diff options
Diffstat (limited to 'drivers')
174 files changed, 201 insertions, 312 deletions
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c index ec2c777fcdb0..7aed5c792597 100644 --- a/drivers/ata/pata_bf54x.c +++ b/drivers/ata/pata_bf54x.c @@ -1588,7 +1588,7 @@ static int __devinit bfin_atapi_probe(struct platform_device *pdev) host->ports[0]->ioaddr.ctl_addr = (void *)res->start; if (peripheral_request_list(atapi_io_port, "atapi-io-port")) { - dev_err(&pdev->dev, "Requesting Peripherals faild\n"); + dev_err(&pdev->dev, "Requesting Peripherals failed\n"); return -EFAULT; } diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index bf88f71a21f4..aa0e0c51cc08 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -15,8 +15,8 @@ * May be copied or modified under the terms of the GNU General Public License * Based in part on the ITE vendor provided SCSI driver. * - * Documentation available from - * http://www.ite.com.tw/pc/IT8212F_V04.pdf + * Documentation available from IT8212F_V04.pdf + * http://www.ite.com.tw/EN/products_more.aspx?CategoryID=3&ID=5,91 * Some other documents are NDA. * * The ITE8212 isn't exactly a standard IDE controller. It has two diff --git a/drivers/atm/Kconfig b/drivers/atm/Kconfig index be7461c9a87e..31c60101a69a 100644 --- a/drivers/atm/Kconfig +++ b/drivers/atm/Kconfig @@ -301,7 +301,7 @@ config ATM_IA control memory (128K-1KVC, 512K-4KVC), the size of the packet memory (128K, 512K, 1M), and the PHY type (Single/Multi mode OC3, UTP155, UTP25, DS3 and E3). Go to: - <http://www.iphase.com/products/ClassSheet.cfm?ClassID=ATM> + <http://www.iphase.com/> for more info about the cards. Say Y (or M to compile as a module named iphase) here if you have one of these cards. diff --git a/drivers/base/core.c b/drivers/base/core.c index 2cb49a93b1e6..6ed645411c40 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -233,7 +233,7 @@ static int dev_uevent(struct kset *kset, struct kobject *kobj, __func__, retval); } - /* have the device type specific fuction add its stuff */ + /* have the device type specific function add its stuff */ if (dev->type && dev->type->uevent) { retval = dev->type->uevent(dev, env); if (retval) diff --git a/drivers/char/agp/Kconfig b/drivers/char/agp/Kconfig index 5ddf67e76f8b..fcd867d923ba 100644 --- a/drivers/char/agp/Kconfig +++ b/drivers/char/agp/Kconfig @@ -34,7 +34,7 @@ config AGP_ALI X on the following ALi chipsets. The supported chipsets include M1541, M1621, M1631, M1632, M1641,M1647,and M1651. For the ALi-chipset question, ALi suggests you refer to - <http://www.ali.com.tw/eng/support/index.shtml>. + <http://www.ali.com.tw/>. The M1541 chipset can do AGP 1x and 2x, but note that there is an acknowledged incompatibility with Matrox G200 cards. Due to diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index e763d3312ce7..75b763cb3ea1 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -1,7 +1,7 @@ /* * For documentation on the i460 AGP interface, see Chapter 7 (AGP Subsystem) of * the "Intel 460GTX Chipset Software Developer's Manual": - * http://developer.intel.com/design/itanium/downloads/24870401s.htm + * http://www.intel.com/design/archives/itanium/downloads/248704.htm */ /* * 460GX support by Chris Ahna <christopher.j.ahna@intel.com> diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c index 3022801669b1..45b987c9889e 100644 --- a/drivers/char/apm-emulation.c +++ b/drivers/char/apm-emulation.c @@ -7,8 +7,8 @@ * Intel Corporation, Microsoft Corporation. Advanced Power Management * (APM) BIOS Interface Specification, Revision 1.2, February 1996. * - * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] + * This document is available from Microsoft at: + * http://www.microsoft.com/whdc/archive/amp_12.mspx */ #include <linux/module.h> #include <linux/poll.h> diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index 7b98c067190a..3ed20e8abc0d 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -2,7 +2,7 @@ * ipmi_bt_sm.c * * The state machine for an Open IPMI BT sub-driver under ipmi_si.c, part - * of the driver architecture at http://sourceforge.net/project/openipmi + * of the driver architecture at http://sourceforge.net/projects/openipmi * * Author: Rocky Craig <first.last@hp.com> * diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 7bd7c45b53ef..e537610d2f09 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1974,8 +1974,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/portal/download/files - * /unprot/hpspmi.pdf + * http://h21007.www2.hp.com/portal/download/files/unprot/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; diff --git a/drivers/char/n_r3964.c b/drivers/char/n_r3964.c index a98290d7a2c5..88dda0c45ee0 100644 --- a/drivers/char/n_r3964.c +++ b/drivers/char/n_r3964.c @@ -4,7 +4,6 @@ * Copyright by * Philips Automation Projects * Kassel (Germany) - * http://www.pap-philips.de * ----------------------------------------------------------- * This software may be used and distributed according to the terms of * the GNU General Public License, incorporated herein by reference. diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index ffa0efce0aed..6614416a8623 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -28,7 +28,7 @@ config CARDMAN_4000 This kernel driver requires additional userspace support, either by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/), - or via the cm4000 backend of OpenCT (http://www.opensc.com/). + or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc). config CARDMAN_4040 tristate "Omnikey CardMan 4040 support" @@ -41,7 +41,7 @@ config CARDMAN_4040 in I/O space. To use the kernel driver, you will need either the PC/SC ifdhandler provided from the Omnikey homepage (http://www.omnikey.com/), or a current development version of OpenCT - (http://www.opensc.org/). + (http://www.opensc-project.org/opensc). config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c index 6835c23e9a51..d962f25dcc2a 100644 --- a/drivers/char/pcmcia/cm4000_cs.c +++ b/drivers/char/pcmcia/cm4000_cs.c @@ -1666,7 +1666,7 @@ static int cmm_open(struct inode *inode, struct file *filp) /* opening will always block since the * monitor will be started by open, which * means we have to wait for ATR becoming - * vaild = block until valid (or card + * valid = block until valid (or card * inserted) */ if (filp->f_flags & O_NONBLOCK) { diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index 8ef16490810c..4bef6ab83622 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -3181,7 +3181,7 @@ static void stl_cd1400flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... This is easy for the cd1400, it accurately * maintains the busy port flag. */ @@ -4131,7 +4131,7 @@ static void stl_sc26198flush(struct stlport *portp) /* * Return the current state of data flow on this port. This is only - * really interresting when determining if data has fully completed + * really interesting when determining if data has fully completed * transmission or not... The sc26198 interrupt scheme cannot * determine when all data has actually drained, so we need to * check the port statusy register to be sure. diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index 4dc338f3d1aa..f6595aba4f0f 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -58,6 +58,6 @@ config TCG_INFINEON To compile this driver as a module, choose M here; the module will be called tpm_infineon. Further information on this driver and the supported hardware - can be found at http://www.prosec.rub.de/tpm + can be found at http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ endif # TCG_TPM diff --git a/drivers/char/tpm/tpm_infineon.c b/drivers/char/tpm/tpm_infineon.c index f58440791e65..76da32e11f18 100644 --- a/drivers/char/tpm/tpm_infineon.c +++ b/drivers/char/tpm/tpm_infineon.c @@ -7,7 +7,7 @@ * Copyright (C) 2005, Marcel Selhorst <m.selhorst@sirrix.com> * Sirrix AG - security technologies, http://www.sirrix.com and * Applied Data Security Group, Ruhr-University Bochum, Germany - * Project-Homepage: http://www.prosec.rub.de/tpm + * Project-Homepage: http://www.trust.rub.de/projects/linux-device-driver-infineon-tpm/ * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c index 2941dca91aae..400de071cabc 100644 --- a/drivers/edac/edac_device_sysfs.c +++ b/drivers/edac/edac_device_sysfs.c @@ -1,7 +1,7 @@ /* * file for managing the edac_device class of devices for EDAC * - * (C) 2007 SoftwareBitMaker (http://www.softwarebitmaker.com) + * (C) 2007 SoftwareBitMaker * * This file may be distributed under the terms of the * GNU General Public License. diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c index a2fa1feed724..678405ab04e4 100644 --- a/drivers/edac/i82443bxgx_edac.c +++ b/drivers/edac/i82443bxgx_edac.c @@ -12,7 +12,7 @@ * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>. * * Written with reference to 82443BX Host Bridge Datasheet: - * http://www.intel.com/design/chipsets/440/documentation.htm + * http://download.intel.com/design/chipsets/datashts/29063301.pdf * references to this document given in []. * * This module doesn't support the 440LX, but it may be possible to diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 88a3ae6cd023..e8b6a13515bd 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -74,7 +74,8 @@ config EFI_PCDP You must also enable the appropriate drivers (serial, VGA, etc.) - See <http://www.dig64.org/specifications/DIG64_HCDPv20_042804.pdf> + See DIG64_HCDPv20_042804.pdf available from + <http://www.dig64.org/specifications/> config DELL_RBU tristate "BIOS update support for DELL systems via sysfs" diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index f287fe79edc4..96c25d93eed1 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -15,7 +15,7 @@ * made in setup.S, copied to safe structures in setup.c, * and presents it in sysfs. * - * Please see http://linux.dell.com/edd30/results.html for + * Please see http://linux.dell.com/edd/results.html for * the list of BIOSs which have been reported to implement EDD. * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/firmware/pcdp.h b/drivers/firmware/pcdp.h index ce910d68bd19..e5530608e00d 100644 --- a/drivers/firmware/pcdp.h +++ b/drivers/firmware/pcdp.h @@ -1,8 +1,8 @@ /* * Definitions for PCDP-defined console devices * - * v1.0a: http://www.dig64.org/specifications/DIG64_HCDPv10a_01.pdf - * v2.0: http://www.dig64.org/specifications/DIG64_PCDPv20.pdf + * For DIG64_HCDPv10a_01.pdf and DIG64_PCDPv20.pdf (v1.0a and v2.0 resp.), + * please see <http://www.dig64.org/specifications/> * * (c) Copyright 2002, 2004 Hewlett-Packard Development Company, L.P. * Khalid Aziz <khalid.aziz@hp.com> diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index 949326d2a8e5..58e65f92c232 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -76,7 +76,7 @@ EXPORT_SYMBOL(drm_mode_debug_printmodeline); * according to the hdisplay, vdisplay, vrefresh. * It is based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at - * http://www.vesa.org/public/CVT/CVTd6r1.xls + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c. * What I have done is to translate it by using integer calculation. diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c index fcc79b5d22d1..6d64a2705f12 100644 --- a/drivers/gpu/drm/radeon/radeon_cs.c +++ b/drivers/gpu/drm/radeon/radeon_cs.c @@ -268,7 +268,7 @@ int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) } r = radeon_ib_schedule(rdev, parser.ib); if (r) { - DRM_ERROR("Faild to schedule IB !\n"); + DRM_ERROR("Failed to schedule IB !\n"); } radeon_cs_parser_fini(&parser, r); mutex_unlock(&rdev->cs_mutex); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 84c53e41a88f..a823d8fe54c2 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -631,7 +631,7 @@ int radeon_mmap(struct file *filp, struct vm_area_struct *vma) return drm_mmap(filp, vma); } - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; rdev = file_priv->minor->dev->dev_private; if (rdev == NULL) { return -EINVAL; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 0fe31766e4cf..635c0ffee7fe 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -545,7 +545,7 @@ int vmw_fifo_mmap(struct file *filp, struct vm_area_struct *vma) struct drm_file *file_priv; struct vmw_private *dev_priv; - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; dev_priv = vmw_priv(file_priv->minor->dev); if (vma->vm_pgoff != (dev_priv->mmio_start >> PAGE_SHIFT) || diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c index 83123287c60c..1e8eedd901e0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_glue.c @@ -39,7 +39,7 @@ int vmw_mmap(struct file *filp, struct vm_area_struct *vma) return drm_mmap(filp, vma); } - file_priv = (struct drm_file *)filp->private_data; + file_priv = filp->private_data; dev_priv = vmw_priv(file_priv->minor->dev); return ttm_bo_mmap(filp, vma, &dev_priv->bdev); } diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c index 251b63165e2a..60befc0ee65f 100644 --- a/drivers/hwmon/adm1025.c +++ b/drivers/hwmon/adm1025.c @@ -12,7 +12,7 @@ * resolution of about 0.5% of the nominal value). Temperature values are * reported with a 1 deg resolution and a 3 deg accuracy. Complete * datasheet can be obtained from Analog's website at: - * http://www.analog.com/Analog_Root/productPage/productHome/0,2121,ADM1025,00.html + * http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025 * * This driver also supports the ADM1025A, which differs from the ADM1025 * only in that it has "open-drain VID inputs while the ADM1025 has diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c index 65335b268fa9..4bf969c0a32b 100644 --- a/drivers/hwmon/adm1026.c +++ b/drivers/hwmon/adm1026.c @@ -6,7 +6,7 @@ Chip details at: - <http://www.analog.com/UploadedFiles/Data_Sheets/779263102ADM1026_a.pdf> + <http://www.onsemi.com/PowerSolutions/product.do?id=ADM1026> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index 9638d58f99fd..95cbfb3a7077 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -6,10 +6,10 @@ * Datasheets available at: * * f75375: - * http://www.fintek.com.tw/files/productfiles/2005111152950.pdf + * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf * * f75373: - * http://www.fintek.com.tw/files/productfiles/2005111153128.pdf + * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/g760a.c b/drivers/hwmon/g760a.c index 1f63d1a3af5e..1d6a6fa31fb4 100644 --- a/drivers/hwmon/g760a.c +++ b/drivers/hwmon/g760a.c @@ -5,7 +5,7 @@ Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org> Complete datasheet is available at GMT's website: - http://www.gmt.com.tw/datasheet/g760a.pdf + http://www.gmt.com.tw/product/datasheet/EDS-760A.pdf This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index bf0862a803c0..2b2ca1694f95 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -38,7 +38,7 @@ * available at http://developer.intel.com/. * * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, - * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF + * http://support.amd.com/us/Processor_TechDocs/26094.PDF * Table 74. VID Code Voltages * This corresponds to an arbitrary VRM code of 24 in the functions below. * These CPU models (K8 revision <= E) have 5 VID pins. See also: diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 45163693f737..97d98fbf5849 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c @@ -12,7 +12,7 @@ * * * HighPoint has its own drivers (open source except for the RAID part) - * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/. + * available from http://www.highpoint-tech.com/USA_new/service_support.htm * This may be useful to anyone wanting to work on this driver, however do not * trust them too much since the code tends to become less and less meaningful * as the time passes... :-/ diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index d81e49680c3f..808bcdcbf8e1 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c @@ -10,7 +10,6 @@ * Author: Mikko Ala-Fossi <maf@iki.fi> * Jan Evert van Grootheest <j.e.van.grootheest@caiway.nl> * - * Try: http://www.maf.iki.fi/~maf/ht6560b/ */ #define DRV_NAME "ht6560b" diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 7c5b01ce51d2..274798068a54 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -435,12 +435,11 @@ static int idedisk_prep_fn(struct request_queue *q, struct request *rq) if (!(rq->cmd_flags & REQ_FLUSH)) return BLKPREP_OK; - cmd = kmalloc(sizeof(*cmd), GFP_ATOMIC); + cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC); /* FIXME: map struct ide_taskfile on rq->cmd[] */ BUG_ON(cmd == NULL); - memset(cmd, 0, sizeof(*cmd)); if (ata_id_flush_ext_enabled(drive->id) && (drive->capacity64 >= (1UL << 28))) cmd->tf.command = ATA_CMD_FLUSH_EXT; diff --git a/drivers/infiniband/Kconfig b/drivers/infiniband/Kconfig index 89d70de5e235..6e35eccc9caa 100644 --- a/drivers/infiniband/Kconfig +++ b/drivers/infiniband/Kconfig @@ -16,7 +16,7 @@ config INFINIBAND_USER_MAD Userspace InfiniBand Management Datagram (MAD) support. This is the kernel side of the userspace MAD support, which allows userspace processes to send and receive MADs. You will also - need libibumad from <http://www.openib.org>. + need libibumad from <http://www.openfabrics.org/downloads/management/>. config INFINIBAND_USER_ACCESS tristate "InfiniBand userspace access (verbs and CM)" @@ -28,7 +28,7 @@ config INFINIBAND_USER_ACCESS to set up connections and directly access InfiniBand hardware for fast-path operations. You will also need libibverbs, libibcm and a hardware driver library from - <http://www.openib.org>. + <http://www.openfabrics.org/git/>. config INFINIBAND_USER_MEM bool diff --git a/drivers/infiniband/hw/cxgb3/Kconfig b/drivers/infiniband/hw/cxgb3/Kconfig index 2acec3fadf69..2b6352b85485 100644 --- a/drivers/infiniband/hw/cxgb3/Kconfig +++ b/drivers/infiniband/hw/cxgb3/Kconfig @@ -10,7 +10,7 @@ config INFINIBAND_CXGB3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/infiniband/hw/cxgb4/Kconfig b/drivers/infiniband/hw/cxgb4/Kconfig index ccb85eaaad75..6b7e6c543534 100644 --- a/drivers/infiniband/hw/cxgb4/Kconfig +++ b/drivers/infiniband/hw/cxgb4/Kconfig @@ -10,7 +10,7 @@ config INFINIBAND_CXGB4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index aa2be214270f..79d9971aff1f 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1723,7 +1723,7 @@ static int qib_close(struct inode *in, struct file *fp) mutex_lock(&qib_mutex); - fd = (struct qib_filedata *) fp->private_data; + fd = fp->private_data; fp->private_data = NULL; rcd = fd->rcd; if (!rcd) { @@ -1809,7 +1809,7 @@ static int qib_ctxt_info(struct file *fp, struct qib_ctxt_info __user *uinfo) struct qib_ctxtdata *rcd = ctxt_fp(fp); struct qib_filedata *fd; - fd = (struct qib_filedata *) fp->private_data; + fd = fp->private_data; info.num_active = qib_count_active_units(); info.unit = rcd->dd->unit; diff --git a/drivers/infiniband/ulp/iser/Kconfig b/drivers/infiniband/ulp/iser/Kconfig index b411c51842da..d00af71a2cfc 100644 --- a/drivers/infiniband/ulp/iser/Kconfig +++ b/drivers/infiniband/ulp/iser/Kconfig @@ -9,4 +9,4 @@ config INFINIBAND_ISER The iSER protocol is defined by IETF. See <http://www.ietf.org/rfc/rfc5046.txt> - and <http://www.infinibandta.org/members/spec/Annex_iSER.PDF> + and <http://members.infinibandta.org/kwspub/spec/Annex_iSER.PDF> diff --git a/drivers/input/joystick/gamecon.c b/drivers/input/joystick/gamecon.c index 0ffaf2c77a19..e68e49786483 100644 --- a/drivers/input/joystick/gamecon.c +++ b/drivers/input/joystick/gamecon.c @@ -521,9 +521,8 @@ static void gc_multi_process_packet(struct gc *gc) * PSX support * * See documentation at: - * http://www.dim.com/~mackys/psxmemcard/ps-eng2.txt + * http://www.geocities.co.jp/Playtown/2004/psx/ps_eng.txt * http://www.gamesx.com/controldata/psxcont/psxcont.htm - * ftp://milano.usal.es/pablo/ * */ diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index 2b0eba6619bd..b09c7d127219 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -259,7 +259,7 @@ static unsigned short keymap_usbph01(int scancode) /* * Keymap for ATCom AU-100 - * http://www.atcom.cn/En_products_AU100.html + * http://www.atcom.cn/products.html * http://www.packetizer.com/products/au100/ * http://www.voip-info.org/wiki/view/AU-100 * diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index c714ca2407f8..bf5fd7f6a313 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -30,6 +30,7 @@ config MOUSE_PS2 <http://w1.894.telia.com/~u89404340/touchpad/index.html> and a new version of GPM at: <http://www.geocities.com/dt_or/gpm/gpm.html> + <http://xorg.freedesktop.org/archive/individual/driver/> to take advantage of the advanced features of the touchpad. If unsure, say Y. diff --git a/drivers/input/mouse/touchkit_ps2.c b/drivers/input/mouse/touchkit_ps2.c index 88121c59c3cc..1fd8f5e192f9 100644 --- a/drivers/input/mouse/touchkit_ps2.c +++ b/drivers/input/mouse/touchkit_ps2.c @@ -21,8 +21,8 @@ * * Based upon touchkitusb.c * - * Vendor documentation is available in support section of: - * http://www.egalax.com.tw/ + * Vendor documentation is available at: + * http://home.eeti.com.tw/web20/drivers/Software%20Programming%20Guide_v2.0.pdf */ #include <linux/kernel.h> diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c index efd3aebaba5f..36e57deacd03 100644 --- a/drivers/input/touchscreen/mk712.c +++ b/drivers/input/touchscreen/mk712.c @@ -17,7 +17,7 @@ * found in Gateway AOL Connected Touchpad computers. * * Documentation for ICS MK712 can be found at: - * http://www.icst.com/pdf/mk712.pdf + * http://www.idt.com/products/getDoc.cfm?docID=18713923 */ /* diff --git a/drivers/isdn/i4l/isdn_audio.c b/drivers/isdn/i4l/isdn_audio.c index 861bdf3421f2..d5013935ac62 100644 --- a/drivers/isdn/i4l/isdn_audio.c +++ b/drivers/isdn/i4l/isdn_audio.c @@ -439,7 +439,7 @@ isdn_audio_xlaw2adpcm(adpcm_state * s, int fmt, unsigned char *in, /* * Goertzel algorithm. - * See http://ptolemy.eecs.berkeley.edu/~pino/Ptolemy/papers/96/dtmf_ict/ + * See http://ptolemy.eecs.berkeley.edu/papers/96/dtmf_ict/ * for more info. * Result is stored into an sk_buff and queued up for later * evaluation. diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index d0d221332db0..9e3e2c566598 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -3,9 +3,9 @@ * * Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt * - * Documentation from - * http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf - * http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf + * Documentation from 115254175ADT7467_pra.pdf and 3686221171167ADT7460_b.pdf + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7467 + * http://www.onsemi.com/PowerSolutions/product.do?id=ADT7460 * */ diff --git a/drivers/media/IR/keymaps/rc-manli.c b/drivers/media/IR/keymaps/rc-manli.c index 1e9fbfa90a1e..0f590b3d01c0 100644 --- a/drivers/media/IR/keymaps/rc-manli.c +++ b/drivers/media/IR/keymaps/rc-manli.c @@ -13,7 +13,6 @@ #include <media/rc-map.h> /* Michael Tokarev <mjt@tls.msk.ru> - http://www.corpit.ru/mjt/beholdTV/remote_control.jpg keytable is used by MANLI MTV00[0x0c] and BeholdTV 40[13] at least, and probably other cards too. The "ascii-art picture" below (in comments, first row diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 893fbc57c72f..a12b88f53ed9 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -26,7 +26,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ @@ -2291,12 +2291,7 @@ static int frontend_init(struct av7110 *av7110) /* Budgetpatch note: * Original hardware design by Roberto Deza: * There is a DVB_Wiki at - * http://212.227.36.83/linuxtv/wiki/index.php/Main_Page - * where is described this 'DVB TT Budget Patch', on Card Modding: - * http://212.227.36.83/linuxtv/wiki/index.php/DVB_TT_Budget_Patch - * On the short description there is also a link to a external file, - * with more details: - * http://perso.wanadoo.es/jesussolano/Ttf_tsc1.zip + * http://www.linuxtv.org/ * * New software triggering design by Emard that works on * original Roberto Deza's hardware: diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 6ef3996565ad..244d5d51f5f9 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -25,7 +25,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/types.h> diff --git a/drivers/media/dvb/ttpci/av7110_ca.c b/drivers/media/dvb/ttpci/av7110_ca.c index 43f61f2eca98..122c72806916 100644 --- a/drivers/media/dvb/ttpci/av7110_ca.c +++ b/drivers/media/dvb/ttpci/av7110_ca.c @@ -25,7 +25,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/kernel.h> diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index e162691b515d..f1cbfe526989 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -22,7 +22,7 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ /* for debugging ARM communication: */ diff --git a/drivers/media/dvb/ttpci/av7110_v4l.c b/drivers/media/dvb/ttpci/av7110_v4l.c index 8986d967d2f4..ac20c5bbfa43 100644 --- a/drivers/media/dvb/ttpci/av7110_v4l.c +++ b/drivers/media/dvb/ttpci/av7110_v4l.c @@ -22,7 +22,7 @@ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/kernel.h> diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 983672aa2450..97afc01f60d0 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -30,7 +30,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "budget.h" diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index 13ac9e3ab121..a9c2c326df4b 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -26,7 +26,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include <linux/module.h> diff --git a/drivers/media/dvb/ttpci/budget-core.c b/drivers/media/dvb/ttpci/budget-core.c index ba18e56d5f11..054661315311 100644 --- a/drivers/media/dvb/ttpci/budget-core.c +++ b/drivers/media/dvb/ttpci/budget-core.c @@ -31,7 +31,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c index 9c92f9ddd223..579835590690 100644 --- a/drivers/media/dvb/ttpci/budget-patch.c +++ b/drivers/media/dvb/ttpci/budget-patch.c @@ -27,7 +27,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "av7110.h" diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 874a10a9d493..d238fb9371a7 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -31,7 +31,7 @@ * Or, point your browser to http://www.gnu.org/copyleft/gpl.html * * - * the project's page is at http://www.linuxtv.org/dvb/ + * the project's page is at http://www.linuxtv.org/ */ #include "budget.h" diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 4349213b403b..255d40df4b46 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -13,7 +13,7 @@ * anybody does please mail me. * * For the pdf file see: - * http://www.semiconductors.philips.com/pip/TEA5757H/V1 + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf * * * CHANGES: diff --git a/drivers/media/radio/radio-typhoon.c b/drivers/media/radio/radio-typhoon.c index 03439282dfce..b1f630527dc1 100644 --- a/drivers/media/radio/radio-typhoon.c +++ b/drivers/media/radio/radio-typhoon.c @@ -1,9 +1,6 @@ /* Typhoon Radio Card driver for radio support * (c) 1999 Dr. Henrik Seidel <Henrik.Seidel@gmx.de> * - * Card manufacturer: - * http://194.18.155.92/idc/prod2.idc?nr=50753&lang=e - * * Notes on the hardware * * This card has two output sockets, one for speakers and one for line. diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f6e4d0475351..d000522cb0f4 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -978,7 +978,7 @@ config USB_STKWEBCAM Supported devices are typically found in some Asus laptops, with USB id 174f:a311 and 05e1:0501. Other Syntek cameras may be supported by the stk11xx driver, from which this is - derived, see http://stk11xx.sourceforge.net + derived, see <http://sourceforge.net/projects/syntekdriver/> To compile this driver as a module, choose M here: the module will be called stkwebcam. diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index be35e6965829..9536f1a40dd2 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -4,7 +4,7 @@ * sensor. * * The data sheet for this device can be found at: - * http://www.marvell.com/products/pcconn/88ALP01.jsp + * http://www.marvell.com/products/pc_connectivity/88alp01/ * * Copyright 2006 One Laptop Per Child Association, Inc. * Copyright 2006-7 Jonathan Corbet <corbet@lwn.net> diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 6b805afe5d20..fe1090940b01 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -39,7 +39,7 @@ static struct cx18_card_tuner_i2c cx18_i2c_std = { .tv = { 0x61, 0x60, I2C_CLIENT_END }, }; -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ This keeps the PCI ID database up to date. Note that the entries must be added under vendor 0x4444 (Conexant) as subsystem IDs. New vendor IDs should still be added to the vendor ID list. */ diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index abd64e89f60f..53a67824071b 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -7,7 +7,7 @@ * (c) 2008 Steven Toth <stoth@linuxtv.org> * - CX23885/7/8 support * - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index e46e1ceef72c..660b2a927feb 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -9,7 +9,7 @@ * (c) 2005-2006 Mauro Carvalho Chehab <mchehab@infradead.org> * - video_ioctl2 conversion * - * Includes parts from the ivtv driver( http://ivtv.sourceforge.net/), + * Includes parts from the ivtv driver <http://sourceforge.net/projects/ivtv/> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/video/ivtv/ivtv-cards.c b/drivers/media/video/ivtv/ivtv-cards.c index ca1fd3227a93..87afbbee2063 100644 --- a/drivers/media/video/ivtv/ivtv-cards.c +++ b/drivers/media/video/ivtv/ivtv-cards.c @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { /********************** card configuration *******************************/ -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/iii +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ This keeps the PCI ID database up to date. Note that the entries must be added under vendor 0x4444 (Conexant) as subsystem IDs. New vendor IDs should still be added to the vendor ID list. */ diff --git a/drivers/media/video/mxb.c b/drivers/media/video/mxb.c index ef0c8178f255..b1dbcf1d2bcb 100644 --- a/drivers/media/video/mxb.c +++ b/drivers/media/video/mxb.c @@ -3,7 +3,7 @@ Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> - Visit http://www.mihu.de/linux/saa7146/mxb/ + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html for further details about this card. This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c index 2782f94cf6f8..2e86fdc86989 100644 --- a/drivers/media/video/sn9c102/sn9c102_pas202bcb.c +++ b/drivers/media/video/sn9c102/sn9c102_pas202bcb.c @@ -4,7 +4,6 @@ * * * Copyright (C) 2004 by Carlos Eduardo Medaglia Dyonisio * * <medaglia@undl.org.br> * - * http://cadu.homelinux.com:8080/ * * * * Support for SN9C103, DAC Magnitude, exposure and green gain controls * * added by Luca Risolia <luca.risolia@studio.unibo.it> * diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h index 5c27b251354e..b654bfff8740 100644 --- a/drivers/media/video/zoran/videocodec.h +++ b/drivers/media/video/zoran/videocodec.h @@ -56,7 +56,7 @@ the slave is bound to it). Otherwise it doesn't need this functions and therfor they may not be initialized. - The other fuctions are just for convenience, as they are for sure used by + The other functions are just for convenience, as they are for sure used by most/all of the codecs. The last ones may be ommited, too. See the structure declaration below for more information and which data has diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c index 6f89d0a096ea..3c471a4e3e4a 100644 --- a/drivers/media/video/zoran/zoran_driver.c +++ b/drivers/media/video/zoran/zoran_driver.c @@ -1177,7 +1177,7 @@ static int setup_window(struct zoran_fh *fh, int x, int y, int width, int height if (height > BUZ_MAX_HEIGHT) height = BUZ_MAX_HEIGHT; - /* Check for vaild parameters */ + /* Check for invalid parameters */ if (width < BUZ_MIN_WIDTH || height < BUZ_MIN_HEIGHT || width > BUZ_MAX_WIDTH || height > BUZ_MAX_HEIGHT) { dprintk(1, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index db2fbe2d4146..1f69743b12ec 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -112,8 +112,8 @@ config IBM_ASM WARNING: This software may not be supported or function correctly on your IBM server. Please consult the IBM ServerProven - website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for - information on the specific driver level and support statement + website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/> + for information on the specific driver level and support statement for your IBM server. config PHANTOM @@ -385,7 +385,7 @@ config BMP085 depends on I2C && SYSFS help If you say yes here you get support for the Bosch Sensortec - BMP086 digital pressure sensor. + BMP085 digital pressure sensor. To compile this driver as a module, choose M here: the module will be called bmp085. diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 3e6c47bdce53..ba29d2f0ffd7 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -418,8 +418,8 @@ struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) /* * Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3, 1.4 - * see: http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 - * http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf + * see: http://cs.ozerki.net/zap/pub/axim-x5/docs/cfi_r20.pdf, page 19 + * http://www.spansion.com/Support/AppNotes/cfi_100_20011201.pdf * http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf */ if (extp->MajorVersion != '1' || diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c index f4359fe7150f..caf604167f03 100644 --- a/drivers/mtd/devices/lart.c +++ b/drivers/mtd/devices/lart.c @@ -17,7 +17,7 @@ * - January 2000 * * [2] MTD internal API documentation - * - http://www.linux-mtd.infradead.org/tech/ + * - http://www.linux-mtd.infradead.org/ * * Limitations: * diff --git a/drivers/mtd/ftl.c b/drivers/mtd/ftl.c index 4d6a64c387ec..037b399df3f1 100644 --- a/drivers/mtd/ftl.c +++ b/drivers/mtd/ftl.c @@ -51,7 +51,7 @@ Use of the FTL format for non-PCMCIA applications may be an infringement of these patents. For additional information, - contact M-Systems (http://www.m-sys.com) directly. + contact M-Systems directly. M-Systems since acquired by Sandisk. ======================================================================*/ #include <linux/mtd/blktrans.h> diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 701d942c6795..962212628f6e 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -172,7 +172,7 @@ config MTD_OCTAGON This provides a 'mapping' driver which supports the way in which the flash chips are connected in the Octagon-5066 Single Board Computer. More information on the board is available at - <http://www.octagonsystems.com/CPUpages/5066.html>. + <http://www.octagonsystems.com/products/5066.aspx>. config MTD_VMAX tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301" @@ -284,7 +284,7 @@ config MTD_TQM8XXL chips, currently uses AMD one. This 'mapping' driver supports that arrangement, allowing the CFI probe and command set driver code to communicate with the chips on the TQM8xxL board. More at - <http://www.denx.de/embedded-ppc-en.html>. + <http://www.denx.de/wiki/PPCEmbedded/>. config MTD_RPXLITE tristate "CFI Flash device mapped on RPX Lite or CLLF" diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index db1dfc5a1b11..e06c8983978e 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -2,7 +2,7 @@ * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01 * * The data sheet for this device can be found at: - * http://www.marvell.com/products/pcconn/88ALP01.jsp + * http://wiki.laptop.org/go/Datasheets * * Copyright © 2006 Red Hat, Inc. * Copyright © 2006 David Woodhouse <dwmw2@infradead.org> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 7ca1fc8a3a76..77c1fab7d774 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -924,7 +924,7 @@ config SMC91X including the SMC91C94 and the SMC91C111. Say Y if you want it compiled into the kernel, and read the file <file:Documentation/networking/smc9.txt> and the Ethernet-HOWTO, - available from <http://www.linuxdoc.org/docs.html#howto>. + available from <http://www.tldp.org/docs.html#howto>. This driver is also available as a module ( = code which can be inserted in and removed from the running kernel whenever you want). @@ -1034,7 +1034,7 @@ config SMC911X including the new LAN9115, LAN9116, LAN9117, and LAN9118. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smc911x. If you want to compile it as a module, say M @@ -1516,7 +1516,7 @@ config E100 For the latest Intel PRO/100 network driver for Linux, see: - <http://appsr.intel.com/scripts-df/support_intel.asp> + <http://www.intel.com/p/en_US/support/highlights/network/pro100plus> More specific information on configuring the driver is in <file:Documentation/networking/e100.txt>. @@ -1542,9 +1542,8 @@ config FEALNX select CRC32 select MII help - Say Y here to support the Mysom MTD-800 family of PCI-based Ethernet - cards. Specifications and data at - <http://www.myson.com.hk/mtd/datasheet/>. + Say Y here to support the Myson MTD-800 family of PCI-based Ethernet + cards. <http://www.myson.com.tw/> config NATSEMI tristate "National Semiconductor DP8381x series PCI Ethernet support" @@ -1718,7 +1717,7 @@ config SMSC9420 This is a driver for SMSC's LAN9420 PCI ethernet adapter. Say Y if you want it compiled into the kernel, and read the Ethernet-HOWTO, available from - <http://www.linuxdoc.org/docs.html#howto>. + <http://www.tldp.org/docs.html#howto>. This driver is also available as a module. The module will be called smsc9420. If you want to compile it as a module, say M @@ -2565,7 +2564,7 @@ config CHELSIO_T1 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2597,7 +2596,7 @@ config CHELSIO_T3 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2622,7 +2621,7 @@ config CHELSIO_T4 our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. @@ -2645,7 +2644,7 @@ config CHELSIO_T4VF our website at <http://www.chelsio.com>. For customer support, please visit our customer support page at - <http://www.chelsio.com/support.htm>. + <http://www.chelsio.com/support.html>. Please send feedback to <linux-bugs@chelsio.com>. diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig index 20f97e7017ce..0b376a990972 100644 --- a/drivers/net/appletalk/Kconfig +++ b/drivers/net/appletalk/Kconfig @@ -19,7 +19,7 @@ config ATALK General information about how to connect Linux, Windows machines and Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The - NET-3-HOWTO, available from + NET3-4-HOWTO, available from <http://www.tldp.org/docs.html#howto>, contains valuable information as well. diff --git a/drivers/net/atp.c b/drivers/net/atp.c index dfd96b20547f..f3459798b0e9 100644 --- a/drivers/net/atp.c +++ b/drivers/net/atp.c @@ -68,7 +68,7 @@ static int xcvr[NUM_UNITS]; /* The data transfer mode. */ In 1997 Realtek made available the documentation for the second generation RTL8012 chip, which has lead to several driver improvements. - http://www.realtek.com.tw/cn/cn.html + http://www.realtek.com.tw/ Theory of Operation diff --git a/drivers/net/depca.c b/drivers/net/depca.c index 44c0694c1f4e..91b3846ffc8a 100644 --- a/drivers/net/depca.c +++ b/drivers/net/depca.c @@ -1487,7 +1487,7 @@ static void __init depca_platform_probe (void) if (!pldev->dev.driver) { /* The driver was not bound to this device, there was * no hardware at this address. Unregister it, as the - * release fuction will take care of freeing the + * release function will take care of freeing the * allocated structure */ depca_io_ports[i].device = NULL; diff --git a/drivers/net/epic100.c b/drivers/net/epic100.c index 32543a300b81..aa56963ad558 100644 --- a/drivers/net/epic100.c +++ b/drivers/net/epic100.c @@ -131,8 +131,8 @@ IIIa. Ring buffers IVb. References -http://www.smsc.com/main/tools/discontinued/83c171.pdf -http://www.smsc.com/main/tools/discontinued/83c175.pdf +http://www.smsc.com/media/Downloads_Public/discontinued/83c171.pdf +http://www.smsc.com/media/Downloads_Public/discontinued/83c175.pdf http://scyld.com/expert/NWay.html http://www.national.com/pf/DP/DP83840A.html diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig index 62d5d5cfd6a6..95dbcfdf131d 100644 --- a/drivers/net/hamradio/Kconfig +++ b/drivers/net/hamradio/Kconfig @@ -73,7 +73,7 @@ config DMASCC certain parameters, such as channel access timing, clock mode, and DMA channel. This is accomplished with a small utility program, dmascc_cfg, available at - <http://cacofonix.nt.tuwien.ac.at/~oe1kib/Linux/>. Please be sure to + <http://www.linux-ax25.org/wiki/Ax25-tools>. Please be sure to get at least version 1.27 of dmascc_cfg, as older versions will not work with the current driver. diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c index 0037a696cd0a..94d9969ec0bb 100644 --- a/drivers/net/ibmlana.c +++ b/drivers/net/ibmlana.c @@ -23,7 +23,7 @@ paper sources: 'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 Document Number SC30-3661-00' by IBM for info on the adapter itself - Also see http://www.natsemi.com/ + Also see http://www.national.com/analog special acknowledgements to: - Bob Eager for helping me out with documentation from IBM diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 75155a27fdde..14db09e2fa8b 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -3540,7 +3540,7 @@ enum latency_range { * Stores a new ITR value based on strictly on packet size. This * algorithm is less sophisticated than that used in igb_update_itr, * due to the difficulty of synchronizing statistics across multiple - * receive rings. The divisors and thresholds used by this fuction + * receive rings. The divisors and thresholds used by this function * were determined based on theoretical maximum wire speed and testing * data, in order to minimize response time while increasing bulk * throughput. diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c index a3cb109006a5..92631eb6f6a3 100644 --- a/drivers/net/irda/ali-ircc.c +++ b/drivers/net/irda/ali-ircc.c @@ -142,7 +142,7 @@ static void SetCOMInterrupts(struct ali_ircc_cb *self , unsigned char enable); * Function ali_ircc_init () * * Initialize chip. Find out whay kinds of chips we are dealing with - * and their configuation registers address + * and their configuration registers address */ static int __init ali_ircc_init(void) { diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h index 36c3060411d2..4dc39e5f0156 100644 --- a/drivers/net/irda/donauboe.h +++ b/drivers/net/irda/donauboe.h @@ -54,7 +54,7 @@ /* anyone who has. HOWEVER the chip bears a striking resemblence */ /* to the IrDA controller in the Toshiba RISC TMPR3922 chip */ /* the documentation for this is freely available at */ -/* http://www.toshiba.com/taec/components/Generic/TMPR3922.shtml */ +/* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */ /* The mapping between the registers in that document and the */ /* Registers in the 701 oboe chip are as follows */ diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c index 8dd03439d994..1766dc4f07e1 100644 --- a/drivers/net/pci-skeleton.c +++ b/drivers/net/pci-skeleton.c @@ -78,7 +78,7 @@ that almost all frames will need to be copied to an alignment buffer. IVb. References -http://www.realtek.com.tw/cn/cn.html +http://www.realtek.com.tw/ http://www.scyld.com/expert/NWay.html IVc. Errata diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 2807a0fcadc4..321b12f82645 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -62,7 +62,7 @@ invalid ramWidth is Very Bad. V. References http://www.scyld.com/expert/NWay.html -http://www.national.com/pf/DP/DP83840.html +http://www.national.com/opf/DP/DP83840A.html Thanks to Terry Murphy of 3Com for providing development information for earlier 3Com products. diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c index 5526ab4895e6..5ecfa4b1e758 100644 --- a/drivers/net/ps3_gelic_net.c +++ b/drivers/net/ps3_gelic_net.c @@ -642,7 +642,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card) status = lv1_net_stop_rx_dma(bus_id(card), dev_id(card), 0); if (status) dev_err(ctodev(card), - "lv1_net_stop_rx_dma faild, %d\n", status); + "lv1_net_stop_rx_dma failed, %d\n", status); } /** @@ -660,7 +660,7 @@ static inline void gelic_card_disable_txdmac(struct gelic_card *card) status = lv1_net_stop_tx_dma(bus_id(card), dev_id(card), 0); if (status) dev_err(ctodev(card), - "lv1_net_stop_tx_dma faild, status=%d\n", status); + "lv1_net_stop_tx_dma failed, status=%d\n", status); } /** diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index d8249d7653c6..d96d2f7a3f14 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -95,7 +95,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_int.h> #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #include <asm/sibyte/sb1250_scd.h> #include <asm/sibyte/sb1250_mac.h> @@ -106,7 +106,7 @@ MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) #define UNIT_INT(n) (K_INT_MAC_0 + (n)) #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #ifdef K_INT_PHY @@ -1568,7 +1568,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) M_MAC_RX_ENABLE | M_MAC_TX_ENABLE, s->sbm_macenable); #else -#error invalid SiByte MAC configuation +#error invalid SiByte MAC configuration #endif #ifdef CONFIG_SBMAC_COALESCE diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index 31b92f5f32cb..417adf372828 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -15,7 +15,7 @@ * Rewritten for 2.6 by Cesar Eduardo Barros * * A datasheet for this chip can be found at - * http://www.silan.com.cn/english/products/pdf/SC92031AY.pdf + * http://www.silan.com.cn/english/product/pdf/SC92031AY.pdf */ /* Note about set_mac_address: I don't know how to change the hardware diff --git a/drivers/net/skfp/hwt.c b/drivers/net/skfp/hwt.c index e6baa53307c7..c0798fd2ca69 100644 --- a/drivers/net/skfp/hwt.c +++ b/drivers/net/skfp/hwt.c @@ -221,7 +221,7 @@ u_long hwt_quick_read(struct s_smc *smc) * para start start time * duration time to wait * - * NOTE: The fuction will return immediately, if the timer is not + * NOTE: The function will return immediately, if the timer is not * started ************************/ void hwt_wait_time(struct s_smc *smc, u_long start, long int duration) diff --git a/drivers/net/skfp/skfddi.c b/drivers/net/skfp/skfddi.c index ba2e8339fe90..0a66fed52e8e 100644 --- a/drivers/net/skfp/skfddi.c +++ b/drivers/net/skfp/skfddi.c @@ -33,7 +33,7 @@ * The driver architecture is based on the DEC FDDI driver by * Lawrence V. Stefani and several ethernet drivers. * I also used an existing Windows NT miniport driver. - * All hardware dependent fuctions are handled by the SysKonnect + * All hardware dependent functions are handled by the SysKonnect * Hardware Module. * The only headerfiles that are directly related to this source * are skfddi.c, h/types.h, h/osdef1st.h, h/targetos.h. diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index ec8c804a795d..f8e463cd8ecc 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -78,7 +78,7 @@ * - Updated tlan.txt accordingly. * - Adjusted minimum/maximum frame length. * - There is now a TLAN website up at - * http://tlan.kernel.dk + * http://hp.sourceforge.net/ * * v1.7 April 07, 2000 - Started to implement custom ioctls. Driver now * reports PHY information when used with Donald diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c index c83f4f6e39e1..663b8860a531 100644 --- a/drivers/net/tokenring/tms380tr.c +++ b/drivers/net/tokenring/tms380tr.c @@ -5,7 +5,7 @@ * Originally sktr.c: Written 1997 by Christoph Goos * * A fine result of the Linux Systems Network Architecture Project. - * http://www.linux-sna.org + * http://www.vanheusden.com/sna/ * * This software may be used and distributed according to the terms * of the GNU General Public License, incorporated herein by reference. diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig index f3035951422f..1f8d4a8d8ea4 100644 --- a/drivers/net/tulip/Kconfig +++ b/drivers/net/tulip/Kconfig @@ -151,7 +151,7 @@ config ULI526X select CRC32 ---help--- This driver is for ULi M5261/M5263 10/100M Ethernet Controller - (<http://www.uli.com.tw/>). + (<http://www.nvidia.com/page/uli_drivers.html>). To compile this driver as a module, choose M here. The module will be called uli526x. diff --git a/drivers/net/tulip/pnic2.c b/drivers/net/tulip/pnic2.c index b8197666021e..4690c8e69207 100644 --- a/drivers/net/tulip/pnic2.c +++ b/drivers/net/tulip/pnic2.c @@ -59,7 +59,7 @@ * Bit 14:12 - autonegotiation state (write 001 to start autonegotiate) * Bit 3 - Autopolarity state * Bit 2 - LS10B - link state of 10baseT 0 - good, 1 - failed - * Bit 1 - LS100B - link state of 100baseT 0 - good, 1- faild + * Bit 1 - LS100B - link state of 100baseT 0 - good, 1 - failed * * * Data Port Selection Info diff --git a/drivers/net/usb/plusb.c b/drivers/net/usb/plusb.c index 08555f8b15f4..08ad269f6b4e 100644 --- a/drivers/net/usb/plusb.c +++ b/drivers/net/usb/plusb.c @@ -32,7 +32,7 @@ /* - * Prolific PL-2301/PL-2302 driver ... http://www.prolifictech.com + * Prolific PL-2301/PL-2302 driver ... http://www.prolific.com.tw/ * * The protocol and handshaking used here should be bug-compatible * with the Linux 2.2 "plusb" driver, by Deti Fliegl. diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index d08ce6a264cb..423eb26386c8 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -409,7 +409,7 @@ config CYCLADES_SYNC tristate "Cyclom 2X(tm) cards (EXPERIMENTAL)" depends on WAN_ROUTER_DRIVERS && (PCI || ISA) ---help--- - Cyclom 2X from Cyclades Corporation <http://www.cyclades.com/> is an + Cyclom 2X from Cyclades Corporation <http://www.avocent.com/> is an intelligent multiprotocol WAN adapter with data transfer rates up to 512 Kbps. These cards support the X.25 and SNA related protocols. diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index 9937bbab938d..5d4bb615ccce 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -109,7 +109,7 @@ static int hdlc_device_event(struct notifier_block *this, unsigned long event, return NOTIFY_DONE; /* not an HDLC device */ if (event != NETDEV_CHANGE) - return NOTIFY_DONE; /* Only interrested in carrier changes */ + return NOTIFY_DONE; /* Only interested in carrier changes */ on = netif_carrier_ok(dev); diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 4a367cdb3eb9..308b79e1ff08 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -348,7 +348,7 @@ struct ath5k_srev_name { /* * Some of this information is based on Documentation from: * - * http://madwifi.org/wiki/ChipsetFeatures/SuperAG + * http://madwifi-project.org/wiki/ChipsetFeatures/SuperAG * * Modulation for Atheros' eXtended Range - range enhancing extension that is * supposed to double the distance an Atheros client device can keep a diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h index a34929f06533..ca79ecd832fd 100644 --- a/drivers/net/wireless/ath/ath5k/reg.h +++ b/drivers/net/wireless/ath/ath5k/reg.h @@ -26,7 +26,6 @@ * Atheros presentations and papers like these: * * 5210 - http://nova.stanford.edu/~bbaas/ps/isscc2002_slides.pdf - * http://www.it.iitb.ac.in/~janak/wifire/01222734.pdf * * 5211 - http://www.hotchips.org/archives/hc14/3_Tue/16_mcfarland.pdf * diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index e9d9d622a9b0..b7cb165d612b 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2621,7 +2621,7 @@ static irqreturn_t prism2_interrupt(int irq, void *dev_id) iface = netdev_priv(dev); local = iface->local; - /* Detect early interrupt before driver is fully configued */ + /* Detect early interrupt before driver is fully configured */ spin_lock(&local->irq_init_lock); if (!dev->base_addr) { if (net_ratelimit()) { diff --git a/drivers/net/wireless/p54/Kconfig b/drivers/net/wireless/p54/Kconfig index e5f45cb2a7a2..25f965ffc889 100644 --- a/drivers/net/wireless/p54/Kconfig +++ b/drivers/net/wireless/p54/Kconfig @@ -9,7 +9,7 @@ config P54_COMMON also need to be enabled in order to support any devices. These devices require softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54common. @@ -21,7 +21,7 @@ config P54_USB This driver is for USB isl38xx based wireless cards. These devices require softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54usb. @@ -35,7 +35,7 @@ config P54_PCI supported by the fullmac driver/firmware. This driver requires softmac firmware which can be found at - http://prism54.org/ + <http://wireless.kernel.org/en/users/Drivers/p54> If you choose to build a module, it'll be called p54pci. diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c index dc14420a9adc..b5e64d71b7a6 100644 --- a/drivers/net/wireless/prism54/islpci_hotplug.c +++ b/drivers/net/wireless/prism54/islpci_hotplug.c @@ -38,7 +38,7 @@ module_param(init_pcitm, int, 0); /* In this order: vendor, device, subvendor, subdevice, class, class_mask, * driver_data * If you have an update for this please contact prism54-devel@prism54.org - * The latest list can be found at http://prism54.org/supported_cards.php */ + * The latest list can be found at http://wireless.kernel.org/en/users/Drivers/p54 */ static DEFINE_PCI_DEVICE_TABLE(prism54_id_tbl) = { /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */ { diff --git a/drivers/parisc/README.dino b/drivers/parisc/README.dino index 097324f34bbe..1627426996c1 100644 --- a/drivers/parisc/README.dino +++ b/drivers/parisc/README.dino @@ -10,8 +10,7 @@ ** PCI bus. HP-supplied graphics cards that utilize the PCI bus are ** not affected." ** -** REVISIT: "go/pci_defect" link below is stale. -** HP Internal can use <http://hpfcdma.fc.hp.com:80/Dino/> +** http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?locale=en_US&prodTypeId=12454&prodSeriesId=44443 ** ** Product First Good Serial Number ** C200/C240 (US) US67350000 diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 0950fa40684f..8d62fb76cd41 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2599,7 +2599,7 @@ static int __devinit sio_ite_8872_probe(struct pci_dev *pdev, int autoirq, printk(KERN_INFO "parport_pc: ITE8873 found (1S)\n"); return 0; case 0x8: - DPRINTK(KERN_DEBUG "parport_pc: ITE8874 found (2S)\n"); + printk(KERN_INFO "parport_pc: ITE8874 found (2S)\n"); return 0; default: printk(KERN_INFO "parport_pc: unknown ITE887x\n"); diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 857ae01734a6..cc96c7142dac 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -226,6 +226,7 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82439TX, quir * VIA Apollo KT133 needs PCI latency patch * Made according to a windows driver based patch by George E. Breese * see PCI Latency Adjust on http://www.viahardware.com/download/viatweak.shtm + * and http://www.georgebreese.com/net/software/#PCI * Also see http://www.au-ja.org/review-kt133a-1-en.phtml for * the info on which Mr Breese based his work. * @@ -1016,7 +1017,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA, 0x605, quirk_transparent_bridge) /* * Common misconfiguration of the MediaGX/Geode PCI master that will * reduce PCI bandwidth from 70MB/s to 25MB/s. See the GXM/GXLV/GX1 - * datasheets found at http://www.national.com/ds/GX for info on what + * datasheets found at http://www.national.com/analog for info on what * these bits do. <christer@weinigel.se> */ static void quirk_mediagx_master(struct pci_dev *dev) diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c index 408dbaa080a1..9dc565c615bd 100644 --- a/drivers/pcmcia/yenta_socket.c +++ b/drivers/pcmcia/yenta_socket.c @@ -1072,7 +1072,7 @@ static void yenta_config_init(struct yenta_socket *socket) * invisible during PCI scans because of a misconfigured subordinate number * of the parent brige - some BIOSes seem to be too lazy to set it right. * Does the fixup carefully by checking how far it can go without conflicts. - * See http\://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. + * See http://bugzilla.kernel.org/show_bug.cgi?id=2944 for more information. */ static void yenta_fixup_parent_bridge(struct pci_bus *cardbus_bridge) { diff --git a/drivers/pnp/pnpbios/proc.c b/drivers/pnp/pnpbios/proc.c index 2d8ac43f78e8..bc89f392a629 100644 --- a/drivers/pnp/pnpbios/proc.c +++ b/drivers/pnp/pnpbios/proc.c @@ -11,7 +11,6 @@ * * The .../escd file is utilized by the lsescd utility written by * Gunther Mayer. - * http://home.t-online.de/home/gunther.mayer/lsescd * * The .../legacy_device_resources file is not used yet. * diff --git a/drivers/rtc/rtc-nuc900.c b/drivers/rtc/rtc-nuc900.c index 62de66af0a68..ddb0857e15a4 100644 --- a/drivers/rtc/rtc-nuc900.c +++ b/drivers/rtc/rtc-nuc900.c @@ -274,7 +274,7 @@ static int __devinit nuc900_rtc_probe(struct platform_device *pdev) nuc900_rtc->rtcdev = rtc_device_register(pdev->name, &pdev->dev, &nuc900_rtc_ops, THIS_MODULE); if (IS_ERR(nuc900_rtc->rtcdev)) { - dev_err(&pdev->dev, "rtc device register faild\n"); + dev_err(&pdev->dev, "rtc device register failed\n"); err = PTR_ERR(nuc900_rtc->rtcdev); goto fail3; } diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index 85bfd8794856..e82d427ff5eb 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2197,7 +2197,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense) /* ***************************************************************************** - * main ERP control fuctions (24 and 32 byte sense) + * main ERP control functions (24 and 32 byte sense) ***************************************************************************** */ diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 66360c24bd48..59b4ecfb967b 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1190,7 +1190,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) goto out_err2; } /* - * dasd_eckd_vaildate_server is done on the first device that + * dasd_eckd_validate_server is done on the first device that * is found for an LCU. All later other devices have to wait * for it, so they will read the correct feature codes. */ @@ -1216,7 +1216,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) "Read device characteristic failed, rc=%d", rc); goto out_err3; } - /* find the vaild cylinder size */ + /* find the valid cylinder size */ if (private->rdc_data.no_cyl == LV_COMPAT_CYL && private->rdc_data.long_no_cyl) private->real_cyl = private->rdc_data.long_no_cyl; diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index fc993acf99b6..deff2c3361e4 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -31,7 +31,7 @@ debug_info_t *TAPE_DBF_AREA = NULL; EXPORT_SYMBOL(TAPE_DBF_AREA); /******************************************************************* - * Error Recovery fuctions: + * Error Recovery functions: * - Read Opposite: implemented * - Read Device (buffered) log: BRA * - Read Library log: BRA @@ -798,7 +798,7 @@ tape_3590_done(struct tape_device *device, struct tape_request *request) } /* - * This fuction is called, when error recovery was successfull + * This function is called, when error recovery was successful */ static inline int tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) @@ -809,7 +809,7 @@ tape_3590_erp_succeded(struct tape_device *device, struct tape_request *request) } /* - * This fuction is called, when error recovery was not successfull + * This function is called, when error recovery was not successful */ static inline int tape_3590_erp_failed(struct tape_device *device, struct tape_request *request, diff --git a/drivers/s390/char/vmcp.c b/drivers/s390/char/vmcp.c index 0e7cb1a84151..31a3ccbb6495 100644 --- a/drivers/s390/char/vmcp.c +++ b/drivers/s390/char/vmcp.c @@ -47,7 +47,7 @@ static int vmcp_release(struct inode *inode, struct file *file) { struct vmcp_session *session; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; file->private_data = NULL; free_pages((unsigned long)session->response, get_order(session->bufsize)); kfree(session); @@ -94,7 +94,7 @@ vmcp_write(struct file *file, const char __user *buff, size_t count, return -EFAULT; } cmd[count] = '\0'; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; if (mutex_lock_interruptible(&session->mutex)) { kfree(cmd); return -ERESTARTSYS; @@ -136,7 +136,7 @@ static long vmcp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) int __user *argp; int temp; - session = (struct vmcp_session *)file->private_data; + session = file->private_data; if (is_compat_task()) argp = compat_ptr(arg); else diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 2e9632e2c98b..8616496ffc02 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -116,7 +116,7 @@ config CHR_DEV_OSST <http://www.tldp.org/docs.html#howto> and <file:Documentation/scsi/osst.txt> in the kernel source. More info on the OnStream driver may be found on - <http://linux1.onstream.nl/test/> + <http://sourceforge.net/projects/osst/> Please also have a look at the standard st docu, as most of it applies to osst as well. @@ -156,9 +156,9 @@ config CHR_DEV_SG directly, so you need some additional software which knows how to talk to these devices using the SCSI protocol: - For scanners, look at SANE (<http://www.mostang.com/sane/>). For CD + For scanners, look at SANE (<http://www.sane-project.org/>). For CD writer software look at Cdrtools - (<http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/cdrecord.html>) + (<http://cdrecord.berlios.de/private/cdrecord.html>) and for burning a "disk at once": CDRDAO (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). @@ -951,6 +951,7 @@ config SCSI_IPS ---help--- This is support for the IBM ServeRAID hardware RAID controllers. See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> + and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> for more information. If this driver does not work correctly without modification please contact the author by email at <ipslinux@adaptec.com>. @@ -1610,7 +1611,7 @@ config SCSI_DEBUG host adapter with one dummy SCSI disk. Each dummy disk uses kernel RAM as storage (i.e. it is a ramdisk). To save space when multiple dummy disks are simulated, they share the same kernel RAM for - their storage. See <http://www.torque.net/sg/sdebug.html> for more + their storage. See <http://sg.danny.cz/sg/sdebug26.html> for more information. This driver is primarily of use to those testing the SCSI and block subsystems. If unsure, say N. diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c index dae46d779c7b..29c0ed1cf507 100644 --- a/drivers/scsi/aacraid/linit.c +++ b/drivers/scsi/aacraid/linit.c @@ -771,7 +771,7 @@ static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long { if (!capable(CAP_SYS_RAWIO)) return -EPERM; - return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg); + return aac_compat_do_ioctl(file->private_data, cmd, arg); } #endif diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c index c3d7174e3469..a345dde16c86 100644 --- a/drivers/scsi/lpfc/lpfc_hbadisc.c +++ b/drivers/scsi/lpfc/lpfc_hbadisc.c @@ -5509,7 +5509,7 @@ lpfc_get_rec_conf23(uint8_t *buff, uint32_t size, uint8_t rec_type) * @buff: Buffer containing config region 23 data. * @size: Size of the data buffer. * - * This fuction parse the FCoE config parameters in config region 23 and + * This function parses the FCoE config parameters in config region 23 and * populate driver data structure with the parameters. */ void diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 5428d53f5a13..909ed9ed24c0 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -212,7 +212,7 @@ static void sg_put_dev(Sg_device *sdp); static int sg_allow_access(struct file *filp, unsigned char *cmd) { - struct sg_fd *sfp = (struct sg_fd *)filp->private_data; + struct sg_fd *sfp = filp->private_data; if (sfp->parentdp->device->type == TYPE_SCANNER) return 0; diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 167c4a6ccbc3..4d8e14b7aa93 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -919,7 +919,7 @@ static int broken_efr(struct uart_8250_port *up) /* * Exar ST16C2550 "A2" devices incorrectly detect as * having an EFR, and report an ID of 0x0201. See - * http://www.exar.com/info.php?pdf=dan180_oct2004.pdf + * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html */ if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16) return 1; diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c index 6f1b51e231e4..e95c524d9d18 100644 --- a/drivers/serial/bfin_sport_uart.c +++ b/drivers/serial/bfin_sport_uart.c @@ -10,7 +10,7 @@ /* * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out. diff --git a/drivers/serial/bfin_sport_uart.h b/drivers/serial/bfin_sport_uart.h index 9ce253e381d2..6d06ce1d5675 100644 --- a/drivers/serial/bfin_sport_uart.h +++ b/drivers/serial/bfin_sport_uart.h @@ -10,7 +10,7 @@ /* * This driver and the hardware supported are in term of EE-191 of ADI. - * http://www.analog.com/UploadedFiles/Application_Notes/399447663EE191.pdf + * http://www.analog.com/static/imported-files/application_notes/EE191.pdf * This application note describe how to implement a UART on a Sharc DSP, * but this driver is implemented on Blackfin Processor. * Transmit Frame Sync is not used by this driver to transfer data out. diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c index c4bf54bb3fc7..d2fce865b731 100644 --- a/drivers/serial/uartlite.c +++ b/drivers/serial/uartlite.c @@ -44,7 +44,7 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); * Register definitions * * For register details see datasheet: - * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf + * http://www.xilinx.com/support/documentation/ip_documentation/opb_uartlite.pdf */ #define ULITE_RX 0x00 diff --git a/drivers/staging/asus_oled/README b/drivers/staging/asus_oled/README index 96b9717f168f..0d82a6d5fa58 100644 --- a/drivers/staging/asus_oled/README +++ b/drivers/staging/asus_oled/README @@ -2,7 +2,7 @@ Driver for Asus OLED display present in some Asus laptops. The code of this driver is based on 'asusoled' program taken from - https://launchpad.net/asusoled/. I just wanted to have a simple + <http://lapsus.berlios.de/asus_oled.html>. I just wanted to have a simple kernel driver for controlling this device, but I didn't know how to do that. Now I know ;) Also, that program can not be used with usbhid loaded, which means no USB mouse/keyboard while diff --git a/drivers/staging/asus_oled/asus_oled.c b/drivers/staging/asus_oled/asus_oled.c index 5b279fb30f3f..8c95d8c2a4f4 100644 --- a/drivers/staging/asus_oled/asus_oled.c +++ b/drivers/staging/asus_oled/asus_oled.c @@ -24,7 +24,7 @@ * * * Asus OLED support is based on asusoled program taken from - * https://launchpad.net/asusoled/. + * <http://lapsus.berlios.de/asus_oled.html>. * * */ diff --git a/drivers/staging/comedi/drivers/cb_pcimdas.c b/drivers/staging/comedi/drivers/cb_pcimdas.c index ced346a7cae3..78b1410ba4f6 100644 --- a/drivers/staging/comedi/drivers/cb_pcimdas.c +++ b/drivers/staging/comedi/drivers/cb_pcimdas.c @@ -37,7 +37,7 @@ Configuration Options: Developed from cb_pcidas and skel by Richard Bytheway (mocelet@sucs.org). Only supports DIO, AO and simple AI in it's present form. No interrupts, multi channel or FIFO AI, although the card looks like it could support this. -See http://www.measurementcomputing.com/PDFManuals/pcim-das1602_16.pdf for more details. +See http://www.mccdaq.com/PDFs/Manuals/pcim-das1602-16.pdf for more details. */ #include "../comedidev.h" diff --git a/drivers/staging/comedi/drivers/daqboard2000.c b/drivers/staging/comedi/drivers/daqboard2000.c index 6af6c8323d56..82be77daa7d7 100644 --- a/drivers/staging/comedi/drivers/daqboard2000.c +++ b/drivers/staging/comedi/drivers/daqboard2000.c @@ -50,8 +50,8 @@ Configuration options: With some help from our swedish distributor, we got the Windows sourcecode for the card, and here are the findings so far. - 1. A good document that describes the PCI interface chip is found at: - http://plx.plxtech.com/download/9080/databook/9080db-106.pdf + 1. A good document that describes the PCI interface chip is 9080db-106.pdf + available from http://www.plxtech.com/products/io/pci9080 2. The initialization done so far is: a. program the FPGA (windows code sans a lot of error messages) diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 3acf7e62bec4..1411dd8f4e7c 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -37,7 +37,7 @@ boards has not yet been added to the driver, mainly due to the fact that I don't know the device id numbers. If you have one of these boards, -please file a bug report at https://bugs.comedi.org/ +please file a bug report at http://comedi.org/ so I can get the necessary information from you. The 1200 series boards have onboard calibration dacs for correcting diff --git a/drivers/staging/comedi/drivers/ni_mio_common.c b/drivers/staging/comedi/drivers/ni_mio_common.c index bd16f913af23..986ef6712989 100644 --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -34,7 +34,7 @@ 340747b.pdf AT-MIO E series Register Level Programmer Manual 341079b.pdf PCI E Series RLPM 340934b.pdf DAQ-STC reference manual - 67xx and 611x registers (from http://www.ni.com/pdf/daq/us) + 67xx and 611x registers (from ftp://ftp.ni.com/support/daq/mhddk/documentation/) release_ni611x.pdf release_ni67xx.pdf Other possibly relevant info: diff --git a/drivers/staging/comedi/drivers/plx9080.h b/drivers/staging/comedi/drivers/plx9080.h index 485d63f99293..0d254a1b78a7 100644 --- a/drivers/staging/comedi/drivers/plx9080.h +++ b/drivers/staging/comedi/drivers/plx9080.h @@ -13,7 +13,7 @@ * ******************************************************************** * - * Copyright (C) 1999 RG Studio s.c., http://www.rgstudio.com.pl/ + * Copyright (C) 1999 RG Studio s.c. * Written by Krzysztof Halasa <khc@rgstudio.com.pl> * * Portions (C) SBE Inc., used by permission. diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c index 0367d2b9e2fa..a49a7c566d37 100644 --- a/drivers/staging/comedi/drivers/rtd520.c +++ b/drivers/staging/comedi/drivers/rtd520.c @@ -59,7 +59,7 @@ Configuration options: Data sheet: http://www.rtdusa.com/pdf/dm7520.pdf Example source: http://www.rtdusa.com/examples/dm/dm7520.zip Call them and ask for the register level manual. - PCI chip: http://www.plxtech.com/products/toolbox/9080.htm + PCI chip: http://www.plxtech.com/products/io/pci9080 Notes: This board is memory mapped. There is some IO stuff, but it isn't needed. diff --git a/drivers/staging/quickstart/quickstart.c b/drivers/staging/quickstart/quickstart.c index 66122479d529..ba8f670ec0a7 100644 --- a/drivers/staging/quickstart/quickstart.c +++ b/drivers/staging/quickstart/quickstart.c @@ -5,8 +5,7 @@ * Copyright (C) 2007-2010 Angelo Arrifano <miknix@gmail.com> * * Information gathered from disassebled dsdt and from here: - * "http://download.microsoft.com/download/9/c/5/ - * 9c5b2167-8017-4bae-9fde-d599bac8184a/DirAppLaunch_Vista.doc" + * <http://www.microsoft.com/whdc/system/platform/firmware/DirAppLaunch.mspx> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig index 1da73ecd9799..bb440792a1b7 100644 --- a/drivers/uio/Kconfig +++ b/drivers/uio/Kconfig @@ -17,9 +17,9 @@ config UIO_CIF depends on PCI help Driver for Hilscher CIF DeviceNet and Profibus cards. This - driver requires a userspace component that handles all of the - heavy lifting and can be found at: - http://www.osadl.org/projects/downloads/UIO/user/cif-* + driver requires a userspace component called cif that handles + all of the heavy lifting and can be found at: + <http://www.osadl.org/projects/downloads/UIO/user/> To compile this driver as a module, choose M here: the module will be called uio_cif. diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 387e503b9d14..bdec36acd0fa 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1266,7 +1266,6 @@ write_in: csr |= AT91_UDP_TXPKTRDY; __raw_writel(csr, creg); udc->req_pending = 0; - return; } static void handle_ep0(struct at91_udc *udc) diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c index 1f48ceb55a77..00975ed903d1 100644 --- a/drivers/usb/gadget/f_audio.c +++ b/drivers/usb/gadget/f_audio.c @@ -317,8 +317,6 @@ static void f_audio_playback_work(struct work_struct *data) u_audio_playback(&audio->card, play_buf->buf, play_buf->actual); f_audio_buffer_free(play_buf); - - return; } static int f_audio_out_ep_complete(struct usb_ep *ep, struct usb_request *req) diff --git a/drivers/usb/gadget/f_hid.c b/drivers/usb/gadget/f_hid.c index 2b98bd26364b..4f891eddd060 100644 --- a/drivers/usb/gadget/f_hid.c +++ b/drivers/usb/gadget/f_hid.c @@ -318,8 +318,6 @@ static void hidg_set_report_complete(struct usb_ep *ep, struct usb_request *req) spin_unlock(&hidg->spinlock); wake_up(&hidg->read_queue); - - return; } static int hidg_setup(struct usb_function *f, @@ -413,8 +411,6 @@ static void hidg_disable(struct usb_function *f) usb_ep_disable(hidg->in_ep); hidg->in_ep->driver_data = NULL; - - return; } static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index c16b402a876b..4c55eda4bd20 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -287,8 +287,6 @@ static void dr_controller_run(struct fsl_udc *udc) temp = fsl_readl(&dr_regs->usbcmd); temp |= USB_CMD_RUN_STOP; fsl_writel(temp, &dr_regs->usbcmd); - - return; } static void dr_controller_stop(struct fsl_udc *udc) @@ -308,8 +306,6 @@ static void dr_controller_stop(struct fsl_udc *udc) tmp = fsl_readl(&dr_regs->usbcmd); tmp &= ~USB_CMD_RUN_STOP; fsl_writel(tmp, &dr_regs->usbcmd); - - return; } static void dr_ep_setup(unsigned char ep_num, unsigned char dir, @@ -416,8 +412,6 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, p_QH->max_pkt_length = cpu_to_le32(tmp); p_QH->next_dtd_ptr = 1; p_QH->size_ioc_int_sts = 0; - - return; } /* Setup qh structure and ep register for ep0. */ diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 027d66f81620..2efd6732d130 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1394,8 +1394,6 @@ static void pxa_ep_fifo_flush(struct usb_ep *_ep) } spin_unlock_irqrestore(&ep->lock, flags); - - return; } /** diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 5b314041dfa9..d3cdffea9c8a 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -918,8 +918,6 @@ void rndis_deregister(int configNr) if (configNr >= RNDIS_MAX_CONFIGS) return; rndis_per_dev_params[configNr].used = 0; - - return; } int rndis_set_param_dev(u8 configNr, struct net_device *dev, u16 *cdc_filter) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15fe3ecd203b..2adae8e39bba 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1095,7 +1095,6 @@ nogood: ep->hcpriv = NULL; done: spin_unlock_irqrestore (&ehci->lock, flags); - return; } static void diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 1dfb2c8f7707..e49b75a78000 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -27,8 +27,8 @@ * * 32 transfer descriptors (called ETDs) * * 4Kb of Data memory * - * The data memory is shared between the host and fuction controlers - * (but this driver only supports the host controler) + * The data memory is shared between the host and function controllers + * (but this driver only supports the host controller) * * So setting up a transfer involves: * * Allocating a ETD diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 3b5785032a10..f3713f43f3fe 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -370,7 +370,6 @@ sanitize: } ep->hcpriv = NULL; spin_unlock_irqrestore (&ohci->lock, flags); - return; } static int ohci_get_frame (struct usb_hcd *hcd) diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index d32c3eae99cb..32149be4ad8e 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -544,8 +544,6 @@ static void oxu_buf_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd) qtd->buffer = NULL; spin_unlock(&oxu->mem_lock); - - return; } static inline void ehci_qtd_init(struct ehci_qtd *qtd, dma_addr_t dma) @@ -571,8 +569,6 @@ static inline void oxu_qtd_free(struct oxu_hcd *oxu, struct ehci_qtd *qtd) oxu->qtd_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static struct ehci_qtd *ehci_qtd_alloc(struct oxu_hcd *oxu) @@ -615,8 +611,6 @@ static void oxu_qh_free(struct oxu_hcd *oxu, struct ehci_qh *qh) oxu->qh_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static void qh_destroy(struct kref *kref) @@ -693,8 +687,6 @@ static void oxu_murb_free(struct oxu_hcd *oxu, struct oxu_murb *murb) oxu->murb_used[index] = 0; spin_unlock(&oxu->mem_lock); - - return; } static struct oxu_murb *oxu_murb_alloc(struct oxu_hcd *oxu) @@ -3070,7 +3062,6 @@ nogood: ep->hcpriv = NULL; done: spin_unlock_irqrestore(&oxu->lock, flags); - return; } static int oxu_get_frame(struct usb_hcd *hcd) diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 464ed977b45d..4c502c890ebd 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -342,8 +342,6 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) writel(0x3f, op_reg_base + EHCI_USBSTS); iounmap(base); - - return; } /* diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5b31bae92dbc..fab764946c74 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -316,7 +316,6 @@ static void u132_ring_requeue_work(struct u132 *u132, struct u132_ring *ring, } else if (queue_delayed_work(workqueue, &ring->scheduler, 0)) return; kref_put(&u132->kref, u132_hcd_delete); - return; } static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring, @@ -324,7 +323,6 @@ static void u132_ring_queue_work(struct u132 *u132, struct u132_ring *ring, { kref_get(&u132->kref); u132_ring_requeue_work(u132, ring, delta); - return; } static void u132_ring_cancel_work(struct u132 *u132, struct u132_ring *ring) @@ -543,7 +541,6 @@ static void u132_hcd_giveback_urb(struct u132 *u132, struct u132_endp *endp, mutex_unlock(&u132->scheduler_lock); u132_endp_put_kref(u132, endp); usb_hcd_giveback_urb(hcd, urb, status); - return; } static void u132_hcd_forget_urb(struct u132 *u132, struct u132_endp *endp, @@ -574,8 +571,8 @@ static void u132_hcd_abandon_urb(struct u132 *u132, struct u132_endp *endp, endp->active = 0; spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); kfree(urbq); - } usb_hcd_giveback_urb(hcd, urb, status); - return; + } + usb_hcd_giveback_urb(hcd, urb, status); } static inline int edset_input(struct u132 *u132, struct u132_ring *ring, @@ -3085,7 +3082,6 @@ static void u132_initialise(struct u132 *u132, struct platform_device *pdev) u132->endp[endps] = NULL; mutex_unlock(&u132->sw_lock); - return; } static int __devinit u132_probe(struct platform_device *pdev) diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 3a6bcd5fee09..5a47805d9580 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -398,7 +398,6 @@ void mts_int_submit_urb (struct urb* transfer, context->srb->result = DID_ERROR << 16; mts_transfer_cleanup(transfer); } - return; } @@ -409,7 +408,6 @@ static void mts_transfer_cleanup( struct urb *transfer ) if ( likely(context->final_callback != NULL) ) context->final_callback(context->srb); - } static void mts_transfer_done( struct urb *transfer ) @@ -420,8 +418,6 @@ static void mts_transfer_done( struct urb *transfer ) context->srb->result |= (unsigned)(*context->scsi_status)<<1; mts_transfer_cleanup(transfer); - - return; } @@ -452,8 +448,6 @@ static void mts_data_done( struct urb* transfer ) } mts_get_status(transfer); - - return; } @@ -496,8 +490,6 @@ static void mts_command_done( struct urb *transfer ) mts_get_status(transfer); } } - - return; } static void mts_do_sg (struct urb* transfer) @@ -522,7 +514,6 @@ static void mts_do_sg (struct urb* transfer) sg[context->fragment].length, context->fragment + 1 == scsi_sg_count(context->srb) ? mts_data_done : mts_do_sg); - return; } static const u8 mts_read_image_sig[] = { 0x28, 00, 00, 00 }; diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index c8eec9c2d89e..7839c98fa742 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -456,7 +456,6 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi) { ftdi_command_queue_work(ftdi, 0); - return; } static void ftdi_elan_command_work(struct work_struct *work) @@ -483,7 +482,6 @@ static void ftdi_elan_command_work(struct work_struct *work) static void ftdi_elan_kick_respond_queue(struct usb_ftdi *ftdi) { ftdi_respond_queue_work(ftdi, 0); - return; } static void ftdi_elan_respond_work(struct work_struct *work) diff --git a/drivers/usb/mon/mon_main.c b/drivers/usb/mon/mon_main.c index 812dc288bb8c..10405119985c 100644 --- a/drivers/usb/mon/mon_main.c +++ b/drivers/usb/mon/mon_main.c @@ -90,7 +90,6 @@ static void mon_bus_submit(struct mon_bus *mbus, struct urb *urb) r->rnf_submit(r->r_data, urb); } spin_unlock_irqrestore(&mbus->lock, flags); - return; } static void mon_submit(struct usb_bus *ubus, struct urb *urb) @@ -117,7 +116,6 @@ static void mon_bus_submit_error(struct mon_bus *mbus, struct urb *urb, int erro r->rnf_error(r->r_data, urb, error); } spin_unlock_irqrestore(&mbus->lock, flags); - return; } static void mon_submit_error(struct usb_bus *ubus, struct urb *urb, int error) diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 95058109f9fa..c2b29761fa98 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -176,7 +176,7 @@ config USB_SERIAL_VISOR help Say Y here if you want to connect to your HandSpring Visor, Palm m500 or m505 through its USB docking station. See - <http://usbvisor.sourceforge.net/> for more information on using this + <http://usbvisor.sourceforge.net/index.php3> for more information on using this driver. To compile this driver as a module, choose M here: the @@ -289,7 +289,7 @@ config USB_SERIAL_KEYSPAN and was developed with their support. You must also include firmware to support your particular device(s). - See <http://misc.nu/hugh/keyspan.html> for more information. + See <http://blemings.org/hugh/keyspan.html> for more information. To compile this driver as a module, choose M here: the module will be called keyspan. diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index f5d06746cc3b..2edf238b00b9 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -1320,8 +1320,6 @@ continue_read: cypress_set_dead(port); } } - - return; } /* cypress_read_int_callback */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 37b57c785cc7..89a9a5847803 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2108,7 +2108,6 @@ static void ftdi_set_termios(struct tty_struct *tty, } } - return; } static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index cf1aea1b9ee7..7dfe02f1fb6a 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -46,7 +46,7 @@ #define FTDI_USINT_RS232_PID 0xb812 /* Navigator RS232 and CONFIG lines */ /* OOCDlink by Joern Kaipf <joernk@web.de> - * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ + * (http://www.joernonline.de/) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ /* Luminary Micro Stellaris Boards, VID = FTDI_VID */ @@ -336,7 +336,7 @@ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ /* ACT Solutions HomePro ZWave interface - (http://www.act-solutions.com/HomePro.htm) */ + (http://www.act-solutions.com/HomePro-Product-Matrix.html) */ #define FTDI_ACTZWAVE_PID 0xF2D0 /* @@ -367,7 +367,7 @@ #define FTDI_SUUNTO_SPORTS_PID 0xF680 /* Suunto Sports instrument */ /* USB-UIRT - An infrared receiver and transmitter using the 8U232AM chip */ -/* http://home.earthlink.net/~jrhees/USBUIRT/index.htm */ +/* http://www.usbuirt.com/ */ #define FTDI_USB_UIRT_PID 0xF850 /* Product Id */ /* CCS Inc. ICDU/ICDU40 product ID - @@ -396,7 +396,7 @@ */ #define FTDI_HE_TIRA1_PID 0xFA78 /* Tira-1 IR transceiver */ -/* Inside Accesso contactless reader (http://www.insidefr.com) */ +/* Inside Accesso contactless reader (http://www.insidecontactless.com/) */ #define INSIDE_ACCESSO 0xFAD0 /* @@ -635,14 +635,14 @@ /* * JETI SPECTROMETER SPECBOS 1201 - * http://www.jeti.com/products/sys/scb/scb1201.php + * http://www.jeti.com/cms/index.php/instruments/other-instruments/specbos-2101 */ #define JETI_VID 0x0c6c #define JETI_SPC1201_PID 0x04b2 /* * FTDI USB UART chips used in construction projects from the - * Elektor Electronics magazine (http://elektor-electronics.co.uk) + * Elektor Electronics magazine (http://www.elektor.com/) */ #define ELEKTOR_VID 0x0C7D #define ELEKTOR_FT323R_PID 0x0005 /* RFID-Reader, issue 09-2006 */ diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c index a42b29a695b2..26710b189918 100644 --- a/drivers/usb/serial/garmin_gps.c +++ b/drivers/usb/serial/garmin_gps.c @@ -1264,7 +1264,6 @@ static void garmin_read_bulk_callback(struct urb *urb) garmin_data_p->flags &= ~FLAGS_BULK_IN_ACTIVE; spin_unlock_irqrestore(&garmin_data_p->lock, flags); } - return; } diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index a0ab78ada25e..cd769ef24f8a 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1467,8 +1467,6 @@ static void edge_throttle(struct tty_struct *tty) if (status != 0) return; } - - return; } @@ -1775,8 +1773,6 @@ static void edge_break(struct tty_struct *tty, int break_state) dbg("%s - error sending break set/clear command.", __func__); } - - return; } @@ -2047,7 +2043,6 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial, dbg("%s - Unrecognized IOSP status code %u", __func__, code); break; } - return; } @@ -2100,8 +2095,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 newMsr) /* Save the new modem status */ edge_port->shadowMSR = newMsr & 0xf0; - - return; } @@ -2148,8 +2141,6 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData, icount->parity++; if (newLsr & LSR_FRM_ERR) icount->frame++; - - return; } @@ -2725,7 +2716,6 @@ static void change_port_settings(struct tty_struct *tty, baud = tty_termios_baud_rate(old_termios); tty_encode_baud_rate(tty, baud, baud); } - return; } @@ -2927,7 +2917,6 @@ static void load_application_firmware(struct edgeport_serial *edge_serial) 0x40, 0x4000, 0x0001, NULL, 0, 3000); release_firmware(fw); - return; } diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 4dad27a0f22a..22506b095c4f 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -1571,8 +1571,6 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) } } tty_kref_put(tty); - - return; } static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, @@ -2424,7 +2422,6 @@ static void change_port_settings(struct tty_struct *tty, dbg("%s - error %d when trying to write config to device", __func__, status); kfree(config); - return; } static void edge_set_termios(struct tty_struct *tty, @@ -2445,7 +2442,6 @@ static void edge_set_termios(struct tty_struct *tty, return; /* change the port settings to the new ones specified */ change_port_settings(tty, edge_port, old_termios); - return; } static int edge_tiocmset(struct tty_struct *tty, struct file *file, diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index efc72113216b..12ed594f5f80 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -807,7 +807,6 @@ static void read_rxcmd_callback(struct urb *urb) iuu_uart_read_callback, port); result = usb_submit_urb(port->read_urb, GFP_ATOMIC); dbg("%s - submit result = %d", __func__, result); - return; } static int iuu_uart_on(struct usb_serial_port *port) diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 297163c3c610..0791778a66f3 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -9,7 +9,7 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - See http://misc.nu/hugh/keyspan.html for more information. + See http://blemings.org/hugh/keyspan.html for more information. Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. diff --git a/drivers/usb/serial/keyspan.h b/drivers/usb/serial/keyspan.h index bf3297ddd186..2d8baf6ac472 100644 --- a/drivers/usb/serial/keyspan.h +++ b/drivers/usb/serial/keyspan.h @@ -9,7 +9,7 @@ the Free Software Foundation; either version 2 of the License, or (at your option) any later version. - See http://misc.nu/hugh/keyspan.html for more information. + See http://blemings.org/hugh/keyspan.html for more information. Code in this driver inspired by and in a number of places taken from Brian Warner's original Keyspan-PDA driver. diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index 185fe9a7d4e0..a10dd5676ccc 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -292,7 +292,6 @@ static void keyspan_pda_rx_unthrottle(struct tty_struct *tty) port->interrupt_in_urb->dev = port->serial->dev; if (usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL)) dbg(" usb_submit_urb(read urb) failed"); - return; } diff --git a/drivers/usb/serial/mct_u232.h b/drivers/usb/serial/mct_u232.h index 3a3f5e6b8f96..d325bb8cb583 100644 --- a/drivers/usb/serial/mct_u232.h +++ b/drivers/usb/serial/mct_u232.h @@ -10,10 +10,9 @@ * * This driver is for the device MCT USB-RS232 Converter (25 pin, Model No. * U232-P25) from Magic Control Technology Corp. (there is also a 9 pin - * Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further - * information. The properties of this device are listed at the end of this - * file. This device is available from various distributors. I know Hana, - * http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25. + * Model No. U232-P9). See http://www.mct.com.tw/products/product_us232.html + * for further information. The properties of this device are listed at the end + * of this file. This device was used in the Dlink DSB-S25. * * All of the information about the device was acquired by using SniffUSB * on Windows98. The technical details of the reverse engineering are @@ -458,7 +457,7 @@ static int mct_u232_calculate_baud_rate(struct usb_serial *serial, * embedded UART. Exhaustive documentation for these is available at: * * http://www.semiconductors.philips.com/pip/p87c52ubaa - * http://www.semiconductors.philips.com/pip/pdiusbd12 + * http://www.nxp.com/acrobat_download/various/PDIUSBD12_PROGRAMMING_GUIDE.pdf * * Thanks to Julian Highfield for the pointer to the Philips database. * diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index fd0b6414f459..7d3bc9a3e2b6 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -827,7 +827,6 @@ exit: dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - return; } /* @@ -907,7 +906,6 @@ exit: dev_err(&urb->dev->dev, "%s - Error %d submitting control urb\n", __func__, result); - return; } /* @@ -1227,8 +1225,6 @@ static void mos7720_break(struct tty_struct *tty, int break_state) mos7720_port->shadowLCR = data; write_mos_reg(serial, port->number - port->serial->minor, LCR, mos7720_port->shadowLCR); - - return; } /* @@ -1746,7 +1742,6 @@ static void change_port_settings(struct tty_struct *tty, dbg("usb_submit_urb(read bulk) failed, status = %d", status); } - return; } /* @@ -1803,7 +1798,6 @@ static void mos7720_set_termios(struct tty_struct *tty, dbg("usb_submit_urb(read bulk) failed, status = %d", status); } - return; } /* diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index 93dad5853cd5..5627993f9e41 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1367,8 +1367,6 @@ static void mos7840_break(struct tty_struct *tty, int break_state) mos7840_port->shadowLCR); mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, mos7840_port->shadowLCR); - - return; } /***************************************************************************** @@ -1599,8 +1597,6 @@ static void mos7840_throttle(struct tty_struct *tty) if (status < 0) return; } - - return; } /***************************************************************************** @@ -2075,8 +2071,6 @@ static void mos7840_change_port_settings(struct tty_struct *tty, mos7840_port->delta_msr_cond = 1; dbg("mos7840_change_port_settings mos7840_port->shadowLCR is End %x", mos7840_port->shadowLCR); - - return; } /***************************************************************************** @@ -2145,7 +2139,6 @@ static void mos7840_set_termios(struct tty_struct *tty, mos7840_port->read_urb_busy = false; } } - return; } /***************************************************************************** diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c index 89c724c0ac0a..60f38d5e64fc 100644 --- a/drivers/usb/serial/omninet.c +++ b/drivers/usb/serial/omninet.c @@ -246,8 +246,6 @@ static void omninet_read_bulk_callback(struct urb *urb) dev_err(&port->dev, "%s - failed resubmitting read urb, error %d\n", __func__, result); - - return; } static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port, diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index d47b56e9e8ce..7481ff8a49e4 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -620,8 +620,6 @@ static void sierra_indat_callback(struct urb *urb) dev_err(&port->dev, "resubmit read urb failed." "(%d)\n", err); } - - return; } static void sierra_instat_callback(struct urb *urb) diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 329d311a35d9..765aa983bf58 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -441,7 +441,6 @@ static void spcp8x5_set_termios(struct tty_struct *tty, spcp8x5_set_workMode(serial->dev, 0x000a, SET_WORKING_MODE_U2C, priv->type); } - return; } /* open the serial port. do some usb system call. set termios and get the line diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c index 0c70b4a621bb..fbc946797801 100644 --- a/drivers/usb/serial/usb_wwan.c +++ b/drivers/usb/serial/usb_wwan.c @@ -234,7 +234,6 @@ static void usb_wwan_indat_callback(struct urb *urb) } } - return; } static void usb_wwan_outdat_callback(struct urb *urb) diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index 12ed8209ca72..3f9ac88d588c 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -655,8 +655,6 @@ static void whiteheat_release(struct usb_serial *serial) } kfree(info); } - - return; } static int whiteheat_open(struct tty_struct *tty, struct usb_serial_port *port) @@ -955,8 +953,6 @@ static void whiteheat_throttle(struct tty_struct *tty) spin_lock_irq(&info->lock); info->flags |= THROTTLED; spin_unlock_irq(&info->lock); - - return; } @@ -975,8 +971,6 @@ static void whiteheat_unthrottle(struct tty_struct *tty) if (actually_throttled) rx_data_softint(&info->rx_work); - - return; } diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index f2767cf2e229..49a489e03716 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -36,7 +36,7 @@ config USB_STORAGE_DATAFAB depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. - Datafab has a web page at <http://www.datafabusa.com/>. + Datafab has a web page at <http://www.datafab.com/>. If this driver is compiled as a module, it will be named ums-datafab. diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 8b31fdfefc98..dc06ff134559 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -49,7 +49,7 @@ menuconfig FB You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.txt> and the Framebuffer-HOWTO at - <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.2.html> for more + <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. Say Y here and to the driver for your graphics board below if you @@ -955,7 +955,7 @@ config FB_EPSON1355 Build in support for the SED1355 Epson Research Embedded RAMDAC LCD/CRT Controller (since redesignated as the S1D13505) as a framebuffer. Product specs at - <http://www.erd.epson.com/vdc/html/products.htm>. + <http://vdc.epson.com/>. config FB_S1D13XXX tristate "Epson S1D13XXX framebuffer support" @@ -966,7 +966,7 @@ config FB_S1D13XXX help Support for S1D13XXX framebuffer device family (currently only working with S1D13806). Product specs at - <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm> + <http://vdc.epson.com/> config FB_ATMEL tristate "AT91/AT32 LCD Controller support" @@ -1323,7 +1323,7 @@ config FB_RADEON don't need to choose this to run the Radeon in plain VGA mode. There is a product page at - http://apps.ati.com/ATIcompare/ + http://products.amd.com/en-us/GraphicCardResult.aspx config FB_RADEON_I2C bool "DDC/I2C for ATI Radeon support" @@ -1395,7 +1395,7 @@ config FB_ATY_CT Say Y here to support use of ATI's 64-bit Rage boards (or other boards based on the Mach64 CT, VT, GT, and LT chipsets) as a framebuffer device. The ATI product support page for these boards - is at <http://support.ati.com/products/pc/mach64/>. + is at <http://support.ati.com/products/pc/mach64/mach64.html>. config FB_ATY_GENERIC_LCD bool "Mach64 generic LCD support (EXPERIMENTAL)" diff --git a/drivers/video/arcfb.c b/drivers/video/arcfb.c index f3d7440f0072..3ec4923c2d84 100644 --- a/drivers/video/arcfb.c +++ b/drivers/video/arcfb.c @@ -2,7 +2,6 @@ * linux/drivers/video/arcfb.c -- FB driver for Arc monochrome LCD board * * Copyright (C) 2005, Jaya Kumar <jayalk@intworks.biz> - * http://www.intworks.biz/arclcd * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/bf54x-lq043fb.c index b020ba7f1cf2..e7d0f525041e 100644 --- a/drivers/video/bf54x-lq043fb.c +++ b/drivers/video/bf54x-lq043fb.c @@ -241,12 +241,12 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 disp = fbi->mach_info->disp; if (gpio_request(disp, DRIVER_NAME)) { - printk(KERN_ERR "Requesting GPIO %d faild\n", disp); + printk(KERN_ERR "Requesting GPIO %d failed\n", disp); return -EFAULT; } if (peripheral_request_list(eppi_req_18, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); gpio_free(disp); return -EFAULT; } @@ -256,7 +256,7 @@ static int request_ports(struct bfin_bf54xfb_info *fbi) u16 eppi_req_24[] = EPPI0_24; if (peripheral_request_list(eppi_req_24, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); peripheral_free_list(eppi_req_18); gpio_free(disp); return -EFAULT; diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/bfin-t350mcqb-fb.c index 7a50272eaab9..3cf77676947c 100644 --- a/drivers/video/bfin-t350mcqb-fb.c +++ b/drivers/video/bfin-t350mcqb-fb.c @@ -192,7 +192,7 @@ static int bfin_t350mcqb_request_ports(int action) { if (action) { if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) { - printk(KERN_ERR "Requesting Peripherals faild\n"); + printk(KERN_ERR "Requesting Peripherals failed\n"); return -EFAULT; } } else diff --git a/drivers/video/epson1355fb.c b/drivers/video/epson1355fb.c index db9713b49ce9..a268cbf1cbea 100644 --- a/drivers/video/epson1355fb.c +++ b/drivers/video/epson1355fb.c @@ -4,7 +4,7 @@ * Epson Research S1D13505 Embedded RAMDAC LCD/CRT Controller * (previously known as SED1355) * - * Cf. http://www.erd.epson.com/vdc/html/S1D13505.html + * Cf. http://vdc.epson.com/ * * * Copyright (C) Hewlett-Packard Company. All rights reserved. diff --git a/drivers/video/fbcvt.c b/drivers/video/fbcvt.c index 7293eaccd81b..7cb715dfc0e1 100644 --- a/drivers/video/fbcvt.c +++ b/drivers/video/fbcvt.c @@ -5,7 +5,7 @@ * * Based from the VESA(TM) Coordinated Video Timing Generator by * Graham Loveridge April 9, 2003 available at - * http://www.vesa.org/public/CVT/CVTd6r1.xls + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive diff --git a/drivers/video/metronomefb.c b/drivers/video/metronomefb.c index 9b3d6e4584cc..63ed3b72b01c 100644 --- a/drivers/video/metronomefb.c +++ b/drivers/video/metronomefb.c @@ -10,7 +10,7 @@ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. * * This work was made possible by help and equipment support from E-Ink - * Corporation. http://support.eink.com/community + * Corporation. http://www.eink.com/ * * This driver is written to be used with the Metronome display controller. * It is intended to be architecture independent. A board specific driver diff --git a/drivers/video/vesafb.c b/drivers/video/vesafb.c index 090aa1a9be6e..6a069d047914 100644 --- a/drivers/video/vesafb.c +++ b/drivers/video/vesafb.c @@ -253,7 +253,7 @@ static int __init vesafb_probe(struct platform_device *dev) size_vmode = vesafb_defined.yres * vesafb_fix.line_length; /* size_total -- all video memory we have. Used for mtrr - * entries, ressource allocation and bounds + * entries, resource allocation and bounds * checking. */ size_total = screen_info.lfb_size * 65536; if (vram_total) |