
+{
+ struct clk *clk;
+ void __iomem *base;
+ unsigned long rate;
+ int irq;
+ int ret;
+
+ clk = of_clk_get(np, 0);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ pr_err("failed to get clock for clockevent (%d)\n", ret);
+ goto err_clk_get;
+ }
+
+ ret = clk_prepare_enable(clk);
+ if (ret) {
+ pr_err("failed to enable timer clock for clockevent (%d)\n",
+ ret);
+ goto err_clk_enable;
+ }
+ rate = clk_get_rate(clk);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -EADDRNOTAVAIL;
+ pr_err("failed to map registers for clockevent\n");
+ goto err_iomap;
+ }
+
+ irq = irq_of_parse_and_map(np, 0);
+ if (!irq) {
+ ret = -ENOENT;
+ pr_err("failed to get irq for clockevent\n");
+ goto err_get_irq;
+ }
+
+ writel_relaxed(TIMERn_IRQ_UF, base + TIMERn_IEN);
+
+ clock_event_ddata.base = base;
+ clock_event_ddata.periodic_top = DIV_ROUND_CLOSEST(rate, 1024 * HZ);
+
+ setup_irq(irq, &efm32_clock_event_irq);
+
+ clockevents_config_and_register(&clock_event_ddata.evtdev,
+ DIV_ROUND_CLOSEST(rate, 1024),
+ 0xf, 0xffff);
+
+ return 0;
+
+err_get_irq:
+
+ iounmap(base);
+err_iomap:
+
+ clk_disable_unprepare(clk);
+err_clk_enable:
+
+ clk_put(clk);
+err_clk_get:
+
+ return ret;
+}
+
+/*
+ * This function asserts that we have exactly one clocksource and one
+ * clock_event_device in the end.
+ */
+static void __init efm32_timer_init(struct device_node *np)
+{
+ static int has_clocksource, has_clockevent;
+ int ret;
+
+ if (!has_clocksource) {
+ ret = efm32_clocksource_init(np);
+ if (!ret) {
+ has_clocksource = 1;
+ return;
+ }
+ }
+
+ if (!has_clockevent) {
+ ret = efm32_clockevent_init(np);
+ if (!ret) {
+ has_clockevent = 1;
+ return;
+ }
+ }
+}
+CLOCKSOURCE_OF_DECLARE(efm32, "efm32,timer", efm32_timer_init);
diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c
index ef3cfb269d8b..8a492d34ff9f 100644
--- a/drivers/clocksource/timer-prima2.c
+++ b/drivers/clocksource/timer-prima2.c
@@ -165,9 +165,9 @@ static struct irqaction sirfsoc_timer_irq = {
};
/* Overwrite weak default sched_clock with more precise one */
-static u32 notrace sirfsoc_read_sched_clock(void)
+static u64 notrace sirfsoc_read_sched_clock(void)
{
- return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff);
+ return sirfsoc_timer_read(NULL);
}
static void __init sirfsoc_clockevent_init(void)
@@ -206,7 +206,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np)
BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
- setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE);
+ sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE);
BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c
index 587e0202a70b..02821b06a39e 100644
--- a/drivers/clocksource/vf_pit_timer.c
+++ b/drivers/clocksource/vf_pit_timer.c
@@ -52,7 +52,7 @@ static inline void pit_irq_acknowledge(void)
__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
}
-static unsigned int pit_read_sched_clock(void)
+static u64 pit_read_sched_clock(void)
{
return __raw_readl(clksrc_base + PITCVAL);
}
@@ -64,7 +64,7 @@ static int __init pit_clocksource_init(unsigned long rate)
__raw_writel(~0UL, clksrc_base + PITLDVAL);
__raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL);
- setup_sched_clock(pit_read_sched_clock, 32, rate);
+ sched_clock_register(pit_read_sched_clock, 32, rate);
return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate,
300, 32, clocksource_mmio_readl_down);
}
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index 64f553f04fa4..ad3c0e83a779 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -137,14 +137,12 @@ static void __init vt8500_timer_init(struct device_node *np)
if (!regbase) {
pr_err("%s: Missing iobase description in Device Tree\n",
__func__);
- of_node_put(np);
return;
}
timer_irq = irq_of_parse_and_map(np, 0);
if (!timer_irq) {
pr_err("%s: Missing irq description in Device Tree\n",
__func__);
- of_node_put(np);
return;
}
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 72c5cdbe0791..544be722937c 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -72,6 +72,7 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm)
} else
err = -EINVAL;
+ pm_stay_awake(rtc->dev.parent);
mutex_unlock(&rtc->ops_lock);
/* A timer might have just expired */
schedule_work(&rtc->irqwork);
@@ -113,6 +114,7 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs)
err = -EINVAL;
}
+ pm_stay_awake(rtc->dev.parent);
mutex_unlock(&rtc->ops_lock);
/* A timer might have just expired */
schedule_work(&rtc->irqwork);
@@ -771,9 +773,10 @@ static int rtc_timer_enqueue(struct rtc_device *rtc, struct rtc_timer *timer)
alarm.time = rtc_ktime_to_tm(timer->node.expires);
alarm.enabled = 1;
err = __rtc_set_alarm(rtc, &alarm);
- if (err == -ETIME)
+ if (err == -ETIME) {
+ pm_stay_awake(rtc->dev.parent);
schedule_work(&rtc->irqwork);
- else if (err) {
+ } else if (err) {
timerqueue_del(&rtc->timerqueue, &timer->node);
timer->enabled = 0;
return err;
@@ -818,8 +821,10 @@ static void rtc_timer_remove(struct rtc_device *rtc, struct rtc_timer *timer)
alarm.time = rtc_ktime_to_tm(next->expires);
alarm.enabled = 1;
err = __rtc_set_alarm(rtc, &alarm);
- if (err == -ETIME)
+ if (err == -ETIME) {
+ pm_stay_awake(rtc->dev.parent);
schedule_work(&rtc->irqwork);
+ }
}
}
@@ -845,7 +850,6 @@ void rtc_timer_do_work(struct work_struct *work)
mutex_lock(&rtc->ops_lock);
again:
- pm_relax(rtc->dev.parent);
__rtc_read_time(rtc, &tm);
now = rtc_tm_to_ktime(tm);
while ((next = timerqueue_getnext(&rtc->timerqueue))) {
@@ -880,6 +884,7 @@ again:
} else
rtc_alarm_disable(rtc);
+ pm_relax(rtc->dev.parent);
mutex_unlock(&rtc->ops_lock);
}
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 0f0609b1aa2c..e3b25712b659 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -371,6 +371,7 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
}
}
+ device_init_wakeup(&adev->dev, 1);
ldata->rtc = rtc_device_register("pl031", &adev->dev, ops,
THIS_MODULE);
if (IS_ERR(ldata->rtc)) {
@@ -384,8 +385,6 @@ static int pl031_probe(struct amba_device *adev, const struct amba_id *id)
goto out_no_irq;
}
- device_init_wakeup(&adev->dev, 1);
-
return 0;
out_no_irq: