diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/input/keyboard/atkbd.c | 36 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 1 | ||||
| -rw-r--r-- | drivers/input/misc/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/input/serio/i8042.c | 35 |
4 files changed, 66 insertions, 7 deletions
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index a6512372c7a3..4452eabbee6d 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -233,6 +233,7 @@ struct atkbd { */ static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); static void *atkbd_platform_fixup_data; +static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); @@ -393,6 +394,9 @@ static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, input_event(dev, EV_MSC, MSC_RAW, code); + if (atkbd_platform_scancode_fixup) + code = atkbd_platform_scancode_fixup(atkbd, code); + if (atkbd->translated) { if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { @@ -923,6 +927,22 @@ static unsigned int atkbd_volume_forced_release_keys[] = { }; /* + * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas + * they should be generating e4-e6 (0x80 | code). + */ +static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, + unsigned int code) +{ + if (atkbd->translated && atkbd->emul == 1 && + (code == 0x64 || code == 0x65 || code == 0x66)) { + atkbd->emul = 0; + code |= 0x80; + } + + return code; +} + +/* * atkbd_set_keycode_table() initializes keyboard's keycode table * according to the selected scancode set */ @@ -1527,6 +1547,13 @@ static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) return 0; } +static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) +{ + atkbd_platform_scancode_fixup = id->driver_data; + + return 0; +} + static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { { .ident = "Dell Laptop", @@ -1663,6 +1690,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { .callback = atkbd_setup_forced_release, .driver_data = atkdb_soltech_ta12_forced_release_keys, }, + { + .ident = "OQO Model 01+", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "OQO"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), + }, + .callback = atkbd_setup_scancode_fixup, + .driver_data = atkbd_oqo_01plus_scancode_fixup, + }, { } }; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index a88aff3816a0..77d130914259 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -147,6 +147,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) } error = request_irq(irq, gpio_keys_isr, + IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, button->desc ? button->desc : "gpio_keys", bdata); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 02f4f8f1db6f..a9bb2544b2de 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -227,6 +227,7 @@ config INPUT_WINBOND_CIR depends on X86 && PNP select NEW_LEDS select LEDS_CLASS + select LEDS_TRIGGERS select BITREVERSE help Say Y here if you want to use the IR remote functionality found diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index a31578170ccc..1df02d25aca5 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -836,17 +836,32 @@ static int i8042_controller_selftest(void) static int i8042_controller_init(void) { unsigned long flags; + int n = 0; + unsigned char ctr[2]; /* - * Save the CTR for restoral on unload / reboot. + * Save the CTR for restore on unload / reboot. */ - if (i8042_command(&i8042_ctr, I8042_CMD_CTL_RCTR)) { - printk(KERN_ERR "i8042.c: Can't read CTR while initializing i8042.\n"); - return -EIO; - } + do { + if (n >= 10) { + printk(KERN_ERR + "i8042.c: Unable to get stable CTR read.\n"); + return -EIO; + } + + if (n != 0) + udelay(50); + + if (i8042_command(&ctr[n++ % 2], I8042_CMD_CTL_RCTR)) { + printk(KERN_ERR + "i8042.c: Can't read CTR while initializing i8042.\n"); + return -EIO; + } - i8042_initial_ctr = i8042_ctr; + } while (n < 2 || ctr[0] != ctr[1]); + + i8042_initial_ctr = i8042_ctr = ctr[0]; /* * Disable the keyboard interface and interrupt. @@ -895,6 +910,12 @@ static int i8042_controller_init(void) return -EIO; } +/* + * Flush whatever accumulated while we were disabling keyboard port. + */ + + i8042_flush(); + return 0; } @@ -914,7 +935,7 @@ static void i8042_controller_reset(void) i8042_ctr |= I8042_CTR_KBDDIS | I8042_CTR_AUXDIS; i8042_ctr &= ~(I8042_CTR_KBDINT | I8042_CTR_AUXINT); - if (i8042_command(&i8042_initial_ctr, I8042_CMD_CTL_WCTR)) + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) printk(KERN_WARNING "i8042.c: Can't write CTR while resetting.\n"); /* |