summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/char/tty_io.c8
-rw-r--r--drivers/media/dvb/frontends/dib7000m.c2
-rw-r--r--drivers/media/dvb/frontends/dib7000p.c2
-rw-r--r--drivers/media/video/em28xx/em28xx-i2c.c2
-rw-r--r--drivers/net/irda/donauboe.h2
-rw-r--r--drivers/net/wireless/prism54/islpci_dev.c2
-rw-r--r--drivers/net/wireless/wavelan_cs.c4
-rw-r--r--drivers/net/wireless/wavelan_cs.p.h2
-rw-r--r--drivers/sbus/char/bpp.c2
-rw-r--r--drivers/usb/serial/aircable.c4
-rw-r--r--drivers/usb/serial/io_edgeport.c4
-rw-r--r--drivers/video/matrox/matroxfb_Ti3026.c2
-rw-r--r--drivers/video/matrox/matroxfb_accel.c2
-rw-r--r--drivers/video/matrox/matroxfb_base.c2
-rw-r--r--drivers/video/matrox/matroxfb_misc.c2
15 files changed, 21 insertions, 21 deletions
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 7710a6a77d97..f6ac1d316ea4 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1573,11 +1573,11 @@ void no_tty(void)
/**
- * stop_tty - propogate flow control
+ * stop_tty - propagate flow control
* @tty: tty to stop
*
* Perform flow control to the driver. For PTY/TTY pairs we
- * must also propogate the TIOCKPKT status. May be called
+ * must also propagate the TIOCKPKT status. May be called
* on an already stopped device and will not re-call the driver
* method.
*
@@ -1607,11 +1607,11 @@ void stop_tty(struct tty_struct *tty)
EXPORT_SYMBOL(stop_tty);
/**
- * start_tty - propogate flow control
+ * start_tty - propagate flow control
* @tty: tty to start
*
* Start a tty that has been stopped if at all possible. Perform
- * any neccessary wakeups and propogate the TIOCPKT status. If this
+ * any neccessary wakeups and propagate the TIOCPKT status. If this
* is the tty was previous stopped and is being started then the
* driver start method is invoked and the line discipline woken.
*
diff --git a/drivers/media/dvb/frontends/dib7000m.c b/drivers/media/dvb/frontends/dib7000m.c
index f5d40aa3d27f..f64546c6aeb5 100644
--- a/drivers/media/dvb/frontends/dib7000m.c
+++ b/drivers/media/dvb/frontends/dib7000m.c
@@ -266,7 +266,7 @@ static int dib7000m_sad_calib(struct dib7000m_state *state)
{
/* internal */
-// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000m_write_word(state, 928, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
dib7000m_write_word(state, 929, (0 << 1) | (0 << 0));
dib7000m_write_word(state, 930, 776); // 0.625*3.3 / 4096
diff --git a/drivers/media/dvb/frontends/dib7000p.c b/drivers/media/dvb/frontends/dib7000p.c
index 0349a4b5da3f..aece458cfe12 100644
--- a/drivers/media/dvb/frontends/dib7000p.c
+++ b/drivers/media/dvb/frontends/dib7000p.c
@@ -223,7 +223,7 @@ static int dib7000p_set_bandwidth(struct dvb_frontend *demod, u8 BW_Idx)
static int dib7000p_sad_calib(struct dib7000p_state *state)
{
/* internal */
-// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is writting in set_bandwidth
+// dib7000p_write_word(state, 72, (3 << 14) | (1 << 12) | (524 << 0)); // sampling clock of the SAD is written in set_bandwidth
dib7000p_write_word(state, 73, (0 << 1) | (0 << 0));
dib7000p_write_word(state, 74, 776); // 0.625*3.3 / 4096
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
index 563a8319e608..54ccc6e1f92e 100644
--- a/drivers/media/video/em28xx/em28xx-i2c.c
+++ b/drivers/media/video/em28xx/em28xx-i2c.c
@@ -70,7 +70,7 @@ static int em2800_i2c_send_max4(struct em28xx *dev, unsigned char addr,
ret = dev->em28xx_write_regs(dev, 4 - len, &b2[4 - len], 2 + len);
if (ret != 2 + len) {
- em28xx_warn("writting to i2c device failed (error=%i)\n", ret);
+ em28xx_warn("writing to i2c device failed (error=%i)\n", ret);
return -EIO;
}
for (write_timeout = EM2800_I2C_WRITE_TIMEOUT; write_timeout > 0;
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 2ab173d9a0e4..1e67720f1066 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -113,7 +113,7 @@
/* RxOver overflow in Recv FIFO */
/* SipRcv received serial gap (or other condition you set) */
/* Interrupts are enabled by writing a one to the IER register */
-/* Interrupts are cleared by writting a one to the ISR register */
+/* Interrupts are cleared by writing a one to the ISR register */
/* */
/* 6. The remaining registers: 0x6 and 0x3 appear to be */
/* reserved parts of 16 or 32 bit registersthe remainder */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index a037b11dac9d..084795355b74 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -115,7 +115,7 @@ isl_upload_firmware(islpci_private *priv)
ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
- /* set the cards base address for writting the data */
+ /* set the card's base address for writing the data */
isl38xx_w32_flush(device_base, reg,
ISL38XX_DIR_MEM_BASE_REG);
wmb(); /* be paranoid */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 67b867f837ca..5740d4d4267c 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -176,7 +176,7 @@ psa_write(struct net_device * dev,
volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
(psaoff(0, psa_comp_number) << 1);
- /* Authorize writting to PSA */
+ /* Authorize writing to PSA */
hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
while(n-- > 0)
@@ -1676,7 +1676,7 @@ wv_set_frequency(u_long base, /* i/o port of the card */
fee_write(base, 0x60,
dac, 2);
- /* We now should verify here that the EEprom writting was ok */
+ /* We now should verify here that the EEprom writing was ok */
/* ReRead the first area */
fee_read(base, 0x00,
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index 4d1c4905c749..4b9de0093a7b 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -120,7 +120,7 @@
* the Wavelan itself (NCR -> AT&T -> Lucent).
*
* All started with Anders Klemets <klemets@paul.rutgers.edu>,
- * writting a Wavelan ISA driver for the MACH microkernel. Girish
+ * writing a Wavelan ISA driver for the MACH microkernel. Girish
* Welling <welling@paul.rutgers.edu> had also worked on it.
* Keith Moore modify this for the Pcmcia hardware.
*
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index 74b999d77bbf..4fab0c23814c 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -156,7 +156,7 @@ static unsigned short get_pins(unsigned minor)
#define BPP_ICR 0x18
#define BPP_SIZE 0x1A
-/* BPP_CSR. Bits of type RW1 are cleared with writting '1'. */
+/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */
#define P_DEV_ID_MASK 0xf0000000 /* R */
#define P_DEV_ID_ZEBRA 0x40000000
#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index b675735bfbee..fbc8c27d5d99 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -9,7 +9,7 @@
* The device works as an standard CDC device, it has 2 interfaces, the first
* one is for firmware access and the second is the serial one.
* The protocol is very simply, there are two posibilities reading or writing.
- * When writting the first urb must have a Header that starts with 0x20 0x29 the
+ * When writing the first urb must have a Header that starts with 0x20 0x29 the
* next two bytes must say how much data will be sended.
* When reading the process is almost equal except that the header starts with
* 0x00 0x20.
@@ -18,7 +18,7 @@
* buffer: The First and Second byte is used for a Header, the Third and Fourth
* tells the device the amount of information the package holds.
* Packages are 60 bytes long Header Stuff.
- * When writting to the device the first two bytes of the header are 0x20 0x29
+ * When writing to the device the first two bytes of the header are 0x20 0x29
* When reading the bytes are 0x00 0x20, or 0x00 0x10, there is an strange
* situation, when too much data arrives to the device because it sends the data
* but with out the header. I will use a simply hack to override this situation,
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 18f74ac76565..4807f960150b 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -2465,7 +2465,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
((edge_serial->is_epic) &&
(!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
(regNum == MCR))) {
- dbg("SendCmdWriteUartReg - Not writting to MCR Register");
+ dbg("SendCmdWriteUartReg - Not writing to MCR Register");
return 0;
}
@@ -2473,7 +2473,7 @@ static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 r
((edge_serial->is_epic) &&
(!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
(regNum == LCR))) {
- dbg ("SendCmdWriteUartReg - Not writting to LCR Register");
+ dbg ("SendCmdWriteUartReg - Not writing to LCR Register");
return 0;
}
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index a5690a5f29d5..9445cdb759b1 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -72,7 +72,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/matrox/matroxfb_accel.c
index a5c825d99466..c57aaadf410c 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/matrox/matroxfb_accel.c
@@ -70,7 +70,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index cb2aa402ddfd..c8559a756b75 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -93,7 +93,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/matrox/matroxfb_misc.c
index 18886b629cb1..5948e54b9ef9 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/matrox/matroxfb_misc.c
@@ -78,7 +78,7 @@
* (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de>
*
* (following author is not in any relation with this code, but his ideas
- * were used when writting this driver)
+ * were used when writing this driver)
*
* FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk>
*
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 14:50:20 +0000