diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/dma/Kconfig | 9 | ||||
-rw-r--r-- | drivers/dma/Makefile | 1 | ||||
-rw-r--r-- | drivers/dma/sa11x0-dma.c | 1109 | ||||
-rw-r--r-- | drivers/gpio/gpio-sa1100.c | 1 | ||||
-rw-r--r-- | drivers/input/keyboard/jornada720_kbd.c | 1 | ||||
-rw-r--r-- | drivers/input/serio/sa1111ps2.c | 59 | ||||
-rw-r--r-- | drivers/input/touchscreen/jornada720_ts.c | 1 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 5 | ||||
-rw-r--r-- | drivers/mfd/mcp-core.c | 49 | ||||
-rw-r--r-- | drivers/mfd/mcp-sa11x0.c | 198 | ||||
-rw-r--r-- | drivers/mfd/ucb1x00-assabet.c | 46 | ||||
-rw-r--r-- | drivers/mfd/ucb1x00-core.c | 433 | ||||
-rw-r--r-- | drivers/mfd/ucb1x00-ts.c | 39 | ||||
-rw-r--r-- | drivers/mtd/maps/sa1100-flash.c | 112 | ||||
-rw-r--r-- | drivers/net/ethernet/smsc/smc91x.c | 2 | ||||
-rw-r--r-- | drivers/net/irda/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/irda/sa1100_ir.c | 953 | ||||
-rw-r--r-- | drivers/pcmcia/sa1100_neponset.c | 7 | ||||
-rw-r--r-- | drivers/pcmcia/sa1111_generic.c | 55 | ||||
-rw-r--r-- | drivers/rtc/rtc-sa1100.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/sa1100.c | 1 | ||||
-rw-r--r-- | drivers/usb/host/ohci-sa1111.c | 297 | ||||
-rw-r--r-- | drivers/video/sa1100fb.c | 493 | ||||
-rw-r--r-- | drivers/video/sa1100fb.h | 76 |
24 files changed, 2491 insertions, 1460 deletions
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index f1a274994bb1..4a6c46dea8a0 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -252,6 +252,15 @@ config EP93XX_DMA help Enable support for the Cirrus Logic EP93xx M2P/M2M DMA controller. +config DMA_SA11X0 + tristate "SA-11x0 DMA support" + depends on ARCH_SA1100 + select DMA_ENGINE + help + Support the DMA engine found on Intel StrongARM SA-1100 and + SA-1110 SoCs. This DMA engine can only be used with on-chip + devices. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 009a222e8283..86b795baba98 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_PL330_DMA) += pl330.o obj-$(CONFIG_PCH_DMA) += pch_dma.o obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o +obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c new file mode 100644 index 000000000000..16a6b48883cf --- /dev/null +++ b/drivers/dma/sa11x0-dma.c @@ -0,0 +1,1109 @@ +/* + * SA11x0 DMAengine support + * + * Copyright (C) 2012 Russell King + * Derived in part from arch/arm/mach-sa1100/dma.c, + * Copyright (C) 2000, 2001 by Nicolas Pitre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/sa11x0-dma.h> +#include <linux/slab.h> +#include <linux/spinlock.h> + +#define NR_PHY_CHAN 6 +#define DMA_ALIGN 3 +#define DMA_MAX_SIZE 0x1fff +#define DMA_CHUNK_SIZE 0x1000 + +#define DMA_DDAR 0x00 +#define DMA_DCSR_S 0x04 +#define DMA_DCSR_C 0x08 +#define DMA_DCSR_R 0x0c +#define DMA_DBSA 0x10 +#define DMA_DBTA 0x14 +#define DMA_DBSB 0x18 +#define DMA_DBTB 0x1c +#define DMA_SIZE 0x20 + +#define DCSR_RUN (1 << 0) +#define DCSR_IE (1 << 1) +#define DCSR_ERROR (1 << 2) +#define DCSR_DONEA (1 << 3) +#define DCSR_STRTA (1 << 4) +#define DCSR_DONEB (1 << 5) +#define DCSR_STRTB (1 << 6) +#define DCSR_BIU (1 << 7) + +#define DDAR_RW (1 << 0) /* 0 = W, 1 = R */ +#define DDAR_E (1 << 1) /* 0 = LE, 1 = BE */ +#define DDAR_BS (1 << 2) /* 0 = BS4, 1 = BS8 */ +#define DDAR_DW (1 << 3) /* 0 = 8b, 1 = 16b */ +#define DDAR_Ser0UDCTr (0x0 << 4) +#define DDAR_Ser0UDCRc (0x1 << 4) +#define DDAR_Ser1SDLCTr (0x2 << 4) +#define DDAR_Ser1SDLCRc (0x3 << 4) +#define DDAR_Ser1UARTTr (0x4 << 4) +#define DDAR_Ser1UARTRc (0x5 << 4) +#define DDAR_Ser2ICPTr (0x6 << 4) +#define DDAR_Ser2ICPRc (0x7 << 4) +#define DDAR_Ser3UARTTr (0x8 << 4) +#define DDAR_Ser3UARTRc (0x9 << 4) +#define DDAR_Ser4MCP0Tr (0xa << 4) +#define DDAR_Ser4MCP0Rc (0xb << 4) +#define DDAR_Ser4MCP1Tr (0xc << 4) +#define DDAR_Ser4MCP1Rc (0xd << 4) +#define DDAR_Ser4SSPTr (0xe << 4) +#define DDAR_Ser4SSPRc (0xf << 4) + +struct sa11x0_dma_sg { + u32 addr; + u32 len; +}; + +struct sa11x0_dma_desc { + struct dma_async_tx_descriptor tx; + u32 ddar; + size_t size; + + /* maybe protected by c->lock */ + struct list_head node; + unsigned sglen; + struct sa11x0_dma_sg sg[0]; +}; + +struct sa11x0_dma_phy; + +struct sa11x0_dma_chan { + struct dma_chan chan; + spinlock_t lock; + dma_cookie_t lc; + + /* protected by c->lock */ + struct sa11x0_dma_phy *phy; + enum dma_status status; + struct list_head desc_submitted; + struct list_head desc_issued; + + /* protected by d->lock */ + struct list_head node; + + u32 ddar; + const char *name; +}; + +struct sa11x0_dma_phy { + void __iomem *base; + struct sa11x0_dma_dev *dev; + unsigned num; + + struct sa11x0_dma_chan *vchan; + + /* Protected by c->lock */ + unsigned sg_load; + struct sa11x0_dma_desc *txd_load; + unsigned sg_done; + struct sa11x0_dma_desc *txd_done; +#ifdef CONFIG_PM_SLEEP + u32 dbs[2]; + u32 dbt[2]; + u32 dcsr; +#endif +}; + +struct sa11x0_dma_dev { + struct dma_device slave; + void __iomem *base; + spinlock_t lock; + struct tasklet_struct task; + struct list_head chan_pending; + struct list_head desc_complete; + struct sa11x0_dma_phy phy[NR_PHY_CHAN]; +}; + +static struct sa11x0_dma_chan *to_sa11x0_dma_chan(struct dma_chan *chan) +{ + return container_of(chan, struct sa11x0_dma_chan, chan); +} + +static struct sa11x0_dma_dev *to_sa11x0_dma(struct dma_device *dmadev) +{ + return container_of(dmadev, struct sa11x0_dma_dev, slave); +} + +static struct sa11x0_dma_desc *to_sa11x0_dma_tx(struct dma_async_tx_descriptor *tx) +{ + return container_of(tx, struct sa11x0_dma_desc, tx); +} + +static struct sa11x0_dma_desc *sa11x0_dma_next_desc(struct sa11x0_dma_chan *c) +{ + if (list_empty(&c->desc_issued)) + return NULL; + + return list_first_entry(&c->desc_issued, struct sa11x0_dma_desc, node); +} + +static void sa11x0_dma_start_desc(struct sa11x0_dma_phy *p, struct sa11x0_dma_desc *txd) +{ + list_del(&txd->node); + p->txd_load = txd; + p->sg_load = 0; + + dev_vdbg(p->dev->slave.dev, "pchan %u: txd %p[%x]: starting: DDAR:%x\n", + p->num, txd, txd->tx.cookie, txd->ddar); +} + +static void noinline sa11x0_dma_start_sg(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_load; + struct sa11x0_dma_sg *sg; + void __iomem *base = p->base; + unsigned dbsx, dbtx; + u32 dcsr; + + if (!txd) + return; + + dcsr = readl_relaxed(base + DMA_DCSR_R); + + /* Don't try to load the next transfer if both buffers are started */ + if ((dcsr & (DCSR_STRTA | DCSR_STRTB)) == (DCSR_STRTA | DCSR_STRTB)) + return; + + if (p->sg_load == txd->sglen) { + struct sa11x0_dma_desc *txn = sa11x0_dma_next_desc(c); + + /* + * We have reached the end of the current descriptor. + * Peek at the next descriptor, and if compatible with + * the current, start processing it. + */ + if (txn && txn->ddar == txd->ddar) { + txd = txn; + sa11x0_dma_start_desc(p, txn); + } else { + p->txd_load = NULL; + return; + } + } + + sg = &txd->sg[p->sg_load++]; + + /* Select buffer to load according to channel status */ + if (((dcsr & (DCSR_BIU | DCSR_STRTB)) == (DCSR_BIU | DCSR_STRTB)) || + ((dcsr & (DCSR_BIU | DCSR_STRTA)) == 0)) { + dbsx = DMA_DBSA; + dbtx = DMA_DBTA; + dcsr = DCSR_STRTA | DCSR_IE | DCSR_RUN; + } else { + dbsx = DMA_DBSB; + dbtx = DMA_DBTB; + dcsr = DCSR_STRTB | DCSR_IE | DCSR_RUN; + } + + writel_relaxed(sg->addr, base + dbsx); + writel_relaxed(sg->len, base + dbtx); + writel(dcsr, base + DMA_DCSR_S); + + dev_dbg(p->dev->slave.dev, "pchan %u: load: DCSR:%02x DBS%c:%08x DBT%c:%08x\n", + p->num, dcsr, + 'A' + (dbsx == DMA_DBSB), sg->addr, + 'A' + (dbtx == DMA_DBTB), sg->len); +} + +static void noinline sa11x0_dma_complete(struct sa11x0_dma_phy *p, + struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = p->txd_done; + + if (++p->sg_done == txd->sglen) { + struct sa11x0_dma_dev *d = p->dev; + + dev_vdbg(d->slave.dev, "pchan %u: txd %p[%x]: completed\n", + p->num, p->txd_done, p->txd_done->tx.cookie); + + c->lc = txd->tx.cookie; + + spin_lock(&d->lock); + list_add_tail(&txd->node, &d->desc_complete); + spin_unlock(&d->lock); + + p->sg_done = 0; + p->txd_done = p->txd_load; + + tasklet_schedule(&d->task); + } + + sa11x0_dma_start_sg(p, c); +} + +static irqreturn_t sa11x0_dma_irq(int irq, void *dev_id) +{ + struct sa11x0_dma_phy *p = dev_id; + struct sa11x0_dma_dev *d = p->dev; + struct sa11x0_dma_chan *c; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (!(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB))) + return IRQ_NONE; + + /* Clear reported status bits */ + writel_relaxed(dcsr & (DCSR_ERROR | DCSR_DONEA | DCSR_DONEB), + p->base + DMA_DCSR_C); + + dev_dbg(d->slave.dev, "pchan %u: irq: DCSR:%02x\n", p->num, dcsr); + + if (dcsr & DCSR_ERROR) { + dev_err(d->slave.dev, "pchan %u: error. DCSR:%02x DDAR:%08x DBSA:%08x DBTA:%08x DBSB:%08x DBTB:%08x\n", + p->num, dcsr, + readl_relaxed(p->base + DMA_DDAR), + readl_relaxed(p->base + DMA_DBSA), + readl_relaxed(p->base + DMA_DBTA), + readl_relaxed(p->base + DMA_DBSB), + readl_relaxed(p->base + DMA_DBTB)); + } + + c = p->vchan; + if (c) { + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + /* + * Now that we're holding the lock, check that the vchan + * really is associated with this pchan before touching the + * hardware. This should always succeed, because we won't + * change p->vchan or c->phy while the channel is actively + * transferring. + */ + if (c->phy == p) { + if (dcsr & DCSR_DONEA) + sa11x0_dma_complete(p, c); + if (dcsr & DCSR_DONEB) + sa11x0_dma_complete(p, c); + } + spin_unlock_irqrestore(&c->lock, flags); + } + + return IRQ_HANDLED; +} + +static void sa11x0_dma_start_txd(struct sa11x0_dma_chan *c) +{ + struct sa11x0_dma_desc *txd = sa11x0_dma_next_desc(c); + + /* If the issued list is empty, we have no further txds to process */ + if (txd) { + struct sa11x0_dma_phy *p = c->phy; + + sa11x0_dma_start_desc(p, txd); + p->txd_done = txd; + p->sg_done = 0; + + /* The channel should not have any transfers started */ + WARN_ON(readl_relaxed(p->base + DMA_DCSR_R) & + (DCSR_STRTA | DCSR_STRTB)); + + /* Clear the run and start bits before changing DDAR */ + writel_relaxed(DCSR_RUN | DCSR_STRTA | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + /* Try to start both buffers */ + sa11x0_dma_start_sg(p, c); + sa11x0_dma_start_sg(p, c); + } +} + +static void sa11x0_dma_tasklet(unsigned long arg) +{ + struct sa11x0_dma_dev *d = (struct sa11x0_dma_dev *)arg; + struct sa11x0_dma_phy *p; + struct sa11x0_dma_chan *c; + struct sa11x0_dma_desc *txd, *txn; + LIST_HEAD(head); + unsigned pch, pch_alloc = 0; + + dev_dbg(d->slave.dev, "tasklet enter\n"); + + /* Get the completed tx descriptors */ + spin_lock_irq(&d->lock); + list_splice_init(&d->desc_complete, &head); + spin_unlock_irq(&d->lock); + + list_for_each_entry(txd, &head, node) { + c = to_sa11x0_dma_chan(txd->tx.chan); + + dev_dbg(d->slave.dev, "vchan %p: txd %p[%x] completed\n", + c, txd, txd->tx.cookie); + + spin_lock_irq(&c->lock); + p = c->phy; + if (p) { + if (!p->txd_done) + sa11x0_dma_start_txd(c); + if (!p->txd_done) { + /* No current txd associated with this channel */ + dev_dbg(d->slave.dev, "pchan %u: free\n", p->num); + + /* Mark this channel free */ + c->phy = NULL; + p->vchan = NULL; + } + } + spin_unlock_irq(&c->lock); + } + + spin_lock_irq(&d->lock); + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + p = &d->phy[pch]; + + if (p->vchan == NULL && !list_empty(&d->chan_pending)) { + c = list_first_entry(&d->chan_pending, + struct sa11x0_dma_chan, node); + list_del_init(&c->node); + + pch_alloc |= 1 << pch; + + /* Mark this channel allocated */ + p->vchan = c; + + dev_dbg(d->slave.dev, "pchan %u: alloc vchan %p\n", pch, c); + } + } + spin_unlock_irq(&d->lock); + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + if (pch_alloc & (1 << pch)) { + p = &d->phy[pch]; + c = p->vchan; + + spin_lock_irq(&c->lock); + c->phy = p; + + sa11x0_dma_start_txd(c); + spin_unlock_irq(&c->lock); + } + } + + /* Now free the completed tx descriptor, and call their callbacks */ + list_for_each_entry_safe(txd, txn, &head, node) { + dma_async_tx_callback callback = txd->tx.callback; + void *callback_param = txd->tx.callback_param; + + dev_dbg(d->slave.dev, "txd %p[%x]: callback and free\n", + txd, txd->tx.cookie); + + kfree(txd); + + if (callback) + callback(callback_param); + } + + dev_dbg(d->slave.dev, "tasklet exit\n"); +} + + +static void sa11x0_dma_desc_free(struct sa11x0_dma_dev *d, struct list_head *head) +{ + struct sa11x0_dma_desc *txd, *txn; + + list_for_each_entry_safe(txd, txn, head, node) { + dev_dbg(d->slave.dev, "txd %p: freeing\n", txd); + kfree(txd); + } +} + +static int sa11x0_dma_alloc_chan_resources(struct dma_chan *chan) +{ + return 0; +} + +static void sa11x0_dma_free_chan_resources(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + LIST_HEAD(head); + + spin_lock_irqsave(&c->lock, flags); + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + spin_unlock_irqrestore(&c->lock, flags); + + sa11x0_dma_desc_free(d, &head); +} + +static dma_addr_t sa11x0_dma_pos(struct sa11x0_dma_phy *p) +{ + unsigned reg; + u32 dcsr; + + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + if ((dcsr & (DCSR_BIU | DCSR_STRTA)) == DCSR_STRTA || + (dcsr & (DCSR_BIU | DCSR_STRTB)) == DCSR_BIU) + reg = DMA_DBSA; + else + reg = DMA_DBSB; + + return readl_relaxed(p->base + reg); +} + +static enum dma_status sa11x0_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *state) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + struct sa11x0_dma_desc *txd; + dma_cookie_t last_used, last_complete; + unsigned long flags; + enum dma_status ret; + size_t bytes = 0; + + last_used = c->chan.cookie; + last_complete = c->lc; + + ret = dma_async_is_complete(cookie, last_complete, last_used); + if (ret == DMA_SUCCESS) { + dma_set_tx_state(state, last_complete, last_used, 0); + return ret; + } + + spin_lock_irqsave(&c->lock, flags); + p = c->phy; + ret = c->status; + if (p) { + dma_addr_t addr = sa11x0_dma_pos(p); + + dev_vdbg(d->slave.dev, "tx_status: addr:%x\n", addr); + + txd = p->txd_done; + if (txd) { + unsigned i; + + for (i = 0; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x\n", + i, txd->sg[i].addr, txd->sg[i].len); + if (addr >= txd->sg[i].addr && + addr < txd->sg[i].addr + txd->sg[i].len) { + unsigned len; + + len = txd->sg[i].len - + (addr - txd->sg[i].addr); + dev_vdbg(d->slave.dev, "tx_status: [%u] +%x\n", + i, len); + bytes += len; + i++; + break; + } + } + for (; i < txd->sglen; i++) { + dev_vdbg(d->slave.dev, "tx_status: [%u] %x+%x ++\n", + i, txd->sg[i].addr, txd->sg[i].len); + bytes += txd->sg[i].len; + } + } + if (txd != p->txd_load && p->txd_load) + bytes += p->txd_load->size; + } + list_for_each_entry(txd, &c->desc_issued, node) { + bytes += txd->size; + } + spin_unlock_irqrestore(&c->lock, flags); + + dma_set_tx_state(state, last_complete, last_used, bytes); + + dev_vdbg(d->slave.dev, "tx_status: bytes 0x%zx\n", bytes); + + return ret; +} + +/* + * Move pending txds to the issued list, and re-init pending list. + * If not already pending, add this channel to the list of pending + * channels and trigger the tasklet to run. + */ +static void sa11x0_dma_issue_pending(struct dma_chan *chan) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &c->desc_issued); + if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + if (!c->phy && list_empty(&c->node)) { + list_add_tail(&c->node, &d->chan_pending); + tasklet_schedule(&d->task); + dev_dbg(d->slave.dev, "vchan %p: issued\n", c); + } + spin_unlock(&d->lock); + } else + dev_dbg(d->slave.dev, "vchan %p: nothing to issue\n", c); + spin_unlock_irqrestore(&c->lock, flags); +} + +static dma_cookie_t sa11x0_dma_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(tx->chan); + struct sa11x0_dma_desc *txd = to_sa11x0_dma_tx(tx); + unsigned long flags; + + spin_lock_irqsave(&c->lock, flags); + c->chan.cookie += 1; + if (c->chan.cookie < 0) + c->chan.cookie = 1; + txd->tx.cookie = c->chan.cookie; + + list_add_tail(&txd->node, &c->desc_submitted); + spin_unlock_irqrestore(&c->lock, flags); + + dev_dbg(tx->chan->device->dev, "vchan %p: txd %p[%x]: submitted\n", + c, txd, txd->tx.cookie); + + return txd->tx.cookie; +} + +static struct dma_async_tx_descriptor *sa11x0_dma_prep_slave_sg( + struct dma_chan *chan, struct scatterlist *sg, unsigned int sglen, + enum dma_transfer_direction dir, unsigned long flags) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_desc *txd; + struct scatterlist *sgent; + unsigned i, j = sglen; + size_t size = 0; + + /* SA11x0 channels can only operate in their native direction */ + if (dir != (c->ddar & DDAR_RW ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV)) { + dev_err(chan->device->dev, "vchan %p: bad DMA direction: DDAR:%08x dir:%u\n", + c, c->ddar, dir); + return NULL; + } + + /* Do not allow zero-sized txds */ + if (sglen == 0) + return NULL; + + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned int len = sg_dma_len(sgent); + + if (len > DMA_MAX_SIZE) + j += DIV_ROUND_UP(len, DMA_MAX_SIZE & ~DMA_ALIGN) - 1; + if (addr & DMA_ALIGN) { + dev_dbg(chan->device->dev, "vchan %p: bad buffer alignment: %08x\n", + c, addr); + return NULL; + } + } + + txd = kzalloc(sizeof(*txd) + j * sizeof(txd->sg[0]), GFP_ATOMIC); + if (!txd) { + dev_dbg(chan->device->dev, "vchan %p: kzalloc failed\n", c); + return NULL; + } + + j = 0; + for_each_sg(sg, sgent, sglen, i) { + dma_addr_t addr = sg_dma_address(sgent); + unsigned len = sg_dma_len(sgent); + + size += len; + + do { + unsigned tlen = len; + + /* + * Check whether the transfer will fit. If not, try + * to split the transfer up such that we end up with + * equal chunks - but make sure that we preserve the + * alignment. This avoids small segments. + */ + if (tlen > DMA_MAX_SIZE) { + unsigned mult = DIV_ROUND_UP(tlen, + DMA_MAX_SIZE & ~DMA_ALIGN); + + tlen = (tlen / mult) & ~DMA_ALIGN; + } + + txd->sg[j].addr = addr; + txd->sg[j].len = tlen; + + addr += tlen; + len -= tlen; + j++; + } while (len); + } + + dma_async_tx_descriptor_init(&txd->tx, &c->chan); + txd->tx.flags = flags; + txd->tx.tx_submit = sa11x0_dma_tx_submit; + txd->ddar = c->ddar; + txd->size = size; + txd->sglen = j; + + dev_dbg(chan->device->dev, "vchan %p: txd %p: size %u nr %u\n", + c, txd, txd->size, txd->sglen); + + return &txd->tx; +} + +static int sa11x0_dma_slave_config(struct sa11x0_dma_chan *c, struct dma_slave_config *cfg) +{ + u32 ddar = c->ddar & ((0xf << 4) | DDAR_RW); + dma_addr_t addr; + enum dma_slave_buswidth width; + u32 maxburst; + + if (ddar & DDAR_RW) { + addr = cfg->src_addr; + width = cfg->src_addr_width; + maxburst = cfg->src_maxburst; + } else { + addr = cfg->dst_addr; + width = cfg->dst_addr_width; + maxburst = cfg->dst_maxburst; + } + + if ((width != DMA_SLAVE_BUSWIDTH_1_BYTE && + width != DMA_SLAVE_BUSWIDTH_2_BYTES) || + (maxburst != 4 && maxburst != 8)) + return -EINVAL; + + if (width == DMA_SLAVE_BUSWIDTH_2_BYTES) + ddar |= DDAR_DW; + if (maxburst == 8) + ddar |= DDAR_BS; + + dev_dbg(c->chan.device->dev, "vchan %p: dma_slave_config addr %x width %u burst %u\n", + c, addr, width, maxburst); + + c->ddar = ddar | (addr & 0xf0000000) | (addr & 0x003ffffc) << 6; + + return 0; +} + +static int sa11x0_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, + unsigned long arg) +{ + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + struct sa11x0_dma_dev *d = to_sa11x0_dma(chan->device); + struct sa11x0_dma_phy *p; + LIST_HEAD(head); + unsigned long flags; + int ret; + + switch (cmd) { + case DMA_SLAVE_CONFIG: + return sa11x0_dma_slave_config(c, (struct dma_slave_config *)arg); + + case DMA_TERMINATE_ALL: + dev_dbg(d->slave.dev, "vchan %p: terminate all\n", c); + /* Clear the tx descriptor lists */ + spin_lock_irqsave(&c->lock, flags); + list_splice_tail_init(&c->desc_submitted, &head); + list_splice_tail_init(&c->desc_issued, &head); + + p = c->phy; + if (p) { + struct sa11x0_dma_desc *txd, *txn; + + dev_dbg(d->slave.dev, "pchan %u: terminating\n", p->num); + /* vchan is assigned to a pchan - stop the channel */ + writel(DCSR_RUN | DCSR_IE | + DCSR_STRTA | DCSR_DONEA | + DCSR_STRTB | DCSR_DONEB, + p->base + DMA_DCSR_C); + + list_for_each_entry_safe(txd, txn, &d->desc_complete, node) + if (txd->tx.chan == &c->chan) + list_move(&txd->node, &head); + + if (p->txd_load) { + if (p->txd_load != p->txd_done) + list_add_tail(&p->txd_load->node, &head); + p->txd_load = NULL; + } + if (p->txd_done) { + list_add_tail(&p->txd_done->node, &head); + p->txd_done = NULL; + } + c->phy = NULL; + spin_lock(&d->lock); + p->vchan = NULL; + spin_unlock(&d->lock); + tasklet_schedule(&d->task); + } + spin_unlock_irqrestore(&c->lock, flags); + sa11x0_dma_desc_free(d, &head); + ret = 0; + break; + + case DMA_PAUSE: + dev_dbg(d->slave.dev, "vchan %p: pause\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_IN_PROGRESS) { + c->status = DMA_PAUSED; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + } else { + spin_lock(&d->lock); + list_del_init(&c->node); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + case DMA_RESUME: + dev_dbg(d->slave.dev, "vchan %p: resume\n", c); + spin_lock_irqsave(&c->lock, flags); + if (c->status == DMA_PAUSED) { + c->status = DMA_IN_PROGRESS; + + p = c->phy; + if (p) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_S); + } else if (!list_empty(&c->desc_issued)) { + spin_lock(&d->lock); + list_add_tail(&c->node, &d->chan_pending); + spin_unlock(&d->lock); + } + } + spin_unlock_irqrestore(&c->lock, flags); + ret = 0; + break; + + default: + ret = -ENXIO; + break; + } + + return ret; +} + +struct sa11x0_dma_channel_desc { + u32 ddar; + const char *name; +}; + +#define CD(d1, d2) { .ddar = DDAR_##d1 | d2, .name = #d1 } +static const struct sa11x0_dma_channel_desc chan_desc[] = { + CD(Ser0UDCTr, 0), + CD(Ser0UDCRc, DDAR_RW), + CD(Ser1SDLCTr, 0), + CD(Ser1SDLCRc, DDAR_RW), + CD(Ser1UARTTr, 0), + CD(Ser1UARTRc, DDAR_RW), + CD(Ser2ICPTr, 0), + CD(Ser2ICPRc, DDAR_RW), + CD(Ser3UARTTr, 0), + CD(Ser3UARTRc, DDAR_RW), + CD(Ser4MCP0Tr, 0), + CD(Ser4MCP0Rc, DDAR_RW), + CD(Ser4MCP1Tr, 0), + CD(Ser4MCP1Rc, DDAR_RW), + CD(Ser4SSPTr, 0), + CD(Ser4SSPRc, DDAR_RW), +}; + +static int __devinit sa11x0_dma_init_dmadev(struct dma_device *dmadev, + struct device *dev) +{ + unsigned i; + + dmadev->chancnt = ARRAY_SIZE(chan_desc); + INIT_LIST_HEAD(&dmadev->channels); + dmadev->dev = dev; + dmadev->device_alloc_chan_resources = sa11x0_dma_alloc_chan_resources; + dmadev->device_free_chan_resources = sa11x0_dma_free_chan_resources; + dmadev->device_control = sa11x0_dma_control; + dmadev->device_tx_status = sa11x0_dma_tx_status; + dmadev->device_issue_pending = sa11x0_dma_issue_pending; + + for (i = 0; i < dmadev->chancnt; i++) { + struct sa11x0_dma_chan *c; + + c = kzalloc(sizeof(*c), GFP_KERNEL); + if (!c) { + dev_err(dev, "no memory for channel %u\n", i); + return -ENOMEM; + } + + c->chan.device = dmadev; + c->status = DMA_IN_PROGRESS; + c->ddar = chan_desc[i].ddar; + c->name = chan_desc[i].name; + spin_lock_init(&c->lock); + INIT_LIST_HEAD(&c->desc_submitted); + INIT_LIST_HEAD(&c->desc_issued); + INIT_LIST_HEAD(&c->node); + list_add_tail(&c->chan.device_node, &dmadev->channels); + } + + return dma_async_device_register(dmadev); +} + +static int sa11x0_dma_request_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + + if (irq <= 0) + return -ENXIO; + + return request_irq(irq, sa11x0_dma_irq, 0, dev_name(&pdev->dev), data); +} + +static void sa11x0_dma_free_irq(struct platform_device *pdev, int nr, + void *data) +{ + int irq = platform_get_irq(pdev, nr); + if (irq > 0) + free_irq(irq, data); +} + +static void sa11x0_dma_free_channels(struct dma_device *dmadev) +{ + struct sa11x0_dma_chan *c, *cn; + + list_for_each_entry_safe(c, cn, &dmadev->channels, chan.device_node) { + list_del(&c->chan.device_node); + kfree(c); + } +} + +static int __devinit sa11x0_dma_probe(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d; + struct resource *res; + unsigned i; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + d = kzalloc(sizeof(*d), GFP_KERNEL); + if (!d) { + ret = -ENOMEM; + goto err_alloc; + } + + spin_lock_init(&d->lock); + INIT_LIST_HEAD(&d->chan_pending); + INIT_LIST_HEAD(&d->desc_complete); + + d->base = ioremap(res->start, resource_size(res)); + if (!d->base) { + ret = -ENOMEM; + goto err_ioremap; + } + + tasklet_init(&d->task, sa11x0_dma_tasklet, (unsigned long)d); + + for (i = 0; i < NR_PHY_CHAN; i++) { + struct sa11x0_dma_phy *p = &d->phy[i]; + + p->dev = d; + p->num = i; + p->base = d->base + i * DMA_SIZE; + writel_relaxed(DCSR_RUN | DCSR_IE | DCSR_ERROR | + DCSR_DONEA | DCSR_STRTA | DCSR_DONEB | DCSR_STRTB, + p->base + DMA_DCSR_C); + writel_relaxed(0, p->base + DMA_DDAR); + + ret = sa11x0_dma_request_irq(pdev, i, p); + if (ret) { + while (i) { + i--; + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + } + goto err_irq; + } + } + + dma_cap_set(DMA_SLAVE, d->slave.cap_mask); + d->slave.device_prep_slave_sg = sa11x0_dma_prep_slave_sg; + ret = sa11x0_dma_init_dmadev(&d->slave, &pdev->dev); + if (ret) { + dev_warn(d->slave.dev, "failed to register slave async device: %d\n", + ret); + goto err_slave_reg; + } + + platform_set_drvdata(pdev, d); + return 0; + + err_slave_reg: + sa11x0_dma_free_channels(&d->slave); + for (i = 0; i < NR_PHY_CHAN; i++) + sa11x0_dma_free_irq(pdev, i, &d->phy[i]); + err_irq: + tasklet_kill(&d->task); + iounmap(d->base); + err_ioremap: + kfree(d); + err_alloc: + return ret; +} + +static int __devexit sa11x0_dma_remove(struct platform_device *pdev) +{ + struct sa11x0_dma_dev *d = platform_get_drvdata(pdev); + unsigned pch; + + dma_async_device_unregister(&d->slave); + + sa11x0_dma_free_channels(&d->slave); + for (pch = 0; pch < NR_PHY_CHAN; pch++) + sa11x0_dma_free_irq(pdev, pch, &d->phy[pch]); + tasklet_kill(&d->task); + iounmap(d->base); + kfree(d); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sa11x0_dma_suspend(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + u32 dcsr, saved_dcsr; + + dcsr = saved_dcsr = readl_relaxed(p->base + DMA_DCSR_R); + if (dcsr & DCSR_RUN) { + writel(DCSR_RUN | DCSR_IE, p->base + DMA_DCSR_C); + dcsr = readl_relaxed(p->base + DMA_DCSR_R); + } + + saved_dcsr &= DCSR_RUN | DCSR_IE; + if (dcsr & DCSR_BIU) { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTB); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTA); + saved_dcsr |= (dcsr & DCSR_STRTA ? DCSR_STRTB : 0) | + (dcsr & DCSR_STRTB ? DCSR_STRTA : 0); + } else { + p->dbs[0] = readl_relaxed(p->base + DMA_DBSA); + p->dbt[0] = readl_relaxed(p->base + DMA_DBTA); + p->dbs[1] = readl_relaxed(p->base + DMA_DBSB); + p->dbt[1] = readl_relaxed(p->base + DMA_DBTB); + saved_dcsr |= dcsr & (DCSR_STRTA | DCSR_STRTB); + } + p->dcsr = saved_dcsr; + + writel(DCSR_STRTA | DCSR_STRTB, p->base + DMA_DCSR_C); + } + + return 0; +} + +static int sa11x0_dma_resume(struct device *dev) +{ + struct sa11x0_dma_dev *d = dev_get_drvdata(dev); + unsigned pch; + + for (pch = 0; pch < NR_PHY_CHAN; pch++) { + struct sa11x0_dma_phy *p = &d->phy[pch]; + struct sa11x0_dma_desc *txd = NULL; + u32 dcsr = readl_relaxed(p->base + DMA_DCSR_R); + + WARN_ON(dcsr & (DCSR_BIU | DCSR_STRTA | DCSR_STRTB | DCSR_RUN)); + + if (p->txd_done) + txd = p->txd_done; + else if (p->txd_load) + txd = p->txd_load; + + if (!txd) + continue; + + writel_relaxed(txd->ddar, p->base + DMA_DDAR); + + writel_relaxed(p->dbs[0], p->base + DMA_DBSA); + writel_relaxed(p->dbt[0], p->base + DMA_DBTA); + writel_relaxed(p->dbs[1], p->base + DMA_DBSB); + writel_relaxed(p->dbt[1], p->base + DMA_DBTB); + writel_relaxed(p->dcsr, p->base + DMA_DCSR_S); + } + + return 0; +} +#endif + +static const struct dev_pm_ops sa11x0_dma_pm_ops = { + .suspend_noirq = sa11x0_dma_suspend, + .resume_noirq = sa11x0_dma_resume, + .freeze_noirq = sa11x0_dma_suspend, + .thaw_noirq = sa11x0_dma_resume, + .poweroff_noirq = sa11x0_dma_suspend, + .restore_noirq = sa11x0_dma_resume, +}; + +static struct platform_driver sa11x0_dma_driver = { + .driver = { + .name = "sa11x0-dma", + .owner = THIS_MODULE, + .pm = &sa11x0_dma_pm_ops, + }, + .probe = sa11x0_dma_probe, + .remove = __devexit_p(sa11x0_dma_remove), +}; + +bool sa11x0_dma_filter_fn(struct dma_chan *chan, void *param) +{ + if (chan->device->dev->driver == &sa11x0_dma_driver.driver) { + struct sa11x0_dma_chan *c = to_sa11x0_dma_chan(chan); + const char *p = param; + + return !strcmp(c->name, p); + } + return false; +} +EXPORT_SYMBOL(sa11x0_dma_filter_fn); + +static int __init sa11x0_dma_init(void) +{ + return platform_driver_register(&sa11x0_dma_driver); +} +subsys_initcall(sa11x0_dma_init); + +static void __exit sa11x0_dma_exit(void) +{ + platform_driver_unregister(&sa11x0_dma_driver); +} +module_exit(sa11x0_dma_exit); + +MODULE_AUTHOR("Russell King"); +MODULE_DESCRIPTION("SA-11x0 DMA driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:sa11x0-dma"); diff --git a/drivers/gpio/gpio-sa1100.c b/drivers/gpio/gpio-sa1100.c index 7eecf69362ee..8ea3b33d4b40 100644 --- a/drivers/gpio/gpio-sa1100.c +++ b/drivers/gpio/gpio-sa1100.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <mach/hardware.h> +#include <mach/irqs.h> static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset) { diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c index eeafc30b207b..9d639fa1afbd 100644 --- a/drivers/input/keyboard/jornada720_kbd.c +++ b/drivers/input/keyboard/jornada720_kbd.c @@ -27,6 +27,7 @@ #include <mach/jornada720.h> #include <mach/hardware.h> +#include <mach/irqs.h> MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver"); diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c index 44fc8b4bcd81..5ebabe3fc845 100644 --- a/drivers/input/serio/sa1111ps2.c +++ b/drivers/input/serio/sa1111ps2.c @@ -24,6 +24,26 @@ #include <asm/hardware/sa1111.h> +#define PS2CR 0x0000 +#define PS2STAT 0x0004 +#define PS2DATA 0x0008 +#define PS2CLKDIV 0x000c +#define PS2PRECNT 0x0010 + +#define PS2CR_ENA 0x08 +#define PS2CR_FKD 0x02 +#define PS2CR_FKC 0x01 + +#define PS2STAT_STP 0x0100 +#define PS2STAT_TXE 0x0080 +#define PS2STAT_TXB 0x0040 +#define PS2STAT_RXF 0x0020 +#define PS2STAT_RXB 0x0010 +#define PS2STAT_ENA 0x0008 +#define PS2STAT_RXP 0x0004 +#define PS2STAT_KBD 0x0002 +#define PS2STAT_KBC 0x0001 + struct ps2if { struct serio *io; struct sa1111_dev *dev; @@ -45,22 +65,22 @@ static irqreturn_t ps2_rxint(int irq, void *dev_id) struct ps2if *ps2if = dev_id; unsigned int scancode, flag, status; - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); while (status & PS2STAT_RXF) { if (status & PS2STAT_STP) - sa1111_writel(PS2STAT_STP, ps2if->base + SA1111_PS2STAT); + sa1111_writel(PS2STAT_STP, ps2if->base + PS2STAT); flag = (status & PS2STAT_STP ? SERIO_FRAME : 0) | (status & PS2STAT_RXP ? 0 : SERIO_PARITY); - scancode = sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff; + scancode = sa1111_readl(ps2if->base + PS2DATA) & 0xff; if (hweight8(scancode) & 1) flag ^= SERIO_PARITY; serio_interrupt(ps2if->io, scancode, flag); - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); } return IRQ_HANDLED; @@ -75,12 +95,12 @@ static irqreturn_t ps2_txint(int irq, void *dev_id) unsigned int status; spin_lock(&ps2if->lock); - status = sa1111_readl(ps2if->base + SA1111_PS2STAT); + status = sa1111_readl(ps2if->base + PS2STAT); if (ps2if->head == ps2if->tail) { disable_irq_nosync(irq); /* done */ } else if (status & PS2STAT_TXE) { - sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA); + sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + PS2DATA); ps2if->tail = (ps2if->tail + 1) & (sizeof(ps2if->buf) - 1); } spin_unlock(&ps2if->lock); @@ -103,8 +123,8 @@ static int ps2_write(struct serio *io, unsigned char val) /* * If the TX register is empty, we can go straight out. */ - if (sa1111_readl(ps2if->base + SA1111_PS2STAT) & PS2STAT_TXE) { - sa1111_writel(val, ps2if->base + SA1111_PS2DATA); + if (sa1111_readl(ps2if->base + PS2STAT) & PS2STAT_TXE) { + sa1111_writel(val, ps2if->base + PS2DATA); } else { if (ps2if->head == ps2if->tail) enable_irq(ps2if->dev->irq[1]); @@ -124,13 +144,16 @@ static int ps2_open(struct serio *io) struct ps2if *ps2if = io->port_data; int ret; - sa1111_enable_device(ps2if->dev); + ret = sa1111_enable_device(ps2if->dev); + if (ret) + return ret; ret = request_irq(ps2if->dev->irq[0], ps2_rxint, 0, SA1111_DRIVER_NAME(ps2if->dev), ps2if); if (ret) { printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", ps2if->dev->irq[0], ret); + sa1111_disable_device(ps2if->dev); return ret; } @@ -140,6 +163,7 @@ static int ps2_open(struct serio *io) printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n", ps2if->dev->irq[1], ret); free_irq(ps2if->dev->irq[0], ps2if); + sa1111_disable_device(ps2if->dev); return ret; } @@ -147,7 +171,7 @@ static int ps2_open(struct serio *io) enable_irq_wake(ps2if->dev->irq[0]); - sa1111_writel(PS2CR_ENA, ps2if->base + SA1111_PS2CR); + sa1111_writel(PS2CR_ENA, ps2if->base + PS2CR); return 0; } @@ -155,7 +179,7 @@ static void ps2_close(struct serio *io) { struct ps2if *ps2if = io->port_data; - sa1111_writel(0, ps2if->base + SA1111_PS2CR); + sa1111_writel(0, ps2if->base + PS2CR); disable_irq_wake(ps2if->dev->irq[0]); @@ -175,7 +199,7 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if) int maxread = 100; while (maxread--) { - if ((sa1111_readl(ps2if->base + SA1111_PS2DATA) & 0xff) == 0xff) + if ((sa1111_readl(ps2if->base + PS2DATA) & 0xff) == 0xff) break; } } @@ -185,11 +209,11 @@ static unsigned int __devinit ps2_test_one(struct ps2if *ps2if, { unsigned int val; - sa1111_writel(PS2CR_ENA | mask, ps2if->base + SA1111_PS2CR); + sa1111_writel(PS2CR_ENA | mask, ps2if->base + PS2CR); udelay(2); - val = sa1111_readl(ps2if->base + SA1111_PS2STAT); + val = sa1111_readl(ps2if->base + PS2STAT); return val & (PS2STAT_KBC | PS2STAT_KBD); } @@ -220,7 +244,7 @@ static int __devinit ps2_test(struct ps2if *ps2if) ret = -ENODEV; } - sa1111_writel(0, ps2if->base + SA1111_PS2CR); + sa1111_writel(0, ps2if->base + PS2CR); return ret; } @@ -274,8 +298,8 @@ static int __devinit ps2_probe(struct sa1111_dev *dev) sa1111_enable_device(ps2if->dev); /* Incoming clock is 8MHz */ - sa1111_writel(0, ps2if->base + SA1111_PS2CLKDIV); - sa1111_writel(127, ps2if->base + SA1111_PS2PRECNT); + sa1111_writel(0, ps2if->base + PS2CLKDIV); + sa1111_writel(127, ps2if->base + PS2PRECNT); /* * Flush any pending input. @@ -330,6 +354,7 @@ static int __devexit ps2_remove(struct sa1111_dev *dev) static struct sa1111_driver ps2_driver = { .drv = { .name = "sa1111-ps2", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_PS2, .probe = ps2_probe, diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c index c3848ad2325b..d9be6eac99b1 100644 --- a/drivers/input/touchscreen/jornada720_ts.c +++ b/drivers/input/touchscreen/jornada720_ts.c @@ -22,6 +22,7 @@ #include <mach/hardware.h> #include <mach/jornada720.h> +#include <mach/irqs.h> MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>"); MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver"); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index cd13e9f2f5e6..28a301b28579 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -847,8 +847,9 @@ config MCP_SA11X0 # Chip drivers config MCP_UCB1200 - tristate "Support for UCB1200 / UCB1300" - depends on MCP + bool "Support for UCB1200 / UCB1300" + depends on MCP_SA11X0 + select MCP config MCP_UCB1200_TS tristate "Touchscreen interface support" diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 86cc3f7841cd..6acf2e03f2ba 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -19,7 +19,6 @@ #include <linux/string.h> #include <linux/mfd/mcp.h> -#include <mach/dma.h> #include <asm/system.h> @@ -48,39 +47,11 @@ static int mcp_bus_remove(struct device *dev) return 0; } -static int mcp_bus_suspend(struct device *dev, pm_message_t state) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->suspend(mcp, state); - } - return ret; -} - -static int mcp_bus_resume(struct device *dev) -{ - struct mcp *mcp = to_mcp(dev); - int ret = 0; - - if (dev->driver) { - struct mcp_driver *drv = to_mcp_driver(dev->driver); - - ret = drv->resume(mcp); - } - return ret; -} - static struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, .probe = mcp_bus_probe, .remove = mcp_bus_remove, - .suspend = mcp_bus_suspend, - .resume = mcp_bus_resume, }; /** @@ -208,6 +179,7 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) mcp = kzalloc(sizeof(struct mcp) + size, GFP_KERNEL); if (mcp) { spin_lock_init(&mcp->lock); + device_initialize(&mcp->attached_device); mcp->attached_device.parent = parent; mcp->attached_device.bus = &mcp_bus_type; mcp->attached_device.dma_mask = parent->dma_mask; @@ -217,18 +189,25 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_register(struct mcp *mcp) +int mcp_host_add(struct mcp *mcp, void *pdata) { + mcp->attached_device.platform_data = pdata; dev_set_name(&mcp->attached_device, "mcp0"); - return device_register(&mcp->attached_device); + return device_add(&mcp->attached_device); +} +EXPORT_SYMBOL(mcp_host_add); + +void mcp_host_del(struct mcp *mcp) +{ + device_del(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_register); +EXPORT_SYMBOL(mcp_host_del); -void mcp_host_unregister(struct mcp *mcp) +void mcp_host_free(struct mcp *mcp) { - device_unregister(&mcp->attached_device); + put_device(&mcp->attached_device); } -EXPORT_SYMBOL(mcp_host_unregister); +EXPORT_SYMBOL(mcp_host_free); int mcp_driver_register(struct mcp_driver *mcpdrv) { diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 02c53a0766c4..1c0ceacaa1f6 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -13,51 +13,61 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/errno.h> #include <linux/kernel.h> #include <linux/delay.h> #include <linux/spinlock.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/mfd/mcp.h> -#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/system.h> #include <mach/mcp.h> -#include <mach/assabet.h> - +#define DRIVER_NAME "sa11x0-mcp" struct mcp_sa11x0 { - u32 mccr0; - u32 mccr1; + void __iomem *base0; + void __iomem *base1; + u32 mccr0; + u32 mccr1; }; +/* Register offsets */ +#define MCCR0(m) ((m)->base0 + 0x00) +#define MCDR0(m) ((m)->base0 + 0x08) +#define MCDR1(m) ((m)->base0 + 0x0c) +#define MCDR2(m) ((m)->base0 + 0x10) +#define MCSR(m) ((m)->base0 + 0x18) +#define MCCR1(m) ((m)->base1 + 0x00) + #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) static void mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) { - unsigned int mccr0; + struct mcp_sa11x0 *m = priv(mcp); divisor /= 32; - mccr0 = Ser4MCCR0 & ~0x00007f00; - mccr0 |= divisor << 8; - Ser4MCCR0 = mccr0; + m->mccr0 &= ~0x00007f00; + m->mccr0 |= divisor << 8; + writel_relaxed(m->mccr0, MCCR0(m)); } static void mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) { - unsigned int mccr0; + struct mcp_sa11x0 *m = priv(mcp); divisor /= 32; - mccr0 = Ser4MCCR0 & ~0x0000007f; - mccr0 |= divisor; - Ser4MCCR0 = mccr0; + m->mccr0 &= ~0x0000007f; + m->mccr0 |= divisor; + writel_relaxed(m->mccr0, MCCR0(m)); } /* @@ -69,14 +79,15 @@ mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) static void mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) { + struct mcp_sa11x0 *m = priv(mcp); int ret = -ETIME; int i; - Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); + writel_relaxed(reg << 17 | MCDR2_Wr | (val & 0xffff), MCDR2(m)); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - if (Ser4MCSR & MCSR_CWC) { + if (readl_relaxed(MCSR(m)) & MCSR_CWC) { ret = 0; break; } @@ -95,15 +106,16 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) static unsigned int mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) { + struct mcp_sa11x0 *m = priv(mcp); int ret = -ETIME; int i; - Ser4MCDR2 = reg << 17 | MCDR2_Rd; + writel_relaxed(reg << 17 | MCDR2_Rd, MCDR2(m)); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - if (Ser4MCSR & MCSR_CRC) { - ret = Ser4MCDR2 & 0xffff; + if (readl_relaxed(MCSR(m)) & MCSR_CRC) { + ret = readl_relaxed(MCDR2(m)) & 0xffff; break; } } @@ -116,13 +128,19 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) static void mcp_sa11x0_enable(struct mcp *mcp) { - Ser4MCSR = -1; - Ser4MCCR0 |= MCCR0_MCE; + struct mcp_sa11x0 *m = priv(mcp); + + writel(-1, MCSR(m)); + m->mccr0 |= MCCR0_MCE; + writel_relaxed(m->mccr0, MCCR0(m)); } static void mcp_sa11x0_disable(struct mcp *mcp) { - Ser4MCCR0 &= ~MCCR0_MCE; + struct mcp_sa11x0 *m = priv(mcp); + + m->mccr0 &= ~MCCR0_MCE; + writel_relaxed(m->mccr0, MCCR0(m)); } /* @@ -137,55 +155,64 @@ static struct mcp_ops mcp_sa11x0 = { .disable = mcp_sa11x0_disable, }; -static int mcp_sa11x0_probe(struct platform_device *pdev) +static int mcp_sa11x0_probe(struct platform_device *dev) { - struct mcp_plat_data *data = pdev->dev.platform_data; + struct mcp_plat_data *data = dev->dev.platform_data; + struct resource *mem0, *mem1; + struct mcp_sa11x0 *m; struct mcp *mcp; int ret; if (!data) return -ENODEV; - if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) - return -EBUSY; + mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0); + mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1); + if (!mem0 || !mem1) + return -ENXIO; + + if (!request_mem_region(mem0->start, resource_size(mem0), + DRIVER_NAME)) { + ret = -EBUSY; + goto err_mem0; + } - mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); + if (!request_mem_region(mem1->start, resource_size(mem1), + DRIVER_NAME)) { + ret = -EBUSY; + goto err_mem1; + } + + mcp = mcp_host_alloc(&dev->dev, sizeof(struct mcp_sa11x0)); if (!mcp) { ret = -ENOMEM; - goto release; + goto err_alloc; } mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->dma_audio_rd = DMA_Ser4MCP0Rd; - mcp->dma_audio_wr = DMA_Ser4MCP0Wr; - mcp->dma_telco_rd = DMA_Ser4MCP1Rd; - mcp->dma_telco_wr = DMA_Ser4MCP1Wr; - mcp->gpio_base = data->gpio_base; - platform_set_drvdata(pdev, mcp); + m = priv(mcp); + m->mccr0 = data->mccr0 | 0x7f7f; + m->mccr1 = data->mccr1; - if (machine_is_assabet()) { - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + m->base0 = ioremap(mem0->start, resource_size(mem0)); + m->base1 = ioremap(mem1->start, resource_size(mem1)); + if (!m->base0 || !m->base1) { + ret = -ENOMEM; + goto err_ioremap; } - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + platform_set_drvdata(dev, mcp); /* * Initialise device. Note that we initially * set the sampling rate to minimum. */ - Ser4MCSR = -1; - Ser4MCCR1 = data->mccr1; - Ser4MCCR0 = data->mccr0 | 0x7f7f; + writel_relaxed(-1, MCSR(m)); + writel_relaxed(m->mccr1, MCCR1(m)); + writel_relaxed(m->mccr0, MCCR0(m)); /* * Calculate the read/write timeout (us) from the bit clock @@ -195,62 +222,90 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_register(mcp); + ret = mcp_host_add(mcp, data->codec_pdata); if (ret == 0) - goto out; + return 0; - release: - release_mem_region(0x80060000, 0x60); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(dev, NULL); - out: + err_ioremap: + iounmap(m->base1); + iounmap(m->base0); + mcp_host_free(mcp); + err_alloc: + release_mem_region(mem1->start, resource_size(mem1)); + err_mem1: + release_mem_region(mem0->start, resource_size(mem0)); + err_mem0: return ret; } static int mcp_sa11x0_remove(struct platform_device *dev) { struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(mcp); + struct resource *mem0, *mem1; + + if (m->mccr0 & MCCR0_MCE) + dev_warn(&dev->dev, + "device left active (missing disable call?)\n"); + + mem0 = platform_get_resource(dev, IORESOURCE_MEM, 0); + mem1 = platform_get_resource(dev, IORESOURCE_MEM, 1); platform_set_drvdata(dev, NULL); - mcp_host_unregister(mcp); - release_mem_region(0x80060000, 0x60); + mcp_host_del(mcp); + iounmap(m->base1); + iounmap(m->base0); + mcp_host_free(mcp); + release_mem_region(mem1->start, resource_size(mem1)); + release_mem_region(mem0->start, resource_size(mem0)); return 0; } -static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int mcp_sa11x0_suspend(struct device *dev) { - struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev)); + + if (m->mccr0 & MCCR0_MCE) + dev_warn(dev, "device left active (missing disable call?)\n"); - priv(mcp)->mccr0 = Ser4MCCR0; - priv(mcp)->mccr1 = Ser4MCCR1; - Ser4MCCR0 &= ~MCCR0_MCE; + writel(m->mccr0 & ~MCCR0_MCE, MCCR0(m)); return 0; } -static int mcp_sa11x0_resume(struct platform_device *dev) +static int mcp_sa11x0_resume(struct device *dev) { - struct mcp *mcp = platform_get_drvdata(dev); + struct mcp_sa11x0 *m = priv(dev_get_drvdata(dev)); - Ser4MCCR1 = priv(mcp)->mccr1; - Ser4MCCR0 = priv(mcp)->mccr0; + writel_relaxed(m->mccr1, MCCR1(m)); + writel_relaxed(m->mccr0, MCCR0(m)); return 0; } - -/* - * The driver for the SA11x0 MCP port. - */ -MODULE_ALIAS("platform:sa11x0-mcp"); +#endif + +static const struct dev_pm_ops mcp_sa11x0_pm_ops = { +#ifdef CONFIG_PM_SLEEP + .suspend = mcp_sa11x0_suspend, + .freeze = mcp_sa11x0_suspend, + .poweroff = mcp_sa11x0_suspend, + .resume_noirq = mcp_sa11x0_resume, + .thaw_noirq = mcp_sa11x0_resume, + .restore_noirq = mcp_sa11x0_resume, +#endif +}; static struct platform_driver mcp_sa11x0_driver = { .probe = mcp_sa11x0_probe, .remove = mcp_sa11x0_remove, - .suspend = mcp_sa11x0_suspend, - .resume = mcp_sa11x0_resume, .driver = { - .name = "sa11x0-mcp", + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .pm = &mcp_sa11x0_pm_ops, }, }; @@ -259,6 +314,7 @@ static struct platform_driver mcp_sa11x0_driver = { */ module_platform_driver(mcp_sa11x0_driver); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("SA11x0 multimedia communications port driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ucb1x00-assabet.c b/drivers/mfd/ucb1x00-assabet.c index cea9da60850d..b63c0756a669 100644 --- a/drivers/mfd/ucb1x00-assabet.c +++ b/drivers/mfd/ucb1x00-assabet.c @@ -11,14 +11,15 @@ */ #include <linux/module.h> #include <linux/init.h> +#include <linux/device.h> +#include <linux/err.h> #include <linux/fs.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/platform_device.h> #include <linux/proc_fs.h> -#include <linux/device.h> #include <linux/mfd/ucb1x00.h> -#include <mach/dma.h> - - #define UCB1X00_ATTR(name,input)\ static ssize_t name##_show(struct device *dev, struct device_attribute *attr, \ char *buf) \ @@ -38,14 +39,45 @@ UCB1X00_ATTR(batt_temp, UCB_ADC_INP_AD2); static int ucb1x00_assabet_add(struct ucb1x00_dev *dev) { - device_create_file(&dev->ucb->dev, &dev_attr_vbatt); - device_create_file(&dev->ucb->dev, &dev_attr_vcharger); - device_create_file(&dev->ucb->dev, &dev_attr_batt_temp); + struct ucb1x00 *ucb = dev->ucb; + struct platform_device *pdev; + struct gpio_keys_platform_data keys; + static struct gpio_keys_button buttons[6]; + unsigned i; + + memset(buttons, 0, sizeof(buttons)); + memset(&keys, 0, sizeof(keys)); + + for (i = 0; i < ARRAY_SIZE(buttons); i++) { + buttons[i].code = BTN_0 + i; + buttons[i].gpio = ucb->gpio.base + i; + buttons[i].type = EV_KEY; + buttons[i].can_disable = true; + } + + keys.buttons = buttons; + keys.nbuttons = ARRAY_SIZE(buttons); + keys.poll_interval = 50; + keys.name = "ucb1x00"; + + pdev = platform_device_register_data(&ucb->dev, "gpio-keys", -1, + &keys, sizeof(keys)); + + device_create_file(&ucb->dev, &dev_attr_vbatt); + device_create_file(&ucb->dev, &dev_attr_vcharger); + device_create_file(&ucb->dev, &dev_attr_batt_temp); + + dev->priv = pdev; return 0; } static void ucb1x00_assabet_remove(struct ucb1x00_dev *dev) { + struct platform_device *pdev = dev->priv; + + if (!IS_ERR(pdev)) + platform_device_unregister(pdev); + device_remove_file(&dev->ucb->dev, &dev_attr_batt_temp); device_remove_file(&dev->ucb->dev, &dev_attr_vcharger); device_remove_file(&dev->ucb->dev, &dev_attr_vbatt); diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index febc90cdef7e..70f02daeb22a 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -23,14 +23,12 @@ #include <linux/init.h> #include <linux/errno.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/device.h> #include <linux/mutex.h> #include <linux/mfd/ucb1x00.h> +#include <linux/pm.h> #include <linux/gpio.h> -#include <linux/semaphore.h> - -#include <mach/dma.h> -#include <mach/hardware.h> static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); @@ -102,7 +100,7 @@ void ucb1x00_io_write(struct ucb1x00 *ucb, unsigned int set, unsigned int clear) * ucb1x00_enable must have been called to enable the comms * before using this function. * - * This function does not take any semaphores or spinlocks. + * This function does not take any mutexes or spinlocks. */ unsigned int ucb1x00_io_read(struct ucb1x00 *ucb) { @@ -120,14 +118,22 @@ static void ucb1x00_gpio_set(struct gpio_chip *chip, unsigned offset, int value) else ucb->io_out &= ~(1 << offset); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); } static int ucb1x00_gpio_get(struct gpio_chip *chip, unsigned offset) { struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); - return ucb1x00_reg_read(ucb, UCB_IO_DATA) & (1 << offset); + unsigned val; + + ucb1x00_enable(ucb); + val = ucb1x00_reg_read(ucb, UCB_IO_DATA); + ucb1x00_disable(ucb); + + return val & (1 << offset); } static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) @@ -137,7 +143,9 @@ static int ucb1x00_gpio_direction_input(struct gpio_chip *chip, unsigned offset) spin_lock_irqsave(&ucb->io_lock, flags); ucb->io_dir &= ~(1 << offset); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; @@ -157,6 +165,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset else ucb->io_out &= ~mask; + ucb1x00_enable(ucb); if (old != ucb->io_out) ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); @@ -164,11 +173,19 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset ucb->io_dir |= mask; ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); } + ucb1x00_disable(ucb); spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; } +static int ucb1x00_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); + + return ucb->irq_base > 0 ? ucb->irq_base + offset : -ENXIO; +} + /* * UCB1300 data sheet says we must: * 1. enable ADC => 5us (including reference startup time) @@ -186,7 +203,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset * Any code wishing to use the ADC converter must call this * function prior to using it. * - * This function takes the ADC semaphore to prevent two or more + * This function takes the ADC mutex to prevent two or more * concurrent uses, and therefore may sleep. As a result, it * can only be called from process context, not interrupt * context. @@ -196,7 +213,7 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset */ void ucb1x00_adc_enable(struct ucb1x00 *ucb) { - down(&ucb->adc_sem); + mutex_lock(&ucb->adc_mutex); ucb->adc_cr |= UCB_ADC_ENA; @@ -218,7 +235,7 @@ void ucb1x00_adc_enable(struct ucb1x00 *ucb) * complete (2 frames max without sync). * * If called for a synchronised ADC conversion, it may sleep - * with the ADC semaphore held. + * with the ADC mutex held. */ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) { @@ -246,7 +263,7 @@ unsigned int ucb1x00_adc_read(struct ucb1x00 *ucb, int adc_channel, int sync) * ucb1x00_adc_disable - disable the ADC converter * @ucb: UCB1x00 structure describing chip * - * Disable the ADC converter and release the ADC semaphore. + * Disable the ADC converter and release the ADC mutex. */ void ucb1x00_adc_disable(struct ucb1x00 *ucb) { @@ -254,7 +271,7 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) ucb1x00_reg_write(ucb, UCB_ADC_CR, ucb->adc_cr); ucb1x00_disable(ucb); - up(&ucb->adc_sem); + mutex_unlock(&ucb->adc_mutex); } /* @@ -265,10 +282,9 @@ void ucb1x00_adc_disable(struct ucb1x00 *ucb) * SIBCLK to talk to the chip. We leave the clock running until * we have finished processing all interrupts from the chip. */ -static irqreturn_t ucb1x00_irq(int irqnr, void *devid) +static void ucb1x00_irq(unsigned int irq, struct irq_desc *desc) { - struct ucb1x00 *ucb = devid; - struct ucb1x00_irq *irq; + struct ucb1x00 *ucb = irq_desc_get_handler_data(desc); unsigned int isr, i; ucb1x00_enable(ucb); @@ -276,157 +292,104 @@ static irqreturn_t ucb1x00_irq(int irqnr, void *devid) ucb1x00_reg_write(ucb, UCB_IE_CLEAR, isr); ucb1x00_reg_write(ucb, UCB_IE_CLEAR, 0); - for (i = 0, irq = ucb->irq_handler; i < 16 && isr; i++, isr >>= 1, irq++) - if (isr & 1 && irq->fn) - irq->fn(i, irq->devid); + for (i = 0; i < 16 && isr; i++, isr >>= 1, irq++) + if (isr & 1) + generic_handle_irq(ucb->irq_base + i); ucb1x00_disable(ucb); - - return IRQ_HANDLED; } -/** - * ucb1x00_hook_irq - hook a UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @fn: function to call when interrupt is triggered - * @devid: device id to pass to interrupt handler - * - * Hook the specified interrupt. You can only register one handler - * for each interrupt source. The interrupt source is not enabled - * by this function; use ucb1x00_enable_irq instead. - * - * Interrupt handlers will be called with other interrupts enabled. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -EBUSY if the interrupt has already been hooked - */ -int ucb1x00_hook_irq(struct ucb1x00 *ucb, unsigned int idx, void (*fn)(int, void *), void *devid) +static void ucb1x00_irq_update(struct ucb1x00 *ucb, unsigned mask) { - struct ucb1x00_irq *irq; - int ret = -EINVAL; - - if (idx < 16) { - irq = ucb->irq_handler + idx; - ret = -EBUSY; - - spin_lock_irq(&ucb->lock); - if (irq->fn == NULL) { - irq->devid = devid; - irq->fn = fn; - ret = 0; - } - spin_unlock_irq(&ucb->lock); - } - return ret; + ucb1x00_enable(ucb); + if (ucb->irq_ris_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + if (ucb->irq_fal_enbl & mask) + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + ucb1x00_disable(ucb); } -/** - * ucb1x00_enable_irq - enable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @edges: interrupt edges to enable - * - * Enable the specified interrupt to trigger on %UCB_RISING, - * %UCB_FALLING or both edges. The interrupt should have been - * hooked by ucb1x00_hook_irq. - */ -void ucb1x00_enable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_noop(struct irq_data *data) { - unsigned long flags; +} - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); +static void ucb1x00_irq_mask(struct irq_data *data) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl |= 1 << idx; - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask &= ~mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); } -/** - * ucb1x00_disable_irq - disable an UCB1x00 interrupt source - * @ucb: UCB1x00 structure describing chip - * @edges: interrupt edges to disable - * - * Disable the specified interrupt triggering on the specified - * (%UCB_RISING, %UCB_FALLING or both) edges. - */ -void ucb1x00_disable_irq(struct ucb1x00 *ucb, unsigned int idx, int edges) +static void ucb1x00_irq_unmask(struct irq_data *data) { - unsigned long flags; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx < 16) { - spin_lock_irqsave(&ucb->lock, flags); - - ucb1x00_enable(ucb); - if (edges & UCB_RISING) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - } - if (edges & UCB_FALLING) { - ucb->irq_fal_enbl &= ~(1 << idx); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - } - ucb1x00_disable(ucb); - spin_unlock_irqrestore(&ucb->lock, flags); - } + raw_spin_lock(&ucb->irq_lock); + ucb->irq_mask |= mask; + ucb1x00_irq_update(ucb, mask); + raw_spin_unlock(&ucb->irq_lock); } -/** - * ucb1x00_free_irq - disable and free the specified UCB1x00 interrupt - * @ucb: UCB1x00 structure describing chip - * @idx: interrupt index - * @devid: device id. - * - * Disable the interrupt source and remove the handler. devid must - * match the devid passed when hooking the interrupt. - * - * Returns zero on success, or one of the following errors: - * -EINVAL if the interrupt index is invalid - * -ENOENT if devid does not match - */ -int ucb1x00_free_irq(struct ucb1x00 *ucb, unsigned int idx, void *devid) +static int ucb1x00_irq_set_type(struct irq_data *data, unsigned int type) { - struct ucb1x00_irq *irq; - int ret; + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + unsigned mask = 1 << (data->irq - ucb->irq_base); - if (idx >= 16) - goto bad; + raw_spin_lock(&ucb->irq_lock); + if (type & IRQ_TYPE_EDGE_RISING) + ucb->irq_ris_enbl |= mask; + else + ucb->irq_ris_enbl &= ~mask; - irq = ucb->irq_handler + idx; - ret = -ENOENT; + if (type & IRQ_TYPE_EDGE_FALLING) + ucb->irq_fal_enbl |= mask; + else + ucb->irq_fal_enbl &= ~mask; + if (ucb->irq_mask & mask) { + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + } + raw_spin_unlock(&ucb->irq_lock); - spin_lock_irq(&ucb->lock); - if (irq->devid == devid) { - ucb->irq_ris_enbl &= ~(1 << idx); - ucb->irq_fal_enbl &= ~(1 << idx); + return 0; +} - ucb1x00_enable(ucb); - ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl); - ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl); - ucb1x00_disable(ucb); +static int ucb1x00_irq_set_wake(struct irq_data *data, unsigned int on) +{ + struct ucb1x00 *ucb = irq_data_get_irq_chip_data(data); + struct ucb1x00_plat_data *pdata = ucb->mcp->attached_device.platform_data; + unsigned mask = 1 << (data->irq - ucb->irq_base); - irq->fn = NULL; - irq->devid = NULL; - ret = 0; - } - spin_unlock_irq(&ucb->lock); - return ret; + if (!pdata || !pdata->can_wakeup) + return -EINVAL; -bad: - printk(KERN_ERR "Freeing bad UCB1x00 irq %d\n", idx); - return -EINVAL; + raw_spin_lock(&ucb->irq_lock); + if (on) + ucb->irq_wake |= mask; + else + ucb->irq_wake &= ~mask; + raw_spin_unlock(&ucb->irq_lock); + + return 0; } +static struct irq_chip ucb1x00_irqchip = { + .name = "ucb1x00", + .irq_ack = ucb1x00_irq_noop, + .irq_mask = ucb1x00_irq_mask, + .irq_unmask = ucb1x00_irq_unmask, + .irq_set_type = ucb1x00_irq_set_type, + .irq_set_wake = ucb1x00_irq_set_wake, +}; + static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) { struct ucb1x00_dev *dev; @@ -440,8 +403,8 @@ static int ucb1x00_add_dev(struct ucb1x00 *ucb, struct ucb1x00_driver *drv) ret = drv->add(dev); if (ret == 0) { - list_add(&dev->dev_node, &ucb->devs); - list_add(&dev->drv_node, &drv->devs); + list_add_tail(&dev->dev_node, &ucb->devs); + list_add_tail(&dev->drv_node, &drv->devs); } else { kfree(dev); } @@ -533,98 +496,126 @@ static struct class ucb1x00_class = { static int ucb1x00_probe(struct mcp *mcp) { - struct ucb1x00 *ucb; + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00_driver *drv; - unsigned int id; + struct ucb1x00 *ucb; + unsigned id, i, irq_base; int ret = -ENODEV; - int temp; + + /* Tell the platform to deassert the UCB1x00 reset */ + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE); mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); + mcp_disable(mcp); if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); - goto err_disable; + goto out; } ucb = kzalloc(sizeof(struct ucb1x00), GFP_KERNEL); ret = -ENOMEM; if (!ucb) - goto err_disable; - + goto out; + device_initialize(&ucb->dev); ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; dev_set_name(&ucb->dev, "ucb1x00"); - spin_lock_init(&ucb->lock); + raw_spin_lock_init(&ucb->irq_lock); spin_lock_init(&ucb->io_lock); - sema_init(&ucb->adc_sem, 1); + mutex_init(&ucb->adc_mutex); ucb->id = id; ucb->mcp = mcp; + + ret = device_add(&ucb->dev); + if (ret) + goto err_dev_add; + + ucb1x00_enable(ucb); ucb->irq = ucb1x00_detect_irq(ucb); + ucb1x00_disable(ucb); if (ucb->irq == NO_IRQ) { - printk(KERN_ERR "UCB1x00: IRQ probe failed\n"); + dev_err(&ucb->dev, "IRQ probe failed\n"); ret = -ENODEV; - goto err_free; + goto err_no_irq; } ucb->gpio.base = -1; - if (mcp->gpio_base != 0) { + irq_base = pdata ? pdata->irq_base : 0; + ucb->irq_base = irq_alloc_descs(-1, irq_base, 16, -1); + if (ucb->irq_base < 0) { + dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n", + ucb->irq_base); + goto err_irq_alloc; + } + + for (i = 0; i < 16; i++) { + unsigned irq = ucb->irq_base + i; + + irq_set_chip_and_handler(irq, &ucb1x00_irqchip, handle_edge_irq); + irq_set_chip_data(irq, ucb); + set_irq_flags(irq, IRQF_VALID | IRQ_NOREQUEST); + } + + irq_set_irq_type(ucb->irq, IRQ_TYPE_EDGE_RISING); + irq_set_handler_data(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, ucb1x00_irq); + + if (pdata && pdata->gpio_base) { ucb->gpio.label = dev_name(&ucb->dev); - ucb->gpio.base = mcp->gpio_base; + ucb->gpio.dev = &ucb->dev; + ucb->gpio.owner = THIS_MODULE; + ucb->gpio.base = pdata->gpio_base; ucb->gpio.ngpio = 10; ucb->gpio.set = ucb1x00_gpio_set; ucb->gpio.get = ucb1x00_gpio_get; ucb->gpio.direction_input = ucb1x00_gpio_direction_input; ucb->gpio.direction_output = ucb1x00_gpio_direction_output; + ucb->gpio.to_irq = ucb1x00_to_irq; ret = gpiochip_add(&ucb->gpio); if (ret) - goto err_free; + goto err_gpio_add; } else dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); - ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, - "UCB1x00", ucb); - if (ret) { - printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", - ucb->irq, ret); - goto err_gpio; - } - mcp_set_drvdata(mcp, ucb); - ret = device_register(&ucb->dev); - if (ret) - goto err_irq; - + if (pdata) + device_set_wakeup_capable(&ucb->dev, pdata->can_wakeup); INIT_LIST_HEAD(&ucb->devs); mutex_lock(&ucb1x00_mutex); - list_add(&ucb->node, &ucb1x00_devices); + list_add_tail(&ucb->node, &ucb1x00_devices); list_for_each_entry(drv, &ucb1x00_drivers, node) { ucb1x00_add_dev(ucb, drv); } mutex_unlock(&ucb1x00_mutex); - goto out; + return ret; - err_irq: - free_irq(ucb->irq, ucb); - err_gpio: - if (ucb->gpio.base != -1) - temp = gpiochip_remove(&ucb->gpio); - err_free: - kfree(ucb); - err_disable: - mcp_disable(mcp); + err_gpio_add: + irq_set_chained_handler(ucb->irq, NULL); + err_irq_alloc: + if (ucb->irq_base > 0) + irq_free_descs(ucb->irq_base, 16); + err_no_irq: + device_del(&ucb->dev); + err_dev_add: + put_device(&ucb->dev); out: + if (pdata && pdata->reset) + pdata->reset(UCB_RST_PROBE_FAIL); return ret; } static void ucb1x00_remove(struct mcp *mcp) { + struct ucb1x00_plat_data *pdata = mcp->attached_device.platform_data; struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct list_head *l, *n; int ret; @@ -643,8 +634,12 @@ static void ucb1x00_remove(struct mcp *mcp) dev_err(&ucb->dev, "Can't remove gpio chip: %d\n", ret); } - free_irq(ucb->irq, ucb); + irq_set_chained_handler(ucb->irq, NULL); + irq_free_descs(ucb->irq_base, 16); device_unregister(&ucb->dev); + + if (pdata && pdata->reset) + pdata->reset(UCB_RST_REMOVE); } int ucb1x00_register_driver(struct ucb1x00_driver *drv) @@ -653,7 +648,7 @@ int ucb1x00_register_driver(struct ucb1x00_driver *drv) INIT_LIST_HEAD(&drv->devs); mutex_lock(&ucb1x00_mutex); - list_add(&drv->node, &ucb1x00_drivers); + list_add_tail(&drv->node, &ucb1x00_drivers); list_for_each_entry(ucb, &ucb1x00_devices, node) { ucb1x00_add_dev(ucb, drv); } @@ -674,44 +669,86 @@ void ucb1x00_unregister_driver(struct ucb1x00_driver *drv) mutex_unlock(&ucb1x00_mutex); } -static int ucb1x00_suspend(struct mcp *mcp, pm_message_t state) +static int ucb1x00_suspend(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00_plat_data *pdata = dev->platform_data; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->suspend) - dev->drv->suspend(dev, state); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->suspend) + udev->drv->suspend(udev); } mutex_unlock(&ucb1x00_mutex); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_enable(ucb); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_wake); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_wake); + ucb1x00_disable(ucb); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + enable_irq_wake(ucb->irq); + } else if (pdata && pdata->reset) + pdata->reset(UCB_RST_SUSPEND); + return 0; } -static int ucb1x00_resume(struct mcp *mcp) +static int ucb1x00_resume(struct device *dev) { - struct ucb1x00 *ucb = mcp_get_drvdata(mcp); - struct ucb1x00_dev *dev; + struct ucb1x00_plat_data *pdata = dev->platform_data; + struct ucb1x00 *ucb = dev_get_drvdata(dev); + struct ucb1x00_dev *udev; + + if (!ucb->irq_wake && pdata && pdata->reset) + pdata->reset(UCB_RST_RESUME); + ucb1x00_enable(ucb); ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + + if (ucb->irq_wake) { + unsigned long flags; + + raw_spin_lock_irqsave(&ucb->irq_lock, flags); + ucb1x00_reg_write(ucb, UCB_IE_RIS, ucb->irq_ris_enbl & + ucb->irq_mask); + ucb1x00_reg_write(ucb, UCB_IE_FAL, ucb->irq_fal_enbl & + ucb->irq_mask); + raw_spin_unlock_irqrestore(&ucb->irq_lock, flags); + + disable_irq_wake(ucb->irq); + } + ucb1x00_disable(ucb); + mutex_lock(&ucb1x00_mutex); - list_for_each_entry(dev, &ucb->devs, dev_node) { - if (dev->drv->resume) - dev->drv->resume(dev); + list_for_each_entry(udev, &ucb->devs, dev_node) { + if (udev->drv->resume) + udev->drv->resume(udev); } mutex_unlock(&ucb1x00_mutex); return 0; } +static const struct dev_pm_ops ucb1x00_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ucb1x00_suspend, ucb1x00_resume) +}; + static struct mcp_driver ucb1x00_driver = { .drv = { .name = "ucb1x00", + .owner = THIS_MODULE, + .pm = &ucb1x00_pm_ops, }, .probe = ucb1x00_probe, .remove = ucb1x00_remove, - .suspend = ucb1x00_suspend, - .resume = ucb1x00_resume, }; static int __init ucb1x00_init(void) @@ -742,14 +779,10 @@ EXPORT_SYMBOL(ucb1x00_adc_enable); EXPORT_SYMBOL(ucb1x00_adc_read); EXPORT_SYMBOL(ucb1x00_adc_disable); -EXPORT_SYMBOL(ucb1x00_hook_irq); -EXPORT_SYMBOL(ucb1x00_free_irq); -EXPORT_SYMBOL(ucb1x00_enable_irq); -EXPORT_SYMBOL(ucb1x00_disable_irq); - EXPORT_SYMBOL(ucb1x00_register_driver); EXPORT_SYMBOL(ucb1x00_unregister_driver); +MODULE_ALIAS("mcp:ucb1x00"); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("UCB1x00 core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 63a3cbdfa3f3..1e0e20c0e082 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -20,8 +20,9 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/init.h> -#include <linux/smp.h> +#include <linux/interrupt.h> #include <linux/sched.h> +#include <linux/spinlock.h> #include <linux/completion.h> #include <linux/delay.h> #include <linux/string.h> @@ -32,7 +33,6 @@ #include <linux/kthread.h> #include <linux/mfd/ucb1x00.h> -#include <mach/dma.h> #include <mach/collie.h> #include <asm/mach-types.h> @@ -42,6 +42,8 @@ struct ucb1x00_ts { struct input_dev *idev; struct ucb1x00 *ucb; + spinlock_t irq_lock; + unsigned irq_disabled; wait_queue_head_t irq_wait; struct task_struct *rtask; u16 x_res; @@ -238,7 +240,12 @@ static int ucb1x00_thread(void *_ts) if (ucb1x00_ts_pen_down(ts)) { set_current_state(TASK_INTERRUPTIBLE); - ucb1x00_enable_irq(ts->ucb, UCB_IRQ_TSPX, machine_is_collie() ? UCB_RISING : UCB_FALLING); + spin_lock_irq(&ts->irq_lock); + if (ts->irq_disabled) { + ts->irq_disabled = 0; + enable_irq(ts->ucb->irq_base + UCB_IRQ_TSPX); + } + spin_unlock_irq(&ts->irq_lock); ucb1x00_disable(ts->ucb); /* @@ -281,23 +288,37 @@ static int ucb1x00_thread(void *_ts) * We only detect touch screen _touches_ with this interrupt * handler, and even then we just schedule our task. */ -static void ucb1x00_ts_irq(int idx, void *id) +static irqreturn_t ucb1x00_ts_irq(int irq, void *id) { struct ucb1x00_ts *ts = id; - ucb1x00_disable_irq(ts->ucb, UCB_IRQ_TSPX, UCB_FALLING); + spin_lock(&ts->irq_lock); + ts->irq_disabled = 1; + disable_irq_nosync(ts->ucb->irq_base + UCB_IRQ_TSPX); + spin_unlock(&ts->irq_lock); wake_up(&ts->irq_wait); + + return IRQ_HANDLED; } static int ucb1x00_ts_open(struct input_dev *idev) { struct ucb1x00_ts *ts = input_get_drvdata(idev); + unsigned long flags = 0; int ret = 0; BUG_ON(ts->rtask); + if (machine_is_collie()) + flags = IRQF_TRIGGER_RISING; + else + flags = IRQF_TRIGGER_FALLING; + + ts->irq_disabled = 0; + init_waitqueue_head(&ts->irq_wait); - ret = ucb1x00_hook_irq(ts->ucb, UCB_IRQ_TSPX, ucb1x00_ts_irq, ts); + ret = request_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ucb1x00_ts_irq, + flags, "ucb1x00-ts", ts); if (ret < 0) goto out; @@ -314,7 +335,7 @@ static int ucb1x00_ts_open(struct input_dev *idev) if (!IS_ERR(ts->rtask)) { ret = 0; } else { - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ts->rtask = NULL; ret = -EFAULT; } @@ -334,7 +355,7 @@ static void ucb1x00_ts_close(struct input_dev *idev) kthread_stop(ts->rtask); ucb1x00_enable(ts->ucb); - ucb1x00_free_irq(ts->ucb, UCB_IRQ_TSPX, ts); + free_irq(ts->ucb->irq_base + UCB_IRQ_TSPX, ts); ucb1x00_reg_write(ts->ucb, UCB_TS_CR, 0); ucb1x00_disable(ts->ucb); } @@ -359,11 +380,13 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ts->ucb = dev->ucb; ts->idev = idev; ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; + spin_lock_init(&ts->irq_lock); idev->name = "Touchscreen panel"; idev->id.product = ts->ucb->id; idev->open = ucb1x00_ts_open; idev->close = ucb1x00_ts_close; + idev->dev.parent = &ts->ucb->dev; idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); diff --git a/drivers/mtd/maps/sa1100-flash.c b/drivers/mtd/maps/sa1100-flash.c index 502821997707..cbc3b7867910 100644 --- a/drivers/mtd/maps/sa1100-flash.c +++ b/drivers/mtd/maps/sa1100-flash.c @@ -23,106 +23,6 @@ #include <asm/sizes.h> #include <asm/mach/flash.h> -#if 0 -/* - * This is here for documentation purposes only - until these people - * submit their machine types. It will be gone January 2005. - */ -static struct mtd_partition consus_partitions[] = { - { - .name = "Consus boot firmware", - .offset = 0, - .size = 0x00040000, - .mask_flags = MTD_WRITABLE, /* force read-only */ - }, { - .name = "Consus kernel", - .offset = 0x00040000, - .size = 0x00100000, - .mask_flags = 0, - }, { - .name = "Consus disk", - .offset = 0x00140000, - /* The rest (up to 16M) for jffs. We could put 0 and - make it find the size automatically, but right now - i have 32 megs. jffs will use all 32 megs if given - the chance, and this leads to horrible problems - when you try to re-flash the image because blob - won't erase the whole partition. */ - .size = 0x01000000 - 0x00140000, - .mask_flags = 0, - }, { - /* this disk is a secondary disk, which can be used as - needed, for simplicity, make it the size of the other - consus partition, although realistically it could be - the remainder of the disk (depending on the file - system used) */ - .name = "Consus disk2", - .offset = 0x01000000, - .size = 0x01000000 - 0x00140000, - .mask_flags = 0, - } -}; - -/* Frodo has 2 x 16M 28F128J3A flash chips in bank 0: */ -static struct mtd_partition frodo_partitions[] = -{ - { - .name = "bootloader", - .size = 0x00040000, - .offset = 0x00000000, - .mask_flags = MTD_WRITEABLE - }, { - .name = "bootloader params", - .size = 0x00040000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "kernel", - .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "ramdisk", - .size = 0x00400000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - }, { - .name = "file system", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND - } -}; - -static struct mtd_partition jornada56x_partitions[] = { - { - .name = "bootldr", - .size = 0x00040000, - .offset = 0, - .mask_flags = MTD_WRITEABLE, - }, { - .name = "rootfs", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static void jornada56x_set_vpp(int vpp) -{ - if (vpp) - GPSR = GPIO_GPIO26; - else - GPCR = GPIO_GPIO26; - GPDR |= GPIO_GPIO26; -} - -/* - * Machine Phys Size set_vpp - * Consus : SA1100_CS0_PHYS SZ_32M - * Frodo : SA1100_CS0_PHYS SZ_32M - * Jornada56x: SA1100_CS0_PHYS SZ_32M jornada56x_set_vpp - */ -#endif - struct sa_subdev_info { char name[16]; struct map_info map; @@ -373,21 +273,9 @@ static int __exit sa1100_mtd_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static void sa1100_mtd_shutdown(struct platform_device *dev) -{ - struct sa_info *info = platform_get_drvdata(dev); - if (info && mtd_suspend(info->mtd) == 0) - mtd_resume(info->mtd); -} -#else -#define sa1100_mtd_shutdown NULL -#endif - static struct platform_driver sa1100_mtd_driver = { .probe = sa1100_mtd_probe, .remove = __exit_p(sa1100_mtd_remove), - .shutdown = sa1100_mtd_shutdown, .driver = { .name = "sa1100-mtd", .owner = THIS_MODULE, diff --git a/drivers/net/ethernet/smsc/smc91x.c b/drivers/net/ethernet/smsc/smc91x.c index 64ad3ed74495..0dba0501b712 100644 --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -2281,7 +2281,7 @@ static int __devinit smc_drv_probe(struct platform_device *pdev) if (ret) goto out_release_io; #if defined(CONFIG_SA1100_ASSABET) - NCR_0 |= NCR_ENET_OSC_EN; + neponset_ncr_set(NCR_ENET_OSC_EN); #endif platform_set_drvdata(pdev, ndev); ret = smc_enable_device(pdev); diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index e535137eb2d0..468047866c8c 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -356,7 +356,7 @@ config VLSI_FIR config SA1100_FIR tristate "SA1100 Internal IR" - depends on ARCH_SA1100 && IRDA + depends on ARCH_SA1100 && IRDA && DMA_SA11X0 config VIA_FIR tristate "VIA VT8231/VT1211 SIR/MIR/FIR" diff --git a/drivers/net/irda/sa1100_ir.c b/drivers/net/irda/sa1100_ir.c index da2705061a60..a0d1913a58d3 100644 --- a/drivers/net/irda/sa1100_ir.c +++ b/drivers/net/irda/sa1100_ir.c @@ -15,7 +15,7 @@ * This driver takes one kernel command line parameter, sa1100ir=, with * the following options: * max_rate:baudrate - set the maximum baud rate - * power_leve:level - set the transmitter power level + * power_level:level - set the transmitter power level * tx_lpm:0|1 - set transmit low power mode */ #include <linux/module.h> @@ -30,13 +30,13 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/sa11x0-dma.h> #include <net/irda/irda.h> #include <net/irda/wrapper.h> #include <net/irda/irda_device.h> -#include <asm/irq.h> -#include <mach/dma.h> #include <mach/hardware.h> #include <asm/mach/irda.h> @@ -44,8 +44,15 @@ static int power_level = 3; static int tx_lpm; static int max_rate = 4000000; +struct sa1100_buf { + struct device *dev; + struct sk_buff *skb; + struct scatterlist sg; + struct dma_chan *chan; + dma_cookie_t cookie; +}; + struct sa1100_irda { - unsigned char hscr0; unsigned char utcr4; unsigned char power; unsigned char open; @@ -53,12 +60,8 @@ struct sa1100_irda { int speed; int newspeed; - struct sk_buff *txskb; - struct sk_buff *rxskb; - dma_addr_t txbuf_dma; - dma_addr_t rxbuf_dma; - dma_regs_t *txdma; - dma_regs_t *rxdma; + struct sa1100_buf dma_rx; + struct sa1100_buf dma_tx; struct device *dev; struct irda_platform_data *pdata; @@ -67,23 +70,103 @@ struct sa1100_irda { iobuff_t tx_buff; iobuff_t rx_buff; + + int (*tx_start)(struct sk_buff *, struct net_device *, struct sa1100_irda *); + irqreturn_t (*irq)(struct net_device *, struct sa1100_irda *); }; +static int sa1100_irda_set_speed(struct sa1100_irda *, int); + #define IS_FIR(si) ((si)->speed >= 4000000) #define HPSIR_MAX_RXLEN 2047 +static struct dma_slave_config sa1100_irda_sir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2UTDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 4, +}; + +static struct dma_slave_config sa1100_irda_fir_rx = { + .direction = DMA_FROM_DEVICE, + .src_addr = __PREG(Ser2HSDR), + .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .src_maxburst = 8, +}; + +static struct dma_slave_config sa1100_irda_fir_tx = { + .direction = DMA_TO_DEVICE, + .dst_addr = __PREG(Ser2HSDR), + .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, + .dst_maxburst = 8, +}; + +static unsigned sa1100_irda_dma_xferred(struct sa1100_buf *buf) +{ + struct dma_chan *chan = buf->chan; + struct dma_tx_state state; + enum dma_status status; + + status = chan->device->device_tx_status(chan, buf->cookie, &state); + if (status != DMA_PAUSED) + return 0; + + return sg_dma_len(&buf->sg) - state.residue; +} + +static int sa1100_irda_dma_request(struct device *dev, struct sa1100_buf *buf, + const char *name, struct dma_slave_config *cfg) +{ + dma_cap_mask_t m; + int ret; + + dma_cap_zero(m); + dma_cap_set(DMA_SLAVE, m); + + buf->chan = dma_request_channel(m, sa11x0_dma_filter_fn, (void *)name); + if (!buf->chan) { + dev_err(dev, "unable to request DMA channel for %s\n", + name); + return -ENOENT; + } + + ret = dmaengine_slave_config(buf->chan, cfg); + if (ret) + dev_warn(dev, "DMA slave_config for %s returned %d\n", + name, ret); + + buf->dev = buf->chan->device->dev; + + return 0; +} + +static void sa1100_irda_dma_start(struct sa1100_buf *buf, + enum dma_transfer_direction dir, dma_async_tx_callback cb, void *cb_p) +{ + struct dma_async_tx_descriptor *desc; + struct dma_chan *chan = buf->chan; + + desc = chan->device->device_prep_slave_sg(chan, &buf->sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (desc) { + desc->callback = cb; + desc->callback_param = cb_p; + buf->cookie = dmaengine_submit(desc); + dma_async_issue_pending(chan); + } +} + /* * Allocate and map the receive buffer, unless it is already allocated. */ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) { - if (si->rxskb) + if (si->dma_rx.skb) return 0; - si->rxskb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); - - if (!si->rxskb) { + si->dma_rx.skb = alloc_skb(HPSIR_MAX_RXLEN + 1, GFP_ATOMIC); + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: out of memory for RX SKB\n"); return -ENOMEM; } @@ -92,11 +175,14 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) * Align any IP headers that may be contained * within the frame. */ - skb_reserve(si->rxskb, 1); + skb_reserve(si->dma_rx.skb, 1); + + sg_set_buf(&si->dma_rx.sg, si->dma_rx.skb->data, HPSIR_MAX_RXLEN); + if (dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE) == 0) { + dev_kfree_skb_any(si->dma_rx.skb); + return -ENOMEM; + } - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); return 0; } @@ -106,7 +192,7 @@ static int sa1100_irda_rx_alloc(struct sa1100_irda *si) */ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) { - if (!si->rxskb) { + if (!si->dma_rx.skb) { printk(KERN_ERR "sa1100_ir: rx buffer went missing\n"); return; } @@ -114,254 +200,87 @@ static void sa1100_irda_rx_dma_start(struct sa1100_irda *si) /* * First empty receive FIFO */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Enable the DMA, receiver and receive interrupt. */ - sa1100_clear_dma(si->rxdma); - sa1100_start_dma(si->rxdma, si->rxbuf_dma, HPSIR_MAX_RXLEN); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_RXE; + dmaengine_terminate_all(si->dma_rx.chan); + sa1100_irda_dma_start(&si->dma_rx, DMA_DEV_TO_MEM, NULL, NULL); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_RXE; } -/* - * Set the IrDA communications speed. - */ -static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) +static void sa1100_irda_check_speed(struct sa1100_irda *si) { - unsigned long flags; - int brd, ret = -EINVAL; - - switch (speed) { - case 9600: case 19200: case 38400: - case 57600: case 115200: - brd = 3686400 / (16 * speed) - 1; - - /* - * Stop the receive DMA. - */ - if (IS_FIR(si)) - sa1100_stop_dma(si->rxdma); - - local_irq_save(flags); - - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - - Ser2UTCR1 = brd >> 8; - Ser2UTCR2 = brd; - - /* - * Clear status register - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - si->speed = speed; - - local_irq_restore(flags); - ret = 0; - break; - - case 4000000: - local_irq_save(flags); - - si->hscr0 = 0; - - Ser2HSSR0 = 0xff; - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; - Ser2UTCR3 = 0; - - si->speed = speed; - - if (si->pdata->set_speed) - si->pdata->set_speed(si->dev, speed); - - sa1100_irda_rx_alloc(si); - sa1100_irda_rx_dma_start(si); - - local_irq_restore(flags); - - break; - - default: - break; + if (si->newspeed) { + sa1100_irda_set_speed(si, si->newspeed); + si->newspeed = 0; } - - return ret; } /* - * Control the power state of the IrDA transmitter. - * State: - * 0 - off - * 1 - short range, lowest power - * 2 - medium range, medium power - * 3 - maximum range, high power - * - * Currently, only assabet is known to support this. + * HP-SIR format support. */ -static int -__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +static void sa1100_irda_sirtxdma_irq(void *id) { - int ret = 0; - if (si->pdata->set_power) - ret = si->pdata->set_power(si->dev, state); - return ret; -} - -static inline int -sa1100_set_power(struct sa1100_irda *si, unsigned int state) -{ - int ret; - - ret = __sa1100_irda_set_power(si, state); - if (ret == 0) - si->power = state; + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); - return ret; -} + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE); + dev_kfree_skb(si->dma_tx.skb); + si->dma_tx.skb = NULL; -static int sa1100_irda_startup(struct sa1100_irda *si) -{ - int ret; + dev->stats.tx_packets++; + dev->stats.tx_bytes += sg_dma_len(&si->dma_tx.sg); - /* - * Ensure that the ports for this device are setup correctly. - */ - if (si->pdata->startup) { - ret = si->pdata->startup(si->dev); - if (ret) - return ret; - } - - /* - * Configure PPC for IRDA - we want to drive TXD2 low. - * We also want to drive this pin low during sleep. - */ - PPSR &= ~PPC_TXD2; - PSDR &= ~PPC_TXD2; - PPDR |= PPC_TXD2; - - /* - * Enable HP-SIR modulation, and ensure that the port is disabled. - */ - Ser2UTCR3 = 0; - Ser2HSCR0 = HSCR0_UART; - Ser2UTCR4 = si->utcr4; - Ser2UTCR0 = UTCR0_8BitData; - Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + /* We need to ensure that the transmitter has finished. */ + do + rmb(); + while (Ser2UTSR1 & UTSR1_TBY); /* - * Clear status register + * Ok, we've finished transmitting. Now enable the receiver. + * Sometimes we get a receive IRQ immediately after a transmit... */ Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; - ret = sa1100_irda_set_speed(si, si->speed = 9600); - if (ret) { - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; - - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); - } - - return ret; -} - -static void sa1100_irda_shutdown(struct sa1100_irda *si) -{ - /* - * Stop all DMA activity. - */ - sa1100_stop_dma(si->rxdma); - sa1100_stop_dma(si->txdma); - - /* Disable the port. */ - Ser2UTCR3 = 0; - Ser2HSCR0 = 0; + sa1100_irda_check_speed(si); - if (si->pdata->shutdown) - si->pdata->shutdown(si->dev); + /* I'm hungry! */ + netif_wake_queue(dev); } -#ifdef CONFIG_PM -/* - * Suspend the IrDA interface. - */ -static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +static int sa1100_irda_sir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) { - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; - - si = netdev_priv(dev); - if (si->open) { - /* - * Stop the transmit queue - */ - netif_device_detach(dev); - disable_irq(dev->irq); - sa1100_irda_shutdown(si); - __sa1100_irda_set_power(si, 0); + si->tx_buff.data = si->tx_buff.head; + si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, + si->tx_buff.truesize); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, si->tx_buff.data, si->tx_buff.len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + return NETDEV_TX_OK; } - return 0; -} - -/* - * Resume the IrDA interface. - */ -static int sa1100_irda_resume(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - struct sa1100_irda *si; - - if (!dev) - return 0; + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_sirtxdma_irq, dev); - si = netdev_priv(dev); - if (si->open) { - /* - * If we missed a speed change, initialise at the new speed - * directly. It is debatable whether this is actually - * required, but in the interests of continuing from where - * we left off it is desirable. The converse argument is - * that we should re-negotiate at 9600 baud again. - */ - if (si->newspeed) { - si->speed = si->newspeed; - si->newspeed = 0; - } - - sa1100_irda_startup(si); - __sa1100_irda_set_power(si, si->power); - enable_irq(dev->irq); - - /* - * This automatically wakes up the queue - */ - netif_device_attach(dev); - } + /* + * The mean turn-around time is enforced by XBOF padding, + * so we don't have to do anything special here. + */ + Ser2UTCR3 = UTCR3_TXE; - return 0; + return NETDEV_TX_OK; } -#else -#define sa1100_irda_suspend NULL -#define sa1100_irda_resume NULL -#endif -/* - * HP-SIR format interrupt service routines. - */ -static void sa1100_irda_hpsir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_sir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); int status; status = Ser2UTSR0; @@ -414,51 +333,96 @@ static void sa1100_irda_hpsir_irq(struct net_device *dev) } - if (status & UTSR0_TFS && si->tx_buff.len) { - /* - * Transmitter FIFO is not full - */ - do { - Ser2UTDR = *si->tx_buff.data++; - si->tx_buff.len -= 1; - } while (Ser2UTSR1 & UTSR1_TNF && si->tx_buff.len); + return IRQ_HANDLED; +} - if (si->tx_buff.len == 0) { - dev->stats.tx_packets++; - dev->stats.tx_bytes += si->tx_buff.data - - si->tx_buff.head; +/* + * FIR format support. + */ +static void sa1100_irda_firtxdma_irq(void *id) +{ + struct net_device *dev = id; + struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; - /* - * We need to ensure that the transmitter has - * finished. - */ - do - rmb(); - while (Ser2UTSR1 & UTSR1_TBY); + /* + * Wait for the transmission to complete. Unfortunately, + * the hardware doesn't give us an interrupt to indicate + * "end of frame". + */ + do + rmb(); + while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); - /* - * Ok, we've finished transmitting. Now enable - * the receiver. Sometimes we get a receive IRQ - * immediately after a transmit... - */ - Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; - Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + /* + * Clear the transmit underrun bit. + */ + Ser2HSSR0 = HSSR0_TUR; - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + /* + * Do we need to change speed? Note that we're lazy + * here - we don't free the old dma_rx.skb. We don't need + * to allocate a buffer either. + */ + sa1100_irda_check_speed(si); - /* I'm hungry! */ - netif_wake_queue(dev); - } + /* + * Start reception. This disables the transmitter for + * us. This will be using the existing RX buffer. + */ + sa1100_irda_rx_dma_start(si); + + /* Account and free the packet. */ + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev->stats.tx_packets ++; + dev->stats.tx_bytes += skb->len; + dev_kfree_skb_irq(skb); + si->dma_tx.skb = NULL; } + + /* + * Make sure that the TX queue is available for sending + * (for retries). TX has priority over RX at all times. + */ + netif_wake_queue(dev); +} + +static int sa1100_irda_fir_tx_start(struct sk_buff *skb, struct net_device *dev, + struct sa1100_irda *si) +{ + int mtt = irda_get_mtt(skb); + + si->dma_tx.skb = skb; + sg_set_buf(&si->dma_tx.sg, skb->data, skb->len); + if (dma_map_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, DMA_TO_DEVICE) == 0) { + si->dma_tx.skb = NULL; + netif_wake_queue(dev); + dev->stats.tx_dropped++; + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + sa1100_irda_dma_start(&si->dma_tx, DMA_MEM_TO_DEV, sa1100_irda_firtxdma_irq, dev); + + /* + * If we have a mean turn-around time, impose the specified + * specified delay. We could shorten this by timing from + * the point we received the packet. + */ + if (mtt) + udelay(mtt); + + Ser2HSCR0 = HSCR0_HSSP | HSCR0_TXE; + + return NETDEV_TX_OK; } static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev) { - struct sk_buff *skb = si->rxskb; - dma_addr_t dma_addr; + struct sk_buff *skb = si->dma_rx.skb; unsigned int len, stat, data; if (!skb) { @@ -469,11 +433,10 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev /* * Get the current data position. */ - dma_addr = sa1100_get_dma_pos(si->rxdma); - len = dma_addr - si->rxbuf_dma; + len = sa1100_irda_dma_xferred(&si->dma_rx); if (len > HPSIR_MAX_RXLEN) len = HPSIR_MAX_RXLEN; - dma_unmap_single(si->dev, si->rxbuf_dma, len, DMA_FROM_DEVICE); + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); do { /* @@ -501,7 +464,7 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev } while (Ser2HSSR0 & HSSR0_EIF); if (stat & HSSR1_EOF) { - si->rxskb = NULL; + si->dma_rx.skb = NULL; skb_put(skb, len); skb->dev = dev; @@ -518,28 +481,23 @@ static void sa1100_irda_fir_error(struct sa1100_irda *si, struct net_device *dev netif_rx(skb); } else { /* - * Remap the buffer. + * Remap the buffer - it was previously mapped, and we + * hope that this succeeds. */ - si->rxbuf_dma = dma_map_single(si->dev, si->rxskb->data, - HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); + dma_map_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, DMA_FROM_DEVICE); } } /* - * FIR format interrupt service routine. We only have to - * handle RX events; transmit events go via the TX DMA handler. - * - * No matter what, we disable RX, process, and the restart RX. + * We only have to handle RX events here; transmit events go via the TX + * DMA handler. We disable RX, process, and the restart RX. */ -static void sa1100_irda_fir_irq(struct net_device *dev) +static irqreturn_t sa1100_irda_fir_irq(struct net_device *dev, struct sa1100_irda *si) { - struct sa1100_irda *si = netdev_priv(dev); - /* * Stop RX DMA */ - sa1100_stop_dma(si->rxdma); + dmaengine_pause(si->dma_rx.chan); /* * Framing error - we throw away the packet completely. @@ -555,7 +513,7 @@ static void sa1100_irda_fir_irq(struct net_device *dev) /* * Clear out the DMA... */ - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP; + Ser2HSCR0 = HSCR0_HSSP; /* * Clear selected status bits now, so we @@ -577,74 +535,124 @@ static void sa1100_irda_fir_irq(struct net_device *dev) * No matter what happens, we must restart reception. */ sa1100_irda_rx_dma_start(si); -} -static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) -{ - struct net_device *dev = dev_id; - if (IS_FIR(((struct sa1100_irda *)netdev_priv(dev)))) - sa1100_irda_fir_irq(dev); - else - sa1100_irda_hpsir_irq(dev); return IRQ_HANDLED; } /* - * TX DMA completion handler. + * Set the IrDA communications speed. */ -static void sa1100_irda_txdma_irq(void *id) +static int sa1100_irda_set_speed(struct sa1100_irda *si, int speed) { - struct net_device *dev = id; - struct sa1100_irda *si = netdev_priv(dev); - struct sk_buff *skb = si->txskb; + unsigned long flags; + int brd, ret = -EINVAL; - si->txskb = NULL; + switch (speed) { + case 9600: case 19200: case 38400: + case 57600: case 115200: + brd = 3686400 / (16 * speed) - 1; - /* - * Wait for the transmission to complete. Unfortunately, - * the hardware doesn't give us an interrupt to indicate - * "end of frame". - */ - do - rmb(); - while (!(Ser2HSSR0 & HSSR0_TUR) || Ser2HSSR1 & HSSR1_TBY); + /* Stop the receive DMA, and configure transmit. */ + if (IS_FIR(si)) { + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_sir_tx); + } - /* - * Clear the transmit underrun bit. - */ - Ser2HSSR0 = HSSR0_TUR; + local_irq_save(flags); - /* - * Do we need to change speed? Note that we're lazy - * here - we don't free the old rxskb. We don't need - * to allocate a buffer either. - */ - if (si->newspeed) { - sa1100_irda_set_speed(si, si->newspeed); - si->newspeed = 0; - } + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; - /* - * Start reception. This disables the transmitter for - * us. This will be using the existing RX buffer. - */ - sa1100_irda_rx_dma_start(si); + Ser2UTCR1 = brd >> 8; + Ser2UTCR2 = brd; - /* - * Account and free the packet. - */ - if (skb) { - dma_unmap_single(si->dev, si->txbuf_dma, skb->len, DMA_TO_DEVICE); - dev->stats.tx_packets ++; - dev->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + Ser2UTCR3 = UTCR3_RIE | UTCR3_RXE | UTCR3_TXE; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + si->speed = speed; + si->tx_start = sa1100_irda_sir_tx_start; + si->irq = sa1100_irda_sir_irq; + + local_irq_restore(flags); + ret = 0; + break; + + case 4000000: + if (!IS_FIR(si)) + dmaengine_slave_config(si->dma_tx.chan, + &sa1100_irda_fir_tx); + + local_irq_save(flags); + + Ser2HSSR0 = 0xff; + Ser2HSCR0 = HSCR0_HSSP; + Ser2UTCR3 = 0; + + si->speed = speed; + si->tx_start = sa1100_irda_fir_tx_start; + si->irq = sa1100_irda_fir_irq; + + if (si->pdata->set_speed) + si->pdata->set_speed(si->dev, speed); + + sa1100_irda_rx_alloc(si); + sa1100_irda_rx_dma_start(si); + + local_irq_restore(flags); + + break; + + default: + break; } - /* - * Make sure that the TX queue is available for sending - * (for retries). TX has priority over RX at all times. - */ - netif_wake_queue(dev); + return ret; +} + +/* + * Control the power state of the IrDA transmitter. + * State: + * 0 - off + * 1 - short range, lowest power + * 2 - medium range, medium power + * 3 - maximum range, high power + * + * Currently, only assabet is known to support this. + */ +static int +__sa1100_irda_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret = 0; + if (si->pdata->set_power) + ret = si->pdata->set_power(si->dev, state); + return ret; +} + +static inline int +sa1100_set_power(struct sa1100_irda *si, unsigned int state) +{ + int ret; + + ret = __sa1100_irda_set_power(si, state); + if (ret == 0) + si->power = state; + + return ret; +} + +static irqreturn_t sa1100_irda_irq(int irq, void *dev_id) +{ + struct net_device *dev = dev_id; + struct sa1100_irda *si = netdev_priv(dev); + + return si->irq(dev, si); } static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) @@ -660,62 +668,19 @@ static int sa1100_irda_hard_xmit(struct sk_buff *skb, struct net_device *dev) if (speed != si->speed && speed != -1) si->newspeed = speed; - /* - * If this is an empty frame, we can bypass a lot. - */ + /* If this is an empty frame, we can bypass a lot. */ if (skb->len == 0) { - if (si->newspeed) { - si->newspeed = 0; - sa1100_irda_set_speed(si, speed); - } + sa1100_irda_check_speed(si); dev_kfree_skb(skb); return NETDEV_TX_OK; } - if (!IS_FIR(si)) { - netif_stop_queue(dev); - - si->tx_buff.data = si->tx_buff.head; - si->tx_buff.len = async_wrap_skb(skb, si->tx_buff.data, - si->tx_buff.truesize); - - /* - * Set the transmit interrupt enable. This will fire - * off an interrupt immediately. Note that we disable - * the receiver so we won't get spurious characteres - * received. - */ - Ser2UTCR3 = UTCR3_TIE | UTCR3_TXE; - - dev_kfree_skb(skb); - } else { - int mtt = irda_get_mtt(skb); - - /* - * We must not be transmitting... - */ - BUG_ON(si->txskb); - - netif_stop_queue(dev); - - si->txskb = skb; - si->txbuf_dma = dma_map_single(si->dev, skb->data, - skb->len, DMA_TO_DEVICE); - - sa1100_start_dma(si->txdma, si->txbuf_dma, skb->len); - - /* - * If we have a mean turn-around time, impose the specified - * specified delay. We could shorten this by timing from - * the point we received the packet. - */ - if (mtt) - udelay(mtt); + netif_stop_queue(dev); - Ser2HSCR0 = si->hscr0 | HSCR0_HSSP | HSCR0_TXE; - } + /* We must not already have a skb to transmit... */ + BUG_ON(si->dma_tx.skb); - return NETDEV_TX_OK; + return si->tx_start(skb, dev, si); } static int @@ -762,6 +727,69 @@ sa1100_irda_ioctl(struct net_device *dev, struct ifreq *ifreq, int cmd) return ret; } +static int sa1100_irda_startup(struct sa1100_irda *si) +{ + int ret; + + /* + * Ensure that the ports for this device are setup correctly. + */ + if (si->pdata->startup) { + ret = si->pdata->startup(si->dev); + if (ret) + return ret; + } + + /* + * Configure PPC for IRDA - we want to drive TXD2 low. + * We also want to drive this pin low during sleep. + */ + PPSR &= ~PPC_TXD2; + PSDR &= ~PPC_TXD2; + PPDR |= PPC_TXD2; + + /* + * Enable HP-SIR modulation, and ensure that the port is disabled. + */ + Ser2UTCR3 = 0; + Ser2HSCR0 = HSCR0_UART; + Ser2UTCR4 = si->utcr4; + Ser2UTCR0 = UTCR0_8BitData; + Ser2HSCR2 = HSCR2_TrDataH | HSCR2_RcDataL; + + /* + * Clear status register + */ + Ser2UTSR0 = UTSR0_REB | UTSR0_RBB | UTSR0_RID; + + ret = sa1100_irda_set_speed(si, si->speed = 9600); + if (ret) { + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); + } + + return ret; +} + +static void sa1100_irda_shutdown(struct sa1100_irda *si) +{ + /* + * Stop all DMA activity. + */ + dmaengine_terminate_all(si->dma_rx.chan); + dmaengine_terminate_all(si->dma_tx.chan); + + /* Disable the port. */ + Ser2UTCR3 = 0; + Ser2HSCR0 = 0; + + if (si->pdata->shutdown) + si->pdata->shutdown(si->dev); +} + static int sa1100_irda_start(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); @@ -769,26 +797,17 @@ static int sa1100_irda_start(struct net_device *dev) si->speed = 9600; - err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); - if (err) - goto err_irq; - - err = sa1100_request_dma(DMA_Ser2HSSPRd, "IrDA receive", - NULL, NULL, &si->rxdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_rx, "Ser2ICPRc", + &sa1100_irda_fir_rx); if (err) goto err_rx_dma; - err = sa1100_request_dma(DMA_Ser2HSSPWr, "IrDA transmit", - sa1100_irda_txdma_irq, dev, &si->txdma); + err = sa1100_irda_dma_request(si->dev, &si->dma_tx, "Ser2ICPTr", + &sa1100_irda_sir_tx); if (err) goto err_tx_dma; /* - * The interrupt must remain disabled for now. - */ - disable_irq(dev->irq); - - /* * Setup the serial port for the specified speed. */ err = sa1100_irda_startup(si); @@ -803,44 +822,60 @@ static int sa1100_irda_start(struct net_device *dev) if (!si->irlap) goto err_irlap; + err = request_irq(dev->irq, sa1100_irda_irq, 0, dev->name, dev); + if (err) + goto err_irq; + /* * Now enable the interrupt and start the queue */ si->open = 1; sa1100_set_power(si, power_level); /* low power mode */ - enable_irq(dev->irq); + netif_start_queue(dev); return 0; +err_irq: + irlap_close(si->irlap); err_irlap: si->open = 0; sa1100_irda_shutdown(si); err_startup: - sa1100_free_dma(si->txdma); + dma_release_channel(si->dma_tx.chan); err_tx_dma: - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_rx.chan); err_rx_dma: - free_irq(dev->irq, dev); -err_irq: return err; } static int sa1100_irda_stop(struct net_device *dev) { struct sa1100_irda *si = netdev_priv(dev); + struct sk_buff *skb; + + netif_stop_queue(dev); - disable_irq(dev->irq); + si->open = 0; sa1100_irda_shutdown(si); /* - * If we have been doing DMA receive, make sure we + * If we have been doing any DMA activity, make sure we * tidy that up cleanly. */ - if (si->rxskb) { - dma_unmap_single(si->dev, si->rxbuf_dma, HPSIR_MAX_RXLEN, - DMA_FROM_DEVICE); - dev_kfree_skb(si->rxskb); - si->rxskb = NULL; + skb = si->dma_rx.skb; + if (skb) { + dma_unmap_sg(si->dma_rx.dev, &si->dma_rx.sg, 1, + DMA_FROM_DEVICE); + dev_kfree_skb(skb); + si->dma_rx.skb = NULL; + } + + skb = si->dma_tx.skb; + if (skb) { + dma_unmap_sg(si->dma_tx.dev, &si->dma_tx.sg, 1, + DMA_TO_DEVICE); + dev_kfree_skb(skb); + si->dma_tx.skb = NULL; } /* Stop IrLAP */ @@ -849,14 +884,11 @@ static int sa1100_irda_stop(struct net_device *dev) si->irlap = NULL; } - netif_stop_queue(dev); - si->open = 0; - /* * Free resources */ - sa1100_free_dma(si->txdma); - sa1100_free_dma(si->rxdma); + dma_release_channel(si->dma_tx.chan); + dma_release_channel(si->dma_rx.chan); free_irq(dev->irq, dev); sa1100_set_power(si, 0); @@ -888,11 +920,15 @@ static int sa1100_irda_probe(struct platform_device *pdev) struct net_device *dev; struct sa1100_irda *si; unsigned int baudrate_mask; - int err; + int err, irq; if (!pdev->dev.platform_data) return -EINVAL; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return irq < 0 ? irq : -ENXIO; + err = request_mem_region(__PREG(Ser2UTCR0), 0x24, "IrDA") ? 0 : -EBUSY; if (err) goto err_mem_1; @@ -907,22 +943,27 @@ static int sa1100_irda_probe(struct platform_device *pdev) if (!dev) goto err_mem_4; + SET_NETDEV_DEV(dev, &pdev->dev); + si = netdev_priv(dev); si->dev = &pdev->dev; si->pdata = pdev->dev.platform_data; + sg_init_table(&si->dma_rx.sg, 1); + sg_init_table(&si->dma_tx.sg, 1); + /* * Initialise the HP-SIR buffers */ err = sa1100_irda_init_iobuf(&si->rx_buff, 14384); if (err) goto err_mem_5; - err = sa1100_irda_init_iobuf(&si->tx_buff, 4000); + err = sa1100_irda_init_iobuf(&si->tx_buff, IRDA_SIR_MAX_FRAME); if (err) goto err_mem_5; dev->netdev_ops = &sa1100_irda_netdev_ops; - dev->irq = IRQ_Ser2ICP; + dev->irq = irq; irda_init_max_qos_capabilies(&si->qos); @@ -996,6 +1037,74 @@ static int sa1100_irda_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM +/* + * Suspend the IrDA interface. + */ +static int sa1100_irda_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * Stop the transmit queue + */ + netif_device_detach(dev); + disable_irq(dev->irq); + sa1100_irda_shutdown(si); + __sa1100_irda_set_power(si, 0); + } + + return 0; +} + +/* + * Resume the IrDA interface. + */ +static int sa1100_irda_resume(struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sa1100_irda *si; + + if (!dev) + return 0; + + si = netdev_priv(dev); + if (si->open) { + /* + * If we missed a speed change, initialise at the new speed + * directly. It is debatable whether this is actually + * required, but in the interests of continuing from where + * we left off it is desirable. The converse argument is + * that we should re-negotiate at 9600 baud again. + */ + if (si->newspeed) { + si->speed = si->newspeed; + si->newspeed = 0; + } + + sa1100_irda_startup(si); + __sa1100_irda_set_power(si, si->power); + enable_irq(dev->irq); + + /* + * This automatically wakes up the queue + */ + netif_device_attach(dev); + } + + return 0; +} +#else +#define sa1100_irda_suspend NULL +#define sa1100_irda_resume NULL +#endif + static struct platform_driver sa1100ir_driver = { .probe = sa1100_irda_probe, .remove = sa1100_irda_remove, diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c index c95639b5f2a0..4300a7fb3edb 100644 --- a/drivers/pcmcia/sa1100_neponset.c +++ b/drivers/pcmcia/sa1100_neponset.c @@ -94,12 +94,7 @@ neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_sta ret = sa1111_pcmcia_configure_socket(skt, state); if (ret == 0) { - unsigned long flags; - - local_irq_save(flags); - NCR_0 = (NCR_0 & ~ncr_mask) | ncr_set; - - local_irq_restore(flags); + neponset_ncr_frob(ncr_mask, ncr_set); sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set); } diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 27f2fe3b7fb4..33568e18998b 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -22,6 +22,40 @@ #include "sa1111_generic.h" +/* + * These are offsets from the above base. + */ +#define PCCR 0x0000 +#define PCSSR 0x0004 +#define PCSR 0x0008 + +#define PCSR_S0_READY (1<<0) +#define PCSR_S1_READY (1<<1) +#define PCSR_S0_DETECT (1<<2) +#define PCSR_S1_DETECT (1<<3) +#define PCSR_S0_VS1 (1<<4) +#define PCSR_S0_VS2 (1<<5) +#define PCSR_S1_VS1 (1<<6) +#define PCSR_S1_VS2 (1<<7) +#define PCSR_S0_WP (1<<8) +#define PCSR_S1_WP (1<<9) +#define PCSR_S0_BVD1 (1<<10) +#define PCSR_S0_BVD2 (1<<11) +#define PCSR_S1_BVD1 (1<<12) +#define PCSR_S1_BVD2 (1<<13) + +#define PCCR_S0_RST (1<<0) +#define PCCR_S1_RST (1<<1) +#define PCCR_S0_FLT (1<<2) +#define PCCR_S1_FLT (1<<3) +#define PCCR_S0_PWAITEN (1<<4) +#define PCCR_S1_PWAITEN (1<<5) +#define PCCR_S0_PSE (1<<6) +#define PCCR_S1_PSE (1<<7) + +#define PCSSR_S0_SLEEP (1<<0) +#define PCSSR_S1_SLEEP (1<<1) + #define IDX_IRQ_S0_READY_NINT (0) #define IDX_IRQ_S0_CD_VALID (1) #define IDX_IRQ_S0_BVD1_STSCHG (2) @@ -49,7 +83,7 @@ static void sa1111_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) void sa1111_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) { struct sa1111_pcmcia_socket *s = to_skt(skt); - unsigned long status = sa1111_readl(s->dev->mapbase + SA1111_PCSR); + unsigned long status = sa1111_readl(s->dev->mapbase + PCSR); switch (skt->nr) { case 0: @@ -105,10 +139,10 @@ int sa1111_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_s pccr_set_mask |= PCCR_S0_FLT|PCCR_S1_FLT; local_irq_save(flags); - val = sa1111_readl(s->dev->mapbase + SA1111_PCCR); + val = sa1111_readl(s->dev->mapbase + PCCR); val &= ~pccr_skt_mask; val |= pccr_set_mask & pccr_skt_mask; - sa1111_writel(val, s->dev->mapbase + SA1111_PCCR); + sa1111_writel(val, s->dev->mapbase + PCCR); local_irq_restore(flags); return 0; @@ -163,12 +197,18 @@ int sa1111_pcmcia_add(struct sa1111_dev *dev, struct pcmcia_low_level *ops, static int pcmcia_probe(struct sa1111_dev *dev) { void __iomem *base; + int ret; + + ret = sa1111_enable_device(dev); + if (ret) + return ret; dev_set_drvdata(&dev->dev, NULL); - if (!request_mem_region(dev->res.start, 512, - SA1111_DRIVER_NAME(dev))) + if (!request_mem_region(dev->res.start, 512, SA1111_DRIVER_NAME(dev))) { + sa1111_disable_device(dev); return -EBUSY; + } base = dev->mapbase; @@ -181,8 +221,8 @@ static int pcmcia_probe(struct sa1111_dev *dev) /* * Initialise the suspend state. */ - sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + SA1111_PCSSR); - sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + SA1111_PCCR); + sa1111_writel(PCSSR_S0_SLEEP | PCSSR_S1_SLEEP, base + PCSSR); + sa1111_writel(PCCR_S0_FLT | PCCR_S1_FLT, base + PCCR); #ifdef CONFIG_SA1100_BADGE4 pcmcia_badge4_init(&dev->dev); @@ -212,6 +252,7 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev) } release_mem_region(dev->res.start, 512); + sa1111_disable_device(dev); return 0; } diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index cb9a585312cc..e8f1adde4d82 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -32,7 +32,7 @@ #include <linux/bitops.h> #include <mach/hardware.h> -#include <asm/irq.h> +#include <mach/irqs.h> #ifdef CONFIG_ARCH_PXA #include <mach/regs-rtc.h> diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c index ef7a21a6a01b..2ca5959ec3fa 100644 --- a/drivers/tty/serial/sa1100.c +++ b/drivers/tty/serial/sa1100.c @@ -38,6 +38,7 @@ #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/irqs.h> #include <asm/mach/serial_sa1100.h> /* We've been assigned a range on the "Low-density serial ports" major */ diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c index 4bde4f9821ba..e1004fb37bd9 100644 --- a/drivers/usb/host/ohci-sa1111.c +++ b/drivers/usb/host/ohci-sa1111.c @@ -16,29 +16,115 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <mach/assabet.h> -#include <mach/badge4.h> #include <asm/hardware/sa1111.h> #ifndef CONFIG_SA1111 #error "This file is SA-1111 bus glue. CONFIG_SA1111 must be defined." #endif -extern int usb_disabled(void); +#define USB_STATUS 0x0118 +#define USB_RESET 0x011c +#define USB_IRQTEST 0x0120 + +#define USB_RESET_FORCEIFRESET (1 << 0) +#define USB_RESET_FORCEHCRESET (1 << 1) +#define USB_RESET_CLKGENRESET (1 << 2) +#define USB_RESET_SIMSCALEDOWN (1 << 3) +#define USB_RESET_USBINTTEST (1 << 4) +#define USB_RESET_SLEEPSTBYEN (1 << 5) +#define USB_RESET_PWRSENSELOW (1 << 6) +#define USB_RESET_PWRCTRLLOW (1 << 7) + +#define USB_STATUS_IRQHCIRMTWKUP (1 << 7) +#define USB_STATUS_IRQHCIBUFFACC (1 << 8) +#define USB_STATUS_NIRQHCIM (1 << 9) +#define USB_STATUS_NHCIMFCLR (1 << 10) +#define USB_STATUS_USBPWRSENSE (1 << 11) -/*-------------------------------------------------------------------------*/ +#if 0 +static void dump_hci_status(struct usb_hcd *hcd, const char *label) +{ + unsigned long status = sa1111_readl(hcd->regs + USB_STATUS); + + dbg("%s USB_STATUS = { %s%s%s%s%s}", label, + ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), + ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), + ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), + ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), + ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); +} +#endif -static void sa1111_start_hc(struct sa1111_dev *dev) +static int ohci_sa1111_reset(struct usb_hcd *hcd) { - unsigned int usb_rst = 0; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + ohci_hcd_init(ohci); + return ohci_init(ohci); +} - printk(KERN_DEBUG "%s: starting SA-1111 OHCI USB Controller\n", - __FILE__); +static int __devinit ohci_sa1111_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - badge4_set_5V(BADGE4_5V_USB, 1); + ret = ohci_run(ohci); + if (ret < 0) { + ohci_err(ohci, "can't start\n"); + ohci_stop(hcd); } + return ret; +} + +static const struct hc_driver ohci_sa1111_hc_driver = { + .description = hcd_name, + .product_desc = "SA-1111 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sa1111_reset, + .start = ohci_sa1111_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, #endif + .start_port_reset = ohci_start_port_reset, +}; + +static int sa1111_start_hc(struct sa1111_dev *dev) +{ + unsigned int usb_rst = 0; + int ret; + + dev_dbg(&dev->dev, "starting SA-1111 OHCI USB Controller\n"); if (machine_is_xp860() || machine_has_neponset() || @@ -51,220 +137,121 @@ static void sa1111_start_hc(struct sa1111_dev *dev) * host controller in reset. */ sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Now, carefully enable the USB clock, and take * the USB host controller out of reset. */ - sa1111_enable_device(dev); - udelay(11); - sa1111_writel(usb_rst, dev->mapbase + SA1111_USB_RESET); + ret = sa1111_enable_device(dev); + if (ret == 0) { + udelay(11); + sa1111_writel(usb_rst, dev->mapbase + USB_RESET); + } + + return ret; } static void sa1111_stop_hc(struct sa1111_dev *dev) { unsigned int usb_rst; - printk(KERN_DEBUG "%s: stopping SA-1111 OHCI USB Controller\n", - __FILE__); + + dev_dbg(&dev->dev, "stopping SA-1111 OHCI USB Controller\n"); /* * Put the USB host controller into reset. */ - usb_rst = sa1111_readl(dev->mapbase + SA1111_USB_RESET); + usb_rst = sa1111_readl(dev->mapbase + USB_RESET); sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET, - dev->mapbase + SA1111_USB_RESET); + dev->mapbase + USB_RESET); /* * Stop the USB clock. */ sa1111_disable_device(dev); - -#ifdef CONFIG_SA1100_BADGE4 - if (machine_is_badge4()) { - /* Disable power to the USB bus */ - badge4_set_5V(BADGE4_5V_USB, 0); - } -#endif -} - - -/*-------------------------------------------------------------------------*/ - -#if 0 -static void dump_hci_status(struct usb_hcd *hcd, const char *label) -{ - unsigned long status = sa1111_readl(hcd->regs + SA1111_USB_STATUS); - - dbg ("%s USB_STATUS = { %s%s%s%s%s}", label, - ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""), - ((status & USB_STATUS_IRQHCIBUFFACC) ? "IRQHCIBUFFACC " : ""), - ((status & USB_STATUS_NIRQHCIM) ? "" : "IRQHCIM "), - ((status & USB_STATUS_NHCIMFCLR) ? "" : "HCIMFCLR "), - ((status & USB_STATUS_USBPWRSENSE) ? "USBPWRSENSE " : "")); } -#endif - -/*-------------------------------------------------------------------------*/ - -/* configure so an HC device and id are always provided */ -/* always called with process context; sleeping is OK */ - /** - * usb_hcd_sa1111_probe - initialize SA-1111-based HCDs - * Context: !in_interrupt() + * ohci_hcd_sa1111_probe - initialize SA-1111-based HCDs * * Allocates basic resources for this USB host controller, and - * then invokes the start() method for the HCD associated with it - * through the hotplug entry's driver_data. - * - * Store this function in the HCD's struct pci_driver as probe(). + * then invokes the start() method for the HCD associated with it. */ -int usb_hcd_sa1111_probe (const struct hc_driver *driver, - struct sa1111_dev *dev) +static int ohci_hcd_sa1111_probe(struct sa1111_dev *dev) { struct usb_hcd *hcd; - int retval; + int ret; - hcd = usb_create_hcd (driver, &dev->dev, "sa1111"); + if (usb_disabled()) + return -ENODEV; + + hcd = usb_create_hcd(&ohci_sa1111_hc_driver, &dev->dev, "sa1111"); if (!hcd) return -ENOMEM; + hcd->rsrc_start = dev->res.start; hcd->rsrc_len = resource_size(&dev->res); if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { dbg("request_mem_region failed"); - retval = -EBUSY; + ret = -EBUSY; goto err1; } + hcd->regs = dev->mapbase; - sa1111_start_hc(dev); - ohci_hcd_init(hcd_to_ohci(hcd)); + ret = sa1111_start_hc(dev); + if (ret) + goto err2; - retval = usb_add_hcd(hcd, dev->irq[1], 0); - if (retval == 0) - return retval; + ret = usb_add_hcd(hcd, dev->irq[1], 0); + if (ret == 0) + return ret; sa1111_stop_hc(dev); + err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); err1: usb_put_hcd(hcd); - return retval; + return ret; } - -/* may be called without controller electrically present */ -/* may be called with controller, bus, and devices active */ - /** - * usb_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs + * ohci_hcd_sa1111_remove - shutdown processing for SA-1111-based HCDs * @dev: USB Host Controller being removed - * Context: !in_interrupt() - * - * Reverses the effect of usb_hcd_sa1111_probe(), first invoking - * the HCD's stop() method. It is always called from a thread - * context, normally "rmmod", "apmd", or something similar. * + * Reverses the effect of ohci_hcd_sa1111_probe(), first invoking + * the HCD's stop() method. */ -void usb_hcd_sa1111_remove (struct usb_hcd *hcd, struct sa1111_dev *dev) +static int ohci_hcd_sa1111_remove(struct sa1111_dev *dev) { + struct usb_hcd *hcd = sa1111_get_drvdata(dev); + usb_remove_hcd(hcd); sa1111_stop_hc(dev); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); usb_put_hcd(hcd); -} - -/*-------------------------------------------------------------------------*/ -static int __devinit -ohci_sa1111_start (struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci (hcd); - int ret; - - if ((ret = ohci_init(ohci)) < 0) - return ret; - - if ((ret = ohci_run (ohci)) < 0) { - err ("can't start %s", hcd->self.bus_name); - ohci_stop (hcd); - return ret; - } return 0; } -/*-------------------------------------------------------------------------*/ - -static const struct hc_driver ohci_sa1111_hc_driver = { - .description = hcd_name, - .product_desc = "SA-1111 OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_sa1111_start, - .stop = ohci_stop, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, -#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -#endif - .start_port_reset = ohci_start_port_reset, -}; - -/*-------------------------------------------------------------------------*/ - -static int ohci_hcd_sa1111_drv_probe(struct sa1111_dev *dev) -{ - int ret; - - if (usb_disabled()) - return -ENODEV; - - ret = usb_hcd_sa1111_probe(&ohci_sa1111_hc_driver, dev); - return ret; -} - -static int ohci_hcd_sa1111_drv_remove(struct sa1111_dev *dev) +static void ohci_hcd_sa1111_shutdown(struct sa1111_dev *dev) { struct usb_hcd *hcd = sa1111_get_drvdata(dev); - usb_hcd_sa1111_remove(hcd, dev); - return 0; + if (test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) { + hcd->driver->shutdown(hcd); + sa1111_stop_hc(dev); + } } static struct sa1111_driver ohci_hcd_sa1111_driver = { .drv = { .name = "sa1111-ohci", + .owner = THIS_MODULE, }, .devid = SA1111_DEVID_USB, - .probe = ohci_hcd_sa1111_drv_probe, - .remove = ohci_hcd_sa1111_drv_remove, + .probe = ohci_hcd_sa1111_probe, + .remove = ohci_hcd_sa1111_remove, + .shutdown = ohci_hcd_sa1111_shutdown, }; - diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c index 98d55d0e2da5..b6325848ad61 100644 --- a/drivers/video/sa1100fb.c +++ b/drivers/video/sa1100fb.c @@ -173,282 +173,48 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/cpufreq.h> +#include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/mutex.h> #include <linux/io.h> +#include <video/sa1100fb.h> + #include <mach/hardware.h> #include <asm/mach-types.h> -#include <mach/assabet.h> #include <mach/shannon.h> /* - * debugging? - */ -#define DEBUG 0 -/* * Complain if VAR is out of range. */ #define DEBUG_VAR 1 -#undef ASSABET_PAL_VIDEO - #include "sa1100fb.h" -extern void (*sa1100fb_backlight_power)(int on); -extern void (*sa1100fb_lcd_power)(int on); - -static struct sa1100fb_rgb rgb_4 = { +static const struct sa1100fb_rgb rgb_4 = { .red = { .offset = 0, .length = 4, }, .green = { .offset = 0, .length = 4, }, .blue = { .offset = 0, .length = 4, }, .transp = { .offset = 0, .length = 0, }, }; -static struct sa1100fb_rgb rgb_8 = { +static const struct sa1100fb_rgb rgb_8 = { .red = { .offset = 0, .length = 8, }, .green = { .offset = 0, .length = 8, }, .blue = { .offset = 0, .length = 8, }, .transp = { .offset = 0, .length = 0, }, }; -static struct sa1100fb_rgb def_rgb_16 = { +static const struct sa1100fb_rgb def_rgb_16 = { .red = { .offset = 11, .length = 5, }, .green = { .offset = 5, .length = 6, }, .blue = { .offset = 0, .length = 5, }, .transp = { .offset = 0, .length = 0, }, }; -#ifdef CONFIG_SA1100_ASSABET -#ifndef ASSABET_PAL_VIDEO -/* - * The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually - * takes an RGB666 signal, but we provide it with an RGB565 signal - * instead (def_rgb_16). - */ -static struct sa1100fb_mach_info lq039q2ds54_info __initdata = { - .pixclock = 171521, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 5, .vsync_len = 1, - .left_margin = 61, .upper_margin = 3, - .right_margin = 9, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#else -static struct sa1100fb_mach_info pal_info __initdata = { - .pixclock = 67797, .bpp = 16, - .xres = 640, .yres = 512, - - .hsync_len = 64, .vsync_len = 6, - .left_margin = 125, .upper_margin = 70, - .right_margin = 115, .lower_margin = 36, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), -}; -#endif -#endif - -#ifdef CONFIG_SA1100_H3600 -static struct sa1100fb_mach_info h3600_info __initdata = { - .pixclock = 174757, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 3, .vsync_len = 3, - .left_margin = 12, .upper_margin = 10, - .right_margin = 17, .lower_margin = 1, - - .cmap_static = 1, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; - -static struct sa1100fb_rgb h3600_rgb_16 = { - .red = { .offset = 12, .length = 4, }, - .green = { .offset = 7, .length = 4, }, - .blue = { .offset = 1, .length = 4, }, - .transp = { .offset = 0, .length = 0, }, -}; -#endif - -#ifdef CONFIG_SA1100_H3100 -static struct sa1100fb_mach_info h3100_info __initdata = { - .pixclock = 406977, .bpp = 4, - .xres = 320, .yres = 240, - - .hsync_len = 26, .vsync_len = 41, - .left_margin = 4, .upper_margin = 0, - .right_margin = 4, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - .cmap_greyscale = 1, - .cmap_inverse = 1, - - .lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#endif - -#ifdef CONFIG_SA1100_COLLIE -static struct sa1100fb_mach_info collie_info __initdata = { - .pixclock = 171521, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 5, .vsync_len = 1, - .left_margin = 11, .upper_margin = 2, - .right_margin = 30, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2), -}; -#endif - -#ifdef LART_GREY_LCD -static struct sa1100fb_mach_info lart_grey_info __initdata = { - .pixclock = 150000, .bpp = 4, - .xres = 320, .yres = 240, - - .hsync_len = 1, .vsync_len = 1, - .left_margin = 4, .upper_margin = 0, - .right_margin = 2, .lower_margin = 0, - - .cmap_greyscale = 1, - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono, - .lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512), -}; -#endif -#ifdef LART_COLOR_LCD -static struct sa1100fb_mach_info lart_color_info __initdata = { - .pixclock = 150000, .bpp = 16, - .xres = 320, .yres = 240, - - .hsync_len = 2, .vsync_len = 3, - .left_margin = 69, .upper_margin = 14, - .right_margin = 8, .lower_margin = 4, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), -}; -#endif -#ifdef LART_VIDEO_OUT -static struct sa1100fb_mach_info lart_video_info __initdata = { - .pixclock = 39721, .bpp = 16, - .xres = 640, .yres = 480, - - .hsync_len = 95, .vsync_len = 2, - .left_margin = 40, .upper_margin = 32, - .right_margin = 24, .lower_margin = 11, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512), -}; -#endif - -#ifdef LART_KIT01_LCD -static struct sa1100fb_mach_info lart_kit01_info __initdata = { - .pixclock = 63291, .bpp = 16, - .xres = 640, .yres = 480, - - .hsync_len = 64, .vsync_len = 3, - .left_margin = 122, .upper_margin = 45, - .right_margin = 10, .lower_margin = 10, - - .lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act, - .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg -}; -#endif - -#ifdef CONFIG_SA1100_SHANNON -static struct sa1100fb_mach_info shannon_info __initdata = { - .pixclock = 152500, .bpp = 8, - .xres = 640, .yres = 480, - - .hsync_len = 4, .vsync_len = 3, - .left_margin = 2, .upper_margin = 0, - .right_margin = 1, .lower_margin = 0, - - .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, - - .lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas, - .lccr3 = LCCR3_ACBsDiv(512), -}; -#endif - -static struct sa1100fb_mach_info * __init -sa1100fb_get_machine_info(struct sa1100fb_info *fbi) -{ - struct sa1100fb_mach_info *inf = NULL; - - /* - * R G B T - * default {11,5}, { 5,6}, { 0,5}, { 0,0} - * h3600 {12,4}, { 7,4}, { 1,4}, { 0,0} - * freebird { 8,4}, { 4,4}, { 0,4}, {12,4} - */ -#ifdef CONFIG_SA1100_ASSABET - if (machine_is_assabet()) { -#ifndef ASSABET_PAL_VIDEO - inf = &lq039q2ds54_info; -#else - inf = &pal_info; -#endif - } -#endif -#ifdef CONFIG_SA1100_H3100 - if (machine_is_h3100()) { - inf = &h3100_info; - } -#endif -#ifdef CONFIG_SA1100_H3600 - if (machine_is_h3600()) { - inf = &h3600_info; - fbi->rgb[RGB_16] = &h3600_rgb_16; - } -#endif -#ifdef CONFIG_SA1100_COLLIE - if (machine_is_collie()) { - inf = &collie_info; - } -#endif -#ifdef CONFIG_SA1100_LART - if (machine_is_lart()) { -#ifdef LART_GREY_LCD - inf = &lart_grey_info; -#endif -#ifdef LART_COLOR_LCD - inf = &lart_color_info; -#endif -#ifdef LART_VIDEO_OUT - inf = &lart_video_info; -#endif -#ifdef LART_KIT01_LCD - inf = &lart_kit01_info; -#endif - } -#endif -#ifdef CONFIG_SA1100_SHANNON - if (machine_is_shannon()) { - inf = &shannon_info; - } -#endif - return inf; -} - static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *); static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state); @@ -533,7 +299,7 @@ sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue, * is what you poke into the framebuffer to produce the * colour you requested. */ - if (fbi->cmap_inverse) { + if (fbi->inf->cmap_inverse) { red = 0xffff - red; green = 0xffff - green; blue = 0xffff - blue; @@ -607,14 +373,14 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->xres = MIN_XRES; if (var->yres < MIN_YRES) var->yres = MIN_YRES; - if (var->xres > fbi->max_xres) - var->xres = fbi->max_xres; - if (var->yres > fbi->max_yres) - var->yres = fbi->max_yres; + if (var->xres > fbi->inf->xres) + var->xres = fbi->inf->xres; + if (var->yres > fbi->inf->yres) + var->yres = fbi->inf->yres; var->xres_virtual = max(var->xres_virtual, var->xres); var->yres_virtual = max(var->yres_virtual, var->yres); - DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel); + dev_dbg(fbi->dev, "var->bits_per_pixel=%d\n", var->bits_per_pixel); switch (var->bits_per_pixel) { case 4: rgbidx = RGB_4; @@ -638,16 +404,16 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) var->blue = fbi->rgb[rgbidx]->blue; var->transp = fbi->rgb[rgbidx]->transp; - DPRINTK("RGBT length = %d:%d:%d:%d\n", + dev_dbg(fbi->dev, "RGBT length = %d:%d:%d:%d\n", var->red.length, var->green.length, var->blue.length, var->transp.length); - DPRINTK("RGBT offset = %d:%d:%d:%d\n", + dev_dbg(fbi->dev, "RGBT offset = %d:%d:%d:%d\n", var->red.offset, var->green.offset, var->blue.offset, var->transp.offset); #ifdef CONFIG_CPU_FREQ - printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n", + dev_dbg(fbi->dev, "dma period = %d ps, clock = %d kHz\n", sa1100fb_display_dma_period(var), cpufreq_get(smp_processor_id())); #endif @@ -655,22 +421,10 @@ sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info) return 0; } -static inline void sa1100fb_set_truecolor(u_int is_true_color) +static void sa1100fb_set_visual(struct sa1100fb_info *fbi, u32 visual) { - if (machine_is_assabet()) { -#if 1 // phase 4 or newer Assabet's - if (is_true_color) - ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); - else - ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); -#else - // older Assabet's - if (is_true_color) - ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB); - else - ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB); -#endif - } + if (fbi->inf->set_visual) + fbi->inf->set_visual(visual); } /* @@ -683,11 +437,11 @@ static int sa1100fb_set_par(struct fb_info *info) struct fb_var_screeninfo *var = &info->var; unsigned long palette_mem_size; - DPRINTK("set_par\n"); + dev_dbg(fbi->dev, "set_par\n"); if (var->bits_per_pixel == 16) fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR; - else if (!fbi->cmap_static) + else if (!fbi->inf->cmap_static) fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR; else { /* @@ -704,7 +458,7 @@ static int sa1100fb_set_par(struct fb_info *info) palette_mem_size = fbi->palette_size * sizeof(u16); - DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size); + dev_dbg(fbi->dev, "palette_mem_size = 0x%08lx\n", palette_mem_size); fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size); fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size; @@ -712,7 +466,7 @@ static int sa1100fb_set_par(struct fb_info *info) /* * Set (any) board control register to handle new color depth */ - sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR); + sa1100fb_set_visual(fbi, fbi->fb.fix.visual); sa1100fb_activate_var(var, fbi); return 0; @@ -728,7 +482,7 @@ sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con, /* * Make sure the user isn't doing something stupid. */ - if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static)) + if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->inf->cmap_static)) return -EINVAL; return gen_set_cmap(cmap, kspc, con, info); @@ -775,7 +529,7 @@ static int sa1100fb_blank(int blank, struct fb_info *info) struct sa1100fb_info *fbi = (struct sa1100fb_info *)info; int i; - DPRINTK("sa1100fb_blank: blank=%d\n", blank); + dev_dbg(fbi->dev, "sa1100fb_blank: blank=%d\n", blank); switch (blank) { case FB_BLANK_POWERDOWN: @@ -863,43 +617,43 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ u_int half_screen_size, yres, pcd; u_long flags; - DPRINTK("Configuring SA1100 LCD\n"); + dev_dbg(fbi->dev, "Configuring SA1100 LCD\n"); - DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n", + dev_dbg(fbi->dev, "var: xres=%d hslen=%d lm=%d rm=%d\n", var->xres, var->hsync_len, var->left_margin, var->right_margin); - DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n", + dev_dbg(fbi->dev, "var: yres=%d vslen=%d um=%d bm=%d\n", var->yres, var->vsync_len, var->upper_margin, var->lower_margin); #if DEBUG_VAR if (var->xres < 16 || var->xres > 1024) - printk(KERN_ERR "%s: invalid xres %d\n", + dev_err(fbi->dev, "%s: invalid xres %d\n", fbi->fb.fix.id, var->xres); if (var->hsync_len < 1 || var->hsync_len > 64) - printk(KERN_ERR "%s: invalid hsync_len %d\n", + dev_err(fbi->dev, "%s: invalid hsync_len %d\n", fbi->fb.fix.id, var->hsync_len); if (var->left_margin < 1 || var->left_margin > 255) - printk(KERN_ERR "%s: invalid left_margin %d\n", + dev_err(fbi->dev, "%s: invalid left_margin %d\n", fbi->fb.fix.id, var->left_margin); if (var->right_margin < 1 || var->right_margin > 255) - printk(KERN_ERR "%s: invalid right_margin %d\n", + dev_err(fbi->dev, "%s: invalid right_margin %d\n", fbi->fb.fix.id, var->right_margin); if (var->yres < 1 || var->yres > 1024) - printk(KERN_ERR "%s: invalid yres %d\n", + dev_err(fbi->dev, "%s: invalid yres %d\n", fbi->fb.fix.id, var->yres); if (var->vsync_len < 1 || var->vsync_len > 64) - printk(KERN_ERR "%s: invalid vsync_len %d\n", + dev_err(fbi->dev, "%s: invalid vsync_len %d\n", fbi->fb.fix.id, var->vsync_len); if (var->upper_margin < 0 || var->upper_margin > 255) - printk(KERN_ERR "%s: invalid upper_margin %d\n", + dev_err(fbi->dev, "%s: invalid upper_margin %d\n", fbi->fb.fix.id, var->upper_margin); if (var->lower_margin < 0 || var->lower_margin > 255) - printk(KERN_ERR "%s: invalid lower_margin %d\n", + dev_err(fbi->dev, "%s: invalid lower_margin %d\n", fbi->fb.fix.id, var->lower_margin); #endif - new_regs.lccr0 = fbi->lccr0 | + new_regs.lccr0 = fbi->inf->lccr0 | LCCR0_LEN | LCCR0_LDM | LCCR0_BAM | LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0); @@ -914,7 +668,7 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ * the YRES parameter. */ yres = var->yres; - if (fbi->lccr0 & LCCR0_Dual) + if (fbi->inf->lccr0 & LCCR0_Dual) yres /= 2; new_regs.lccr2 = @@ -924,14 +678,14 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ LCCR2_EndFrmDel(var->lower_margin); pcd = get_pcd(var->pixclock, cpufreq_get(0)); - new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 | + new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->inf->lccr3 | (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) | (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL); - DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0); - DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1); - DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2); - DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3); + dev_dbg(fbi->dev, "nlccr0 = 0x%08lx\n", new_regs.lccr0); + dev_dbg(fbi->dev, "nlccr1 = 0x%08lx\n", new_regs.lccr1); + dev_dbg(fbi->dev, "nlccr2 = 0x%08lx\n", new_regs.lccr2); + dev_dbg(fbi->dev, "nlccr3 = 0x%08lx\n", new_regs.lccr3); half_screen_size = var->bits_per_pixel; half_screen_size = half_screen_size * var->xres * var->yres / 16; @@ -951,9 +705,12 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ * Only update the registers if the controller is enabled * and something has changed. */ - if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) || - (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) || - (DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2)) + if (readl_relaxed(fbi->base + LCCR0) != fbi->reg_lccr0 || + readl_relaxed(fbi->base + LCCR1) != fbi->reg_lccr1 || + readl_relaxed(fbi->base + LCCR2) != fbi->reg_lccr2 || + readl_relaxed(fbi->base + LCCR3) != fbi->reg_lccr3 || + readl_relaxed(fbi->base + DBAR1) != fbi->dbar1 || + readl_relaxed(fbi->base + DBAR2) != fbi->dbar2) sa1100fb_schedule_work(fbi, C_REENABLE); return 0; @@ -967,18 +724,18 @@ static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_ */ static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on) { - DPRINTK("backlight o%s\n", on ? "n" : "ff"); + dev_dbg(fbi->dev, "backlight o%s\n", on ? "n" : "ff"); - if (sa1100fb_backlight_power) - sa1100fb_backlight_power(on); + if (fbi->inf->backlight_power) + fbi->inf->backlight_power(on); } static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on) { - DPRINTK("LCD power o%s\n", on ? "n" : "ff"); + dev_dbg(fbi->dev, "LCD power o%s\n", on ? "n" : "ff"); - if (sa1100fb_lcd_power) - sa1100fb_lcd_power(on); + if (fbi->inf->lcd_power) + fbi->inf->lcd_power(on); } static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) @@ -1008,14 +765,25 @@ static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi) } if (mask) { + unsigned long flags; + + /* + * SA-1100 requires the GPIO direction register set + * appropriately for the alternate function. Hence + * we set it here via bitmask rather than excessive + * fiddling via the GPIO subsystem - and even then + * we'll still have to deal with GAFR. + */ + local_irq_save(flags); GPDR |= mask; GAFR |= mask; + local_irq_restore(flags); } } static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) { - DPRINTK("Enabling LCD controller\n"); + dev_dbg(fbi->dev, "Enabling LCD controller\n"); /* * Make sure the mode bits are present in the first palette entry @@ -1024,43 +792,46 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var); /* Sequence from 11.7.10 */ - LCCR3 = fbi->reg_lccr3; - LCCR2 = fbi->reg_lccr2; - LCCR1 = fbi->reg_lccr1; - LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN; - DBAR1 = fbi->dbar1; - DBAR2 = fbi->dbar2; - LCCR0 |= LCCR0_LEN; - - if (machine_is_shannon()) { - GPDR |= SHANNON_GPIO_DISP_EN; - GPSR |= SHANNON_GPIO_DISP_EN; - } - - DPRINTK("DBAR1 = 0x%08x\n", DBAR1); - DPRINTK("DBAR2 = 0x%08x\n", DBAR2); - DPRINTK("LCCR0 = 0x%08x\n", LCCR0); - DPRINTK("LCCR1 = 0x%08x\n", LCCR1); - DPRINTK("LCCR2 = 0x%08x\n", LCCR2); - DPRINTK("LCCR3 = 0x%08x\n", LCCR3); + writel_relaxed(fbi->reg_lccr3, fbi->base + LCCR3); + writel_relaxed(fbi->reg_lccr2, fbi->base + LCCR2); + writel_relaxed(fbi->reg_lccr1, fbi->base + LCCR1); + writel_relaxed(fbi->reg_lccr0 & ~LCCR0_LEN, fbi->base + LCCR0); + writel_relaxed(fbi->dbar1, fbi->base + DBAR1); + writel_relaxed(fbi->dbar2, fbi->base + DBAR2); + writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0); + + if (machine_is_shannon()) + gpio_set_value(SHANNON_GPIO_DISP_EN, 1); + + dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1)); + dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2)); + dev_dbg(fbi->dev, "LCCR0: 0x%08x\n", readl_relaxed(fbi->base + LCCR0)); + dev_dbg(fbi->dev, "LCCR1: 0x%08x\n", readl_relaxed(fbi->base + LCCR1)); + dev_dbg(fbi->dev, "LCCR2: 0x%08x\n", readl_relaxed(fbi->base + LCCR2)); + dev_dbg(fbi->dev, "LCCR3: 0x%08x\n", readl_relaxed(fbi->base + LCCR3)); } static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) { DECLARE_WAITQUEUE(wait, current); + u32 lccr0; - DPRINTK("Disabling LCD controller\n"); + dev_dbg(fbi->dev, "Disabling LCD controller\n"); - if (machine_is_shannon()) { - GPCR |= SHANNON_GPIO_DISP_EN; - } + if (machine_is_shannon()) + gpio_set_value(SHANNON_GPIO_DISP_EN, 0); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&fbi->ctrlr_wait, &wait); - LCSR = 0xffffffff; /* Clear LCD Status Register */ - LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ - LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */ + /* Clear LCD Status Register */ + writel_relaxed(~0, fbi->base + LCSR); + + lccr0 = readl_relaxed(fbi->base + LCCR0); + lccr0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */ + writel_relaxed(lccr0, fbi->base + LCCR0); + lccr0 &= ~LCCR0_LEN; /* Disable LCD Controller */ + writel_relaxed(lccr0, fbi->base + LCCR0); schedule_timeout(20 * HZ / 1000); remove_wait_queue(&fbi->ctrlr_wait, &wait); @@ -1072,14 +843,15 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id) { struct sa1100fb_info *fbi = dev_id; - unsigned int lcsr = LCSR; + unsigned int lcsr = readl_relaxed(fbi->base + LCSR); if (lcsr & LCSR_LDD) { - LCCR0 |= LCCR0_LDM; + u32 lccr0 = readl_relaxed(fbi->base + LCCR0) | LCCR0_LDM; + writel_relaxed(lccr0, fbi->base + LCCR0); wake_up(&fbi->ctrlr_wait); } - LCSR = lcsr; + writel_relaxed(lcsr, fbi->base + LCSR); return IRQ_HANDLED; } @@ -1268,7 +1040,7 @@ sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val, switch (val) { case CPUFREQ_ADJUST: case CPUFREQ_INCOMPATIBLE: - printk(KERN_DEBUG "min dma period: %d ps, " + dev_dbg(fbi->dev, "min dma period: %d ps, " "new clock %d kHz\n", sa1100fb_min_dma_period(fbi), policy->max); /* todo: fill in min/max values */ @@ -1318,7 +1090,7 @@ static int sa1100fb_resume(struct platform_device *dev) * cache. Once this area is remapped, all virtual memory * access to the video memory should occur at the new region. */ -static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi) +static int __devinit sa1100fb_map_video_memory(struct sa1100fb_info *fbi) { /* * We reserve one page for the palette, plus the size @@ -1344,7 +1116,7 @@ static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi) } /* Fake monspecs to fill in fbinfo structure */ -static struct fb_monspecs monspecs __initdata = { +static struct fb_monspecs monspecs __devinitdata = { .hfmin = 30000, .hfmax = 70000, .vfmin = 50, @@ -1352,10 +1124,11 @@ static struct fb_monspecs monspecs __initdata = { }; -static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) +static struct sa1100fb_info * __devinit sa1100fb_init_fbinfo(struct device *dev) { - struct sa1100fb_mach_info *inf; + struct sa1100fb_mach_info *inf = dev->platform_data; struct sa1100fb_info *fbi; + unsigned i; fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16, GFP_KERNEL); @@ -1390,8 +1163,6 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) fbi->rgb[RGB_8] = &rgb_8; fbi->rgb[RGB_16] = &def_rgb_16; - inf = sa1100fb_get_machine_info(fbi); - /* * People just don't seem to get this. We don't support * anything but correct entries now, so panic if someone @@ -1402,13 +1173,10 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) panic("sa1100fb error: invalid LCCR3 fields set or zero " "pixclock."); - fbi->max_xres = inf->xres; fbi->fb.var.xres = inf->xres; fbi->fb.var.xres_virtual = inf->xres; - fbi->max_yres = inf->yres; fbi->fb.var.yres = inf->yres; fbi->fb.var.yres_virtual = inf->yres; - fbi->max_bpp = inf->bpp; fbi->fb.var.bits_per_pixel = inf->bpp; fbi->fb.var.pixclock = inf->pixclock; fbi->fb.var.hsync_len = inf->hsync_len; @@ -1419,14 +1187,16 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) fbi->fb.var.lower_margin = inf->lower_margin; fbi->fb.var.sync = inf->sync; fbi->fb.var.grayscale = inf->cmap_greyscale; - fbi->cmap_inverse = inf->cmap_inverse; - fbi->cmap_static = inf->cmap_static; - fbi->lccr0 = inf->lccr0; - fbi->lccr3 = inf->lccr3; fbi->state = C_STARTUP; fbi->task_state = (u_char)-1; - fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres * - fbi->max_bpp / 8; + fbi->fb.fix.smem_len = inf->xres * inf->yres * + inf->bpp / 8; + fbi->inf = inf; + + /* Copy the RGB bitfield overrides */ + for (i = 0; i < NR_RGB; i++) + if (inf->rgb[i]) + fbi->rgb[i] = inf->rgb[i]; init_waitqueue_head(&fbi->ctrlr_wait); INIT_WORK(&fbi->task, sa1100fb_task); @@ -1438,13 +1208,20 @@ static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev) static int __devinit sa1100fb_probe(struct platform_device *pdev) { struct sa1100fb_info *fbi; + struct resource *res; int ret, irq; + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "no platform LCD data\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (irq < 0) + if (irq < 0 || !res) return -EINVAL; - if (!request_mem_region(0xb0100000, 0x10000, "LCD")) + if (!request_mem_region(res->start, resource_size(res), "LCD")) return -EBUSY; fbi = sa1100fb_init_fbinfo(&pdev->dev); @@ -1452,6 +1229,10 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) if (!fbi) goto failed; + fbi->base = ioremap(res->start, resource_size(res)); + if (!fbi->base) + goto failed; + /* Initialize video memory */ ret = sa1100fb_map_video_memory(fbi); if (ret) @@ -1459,14 +1240,16 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) ret = request_irq(irq, sa1100fb_handle_irq, 0, "LCD", fbi); if (ret) { - printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret); + dev_err(&pdev->dev, "request_irq failed: %d\n", ret); goto failed; } -#ifdef ASSABET_PAL_VIDEO - if (machine_is_assabet()) - ASSABET_BCR_clear(ASSABET_BCR_LCD_ON); -#endif + if (machine_is_shannon()) { + ret = gpio_request_one(SHANNON_GPIO_DISP_EN, + GPIOF_OUT_INIT_LOW, "display enable"); + if (ret) + goto err_free_irq; + } /* * This makes sure that our colour bitfield @@ -1478,7 +1261,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) ret = register_framebuffer(&fbi->fb); if (ret < 0) - goto err_free_irq; + goto err_reg_fb; #ifdef CONFIG_CPU_FREQ fbi->freq_transition.notifier_call = sa1100fb_freq_transition; @@ -1490,12 +1273,17 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev) /* This driver cannot be unloaded at the moment */ return 0; + err_reg_fb: + if (machine_is_shannon()) + gpio_free(SHANNON_GPIO_DISP_EN); err_free_irq: free_irq(irq, fbi); failed: + if (fbi) + iounmap(fbi->base); platform_set_drvdata(pdev, NULL); kfree(fbi); - release_mem_region(0xb0100000, 0x10000); + release_mem_region(res->start, resource_size(res)); return ret; } @@ -1505,6 +1293,7 @@ static struct platform_driver sa1100fb_driver = { .resume = sa1100fb_resume, .driver = { .name = "sa11x0-fb", + .owner = THIS_MODULE, }, }; diff --git a/drivers/video/sa1100fb.h b/drivers/video/sa1100fb.h index 1c3b459865d8..fc5d4292fad6 100644 --- a/drivers/video/sa1100fb.h +++ b/drivers/video/sa1100fb.h @@ -10,44 +10,15 @@ * for more details. */ -/* - * These are the bitfields for each - * display depth that we support. - */ -struct sa1100fb_rgb { - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; -}; - -/* - * This structure describes the machine which we are running on. - */ -struct sa1100fb_mach_info { - u_long pixclock; - - u_short xres; - u_short yres; - - u_char bpp; - u_char hsync_len; - u_char left_margin; - u_char right_margin; - - u_char vsync_len; - u_char upper_margin; - u_char lower_margin; - u_char sync; - - u_int cmap_greyscale:1, - cmap_inverse:1, - cmap_static:1, - unused:29; - - u_int lccr0; - u_int lccr3; -}; +#define LCCR0 0x0000 /* LCD Control Reg. 0 */ +#define LCSR 0x0004 /* LCD Status Reg. */ +#define DBAR1 0x0010 /* LCD DMA Base Address Reg. channel 1 */ +#define DCAR1 0x0014 /* LCD DMA Current Address Reg. channel 1 */ +#define DBAR2 0x0018 /* LCD DMA Base Address Reg. channel 2 */ +#define DCAR2 0x001C /* LCD DMA Current Address Reg. channel 2 */ +#define LCCR1 0x0020 /* LCD Control Reg. 1 */ +#define LCCR2 0x0024 /* LCD Control Reg. 2 */ +#define LCCR3 0x0028 /* LCD Control Reg. 3 */ /* Shadows for LCD controller registers */ struct sa1100fb_lcd_reg { @@ -57,19 +28,11 @@ struct sa1100fb_lcd_reg { unsigned long lccr3; }; -#define RGB_4 (0) -#define RGB_8 (1) -#define RGB_16 (2) -#define NR_RGB 3 - struct sa1100fb_info { struct fb_info fb; struct device *dev; - struct sa1100fb_rgb *rgb[NR_RGB]; - - u_int max_bpp; - u_int max_xres; - u_int max_yres; + const struct sa1100fb_rgb *rgb[NR_RGB]; + void __iomem *base; /* * These are the addresses we mapped @@ -88,12 +51,6 @@ struct sa1100fb_info { dma_addr_t dbar1; dma_addr_t dbar2; - u_int lccr0; - u_int lccr3; - u_int cmap_inverse:1, - cmap_static:1, - unused:30; - u_int reg_lccr0; u_int reg_lccr1; u_int reg_lccr2; @@ -109,6 +66,8 @@ struct sa1100fb_info { struct notifier_block freq_transition; struct notifier_block freq_policy; #endif + + const struct sa1100fb_mach_info *inf; }; #define TO_INF(ptr,member) container_of(ptr,struct sa1100fb_info,member) @@ -130,15 +89,6 @@ struct sa1100fb_info { #define SA1100_NAME "SA1100" /* - * Debug macros - */ -#if DEBUG -# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__ , ## args) -#else -# define DPRINTK(fmt, args...) -#endif - -/* * Minimum X and Y resolutions */ #define MIN_XRES 64 |