diff options
Diffstat (limited to 'drivers')
88 files changed, 1230 insertions, 3993 deletions
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index e944aa0c5517..806292160b3f 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -34,7 +34,6 @@ #include <linux/ata.h> #include <linux/libata.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -168,63 +167,26 @@ static struct ata_port_operations pcmcia_8bit_port_ops = { }; -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } + int *is_kme = priv_data; + + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } /** @@ -239,7 +201,6 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) { struct ata_host *host; struct ata_port *ap; - struct pcmcia_config_check *stk = NULL; int is_kme = 0, ret = -ENOMEM, p; unsigned long io_base, ctl_base; void __iomem *io_addr, *ctl_addr; @@ -247,10 +208,8 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) struct ata_port_operations *ops = &pcmcia_port_ops; /* Set up attributes in order to probe card and get resources */ - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - pdev->conf.Attributes = CONF_ENABLE_IRQ; - pdev->conf.IntType = INT_MEMORY_AND_IO; + pdev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; /* See if we have a manufacturer identifier. Use it to set is_kme for vendor quirks */ @@ -258,25 +217,21 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) ((pdev->card_id == PRODID_KME_KXLC005_A) || (pdev->card_id == PRODID_KME_KXLC005_B))); - /* Allocate resoure probing structures */ - - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto out1; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(pdev, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) { + pdev->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(pdev, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } io_base = pdev->resource[0]->start; - ctl_base = stk->ctl_base; + if (pdev->resource[1]->end) + ctl_base = pdev->resource[1]->start; + else + ctl_base = pdev->resource[0]->start + 0x0e; + if (!pdev->irq) goto failed; - ret = pcmcia_request_configuration(pdev, &pdev->conf); + ret = pcmcia_enable_device(pdev); if (ret) goto failed; @@ -329,13 +284,10 @@ static int pcmcia_init_one(struct pcmcia_device *pdev) goto failed; pdev->priv = host; - kfree(stk); return 0; failed: - kfree(stk); pcmcia_disable_device(pdev); -out1: return ret; } @@ -430,9 +382,7 @@ MODULE_DEVICE_TABLE(pcmcia, pcmcia_devices); static struct pcmcia_driver pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .id_table = pcmcia_devices, .probe = pcmcia_init_one, .remove = pcmcia_remove_one, diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c index d52e90a5a617..4104b7feae67 100644 --- a/drivers/bluetooth/bluecard_cs.c +++ b/drivers/bluetooth/bluecard_cs.c @@ -39,7 +39,6 @@ #include <linux/skbuff.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -865,8 +864,7 @@ static int bluecard_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; return bluecard_config(link); } @@ -886,7 +884,7 @@ static int bluecard_config(struct pcmcia_device *link) bluecard_info_t *info = link->priv; int i, n; - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 64; @@ -906,7 +904,7 @@ static int bluecard_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -942,9 +940,7 @@ MODULE_DEVICE_TABLE(pcmcia, bluecard_ids); static struct pcmcia_driver bluecard_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bluecard_cs", - }, + .name = "bluecard_cs", .probe = bluecard_probe, .remove = bluecard_detach, .id_table = bluecard_ids, diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c index 7ab8f29d5e0d..0c8a65587491 100644 --- a/drivers/bluetooth/bt3c_cs.c +++ b/drivers/bluetooth/bt3c_cs.c @@ -45,7 +45,6 @@ #include <linux/device.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -657,11 +656,8 @@ static int bt3c_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return bt3c_config(link); } @@ -675,43 +671,41 @@ static void bt3c_detach(struct pcmcia_device *link) kfree(info); } -static int bt3c_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int bt3c_check_config(struct pcmcia_device *p_dev, void *priv_data) { - unsigned long try = (unsigned long) priv_data; + int *try = priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (try == 0) + p_dev->io_lines = 16; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int bt3c_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -742,7 +736,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -775,9 +769,7 @@ MODULE_DEVICE_TABLE(pcmcia, bt3c_ids); static struct pcmcia_driver bt3c_driver = { .owner = THIS_MODULE, - .drv = { - .name = "bt3c_cs", - }, + .name = "bt3c_cs", .probe = bt3c_probe, .remove = bt3c_detach, .id_table = bt3c_ids, diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c index 1c4f5e863b03..f8a0708e2311 100644 --- a/drivers/bluetooth/btuart_cs.c +++ b/drivers/bluetooth/btuart_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -586,11 +585,8 @@ static int btuart_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_SET_IO; return btuart_config(link); } @@ -604,43 +600,41 @@ static void btuart_detach(struct pcmcia_device *link) kfree(info); } -static int btuart_check_config(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int btuart_check_config(struct pcmcia_device *p_dev, void *priv_data) { int *try = priv_data; - p_dev->io_lines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if (try == 0) + p_dev->io_lines = 16; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && - (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + if ((p_dev->resource[0]->end != 8) || (p_dev->resource[0]->start == 0)) + return -EINVAL; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int btuart_check_config_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -671,7 +665,7 @@ found_port: if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -703,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, btuart_ids); static struct pcmcia_driver btuart_driver = { .owner = THIS_MODULE, - .drv = { - .name = "btuart_cs", - }, + .name = "btuart_cs", .probe = btuart_probe, .remove = btuart_detach, .id_table = btuart_ids, diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c index db7c8db695fc..26ee0cf88d20 100644 --- a/drivers/bluetooth/dtl1_cs.c +++ b/drivers/bluetooth/dtl1_cs.c @@ -41,7 +41,6 @@ #include <asm/system.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -572,11 +571,7 @@ static int dtl1_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return dtl1_config(link); } @@ -591,18 +586,14 @@ static void dtl1_detach(struct pcmcia_device *link) kfree(info); } -static int dtl1_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int dtl1_confcheck(struct pcmcia_device *p_dev, void *priv_data) { - if ((cf->io.nwin != 1) || (cf->io.win[0].len <= 8)) + if ((p_dev->resource[1]->end) || (p_dev->resource[1]->end < 8)) return -ENODEV; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; /*yo */ - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + return pcmcia_request_io(p_dev); } @@ -620,7 +611,7 @@ static int dtl1_config(struct pcmcia_device *link) if (i != 0) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; @@ -656,9 +647,7 @@ MODULE_DEVICE_TABLE(pcmcia, dtl1_ids); static struct pcmcia_driver dtl1_driver = { .owner = THIS_MODULE, - .drv = { - .name = "dtl1_cs", - }, + .name = "dtl1_cs", .probe = dtl1_probe, .remove = dtl1_detach, .id_table = dtl1_ids, diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index ec73d9f6d9ed..c7b482d15e2a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -34,7 +34,6 @@ #include <linux/uaccess.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -55,8 +54,6 @@ __func__ , ## args); \ } while (0) -static char *version = "cm4000_cs.c v2.4.0gm6 - All bugs added by Harald Welte"; - #define T_1SEC (HZ) #define T_10MSEC msecs_to_jiffies(10) #define T_20MSEC msecs_to_jiffies(20) @@ -1742,20 +1739,8 @@ static void cmm_cm4000_release(struct pcmcia_device * link) /*==== Interface to PCMCIA Layer =======================================*/ -static int cm4000_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -1763,13 +1748,13 @@ static int cm4000_config(struct pcmcia_device * link, int devno) { struct cm4000_dev *dev; + link->config_flags |= CONF_AUTO_SET_IO; + /* read the config-tuples */ if (pcmcia_loop_config(link, cm4000_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto cs_release; dev = link->priv; @@ -1829,7 +1814,6 @@ static int cm4000_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); @@ -1891,9 +1875,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4000_ids); static struct pcmcia_driver cm4000_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4000_cs", - }, + .name = "cm4000_cs", .probe = cm4000_probe, .remove = cm4000_detach, .suspend = cm4000_suspend, @@ -1905,8 +1887,6 @@ static int __init cmm_init(void) { int rc; - printk(KERN_INFO "%s\n", version); - cmm_class = class_create(THIS_MODULE, "cardman_4000"); if (IS_ERR(cmm_class)) return PTR_ERR(cmm_class); @@ -1931,7 +1911,6 @@ static int __init cmm_init(void) static void __exit cmm_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&cm4000_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmm_class); diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c index 815cde1d0570..bf2f046fc2c1 100644 --- a/drivers/char/pcmcia/cm4040_cs.c +++ b/drivers/char/pcmcia/cm4040_cs.c @@ -29,7 +29,6 @@ #include <asm/uaccess.h> #include <asm/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -49,9 +48,6 @@ __func__ , ## args); \ } while (0) -static char *version = -"OMNIKEY CardMan 4040 v1.1.0gm5 - All bugs added by Harald Welte"; - #define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ) #define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ) #define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ) @@ -516,26 +512,9 @@ static void cm4040_reader_release(struct pcmcia_device *link) return; } -static int cm4040_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int rc; - if (!cfg->io.nwin) - return -ENODEV; - - /* Get the IOaddr */ - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - rc = pcmcia_request_io(p_dev); - - dev_printk(KERN_INFO, &p_dev->dev, - "pcmcia_request_io returned 0x%x\n", rc); - return rc; + return pcmcia_request_io(p_dev); } @@ -544,15 +523,15 @@ static int reader_config(struct pcmcia_device *link, int devno) struct reader_dev *dev; int fail_rc; + link->config_flags |= CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, cm4040_config_check, NULL)) goto cs_release; - link->conf.IntType = 00000002; - - fail_rc = pcmcia_request_configuration(link, &link->conf); + fail_rc = pcmcia_enable_device(link); if (fail_rc != 0) { dev_printk(KERN_INFO, &link->dev, - "pcmcia_request_configuration failed 0x%x\n", + "pcmcia_enable_device failed 0x%x\n", fail_rc); goto cs_release; } @@ -599,7 +578,6 @@ static int reader_probe(struct pcmcia_device *link) link->priv = dev; dev->p_dev = link; - link->conf.IntType = INT_MEMORY_AND_IO; dev_table[i] = link; init_waitqueue_head(&dev->devq); @@ -662,9 +640,7 @@ MODULE_DEVICE_TABLE(pcmcia, cm4040_ids); static struct pcmcia_driver reader_driver = { .owner = THIS_MODULE, - .drv = { - .name = "cm4040_cs", - }, + .name = "cm4040_cs", .probe = reader_probe, .remove = reader_detach, .id_table = cm4040_ids, @@ -674,7 +650,6 @@ static int __init cm4040_init(void) { int rc; - printk(KERN_INFO "%s\n", version); cmx_class = class_create(THIS_MODULE, "cardman_4040"); if (IS_ERR(cmx_class)) return PTR_ERR(cmx_class); @@ -699,7 +674,6 @@ static int __init cm4040_init(void) static void __exit cm4040_exit(void) { - printk(KERN_INFO MODULE_NAME ": unloading\n"); pcmcia_unregister_driver(&reader_driver); unregister_chrdev(major, DEVICE_NAME); class_destroy(cmx_class); diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 67bdb05798b1..94b8eb4d691d 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -32,7 +32,6 @@ #include <pcmcia/device_id.h> #include <pcmcia/ss.h> #include <pcmcia/ds.h> -#include <pcmcia/cs.h> static struct pcmcia_device_id ipw_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x02f2, 0x0100), @@ -76,23 +75,18 @@ static void signalled_reboot_callback(void *callback_data) schedule_work(&ipw->work_reboot); } -static int ipwireless_probe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int ipwireless_probe(struct pcmcia_device *p_dev, void *priv_data) { struct ipw_dev *ipw = priv_data; struct resource *io_resource; int ret; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; /* 0x40 causes it to generate level mode interrupts. */ /* 0x04 enables IREQ pin. */ - p_dev->conf.ConfigIndex = cfg->index | 0x44; + p_dev->config_index |= 0x44; p_dev->io_lines = 16; ret = pcmcia_request_io(p_dev); if (ret) @@ -102,65 +96,49 @@ static int ipwireless_probe(struct pcmcia_device *p_dev, resource_size(p_dev->resource[0]), IPWIRELESS_PCCARD_NAME); - if (cfg->mem.nwin == 0) - return 0; - - ipw->request_common_memory.Attributes = + p_dev->resource[2]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_CM | WIN_ENABLE; - ipw->request_common_memory.Base = cfg->mem.win[0].host_addr; - ipw->request_common_memory.Size = cfg->mem.win[0].len; - if (ipw->request_common_memory.Size < 0x1000) - ipw->request_common_memory.Size = 0x1000; - ipw->request_common_memory.AccessSpeed = 0; - - ret = pcmcia_request_window(p_dev, &ipw->request_common_memory, - &ipw->handle_common_memory); + ret = pcmcia_request_window(p_dev, p_dev->resource[2], 0); if (ret != 0) goto exit1; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_common_memory, - cfg->mem.win[0].card_addr); - + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[2], p_dev->card_addr); if (ret != 0) goto exit2; - ipw->is_v2_card = cfg->mem.win[0].len == 0x100; + ipw->is_v2_card = resource_size(p_dev->resource[2]) == 0x100; - ipw->common_memory = ioremap(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); - request_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size, + ipw->attr_memory = ioremap(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + request_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2]), IPWIRELESS_PCCARD_NAME); - ipw->request_attr_memory.Attributes = - WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | WIN_ENABLE; - ipw->request_attr_memory.Base = 0; - ipw->request_attr_memory.Size = 0; /* this used to be 0x1000 */ - ipw->request_attr_memory.AccessSpeed = 0; - - ret = pcmcia_request_window(p_dev, &ipw->request_attr_memory, - &ipw->handle_attr_memory); - + p_dev->resource[3]->flags |= WIN_DATA_WIDTH_16 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + p_dev->resource[3]->end = 0; /* this used to be 0x1000 */ + ret = pcmcia_request_window(p_dev, p_dev->resource[3], 0); if (ret != 0) goto exit2; - ret = pcmcia_map_mem_page(p_dev, ipw->handle_attr_memory, 0); + ret = pcmcia_map_mem_page(p_dev, p_dev->resource[3], 0); if (ret != 0) goto exit3; - ipw->attr_memory = ioremap(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); - request_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size, IPWIRELESS_PCCARD_NAME); + ipw->attr_memory = ioremap(p_dev->resource[3]->start, + resource_size(p_dev->resource[3])); + request_mem_region(p_dev->resource[3]->start, + resource_size(p_dev->resource[3]), + IPWIRELESS_PCCARD_NAME); return 0; exit3: exit2: if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); iounmap(ipw->common_memory); } exit1: @@ -175,14 +153,13 @@ static int config_ipwireless(struct ipw_dev *ipw) int ret = 0; ipw->is_v2_card = 0; + link->config_flags |= CONF_AUTO_SET_IO | CONF_AUTO_SET_IOMEM | + CONF_ENABLE_IRQ; ret = pcmcia_loop_config(link, ipwireless_probe, ipw); if (ret != 0) return ret; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - INIT_WORK(&ipw->work_reboot, signalled_reboot_work); ipwireless_init_hardware_v1(ipw->hardware, link->resource[0]->start, @@ -201,13 +178,9 @@ static int config_ipwireless(struct ipw_dev *ipw) (unsigned int) link->irq); if (ipw->attr_memory && ipw->common_memory) printk(KERN_INFO IPWIRELESS_PCCARD_NAME - ": attr memory 0x%08lx-0x%08lx, common memory 0x%08lx-0x%08lx\n", - ipw->request_attr_memory.Base, - ipw->request_attr_memory.Base - + ipw->request_attr_memory.Size - 1, - ipw->request_common_memory.Base, - ipw->request_common_memory.Base - + ipw->request_common_memory.Size - 1); + ": attr memory %pR, common memory %pR\n", + link->resource[3], + link->resource[2]); ipw->network = ipwireless_network_create(ipw->hardware); if (!ipw->network) @@ -223,25 +196,23 @@ static int config_ipwireless(struct ipw_dev *ipw) * Do the RequestConfiguration last, because it enables interrupts. * Then we don't get any interrupts before we're ready for them. */ - ret = pcmcia_request_configuration(link, &link->conf); - + ret = pcmcia_enable_device(link); if (ret != 0) goto exit; return 0; exit: - if (ipw->attr_memory) { - release_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); - iounmap(ipw->attr_memory); - - } if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(link->resource[2]->start, + resource_size(link->resource[2])); iounmap(ipw->common_memory); } + if (ipw->attr_memory) { + release_mem_region(link->resource[3]->start, + resource_size(link->resource[3])); + iounmap(ipw->attr_memory); + } pcmcia_disable_device(link); return -1; } @@ -249,13 +220,13 @@ exit: static void release_ipwireless(struct ipw_dev *ipw) { if (ipw->common_memory) { - release_mem_region(ipw->request_common_memory.Base, - ipw->request_common_memory.Size); + release_mem_region(ipw->link->resource[2]->start, + resource_size(ipw->link->resource[2])); iounmap(ipw->common_memory); } if (ipw->attr_memory) { - release_mem_region(ipw->request_attr_memory.Base, - ipw->request_attr_memory.Size); + release_mem_region(ipw->link->resource[3]->start, + resource_size(ipw->link->resource[3])); iounmap(ipw->attr_memory); } pcmcia_disable_device(ipw->link); @@ -324,7 +295,7 @@ static struct pcmcia_driver me = { .owner = THIS_MODULE, .probe = ipwireless_attach, .remove = ipwireless_detach, - .drv = { .name = IPWIRELESS_PCCARD_NAME }, + .name = IPWIRELESS_PCCARD_NAME, .id_table = ipw_ids }; @@ -336,9 +307,6 @@ static int __init init_ipwireless(void) { int ret; - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " by " IPWIRELESS_PCMCIA_AUTHOR "\n"); - ret = ipwireless_tty_init(); if (ret != 0) return ret; @@ -355,9 +323,6 @@ static int __init init_ipwireless(void) */ static void __exit exit_ipwireless(void) { - printk(KERN_INFO IPWIRELESS_PCCARD_NAME " " - IPWIRELESS_PCMCIA_VERSION " removed\n"); - pcmcia_unregister_driver(&me); ipwireless_tty_release(); } diff --git a/drivers/char/pcmcia/ipwireless/main.h b/drivers/char/pcmcia/ipwireless/main.h index c207be87b597..f2cbb116bccb 100644 --- a/drivers/char/pcmcia/ipwireless/main.h +++ b/drivers/char/pcmcia/ipwireless/main.h @@ -21,7 +21,6 @@ #include <linux/sched.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -45,13 +44,9 @@ struct ipw_dev { struct pcmcia_device *link; int is_v2_card; - window_handle_t handle_attr_memory; void __iomem *attr_memory; - win_req_t request_attr_memory; - window_handle_t handle_common_memory; void __iomem *common_memory; - win_req_t request_common_memory; /* Reference to attribute memory, containing CIS data */ void *attribute_memory; diff --git a/drivers/char/pcmcia/ipwireless/tty.h b/drivers/char/pcmcia/ipwireless/tty.h index 3e163d4cab15..747b2d637860 100644 --- a/drivers/char/pcmcia/ipwireless/tty.h +++ b/drivers/char/pcmcia/ipwireless/tty.h @@ -21,7 +21,6 @@ #include <linux/types.h> #include <linux/sched.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index 9ecd6bef5d3b..be1810057607 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -70,7 +70,6 @@ #include <linux/workqueue.h> #include <linux/hdlc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -550,9 +549,6 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Initialize the struct pcmcia_device structure */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - ret = mgslpc_config(link); if (ret) return ret; @@ -565,20 +561,8 @@ static int mgslpc_probe(struct pcmcia_device *link) /* Card has been inserted. */ -static int mgslpc_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { - if (!cfg->io.nwin) - return -ENODEV; - - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->resource[0]->flags |= pcmcia_io_cfg_data_width(cfg->io.flags); - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; - return pcmcia_request_io(p_dev); } @@ -590,32 +574,24 @@ static int mgslpc_config(struct pcmcia_device *link) if (debug_level >= DEBUG_LEVEL_INFO) printk("mgslpc_config(0x%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); if (ret != 0) goto failed; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 8; - link->conf.Present = PRESENT_OPTION; + link->config_index = 8; + link->config_regs = PRESENT_OPTION; ret = pcmcia_request_irq(link, mgslpc_isr); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; info->io_base = link->resource[0]->start; info->irq_level = link->irq; - - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - printk("\n"); return 0; failed: @@ -2797,9 +2773,7 @@ MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids); static struct pcmcia_driver mgslpc_driver = { .owner = THIS_MODULE, - .drv = { - .name = "synclink_cs", - }, + .name = "synclink_cs", .probe = mgslpc_probe, .remove = mgslpc_detach, .id_table = mgslpc_ids, @@ -2835,8 +2809,6 @@ static void synclink_cs_cleanup(void) { int rc; - printk("Unloading %s: version %s\n", driver_name, driver_version); - while(mgslpc_device_list) mgslpc_remove_device(mgslpc_device_list); @@ -2859,8 +2831,6 @@ static int __init synclink_cs_init(void) BREAKPOINT(); } - printk("%s %s\n", driver_name, driver_version); - if ((rc = pcmcia_register_driver(&mgslpc_driver)) < 0) return rc; @@ -4127,6 +4097,8 @@ static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (cmd != SIOCWANDEV) return hdlc_ioctl(dev, ifr, cmd); + memset(&new_line, 0, size); + switch(ifr->ifr_settings.type) { case IF_GET_IFACE: /* return current sync_serial_settings */ diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index 2a4cb9c18f01..404843e8611b 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c @@ -43,7 +43,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -72,17 +71,6 @@ static int ide_config(struct pcmcia_device *); static void ide_detach(struct pcmcia_device *p_dev); - - - -/*====================================================================== - - ide_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int ide_probe(struct pcmcia_device *link) { ide_info_t *info; @@ -97,23 +85,12 @@ static int ide_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO | + CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC; return ide_config(link); } /* ide_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -187,79 +164,31 @@ out_release: return NULL; } -/*====================================================================== - - ide_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ide device available to the system. - -======================================================================*/ - -struct pcmcia_config_check { - unsigned long ctl_base; - int skip_vcc; - int is_kme; -}; - -static int pcmcia_check_one_config(struct pcmcia_device *pdev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data) { - struct pcmcia_config_check *stk = priv_data; - - /* Check for matching Vcc, unless we're desperate */ - if (!stk->skip_vcc) { - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) - return -ENODEV; - } - } + int *is_kme = priv_data; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - pdev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - pdev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - pdev->conf.ConfigIndex = cfg->index; - pdev->resource[0]->start = io->win[0].base; - if (!(io->flags & CISTPL_IO_16BIT)) { - pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - } - if (io->nwin == 2) { - pdev->resource[0]->end = 8; - pdev->resource[1]->start = io->win[1].base; - pdev->resource[1]->end = (stk->is_kme) ? 2 : 1; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[1]->start; - } else if ((io->nwin == 1) && (io->win[0].len >= 16)) { - pdev->resource[0]->end = io->win[0].len; - pdev->resource[1]->end = 0; - if (pcmcia_request_io(pdev) != 0) - return -ENODEV; - stk->ctl_base = pdev->resource[0]->start + 0x0e; - } else + if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) { + pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + } + pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pdev->resource[1]->end) { + pdev->resource[0]->end = 8; + pdev->resource[1]->end = (*is_kme) ? 2 : 1; + } else { + if (pdev->resource[0]->end < 16) return -ENODEV; - /* If we've got this far, we're done */ - return 0; } - return -ENODEV; + + return pcmcia_request_io(pdev); } static int ide_config(struct pcmcia_device *link) { ide_info_t *info = link->priv; - struct pcmcia_config_check *stk = NULL; int ret = 0, is_kme = 0; unsigned long io_base, ctl_base; struct ide_host *host; @@ -270,23 +199,21 @@ static int ide_config(struct pcmcia_device *link) ((link->card_id == PRODID_KME_KXLC005_A) || (link->card_id == PRODID_KME_KXLC005_B))); - stk = kzalloc(sizeof(*stk), GFP_KERNEL); - if (!stk) - goto err_mem; - stk->is_kme = is_kme; - stk->skip_vcc = io_base = ctl_base = 0; - - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) { - stk->skip_vcc = 1; - if (pcmcia_loop_config(link, pcmcia_check_one_config, stk)) + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) { + link->config_flags &= ~CONF_AUTO_CHECK_VCC; + if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) goto failed; /* No suitable config found */ } io_base = link->resource[0]->start; - ctl_base = stk->ctl_base; + if (link->resource[1]->end) + ctl_base = link->resource[1]->start; + else + ctl_base = link->resource[0]->start + 0x0e; if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -311,29 +238,15 @@ static int ide_config(struct pcmcia_device *link) info->host = host; dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n", 'a' + host->ports[0]->index * 2, - link->conf.Vpp / 10, link->conf.Vpp % 10); + link->vpp / 10, link->vpp % 10); - kfree(stk); return 0; -err_mem: - printk(KERN_NOTICE "ide-cs: ide_config failed memory allocation\n"); - goto failed; - failed: - kfree(stk); ide_release(link); return -ENODEV; } /* ide_config */ -/*====================================================================== - - After a card is removed, ide_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ide_release(struct pcmcia_device *link) { ide_info_t *info = link->priv; @@ -359,15 +272,6 @@ static void ide_release(struct pcmcia_device *link) } /* ide_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the ide drivers from - talking to the ports. - -======================================================================*/ - static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_FUNC_ID(4), PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */ @@ -440,9 +344,7 @@ MODULE_DEVICE_TABLE(pcmcia, ide_ids); static struct pcmcia_driver ide_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ide-cs", - }, + .name = "ide-cs", .probe = ide_probe, .remove = ide_detach, .id_table = ide_ids, diff --git a/drivers/isdn/hardware/avm/avm_cs.c b/drivers/isdn/hardware/avm/avm_cs.c index 09b1795516f4..91f06a3ef002 100644 --- a/drivers/isdn/hardware/avm/avm_cs.c +++ b/drivers/isdn/hardware/avm/avm_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -39,87 +38,32 @@ MODULE_LICENSE("GPL"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avmcs_config(struct pcmcia_device *link); static void avmcs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avmcs_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - avmcs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int avmcs_probe(struct pcmcia_device *p_dev) { - - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avmcs_config(p_dev); } /* avmcs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ static void avmcs_detach(struct pcmcia_device *link) { avmcs_release(link); } /* avmcs_detach */ -/*====================================================================== - - avmcs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - -static int avmcs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int avmcs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; return pcmcia_request_io(p_dev); } @@ -150,7 +94,7 @@ static int avmcs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; @@ -197,13 +141,6 @@ static int avmcs_config(struct pcmcia_device *link) } /* avmcs_config */ -/*====================================================================== - - After a card is removed, avmcs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ static void avmcs_release(struct pcmcia_device *link) { @@ -222,9 +159,7 @@ MODULE_DEVICE_TABLE(pcmcia, avmcs_ids); static struct pcmcia_driver avmcs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avm_cs", - }, + .name = "avm_cs", .probe = avmcs_probe, .remove = avmcs_detach, .id_table = avmcs_ids, diff --git a/drivers/isdn/hisax/avma1_cs.c b/drivers/isdn/hisax/avma1_cs.c index 94263c22b874..ac4dd7857cbd 100644 --- a/drivers/isdn/hisax/avma1_cs.c +++ b/drivers/isdn/hisax/avma1_cs.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include "hisax_cfg.h" @@ -40,67 +39,22 @@ module_param(isdnprot, int, 0); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the skeleton event - handler. -*/ - static int avma1cs_config(struct pcmcia_device *link) __devinit ; static void avma1cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void avma1cs_detach(struct pcmcia_device *p_dev) __devexit ; - -/*====================================================================== - - avma1cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit avma1cs_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "avma1cs_attach()\n"); - /* The io structure describes IO port mapping */ - p_dev->resource[0]->end = 16; - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->end = 16; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_16; - /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; - p_dev->conf.Present = PRESENT_OPTION; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + p_dev->config_index = 1; + p_dev->config_regs = PRESENT_OPTION; return avma1cs_config(p_dev); } /* avma1cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit avma1cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "avma1cs_detach(0x%p)\n", link); @@ -108,26 +62,13 @@ static void __devexit avma1cs_detach(struct pcmcia_device *link) kfree(link->priv); } /* avma1cs_detach */ -/*====================================================================== - - avma1cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - -static int avma1cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int avma1cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - if (cf->io.nwin <= 0) - return -ENODEV; - - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[0]->end = cf->io.win[0].len; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->io_lines = 5; + return pcmcia_request_io(p_dev); } @@ -161,7 +102,7 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) /* * configure the PCMCIA socket */ - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) { pcmcia_disable_device(link); break; @@ -175,9 +116,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return -ENODEV; } - printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n", - (unsigned int) link->resource[0]->start, link->irq); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = isdnprot; @@ -196,14 +134,6 @@ static int __devinit avma1cs_config(struct pcmcia_device *link) return 0; } /* avma1cs_config */ -/*====================================================================== - - After a card is removed, avma1cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void avma1cs_release(struct pcmcia_device *link) { unsigned long minor = (unsigned long) link->priv; @@ -216,7 +146,6 @@ static void avma1cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* avma1cs_release */ - static struct pcmcia_device_id avma1cs_ids[] = { PCMCIA_DEVICE_PROD_ID12("AVM", "ISDN A", 0x95d42008, 0xadc9d4bb), PCMCIA_DEVICE_PROD_ID12("ISDN", "CARD", 0x8d9761c8, 0x01c5aa7b), @@ -226,19 +155,15 @@ MODULE_DEVICE_TABLE(pcmcia, avma1cs_ids); static struct pcmcia_driver avma1cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "avma1_cs", - }, + .name = "avma1_cs", .probe = avma1cs_probe, .remove = __devexit_p(avma1cs_detach), .id_table = avma1cs_ids, }; -/*====================================================================*/ - static int __init init_avma1_cs(void) { - return(pcmcia_register_driver(&avma1cs_driver)); + return pcmcia_register_driver(&avma1cs_driver); } static void __exit exit_avma1_cs(void) diff --git a/drivers/isdn/hisax/elsa_cs.c b/drivers/isdn/hisax/elsa_cs.c index b3c08aaf41c4..496d477af0f8 100644 --- a/drivers/isdn/hisax/elsa_cs.c +++ b/drivers/isdn/hisax/elsa_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,8 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the elsa_cs event - handler. -*/ - static int elsa_cs_config(struct pcmcia_device *link) __devinit ; static void elsa_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void elsa_cs_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +73,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - elsa_cs_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit elsa_cs_probe(struct pcmcia_device *link) { local_info_t *local; @@ -119,31 +88,9 @@ static int __devinit elsa_cs_probe(struct pcmcia_device *link) local->cardnr = -1; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - return elsa_cs_config(link); } /* elsa_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit elsa_cs_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -156,27 +103,17 @@ static void __devexit elsa_cs_detach(struct pcmcia_device *link) kfree(info); } /* elsa_cs_detach */ -/*====================================================================== - - elsa_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int elsa_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int elsa_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 3; + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -199,6 +136,8 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "elsa_config(0x%p)\n", link); dev = link->priv; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, elsa_cs_configcheck, NULL); if (i != 0) goto failed; @@ -206,21 +145,10 @@ static int __devinit elsa_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -240,14 +168,6 @@ failed: return -ENODEV; } /* elsa_cs_config */ -/*====================================================================== - - After a card is removed, elsa_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void elsa_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -291,9 +211,7 @@ MODULE_DEVICE_TABLE(pcmcia, elsa_ids); static struct pcmcia_driver elsa_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "elsa_cs", - }, + .name = "elsa_cs", .probe = elsa_cs_probe, .remove = __devexit_p(elsa_cs_detach), .id_table = elsa_ids, diff --git a/drivers/isdn/hisax/sedlbauer_cs.c b/drivers/isdn/hisax/sedlbauer_cs.c index a024192b672a..360204bc2777 100644 --- a/drivers/isdn/hisax/sedlbauer_cs.c +++ b/drivers/isdn/hisax/sedlbauer_cs.c @@ -46,7 +46,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,26 +63,9 @@ MODULE_LICENSE("Dual MPL/GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the sedlbauer - event handler. -*/ - static int sedlbauer_config(struct pcmcia_device *link) __devinit ; static void sedlbauer_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void sedlbauer_detach(struct pcmcia_device *p_dev) __devexit; typedef struct local_info_t { @@ -92,18 +74,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - sedlbauer_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit sedlbauer_probe(struct pcmcia_device *link) { local_info_t *local; @@ -118,35 +88,9 @@ static int __devinit sedlbauer_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - - /* from old sedl_cs - */ - /* The io structure describes IO port mapping */ - link->resource[0]->end = 8; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return sedlbauer_config(link); } /* sedlbauer_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit sedlbauer_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "sedlbauer_detach(0x%p)\n", link); @@ -158,70 +102,15 @@ static void __devexit sedlbauer_detach(struct pcmcia_device *link) kfree(link->priv); } /* sedlbauer_detach */ -/*====================================================================== - - sedlbauer_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ -static int sedlbauer_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int sedlbauer_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - p_dev->io_lines = 3; - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } - - return 0; + p_dev->io_lines = 3; + return pcmcia_request_io(p_dev); } - - static int __devinit sedlbauer_config(struct pcmcia_device *link) { int ret; @@ -229,44 +118,17 @@ static int __devinit sedlbauer_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sedlbauer_config(0x%p)\n", link); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, sedlbauer_config_check, NULL); if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -290,14 +152,6 @@ failed: } /* sedlbauer_config */ -/*====================================================================== - - After a card is removed, sedlbauer_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void sedlbauer_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -346,9 +200,7 @@ MODULE_DEVICE_TABLE(pcmcia, sedlbauer_ids); static struct pcmcia_driver sedlbauer_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sedlbauer_cs", - }, + .name = "sedlbauer_cs", .probe = sedlbauer_probe, .remove = __devexit_p(sedlbauer_detach), .id_table = sedlbauer_ids, diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c index 7296102ca255..282a4467ef19 100644 --- a/drivers/isdn/hisax/teles_cs.c +++ b/drivers/isdn/hisax/teles_cs.c @@ -27,7 +27,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -45,26 +44,8 @@ MODULE_LICENSE("GPL"); static int protocol = 2; /* EURO-ISDN Default */ module_param(protocol, int, 0); -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card insertion - and ejection events. They are invoked from the teles_cs event - handler. -*/ - static int teles_cs_config(struct pcmcia_device *link) __devinit ; static void teles_cs_release(struct pcmcia_device *link); - -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void teles_detach(struct pcmcia_device *p_dev) __devexit ; typedef struct local_info_t { @@ -73,18 +54,6 @@ typedef struct local_info_t { int cardnr; } local_info_t; -/*====================================================================== - - teles_attach() creates an "instance" of the driver, allocatingx - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int __devinit teles_probe(struct pcmcia_device *link) { local_info_t *local; @@ -99,31 +68,11 @@ static int __devinit teles_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->resource[0]->end = 96; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return teles_cs_config(link); } /* teles_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void __devexit teles_detach(struct pcmcia_device *link) { local_info_t *info = link->priv; @@ -136,27 +85,17 @@ static void __devexit teles_detach(struct pcmcia_device *link) kfree(info); } /* teles_detach */ -/*====================================================================== - - teles_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - -static int teles_cs_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int teles_cs_configcheck(struct pcmcia_device *p_dev, void *priv_data) { int j; p_dev->io_lines = 5; + p_dev->resource[0]->end = 96; + p_dev->resource[0]->flags &= IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - if ((cf->io.nwin > 0) && cf->io.win[0].base) { + if ((p_dev->resource[0]->end) && p_dev->resource[0]->start) { printk(KERN_INFO "(teles_cs: looks like the 96 model)\n"); - p_dev->resource[0]->start = cf->io.win[0].base; if (!pcmcia_request_io(p_dev)) return 0; } else { @@ -186,21 +125,10 @@ static int __devinit teles_cs_config(struct pcmcia_device *link) if (!link->irq) goto cs_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) goto cs_failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x:", - link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - icard.para[0] = link->irq; icard.para[1] = link->resource[0]->start; icard.protocol = protocol; @@ -222,14 +150,6 @@ cs_failed: return -ENODEV; } /* teles_cs_config */ -/*====================================================================== - - After a card is removed, teles_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void teles_cs_release(struct pcmcia_device *link) { local_info_t *local = link->priv; @@ -273,9 +193,7 @@ MODULE_DEVICE_TABLE(pcmcia, teles_ids); static struct pcmcia_driver teles_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "teles_cs", - }, + .name = "teles_cs", .probe = teles_probe, .remove = __devexit_p(teles_detach), .id_table = teles_ids, diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c index 7aa65bb2af4a..f472c2714eb8 100644 --- a/drivers/mmc/host/sdricoh_cs.c +++ b/drivers/mmc/host/sdricoh_cs.c @@ -30,7 +30,6 @@ #include <linux/ioport.h> #include <linux/scatterlist.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <linux/io.h> @@ -536,9 +535,7 @@ static int sdricoh_pcmcia_resume(struct pcmcia_device *link) #endif static struct pcmcia_driver sdricoh_driver = { - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = sdricoh_pcmcia_probe, .remove = sdricoh_pcmcia_detach, .id_table = pcmcia_ids, diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c index e9ca5ba7d9d2..57a1acfe22c4 100644 --- a/drivers/mtd/maps/pcmciamtd.c +++ b/drivers/mtd/maps/pcmciamtd.c @@ -16,7 +16,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -101,7 +100,7 @@ MODULE_PARM_DESC(mem_type, "Set Memory type (0=Flash, 1=RAM, 2=ROM, default=0)") static caddr_t remap_window(struct map_info *map, unsigned long to) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; - window_handle_t win = (window_handle_t)map->map_priv_2; + struct resource *win = (struct resource *) map->map_priv_2; unsigned int offset; int ret; @@ -316,30 +315,19 @@ static void pcmciamtd_set_vpp(struct map_info *map, int on) { struct pcmciamtd_dev *dev = (struct pcmciamtd_dev *)map->map_priv_1; struct pcmcia_device *link = dev->p_dev; - modconf_t mod; - int ret; - - mod.Attributes = CONF_VPP1_CHANGE_VALID | CONF_VPP2_CHANGE_VALID; - mod.Vcc = 0; - mod.Vpp1 = mod.Vpp2 = on ? dev->vpp : 0; DEBUG(2, "dev = %p on = %d vpp = %d\n", dev, on, dev->vpp); - ret = pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_vpp(link, on ? dev->vpp : 0); } -/* After a card is removed, pcmciamtd_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ - static void pcmciamtd_release(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; DEBUG(3, "link = 0x%p", link); - if (link->win) { + if (link->resource[2]->end) { if(dev->win_base) { iounmap(dev->win_base); dev->win_base = NULL; @@ -482,18 +470,12 @@ static void card_settings(struct pcmciamtd_dev *dev, struct pcmcia_device *p_dev } -/* pcmciamtd_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * MTD device available to the system. - */ - static int pcmciamtd_config(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; struct mtd_info *mtd = NULL; - win_req_t req; int ret; - int i; + int i, j = 0; static char *probes[] = { "jedec_probe", "cfi_probe" }; int new_name = 0; @@ -520,28 +502,34 @@ static int pcmciamtd_config(struct pcmcia_device *link) * smaller windows until we succeed */ - req.Attributes = WIN_MEMORY_TYPE_CM | WIN_ENABLE; - req.Attributes |= (dev->pcmcia_map.bankwidth == 1) ? WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; - req.Base = 0; - req.AccessSpeed = mem_speed; - link->win = (window_handle_t)link; - req.Size = (force_size) ? force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->flags |= WIN_MEMORY_TYPE_CM | WIN_ENABLE; + link->resource[2]->flags |= (dev->pcmcia_map.bankwidth == 1) ? + WIN_DATA_WIDTH_8 : WIN_DATA_WIDTH_16; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? force_size << 20 : + MAX_PCMCIA_ADDR; dev->win_size = 0; do { int ret; - DEBUG(2, "requesting window with size = %dKiB memspeed = %d", - req.Size >> 10, req.AccessSpeed); - ret = pcmcia_request_window(link, &req, &link->win); + DEBUG(2, "requesting window with size = %luKiB memspeed = %d", + (unsigned long) resource_size(link->resource[2]) >> 10, + mem_speed); + ret = pcmcia_request_window(link, link->resource[2], mem_speed); DEBUG(2, "ret = %d dev->win_size = %d", ret, dev->win_size); if(ret) { - req.Size >>= 1; + j++; + link->resource[2]->start = 0; + link->resource[2]->end = (force_size) ? + force_size << 20 : MAX_PCMCIA_ADDR; + link->resource[2]->end >>= j; } else { - DEBUG(2, "Got window of size %dKiB", req.Size >> 10); - dev->win_size = req.Size; + DEBUG(2, "Got window of size %luKiB", (unsigned long) + resource_size(link->resource[2]) >> 10); + dev->win_size = resource_size(link->resource[2]); break; } - } while(req.Size >= 0x1000); + } while (link->resource[2]->end >= 0x1000); DEBUG(2, "dev->win_size = %d", dev->win_size); @@ -553,33 +541,31 @@ static int pcmciamtd_config(struct pcmcia_device *link) DEBUG(1, "Allocated a window of %dKiB", dev->win_size >> 10); /* Get write protect status */ - DEBUG(2, "window handle = 0x%8.8lx", (unsigned long)link->win); - dev->win_base = ioremap(req.Base, req.Size); + dev->win_base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); if(!dev->win_base) { - dev_err(&dev->p_dev->dev, "ioremap(%lu, %u) failed\n", - req.Base, req.Size); + dev_err(&dev->p_dev->dev, "ioremap(%pR) failed\n", + link->resource[2]); pcmciamtd_release(link); return -ENODEV; } - DEBUG(1, "mapped window dev = %p req.base = 0x%lx base = %p size = 0x%x", - dev, req.Base, dev->win_base, req.Size); + DEBUG(1, "mapped window dev = %p @ %pR, base = %p", + dev, link->resource[2], dev->win_base); dev->offset = 0; dev->pcmcia_map.map_priv_1 = (unsigned long)dev; - dev->pcmcia_map.map_priv_2 = (unsigned long)link->win; + dev->pcmcia_map.map_priv_2 = (unsigned long)link->resource[2]; dev->vpp = (vpp) ? vpp : link->socket->socket.Vpp; - link->conf.Attributes = 0; if(setvpp == 2) { - link->conf.Vpp = dev->vpp; + link->vpp = dev->vpp; } else { - link->conf.Vpp = 0; + link->vpp = 0; } - link->conf.IntType = INT_MEMORY; - link->conf.ConfigIndex = 0; + link->config_index = 0; DEBUG(2, "Setting Configuration"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) { if (dev->win_base) { iounmap(dev->win_base); @@ -680,12 +666,6 @@ static int pcmciamtd_resume(struct pcmcia_device *dev) } -/* This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void pcmciamtd_detach(struct pcmcia_device *link) { struct pcmciamtd_dev *dev = link->priv; @@ -703,11 +683,6 @@ static void pcmciamtd_detach(struct pcmcia_device *link) } -/* pcmciamtd_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - */ - static int pcmciamtd_probe(struct pcmcia_device *link) { struct pcmciamtd_dev *dev; @@ -720,9 +695,6 @@ static int pcmciamtd_probe(struct pcmcia_device *link) dev->p_dev = link; link->priv = dev; - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY; - return pcmciamtd_config(link); } @@ -757,9 +729,7 @@ static struct pcmcia_device_id pcmciamtd_ids[] = { MODULE_DEVICE_TABLE(pcmcia, pcmciamtd_ids); static struct pcmcia_driver pcmciamtd_driver = { - .drv = { - .name = "pcmciamtd" - }, + .name = "pcmciamtd", .probe = pcmciamtd_probe, .remove = pcmciamtd_detach, .owner = THIS_MODULE, @@ -771,8 +741,6 @@ static struct pcmcia_driver pcmciamtd_driver = { static int __init init_pcmciamtd(void) { - info(DRIVER_DESC); - if(bankwidth && bankwidth != 1 && bankwidth != 2) { info("bad bankwidth (%d), using default", bankwidth); bankwidth = 2; diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index c683f77c6f42..ff824e11f0b6 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -87,7 +87,6 @@ earlier 3Com products. #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -280,25 +279,15 @@ static int tc574_probe(struct pcmcia_device *link) spin_lock_init(&lp->window_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); dev->watchdog_timeo = TX_TIMEOUT; return tc574_config(link); -} /* tc574_attach */ - -/* - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -*/ +} static void tc574_detach(struct pcmcia_device *link) { @@ -313,12 +302,6 @@ static void tc574_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc574_detach */ -/* - tc574_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -*/ - static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; static int tc574_config(struct pcmcia_device *link) @@ -352,7 +335,7 @@ static int tc574_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -465,12 +448,6 @@ failed: } /* tc574_config */ -/* - After a card is removed, tc574_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -*/ - static void tc574_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -1198,9 +1175,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc574_ids); static struct pcmcia_driver tc574_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c574_cs", - }, + .name = "3c574_cs", .probe = tc574_probe, .remove = tc574_detach, .id_table = tc574_ids, diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 61f9cf2100ff..a07e22295330 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -41,7 +41,6 @@ #include <linux/bitops.h> #include <linux/jiffies.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -176,14 +175,6 @@ static const struct ethtool_ops netdev_ethtool_ops; static void tc589_detach(struct pcmcia_device *p_dev); -/*====================================================================== - - tc589_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static const struct net_device_ops el3_netdev_ops = { .ndo_open = el3_open, .ndo_stop = el3_close, @@ -216,9 +207,8 @@ static int tc589_probe(struct pcmcia_device *link) link->resource[0]->end = 16; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; dev->netdev_ops = &el3_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -226,16 +216,7 @@ static int tc589_probe(struct pcmcia_device *link) SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops); return tc589_config(link); -} /* tc589_attach */ - -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ +} static void tc589_detach(struct pcmcia_device *link) { @@ -250,14 +231,6 @@ static void tc589_detach(struct pcmcia_device *link) free_netdev(dev); } /* tc589_detach */ -/*====================================================================== - - tc589_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -294,7 +267,7 @@ static int tc589_config(struct pcmcia_device *link) if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -352,14 +325,6 @@ failed: return -ENODEV; } /* tc589_config */ -/*====================================================================== - - After a card is removed, tc589_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void tc589_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -955,9 +920,7 @@ MODULE_DEVICE_TABLE(pcmcia, tc589_ids); static struct pcmcia_driver tc589_driver = { .owner = THIS_MODULE, - .drv = { - .name = "3c589_cs", - }, + .name = "3c589_cs", .probe = tc589_probe, .remove = tc589_detach, .id_table = tc589_ids, diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index 5f05ffb240cc..9e8b28b271ae 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -39,7 +39,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -140,14 +139,6 @@ static const struct net_device_ops axnet_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - axnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int axnet_probe(struct pcmcia_device *link) { axnet_dev_t *info; @@ -166,8 +157,7 @@ static int axnet_probe(struct pcmcia_device *link) info = PRIV(dev); info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &axnet_netdev_ops; @@ -177,15 +167,6 @@ static int axnet_probe(struct pcmcia_device *link) return axnet_config(link); } /* axnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void axnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -231,7 +212,7 @@ static int get_prom(struct pcmcia_device *link) }; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return 0; axnet_reset_8390(dev); @@ -248,14 +229,6 @@ static int get_prom(struct pcmcia_device *link) return 1; } /* get_prom */ -/*====================================================================== - - axnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -286,35 +259,16 @@ static int try_io_port(struct pcmcia_device *link) } } -static int axnet_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int axnet_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - int i; - cistpl_io_t *io = &cfg->io; + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->index == 0 || cfg->io.nwin == 0) + p_dev->config_index = 0x05; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) return -ENODEV; - p_dev->conf.ConfigIndex = 0x05; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -ENODEV; + return try_io_port(p_dev); } static int axnet_config(struct pcmcia_device *link) @@ -326,20 +280,19 @@ static int axnet_config(struct pcmcia_device *link) dev_dbg(&link->dev, "axnet_config(0x%p)\n", link); /* don't trust the CIS on this; Linksys got it wrong */ - link->conf.Present = 0x63; + link->config_regs = 0x63; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, axnet_configcheck, NULL); if (ret != 0) goto failed; if (!link->irq) goto failed; + + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -414,14 +367,6 @@ failed: return -ENODEV; } /* axnet_config */ -/*====================================================================== - - After a card is removed, axnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void axnet_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -783,9 +728,7 @@ MODULE_DEVICE_TABLE(pcmcia, axnet_ids); static struct pcmcia_driver axnet_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "axnet_cs", - }, + .name = "axnet_cs", .probe = axnet_probe, .remove = axnet_detach, .id_table = axnet_ids, diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c index 3c400cfa82ae..b706a7249477 100644 --- a/drivers/net/pcmcia/com20020_cs.c +++ b/drivers/net/pcmcia/com20020_cs.c @@ -43,7 +43,6 @@ #include <linux/arcdevice.h> #include <linux/com20020.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -123,14 +122,6 @@ typedef struct com20020_dev_t { struct net_device *dev; } com20020_dev_t; -/*====================================================================== - - com20020_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int com20020_probe(struct pcmcia_device *p_dev) { com20020_dev_t *info; @@ -160,8 +151,7 @@ static int com20020_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; p_dev->resource[0]->end = 16; - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ; info->dev = dev; p_dev->priv = info; @@ -174,15 +164,6 @@ fail_alloc_info: return -ENOMEM; } /* com20020_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void com20020_detach(struct pcmcia_device *link) { struct com20020_dev_t *info = link->priv; @@ -221,14 +202,6 @@ static void com20020_detach(struct pcmcia_device *link) } /* com20020_detach */ -/*====================================================================== - - com20020_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int com20020_config(struct pcmcia_device *link) { struct arcnet_local *lp; @@ -282,7 +255,7 @@ static int com20020_config(struct pcmcia_device *link) dev->irq = link->irq; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -316,14 +289,6 @@ failed: return -ENODEV; } /* com20020_config */ -/*====================================================================== - - After a card is removed, com20020_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void com20020_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "com20020_release\n"); @@ -366,9 +331,7 @@ MODULE_DEVICE_TABLE(pcmcia, com20020_ids); static struct pcmcia_driver com20020_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "com20020_cs", - }, + .name = "com20020_cs", .probe = com20020_probe, .remove = com20020_detach, .id_table = com20020_ids, diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 98fffb03ecd7..1c327598bbe8 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -49,7 +49,6 @@ #include <linux/ioport.h> #include <linux/crc32.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -252,8 +251,7 @@ static int fmvj18x_probe(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; dev->netdev_ops = &fjn_netdev_ops; dev->watchdog_timeo = TX_TIMEOUT; @@ -313,7 +311,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) ret = pcmcia_request_io(link); if (ret == 0) { /* calculate ConfigIndex value */ - link->conf.ConfigIndex = + link->config_index = ((link->resource[0]->start & 0x0f0) >> 3) | 0x22; return ret; } @@ -321,11 +319,7 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } -static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { return 0; /* strange, but that's what the code did already before... */ } @@ -362,28 +356,28 @@ static int fmvj18x_config(struct pcmcia_device *link) link->card_id == PRODID_TDK_NP9610 || link->card_id == PRODID_TDK_MN3200) { /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; } break; case MANFID_NEC: cardtype = NEC; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_KME: cardtype = KME; /* MultiFunction Card */ - link->conf.ConfigBase = 0x800; - link->conf.ConfigIndex = 0x47; + link->config_base = 0x800; + link->config_index = 0x47; link->resource[1]->end = 8; break; case MANFID_CONTEC: cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->conf.ConfigBase == 0x0fe0) + if (link->config_base == 0x0fe0) cardtype = MBH10302; else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), @@ -403,10 +397,10 @@ static int fmvj18x_config(struct pcmcia_device *link) case MANFID_FUJITSU: if (link->card_id == PRODID_FUJITSU_MBH10304) { cardtype = XXX10304; /* MBH10304 with buggy CIS */ - link->conf.ConfigIndex = 0x20; + link->config_index = 0x20; } else { cardtype = MBH10302; /* NextCom NC5310, etc. */ - link->conf.ConfigIndex = 1; + link->config_index = 1; } break; case MANFID_UNGERMANN: @@ -414,7 +408,7 @@ static int fmvj18x_config(struct pcmcia_device *link) break; default: cardtype = MBH10302; - link->conf.ConfigIndex = 1; + link->config_index = 1; } } @@ -432,7 +426,7 @@ static int fmvj18x_config(struct pcmcia_device *link) ret = pcmcia_request_irq(link, fjn_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -544,20 +538,18 @@ failed: static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) { - win_req_t req; u_char __iomem *base; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -1; - base = ioremap(req.Base, req.Size); - pcmcia_map_mem_page(link, link->win, 0); + base = ioremap(link->resource[2]->start, resource_size(link->resource[2])); + pcmcia_map_mem_page(link, link->resource[2], 0); /* * MBH10304 CISTPL_FUNCE_LAN_NODE_ID format @@ -582,7 +574,7 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) } iounmap(base); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i != 0x200) ? 0 : -1; } /* fmvj18x_get_hwinfo */ @@ -590,27 +582,26 @@ static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id) static int fmvj18x_setup_mfc(struct pcmcia_device *link) { - win_req_t req; int i; struct net_device *dev = link->priv; unsigned int ioaddr; local_info_t *lp = netdev_priv(dev); /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[3]->start = link->resource[3]->end = 0; + i = pcmcia_request_window(link, link->resource[3], 0); if (i != 0) return -1; - lp->base = ioremap(req.Base, req.Size); + lp->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); if (lp->base == NULL) { printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n"); return -1; } - i = pcmcia_map_mem_page(link, link->win, 0); + i = pcmcia_map_mem_page(link, link->resource[3], 0); if (i != 0) { iounmap(lp->base); lp->base = NULL; @@ -638,7 +629,6 @@ static void fmvj18x_release(struct pcmcia_device *link) struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); u_char __iomem *tmp; - int j; dev_dbg(&link->dev, "fmvj18x_release\n"); @@ -646,7 +636,6 @@ static void fmvj18x_release(struct pcmcia_device *link) tmp = lp->base; lp->base = NULL; /* set NULL before iounmap */ iounmap(tmp); - j = pcmcia_release_window(link, link->win); } pcmcia_disable_device(link); @@ -708,9 +697,7 @@ MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids); static struct pcmcia_driver fmvj18x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fmvj18x_cs", - }, + .name = "fmvj18x_cs", .probe = fmvj18x_probe, .remove = fmvj18x_detach, .id_table = fmvj18x_ids, diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c index b0d06a3d962f..bf7dff96d881 100644 --- a/drivers/net/pcmcia/ibmtr_cs.c +++ b/drivers/net/pcmcia/ibmtr_cs.c @@ -57,7 +57,6 @@ #include <linux/trdevice.h> #include <linux/ibmtr.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -102,9 +101,8 @@ static void ibmtr_detach(struct pcmcia_device *p_dev); typedef struct ibmtr_dev_t { struct pcmcia_device *p_dev; - struct net_device *dev; - window_handle_t sram_win_handle; - struct tok_info *ti; + struct net_device *dev; + struct tok_info *ti; } ibmtr_dev_t; static void netdev_get_drvinfo(struct net_device *dev, @@ -123,14 +121,6 @@ static irqreturn_t ibmtr_interrupt(int irq, void *dev_id) { return tok_interrupt(irq, dev); }; -/*====================================================================== - - ibmtr_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int __devinit ibmtr_attach(struct pcmcia_device *link) { ibmtr_dev_t *info; @@ -153,9 +143,8 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[0]->end = 4; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_regs = PRESENT_OPTION; info->dev = dev; @@ -164,15 +153,6 @@ static int __devinit ibmtr_attach(struct pcmcia_device *link) return ibmtr_config(link); } /* ibmtr_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void ibmtr_detach(struct pcmcia_device *link) { struct ibmtr_dev_t *info = link->priv; @@ -197,26 +177,17 @@ static void ibmtr_detach(struct pcmcia_device *link) kfree(info); } /* ibmtr_detach */ -/*====================================================================== - - ibmtr_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - token-ring device available to the system. - -======================================================================*/ - static int __devinit ibmtr_config(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; struct net_device *dev = info->dev; struct tok_info *ti = netdev_priv(dev); - win_req_t req; int i, ret; dev_dbg(&link->dev, "ibmtr_config\n"); - link->conf.ConfigIndex = 0x61; link->io_lines = 16; + link->config_index = 0x61; /* Determine if this is PRIMARY or ALTERNATE. */ @@ -240,39 +211,39 @@ static int __devinit ibmtr_config(struct pcmcia_device *link) ti->global_int_enable=GLOBAL_INT_ENABLE+((dev->irq==9) ? 2 : dev->irq); /* Allocate the MMIO memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x2000; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[2]->flags |= WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x2000; + ret = pcmcia_request_window(link, link->resource[2], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, mmiobase); + ret = pcmcia_map_mem_page(link, link->resource[2], mmiobase); if (ret) goto failed; - ti->mmio = ioremap(req.Base, req.Size); + ti->mmio = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /* Allocate the SRAM memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; - req.Size = sramsize * 1024; - req.AccessSpeed = 250; - ret = pcmcia_request_window(link, &req, &info->sram_win_handle); + link->resource[3]->flags = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; + link->resource[3]->end = sramsize * 1024; + ret = pcmcia_request_window(link, link->resource[3], 250); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, info->sram_win_handle, srambase); + ret = pcmcia_map_mem_page(link, link->resource[3], srambase); if (ret) goto failed; ti->sram_base = srambase >> 12; - ti->sram_virt = ioremap(req.Base, req.Size); - ti->sram_phys = req.Base; + ti->sram_virt = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); + ti->sram_phys = link->resource[3]->start; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -301,14 +272,6 @@ failed: return -ENODEV; } /* ibmtr_config */ -/*====================================================================== - - After a card is removed, ibmtr_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void ibmtr_release(struct pcmcia_device *link) { ibmtr_dev_t *info = link->priv; @@ -316,7 +279,7 @@ static void ibmtr_release(struct pcmcia_device *link) dev_dbg(&link->dev, "ibmtr_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct tok_info *ti = netdev_priv(dev); iounmap(ti->mmio); } @@ -398,9 +361,7 @@ MODULE_DEVICE_TABLE(pcmcia, ibmtr_ids); static struct pcmcia_driver ibmtr_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ibmtr_cs", - }, + .name = "ibmtr_cs", .probe = ibmtr_attach, .remove = ibmtr_detach, .id_table = ibmtr_ids, diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 68f2deeb3ade..1eca4f5a6e78 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -146,7 +146,6 @@ Include Files #include <linux/ioport.h> #include <linux/bitops.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -435,13 +434,6 @@ static const struct net_device_ops mace_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/* ---------------------------------------------------------------------------- -nmclan_attach - Creates an "instance" of the driver, allocating local data - structures for one device. The device is registered with Card - Services. ----------------------------------------------------------------------------- */ - static int nmclan_probe(struct pcmcia_device *link) { mace_private *lp; @@ -460,10 +452,9 @@ static int nmclan_probe(struct pcmcia_device *link) spin_lock_init(&lp->bank_lock); link->resource[0]->end = 32; link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 1; + link->config_regs = PRESENT_OPTION; lp->tx_free_frames=AM2150_MAX_TX_FRAMES; @@ -474,14 +465,6 @@ static int nmclan_probe(struct pcmcia_device *link) return nmclan_config(link); } /* nmclan_attach */ -/* ---------------------------------------------------------------------------- -nmclan_detach - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. ----------------------------------------------------------------------------- */ - static void nmclan_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -625,13 +608,6 @@ static int mace_init(mace_private *lp, unsigned int ioaddr, char *enet_addr) return 0; } /* mace_init */ -/* ---------------------------------------------------------------------------- -nmclan_config - This routine is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. ----------------------------------------------------------------------------- */ - static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -650,7 +626,7 @@ static int nmclan_config(struct pcmcia_device *link) ret = pcmcia_request_exclusive_irq(link, mace_interrupt); if (ret) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -712,12 +688,6 @@ failed: return -ENODEV; } /* nmclan_config */ -/* ---------------------------------------------------------------------------- -nmclan_release - After a card is removed, nmclan_release() will unregister the - net device, and release the PCMCIA configuration. If the device - is still open, this will be postponed until it is closed. ----------------------------------------------------------------------------- */ static void nmclan_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "nmclan_release\n"); @@ -1535,9 +1505,7 @@ MODULE_DEVICE_TABLE(pcmcia, nmclan_ids); static struct pcmcia_driver nmclan_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nmclan_cs", - }, + .name = "nmclan_cs", .probe = nmclan_probe, .remove = nmclan_detach, .id_table = nmclan_ids, diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index f9b509a6b09a..5d7d1d3088ae 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -42,7 +42,6 @@ #include <linux/mii.h> #include "../8390.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -238,14 +237,6 @@ static const struct net_device_ops pcnet_netdev_ops = { #endif }; -/*====================================================================== - - pcnet_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int pcnet_probe(struct pcmcia_device *link) { pcnet_dev_t *info; @@ -260,23 +251,13 @@ static int pcnet_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = dev; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; dev->netdev_ops = &pcnet_netdev_ops; return pcnet_config(link); } /* pcnet_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void pcnet_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -300,22 +281,22 @@ static void pcnet_detach(struct pcmcia_device *link) static hw_info_t *get_hwinfo(struct pcmcia_device *link) { struct net_device *dev = link->priv; - win_req_t req; u_char __iomem *base, *virt; int i, j; /* Allocate a small memory window */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = 0; req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = 0; link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return NULL; - virt = ioremap(req.Base, req.Size); + virt = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); for (i = 0; i < NR_INFO; i++) { - pcmcia_map_mem_page(link, link->win, hw_info[i].offset & ~(req.Size-1)); - base = &virt[hw_info[i].offset & (req.Size-1)]; + pcmcia_map_mem_page(link, link->resource[2], + hw_info[i].offset & ~(resource_size(link->resource[2])-1)); + base = &virt[hw_info[i].offset & (resource_size(link->resource[2])-1)]; if ((readb(base+0) == hw_info[i].a0) && (readb(base+2) == hw_info[i].a1) && (readb(base+4) == hw_info[i].a2)) { @@ -326,7 +307,7 @@ static hw_info_t *get_hwinfo(struct pcmcia_device *link) } iounmap(virt); - j = pcmcia_release_window(link, link->win); + j = pcmcia_release_window(link, link->resource[2]); return (i < NR_INFO) ? hw_info+i : NULL; } /* get_hwinfo */ @@ -421,7 +402,7 @@ static hw_info_t *get_ax88190(struct pcmcia_device *link) int i, j; /* Not much of a test, but the alternatives are messy */ - if (link->conf.ConfigBase != 0x03c0) + if (link->config_base != 0x03c0) return NULL; outb_p(0x01, ioaddr + EN0_DCFG); /* Set word-wide access. */ @@ -463,14 +444,6 @@ static hw_info_t *get_hwired(struct pcmcia_device *link) return &default_info; } /* get_hwired */ -/*====================================================================== - - pcnet_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int try_io_port(struct pcmcia_device *link) { int j, ret; @@ -502,43 +475,22 @@ static int try_io_port(struct pcmcia_device *link) } } -static int pcnet_confcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int pcnet_confcheck(struct pcmcia_device *p_dev, void *priv_data) { int *priv = priv_data; int try = (*priv & 0x1); - int i; - cistpl_io_t *io = &cfg->io; - if (cfg->index == 0 || cfg->io.nwin == 0) - return -EINVAL; + *priv &= (p_dev->resource[2]->end >= 0x4000) ? 0x10 : ~0x10; - /* For multifunction cards, by convention, we configure the - network function with window 0, and serial with window 1 */ - if (io->nwin > 1) { - i = (io->win[1].len > io->win[0].len); - p_dev->resource[1]->start = io->win[1-i].base; - p_dev->resource[1]->end = io->win[1-i].len; - } else { - i = p_dev->resource[1]->end = 0; - } + if (p_dev->config_index == 0) + return -EINVAL; - *priv &= ((cfg->mem.nwin == 1) && - (cfg->mem.win[0].len >= 0x4000)) ? 0x10 : ~0x10; + if (p_dev->resource[0]->end + p_dev->resource[1]->end < 32) + return -EINVAL; - p_dev->resource[0]->start = io->win[i].base; - p_dev->resource[0]->end = io->win[i].len; - if (!try) - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - else + if (try) p_dev->io_lines = 16; - if (p_dev->resource[0]->end + p_dev->resource[1]->end >= 32) - return try_io_port(p_dev); - - return -EINVAL; + return try_io_port(p_dev); } static hw_info_t *pcnet_try_config(struct pcmcia_device *link, @@ -560,15 +512,14 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, if (!link->irq) return NULL; - if (resource_size(link->resource[1]) == 8) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } + if (resource_size(link->resource[1]) == 8) + link->config_flags |= CONF_ENABLE_SPKR; + if ((link->manf_id == MANFID_IBM) && (link->card_id == PRODID_IBM_HOME_AND_AWAY)) - link->conf.ConfigIndex |= 0x10; + link->config_index |= 0x10; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) return NULL; @@ -583,7 +534,7 @@ static hw_info_t *pcnet_try_config(struct pcmcia_device *link, } else dev->if_port = 0; - if ((link->conf.ConfigBase == 0x03c0) && + if ((link->config_base == 0x03c0) && (link->manf_id == 0x149) && (link->card_id == 0xc1ab)) { dev_info(&link->dev, "this is an AX88190 card - use axnet_cs instead.\n"); @@ -689,14 +640,6 @@ failed: return -ENODEV; } /* pcnet_config */ -/*====================================================================== - - After a card is removed, pcnet_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void pcnet_release(struct pcmcia_device *link) { pcnet_dev_t *info = PRIV(link->priv); @@ -709,15 +652,6 @@ static void pcnet_release(struct pcmcia_device *link) pcmcia_disable_device(link); } -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. A CARD_REMOVAL event - also sets some flags to discourage the net drivers from trying - to talk to the card any more. - -======================================================================*/ - static int pcnet_suspend(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1486,7 +1420,6 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, { struct net_device *dev = link->priv; pcnet_dev_t *info = PRIV(dev); - win_req_t req; int i, window_size, offset, ret; window_size = (stop_pg - start_pg) << 8; @@ -1497,22 +1430,22 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, window_size = roundup_pow_of_two(window_size); /* Allocate a memory window */ - req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; - req.Attributes |= WIN_USE_WAIT; - req.Base = 0; req.Size = window_size; - req.AccessSpeed = mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[3]->flags |= WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM|WIN_ENABLE; + link->resource[3]->flags |= WIN_USE_WAIT; + link->resource[3]->start = 0; link->resource[3]->end = window_size; + ret = pcmcia_request_window(link, link->resource[3], mem_speed); if (ret) goto failed; offset = (start_pg << 8) + cm_offset; offset -= offset % window_size; - ret = pcmcia_map_mem_page(link, link->win, offset); + ret = pcmcia_map_mem_page(link, link->resource[3], offset); if (ret) goto failed; /* Try scribbling on the buffer */ - info->base = ioremap(req.Base, window_size); + info->base = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); for (i = 0; i < (TX_PAGES<<8); i += 2) __raw_writew((i>>1), info->base+offset+i); udelay(100); @@ -1521,19 +1454,20 @@ static int setup_shmem_window(struct pcmcia_device *link, int start_pg, pcnet_reset_8390(dev); if (i != (TX_PAGES<<8)) { iounmap(info->base); - pcmcia_release_window(link, link->win); - info->base = NULL; link->win = 0; + pcmcia_release_window(link, link->resource[3]); + info->base = NULL; goto failed; } ei_status.mem = info->base + offset; - ei_status.priv = req.Size; + ei_status.priv = resource_size(link->resource[3]); dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = dev->mem_start + req.Size; + dev->mem_end = dev->mem_start + resource_size(link->resource[3]); ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; - ei_status.stop_page = start_pg + ((req.Size - offset) >> 8); + ei_status.stop_page = start_pg + ( + (resource_size(link->resource[3]) - offset) >> 8); /* set up block i/o functions */ ei_status.get_8390_hdr = &shmem_get_8390_hdr; @@ -1772,9 +1706,7 @@ MODULE_FIRMWARE("cis/PE-200.cis"); MODULE_FIRMWARE("cis/tamarack.cis"); static struct pcmcia_driver pcnet_driver = { - .drv = { - .name = "pcnet_cs", - }, + .name = "pcnet_cs", .probe = pcnet_probe, .remove = pcnet_detach, .owner = THIS_MODULE, diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 377367d03b41..0af2fc8ec164 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -44,7 +44,6 @@ #include <linux/jiffies.h> #include <linux/firmware.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -300,14 +299,6 @@ static const struct net_device_ops smc_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*====================================================================== - - smc91c92_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int smc91c92_probe(struct pcmcia_device *link) { struct smc_private *smc; @@ -324,10 +315,6 @@ static int smc91c92_probe(struct pcmcia_device *link) link->priv = dev; spin_lock_init(&smc->lock); - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; /* The SMC91c92-specific entries in the device structure. */ dev->netdev_ops = &smc_netdev_ops; @@ -343,15 +330,6 @@ static int smc91c92_probe(struct pcmcia_device *link) return smc91c92_config(link); } /* smc91c92_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void smc91c92_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -412,26 +390,28 @@ static int mhz_3288_power(struct pcmcia_device *link) mdelay(200); /* Now read and write the COR... */ - tmp = readb(smc->base + link->conf.ConfigBase + CISREG_COR); + tmp = readb(smc->base + link->config_base + CISREG_COR); udelay(5); - writeb(tmp, smc->base + link->conf.ConfigBase + CISREG_COR); + writeb(tmp, smc->base + link->config_base + CISREG_COR); return 0; } -static int mhz_mfc_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) { int k; - p_dev->resource[1]->start = cf->io.win[0].base; + p_dev->io_lines = 16; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[1]->end = 8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; for (k = 0; k < 0x400; k += 0x10) { if (k & 0x80) continue; p_dev->resource[0]->start = k ^ 0x300; - p_dev->io_lines = 16; if (!pcmcia_request_io(p_dev)) return 0; } @@ -442,14 +422,11 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - win_req_t req; unsigned int offset; int i; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->end = 8; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | + CONF_AUTO_SET_IO; /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ @@ -459,16 +436,16 @@ static int mhz_mfc_config(struct pcmcia_device *link) dev->base_addr = link->resource[0]->start; /* Allocate a memory window, for accessing the ISR */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - i = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + i = pcmcia_request_window(link, link->resource[2], 0); if (i != 0) return -ENODEV; - smc->base = ioremap(req.Base, req.Size); - offset = (smc->manfid == MANFID_MOTOROLA) ? link->conf.ConfigBase : 0; - i = pcmcia_map_mem_page(link, link->win, offset); + smc->base = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); + offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; + i = pcmcia_map_mem_page(link, link->resource[2], offset); if ((i == 0) && (smc->manfid == MANFID_MEGAHERTZ) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) @@ -591,14 +568,12 @@ static int mot_setup(struct pcmcia_device *link) /*====================================================================*/ -static int smc_configcheck(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->end = 16; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + return pcmcia_request_io(p_dev); } @@ -607,7 +582,8 @@ static int smc_config(struct pcmcia_device *link) struct net_device *dev = link->priv; int i; - link->resource[0]->end = 16; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + i = pcmcia_loop_config(link, smc_configcheck, NULL); if (!i) dev->base_addr = link->resource[0]->start; @@ -640,15 +616,14 @@ static int osi_config(struct pcmcia_device *link) static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; int i, j; - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; + link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; link->resource[0]->end = 64; link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; link->resource[1]->end = 8; /* Enable Hard Decode, LAN, Modem */ - link->conf.ConfigIndex = 0x23; link->io_lines = 16; + link->config_index = 0x23; for (i = j = 0; j < 4; j++) { link->resource[1]->start = com[j]; @@ -658,7 +633,7 @@ static int osi_config(struct pcmcia_device *link) } if (i != 0) { /* Fallback: turn off hard decode */ - link->conf.ConfigIndex = 0x03; + link->config_index = 0x03; link->resource[1]->end = 0; i = pcmcia_request_io(link); } @@ -817,27 +792,16 @@ static int check_sig(struct pcmcia_device *link) } if (width) { - modconf_t mod = { - .Attributes = CONF_IO_CHANGE_WIDTH, - }; printk(KERN_INFO "smc91c92_cs: using 8-bit IO window.\n"); smc91c92_suspend(link); - pcmcia_modify_configuration(link, &mod); + pcmcia_fixup_iowidth(link); smc91c92_resume(link); return check_sig(link); } return -ENODEV; } -/*====================================================================== - - smc91c92_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. - -======================================================================*/ - static int smc91c92_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -869,7 +833,7 @@ static int smc91c92_config(struct pcmcia_device *link) i = pcmcia_request_irq(link, smc_interrupt); if (i) goto config_failed; - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i) goto config_failed; @@ -988,18 +952,10 @@ config_failed: return -ENODEV; } /* smc91c92_config */ -/*====================================================================== - - After a card is removed, smc91c92_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void smc91c92_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "smc91c92_release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); iounmap(smc->base); @@ -2101,9 +2057,7 @@ MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); static struct pcmcia_driver smc91c92_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "smc91c92_cs", - }, + .name = "smc91c92_cs", .probe = smc91c92_probe, .remove = smc91c92_detach, .id_table = smc91c92_ids, diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index f5819526b5ee..1fece617c069 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -82,7 +82,6 @@ #include <linux/bitops.h> #include <linux/mii.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -267,33 +266,11 @@ static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg); static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data, int len); -/* - * The event() function is this driver's Card Services event handler. - * It will be called by Card Services when an appropriate card status - * event is received. The config() and release() entry points are - * used to configure or release a socket, in response to card insertion - * and ejection events. They are invoked from the event handler. - */ - static int has_ce2_string(struct pcmcia_device * link); static int xirc2ps_config(struct pcmcia_device * link); static void xirc2ps_release(struct pcmcia_device * link); - -/**************** - * The attach() and detach() entry points are used to create and destroy - * "instances" of the driver, where each instance represents everything - * needed to manage one actual PCMCIA card. - */ - static void xirc2ps_detach(struct pcmcia_device *p_dev); -/**************** - * You'll also need to prototype all the functions that will actually - * be used to talk to your device. See 'pcmem_cs' for a good example - * of a fully self-sufficient driver; the other drivers rely more or - * less on other parts of the kernel. - */ - static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id); typedef struct local_info_t { @@ -501,16 +478,6 @@ static const struct net_device_ops netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/**************** - * xirc2ps_attach() creates an "instance" of the driver, allocating - * local data structures for one device. The device is registered - * with Card Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a - * card insertion event. - */ - static int xirc2ps_probe(struct pcmcia_device *link) { @@ -529,9 +496,7 @@ xirc2ps_probe(struct pcmcia_device *link) link->priv = dev; /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 1; + link->config_index = 1; /* Fill in card specific entries */ dev->netdev_ops = &netdev_ops; @@ -542,13 +507,6 @@ xirc2ps_probe(struct pcmcia_device *link) return xirc2ps_config(link); } /* xirc2ps_attach */ -/**************** - * This deletes a driver "instance". The device is de-registered - * with Card Services. If it has been released, all local data - * structures are freed. Otherwise, the structures will be freed - * when the device is released. - */ - static void xirc2ps_detach(struct pcmcia_device *link) { @@ -667,44 +625,53 @@ has_ce2_string(struct pcmcia_device * p_dev) } static int -xirc2ps_config_modem(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data) { unsigned int ioaddr; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = ioaddr; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 16; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + + p_dev->resource[1]->start = p_dev->resource[0]->start; + for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { + p_dev->resource[0]->start = ioaddr; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } static int -xirc2ps_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data) { int *pass = priv_data; + resource_size_t tmp = p_dev->resource[1]->start; - if (cf->io.nwin > 0 && (cf->io.win[0].base & 0xf) == 8) { - p_dev->resource[1]->start = cf->io.win[0].base; - p_dev->resource[0]->start = p_dev->resource[1]->start - + (*pass ? (cf->index & 0x20 ? -24:8) - : (cf->index & 0x20 ? 8:-24)); - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8) + : (p_dev->config_index & 0x20 ? 8 : -24)); + + if ((p_dev->resource[0]->start & 0xf) == 8) + return -ENODEV; + + p_dev->resource[0]->end = 18; + p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 10; + p_dev->resource[1]->start = p_dev->resource[0]->start; + p_dev->resource[0]->start = tmp; + return pcmcia_request_io(p_dev); } @@ -727,11 +694,6 @@ static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, }; -/**************** - * xirc2ps_config() is scheduled to run after a CARD_INSERTION event - * is received, to configure the PCMCIA socket, and to make the - * ethernet device available to the system. - */ static int xirc2ps_config(struct pcmcia_device * link) { @@ -807,32 +769,24 @@ xirc2ps_config(struct pcmcia_device * link) goto failure; } - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->io_lines = 10; if (local->modem) { int pass; + link->config_flags |= CONF_AUTO_SET_IO; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status |= CCSR_AUDIO_ENA; - } - link->resource[1]->end = 8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; if (local->dingo) { /* Take the Modem IO port from the CIS and scan for a free * Ethernet port */ - link->resource[0]->end = 16; /* no Mako stuff anymore */ if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL)) goto port_found; } else { - link->resource[0]->end = 18; /* We do 2 passes here: The first one uses the regular mapping and * the second tries again, thereby considering that the 32 ports are * mirrored every 32 bytes. Actually we use a mirrored port for * the Mako if (on the first pass) the COR bit 5 is set. */ for (pass=0; pass < 2; pass++) - if (!pcmcia_loop_config(link, xirc2ps_config_check, &pass)) + if (!pcmcia_loop_config(link, xirc2ps_config_check, + &pass)) goto port_found; /* if special option: * try to configure as Ethernet only. @@ -840,7 +794,9 @@ xirc2ps_config(struct pcmcia_device * link) } printk(KNOT_XIRC "no ports available\n"); } else { + link->io_lines = 10; link->resource[0]->end = 16; + link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) { link->resource[0]->start = ioaddr; if (!(err = pcmcia_request_io(link))) @@ -861,16 +817,14 @@ xirc2ps_config(struct pcmcia_device * link) if ((err=pcmcia_request_irq(link, xirc2ps_interrupt))) goto config_error; - /**************** - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping. - */ - if ((err=pcmcia_request_configuration(link, &link->conf))) + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; + + if ((err = pcmcia_enable_device(link))) goto config_error; if (local->dingo) { - win_req_t req; - /* Reset the modem's BAR to the correct value * This is necessary because in the RequestConfiguration call, * the base address of the ethernet port (BasePort1) is written @@ -890,14 +844,14 @@ xirc2ps_config(struct pcmcia_device * link) * is at 0x0800. So we allocate a window into the attribute * memory and write direct to the CIS registers */ - req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; - req.Base = req.Size = 0; - req.AccessSpeed = 0; - if ((err = pcmcia_request_window(link, &req, &link->win))) + link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | + WIN_ENABLE; + link->resource[2]->start = link->resource[2]->end = 0; + if ((err = pcmcia_request_window(link, link->resource[2], 0))) goto config_error; - local->dingo_ccr = ioremap(req.Base,0x1000) + 0x0800; - if ((err = pcmcia_map_mem_page(link, link->win, 0))) + local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800; + if ((err = pcmcia_map_mem_page(link, link->resource[2], 0))) goto config_error; /* Setup the CCRs; there are no infos in the CIS about the Ethernet @@ -978,17 +932,12 @@ xirc2ps_config(struct pcmcia_device * link) return -ENODEV; } /* xirc2ps_config */ -/**************** - * After a card is removed, xirc2ps_release() will unregister the net - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void xirc2ps_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "release\n"); - if (link->win) { + if (link->resource[2]->end) { struct net_device *dev = link->priv; local_info_t *local = netdev_priv(dev); if (local->dingo) @@ -1830,9 +1779,7 @@ MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids); static struct pcmcia_driver xirc2ps_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "xirc2ps_cs", - }, + .name = "xirc2ps_cs", .probe = xirc2ps_probe, .remove = xirc2ps_detach, .id_table = xirc2ps_ids, diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c index 9a121a5b787c..df2484d45474 100644 --- a/drivers/net/wireless/airo_cs.c +++ b/drivers/net/wireless/airo_cs.c @@ -32,7 +32,6 @@ #include <linux/timer.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -54,58 +53,21 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the airo_cs - event handler. -*/ - static int airo_config(struct pcmcia_device *link); static void airo_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void airo_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - airo_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int airo_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "airo_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -117,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev) return airo_config(p_dev); } /* airo_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void airo_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_detach\n"); @@ -140,60 +93,12 @@ static void airo_detach(struct pcmcia_device *link) kfree(link->priv); } /* airo_detach */ -/*====================================================================== - - airo_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - -static int airo_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -206,20 +111,9 @@ static int airo_config(struct pcmcia_device *link) dev_dbg(&link->dev, "airo_config\n"); - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, airo_cs_config_check, NULL); if (ret) goto failed; @@ -227,12 +121,7 @@ static int airo_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; ((local_info_t *)link->priv)->eth_dev = @@ -241,17 +130,6 @@ static int airo_config(struct pcmcia_device *link) if (!((local_info_t *)link->priv)->eth_dev) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); return 0; failed: @@ -259,14 +137,6 @@ static int airo_config(struct pcmcia_device *link) return -ENODEV; } /* airo_config */ -/*====================================================================== - - After a card is removed, airo_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void airo_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "airo_release\n"); @@ -305,9 +175,7 @@ MODULE_DEVICE_TABLE(pcmcia, airo_ids); static struct pcmcia_driver airo_driver = { .owner = THIS_MODULE, - .drv = { - .name = "airo_cs", - }, + .name = "airo_cs", .probe = airo_probe, .remove = airo_detach, .id_table = airo_ids, @@ -315,12 +183,12 @@ static struct pcmcia_driver airo_driver = { .resume = airo_resume, }; -static int airo_cs_init(void) +static int __init airo_cs_init(void) { return pcmcia_register_driver(&airo_driver); } -static void airo_cs_cleanup(void) +static void __exit airo_cs_cleanup(void) { pcmcia_unregister_driver(&airo_driver); } diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index 3b632161c106..c96e19da2949 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -42,7 +42,6 @@ #include <linux/moduleparam.h> #include <linux/device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -64,58 +63,21 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards"); /*====================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the atmel_cs - event handler. -*/ - static int atmel_config(struct pcmcia_device *link); static void atmel_release(struct pcmcia_device *link); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static void atmel_detach(struct pcmcia_device *p_dev); typedef struct local_info_t { struct net_device *eth_dev; } local_info_t; -/*====================================================================== - - atmel_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - - ======================================================================*/ - static int atmel_probe(struct pcmcia_device *p_dev) { local_info_t *local; dev_dbg(&p_dev->dev, "atmel_attach()\n"); - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - /* Allocate space for private device-specific data */ local = kzalloc(sizeof(local_info_t), GFP_KERNEL); if (!local) { @@ -127,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev) return atmel_config(p_dev); } /* atmel_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - - ======================================================================*/ - static void atmel_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "atmel_detach\n"); @@ -145,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link) kfree(link->priv); } -/*====================================================================== - - atmel_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - - ======================================================================*/ - /* Call-back function to interrogate PCMCIA-specific information about the current existance of the card */ static int card_present(void *arg) @@ -165,47 +110,11 @@ static int card_present(void *arg) return 0; } -static int atmel_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int atmel_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -220,18 +129,9 @@ static int atmel_config(struct pcmcia_device *link) dev_dbg(&link->dev, "atmel_config\n"); - /* - In this loop, we scan the CIS for configuration table entries, - each of which describes a valid card configuration, including - voltage, IO window, memory window, and interrupt settings. - - We make no assumptions about the card to be configured: we use - just the information available in the CIS. In an ideal world, - this would work for any PCMCIA card, but it requires a complete - and accurate CIS. In practice, a driver usually "knows" most of - these things without consulting the CIS, and most client drivers - will only use the CIS to fill in implementation-defined details. - */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, atmel_config_check, NULL)) goto failed; @@ -240,12 +140,7 @@ static int atmel_config(struct pcmcia_device *link) goto failed; } - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -267,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link) return -ENODEV; } -/*====================================================================== - - After a card is removed, atmel_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - - ======================================================================*/ - static void atmel_release(struct pcmcia_device *link) { struct net_device *dev = ((local_info_t*)link->priv)->eth_dev; @@ -353,9 +240,7 @@ MODULE_DEVICE_TABLE(pcmcia, atmel_ids); static struct pcmcia_driver atmel_driver = { .owner = THIS_MODULE, - .drv = { - .name = "atmel_cs", - }, + .name = "atmel_cs", .probe = atmel_probe, .remove = atmel_detach, .id_table = atmel_ids, @@ -363,12 +248,12 @@ static struct pcmcia_driver atmel_driver = { .resume = atmel_resume, }; -static int atmel_cs_init(void) +static int __init atmel_cs_init(void) { return pcmcia_register_driver(&atmel_driver); } -static void atmel_cs_cleanup(void) +static void __exit atmel_cs_cleanup(void) { pcmcia_unregister_driver(&atmel_driver); } diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index dfbc41d431ff..7dcba5fafdc7 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -26,7 +26,6 @@ #include <linux/ssb/ssb.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -63,7 +62,6 @@ static int b43_pcmcia_resume(struct pcmcia_device *dev) static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) { struct ssb_bus *ssb; - win_req_t win; int err = -ENOMEM; int res = 0; @@ -73,30 +71,28 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) err = -ENODEV; - dev->conf.Attributes = CONF_ENABLE_IRQ; - dev->conf.IntType = INT_MEMORY_AND_IO; + dev->config_flags |= CONF_ENABLE_IRQ; - win.Attributes = WIN_ENABLE | WIN_DATA_WIDTH_16 | + dev->resource[2]->flags |= WIN_ENABLE | WIN_DATA_WIDTH_16 | WIN_USE_WAIT; - win.Base = 0; - win.Size = SSB_CORE_SIZE; - win.AccessSpeed = 250; - res = pcmcia_request_window(dev, &win, &dev->win); + dev->resource[2]->start = 0; + dev->resource[2]->end = SSB_CORE_SIZE; + res = pcmcia_request_window(dev, dev->resource[2], 250); if (res != 0) goto err_kfree_ssb; - res = pcmcia_map_mem_page(dev, dev->win, 0); + res = pcmcia_map_mem_page(dev, dev->resource[2], 0); if (res != 0) goto err_disable; if (!dev->irq) goto err_disable; - res = pcmcia_request_configuration(dev, &dev->conf); + res = pcmcia_enable_device(dev); if (res != 0) goto err_disable; - err = ssb_bus_pcmciabus_register(ssb, dev, win.Base); + err = ssb_bus_pcmciabus_register(ssb, dev, dev->resource[2]->start); if (err) goto err_disable; dev->priv = ssb; @@ -125,9 +121,7 @@ static void __devexit b43_pcmcia_remove(struct pcmcia_device *dev) static struct pcmcia_driver b43_pcmcia_driver = { .owner = THIS_MODULE, - .drv = { - .name = "b43-pcmcia", - }, + .name = "b43-pcmcia", .id_table = b43_pcmcia_tbl, .probe = b43_pcmcia_probe, .remove = __devexit_p(b43_pcmcia_remove), diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ba54d1b04d22..bd8a4134edeb 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -12,7 +12,6 @@ #include <linux/wireless.h> #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -437,7 +436,6 @@ static int hostap_cs_probe(struct pcmcia_device *p_dev) int ret; PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info); - p_dev->conf.IntType = INT_MEMORY_AND_IO; ret = prism2_config(p_dev); if (ret) { @@ -468,74 +466,11 @@ static void prism2_detach(struct pcmcia_device *link) } -/* run after a CARD_INSERTION event is received to configure the PCMCIA - * socket and make the device available to the system */ - -static int prism2_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X " - "(default 0x%02X)\n", cfg->index, dflt->index); - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc mismatch - skipping" - " this entry\n"); - return -ENODEV; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / - 10000 && !ignore_cis_vcc) { - PDEBUG(DEBUG_EXTRA, " Vcc (default) mismatch " - "- skipping this entry\n"); - return -ENODEV; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d " - "dflt->io.nwin=%d\n", - cfg->io.nwin, dflt->io.nwin); - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -557,6 +492,10 @@ static int prism2_config(struct pcmcia_device *link) } /* Look for an appropriate configuration table entry in the CIS */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, prism2_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -588,12 +527,7 @@ static int prism2_config(struct pcmcia_device *link) if (ret) goto failed_unlock; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed_unlock; @@ -602,20 +536,6 @@ static int prism2_config(struct pcmcia_device *link) spin_unlock_irqrestore(&local->irq_init_lock, flags); - /* Finally, report what we've done */ - printk(KERN_INFO "%s: index 0x%02x: ", - dev_info, link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp / 10, - link->conf.Vpp % 10); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - local->shutdown = 0; sandisk_enable_wireless(dev); @@ -627,7 +547,7 @@ static int prism2_config(struct pcmcia_device *link) return ret; failed_unlock: - spin_unlock_irqrestore(&local->irq_init_lock, flags); + spin_unlock_irqrestore(&local->irq_init_lock, flags); failed: kfree(hw_priv); prism2_release((u_long)link); @@ -779,9 +699,7 @@ MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids); static struct pcmcia_driver hostap_driver = { - .drv = { - .name = "hostap_cs", - }, + .name = "hostap_cs", .probe = hostap_cs_probe, .remove = prism2_detach, .owner = THIS_MODULE, diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 9c298396be50..ff1280f41336 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -28,7 +28,6 @@ #include <linux/firmware.h> #include <linux/netdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -761,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv, } -/********************************************************************/ -/* Card Services */ -/********************************************************************/ - -/* - * After a card is removed, if_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void if_cs_release(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -785,31 +775,12 @@ static void if_cs_release(struct pcmcia_device *p_dev) } -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. - */ - -static int if_cs_ioprobe(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data) { + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - /* IO window settings */ - if (cfg->io.nwin != 1) { + if (p_dev->resource[1]->end) { lbs_pr_err("wrong CIS (check number of IO windows)\n"); return -ENODEV; } @@ -835,15 +806,13 @@ static int if_cs_probe(struct pcmcia_device *p_dev) card->p_dev = p_dev; p_dev->priv = card; - p_dev->conf.Attributes = 0; - p_dev->conf.IntType = INT_MEMORY_AND_IO; + p_dev->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - /* * Allocate an interrupt line. Note that this does not assign * a handler to the interrupt, unless the 'Handler' member of @@ -861,14 +830,9 @@ static int if_cs_probe(struct pcmcia_device *p_dev) goto out1; } - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) { - lbs_pr_err("error in pcmcia_request_configuration\n"); + lbs_pr_err("error in pcmcia_enable_device\n"); goto out2; } @@ -962,12 +926,6 @@ out: } -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void if_cs_detach(struct pcmcia_device *p_dev) { struct if_cs_card *card = p_dev->priv; @@ -1000,9 +958,7 @@ MODULE_DEVICE_TABLE(pcmcia, if_cs_ids); static struct pcmcia_driver lbs_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRV_NAME, - }, + .name = DRV_NAME, .probe = if_cs_probe, .remove = if_cs_detach, .id_table = if_cs_ids, diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index ef46a2d88539..71b3d68b9403 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -93,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int orinoco_cs_probe(struct pcmcia_device *link) { @@ -117,23 +108,9 @@ orinoco_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return orinoco_cs_config(link); } /* orinoco_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void orinoco_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -145,76 +122,12 @@ static void orinoco_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* orinoco_cs_detach */ -/* - * orinoco_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - -static int orinoco_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -225,20 +138,10 @@ orinoco_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, orinoco_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -262,12 +165,7 @@ orinoco_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -291,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link) return -ENODEV; } /* orinoco_cs_config */ -/* - * After a card is removed, orinoco_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void orinoco_cs_release(struct pcmcia_device *link) { @@ -344,12 +237,6 @@ static int orinoco_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (David Gibson <hermes@gibson.dropbear.id.au>, " - "Pavel Roskin <proski@gnu.org>, et al)"; - static struct pcmcia_device_id orinoco_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0777), /* 3Com AirConnect PCI 777A */ PCMCIA_DEVICE_MANF_CARD(0x0156, 0x0002), /* Lucent Orinoco and old Intersil */ @@ -441,9 +328,7 @@ MODULE_DEVICE_TABLE(pcmcia, orinoco_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = orinoco_cs_probe, .remove = orinoco_cs_detach, .id_table = orinoco_cs_ids, @@ -454,8 +339,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_orinoco_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 873877e17e1b..fb859a5ad2eb 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -25,7 +25,6 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/delay.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -154,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle) /* PCMCIA stuff */ /********************************************************************/ -/* - * This creates an "instance" of the driver, allocating local data - * structures for one device. The device is registered with Card - * Services. - * - * The dev_link structure is initialized, but we don't actually - * configure the card at this point -- we wait until we receive a card - * insertion event. */ static int spectrum_cs_probe(struct pcmcia_device *link) { @@ -179,23 +170,9 @@ spectrum_cs_probe(struct pcmcia_device *link) card->p_dev = link; link->priv = priv; - /* General socket configuration defaults can go here. In this - * client, we assume very little, and rely on the CIS for - * almost everything. In most clients, many details (i.e., - * number, sizes, and attributes of IO windows) are fixed by - * the nature of the device, and can be hard-wired here. */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return spectrum_cs_config(link); } /* spectrum_cs_attach */ -/* - * This deletes a driver "instance". The device is de-registered with - * Card Services. If it has been released, all local data structures - * are freed. Otherwise, the structures will be freed when the device - * is released. - */ static void spectrum_cs_detach(struct pcmcia_device *link) { struct orinoco_private *priv = link->priv; @@ -207,76 +184,13 @@ static void spectrum_cs_detach(struct pcmcia_device *link) free_orinocodev(priv); } /* spectrum_cs_detach */ -/* - * spectrum_cs_config() is scheduled to run after a CARD_INSERTION - * event is received, to configure the PCMCIA socket, and to make the - * device available to the system. - */ - static int spectrum_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - goto next_entry; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - cfg->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) { - DEBUG(2, "%s: Vcc mismatch (vcc = %d, CIS = %d)\n", - __func__, vcc, - dflt->vcc.param[CISTPL_POWER_VNOM] / 10000); - if (!ignore_cis_vcc) - goto next_entry; - } - } + if (p_dev->config_index == 0) + return -EINVAL; - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - return 0; - -next_entry: - pcmcia_disable_device(p_dev); - return -ENODEV; + return pcmcia_request_io(p_dev); }; static int @@ -287,20 +201,10 @@ spectrum_cs_config(struct pcmcia_device *link) int ret; void __iomem *mem; - /* - * In this loop, we scan the CIS for configuration table - * entries, each of which describes a valid card - * configuration, including voltage, IO window, memory window, - * and interrupt settings. - * - * We make no assumptions about the card to be configured: we - * use just the information available in the CIS. In an ideal - * world, this would work for any PCMCIA card, but it requires - * a complete and accurate CIS. In practice, a driver usually - * "knows" most of these things without consulting the CIS, - * and most client drivers will only use the CIS to fill in - * implementation-defined details. - */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_IO | CONF_ENABLE_IRQ; + if (ignore_cis_vcc) + link->config_flags &= ~CONF_AUTO_CHECK_VCC; ret = pcmcia_loop_config(link, spectrum_cs_config_check, NULL); if (ret) { if (!ignore_cis_vcc) @@ -325,12 +229,7 @@ spectrum_cs_config(struct pcmcia_device *link) hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); hw->eeprom_pda = true; - /* - * This actually configures the PCMCIA socket -- setting up - * the I/O windows and the interrupt mapping, and putting the - * card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -358,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link) return -ENODEV; } /* spectrum_cs_config */ -/* - * After a card is removed, spectrum_cs_release() will unregister the - * device, and release the PCMCIA configuration. If the device is - * still open, this will be postponed until it is closed. - */ static void spectrum_cs_release(struct pcmcia_device *link) { @@ -407,12 +301,6 @@ spectrum_cs_resume(struct pcmcia_device *link) /* Module initialization */ /********************************************************************/ -/* Can't be declared "const" or the whole __initdata section will - * become const */ -static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION - " (Pavel Roskin <proski@gnu.org>," - " David Gibson <hermes@gibson.dropbear.id.au>, et al)"; - static struct pcmcia_device_id spectrum_cs_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x026c, 0x0001), /* Symbol Spectrum24 LA4137 */ PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0001), /* Socket Communications CF */ @@ -423,9 +311,7 @@ MODULE_DEVICE_TABLE(pcmcia, spectrum_cs_ids); static struct pcmcia_driver orinoco_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = spectrum_cs_probe, .remove = spectrum_cs_detach, .suspend = spectrum_cs_suspend, @@ -436,8 +322,6 @@ static struct pcmcia_driver orinoco_driver = { static int __init init_spectrum_cs(void) { - printk(KERN_DEBUG "%s\n", version); - return pcmcia_register_driver(&orinoco_driver); } diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c index 88560d0ae50a..af5b17ce5a15 100644 --- a/drivers/net/wireless/ray_cs.c +++ b/drivers/net/wireless/ray_cs.c @@ -46,7 +46,6 @@ #include <linux/ethtool.h> #include <linux/ieee80211.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -169,13 +168,6 @@ static int bc; */ static char *phy_addr = NULL; - -/* A struct pcmcia_device structure has fields for most things that are needed - to keep track of a socket, but there will usually be some device - specific information that also needs to be kept track of. The - 'priv' pointer in a struct pcmcia_device structure can be used to point to - a device-specific private data structure, like this. -*/ static unsigned int ray_mem_speed = 500; /* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */ @@ -290,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/*============================================================================= - ray_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -=============================================================================*/ static int ray_probe(struct pcmcia_device *p_dev) { ray_dev_t *local; @@ -318,9 +302,8 @@ static int ray_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags |= CONF_ENABLE_IRQ; + p_dev->config_index = 1; p_dev->priv = dev; @@ -353,12 +336,6 @@ fail_alloc_dev: return -ENOMEM; } /* ray_attach */ -/*============================================================================= - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -=============================================================================*/ static void ray_detach(struct pcmcia_device *link) { struct net_device *dev; @@ -381,17 +358,11 @@ static void ray_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "ray_cs ray_detach ending\n"); } /* ray_detach */ -/*============================================================================= - ray_config() is run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -=============================================================================*/ #define MAX_TUPLE_SIZE 128 static int ray_config(struct pcmcia_device *link) { int ret = 0; int i; - win_req_t req; struct net_device *dev = (struct net_device *)link->priv; ray_dev_t *local = netdev_priv(dev); @@ -412,54 +383,50 @@ static int ray_config(struct pcmcia_device *link) goto failed; dev->irq = link->irq; - /* This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; /*** Set up 32k window for shared memory (transmit and control) ************/ - req.Attributes = - WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x8000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &link->win); + link->resource[2]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; + link->resource[2]->start = 0; + link->resource[2]->end = 0x8000; + ret = pcmcia_request_window(link, link->resource[2], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, link->win, 0); + ret = pcmcia_map_mem_page(link, link->resource[2], 0); if (ret) goto failed; - local->sram = ioremap(req.Base, req.Size); + local->sram = ioremap(link->resource[2]->start, + resource_size(link->resource[2])); /*** Set up 16k window for shared memory (receive buffer) ***************/ - req.Attributes = + link->resource[3]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x4000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->rmem_handle); + link->resource[3]->start = 0; + link->resource[3]->end = 0x4000; + ret = pcmcia_request_window(link, link->resource[3], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->rmem_handle, 0x8000); + ret = pcmcia_map_mem_page(link, link->resource[3], 0x8000); if (ret) goto failed; - local->rmem = ioremap(req.Base, req.Size); + local->rmem = ioremap(link->resource[3]->start, + resource_size(link->resource[3])); /*** Set up window for attribute memory ***********************************/ - req.Attributes = + link->resource[4]->flags |= WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT; - req.Base = 0; - req.Size = 0x1000; - req.AccessSpeed = ray_mem_speed; - ret = pcmcia_request_window(link, &req, &local->amem_handle); + link->resource[4]->start = 0; + link->resource[4]->end = 0x1000; + ret = pcmcia_request_window(link, link->resource[4], ray_mem_speed); if (ret) goto failed; - ret = pcmcia_map_mem_page(link, local->amem_handle, 0); + ret = pcmcia_map_mem_page(link, link->resource[4], 0); if (ret) goto failed; - local->amem = ioremap(req.Base, req.Size); + local->amem = ioremap(link->resource[4]->start, + resource_size(link->resource[4])); dev_dbg(&link->dev, "ray_config sram=%p\n", local->sram); dev_dbg(&link->dev, "ray_config rmem=%p\n", local->rmem); @@ -775,11 +742,7 @@ static void join_net(u_long data) local->card_status = CARD_DOING_ACQ; } -/*============================================================================ - After a card is removed, ray_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -=============================================================================*/ + static void ray_release(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -2847,9 +2810,7 @@ MODULE_DEVICE_TABLE(pcmcia, ray_ids); static struct pcmcia_driver ray_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ray_cs", - }, + .name = "ray_cs", .probe = ray_probe, .remove = ray_detach, .id_table = ray_ids, diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h index 9f01ddb19748..e79848fbcca1 100644 --- a/drivers/net/wireless/ray_cs.h +++ b/drivers/net/wireless/ray_cs.h @@ -25,8 +25,6 @@ struct beacon_rx { typedef struct ray_dev_t { int card_status; int authentication_state; - window_handle_t amem_handle; /* handle to window for attribute memory */ - window_handle_t rmem_handle; /* handle to window for rx buffer on card */ void __iomem *sram; /* pointer to beginning of shared RAM */ void __iomem *amem; /* pointer to attribute mem window */ void __iomem *rmem; /* pointer to receive buffer window */ diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c index a1cc2d498a1c..ca3f8961fa27 100644 --- a/drivers/net/wireless/wl3501_cs.c +++ b/drivers/net/wireless/wl3501_cs.c @@ -48,7 +48,6 @@ #include <net/iw_handler.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -78,13 +77,6 @@ #define WL3501_RESUME 0 #define WL3501_SUSPEND 1 -/* - * The event() function is this driver's Card Services event handler. It will - * be called by Card Services when an appropriate card status event is - * received. The config() and release() entry points are used to configure or - * release a socket, in response to card insertion and ejection events. They - * are invoked from the wl24 event handler. - */ static int wl3501_config(struct pcmcia_device *link); static void wl3501_release(struct pcmcia_device *link); @@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = { .ndo_validate_addr = eth_validate_addr, }; -/** - * wl3501_attach - creates an "instance" of the driver - * - * Creates an "instance" of the driver, allocating local data structures for - * one device. The device is registered with Card Services. - * - * The dev_link structure is initialized, but we don't actually configure the - * card at this point -- we wait until we receive a card insertion event. - */ static int wl3501_probe(struct pcmcia_device *p_dev) { struct net_device *dev; @@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev) p_dev->resource[0]->flags = IO_DATA_PATH_WIDTH_8; /* General socket configuration */ - p_dev->conf.Attributes = CONF_ENABLE_IRQ; - p_dev->conf.IntType = INT_MEMORY_AND_IO; - p_dev->conf.ConfigIndex = 1; + p_dev->config_flags = CONF_ENABLE_IRQ; + p_dev->config_index = 1; dev = alloc_etherdev(sizeof(struct wl3501_card)); if (!dev) @@ -1914,14 +1896,6 @@ out_link: return -ENOMEM; } -/** - * wl3501_config - configure the PCMCIA socket and make eth device available - * @link - FILL_IN - * - * wl3501_config() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - */ static int wl3501_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link) if (ret) goto failed; - /* This actually configures the PCMCIA socket -- setting up the I/O - * windows and the interrupt mapping. */ - - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -2010,14 +1981,6 @@ failed: return -ENODEV; } -/** - * wl3501_release - unregister the net, release PCMCIA configuration - * @arg - link - * - * After a card is removed, wl3501_release() will unregister the net device, - * and release the PCMCIA configuration. If the device is still open, this - * will be postponed until it is closed. - */ static void wl3501_release(struct pcmcia_device *link) { pcmcia_disable_device(link); @@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids); static struct pcmcia_driver wl3501_driver = { .owner = THIS_MODULE, - .drv = { - .name = "wl3501_cs", - }, + .name = "wl3501_cs", .probe = wl3501_probe, .remove = wl3501_detach, .id_table = wl3501_ids, diff --git a/drivers/parport/parport_cs.c b/drivers/parport/parport_cs.c index 23e50f4a27c5..787ebdeae310 100644 --- a/drivers/parport/parport_cs.c +++ b/drivers/parport/parport_cs.c @@ -48,7 +48,6 @@ #include <linux/parport.h> #include <linux/parport_pc.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/cisreg.h> @@ -81,14 +80,6 @@ static void parport_detach(struct pcmcia_device *p_dev); static int parport_config(struct pcmcia_device *link); static void parport_cs_release(struct pcmcia_device *); -/*====================================================================== - - parport_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int parport_probe(struct pcmcia_device *link) { parport_info_t *info; @@ -101,23 +92,11 @@ static int parport_probe(struct pcmcia_device *link) link->priv = info; info->p_dev = link; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return parport_config(link); } /* parport_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void parport_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "parport_detach\n"); @@ -127,36 +106,14 @@ static void parport_detach(struct pcmcia_device *link) kfree(link->priv); } /* parport_detach */ -/*====================================================================== - - parport_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - parport device available to the system. - -======================================================================*/ - -static int parport_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int parport_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - if (epp_mode) - p_dev->conf.ConfigIndex |= FORCE_EPP_MODE; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int parport_config(struct pcmcia_device *link) @@ -167,13 +124,16 @@ static int parport_config(struct pcmcia_device *link) dev_dbg(&link->dev, "parport_config\n"); + if (epp_mode) + link->config_index |= FORCE_EPP_MODE; + ret = pcmcia_loop_config(link, parport_config_check, NULL); if (ret) goto failed; if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -202,14 +162,6 @@ failed: return -ENODEV; } /* parport_config */ -/*====================================================================== - - After a card is removed, parport_cs_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void parport_cs_release(struct pcmcia_device *link) { parport_info_t *info = link->priv; @@ -236,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, parport_ids); static struct pcmcia_driver parport_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "parport_cs", - }, + .name = "parport_cs", .probe = parport_probe, .remove = parport_detach, .id_table = parport_ids, diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 88c4c4098789..95dd7c62741f 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -441,14 +441,12 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, out_err: - flush_scheduled_work(); ops->hw_shutdown(skt); while (i-- > 0) { skt = PCMCIA_SOCKET(i); del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); if (i == 0) { iounmap(skt->virt_io + (u32)mips_io_port_base); skt->virt_io = NULL; @@ -480,7 +478,6 @@ int au1x00_drv_pcmcia_remove(struct platform_device *dev) del_timer_sync(&skt->poll_timer); pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); skt->ops->hw_shutdown(skt); au1x00_pcmcia_config_skt(skt, &dead_socket); iounmap(skt->virt_io + (u32)mips_io_port_base); diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 67530cefcf3c..5c36bda2963b 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -23,7 +23,6 @@ /* include the world */ -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index 807f2d75dad3..b2396647a165 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -31,7 +31,6 @@ #include <linux/proc_fs.h> #include <linux/types.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/cistpl.c b/drivers/pcmcia/cistpl.c index 91414a0ddc44..884a984216fe 100644 --- a/drivers/pcmcia/cistpl.c +++ b/drivers/pcmcia/cistpl.c @@ -28,7 +28,6 @@ #include <asm/unaligned.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c index 2ec8ac97445c..d9ea192c4001 100644 --- a/drivers/pcmcia/cs.c +++ b/drivers/pcmcia/cs.c @@ -33,7 +33,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -845,7 +844,7 @@ static int pcmcia_socket_dev_resume_noirq(struct device *dev) return __pcmcia_pm_op(dev, socket_early_resume); } -static int pcmcia_socket_dev_resume(struct device *dev) +static int __used pcmcia_socket_dev_resume(struct device *dev) { return __pcmcia_pm_op(dev, socket_late_resume); } diff --git a/drivers/pcmcia/cs_internal.h b/drivers/pcmcia/cs_internal.h index da055dc14d98..7f1953f78b12 100644 --- a/drivers/pcmcia/cs_internal.h +++ b/drivers/pcmcia/cs_internal.h @@ -33,18 +33,9 @@ typedef struct config_t { struct kref ref; unsigned int state; - unsigned int Attributes; - unsigned int IntType; - unsigned int ConfigBase; - unsigned char Status, Pin, Copy, Option, ExtStatus; - unsigned int CardValues; struct resource io[MAX_IO_WIN]; /* io ports */ struct resource mem[MAX_WIN]; /* mem areas */ - - struct { - u_int Attributes; - } irq; } config_t; diff --git a/drivers/pcmcia/ds.c b/drivers/pcmcia/ds.c index 55570d9e1e4c..100c4412457d 100644 --- a/drivers/pcmcia/ds.c +++ b/drivers/pcmcia/ds.c @@ -26,7 +26,6 @@ #include <linux/dma-mapping.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ss.h> @@ -52,7 +51,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) if (!p_drv->probe || !p_drv->remove) printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback " - "function\n", p_drv->drv.name); + "function\n", p_drv->name); while (did && did->match_flags) { for (i = 0; i < 4; i++) { @@ -65,7 +64,7 @@ static void pcmcia_check_driver(struct pcmcia_driver *p_drv) printk(KERN_DEBUG "pcmcia: %s: invalid hash for " "product string \"%s\": is 0x%x, should " - "be 0x%x\n", p_drv->drv.name, did->prod_id[i], + "be 0x%x\n", p_drv->name, did->prod_id[i], did->prod_id_hash[i], hash); printk(KERN_DEBUG "pcmcia: see " "Documentation/pcmcia/devicetable.txt for " @@ -180,10 +179,11 @@ int pcmcia_register_driver(struct pcmcia_driver *driver) /* initialize common fields */ driver->drv.bus = &pcmcia_bus_type; driver->drv.owner = driver->owner; + driver->drv.name = driver->name; mutex_init(&driver->dynids.lock); INIT_LIST_HEAD(&driver->dynids.list); - pr_debug("registering driver %s\n", driver->drv.name); + pr_debug("registering driver %s\n", driver->name); error = driver_register(&driver->drv); if (error < 0) @@ -203,7 +203,7 @@ EXPORT_SYMBOL(pcmcia_register_driver); */ void pcmcia_unregister_driver(struct pcmcia_driver *driver) { - pr_debug("unregistering driver %s\n", driver->drv.name); + pr_debug("unregistering driver %s\n", driver->name); driver_unregister(&driver->drv); pcmcia_free_dynids(driver); } @@ -264,7 +264,7 @@ static int pcmcia_device_probe(struct device *dev) p_drv = to_pcmcia_drv(dev->driver); s = p_dev->socket; - dev_dbg(dev, "trying to bind to %s\n", p_drv->drv.name); + dev_dbg(dev, "trying to bind to %s\n", p_drv->name); if ((!p_drv->probe) || (!p_dev->function_config) || (!try_module_get(p_drv->owner))) { @@ -276,21 +276,28 @@ static int pcmcia_device_probe(struct device *dev) ret = pccard_read_tuple(p_dev->socket, p_dev->func, CISTPL_CONFIG, &cis_config); if (!ret) { - p_dev->conf.ConfigBase = cis_config.base; - p_dev->conf.Present = cis_config.rmask[0]; + p_dev->config_base = cis_config.base; + p_dev->config_regs = cis_config.rmask[0]; + dev_dbg(dev, "base %x, regs %x", p_dev->config_base, + p_dev->config_regs); } else { dev_printk(KERN_INFO, dev, "pcmcia: could not parse base and rmask0 of CIS\n"); - p_dev->conf.ConfigBase = 0; - p_dev->conf.Present = 0; + p_dev->config_base = 0; + p_dev->config_regs = 0; } ret = p_drv->probe(p_dev); if (ret) { dev_dbg(dev, "binding to %s failed with %d\n", - p_drv->drv.name, ret); + p_drv->name, ret); goto put_module; } + dev_dbg(dev, "%s bound: Vpp %d.%d, idx %x, IRQ %d", p_drv->name, + p_dev->vpp/10, p_dev->vpp%10, p_dev->config_index, p_dev->irq); + dev_dbg(dev, "resources: ioport %pR %pR iomem %pR %pR %pR", + p_dev->resource[0], p_dev->resource[1], p_dev->resource[2], + p_dev->resource[3], p_dev->resource[4]); mutex_lock(&s->ops_mutex); if ((s->pcmcia_pfc) && @@ -374,13 +381,13 @@ static int pcmcia_device_remove(struct device *dev) if (p_dev->_irq || p_dev->_io || p_dev->_locked) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release config properly\n", - p_drv->drv.name); + p_drv->name); for (i = 0; i < MAX_WIN; i++) if (p_dev->_win & CLIENT_WIN_REQ(i)) dev_printk(KERN_INFO, dev, "pcmcia: driver %s did not release window properly\n", - p_drv->drv.name); + p_drv->name); /* references from pcmcia_probe_device */ pcmcia_put_dev(p_dev); @@ -1136,7 +1143,7 @@ static int pcmcia_dev_suspend(struct device *dev, pm_message_t state) dev_printk(KERN_ERR, dev, "pcmcia: device %s (driver %s) did " "not want to go to sleep (%d)\n", - p_dev->devname, p_drv->drv.name, ret); + p_dev->devname, p_drv->name, ret); mutex_lock(&p_dev->socket->ops_mutex); p_dev->suspended = 0; mutex_unlock(&p_dev->socket->ops_mutex); @@ -1178,7 +1185,7 @@ static int pcmcia_dev_resume(struct device *dev) if (p_dev->device_no == p_dev->func) { dev_dbg(dev, "requesting configuration\n"); - ret = pcmcia_request_configuration(p_dev, &p_dev->conf); + ret = pcmcia_enable_device(p_dev); if (ret) goto out; } diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c index 05d0879ce935..fc7906eaf228 100644 --- a/drivers/pcmcia/i82092.c +++ b/drivers/pcmcia/i82092.c @@ -16,7 +16,6 @@ #include <linux/device.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> #include <asm/io.h> diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c index 61746bd598b3..72a033a2acdb 100644 --- a/drivers/pcmcia/i82365.c +++ b/drivers/pcmcia/i82365.c @@ -51,7 +51,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <linux/isapnp.h> diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c index 24de49925863..2adb0106a039 100644 --- a/drivers/pcmcia/m32r_cfc.c +++ b/drivers/pcmcia/m32r_cfc.c @@ -27,7 +27,6 @@ #include <asm/system.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #undef MAX_IO_WIN /* FIXME */ #define MAX_IO_WIN 1 diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c index 8e4723844ad3..1511ff71c87b 100644 --- a/drivers/pcmcia/m32r_pcc.c +++ b/drivers/pcmcia/m32r_pcc.c @@ -28,7 +28,6 @@ #include <asm/addrspace.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> /* XXX: should be moved into asm/irq.h */ #define PCC0_IRQ 24 diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c index f0ecad99ce81..99d4f23cb435 100644 --- a/drivers/pcmcia/m8xx_pcmcia.c +++ b/drivers/pcmcia/m8xx_pcmcia.c @@ -59,7 +59,6 @@ #include <asm/irq.h> #include <asm/fs_pd.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #define pcmcia_info(args...) printk(KERN_INFO "m8xx_pcmcia: "args) diff --git a/drivers/pcmcia/o2micro.h b/drivers/pcmcia/o2micro.h index e74bebac2695..5096e92c7a4c 100644 --- a/drivers/pcmcia/o2micro.h +++ b/drivers/pcmcia/o2micro.h @@ -153,14 +153,14 @@ static int o2micro_override(struct yenta_socket *socket) if (use_speedup) { dev_info(&socket->dev->dev, - "O2: enabling read prefetch/write burst\n"); + "O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'\n"); config_writeb(socket, O2_RESERVED1, a | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); config_writeb(socket, O2_RESERVED2, b | O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST); } else { dev_info(&socket->dev->dev, - "O2: disabling read prefetch/write burst\n"); + "O2: disabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=on'\n"); config_writeb(socket, O2_RESERVED1, a & ~(O2_RES_READ_PREFETCH | O2_RES_WRITE_BURST)); config_writeb(socket, O2_RESERVED2, diff --git a/drivers/pcmcia/pcmcia_cis.c b/drivers/pcmcia/pcmcia_cis.c index 0ac54da15885..e2c92415b892 100644 --- a/drivers/pcmcia/pcmcia_cis.c +++ b/drivers/pcmcia/pcmcia_cis.c @@ -6,7 +6,7 @@ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * Copyright (C) 1999 David A. Hinds - * Copyright (C) 2004-2009 Dominik Brodowski + * Copyright (C) 2004-2010 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +22,6 @@ #include <pcmcia/cisreg.h> #include <pcmcia/cistpl.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/ds.h> #include "cs_internal.h" @@ -126,14 +125,24 @@ next_entry: return ret; } + +/** + * pcmcia_io_cfg_data_width() - convert cfgtable to data path width parameter + */ +static int pcmcia_io_cfg_data_width(unsigned int flags) +{ + if (!(flags & CISTPL_IO_8BIT)) + return IO_DATA_PATH_WIDTH_16; + if (!(flags & CISTPL_IO_16BIT)) + return IO_DATA_PATH_WIDTH_8; + return IO_DATA_PATH_WIDTH_AUTO; +} + + struct pcmcia_cfg_mem { struct pcmcia_device *p_dev; + int (*conf_check) (struct pcmcia_device *p_dev, void *priv_data); void *priv_data; - int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data); cisparse_t parse; cistpl_cftable_entry_t dflt; }; @@ -147,25 +156,102 @@ struct pcmcia_cfg_mem { */ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) { - cistpl_cftable_entry_t *cfg = &parse->cftable_entry; struct pcmcia_cfg_mem *cfg_mem = priv; + struct pcmcia_device *p_dev = cfg_mem->p_dev; + cistpl_cftable_entry_t *cfg = &parse->cftable_entry; + cistpl_cftable_entry_t *dflt = &cfg_mem->dflt; + unsigned int flags = p_dev->config_flags; + unsigned int vcc = p_dev->socket->socket.Vcc; + + dev_dbg(&p_dev->dev, "testing configuration %x, autoconf %x\n", + cfg->index, flags); /* default values */ - cfg_mem->p_dev->conf.ConfigIndex = cfg->index; + cfg_mem->p_dev->config_index = cfg->index; if (cfg->flags & CISTPL_CFTABLE_DEFAULT) cfg_mem->dflt = *cfg; - return cfg_mem->conf_check(cfg_mem->p_dev, cfg, &cfg_mem->dflt, - cfg_mem->p_dev->socket->socket.Vcc, - cfg_mem->priv_data); + /* check for matching Vcc? */ + if (flags & CONF_AUTO_CHECK_VCC) { + if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) { + if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) + return -ENODEV; + } + } + + /* set Vpp? */ + if (flags & CONF_AUTO_SET_VPP) { + if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; + else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) + p_dev->vpp = + dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; + } + + /* enable audio? */ + if ((flags & CONF_AUTO_AUDIO) && (cfg->flags & CISTPL_CFTABLE_AUDIO)) + p_dev->config_flags |= CONF_ENABLE_SPKR; + + + /* IO window settings? */ + if (flags & CONF_AUTO_SET_IO) { + cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; + int i = 0; + + p_dev->resource[0]->start = p_dev->resource[0]->end = 0; + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + if (io->nwin == 0) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= + pcmcia_io_cfg_data_width(io->flags); + if (io->nwin > 1) { + /* For multifunction cards, by convention, we + * configure the network function with window 0, + * and serial with window 1 */ + i = (io->win[1].len > io->win[0].len); + p_dev->resource[1]->flags = p_dev->resource[0]->flags; + p_dev->resource[1]->start = io->win[1-i].base; + p_dev->resource[1]->end = io->win[1-i].len; + } + p_dev->resource[0]->start = io->win[i].base; + p_dev->resource[0]->end = io->win[i].len; + p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; + } + + /* MEM window settings? */ + if (flags & CONF_AUTO_SET_IOMEM) { + /* so far, we only set one memory window */ + cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; + + p_dev->resource[2]->start = p_dev->resource[2]->end = 0; + if (mem->nwin == 0) + return -ENODEV; + + p_dev->resource[2]->start = mem->win[0].host_addr; + p_dev->resource[2]->end = mem->win[0].len; + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + p_dev->card_addr = mem->win[0].card_addr; + } + + dev_dbg(&p_dev->dev, + "checking configuration %x: %pr %pr %pr (%d lines)\n", + p_dev->config_index, p_dev->resource[0], p_dev->resource[1], + p_dev->resource[2], p_dev->io_lines); + + return cfg_mem->conf_check(p_dev, cfg_mem->priv_data); } /** * pcmcia_loop_config() - loop over configuration options * @p_dev: the struct pcmcia_device which we need to loop for. * @conf_check: function to call for each configuration option. - * It gets passed the struct pcmcia_device, the CIS data - * describing the configuration option, and private data + * It gets passed the struct pcmcia_device and private data * being passed to pcmcia_loop_config() * @priv_data: private data to be passed to the conf_check function. * @@ -175,9 +261,6 @@ static int pcmcia_do_loop_config(tuple_t *tuple, cisparse_t *parse, void *priv) */ int pcmcia_loop_config(struct pcmcia_device *p_dev, int (*conf_check) (struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data), void *priv_data) { diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c index 9ba4dade69a4..a9af0d784426 100644 --- a/drivers/pcmcia/pcmcia_resource.c +++ b/drivers/pcmcia/pcmcia_resource.c @@ -6,7 +6,7 @@ * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. * * Copyright (C) 1999 David A. Hinds - * Copyright (C) 2004-2005 Dominik Brodowski + * Copyright (C) 2004-2010 Dominik Brodowski * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,7 +26,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -56,6 +55,12 @@ struct resource *pcmcia_find_mem_region(u_long base, u_long num, u_long align, } +/** + * release_io_space() - release IO ports allocated with alloc_io_space() + * @s: pcmcia socket + * @res: resource to release + * + */ static void release_io_space(struct pcmcia_socket *s, struct resource *res) { resource_size_t num = resource_size(res); @@ -81,9 +86,14 @@ static void release_io_space(struct pcmcia_socket *s, struct resource *res) } } } -} /* release_io_space */ +} + -/** alloc_io_space +/** + * alloc_io_space() - allocate IO ports for use by a PCMCIA device + * @s: pcmcia socket + * @res: resource to allocate (begin: begin, end: size) + * @lines: number of IO lines decoded by the PCMCIA card * * Special stuff for managing IO windows, because they are scarce */ @@ -135,7 +145,7 @@ static int alloc_io_space(struct pcmcia_socket *s, struct resource *res, } dev_dbg(&s->dev, "alloc_io_space request result %d: %pR\n", ret, res); return ret; -} /* alloc_io_space */ +} /** @@ -168,14 +178,14 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev, return -EACCES; } - addr = (c->ConfigBase + where) >> 1; + addr = (p_dev->config_base + where) >> 1; ret = accessf(s, 1, addr, 1, val); mutex_unlock(&s->ops_mutex); return ret; -} /* pcmcia_access_config */ +} /** @@ -204,11 +214,20 @@ int pcmcia_write_config_byte(struct pcmcia_device *p_dev, off_t where, u8 val) EXPORT_SYMBOL(pcmcia_write_config_byte); -int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, +/** + * pcmcia_map_mem_page() - modify iomem window to point to a different offset + * @p_dev: pcmcia device + * @res: iomem resource already enabled by pcmcia_request_window() + * @offset: card_offset to map + * + * pcmcia_map_mem_page() modifies what can be read and written by accessing + * an iomem range previously enabled by pcmcia_request_window(), by setting + * the card_offset value to @offset. + */ +int pcmcia_map_mem_page(struct pcmcia_device *p_dev, struct resource *res, unsigned int offset) { struct pcmcia_socket *s = p_dev->socket; - struct resource *res = wh; unsigned int w; int ret; @@ -223,98 +242,111 @@ int pcmcia_map_mem_page(struct pcmcia_device *p_dev, window_handle_t wh, dev_warn(&p_dev->dev, "failed to set_mem_map\n"); mutex_unlock(&s->ops_mutex); return ret; -} /* pcmcia_map_mem_page */ +} EXPORT_SYMBOL(pcmcia_map_mem_page); -/** pcmcia_modify_configuration +/** + * pcmcia_fixup_iowidth() - reduce io width to 8bit + * @p_dev: pcmcia device * - * Modify a locked socket configuration + * pcmcia_fixup_iowidth() allows a PCMCIA device driver to reduce the + * IO width to 8bit after having called pcmcia_enable_device() + * previously. */ -int pcmcia_modify_configuration(struct pcmcia_device *p_dev, - modconf_t *mod) +int pcmcia_fixup_iowidth(struct pcmcia_device *p_dev) { - struct pcmcia_socket *s; - config_t *c; - int ret; - - s = p_dev->socket; + struct pcmcia_socket *s = p_dev->socket; + pccard_io_map io_off = { 0, 0, 0, 0, 1 }; + pccard_io_map io_on; + int i, ret = 0; mutex_lock(&s->ops_mutex); - c = p_dev->function_config; - if (!(s->state & SOCKET_PRESENT)) { - dev_dbg(&p_dev->dev, "No card present\n"); - ret = -ENODEV; - goto unlock; - } - if (!(c->state & CONFIG_LOCKED)) { - dev_dbg(&p_dev->dev, "Configuration isnt't locked\n"); + dev_dbg(&p_dev->dev, "fixup iowidth to 8bit\n"); + + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); ret = -EACCES; goto unlock; } - if (mod->Attributes & (CONF_IRQ_CHANGE_VALID | CONF_VCC_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc or IRQ is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; - } + io_on.speed = io_speed; + for (i = 0; i < MAX_IO_WIN; i++) { + if (!s->io[i].res) + continue; + io_off.map = i; + io_on.map = i; - /* We only allow changing Vpp1 and Vpp2 to the same value */ - if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) && - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - if (mod->Vpp1 != mod->Vpp2) { - dev_dbg(&p_dev->dev, - "Vpp1 and Vpp2 must be the same\n"); - ret = -EINVAL; - goto unlock; - } - s->socket.Vpp = mod->Vpp1; - if (s->ops->set_socket(s, &s->socket)) { - dev_printk(KERN_WARNING, &p_dev->dev, - "Unable to set VPP\n"); - ret = -EIO; - goto unlock; - } - } else if ((mod->Attributes & CONF_VPP1_CHANGE_VALID) || - (mod->Attributes & CONF_VPP2_CHANGE_VALID)) { - dev_dbg(&p_dev->dev, - "changing Vcc is not allowed at this time\n"); - ret = -EINVAL; - goto unlock; + io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; + io_on.start = s->io[i].res->start; + io_on.stop = s->io[i].res->end; + + s->ops->set_io_map(s, &io_off); + mdelay(40); + s->ops->set_io_map(s, &io_on); } +unlock: + mutex_unlock(&s->ops_mutex); + + return ret; +} +EXPORT_SYMBOL(pcmcia_fixup_iowidth); + + +/** + * pcmcia_fixup_vpp() - set Vpp to a new voltage level + * @p_dev: pcmcia device + * @new_vpp: new Vpp voltage + * + * pcmcia_fixup_vpp() allows a PCMCIA device driver to set Vpp to + * a new voltage level between calls to pcmcia_enable_device() + * and pcmcia_disable_device(). + */ +int pcmcia_fixup_vpp(struct pcmcia_device *p_dev, unsigned char new_vpp) +{ + struct pcmcia_socket *s = p_dev->socket; + int ret = 0; - if (mod->Attributes & CONF_IO_CHANGE_WIDTH) { - pccard_io_map io_off = { 0, 0, 0, 0, 1 }; - pccard_io_map io_on; - int i; + mutex_lock(&s->ops_mutex); - io_on.speed = io_speed; - for (i = 0; i < MAX_IO_WIN; i++) { - if (!s->io[i].res) - continue; - io_off.map = i; - io_on.map = i; + dev_dbg(&p_dev->dev, "fixup Vpp to %d\n", new_vpp); - io_on.flags = MAP_ACTIVE | IO_DATA_PATH_WIDTH_8; - io_on.start = s->io[i].res->start; - io_on.stop = s->io[i].res->end; + if (!(s->state & SOCKET_PRESENT) || + !(p_dev->function_config->state & CONFIG_LOCKED)) { + dev_dbg(&p_dev->dev, "No card? Config not locked?\n"); + ret = -EACCES; + goto unlock; + } - s->ops->set_io_map(s, &io_off); - mdelay(40); - s->ops->set_io_map(s, &io_on); - } + s->socket.Vpp = new_vpp; + if (s->ops->set_socket(s, &s->socket)) { + dev_warn(&p_dev->dev, "Unable to set VPP\n"); + ret = -EIO; + goto unlock; } - ret = 0; + p_dev->vpp = new_vpp; + unlock: mutex_unlock(&s->ops_mutex); return ret; -} /* modify_configuration */ -EXPORT_SYMBOL(pcmcia_modify_configuration); +} +EXPORT_SYMBOL(pcmcia_fixup_vpp); +/** + * pcmcia_release_configuration() - physically disable a PCMCIA device + * @p_dev: pcmcia device + * + * pcmcia_release_configuration() is the 1:1 counterpart to + * pcmcia_enable_device(): If a PCMCIA device is no longer used by any + * driver, the Vpp voltage is set to 0, IRQs will no longer be generated, + * and I/O ranges will be disabled. As pcmcia_release_io() and + * pcmcia_release_window() still need to be called, device drivers are + * expected to call pcmcia_disable_device() instead. + */ int pcmcia_release_configuration(struct pcmcia_device *p_dev) { pccard_io_map io = { 0, 0, 0, 0, 1 }; @@ -327,7 +359,7 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev) if (p_dev->_locked) { p_dev->_locked = 0; if (--(s->lock_count) == 0) { - s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ + s->socket.flags = SS_OUTPUT_ENA; /* Is this correct? */ s->socket.Vpp = 0; s->socket.io_irq = 0; s->ops->set_socket(s, &s->socket); @@ -349,16 +381,18 @@ int pcmcia_release_configuration(struct pcmcia_device *p_dev) mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_release_configuration */ +} -/** pcmcia_release_io +/** + * pcmcia_release_io() - release I/O allocated by a PCMCIA device + * @p_dev: pcmcia device * - * Release_io() releases the I/O ranges allocated by a client. This - * may be invoked some time after a card ejection has already dumped - * the actual socket configuration, so if the client is "stale", we - * don't bother checking the port ranges against the current socket - * values. + * pcmcia_release_io() releases the I/O ranges allocated by a PCMCIA + * device. This may be invoked some time after a card ejection has + * already dumped the actual socket configuration, so if the client is + * "stale", we don't bother checking the port ranges against the + * current socket values. */ static int pcmcia_release_io(struct pcmcia_device *p_dev) { @@ -387,6 +421,14 @@ out: } /* pcmcia_release_io */ +/** + * pcmcia_release_window() - release reserved iomem for PCMCIA devices + * @p_dev: pcmcia device + * @res: iomem resource to release + * + * pcmcia_release_window() releases &struct resource *res which was + * previously reserved by calling pcmcia_request_window(). + */ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) { struct pcmcia_socket *s = p_dev->socket; @@ -420,6 +462,8 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) kfree(win->res); win->res = NULL; } + res->start = res->end = 0; + res->flags = IORESOURCE_MEM; p_dev->_win &= ~CLIENT_WIN_REQ(w); mutex_unlock(&s->ops_mutex); @@ -428,23 +472,30 @@ int pcmcia_release_window(struct pcmcia_device *p_dev, struct resource *res) EXPORT_SYMBOL(pcmcia_release_window); -int pcmcia_request_configuration(struct pcmcia_device *p_dev, - config_req_t *req) +/** + * pcmcia_enable_device() - set up and activate a PCMCIA device + * @p_dev: the associated PCMCIA device + * + * pcmcia_enable_device() physically enables a PCMCIA device. It parses + * the flags passed to in @flags and stored in @p_dev->flags and sets up + * the Vpp voltage, enables the speaker line, I/O ports and store proper + * values to configuration registers. + */ +int pcmcia_enable_device(struct pcmcia_device *p_dev) { int i; - u_int base; + unsigned int base; struct pcmcia_socket *s = p_dev->socket; config_t *c; pccard_io_map iomap; + unsigned char status = 0; + unsigned char ext_status = 0; + unsigned char option = 0; + unsigned int flags = p_dev->config_flags; if (!(s->state & SOCKET_PRESENT)) return -ENODEV; - if (req->IntType & INT_CARDBUS) { - dev_dbg(&p_dev->dev, "IntType may not be INT_CARDBUS\n"); - return -EINVAL; - } - mutex_lock(&s->ops_mutex); c = p_dev->function_config; if (c->state & CONFIG_LOCKED) { @@ -454,7 +505,7 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Do power control. We don't allow changes in Vcc. */ - s->socket.Vpp = req->Vpp; + s->socket.Vpp = p_dev->vpp; if (s->ops->set_socket(s, &s->socket)) { mutex_unlock(&s->ops_mutex); dev_printk(KERN_WARNING, &p_dev->dev, @@ -463,64 +514,72 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, } /* Pick memory or I/O card, DMA mode, interrupt */ - c->IntType = req->IntType; - c->Attributes = req->Attributes; - if (req->IntType & INT_MEMORY_AND_IO) + if (p_dev->_io) s->socket.flags |= SS_IOCARD; - if (req->IntType & INT_ZOOMED_VIDEO) - s->socket.flags |= SS_ZVCARD | SS_IOCARD; - if (req->Attributes & CONF_ENABLE_DMA) - s->socket.flags |= SS_DMA_MODE; - if (req->Attributes & CONF_ENABLE_SPKR) + if (flags & CONF_ENABLE_SPKR) { s->socket.flags |= SS_SPKR_ENA; - if (req->Attributes & CONF_ENABLE_IRQ) + status = CCSR_AUDIO_ENA; + if (!(p_dev->config_regs & PRESENT_STATUS)) + dev_warn(&p_dev->dev, "speaker requested, but " + "PRESENT_STATUS not set!\n"); + } + if (flags & CONF_ENABLE_IRQ) s->socket.io_irq = s->pcmcia_irq; else s->socket.io_irq = 0; + if (flags & CONF_ENABLE_ESR) { + p_dev->config_regs |= PRESENT_EXT_STATUS; + ext_status = ESR_REQ_ATTN_ENA; + } s->ops->set_socket(s, &s->socket); s->lock_count++; + dev_dbg(&p_dev->dev, + "enable_device: V %d, flags %x, base %x, regs %x, idx %x\n", + p_dev->vpp, flags, p_dev->config_base, p_dev->config_regs, + p_dev->config_index); + /* Set up CIS configuration registers */ - base = c->ConfigBase = req->ConfigBase; - c->CardValues = req->Present; - if (req->Present & PRESENT_COPY) { - c->Copy = req->Copy; - pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &c->Copy); - } - if (req->Present & PRESENT_OPTION) { + base = p_dev->config_base; + if (p_dev->config_regs & PRESENT_COPY) { + u16 tmp = 0; + dev_dbg(&p_dev->dev, "clearing CISREG_SCR\n"); + pcmcia_write_cis_mem(s, 1, (base + CISREG_SCR)>>1, 1, &tmp); + } + if (p_dev->config_regs & PRESENT_PIN_REPLACE) { + u16 tmp = 0; + dev_dbg(&p_dev->dev, "clearing CISREG_PRR\n"); + pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &tmp); + } + if (p_dev->config_regs & PRESENT_OPTION) { if (s->functions == 1) { - c->Option = req->ConfigIndex & COR_CONFIG_MASK; + option = p_dev->config_index & COR_CONFIG_MASK; } else { - c->Option = req->ConfigIndex & COR_MFC_CONFIG_MASK; - c->Option |= COR_FUNC_ENA|COR_IREQ_ENA; - if (req->Present & PRESENT_IOBASE_0) - c->Option |= COR_ADDR_DECODE; + option = p_dev->config_index & COR_MFC_CONFIG_MASK; + option |= COR_FUNC_ENA|COR_IREQ_ENA; + if (p_dev->config_regs & PRESENT_IOBASE_0) + option |= COR_ADDR_DECODE; } - if ((req->Attributes & CONF_ENABLE_IRQ) && - !(req->Attributes & CONF_ENABLE_PULSE_IRQ)) - c->Option |= COR_LEVEL_REQ; - pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &c->Option); + if ((flags & CONF_ENABLE_IRQ) && + !(flags & CONF_ENABLE_PULSE_IRQ)) + option |= COR_LEVEL_REQ; + pcmcia_write_cis_mem(s, 1, (base + CISREG_COR)>>1, 1, &option); mdelay(40); } - if (req->Present & PRESENT_STATUS) { - c->Status = req->Status; - pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &c->Status); - } - if (req->Present & PRESENT_PIN_REPLACE) { - c->Pin = req->Pin; - pcmcia_write_cis_mem(s, 1, (base + CISREG_PRR)>>1, 1, &c->Pin); - } - if (req->Present & PRESENT_EXT_STATUS) { - c->ExtStatus = req->ExtStatus; - pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, &c->ExtStatus); - } - if (req->Present & PRESENT_IOBASE_0) { + if (p_dev->config_regs & PRESENT_STATUS) + pcmcia_write_cis_mem(s, 1, (base + CISREG_CCSR)>>1, 1, &status); + + if (p_dev->config_regs & PRESENT_EXT_STATUS) + pcmcia_write_cis_mem(s, 1, (base + CISREG_ESR)>>1, 1, + &ext_status); + + if (p_dev->config_regs & PRESENT_IOBASE_0) { u8 b = c->io[0].start & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_0)>>1, 1, &b); b = (c->io[0].start >> 8) & 0xff; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOBASE_1)>>1, 1, &b); } - if (req->Present & PRESENT_IOSIZE) { + if (p_dev->config_regs & PRESENT_IOSIZE) { u8 b = resource_size(&c->io[0]) + resource_size(&c->io[1]) - 1; pcmcia_write_cis_mem(s, 1, (base + CISREG_IOSIZE)>>1, 1, &b); } @@ -551,14 +610,15 @@ int pcmcia_request_configuration(struct pcmcia_device *p_dev, p_dev->_locked = 1; mutex_unlock(&s->ops_mutex); return 0; -} /* pcmcia_request_configuration */ -EXPORT_SYMBOL(pcmcia_request_configuration); +} /* pcmcia_enable_device */ +EXPORT_SYMBOL(pcmcia_enable_device); /** * pcmcia_request_io() - attempt to reserve port ranges for PCMCIA devices + * @p_dev: the associated PCMCIA device * - * pcmcia_request_io() attepts to reserve the IO port ranges specified in + * pcmcia_request_io() attempts to reserve the IO port ranges specified in * &struct pcmcia_device @p_dev->resource[0] and @p_dev->resource[1]. The * "start" value is the requested start of the IO port resource; "end" * reflects the number of ports requested. The number of IO lines requested @@ -622,11 +682,13 @@ EXPORT_SYMBOL(pcmcia_request_io); /** * pcmcia_request_irq() - attempt to request a IRQ for a PCMCIA device + * @p_dev: the associated PCMCIA device + * @handler: IRQ handler to register * - * pcmcia_request_irq() is a wrapper around request_irq which will allow + * pcmcia_request_irq() is a wrapper around request_irq() which allows * the PCMCIA core to clean up the registration in pcmcia_disable_device(). * Drivers are free to use request_irq() directly, but then they need to - * call free_irq themselfves, too. Also, only IRQF_SHARED capable IRQ + * call free_irq() themselfves, too. Also, only %IRQF_SHARED capable IRQ * handlers are allowed. */ int __must_check pcmcia_request_irq(struct pcmcia_device *p_dev, @@ -649,12 +711,14 @@ EXPORT_SYMBOL(pcmcia_request_irq); /** * pcmcia_request_exclusive_irq() - attempt to request an exclusive IRQ first + * @p_dev: the associated PCMCIA device + * @handler: IRQ handler to register * - * pcmcia_request_exclusive_irq() is a wrapper around request_irq which + * pcmcia_request_exclusive_irq() is a wrapper around request_irq() which * attempts first to request an exclusive IRQ. If it fails, it also accepts * a shared IRQ, but prints out a warning. PCMCIA drivers should allow for * IRQ sharing and either use request_irq directly (then they need to call - * free_irq themselves, too), or the pcmcia_request_irq() function. + * free_irq() themselves, too), or the pcmcia_request_irq() function. */ int __must_check __pcmcia_request_exclusive_irq(struct pcmcia_device *p_dev, @@ -795,38 +859,47 @@ int pcmcia_setup_irq(struct pcmcia_device *p_dev) } -/** pcmcia_request_window +/** + * pcmcia_request_window() - attempt to reserve iomem for PCMCIA devices + * @p_dev: the associated PCMCIA device + * @res: &struct resource pointing to p_dev->resource[2..5] + * @speed: access speed * - * Request_window() establishes a mapping between card memory space - * and system memory space. + * pcmcia_request_window() attepts to reserve an iomem ranges specified in + * &struct resource @res pointing to one of the entries in + * &struct pcmcia_device @p_dev->resource[2..5]. The "start" value is the + * requested start of the IO mem resource; "end" reflects the size + * requested. */ -int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_handle_t *wh) +int pcmcia_request_window(struct pcmcia_device *p_dev, struct resource *res, + unsigned int speed) { struct pcmcia_socket *s = p_dev->socket; pccard_mem_map *win; u_long align; - struct resource *res; int w; + dev_dbg(&p_dev->dev, "request_window %pR %d\n", res, speed); + if (!(s->state & SOCKET_PRESENT)) { dev_dbg(&p_dev->dev, "No card present\n"); return -ENODEV; } /* Window size defaults to smallest available */ - if (req->Size == 0) - req->Size = s->map_size; - align = (s->features & SS_CAP_MEM_ALIGN) ? req->Size : s->map_size; - if (req->Size & (s->map_size-1)) { + if (res->end == 0) + res->end = s->map_size; + align = (s->features & SS_CAP_MEM_ALIGN) ? res->end : s->map_size; + if (res->end & (s->map_size-1)) { dev_dbg(&p_dev->dev, "invalid map size\n"); return -EINVAL; } - if ((req->Base && (s->features & SS_CAP_STATIC_MAP)) || - (req->Base & (align-1))) { + if ((res->start && (s->features & SS_CAP_STATIC_MAP)) || + (res->start & (align-1))) { dev_dbg(&p_dev->dev, "invalid base address\n"); return -EINVAL; } - if (req->Base) + if (res->start) align = 0; /* Allocate system memory window */ @@ -843,7 +916,7 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha win = &s->win[w]; if (!(s->features & SS_CAP_STATIC_MAP)) { - win->res = pcmcia_find_mem_region(req->Base, req->Size, align, + win->res = pcmcia_find_mem_region(res->start, res->end, align, 0, s); if (!win->res) { dev_dbg(&p_dev->dev, "allocating mem region failed\n"); @@ -855,8 +928,8 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha /* Configure the socket controller */ win->map = w+1; - win->flags = req->Attributes; - win->speed = req->AccessSpeed; + win->flags = res->flags & WIN_FLAGS_MAP; + win->speed = speed; win->card_start = 0; if (s->ops->set_mem_map(s, win) != 0) { @@ -868,17 +941,14 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha /* Return window handle */ if (s->features & SS_CAP_STATIC_MAP) - req->Base = win->static_start; + res->start = win->static_start; else - req->Base = win->res->start; + res->start = win->res->start; /* convert to new-style resources */ - res = p_dev->resource[w + MAX_IO_WIN]; - res->start = req->Base; - res->end = req->Base + req->Size - 1; - res->flags &= ~IORESOURCE_BITS; - res->flags |= (req->Attributes & WIN_FLAGS_MAP) | (win->map << 2); - res->flags |= IORESOURCE_MEM; + res->end += res->start - 1; + res->flags &= ~WIN_FLAGS_REQ; + res->flags |= (win->map << 2) | IORESOURCE_MEM; res->parent = win->res; if (win->res) request_resource(&iomem_resource, res); @@ -886,15 +956,30 @@ int pcmcia_request_window(struct pcmcia_device *p_dev, win_req_t *req, window_ha dev_dbg(&p_dev->dev, "request_window results in %pR\n", res); mutex_unlock(&s->ops_mutex); - *wh = res; return 0; } /* pcmcia_request_window */ EXPORT_SYMBOL(pcmcia_request_window); + +/** + * pcmcia_disable_device() - disable and clean up a PCMCIA device + * @p_dev: the associated PCMCIA device + * + * pcmcia_disable_device() is the driver-callable counterpart to + * pcmcia_enable_device(): If a PCMCIA device is no longer used, + * drivers are expected to clean up and disable the device by calling + * this function. Any I/O ranges (iomem and ioports) will be released, + * the Vpp voltage will be set to 0, and IRQs will no longer be + * generated -- at least if there is no other card function (of + * multifunction devices) being used. + */ void pcmcia_disable_device(struct pcmcia_device *p_dev) { int i; + + dev_dbg(&p_dev->dev, "disabling device\n"); + for (i = 0; i < MAX_WIN; i++) { struct resource *res = p_dev->resource[MAX_IO_WIN + i]; if (res->flags & WIN_FLAGS_REQ) diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c index deef6656ab7b..8cbfa067171f 100644 --- a/drivers/pcmcia/pd6729.c +++ b/drivers/pcmcia/pd6729.c @@ -18,7 +18,6 @@ #include <linux/io.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <asm/system.h> diff --git a/drivers/pcmcia/rsrc_iodyn.c b/drivers/pcmcia/rsrc_iodyn.c index 8510c35d2952..523eb691c30b 100644 --- a/drivers/pcmcia/rsrc_iodyn.c +++ b/drivers/pcmcia/rsrc_iodyn.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_mgr.c b/drivers/pcmcia/rsrc_mgr.c index 4e80421fd908..aa628ed0e9f4 100644 --- a/drivers/pcmcia/rsrc_mgr.c +++ b/drivers/pcmcia/rsrc_mgr.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/rsrc_nonstatic.c b/drivers/pcmcia/rsrc_nonstatic.c index 96f348b35fde..b187555d4388 100644 --- a/drivers/pcmcia/rsrc_nonstatic.c +++ b/drivers/pcmcia/rsrc_nonstatic.c @@ -29,7 +29,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include "cs_internal.h" diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c index e09851480295..945857f8c284 100644 --- a/drivers/pcmcia/sa1100_generic.c +++ b/drivers/pcmcia/sa1100_generic.c @@ -35,7 +35,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <asm/hardware/scoop.h> diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index 6f1a86b43c60..689e3c02edb8 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -627,8 +627,6 @@ void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt) pcmcia_unregister_socket(&skt->socket); - flush_scheduled_work(); - skt->ops->hw_shutdown(skt); soc_common_pcmcia_config_skt(skt, &dead_socket); @@ -720,8 +718,6 @@ int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt) pcmcia_unregister_socket(&skt->socket); out_err_7: - flush_scheduled_work(); - skt->ops->hw_shutdown(skt); out_err_6: list_del(&skt->node); diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 3fba3a679128..bbcd5385a221 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -11,7 +11,6 @@ /* include the world */ #include <linux/cpufreq.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/socket_sysfs.c b/drivers/pcmcia/socket_sysfs.c index cb0d3ace18bd..71aeed93037c 100644 --- a/drivers/pcmcia/socket_sysfs.c +++ b/drivers/pcmcia/socket_sysfs.c @@ -27,7 +27,6 @@ #include <asm/irq.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c index be0d841c7ebd..310160bffe38 100644 --- a/drivers/pcmcia/tcic.c +++ b/drivers/pcmcia/tcic.c @@ -49,7 +49,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include "tcic.h" diff --git a/drivers/pcmcia/vrc4173_cardu.c b/drivers/pcmcia/vrc4173_cardu.c index 9b3c15827e5c..c6d36b3a6ce8 100644 --- a/drivers/pcmcia/vrc4173_cardu.c +++ b/drivers/pcmcia/vrc4173_cardu.c @@ -461,7 +461,7 @@ static int __devinit vrc4173_cardu_probe(struct pci_dev *dev, { vrc4173_socket_t *socket; unsigned long start, len, flags; - int slot, err; + int slot, err, ret; slot = vrc4173_cardu_slots++; socket = &cardu_sockets[slot]; @@ -474,43 +474,63 @@ static int __devinit vrc4173_cardu_probe(struct pci_dev *dev, return err; start = pci_resource_start(dev, 0); - if (start == 0) - return -ENODEV; + if (start == 0) { + ret = -ENODEV; + goto disable; + } len = pci_resource_len(dev, 0); - if (len == 0) - return -ENODEV; + if (len == 0) { + ret = -ENODEV; + goto disable; + } - if (((flags = pci_resource_flags(dev, 0)) & IORESOURCE_MEM) == 0) - return -EBUSY; + flags = pci_resource_flags(dev, 0); + if ((flags & IORESOURCE_MEM) == 0) { + ret = -EBUSY; + goto disable; + } - if ((err = pci_request_regions(dev, socket->name)) < 0) - return err; + err = pci_request_regions(dev, socket->name); + if (err < 0) { + ret = err; + goto disable; + } socket->base = ioremap(start, len); - if (socket->base == NULL) - return -ENODEV; + if (socket->base == NULL) { + ret = -ENODEV; + goto release; + } socket->dev = dev; socket->pcmcia_socket = pcmcia_register_socket(slot, &cardu_operations, 1); if (socket->pcmcia_socket == NULL) { - iounmap(socket->base); - socket->base = NULL; - return -ENOMEM; + ret = -ENOMEM; + goto unmap; } if (request_irq(dev->irq, cardu_interrupt, IRQF_SHARED, socket->name, socket) < 0) { - pcmcia_unregister_socket(socket->pcmcia_socket); - socket->pcmcia_socket = NULL; - iounmap(socket->base); - socket->base = NULL; - return -EBUSY; + ret = -EBUSY; + goto unregister; } printk(KERN_INFO "%s at %#08lx, IRQ %d\n", socket->name, start, dev->irq); return 0; + +unregister: + pcmcia_unregister_socket(socket->pcmcia_socket); + socket->pcmcia_socket = NULL; +unmap: + iounmap(socket->base); + socket->base = NULL; +release: + pci_release_regions(dev); +disable: + pci_disable_device(dev); + return ret; } static int __devinit vrc4173_cardu_setup(char *options) diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c index fa88c360c37a..3b67a1b6a197 100644 --- a/drivers/pcmcia/xxs1500_ss.c +++ b/drivers/pcmcia/xxs1500_ss.c @@ -17,7 +17,6 @@ #include <linux/slab.h> #include <linux/spinlock.h> -#include <pcmcia/cs.h> #include <pcmcia/ss.h> #include <pcmcia/cistpl.h> diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 414d9a6f9a32..408dbaa080a1 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -20,7 +20,6 @@ #include <linux/slab.h> #include <pcmcia/ss.h> -#include <pcmcia/cs.h> #include "yenta_socket.h" #include "i82365.h" diff --git a/drivers/scsi/pcmcia/aha152x_stub.c b/drivers/scsi/pcmcia/aha152x_stub.c index 61f49bdcc0c2..e77dd02eccdd 100644 --- a/drivers/scsi/pcmcia/aha152x_stub.c +++ b/drivers/scsi/pcmcia/aha152x_stub.c @@ -49,7 +49,6 @@ #include <scsi/scsi_host.h> #include "aha152x.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -86,8 +85,6 @@ static void aha152x_release_cs(struct pcmcia_device *link); static void aha152x_detach(struct pcmcia_device *p_dev); static int aha152x_config_cs(struct pcmcia_device *link); -static struct pcmcia_device *dev_list; - static int aha152x_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -100,11 +97,8 @@ static int aha152x_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x20; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return aha152x_config_cs(link); } /* aha152x_attach */ @@ -123,25 +117,24 @@ static void aha152x_detach(struct pcmcia_device *link) /*====================================================================*/ -static int aha152x_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int aha152x_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; + /* For New Media T&J, look for a SCSI window */ - if (cfg->io.win[0].len >= 0x20) - p_dev->resource[0]->start = cfg->io.win[0].base; - else if ((cfg->io.nwin > 1) && - (cfg->io.win[1].len >= 0x20)) - p_dev->resource[0]->start = cfg->io.win[1].base; - if ((cfg->io.nwin > 0) && - (p_dev->resource[0]->start < 0xffff)) { - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if ((p_dev->resource[0]->end < 0x20) && + (p_dev->resource[1]->end >= 0x20)) + p_dev->resource[0]->start = p_dev->resource[1]->start; + + if (p_dev->resource[0]->start >= 0xffff) + return -EINVAL; + + p_dev->resource[1]->start = p_dev->resource[1]->end = 0; + p_dev->resource[0]->end = 0x20; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; + + return pcmcia_request_io(p_dev); } static int aha152x_config_cs(struct pcmcia_device *link) @@ -160,7 +153,7 @@ static int aha152x_config_cs(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -221,9 +214,7 @@ MODULE_DEVICE_TABLE(pcmcia, aha152x_ids); static struct pcmcia_driver aha152x_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "aha152x_cs", - }, + .name = "aha152x_cs", .probe = aha152x_probe, .remove = aha152x_detach, .id_table = aha152x_ids, @@ -238,7 +229,6 @@ static int __init init_aha152x_cs(void) static void __exit exit_aha152x_cs(void) { pcmcia_unregister_driver(&aha152x_cs_driver); - BUG_ON(dev_list != NULL); } module_init(init_aha152x_cs); diff --git a/drivers/scsi/pcmcia/fdomain_stub.c b/drivers/scsi/pcmcia/fdomain_stub.c index 13dbe5c48492..cd69c2670f81 100644 --- a/drivers/scsi/pcmcia/fdomain_stub.c +++ b/drivers/scsi/pcmcia/fdomain_stub.c @@ -46,7 +46,6 @@ #include <scsi/scsi_host.h> #include "fdomain.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -83,11 +82,8 @@ static int fdomain_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->resource[0]->end = 0x10; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return fdomain_config(link); } /* fdomain_attach */ @@ -105,14 +101,12 @@ static void fdomain_detach(struct pcmcia_device *link) /*====================================================================*/ -static int fdomain_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int fdomain_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; + p_dev->resource[0]->end = 0x10; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; return pcmcia_request_io(p_dev); } @@ -132,7 +126,7 @@ static int fdomain_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -194,9 +188,7 @@ MODULE_DEVICE_TABLE(pcmcia, fdomain_ids); static struct pcmcia_driver fdomain_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "fdomain_cs", - }, + .name = "fdomain_cs", .probe = fdomain_probe, .remove = fdomain_detach, .id_table = fdomain_ids, diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c index dd9b40306f3d..9326c2c14880 100644 --- a/drivers/scsi/pcmcia/nsp_cs.c +++ b/drivers/scsi/pcmcia/nsp_cs.c @@ -47,7 +47,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_ioctl.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -1531,15 +1530,6 @@ static int nsp_eh_host_reset(struct scsi_cmnd *SCpnt) PCMCIA functions **********************************************************************/ -/*====================================================================== - nsp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. -======================================================================*/ static int nsp_cs_probe(struct pcmcia_device *link) { scsi_info_t *info; @@ -1557,14 +1547,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) nsp_dbg(NSP_DEBUG_INIT, "info=0x%p", info); - /* The io structure describes IO port mapping */ - link->resource[0]->end = 0x10; - link->resource[0]->flags = IO_DATA_PATH_WIDTH_AUTO; - - /* General socket configuration */ - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - ret = nsp_cs_config(link); nsp_dbg(NSP_DEBUG_INIT, "link=0x%p", link); @@ -1572,12 +1554,6 @@ static int nsp_cs_probe(struct pcmcia_device *link) } /* nsp_cs_attach */ -/*====================================================================== - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. -======================================================================*/ static void nsp_cs_detach(struct pcmcia_device *link) { nsp_dbg(NSP_DEBUG_INIT, "in, link=0x%p", link); @@ -1590,98 +1566,36 @@ static void nsp_cs_detach(struct pcmcia_device *link) } /* nsp_cs_detach */ -/*====================================================================== - nsp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - ethernet device available to the system. -======================================================================*/ - -struct nsp_cs_configdata { - nsp_hw_data *data; - win_req_t req; -}; - -static int nsp_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int nsp_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - struct nsp_cs_configdata *cfg_mem = priv_data; + nsp_hw_data *data = priv_data; - if (cfg->index == 0) + if (p_dev->config_index == 0) return -ENODEV; - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != cfg->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (vcc != dflt->vcc.param[CISTPL_POWER_VNOM]/10000) - return -ENODEV; - } - - if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM)) { - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = - p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - goto next_entry; - } - - if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) { - cistpl_mem_t *mem = - (cfg->mem.nwin) ? &cfg->mem : &dflt->mem; - cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM; - cfg_mem->req.Attributes |= WIN_ENABLE; - cfg_mem->req.Base = mem->win[0].host_addr; - cfg_mem->req.Size = mem->win[0].len; - if (cfg_mem->req.Size < 0x1000) - cfg_mem->req.Size = 0x1000; - cfg_mem->req.AccessSpeed = 0; - if (pcmcia_request_window(p_dev, &cfg_mem->req, &p_dev->win) != 0) - goto next_entry; - if (pcmcia_map_mem_page(p_dev, p_dev->win, - mem->win[0].card_addr) != 0) - goto next_entry; - - cfg_mem->data->MmioAddress = (unsigned long) ioremap_nocache(cfg_mem->req.Base, cfg_mem->req.Size); - cfg_mem->data->MmioLength = cfg_mem->req.Size; - } - /* If we got this far, we're cool! */ - return 0; + /* This reserves IO space but doesn't actually enable it */ + if (pcmcia_request_io(p_dev) != 0) + goto next_entry; + + if (resource_size(p_dev->resource[2])) { + p_dev->resource[2]->flags |= (WIN_DATA_WIDTH_16 | + WIN_MEMORY_TYPE_CM | + WIN_ENABLE); + if (p_dev->resource[2]->end < 0x1000) + p_dev->resource[2]->end = 0x1000; + if (pcmcia_request_window(p_dev, p_dev->resource[2], 0) != 0) + goto next_entry; + if (pcmcia_map_mem_page(p_dev, p_dev->resource[2], + p_dev->card_addr) != 0) + goto next_entry; + + data->MmioAddress = (unsigned long) + ioremap_nocache(p_dev->resource[2]->start, + resource_size(p_dev->resource[2])); + data->MmioLength = resource_size(p_dev->resource[2]); } + /* If we got this far, we're cool! */ + return 0; next_entry: nsp_dbg(NSP_DEBUG_INIT, "next"); @@ -1693,25 +1607,23 @@ static int nsp_cs_config(struct pcmcia_device *link) { int ret; scsi_info_t *info = link->priv; - struct nsp_cs_configdata *cfg_mem; struct Scsi_Host *host; nsp_hw_data *data = &nsp_data_base; nsp_dbg(NSP_DEBUG_INIT, "in"); - cfg_mem = kzalloc(sizeof(*cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - cfg_mem->data = data; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_CHECK_VCC | + CONF_AUTO_SET_VPP | CONF_AUTO_AUDIO | CONF_AUTO_SET_IOMEM | + CONF_AUTO_SET_IO; - ret = pcmcia_loop_config(link, nsp_cs_config_check, cfg_mem); + ret = pcmcia_loop_config(link, nsp_cs_config_check, data); if (ret) goto cs_failed; if (pcmcia_request_irq(link, nspintr)) goto cs_failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto cs_failed; @@ -1754,41 +1666,16 @@ static int nsp_cs_config(struct pcmcia_device *link) info->host = host; - /* Finally, report what we've done */ - printk(KERN_INFO "nsp_cs: index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) { - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - } - if (link->conf.Attributes & CONF_ENABLE_IRQ) { - printk(", irq %d", link->irq); - } - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - if (link->win) - printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base, - cfg_mem->req.Base+cfg_mem->req.Size-1); - printk("\n"); - - kfree(cfg_mem); return 0; cs_failed: nsp_dbg(NSP_DEBUG_INIT, "config fail"); nsp_cs_release(link); - kfree(cfg_mem); return -ENODEV; } /* nsp_cs_config */ -/*====================================================================== - After a card is removed, nsp_cs_release() will unregister the net - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. -======================================================================*/ static void nsp_cs_release(struct pcmcia_device *link) { scsi_info_t *info = link->priv; @@ -1807,7 +1694,7 @@ static void nsp_cs_release(struct pcmcia_device *link) scsi_remove_host(info->host); } - if (link->win) { + if (resource_size(link->resource[2])) { if (data != NULL) { iounmap((void *)(data->MmioAddress)); } @@ -1877,9 +1764,7 @@ MODULE_DEVICE_TABLE(pcmcia, nsp_cs_ids); static struct pcmcia_driver nsp_driver = { .owner = THIS_MODULE, - .drv = { - .name = "nsp_cs", - }, + .name = "nsp_cs", .probe = nsp_cs_probe, .remove = nsp_cs_detach, .id_table = nsp_cs_ids, @@ -1889,14 +1774,11 @@ static struct pcmcia_driver nsp_driver = { static int __init nsp_cs_init(void) { - nsp_msg(KERN_INFO, "loading..."); - return pcmcia_register_driver(&nsp_driver); } static void __exit nsp_cs_exit(void) { - nsp_msg(KERN_INFO, "unloading..."); pcmcia_unregister_driver(&nsp_driver); } diff --git a/drivers/scsi/pcmcia/qlogic_stub.c b/drivers/scsi/pcmcia/qlogic_stub.c index eb775f1a523c..9c96ca889ec9 100644 --- a/drivers/scsi/pcmcia/qlogic_stub.c +++ b/drivers/scsi/pcmcia/qlogic_stub.c @@ -48,7 +48,6 @@ #include <scsi/scsi_host.h> #include "../qlogicfas408.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -156,11 +155,8 @@ static int qlogic_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + link->config_regs = PRESENT_OPTION; return qlogic_config(link); } /* qlogic_attach */ @@ -178,15 +174,11 @@ static void qlogic_detach(struct pcmcia_device *link) /*====================================================================*/ -static int qlogic_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int qlogic_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; @@ -209,7 +201,7 @@ static int qlogic_config(struct pcmcia_device * link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -264,7 +256,7 @@ static int qlogic_resume(struct pcmcia_device *link) { scsi_info_t *info = link->priv; - pcmcia_request_configuration(link, &link->conf); + pcmcia_enable_device(link); if ((info->manf_id == MANFID_MACNICA) || (info->manf_id == MANFID_PIONEER) || (info->manf_id == 0x0098)) { @@ -302,9 +294,7 @@ MODULE_DEVICE_TABLE(pcmcia, qlogic_ids); static struct pcmcia_driver qlogic_cs_driver = { .owner = THIS_MODULE, - .drv = { .name = "qlogic_cs", - }, .probe = qlogic_probe, .remove = qlogic_detach, .id_table = qlogic_ids, diff --git a/drivers/scsi/pcmcia/sym53c500_cs.c b/drivers/scsi/pcmcia/sym53c500_cs.c index 321e390c9120..0ae27cb5cd6f 100644 --- a/drivers/scsi/pcmcia/sym53c500_cs.c +++ b/drivers/scsi/pcmcia/sym53c500_cs.c @@ -71,7 +71,6 @@ #include <scsi/scsi.h> #include <scsi/scsi_host.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> #include <pcmcia/ciscode.h> @@ -684,15 +683,11 @@ static struct scsi_host_template sym53c500_driver_template = { .shost_attrs = SYM53C500_shost_attrs }; -static int SYM53C500_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int SYM53C500_config_check(struct pcmcia_device *p_dev, void *priv_data) { p_dev->io_lines = 10; - p_dev->resource[0]->start = cfg->io.win[0].base; - p_dev->resource[0]->end = cfg->io.win[0].len; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; if (p_dev->resource[0]->start == 0) return -ENODEV; @@ -721,7 +716,7 @@ SYM53C500_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; @@ -859,10 +854,7 @@ SYM53C500_probe(struct pcmcia_device *link) return -ENOMEM; info->p_dev = link; link->priv = info; - link->resource[0]->end = 16; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; return SYM53C500_config(link); } /* SYM53C500_attach */ @@ -881,9 +873,7 @@ MODULE_DEVICE_TABLE(pcmcia, sym53c500_ids); static struct pcmcia_driver sym53c500_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sym53c500_cs", - }, + .name = "sym53c500_cs", .probe = SYM53C500_probe, .remove = SYM53C500_detach, .id_table = sym53c500_ids, diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c index 7d475b2a79e8..93760b2ea172 100644 --- a/drivers/serial/serial_cs.c +++ b/drivers/serial/serial_cs.c @@ -45,7 +45,6 @@ #include <asm/io.h> #include <asm/system.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> @@ -183,10 +182,8 @@ static void quirk_config_socket(struct pcmcia_device *link) { struct serial_info *info = link->priv; - if (info->multi) { - link->conf.Present |= PRESENT_EXT_STATUS; - link->conf.ExtStatus = ESR_REQ_ATTN_ENA; - } + if (info->multi) + link->config_flags |= CONF_ENABLE_ESR; } static const struct serial_quirk quirks[] = { @@ -265,13 +262,6 @@ static const struct serial_quirk quirks[] = { static int serial_config(struct pcmcia_device * link); -/*====================================================================== - - After a card is removed, serial_remove() will unregister - the serial device(s), and release the PCMCIA configuration. - -======================================================================*/ - static void serial_remove(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -314,14 +304,6 @@ static int serial_resume(struct pcmcia_device *link) return 0; } -/*====================================================================== - - serial_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - -======================================================================*/ - static int serial_probe(struct pcmcia_device *link) { struct serial_info *info; @@ -335,25 +317,13 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->conf.Attributes = CONF_ENABLE_IRQ; - if (do_sound) { - link->conf.Attributes |= CONF_ENABLE_SPKR; - link->conf.Status = CCSR_AUDIO_ENA; - } - link->conf.IntType = INT_MEMORY_AND_IO; + link->config_flags |= CONF_ENABLE_IRQ; + if (do_sound) + link->config_flags |= CONF_ENABLE_SPKR; return serial_config(link); } -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void serial_detach(struct pcmcia_device *link) { struct serial_info *info = link->priv; @@ -361,11 +331,6 @@ static void serial_detach(struct pcmcia_device *link) dev_dbg(&link->dev, "serial_detach\n"); /* - * Ensure any outstanding scheduled tasks are completed. - */ - flush_scheduled_work(); - - /* * Ensure that the ports have been released. */ serial_remove(link); @@ -430,47 +395,45 @@ static int pfc_config(struct pcmcia_device *p_dev) return -ENODEV; } -static int simple_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int simple_config_check(struct pcmcia_device *p_dev, void *priv_data) { static const int size_table[2] = { 8, 16 }; int *try = priv_data; - if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if (p_dev->resource[0]->start == 0) + return -ENODEV; - p_dev->io_lines = ((*try & 0x1) == 0) ? - 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + if ((*try & 0x1) == 0) + p_dev->io_lines = 16; - if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)]) - && (cf->io.win[0].base != 0)) { - p_dev->resource[0]->start = cf->io.win[0].base; - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -EINVAL; + if (p_dev->resource[0]->end != size_table[(*try >> 1)]) + return -ENODEV; + + p_dev->resource[0]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + return pcmcia_request_io(p_dev); } static int simple_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; int j; - if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { - for (j = 0; j < 5; j++) { - p_dev->resource[0]->start = base[j]; - p_dev->io_lines = base[j] ? 16 : 3; - if (!pcmcia_request_io(p_dev)) - return 0; - } + if (p_dev->io_lines > 3) + return -ENODEV; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = 8; + + for (j = 0; j < 5; j++) { + p_dev->resource[0]->start = base[j]; + p_dev->io_lines = base[j] ? 16 : 3; + if (!pcmcia_request_io(p_dev)) + return 0; } return -ENODEV; } @@ -480,11 +443,9 @@ static int simple_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i = -ENODEV, try; - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = 8; - /* First pass: look for a config entry that looks normal. * Two tries: without IO aliases, then with aliases */ + link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; @@ -500,7 +461,7 @@ static int simple_config(struct pcmcia_device *link) found_port: if (info->multi && (info->manfid == MANFID_3COM)) - link->conf.ConfigIndex &= ~(0x08); + link->config_index &= ~(0x08); /* * Apply any configuration quirks. @@ -508,51 +469,50 @@ found_port: if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -1; return setup_serial(link, info, link->resource[0]->start, link->irq); } -static int multi_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int multi_config_check(struct pcmcia_device *p_dev, void *priv_data) { - int *base2 = priv_data; + int *multi = priv_data; + + if (p_dev->resource[1]->end) + return -EINVAL; /* The quad port cards have bad CIS's, so just look for a window larger than 8 ports and assume it will be right */ - if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[0]->start + 8; - return 0; - } - } - return -ENODEV; + if (p_dev->resource[0]->end <= 8) + return -EINVAL; + + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[0]->end = *multi * 8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + return 0; } static int multi_config_check_notpicky(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { int *base2 = priv_data; - if (cf->io.nwin == 2) { - p_dev->resource[0]->start = cf->io.win[0].base; - p_dev->resource[1]->start = cf->io.win[1].base; - p_dev->io_lines = cf->io.flags & CISTPL_IO_LINES_MASK; - if (!pcmcia_request_io(p_dev)) { - *base2 = p_dev->resource[1]->start; - return 0; - } - } - return -ENODEV; + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + return -ENODEV; + + p_dev->resource[0]->end = p_dev->resource[1]->end = 8; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + + if (pcmcia_request_io(p_dev)) + return -ENODEV; + + *base2 = p_dev->resource[0]->start + 8; + return 0; } static int multi_config(struct pcmcia_device *link) @@ -560,12 +520,12 @@ static int multi_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i, base2 = 0; + link->config_flags |= CONF_AUTO_SET_IO; /* First, look for a generic full-sized window */ - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - link->resource[0]->end = info->multi * 8; - if (pcmcia_loop_config(link, multi_config_check, &base2)) { + if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) + base2 = link->resource[0]->start + 8; + else { /* If that didn't work, look for two windows */ - link->resource[0]->end = link->resource[1]->end = 8; info->multi = 2; if (pcmcia_loop_config(link, multi_config_check_notpicky, &base2)) { @@ -584,7 +544,7 @@ static int multi_config(struct pcmcia_device *link) if (info->quirk && info->quirk->config) info->quirk->config(link); - i = pcmcia_request_configuration(link, &link->conf); + i = pcmcia_enable_device(link); if (i != 0) return -ENODEV; @@ -596,11 +556,11 @@ static int multi_config(struct pcmcia_device *link) info->prodid == PRODID_POSSIO_GCC)) { int err; - if (link->conf.ConfigIndex == 1 || - link->conf.ConfigIndex == 3) { + if (link->config_index == 1 || + link->config_index == 3) { err = setup_serial(link, info, base2, link->irq); - base2 = link->resource[0]->start;; + base2 = link->resource[0]->start; } else { err = setup_serial(link, info, link->resource[0]->start, link->irq); @@ -624,33 +584,24 @@ static int multi_config(struct pcmcia_device *link) return 0; } -static int serial_check_for_multi(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cf, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int serial_check_for_multi(struct pcmcia_device *p_dev, void *priv_data) { struct serial_info *info = p_dev->priv; - if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) - info->multi = cf->io.win[0].len >> 3; + if (!p_dev->resource[0]->end) + return -EINVAL; + + if ((!p_dev->resource[1]->end) && (p_dev->resource[0]->end % 8 == 0)) + info->multi = p_dev->resource[0]->end >> 3; - if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && - (cf->io.win[1].len == 8)) + if ((p_dev->resource[1]->end) && (p_dev->resource[0]->end == 8) + && (p_dev->resource[1]->end == 8)) info->multi = 2; return 0; /* break */ } -/*====================================================================== - - serial_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - serial device available to the system. - -======================================================================*/ - static int serial_config(struct pcmcia_device * link) { struct serial_info *info = link->priv; @@ -894,9 +845,7 @@ MODULE_FIRMWARE("cis/RS-COM-2P.cis"); static struct pcmcia_driver serial_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "serial_cs", - }, + .name = "serial_cs", .probe = serial_probe, .remove = serial_detach, .id_table = serial_ids, diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7892ac163522..c68b3dc19e11 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -20,7 +20,6 @@ #include <linux/mmc/sdio_func.h> #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/pcmcia.c b/drivers/ssb/pcmcia.c index 526682d68de8..c7345dbf43fa 100644 --- a/drivers/ssb/pcmcia.c +++ b/drivers/ssb/pcmcia.c @@ -13,7 +13,6 @@ #include <linux/io.h> #include <linux/etherdevice.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ciscode.h> #include <pcmcia/ds.h> diff --git a/drivers/ssb/scan.c b/drivers/ssb/scan.c index 9738cad4ba13..ee079ab9fb28 100644 --- a/drivers/ssb/scan.c +++ b/drivers/ssb/scan.c @@ -17,7 +17,6 @@ #include <linux/pci.h> #include <linux/io.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> diff --git a/drivers/staging/comedi/drivers/cb_das16_cs.c b/drivers/staging/comedi/drivers/cb_das16_cs.c index f8ede1182ccc..0345b4caba73 100644 --- a/drivers/staging/comedi/drivers/cb_das16_cs.c +++ b/drivers/staging/comedi/drivers/cb_das16_cs.c @@ -37,7 +37,6 @@ Status: experimental #include <linux/delay.h> #include <linux/pci.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -692,10 +691,6 @@ static int das16cs_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* Initialize the pcmcia_device structure */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das16cs_pcmcia_config(link); @@ -715,37 +710,12 @@ static void das16cs_pcmcia_detach(struct pcmcia_device *link) static int das16cs_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) + if (p_dev->config_index == 0) return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - - return 0; + return pcmcia_request_io(p_dev); } static void das16cs_pcmcia_config(struct pcmcia_device *link) @@ -754,6 +724,9 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das16cs_pcmcia_config\n"); + /* Do we need to allocate an interrupt? */ + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das16cs_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -763,25 +736,10 @@ static void das16cs_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(", io %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -832,9 +790,7 @@ struct pcmcia_driver das16cs_driver = { .resume = das16cs_pcmcia_resume, .id_table = das16cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "cb_das16_cs", - }, + .name = "cb_das16_cs", }; static int __init init_das16cs_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/das08_cs.c b/drivers/staging/comedi/drivers/das08_cs.c index 48d9fb1227df..0b32a2df7768 100644 --- a/drivers/staging/comedi/drivers/das08_cs.c +++ b/drivers/staging/comedi/drivers/das08_cs.c @@ -48,7 +48,6 @@ Command support does not exist, but could be added for this board. #include "das08.h" /* pcmcia includes */ -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -115,40 +114,15 @@ static void das08_pcmcia_release(struct pcmcia_device *link); static int das08_pcmcia_suspend(struct pcmcia_device *p_dev); static int das08_pcmcia_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int das08_pcmcia_attach(struct pcmcia_device *); static void das08_pcmcia_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - das08_pcmcia_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int das08_pcmcia_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -162,16 +136,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; das08_pcmcia_config(link); @@ -179,15 +143,6 @@ static int das08_pcmcia_attach(struct pcmcia_device *link) return 0; } /* das08_pcmcia_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void das08_pcmcia_detach(struct pcmcia_device *link) { @@ -203,46 +158,13 @@ static void das08_pcmcia_detach(struct pcmcia_device *link) static int das08_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - return pcmcia_request_io(p_dev); - } - return 0; -} - - -/*====================================================================== - - das08_pcmcia_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. + if (p_dev->config_index == 0) + return -EINVAL; -======================================================================*/ + return pcmcia_request_io(p_dev); +} static void das08_pcmcia_config(struct pcmcia_device *link) { @@ -250,6 +172,8 @@ static void das08_pcmcia_config(struct pcmcia_device *link) dev_dbg(&link->dev, "das08_pcmcia_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, das08_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -259,25 +183,10 @@ static void das08_pcmcia_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -285,32 +194,12 @@ failed: } /* das08_pcmcia_config */ -/*====================================================================== - - After a card is removed, das08_pcmcia_release() will unregister the - device, and release the PCMCIA configuration. If the device is - still open, this will be postponed until it is closed. - -======================================================================*/ - static void das08_pcmcia_release(struct pcmcia_device *link) { dev_dbg(&link->dev, "das08_pcmcia_release\n"); pcmcia_disable_device(link); } /* das08_pcmcia_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int das08_pcmcia_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -348,9 +237,7 @@ struct pcmcia_driver das08_cs_driver = { .resume = das08_pcmcia_resume, .id_table = das08_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "pcm-das08", - }, + .name = "pcm-das08", }; static int __init init_das08_pcmcia_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_700.c b/drivers/staging/comedi/drivers/ni_daq_700.c index cc15666e5cc1..fc772a8a55c6 100644 --- a/drivers/staging/comedi/drivers/ni_daq_700.c +++ b/drivers/staging/comedi/drivers/ni_daq_700.c @@ -47,7 +47,6 @@ IRQ is assigned but not used. #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -435,47 +434,20 @@ static int dio700_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words, please! */ - static void dio700_config(struct pcmcia_device *link); static void dio700_release(struct pcmcia_device *link); static int dio700_cs_suspend(struct pcmcia_device *p_dev); static int dio700_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio700_cs_attach(struct pcmcia_device *); static void dio700_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio700_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio700_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -491,16 +463,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio700_config(link); @@ -508,15 +470,6 @@ static int dio700_cs_attach(struct pcmcia_device *link) return 0; } /* dio700_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio700_cs_detach(struct pcmcia_device *link) { @@ -532,54 +485,13 @@ static void dio700_cs_detach(struct pcmcia_device *link) } /* dio700_cs_detach */ -/*====================================================================== - - dio700_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio700_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio700_config(struct pcmcia_device *link) @@ -591,6 +503,9 @@ static void dio700_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio700_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio700_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -600,25 +515,10 @@ static void dio700_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(", io %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -634,18 +534,6 @@ static void dio700_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio700_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio700_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -685,9 +573,7 @@ struct pcmcia_driver dio700_cs_driver = { .resume = dio700_cs_resume, .id_table = dio700_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_700", - }, + .name = "ni_daq_700", }; static int __init init_dio700_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_daq_dio24.c b/drivers/staging/comedi/drivers/ni_daq_dio24.c index 773ae2044e0e..c9c28584db67 100644 --- a/drivers/staging/comedi/drivers/ni_daq_dio24.c +++ b/drivers/staging/comedi/drivers/ni_daq_dio24.c @@ -48,7 +48,6 @@ the PCMCIA interface. #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -187,47 +186,20 @@ static int dio24_detach(struct comedi_device *dev) return 0; }; -/* PCMCIA crap -- watch your words! */ - static void dio24_config(struct pcmcia_device *link); static void dio24_release(struct pcmcia_device *link); static int dio24_cs_suspend(struct pcmcia_device *p_dev); static int dio24_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int dio24_cs_attach(struct pcmcia_device *); static void dio24_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - dio24_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int dio24_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -243,16 +215,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; dio24_config(link); @@ -260,15 +222,6 @@ static int dio24_cs_attach(struct pcmcia_device *link) return 0; } /* dio24_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void dio24_cs_detach(struct pcmcia_device *link) { @@ -284,54 +237,13 @@ static void dio24_cs_detach(struct pcmcia_device *link) } /* dio24_cs_detach */ -/*====================================================================== - - dio24_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int dio24_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } static void dio24_config(struct pcmcia_device *link) @@ -342,6 +254,9 @@ static void dio24_config(struct pcmcia_device *link) dev_dbg(&link->dev, "dio24_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_AUDIO | + CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, dio24_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -351,25 +266,10 @@ static void dio24_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -385,18 +285,6 @@ static void dio24_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* dio24_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int dio24_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -435,9 +323,7 @@ struct pcmcia_driver dio24_cs_driver = { .resume = dio24_cs_resume, .id_table = dio24_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_daq_dio24", - }, + .name = "ni_daq_dio24", }; static int __init init_dio24_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_labpc_cs.c b/drivers/staging/comedi/drivers/ni_labpc_cs.c index 68c4ecbd93ae..6facbc8bf776 100644 --- a/drivers/staging/comedi/drivers/ni_labpc_cs.c +++ b/drivers/staging/comedi/drivers/ni_labpc_cs.c @@ -71,7 +71,6 @@ NI manuals: #include "comedi_fc.h" #include "ni_labpc.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -153,59 +152,20 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it) return labpc_common_attach(dev, iobase, irq, 0); } -/*====================================================================*/ - -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. They are invoked from the dummy - event handler. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void labpc_config(struct pcmcia_device *link); static void labpc_release(struct pcmcia_device *link); static int labpc_cs_suspend(struct pcmcia_device *p_dev); static int labpc_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int labpc_cs_attach(struct pcmcia_device *); static void labpc_cs_detach(struct pcmcia_device *); -/* - You'll also need to prototype all the functions that will actually - be used to talk to your device. See 'memory_cs' for a good example - of a fully self-sufficient driver; the other drivers rely more or - less on other parts of the kernel. -*/ - struct local_info_t { struct pcmcia_device *link; int stop; struct bus_operations *bus; }; -/*====================================================================== - - labpc_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int labpc_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -219,16 +179,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - pcmcia_cur_dev = link; labpc_config(link); @@ -236,15 +186,6 @@ static int labpc_cs_attach(struct pcmcia_device *link) return 0; } /* labpc_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void labpc_cs_detach(struct pcmcia_device *link) { dev_dbg(&link->dev, "labpc_cs_detach\n"); @@ -263,54 +204,13 @@ static void labpc_cs_detach(struct pcmcia_device *link) } /* labpc_cs_detach */ -/*====================================================================== - - labpc_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - static int labpc_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Does this card need audio output? */ - if (cfg->flags & CISTPL_CFTABLE_AUDIO) { - p_dev->conf.Attributes |= CONF_ENABLE_SPKR; - p_dev->conf.Status = CCSR_AUDIO_ENA; - } - - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - /* This reserves IO space but doesn't actually enable it */ - if (pcmcia_request_io(p_dev) != 0) - return -ENODEV; - } + if (p_dev->config_index == 0) + return -EINVAL; - /* If we got this far, we're cool! */ - return 0; + return pcmcia_request_io(p_dev); } @@ -320,6 +220,9 @@ static void labpc_config(struct pcmcia_device *link) dev_dbg(&link->dev, "labpc_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_ENABLE_PULSE_IRQ | + CONF_AUTO_AUDIO | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, labpc_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -329,25 +232,10 @@ static void labpc_config(struct pcmcia_device *link) if (!link->irq) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %d", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -362,18 +250,6 @@ static void labpc_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* labpc_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int labpc_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -391,8 +267,6 @@ static int labpc_cs_resume(struct pcmcia_device *link) return 0; } /* labpc_cs_resume */ -/*====================================================================*/ - static struct pcmcia_device_id labpc_cs_ids[] = { /* N.B. These IDs should match those in labpc_cs_boards (ni_labpc.c) */ PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0103), /* daqcard-1200 */ @@ -411,9 +285,7 @@ struct pcmcia_driver labpc_cs_driver = { .resume = labpc_cs_resume, .id_table = labpc_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "daqcard-1200", - }, + .name = "daqcard-1200", }; static int __init init_labpc_cs(void) diff --git a/drivers/staging/comedi/drivers/ni_mio_cs.c b/drivers/staging/comedi/drivers/ni_mio_cs.c index 1f2426352eb5..49563273f605 100644 --- a/drivers/staging/comedi/drivers/ni_mio_cs.c +++ b/drivers/staging/comedi/drivers/ni_mio_cs.c @@ -48,7 +48,6 @@ See the notes in the ni_atmio.o driver. #include "ni_stc.h" #include "8255.h" -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -263,11 +262,6 @@ static struct pcmcia_device *cur_dev = NULL; static int cs_attach(struct pcmcia_device *link) { - link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; - link->resource[0]->end = 16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - cur_dev = link; mio_cs_config(link); @@ -301,16 +295,12 @@ static int mio_cs_resume(struct pcmcia_device *link) } -static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int mio_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { int base, ret; - p_dev->resource[0]->end = cfg->io.win[0].len; - p_dev->io_lines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16; for (base = 0x000; base < 0x400; base += 0x20) { p_dev->resource[0]->start = base; @@ -327,6 +317,7 @@ static void mio_cs_config(struct pcmcia_device *link) int ret; DPRINTK("mio_cs_config(link=%p)\n", link); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; ret = pcmcia_loop_config(link, mio_pcmcia_config_loop, NULL); if (ret) { @@ -337,7 +328,7 @@ static void mio_cs_config(struct pcmcia_device *link) if (!link->irq) dev_info(&link->dev, "no IRQ available\n"); - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); } static int mio_cs_attach(struct comedi_device *dev, struct comedi_devconfig *it) @@ -446,9 +437,7 @@ struct pcmcia_driver ni_mio_cs_driver = { .resume = &mio_cs_resume, .id_table = ni_mio_cs_ids, .owner = THIS_MODULE, - .drv = { - .name = "ni_mio_cs", - }, + .name = "ni_mio_cs", }; int init_module(void) diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c index bf489d7f4990..ebba9bb47777 100644 --- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c +++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c @@ -50,7 +50,6 @@ Devices: [Quatech] DAQP-208 (daqp), DAQP-308 #include "../comedidev.h" #include <linux/semaphore.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -969,43 +968,14 @@ static int daqp_detach(struct comedi_device *dev) ======================================================================*/ -/* - The event() function is this driver's Card Services event handler. - It will be called by Card Services when an appropriate card status - event is received. The config() and release() entry points are - used to configure or release a socket, in response to card - insertion and ejection events. - - Kernel version 2.6.16 upwards uses suspend() and resume() functions - instead of an event() function. -*/ - static void daqp_cs_config(struct pcmcia_device *link); static void daqp_cs_release(struct pcmcia_device *link); static int daqp_cs_suspend(struct pcmcia_device *p_dev); static int daqp_cs_resume(struct pcmcia_device *p_dev); -/* - The attach() and detach() entry points are used to create and destroy - "instances" of the driver, where each instance represents everything - needed to manage one actual PCMCIA card. -*/ - static int daqp_cs_attach(struct pcmcia_device *); static void daqp_cs_detach(struct pcmcia_device *); -/*====================================================================== - - daqp_cs_attach() creates an "instance" of the driver, allocating - local data structures for one device. The device is registered - with Card Services. - - The dev_link structure is initialized, but we don't actually - configure the card at this point -- we wait until we receive a - card insertion event. - -======================================================================*/ - static int daqp_cs_attach(struct pcmcia_device *link) { struct local_info_t *local; @@ -1031,30 +1001,11 @@ static int daqp_cs_attach(struct pcmcia_device *link) local->link = link; link->priv = local; - /* - General socket configuration defaults can go here. In this - client, we assume very little, and rely on the CIS for almost - everything. In most clients, many details (i.e., number, sizes, - and attributes of IO windows) are fixed by the nature of the - device, and can be hard-wired here. - */ - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - daqp_cs_config(link); return 0; } /* daqp_cs_attach */ -/*====================================================================== - - This deletes a driver "instance". The device is de-registered - with Card Services. If it has been released, all local data - structures are freed. Otherwise, the structures will be freed - when the device is released. - -======================================================================*/ - static void daqp_cs_detach(struct pcmcia_device *link) { struct local_info_t *dev = link->priv; @@ -1070,45 +1021,11 @@ static void daqp_cs_detach(struct pcmcia_device *link) } /* daqp_cs_detach */ -/*====================================================================== - - daqp_cs_config() is scheduled to run after a CARD_INSERTION event - is received, to configure the PCMCIA socket, and to make the - device available to the system. - -======================================================================*/ - - -static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int daqp_pcmcia_config_loop(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; - /* Do we need to allocate an interrupt? */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; - p_dev->resource[0]->flags |= - pcmcia_io_cfg_data_width(io->flags); - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - if (io->nwin > 1) { - p_dev->resource[1]->flags = p_dev->resource[0]->flags; - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - } - - /* This reserves IO space but doesn't actually enable it */ return pcmcia_request_io(p_dev); } @@ -1118,6 +1035,8 @@ static void daqp_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "daqp_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; + ret = pcmcia_loop_config(link, daqp_pcmcia_config_loop, NULL); if (ret) { dev_warn(&link->dev, "no configuration found\n"); @@ -1128,25 +1047,10 @@ static void daqp_cs_config(struct pcmcia_device *link) if (ret) goto failed; - /* - This actually configures the PCMCIA socket -- setting up - the I/O windows and the interrupt mapping, and putting the - card and host interface into "Memory and IO" mode. - */ - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - /* Finally, report what we've done */ - dev_info(&link->dev, "index 0x%02x", link->conf.ConfigIndex); - if (link->conf.Attributes & CONF_ENABLE_IRQ) - printk(", irq %u", link->irq); - if (link->resource[0]) - printk(" & %pR", link->resource[0]); - if (link->resource[1]) - printk(" & %pR", link->resource[1]); - printk("\n"); - return; failed: @@ -1161,18 +1065,6 @@ static void daqp_cs_release(struct pcmcia_device *link) pcmcia_disable_device(link); } /* daqp_cs_release */ -/*====================================================================== - - The card status event handler. Mostly, this schedules other - stuff to run after an event is received. - - When a CARD_REMOVAL event is received, we immediately set a - private flag to block future accesses to this device. All the - functions that actually access the device should check this flag - to make sure the card is still present. - -======================================================================*/ - static int daqp_cs_suspend(struct pcmcia_device *link) { struct local_info_t *local = link->priv; @@ -1212,9 +1104,7 @@ static struct pcmcia_driver daqp_cs_driver = { .resume = daqp_cs_resume, .id_table = daqp_cs_id_table, .owner = THIS_MODULE, - .drv = { - .name = "quatech_daqp_cs", - }, + .name = "quatech_daqp_cs", }; int __init init_module(void) diff --git a/drivers/staging/wlags49_h2/wl_cs.c b/drivers/staging/wlags49_h2/wl_cs.c index 19c335458653..6555891e149c 100644 --- a/drivers/staging/wlags49_h2/wl_cs.c +++ b/drivers/staging/wlags49_h2/wl_cs.c @@ -83,7 +83,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> @@ -147,10 +146,9 @@ static int wl_adapter_attach(struct pcmcia_device *link) link->resource[0]->end = HCF_NUM_IO_PORTS; link->resource[0]->flags= IO_DATA_PATH_WIDTH_16; - link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.IntType = INT_MEMORY_AND_IO; - link->conf.ConfigIndex = 5; - link->conf.Present = PRESENT_OPTION; + link->config_flags |= CONF_ENABLE_IRQ; + link->config_index = 5; + link->config_regs = PRESENT_OPTION; link->priv = dev; lp = wl_priv(dev); @@ -165,27 +163,6 @@ static int wl_adapter_attach(struct pcmcia_device *link) -/******************************************************************************* - * wl_adapter_detach() - ******************************************************************************* - * - * DESCRIPTION: - * - * This deletes a driver "instance". The device is de-registered with Card - * Services. If it has been released, then the net device is unregistered, and - * all local data structures are freed. Otherwise, the structures will be - * freed when the device is released. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * detach - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ static void wl_adapter_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; @@ -209,26 +186,6 @@ static void wl_adapter_detach(struct pcmcia_device *link) /*============================================================================*/ -/******************************************************************************* - * wl_adapter_release() - ******************************************************************************* - * - * DESCRIPTION: - * - * After a card is removed, this routine will release the PCMCIA - * configuration. If the device is still open, this will be postponed until it - * is closed. - * - * PARAMETERS: - * - * arg - a u_long representing a pointer to a dev_link_t structure for the - * device to be released. - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_release(struct pcmcia_device *link) { DBG_FUNC("wl_adapter_release"); @@ -268,26 +225,6 @@ static int wl_adapter_resume(struct pcmcia_device *link) return 0; } /* wl_adapter_resume */ -/******************************************************************************* - * wl_adapter_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_adapter_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * link - pointer to the dev_link_t structure representing the device to - * insert - * - * RETURNS: - * - * N/A - * - ******************************************************************************/ void wl_adapter_insert(struct pcmcia_device *link) { struct net_device *dev; @@ -302,7 +239,7 @@ void wl_adapter_insert(struct pcmcia_device *link) dev = link->priv; /* Do we need to allocate an interrupt? */ - link->conf.Attributes |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ; link->io_lines = 6; ret = pcmcia_request_io(link); @@ -313,7 +250,7 @@ void wl_adapter_insert(struct pcmcia_device *link) if (ret != 0) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret != 0) goto failed; @@ -457,9 +394,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl_adapter_ids); static struct pcmcia_driver wlags49_driver = { .owner = THIS_MODULE, - .drv = { - .name = DRIVER_NAME, - }, + .name = DRIVER_NAME, .probe = wl_adapter_attach, .remove = wl_adapter_detach, .id_table = wl_adapter_ids, diff --git a/drivers/staging/wlags49_h2/wl_internal.h b/drivers/staging/wlags49_h2/wl_internal.h index 02f0a20e178a..cd129b3ee6c0 100644 --- a/drivers/staging/wlags49_h2/wl_internal.h +++ b/drivers/staging/wlags49_h2/wl_internal.h @@ -69,7 +69,6 @@ ******************************************************************************/ #include <linux/version.h> #ifdef BUS_PCMCIA -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ciscode.h> diff --git a/drivers/staging/wlags49_h2/wl_main.c b/drivers/staging/wlags49_h2/wl_main.c index 88d0d472142f..8e3536acbf46 100644 --- a/drivers/staging/wlags49_h2/wl_main.c +++ b/drivers/staging/wlags49_h2/wl_main.c @@ -414,25 +414,6 @@ extern memimage fw_image; // firmware image to be downloaded #endif /* HCF_STA */ -/******************************************************************************* - * wl_insert() - ******************************************************************************* - * - * DESCRIPTION: - * - * wl_insert() is scheduled to run after a CARD_INSERTION event is - * received, to configure the PCMCIA socket, and to make the ethernet device - * available to the system. - * - * PARAMETERS: - * - * dev - a pointer to the net_device struct of the wireless device - * - * RETURNS: - * - * TRUE or FALSE - * - ******************************************************************************/ int wl_insert( struct net_device *dev ) { int result = 0; diff --git a/drivers/telephony/ixj_pcmcia.c b/drivers/telephony/ixj_pcmcia.c index a1900e502518..d005b9eeebbc 100644 --- a/drivers/telephony/ixj_pcmcia.c +++ b/drivers/telephony/ixj_pcmcia.c @@ -8,7 +8,6 @@ #include <linux/errno.h> /* error codes */ #include <linux/slab.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/ds.h> @@ -32,9 +31,6 @@ static int ixj_probe(struct pcmcia_device *p_dev) { dev_dbg(&p_dev->dev, "ixj_attach()\n"); /* Create new ixj device */ - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->conf.IntType = INT_MEMORY_AND_IO; p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL); if (!p_dev->priv) { return -ENOMEM; @@ -111,40 +107,31 @@ failed: return; } -static int ixj_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int ixj_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - p_dev->io_lines = 3; - if (io->nwin == 2) { - p_dev->resource[1]->start = io->win[1].base; - p_dev->resource[1]->end = io->win[1].len; - } - if (!pcmcia_request_io(p_dev)) - return 0; - } - return -ENODEV; + p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; + p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; + p_dev->io_lines = 3; + + return pcmcia_request_io(p_dev); } static int ixj_config(struct pcmcia_device * link) { IXJ *j; ixj_info_t *info; - cistpl_cftable_entry_t dflt = { 0 }; info = link->priv; dev_dbg(&link->dev, "ixj_config\n"); - if (pcmcia_loop_config(link, ixj_config_check, &dflt)) + link->config_flags = CONF_AUTO_SET_IO; + + if (pcmcia_loop_config(link, ixj_config_check, NULL)) goto failed; - if (pcmcia_request_configuration(link, &link->conf)) + if (pcmcia_enable_device(link)) goto failed; /* @@ -178,9 +165,7 @@ MODULE_DEVICE_TABLE(pcmcia, ixj_ids); static struct pcmcia_driver ixj_driver = { .owner = THIS_MODULE, - .drv = { - .name = "ixj_cs", - }, + .name = "ixj_cs", .probe = ixj_probe, .remove = ixj_detach, .id_table = ixj_ids, diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 0e13a00eb2ed..3775c035a6c5 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -20,7 +20,6 @@ #include <linux/ioport.h> #include <linux/platform_device.h> -#include <pcmcia/cs.h> #include <pcmcia/cistpl.h> #include <pcmcia/cisreg.h> #include <pcmcia/ds.h> @@ -132,49 +131,12 @@ static void sl811_cs_release(struct pcmcia_device * link) platform_device_unregister(&platform_dev); } -static int sl811_cs_config_check(struct pcmcia_device *p_dev, - cistpl_cftable_entry_t *cfg, - cistpl_cftable_entry_t *dflt, - unsigned int vcc, - void *priv_data) +static int sl811_cs_config_check(struct pcmcia_device *p_dev, void *priv_data) { - if (cfg->index == 0) - return -ENODEV; - - /* Use power settings for Vcc and Vpp if present */ - /* Note that the CIS values need to be rescaled */ - if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) - return -ENODEV; - } else if (dflt->vcc.present & (1<<CISTPL_POWER_VNOM)) { - if (dflt->vcc.param[CISTPL_POWER_VNOM]/10000 != vcc) - return -ENODEV; - } - - if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - cfg->vpp1.param[CISTPL_POWER_VNOM]/10000; - else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM)) - p_dev->conf.Vpp = - dflt->vpp1.param[CISTPL_POWER_VNOM]/10000; - - /* we need an interrupt */ - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - p_dev->resource[0]->end = p_dev->resource[1]->end = 0; - if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io; - p_dev->io_lines = io->flags & CISTPL_IO_LINES_MASK; - - p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8; - p_dev->resource[0]->start = io->win[0].base; - p_dev->resource[0]->end = io->win[0].len; - - return pcmcia_request_io(p_dev); - } - pcmcia_disable_device(p_dev); - return -ENODEV; + if (p_dev->config_index == 0) + return -EINVAL; + + return pcmcia_request_io(p_dev); } @@ -185,6 +147,9 @@ static int sl811_cs_config(struct pcmcia_device *link) dev_dbg(&link->dev, "sl811_cs_config\n"); + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP | + CONF_AUTO_CHECK_VCC | CONF_AUTO_SET_IO; + if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) goto failed; @@ -195,18 +160,10 @@ static int sl811_cs_config(struct pcmcia_device *link) if (!link->irq) goto failed; - ret = pcmcia_request_configuration(link, &link->conf); + ret = pcmcia_enable_device(link); if (ret) goto failed; - dev_info(&link->dev, "index 0x%02x: ", - link->conf.ConfigIndex); - if (link->conf.Vpp) - printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10); - printk(", irq %d", link->irq); - printk(", io %pR", link->resource[0]); - printk("\n"); - if (sl811_hc_init(parent, link->resource[0]->start, link->irq) < 0) { failed: @@ -227,9 +184,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) local->p_dev = link; link->priv = local; - link->conf.Attributes = 0; - link->conf.IntType = INT_MEMORY_AND_IO; - return sl811_cs_config(link); } @@ -241,9 +195,7 @@ MODULE_DEVICE_TABLE(pcmcia, sl811_ids); static struct pcmcia_driver sl811_cs_driver = { .owner = THIS_MODULE, - .drv = { - .name = "sl811_cs", - }, + .name = "sl811_cs", .probe = sl811_cs_probe, .remove = sl811_cs_detach, .id_table = sl811_ids, |