summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/isdn/i4l/isdn_net.c6
-rw-r--r--drivers/net/atl1e/atl1e_hw.c4
-rw-r--r--drivers/net/atlx/atl1.c17
-rw-r--r--drivers/net/e100.c20
-rw-r--r--drivers/net/e1000/e1000_ethtool.c8
-rw-r--r--drivers/net/e1000/e1000_main.c1
-rw-r--r--drivers/net/e1000e/e1000.h5
-rw-r--r--drivers/net/e1000e/ethtool.c8
-rw-r--r--drivers/net/e1000e/netdev.c25
-rw-r--r--drivers/net/e1000e/param.c25
-rw-r--r--drivers/net/gianfar.c15
-rw-r--r--drivers/net/igb/igb_ethtool.c8
-rw-r--r--drivers/net/igb/igb_main.c8
-rw-r--r--drivers/net/mlx4/en_netdev.c8
-rw-r--r--drivers/net/mlx4/en_params.c30
-rw-r--r--drivers/net/mlx4/mlx4_en.h8
-rw-r--r--drivers/net/niu.c290
-rw-r--r--drivers/net/niu.h13
-rw-r--r--drivers/net/phy/marvell.c66
-rw-r--r--drivers/net/phy/mdio_bus.c2
-rw-r--r--drivers/net/phy/phy_device.c4
-rw-r--r--drivers/net/qla3xxx.c19
-rw-r--r--drivers/net/ucc_geth_ethtool.c6
-rw-r--r--drivers/net/via-velocity.c2
24 files changed, 498 insertions, 100 deletions
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index bb904a0a98bd..1bfc55d7a26c 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp)
/* slarp reply, send own ip/netmask; if values are nonsense remote
* should think we are unable to provide it with an address via SLARP */
p += put_u32(p, CISCO_SLARP_REPLY);
- p += put_u32(p, addr); // address
- p += put_u32(p, mask); // netmask
+ *(__be32 *)p = addr; // address
+ p += 4;
+ *(__be32 *)p = mask; // netmask
+ p += 4;
p += put_u16(p, 0); // unused
isdn_net_write_super(lp, skb);
diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c
index 8cbc1b59bd62..4a7700620119 100644
--- a/drivers/net/atl1e/atl1e_hw.c
+++ b/drivers/net/atl1e/atl1e_hw.c
@@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw)
* atl1e_hash_mc_addr
* purpose
* set hash value for a multicast address
- * hash calcu processing :
- * 1. calcu 32bit CRC for multicast address
- * 2. reverse crc with MSB to LSB
*/
u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
{
@@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr)
int i;
crc32 = ether_crc_le(6, mc_addr);
- crc32 = ~crc32;
for (i = 0; i < 32; i++)
value |= (((crc32 >> i) & 1) << (31 - i));
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 246d92b42636..aef403d299ee 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev,
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC;
+ wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
- if (adapter->wol & ATLX_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & ATLX_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & ATLX_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
if (adapter->wol & ATLX_WUFC_MAG)
wol->wolopts |= WAKE_MAGIC;
return;
@@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev,
{
struct atl1_adapter *adapter = netdev_priv(netdev);
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+ WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
adapter->wol = 0;
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= ATLX_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= ATLX_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= ATLX_WUFC_BC;
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= ATLX_WUFC_MAG;
return 0;
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index 3d69fae781cf..e8bfcce6b319 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -166,7 +166,7 @@
#define DRV_NAME "e100"
#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.5.23-k4"DRV_EXT
+#define DRV_VERSION "3.5.23-k6"DRV_EXT
#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
#define PFX DRV_NAME ": "
@@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
- sizeof(struct rfd), PCI_DMA_TODEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
}
return 0;
@@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
/* Need to sync before taking a peek at cb_complete bit */
pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_FROMDEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
rfd_status = le16_to_cpu(rfd->status);
DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status);
@@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx,
/* Get data */
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
/* If this buffer has the el bit, but we think the receiver
* is still running, check to see if it really stopped while
@@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
new_before_last_rfd->command |= cpu_to_le16(cb_el);
pci_dma_sync_single_for_device(nic->pdev,
new_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
/* Now that we have a new stopping point, we can clear the old
* stopping point. We must sync twice to get the proper
@@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
pci_dma_sync_single_for_device(nic->pdev,
old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
pci_dma_sync_single_for_device(nic->pdev,
old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_TODEVICE);
+ PCI_DMA_BIDIRECTIONAL);
}
if(restart_required) {
@@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic)
for(rx = nic->rxs, i = 0; i < count; rx++, i++) {
if(rx->skb) {
pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
dev_kfree_skb(rx->skb);
}
}
@@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic)
before_last->command |= cpu_to_le16(cb_el);
before_last->size = 0;
pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_TODEVICE);
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
nic->rx_to_use = nic->rx_to_clean = nic->rxs;
nic->ru_running = RU_SUSPENDED;
@@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
msleep(10);
pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
- RFD_BUF_LEN, PCI_DMA_FROMDEVICE);
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
skb->data, ETH_DATA_LEN))
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 6a3893acfe04..c854c96f5ab3 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev,
/* this function will set ->supported = 0 and return 1 if wol is not
* supported by this hardware */
- if (e1000_wol_exclusion(adapter, wol))
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
/* apply any specific unsupported masks here */
@@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (e1000_wol_exclusion(adapter, wol))
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
switch (hw->device_id) {
@@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= E1000_WUFC_MAG;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index fac82152e4c8..872799b746f5 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* print bus type/speed/width info */
DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index c55de1c027af..c55fd6fdb91c 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -299,6 +299,7 @@ struct e1000_adapter {
unsigned long led_status;
unsigned int flags;
+ unsigned int flags2;
struct work_struct downshift_task;
struct work_struct update_phy_task;
};
@@ -306,6 +307,7 @@ struct e1000_adapter {
struct e1000_info {
enum e1000_mac_type mac;
unsigned int flags;
+ unsigned int flags2;
u32 pba;
s32 (*get_variants)(struct e1000_adapter *);
struct e1000_mac_operations *mac_ops;
@@ -347,6 +349,9 @@ struct e1000_info {
#define FLAG_RX_RESTART_NOW (1 << 30)
#define FLAG_MSI_TEST_FAILED (1 << 31)
+/* CRC Stripping defines */
+#define FLAG2_CRC_STRIPPING (1 << 0)
+
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 70c11c811a08..62421ce96311 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev,
wol->supported = 0;
wol->wolopts = 0;
- if (!(adapter->flags & FLAG_HAS_WOL))
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
wol->supported = WAKE_UCAST | WAKE_MCAST |
@@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev,
if (wol->wolopts & WAKE_MAGICSECURE)
return -EOPNOTSUPP;
- if (!(adapter->flags & FLAG_HAS_WOL))
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
/* these settings will always override what we currently have */
@@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev,
if (wol->wolopts & WAKE_ARP)
adapter->wol |= E1000_WUFC_ARP;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index abd492b7336d..91795f78c3e4 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
goto next_desc;
}
+ /* adjust length to remove Ethernet CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ length -= 4;
+
total_rx_bytes += length;
total_rx_packets++;
@@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
pci_dma_sync_single_for_device(pdev, ps_page->dma,
PAGE_SIZE, PCI_DMA_FROMDEVICE);
+ /* remove the CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ l1 -= 4;
+
skb_put(skb, l1);
goto copydone;
} /* if */
@@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
skb->truesize += length;
}
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive
+ */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ pskb_trim(skb, skb->len - 4);
+
copydone:
total_rx_bytes += skb->len;
total_rx_packets++;
@@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter)
else
rctl |= E1000_RCTL_LPE;
- /* Enable hardware CRC frame stripping */
- rctl |= E1000_RCTL_SECRC;
+ /* Some systems expect that the CRC is included in SMBUS traffic. The
+ * hardware strips the CRC before sending to both SMBUS (BMC) and to
+ * host memory when this is enabled
+ */
+ if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+ rctl |= E1000_RCTL_SECRC;
/* Setup buffer sizes */
rctl &= ~E1000_RCTL_SZ_4096;
@@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
adapter->ei = ei;
adapter->pba = ei->pba;
adapter->flags = ei->flags;
+ adapter->flags2 = ei->flags2;
adapter->hw.adapter = adapter;
adapter->hw.mac.type = ei->mac;
adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
@@ -4970,6 +4989,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* reset the hardware with the new settings */
e1000e_reset(adapter);
@@ -5008,6 +5028,7 @@ err_hw_init:
err_sw_init:
if (adapter->hw.flash_address)
iounmap(adapter->hw.flash_address);
+ e1000e_reset_interrupt_capability(adapter);
err_flashmap:
iounmap(adapter->hw.hw_addr);
err_ioremap:
diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c
index 77a3d7207a5f..e909f96698e8 100644
--- a/drivers/net/e1000e/param.c
+++ b/drivers/net/e1000e/param.c
@@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
*/
E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+/*
+ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
+ "the CRC");
+
struct e1000_option {
enum { enable_option, range_option, list_option } type;
const char *name;
@@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter)
adapter->flags |= FLAG_SMART_POWER_DOWN;
}
}
+ { /* CRC Stripping */
+ const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "CRC Stripping",
+ .err = "defaulting to enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_CrcStripping > bd) {
+ unsigned int crc_stripping = CrcStripping[bd];
+ e1000_validate_option(&crc_stripping, &opt, adapter);
+ if (crc_stripping == OPTION_ENABLED)
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ }
+ }
{ /* Kumeran Lock Loss Workaround */
const struct e1000_option opt = {
.type = enable_option,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 83a5cb6aa23b..c4af949bf860 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev)
if (bdp->status & TXBD_DEF)
dev->stats.collisions++;
+ /* Unmap the DMA memory */
+ dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+ bdp->length, DMA_TO_DEVICE);
+
/* Free the sk buffer associated with this TxBD */
dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]);
@@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
skb = priv->rx_skbuff[priv->skb_currx];
+ dma_unmap_single(&priv->dev->dev, bdp->bufPtr,
+ priv->rx_buffer_size, DMA_FROM_DEVICE);
+
/* We drop the frame if we failed to allocate a new buffer */
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
bdp->status & RXBD_ERR)) {
@@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
if (unlikely(!newskb))
newskb = skb;
- if (skb) {
- dma_unmap_single(&priv->dev->dev,
- bdp->bufPtr,
- priv->rx_buffer_size,
- DMA_FROM_DEVICE);
-
+ if (skb)
dev_kfree_skb_any(skb);
- }
} else {
/* Increment the number of packets */
dev->stats.rx_packets++;
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 58906c984be9..89964fa739a0 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
/* this function will set ->supported = 0 and return 1 if wol is not
* supported by this hardware */
- if (igb_wol_exclusion(adapter, wol))
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return;
/* apply any specific unsupported masks here */
@@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
return -EOPNOTSUPP;
- if (igb_wol_exclusion(adapter, wol))
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
return wol->wolopts ? -EOPNOTSUPP : 0;
switch (hw->device_id) {
@@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= E1000_WUFC_MAG;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 1f397cd99414..1cbae85b1426 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev,
state &= ~PCIE_LINK_STATE_L0S;
pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL,
state);
- printk(KERN_INFO "Disabling ASPM L0s upstream switch "
- "port %x:%x.%x\n", us_dev->bus->number,
- PCI_SLOT(us_dev->devfn),
- PCI_FUNC(us_dev->devfn));
+ dev_info(&pdev->dev,
+ "Disabling ASPM L0s upstream switch port %s\n",
+ pci_name(us_dev));
}
default:
break;
@@ -1244,6 +1243,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
/* initialize the wol settings based on the eeprom settings */
adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
/* reset the hardware with the new settings */
igb_reset(adapter);
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index a3f732418c49..96e709d6440a 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev)
/* Configure port */
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- mdev->profile.tx_pause,
- mdev->profile.tx_ppp,
- mdev->profile.rx_pause,
- mdev->profile.rx_ppp);
+ priv->prof->tx_pause,
+ priv->prof->tx_ppp,
+ priv->prof->rx_pause,
+ priv->prof->rx_ppp);
if (err) {
mlx4_err(mdev, "Failed setting port general configurations"
" for port %d, with error %d\n", priv->port, err);
diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c
index c2e69b1bcd0a..95706ee1c019 100644
--- a/drivers/net/mlx4/en_params.c
+++ b/drivers/net/mlx4/en_params.c
@@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2");
int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
{
struct mlx4_en_profile *params = &mdev->profile;
+ int i;
params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF);
params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF);
@@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev)
params->rss_xor = (rss_xor != 0);
params->rss_mask = rss_mask & 0x1f;
params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS);
- params->rx_pause = pprx;
- params->rx_ppp = pfcrx;
- params->tx_pause = pptx;
- params->tx_ppp = pfctx;
- if (params->rx_ppp || params->tx_ppp) {
+ for (i = 1; i <= MLX4_MAX_PORTS; i++) {
+ params->prof[i].rx_pause = pprx;
+ params->prof[i].rx_ppp = pfcrx;
+ params->prof[i].tx_pause = pptx;
+ params->prof[i].tx_ppp = pfctx;
+ }
+ if (pfcrx || pfctx) {
params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM;
params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM;
} else {
@@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev,
struct mlx4_en_dev *mdev = priv->mdev;
int err;
- mdev->profile.tx_pause = pause->tx_pause != 0;
- mdev->profile.rx_pause = pause->rx_pause != 0;
+ priv->prof->tx_pause = pause->tx_pause != 0;
+ priv->prof->rx_pause = pause->rx_pause != 0;
err = mlx4_SET_PORT_general(mdev->dev, priv->port,
priv->rx_skb_size + ETH_FCS_LEN,
- mdev->profile.tx_pause,
- mdev->profile.tx_ppp,
- mdev->profile.rx_pause,
- mdev->profile.rx_ppp);
+ priv->prof->tx_pause,
+ priv->prof->tx_ppp,
+ priv->prof->rx_pause,
+ priv->prof->rx_ppp);
if (err)
mlx4_err(mdev, "Failed setting pause params to\n");
@@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev,
struct ethtool_pauseparam *pause)
{
struct mlx4_en_priv *priv = netdev_priv(dev);
- struct mlx4_en_dev *mdev = priv->mdev;
- pause->tx_pause = mdev->profile.tx_pause;
- pause->rx_pause = mdev->profile.rx_pause;
+ pause->tx_pause = priv->prof->tx_pause;
+ pause->rx_pause = priv->prof->rx_pause;
}
static void mlx4_en_get_ringparam(struct net_device *dev,
diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h
index 11fb17c6e97b..98ddc0811f93 100644
--- a/drivers/net/mlx4/mlx4_en.h
+++ b/drivers/net/mlx4/mlx4_en.h
@@ -322,6 +322,10 @@ struct mlx4_en_port_profile {
u32 rx_ring_num;
u32 tx_ring_size;
u32 rx_ring_size;
+ u8 rx_pause;
+ u8 rx_ppp;
+ u8 tx_pause;
+ u8 tx_ppp;
};
struct mlx4_en_profile {
@@ -333,10 +337,6 @@ struct mlx4_en_profile {
int rx_moder_cnt;
int rx_moder_time;
int auto_moder;
- u8 rx_pause;
- u8 rx_ppp;
- u8 tx_pause;
- u8 tx_ppp;
u8 no_reset;
struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1];
};
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d8463b1c3df3..1b6f548c4411 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -33,8 +33,8 @@
#define DRV_MODULE_NAME "niu"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "0.9"
-#define DRV_MODULE_RELDATE "May 4, 2008"
+#define DRV_MODULE_VERSION "1.0"
+#define DRV_MODULE_RELDATE "Nov 14, 2008"
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val)
}
/* Mode is always 10G fiber. */
-static int serdes_init_niu(struct niu *np)
+static int serdes_init_niu_10g_fiber(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
u32 tx_cfg, rx_cfg;
@@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np)
return 0;
}
+static int serdes_init_niu_1g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u16 pll_cfg, pll_sts;
+ int max_retry = 100;
+ u64 sig, mask, val;
+ u32 tx_cfg, rx_cfg;
+ unsigned long i;
+ int err;
+
+ tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV |
+ PLL_TX_CFG_RATE_HALF);
+ rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+ PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+ PLL_RX_CFG_RATE_HALF);
+
+ if (np->port == 0)
+ rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE;
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+ mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+ tx_cfg |= PLL_TX_CFG_ENTEST;
+ rx_cfg |= PLL_RX_CFG_ENTEST;
+ }
+
+ /* Initialize PLL for 1G */
+ pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X);
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_CFG_L, pll_cfg);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_1g_serdes: "
+ "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+ return err;
+ }
+
+ pll_sts = PLL_CFG_ENPLL;
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_STS_L, pll_sts);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_1g_serdes: "
+ "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+ return err;
+ }
+
+ udelay(200);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_tx_cfg(np, i, tx_cfg);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_rx_cfg(np, i, rx_cfg);
+ if (err)
+ return err;
+ }
+
+ switch (np->port) {
+ case 0:
+ val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0);
+ mask = val;
+ break;
+
+ case 1:
+ val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1);
+ mask = val;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (max_retry--) {
+ sig = nr64(ESR_INT_SIGNALS);
+ if ((sig & mask) == val)
+ break;
+
+ mdelay(500);
+ }
+
+ if ((sig & mask) != val) {
+ dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
+ "[%08x]\n", np->port, (int) (sig & mask), (int) val);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int serdes_init_niu_10g_serdes(struct niu *np)
+{
+ struct niu_link_config *lp = &np->link_config;
+ u32 tx_cfg, rx_cfg, pll_cfg, pll_sts;
+ int max_retry = 100;
+ u64 sig, mask, val;
+ unsigned long i;
+ int err;
+
+ tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV);
+ rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT |
+ PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH |
+ PLL_RX_CFG_EQ_LP_ADAPTIVE);
+
+ if (lp->loopback_mode == LOOPBACK_PHY) {
+ u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS;
+
+ mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_TEST_CFG_L, test_cfg);
+
+ tx_cfg |= PLL_TX_CFG_ENTEST;
+ rx_cfg |= PLL_RX_CFG_ENTEST;
+ }
+
+ /* Initialize PLL for 10G */
+ pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X);
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_10g_serdes: "
+ "mdio write to ESR2_TI_PLL_CFG_L failed", np->port);
+ return err;
+ }
+
+ pll_sts = PLL_CFG_ENPLL;
+
+ err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR,
+ ESR2_TI_PLL_STS_L, pll_sts & 0xffff);
+ if (err) {
+ dev_err(np->device, PFX "NIU Port %d "
+ "serdes_init_niu_10g_serdes: "
+ "mdio write to ESR2_TI_PLL_STS_L failed", np->port);
+ return err;
+ }
+
+ udelay(200);
+
+ /* Initialize all 4 lanes of the SERDES. */
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_tx_cfg(np, i, tx_cfg);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < 4; i++) {
+ err = esr2_set_rx_cfg(np, i, rx_cfg);
+ if (err)
+ return err;
+ }
+
+ /* check if serdes is ready */
+
+ switch (np->port) {
+ case 0:
+ mask = ESR_INT_SIGNALS_P0_BITS;
+ val = (ESR_INT_SRDY0_P0 |
+ ESR_INT_DET0_P0 |
+ ESR_INT_XSRDY_P0 |
+ ESR_INT_XDP_P0_CH3 |
+ ESR_INT_XDP_P0_CH2 |
+ ESR_INT_XDP_P0_CH1 |
+ ESR_INT_XDP_P0_CH0);
+ break;
+
+ case 1:
+ mask = ESR_INT_SIGNALS_P1_BITS;
+ val = (ESR_INT_SRDY0_P1 |
+ ESR_INT_DET0_P1 |
+ ESR_INT_XSRDY_P1 |
+ ESR_INT_XDP_P1_CH3 |
+ ESR_INT_XDP_P1_CH2 |
+ ESR_INT_XDP_P1_CH1 |
+ ESR_INT_XDP_P1_CH0);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ while (max_retry--) {
+ sig = nr64(ESR_INT_SIGNALS);
+ if ((sig & mask) == val)
+ break;
+
+ mdelay(500);
+ }
+
+ if ((sig & mask) != val) {
+ pr_info(PFX "NIU Port %u signal bits [%08x] are not "
+ "[%08x] for 10G...trying 1G\n",
+ np->port, (int) (sig & mask), (int) val);
+
+ /* 10G failed, try initializing at 1G */
+ err = serdes_init_niu_1g_serdes(np);
+ if (!err) {
+ np->flags &= ~NIU_FLAGS_10G;
+ np->mac_xcvr = MAC_XCVR_PCS;
+ } else {
+ dev_err(np->device, PFX "Port %u 10G/1G SERDES "
+ "Link Failed \n", np->port);
+ return -ENODEV;
+ }
+ }
+ return 0;
+}
+
static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val)
{
int err;
@@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = {
.link_status = link_status_10g_serdes,
};
+static const struct niu_phy_ops phy_ops_10g_serdes_niu = {
+ .serdes_init = serdes_init_niu_10g_serdes,
+ .link_status = link_status_10g_serdes,
+};
+
+static const struct niu_phy_ops phy_ops_1g_serdes_niu = {
+ .serdes_init = serdes_init_niu_1g_serdes,
+ .link_status = link_status_1g_serdes,
+};
+
static const struct niu_phy_ops phy_ops_1g_rgmii = {
.xcvr_init = xcvr_init_1g_rgmii,
.link_status = link_status_1g_rgmii,
};
static const struct niu_phy_ops phy_ops_10g_fiber_niu = {
- .serdes_init = serdes_init_niu,
+ .serdes_init = serdes_init_niu_10g_fiber,
.xcvr_init = xcvr_init_10g,
.link_status = link_status_10g,
};
@@ -1998,11 +2225,21 @@ struct niu_phy_template {
u32 phy_addr_base;
};
-static const struct niu_phy_template phy_template_niu = {
+static const struct niu_phy_template phy_template_niu_10g_fiber = {
.ops = &phy_ops_10g_fiber_niu,
.phy_addr_base = 16,
};
+static const struct niu_phy_template phy_template_niu_10g_serdes = {
+ .ops = &phy_ops_10g_serdes_niu,
+ .phy_addr_base = 0,
+};
+
+static const struct niu_phy_template phy_template_niu_1g_serdes = {
+ .ops = &phy_ops_1g_serdes_niu,
+ .phy_addr_base = 0,
+};
+
static const struct niu_phy_template phy_template_10g_fiber = {
.ops = &phy_ops_10g_fiber,
.phy_addr_base = 8,
@@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np)
u32 phy_addr_off = 0;
if (plat_type == PLAT_TYPE_NIU) {
- tp = &phy_template_niu;
- phy_addr_off += np->port;
+ switch (np->flags &
+ (NIU_FLAGS_10G |
+ NIU_FLAGS_FIBER |
+ NIU_FLAGS_XCVR_SERDES)) {
+ case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
+ /* 10G Serdes */
+ tp = &phy_template_niu_10g_serdes;
+ break;
+ case NIU_FLAGS_XCVR_SERDES:
+ /* 1G Serdes */
+ tp = &phy_template_niu_1g_serdes;
+ break;
+ case NIU_FLAGS_10G | NIU_FLAGS_FIBER:
+ /* 10G Fiber */
+ default:
+ tp = &phy_template_niu_10g_fiber;
+ phy_addr_off += np->port;
+ break;
+ }
} else {
switch (np->flags &
(NIU_FLAGS_10G |
@@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
np->flags |= NIU_FLAGS_10G;
np->flags &= ~NIU_FLAGS_FIBER;
np->mac_xcvr = MAC_XCVR_XPCS;
+ } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) {
+ /* 10G Serdes or 1G Serdes, default to 10G */
+ np->flags |= NIU_FLAGS_10G;
+ np->flags &= ~NIU_FLAGS_FIBER;
+ np->flags |= NIU_FLAGS_XCVR_SERDES;
+ np->mac_xcvr = MAC_XCVR_XPCS;
} else {
return -EINVAL;
}
@@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
u32 val;
int err;
+ num_10g = num_1g = 0;
+
if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
!strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
num_10g = 0;
@@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
parent->num_ports = 2;
val = (phy_encode(PORT_TYPE_10G, 0) |
phy_encode(PORT_TYPE_10G, 1));
+ } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) &&
+ (parent->plat_type == PLAT_TYPE_NIU)) {
+ /* this is the Monza case */
+ if (np->flags & NIU_FLAGS_10G) {
+ val = (phy_encode(PORT_TYPE_10G, 0) |
+ phy_encode(PORT_TYPE_10G, 1));
+ } else {
+ val = (phy_encode(PORT_TYPE_1G, 0) |
+ phy_encode(PORT_TYPE_1G, 1));
+ }
} else {
err = fill_phy_probe_info(np, parent, info);
if (err)
@@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np)
dev->name,
(np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"),
(np->flags & NIU_FLAGS_10G ? "10G" : "1G"),
- (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"),
+ (np->flags & NIU_FLAGS_FIBER ? "FIBER" :
+ (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" :
+ "COPPER")),
(np->mac_xcvr == MAC_XCVR_MII ? "MII" :
(np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")),
np->vpd.phy_type);
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index c6fa883daa22..180ca8ae93de 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -1048,6 +1048,13 @@
#define PLL_CFG_LD_SHIFT 8
#define PLL_CFG_MPY 0x0000001e
#define PLL_CFG_MPY_SHIFT 1
+#define PLL_CFG_MPY_4X 0x0
+#define PLL_CFG_MPY_5X 0x00000002
+#define PLL_CFG_MPY_6X 0x00000004
+#define PLL_CFG_MPY_8X 0x00000008
+#define PLL_CFG_MPY_10X 0x0000000a
+#define PLL_CFG_MPY_12X 0x0000000c
+#define PLL_CFG_MPY_12P5X 0x0000000e
#define PLL_CFG_ENPLL 0x00000001
#define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002)
@@ -1093,6 +1100,9 @@
#define PLL_TX_CFG_INVPAIR 0x00000080
#define PLL_TX_CFG_RATE 0x00000060
#define PLL_TX_CFG_RATE_SHIFT 5
+#define PLL_TX_CFG_RATE_FULL 0x0
+#define PLL_TX_CFG_RATE_HALF 0x20
+#define PLL_TX_CFG_RATE_QUAD 0x40
#define PLL_TX_CFG_BUSWIDTH 0x0000001c
#define PLL_TX_CFG_BUSWIDTH_SHIFT 2
#define PLL_TX_CFG_ENTEST 0x00000002
@@ -1132,6 +1142,9 @@
#define PLL_RX_CFG_INVPAIR 0x00000080
#define PLL_RX_CFG_RATE 0x00000060
#define PLL_RX_CFG_RATE_SHIFT 5
+#define PLL_RX_CFG_RATE_FULL 0x0
+#define PLL_RX_CFG_RATE_HALF 0x20
+#define PLL_RX_CFG_RATE_QUAD 0x40
#define PLL_RX_CFG_BUSWIDTH 0x0000001c
#define PLL_RX_CFG_BUSWIDTH_SHIFT 2
#define PLL_RX_CFG_ENTEST 0x00000002
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 4aa547947040..eb6411c4694f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev)
return 0;
}
+static int m88e1118_config_aneg(struct phy_device *phydev)
+{
+ int err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_M1011_PHY_SCR,
+ MII_M1011_PHY_SCR_AUTO_CROSS);
+ if (err < 0)
+ return err;
+
+ err = genphy_config_aneg(phydev);
+ return 0;
+}
+
+static int m88e1118_config_init(struct phy_device *phydev)
+{
+ int err;
+
+ /* Change address */
+ err = phy_write(phydev, 0x16, 0x0002);
+ if (err < 0)
+ return err;
+
+ /* Enable 1000 Mbit */
+ err = phy_write(phydev, 0x15, 0x1070);
+ if (err < 0)
+ return err;
+
+ /* Change address */
+ err = phy_write(phydev, 0x16, 0x0003);
+ if (err < 0)
+ return err;
+
+ /* Adjust LED Control */
+ err = phy_write(phydev, 0x10, 0x021e);
+ if (err < 0)
+ return err;
+
+ /* Reset address */
+ err = phy_write(phydev, 0x16, 0x0);
+ if (err < 0)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
static int m88e1145_config_init(struct phy_device *phydev)
{
int err;
@@ -416,6 +469,19 @@ static struct phy_driver marvell_drivers[] = {
.driver = { .owner = THIS_MODULE },
},
{
+ .phy_id = 0x01410e10,
+ .phy_id_mask = 0xfffffff0,
+ .name = "Marvell 88E1118",
+ .features = PHY_GBIT_FEATURES,
+ .flags = PHY_HAS_INTERRUPT,
+ .config_init = &m88e1118_config_init,
+ .config_aneg = &m88e1118_config_aneg,
+ .read_status = &genphy_read_status,
+ .ack_interrupt = &marvell_ack_interrupt,
+ .config_intr = &marvell_config_intr,
+ .driver = {.owner = THIS_MODULE,},
+ },
+ {
.phy_id = 0x01410cd0,
.phy_id_mask = 0xfffffff0,
.name = "Marvell 88E1145",
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index d0ed1ef284a8..536bda1f428b 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus)
BUG_ON(bus->state != MDIOBUS_REGISTERED);
bus->state = MDIOBUS_UNREGISTERED;
- device_unregister(&bus->dev);
+ device_del(&bus->dev);
for (i = 0; i < PHY_MAX_ADDR; i++) {
if (bus->phy_map[i])
device_unregister(&bus->phy_map[i]->dev);
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index e11b03b2b25a..8fb1faca883a 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
if (r)
return ERR_PTR(r);
- /* If the phy_id is all Fs, there is no device there */
- if (0xffffffff == phy_id)
+ /* If the phy_id is all Fs or all 0s, there is no device there */
+ if ((0xffff == phy_id) || (0x00 == phy_id))
return NULL;
dev = phy_device_create(bus, addr, phy_id);
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 3cdd07c45b6d..508452c02151 100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev)
linkState = LS_UP;
} else {
linkState = LS_DOWN;
- if (netif_msg_link(qdev))
- printk(KERN_WARNING PFX
- "%s: Link is down.\n", qdev->ndev->name);
}
return linkState;
}
@@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev)
ql_mac_enable(qdev, 1);
}
- if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: Change port_link_state LS_DOWN to LS_UP.\n",
- qdev->ndev->name);
qdev->port_link_state = LS_UP;
netif_start_queue(qdev->ndev);
netif_carrier_on(qdev->ndev);
@@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work)
/* Fall Through */
case LS_DOWN:
- if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: port_link_state = LS_DOWN.\n",
- qdev->ndev->name);
if (curr_link_state == LS_UP) {
if (netif_msg_link(qdev))
- printk(KERN_DEBUG PFX
- "%s: curr_link_state = LS_UP.\n",
+ printk(KERN_INFO PFX "%s: Link is up.\n",
qdev->ndev->name);
if (ql_is_auto_neg_complete(qdev))
ql_finish_auto_neg(qdev);
@@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work)
if (qdev->port_link_state == LS_UP)
ql_link_down_detect_clear(qdev);
+ qdev->port_link_state = LS_UP;
}
break;
@@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work)
* See if the link is currently down or went down and came
* back up
*/
- if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) {
+ if (curr_link_state == LS_DOWN) {
if (netif_msg_link(qdev))
printk(KERN_INFO PFX "%s: Link is down.\n",
qdev->ndev->name);
qdev->port_link_state = LS_DOWN;
}
+ if (ql_link_down_detect(qdev))
+ qdev->port_link_state = LS_DOWN;
break;
}
spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 85f38a6b6a49..68a7f5414133 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev,
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) {
base = (u32 __iomem *)&ugeth->ug_regs->tx64;
for (i = 0; i < UEC_HW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = in_be32(&base[i]);
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) {
base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram;
for (i = 0; i < UEC_TX_FW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = base ? in_be32(&base[i]) : 0;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) {
base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram;
for (i = 0; i < UEC_RX_FW_STATS_LEN; i++)
- data[j++] = (u64)in_be32(&base[i]);
+ data[j++] = base ? in_be32(&base[i]) : 0;
}
}
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 3590ea5a902d..11cb3e504e1c 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev)
}
mac_set_cam_mask(regs, vptr->mCAMmask);
- rx_mode = (RCR_AM | RCR_AB);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
}
if (dev->mtu > 1500)
rx_mode |= RCR_AL;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 06:20:54 +0000