summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/input/misc/twl6040-vibra.c21
-rw-r--r--drivers/mfd/twl6040-core.c67
-rw-r--r--drivers/mfd/wm8994-core.c27
-rw-r--r--drivers/regulator/core.c64
-rw-r--r--drivers/regulator/wm8994-regulator.c13
5 files changed, 161 insertions, 31 deletions
diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c
index 23855e12a30b..ad153a417eed 100644
--- a/drivers/input/misc/twl6040-vibra.c
+++ b/drivers/input/misc/twl6040-vibra.c
@@ -74,12 +74,12 @@ static irqreturn_t twl6040_vib_irq_handler(int irq, void *data)
if (status & TWL6040_VIBLOCDET) {
dev_warn(info->dev, "Left Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL);
+ TWL6040_VIBENA);
}
if (status & TWL6040_VIBROCDET) {
dev_warn(info->dev, "Right Vibrator overcurrent detected\n");
twl6040_clear_bits(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR);
+ TWL6040_VIBENA);
}
return IRQ_HANDLED;
@@ -97,23 +97,23 @@ static void twl6040_vibra_enable(struct vibra_info *info)
}
twl6040_power(info->twl6040, 1);
- if (twl6040->rev <= TWL6040_REV_ES1_1) {
+ if (twl6040_get_revid(twl6040) <= TWL6040_REV_ES1_1) {
/*
* ERRATA: Disable overcurrent protection for at least
* 3ms when enabling vibrator drivers to avoid false
* overcurrent detection
*/
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL | TWL6040_VIBCTRLL);
+ TWL6040_VIBENA | TWL6040_VIBCTRL);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR | TWL6040_VIBCTRLR);
+ TWL6040_VIBENA | TWL6040_VIBCTRL);
usleep_range(3000, 3500);
}
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLL,
- TWL6040_VIBENAL);
+ TWL6040_VIBENA);
twl6040_reg_write(twl6040, TWL6040_REG_VIBCTLR,
- TWL6040_VIBENAR);
+ TWL6040_VIBENA);
info->enabled = true;
}
@@ -201,6 +201,13 @@ static int vibra_play(struct input_dev *input, void *data,
struct vibra_info *info = input_get_drvdata(input);
int ret;
+ /* Do not allow effect, while the routing is set to use audio */
+ ret = twl6040_get_vibralr_status(info->twl6040);
+ if (ret & TWL6040_VIBSEL) {
+ dev_info(&input->dev, "Vibra is configured for audio\n");
+ return -EBUSY;
+ }
+
info->weak_speed = effect->u.rumble.weak_magnitude;
info->strong_speed = effect->u.rumble.strong_magnitude;
info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1;
diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c
index 24d436c2fe4a..268f80fd0439 100644
--- a/drivers/mfd/twl6040-core.c
+++ b/drivers/mfd/twl6040-core.c
@@ -34,7 +34,7 @@
#include <linux/mfd/core.h>
#include <linux/mfd/twl6040.h>
-static struct platform_device *twl6040_dev;
+#define VIBRACTRL_MEMBER(reg) ((reg == TWL6040_REG_VIBCTLL) ? 0 : 1)
int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
{
@@ -42,10 +42,16 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg)
u8 val = 0;
mutex_lock(&twl6040->io_mutex);
- ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
- if (ret < 0) {
- mutex_unlock(&twl6040->io_mutex);
- return ret;
+ /* Vibra control registers from cache */
+ if (unlikely(reg == TWL6040_REG_VIBCTLL ||
+ reg == TWL6040_REG_VIBCTLR)) {
+ val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)];
+ } else {
+ ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg);
+ if (ret < 0) {
+ mutex_unlock(&twl6040->io_mutex);
+ return ret;
+ }
}
mutex_unlock(&twl6040->io_mutex);
@@ -59,6 +65,9 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val)
mutex_lock(&twl6040->io_mutex);
ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg);
+ /* Cache the vibra control registers */
+ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR)
+ twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val;
mutex_unlock(&twl6040->io_mutex);
return ret;
@@ -203,11 +212,11 @@ static irqreturn_t twl6040_naudint_handler(int irq, void *data)
if (intid & TWL6040_THINT) {
status = twl6040_reg_read(twl6040, TWL6040_REG_STATUS);
if (status & TWL6040_TSHUTDET) {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Thermal shutdown, powering-off");
twl6040_power(twl6040, 0);
} else {
- dev_warn(&twl6040_dev->dev,
+ dev_warn(twl6040->dev,
"Leaving thermal shutdown, powering-on");
twl6040_power(twl6040, 1);
}
@@ -227,7 +236,7 @@ static int twl6040_power_up_completion(struct twl6040 *twl6040,
if (!time_left) {
intid = twl6040_reg_read(twl6040, TWL6040_REG_INTID);
if (!(intid & TWL6040_READYINT)) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"timeout waiting for READYINT\n");
return -ETIMEDOUT;
}
@@ -255,7 +264,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
/* wait for power-up completion */
ret = twl6040_power_up_completion(twl6040, naudint);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"automatic power-down failed\n");
twl6040->power_count = 0;
goto out;
@@ -264,7 +273,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
/* use manual power-up sequence */
ret = twl6040_power_up(twl6040);
if (ret) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"manual power-up failed\n");
twl6040->power_count = 0;
goto out;
@@ -276,7 +285,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
} else {
/* already powered-down */
if (!twl6040->power_count) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"device is already powered-off\n");
ret = -EPERM;
goto out;
@@ -326,7 +335,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
lppllctl &= ~TWL6040_LPLLFIN;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
@@ -347,7 +356,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
hppllctl);
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
@@ -356,7 +365,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
case TWL6040_SYSCLK_SEL_HPPLL:
/* high-performance PLL can provide only 19.2 MHz */
if (freq_out != 19200000) {
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_out %d not supported\n", freq_out);
ret = -EINVAL;
goto pll_out;
@@ -389,7 +398,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
TWL6040_HPLLENA;
break;
default:
- dev_err(&twl6040_dev->dev,
+ dev_err(twl6040->dev,
"freq_in %d not supported\n", freq_in);
ret = -EINVAL;
goto pll_out;
@@ -406,7 +415,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
break;
default:
- dev_err(&twl6040_dev->dev, "unknown pll id %d\n", pll_id);
+ dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
ret = -EINVAL;
goto pll_out;
}
@@ -435,6 +444,18 @@ unsigned int twl6040_get_sysclk(struct twl6040 *twl6040)
}
EXPORT_SYMBOL(twl6040_get_sysclk);
+/* Get the combined status of the vibra control register */
+int twl6040_get_vibralr_status(struct twl6040 *twl6040)
+{
+ u8 status;
+
+ status = twl6040->vibra_ctrl_cache[0] | twl6040->vibra_ctrl_cache[1];
+ status &= (TWL6040_VIBENA | TWL6040_VIBSEL);
+
+ return status;
+}
+EXPORT_SYMBOL(twl6040_get_vibralr_status);
+
static struct resource twl6040_vibra_rsrc[] = {
{
.flags = IORESOURCE_IRQ,
@@ -471,9 +492,7 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, twl6040);
- twl6040_dev = pdev;
twl6040->dev = &pdev->dev;
- twl6040->audpwron = pdata->audpwron_gpio;
twl6040->irq = pdata->naudint_irq;
twl6040->irq_base = pdata->irq_base;
@@ -483,6 +502,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
twl6040->rev = twl6040_reg_read(twl6040, TWL6040_REG_ASICREV);
+ /* ERRATA: Automatic power-up is not possible in ES1.0 */
+ if (twl6040_get_revid(twl6040) > TWL6040_REV_ES1_0)
+ twl6040->audpwron = pdata->audpwron_gpio;
+ else
+ twl6040->audpwron = -EINVAL;
+
if (gpio_is_valid(twl6040->audpwron)) {
ret = gpio_request(twl6040->audpwron, "audpwron");
if (ret)
@@ -493,10 +518,6 @@ static int __devinit twl6040_probe(struct platform_device *pdev)
goto gpio2_err;
}
- /* ERRATA: Automatic power-up is not possible in ES1.0 */
- if (twl6040->rev == TWL6040_REV_ES1_0)
- twl6040->audpwron = -EINVAL;
-
/* codec interrupt */
ret = twl6040_irq_init(twl6040);
if (ret)
@@ -566,7 +587,6 @@ gpio2_err:
gpio1_err:
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return ret;
}
@@ -586,7 +606,6 @@ static int __devexit twl6040_remove(struct platform_device *pdev)
mfd_remove_devices(&pdev->dev);
platform_set_drvdata(pdev, NULL);
kfree(twl6040);
- twl6040_dev = NULL;
return 0;
}
diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index bfde4e8ec638..b03be1d4e0ca 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -167,6 +167,18 @@ static struct mfd_cell wm8994_devs[] = {
* and should be handled via the standard regulator API supply
* management.
*/
+static const char *wm1811_main_supplies[] = {
+ "DBVDD1",
+ "DBVDD2",
+ "DBVDD3",
+ "DCVDD",
+ "AVDD1",
+ "AVDD2",
+ "CPVDD",
+ "SPKVDD1",
+ "SPKVDD2",
+};
+
static const char *wm8994_main_supplies[] = {
"DBVDD",
"DCVDD",
@@ -329,6 +341,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
}
switch (wm8994->type) {
+ case WM1811:
+ wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
+ break;
case WM8994:
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
break;
@@ -349,6 +364,10 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
}
switch (wm8994->type) {
+ case WM1811:
+ for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
+ wm8994->supplies[i].supply = wm1811_main_supplies[i];
+ break;
case WM8994:
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
wm8994->supplies[i].supply = wm8994_main_supplies[i];
@@ -382,6 +401,13 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
goto err_enable;
}
switch (ret) {
+ case 0x1811:
+ devname = "WM1811";
+ if (wm8994->type != WM1811)
+ dev_warn(wm8994->dev, "Device registered as type %d\n",
+ wm8994->type);
+ wm8994->type = WM1811;
+ break;
case 0x8994:
devname = "WM8994";
if (wm8994->type != WM8994)
@@ -539,6 +565,7 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
}
static const struct i2c_device_id wm8994_i2c_id[] = {
+ { "wm1811", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index d8e6a429e8ba..9e4c123c4028 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1552,6 +1552,68 @@ int regulator_force_disable(struct regulator *regulator)
}
EXPORT_SYMBOL_GPL(regulator_force_disable);
+static void regulator_disable_work(struct work_struct *work)
+{
+ struct regulator_dev *rdev = container_of(work, struct regulator_dev,
+ disable_work.work);
+ int count, i, ret;
+
+ mutex_lock(&rdev->mutex);
+
+ BUG_ON(!rdev->deferred_disables);
+
+ count = rdev->deferred_disables;
+ rdev->deferred_disables = 0;
+
+ for (i = 0; i < count; i++) {
+ ret = _regulator_disable(rdev);
+ if (ret != 0)
+ rdev_err(rdev, "Deferred disable failed: %d\n", ret);
+ }
+
+ mutex_unlock(&rdev->mutex);
+
+ if (rdev->supply) {
+ for (i = 0; i < count; i++) {
+ ret = regulator_disable(rdev->supply);
+ if (ret != 0) {
+ rdev_err(rdev,
+ "Supply disable failed: %d\n", ret);
+ }
+ }
+ }
+}
+
+/**
+ * regulator_disable_deferred - disable regulator output with delay
+ * @regulator: regulator source
+ * @ms: miliseconds until the regulator is disabled
+ *
+ * Execute regulator_disable() on the regulator after a delay. This
+ * is intended for use with devices that require some time to quiesce.
+ *
+ * NOTE: this will only disable the regulator output if no other consumer
+ * devices have it enabled, the regulator device supports disabling and
+ * machine constraints permit this operation.
+ */
+int regulator_disable_deferred(struct regulator *regulator, int ms)
+{
+ struct regulator_dev *rdev = regulator->rdev;
+ int ret;
+
+ mutex_lock(&rdev->mutex);
+ rdev->deferred_disables++;
+ mutex_unlock(&rdev->mutex);
+
+ ret = schedule_delayed_work(&rdev->disable_work,
+ msecs_to_jiffies(ms));
+ if (ret < 0)
+ return ret;
+ else
+ return 0;
+}
+EXPORT_SYMBOL_GPL(regulator_disable_deferred);
+
static int _regulator_is_enabled(struct regulator_dev *rdev)
{
/* If we don't know then assume that the regulator is always on */
@@ -2622,6 +2684,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
INIT_LIST_HEAD(&rdev->consumer_list);
INIT_LIST_HEAD(&rdev->list);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+ INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
/* preform any regulator specific init */
if (init_data->regulator_init) {
@@ -2729,6 +2792,7 @@ void regulator_unregister(struct regulator_dev *rdev)
#ifdef CONFIG_DEBUG_FS
debugfs_remove_recursive(rdev->debugfs);
#endif
+ flush_work_sync(&rdev->disable_work.work);
WARN_ON(rdev->open_count);
unset_regulator_supplies(rdev);
list_del(&rdev->list);
diff --git a/drivers/regulator/wm8994-regulator.c b/drivers/regulator/wm8994-regulator.c
index 1a6a690f24db..b87bf5c841f8 100644
--- a/drivers/regulator/wm8994-regulator.c
+++ b/drivers/regulator/wm8994-regulator.c
@@ -140,6 +140,14 @@ static int wm8994_ldo2_list_voltage(struct regulator_dev *rdev,
return (selector * 100000) + 900000;
case WM8958:
return (selector * 100000) + 1000000;
+ case WM1811:
+ switch (selector) {
+ case 0:
+ return -EINVAL;
+ default:
+ return (selector * 100000) + 950000;
+ }
+ break;
default:
return -EINVAL;
}
@@ -170,6 +178,11 @@ static int wm8994_ldo2_set_voltage(struct regulator_dev *rdev,
case WM8958:
selector = (min_uV - 1000000) / 100000;
break;
+ case WM1811:
+ selector = (min_uV - 950000) / 100000;
+ if (selector == 0)
+ selector = 1;
+ break;
default:
return -EINVAL;
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 13:23:09 +0000