summaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/fschmd.c2
-rw-r--r--drivers/infiniband/hw/mlx4/cq.c2
-rw-r--r--drivers/message/i2o/i2o_scsi.c2
-rw-r--r--drivers/mtd/devices/pmc551.c2
-rw-r--r--drivers/mtd/ubi/eba.c2
-rw-r--r--drivers/mtd/ubi/io.c2
-rw-r--r--drivers/mtd/ubi/scan.c2
-rw-r--r--drivers/mtd/ubi/ubi-media.h4
-rw-r--r--drivers/mtd/ubi/vtbl.c2
-rw-r--r--drivers/mtd/ubi/wl.c4
-rw-r--r--drivers/net/bnx2x_link.c2
-rw-r--r--drivers/net/e1000/e1000_hw.c4
-rw-r--r--drivers/net/slip.h2
-rw-r--r--drivers/net/tehuti.c4
-rw-r--r--drivers/net/tokenring/smctr.c2
-rw-r--r--drivers/net/wireless/ipw2x00/ipw2100.c2
-rw-r--r--drivers/net/wireless/rt2x00/rt2x00crypto.c4
-rw-r--r--drivers/net/wireless/strip.c2
-rw-r--r--drivers/s390/block/dasd_eer.c4
-rw-r--r--drivers/s390/char/vmlogrdr.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c4
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c10
-rw-r--r--drivers/serial/crisv10.c4
-rw-r--r--drivers/video/console/vgacon.c2
24 files changed, 37 insertions, 37 deletions
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index 967170368933..8b2d756595d9 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -75,7 +75,7 @@ static const u8 FSCHMD_REG_VOLT[3] = { 0x45, 0x42, 0x48 };
/* minimum pwm at which the fan is driven (pwm can by increased depending on
the temp. Notice that for the scy some fans share there minimum speed.
- Also notice that with the scy the sensor order is different then with the
+ Also notice that with the scy the sensor order is different than with the
other chips, this order was in the 2.4 driver and kept for consistency. */
static const u8 FSCHMD_REG_FAN_MIN[5][6] = {
{ 0x55, 0x65 }, /* pos */
diff --git a/drivers/infiniband/hw/mlx4/cq.c b/drivers/infiniband/hw/mlx4/cq.c
index a3c5af1d7ec0..de5263beab4a 100644
--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -367,7 +367,7 @@ int mlx4_ib_resize_cq(struct ib_cq *ibcq, int entries, struct ib_udata *udata)
if (err)
goto out;
} else {
- /* Can't be smaller then the number of outstanding CQEs */
+ /* Can't be smaller than the number of outstanding CQEs */
outst_cqe = mlx4_ib_get_outstanding_cqes(cq);
if (entries < outst_cqe + 1) {
err = 0;
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 1bcdbbb9e7d3..3d45817e6dcd 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -390,7 +390,7 @@ static int i2o_scsi_reply(struct i2o_controller *c, u32 m,
* @i2o_dev: the I2O device which was added
*
* If a I2O device is added we catch the notification, because I2O classes
- * other then SCSI peripheral will not be received through
+ * other than SCSI peripheral will not be received through
* i2o_scsi_probe().
*/
static void i2o_scsi_notify_device_add(struct i2o_device *i2o_dev)
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index d38bca64bb15..d2fd550f7e09 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -34,7 +34,7 @@
* aperture size, not the dram size, and the V370PDC supplies no
* other method for memory size discovery. This problem is
* mostly only relevant when compiled as a module, as the
- * unloading of the module with an aperture size smaller then
+ * unloading of the module with an aperture size smaller than
* the ram will cause the driver to detect the onboard memory
* size to be equal to the aperture size when the module is
* reloaded. Soooo, to help, the module supports an msize
diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c
index 048a606cebde..25def348e5ba 100644
--- a/drivers/mtd/ubi/eba.c
+++ b/drivers/mtd/ubi/eba.c
@@ -717,7 +717,7 @@ write_error:
* to the real data size, although the @buf buffer has to contain the
* alignment. In all other cases, @len has to be aligned.
*
- * It is prohibited to write more then once to logical eraseblocks of static
+ * It is prohibited to write more than once to logical eraseblocks of static
* volumes. This function returns zero in case of success and a negative error
* code in case of failure.
*/
diff --git a/drivers/mtd/ubi/io.c b/drivers/mtd/ubi/io.c
index a74118c05745..fe81039f2a7c 100644
--- a/drivers/mtd/ubi/io.c
+++ b/drivers/mtd/ubi/io.c
@@ -465,7 +465,7 @@ out:
* This function synchronously erases physical eraseblock @pnum. If @torture
* flag is not zero, the physical eraseblock is checked by means of writing
* different patterns to it and reading them back. If the torturing is enabled,
- * the physical eraseblock is erased more then once.
+ * the physical eraseblock is erased more than once.
*
* This function returns the number of erasures made in case of success, %-EIO
* if the erasure failed or the torturing test failed, and other negative error
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 41d47e1cf15c..ecde202a5a12 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -478,7 +478,7 @@ int ubi_scan_add_used(struct ubi_device *ubi, struct ubi_scan_info *si,
return 0;
} else {
/*
- * This logical eraseblock is older then the one found
+ * This logical eraseblock is older than the one found
* previously.
*/
if (cmp_res & 4)
diff --git a/drivers/mtd/ubi/ubi-media.h b/drivers/mtd/ubi/ubi-media.h
index 2ad940409053..8419fdccc79c 100644
--- a/drivers/mtd/ubi/ubi-media.h
+++ b/drivers/mtd/ubi/ubi-media.h
@@ -135,7 +135,7 @@ enum {
* The erase counter header takes 64 bytes and has a plenty of unused space for
* future usage. The unused fields are zeroed. The @version field is used to
* indicate the version of UBI implementation which is supposed to be able to
- * work with this UBI image. If @version is greater then the current UBI
+ * work with this UBI image. If @version is greater than the current UBI
* version, the image is rejected. This may be useful in future if something
* is changed radically. This field is duplicated in the volume identifier
* header.
@@ -187,7 +187,7 @@ struct ubi_ec_hdr {
* (sequence number) is used to distinguish between older and newer versions of
* logical eraseblocks.
*
- * There are 2 situations when there may be more then one physical eraseblock
+ * There are 2 situations when there may be more than one physical eraseblock
* corresponding to the same logical eraseblock, i.e., having the same @vol_id
* and @lnum values in the volume identifier header. Suppose we have a logical
* eraseblock L and it is mapped to the physical eraseblock P.
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
index 333c8941552f..1afc61e7455d 100644
--- a/drivers/mtd/ubi/vtbl.c
+++ b/drivers/mtd/ubi/vtbl.c
@@ -577,7 +577,7 @@ static int init_volumes(struct ubi_device *ubi, const struct ubi_scan_info *si,
if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
/* Auto re-size flag may be set only for one volume */
if (ubi->autoresize_vol_id != -1) {
- ubi_err("more then one auto-resize volume (%d "
+ ubi_err("more than one auto-resize volume (%d "
"and %d)", ubi->autoresize_vol_id, i);
kfree(vol);
return -EINVAL;
diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c
index 14901cb82c18..891534f8210d 100644
--- a/drivers/mtd/ubi/wl.c
+++ b/drivers/mtd/ubi/wl.c
@@ -128,7 +128,7 @@
* situation when the picked physical eraseblock is constantly erased after the
* data is written to it. So, we have a constant which limits the highest erase
* counter of the free physical eraseblock to pick. Namely, the WL sub-system
- * does not pick eraseblocks with erase counter greater then the lowest erase
+ * does not pick eraseblocks with erase counter greater than the lowest erase
* counter plus %WL_FREE_MAX_DIFF.
*/
#define WL_FREE_MAX_DIFF (2*UBI_WL_THRESHOLD)
@@ -917,7 +917,7 @@ static int ensure_wear_leveling(struct ubi_device *ubi)
/*
* We schedule wear-leveling only if the difference between the
* lowest erase counter of used physical eraseblocks and a high
- * erase counter of free physical eraseblocks is greater then
+ * erase counter of free physical eraseblocks is greater than
* %UBI_WL_THRESHOLD.
*/
e1 = rb_entry(rb_first(&ubi->used), struct ubi_wl_entry, u.rb);
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index 67de94f1f30e..fefa6ab13064 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -3359,7 +3359,7 @@ static u8 bnx2x_format_ver(u32 num, u8 *str, u16 len)
u8 shift = 8*4;
u8 digit;
if (len < 10) {
- /* Need more then 10chars for this format */
+ /* Need more than 10chars for this format */
*str_ptr = '\0';
return -EINVAL;
}
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index d04eef53571e..e1a3fc1303ee 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -6758,7 +6758,7 @@ static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function simply reads the polarity bit in the
+ * For phy's older than IGP, this function simply reads the polarity bit in the
* Phy Status register. For IGP phy's, this bit is valid only if link speed is
* 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
* return 0. If the link speed is 1000 Mbps the polarity status is in the
@@ -6834,7 +6834,7 @@ static s32 e1000_check_polarity(struct e1000_hw *hw,
* returns: - E1000_ERR_XXX
* E1000_SUCCESS
*
- * For phy's older then IGP, this function reads the Downshift bit in the Phy
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
* Specific Status register. For IGP phy's, it reads the Downgrade bit in the
* Link Health register. In IGP this bit is latched high, so the driver must
* read it immediately after link is established.
diff --git a/drivers/net/slip.h b/drivers/net/slip.h
index 853e0f6ec710..9ea5c11287d2 100644
--- a/drivers/net/slip.h
+++ b/drivers/net/slip.h
@@ -75,7 +75,7 @@ struct slip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then SLIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than SLIP buf. */
#ifdef SL_INCLUDE_CSLIP
unsigned long tx_compressed;
unsigned long rx_compressed;
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index a10a83a11d9f..a7a4dc4d6313 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1004,7 +1004,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
* skb for rx. It assumes that Rx is desabled in HW
* funcs are grouped for better cache usage
*
- * RxD fifo is smaller then RxF fifo by design. Upon high load, RxD will be
+ * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
* filled and packets will be dropped by nic without getting into host or
* cousing interrupt. Anyway, in that condition, host has no chance to proccess
* all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
@@ -1826,7 +1826,7 @@ static void bdx_tx_free(struct bdx_priv *priv)
*
* Pushes desc to TxD fifo and overlaps it if needed.
* NOTE: this func does not check for available space. this is responsibility
- * of the caller. Neither does it check that data size is smaller then
+ * of the caller. Neither does it check that data size is smaller than
* fifo size.
*/
static void bdx_tx_push_desc(struct bdx_priv *priv, void *data, int size)
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index a011666342ff..50eb29ce3c87 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -3064,7 +3064,7 @@ static int smctr_load_node_addr(struct net_device *dev)
* will consequently cause a timeout.
*
* NOTE 1: If the monitor_state is MS_BEACON_TEST_STATE, all transmit
- * queues other then the one used for the lobe_media_test should be
+ * queues other than the one used for the lobe_media_test should be
* disabled.!?
*
* NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 1667065b86a7..753de1a9c4b3 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1332,7 +1332,7 @@ static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
IPW_AUX_HOST_RESET_REG_STOP_MASTER);
/* Step 2. Wait for stop Master Assert
- * (not more then 50us, otherwise ret error */
+ * (not more than 50us, otherwise ret error */
i = 5;
do {
udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 37ad0d2fb64c..aee9cba13eb3 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -184,8 +184,8 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb, unsigned int align,
* Make room for new data, note that we increase both
* headsize and tailsize when required. The tailsize is
* only needed when ICV data needs to be inserted and
- * the padding is smaller then the ICV data.
- * When alignment requirements is greater then the
+ * the padding is smaller than the ICV data.
+ * When alignment requirements is greater than the
* ICV data we must trim the skb to the correct size
* because we need to remove the extra bytes.
*/
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index dd0de3a9ed4e..7015f2480550 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -236,7 +236,7 @@ struct strip {
unsigned long tx_errors; /* Planned stuff */
unsigned long rx_dropped; /* No memory for skb */
unsigned long tx_dropped; /* When MTU change */
- unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */
+ unsigned long rx_over_errors; /* Frame bigger than STRIP buf. */
unsigned long pps_timer; /* Timer to determine pps */
unsigned long rx_pps_count; /* Counter to determine pps */
diff --git a/drivers/s390/block/dasd_eer.c b/drivers/s390/block/dasd_eer.c
index 892e2878d61b..f8e05ce98621 100644
--- a/drivers/s390/block/dasd_eer.c
+++ b/drivers/s390/block/dasd_eer.c
@@ -535,8 +535,8 @@ static int dasd_eer_open(struct inode *inp, struct file *filp)
eerb->buffer_page_count > INT_MAX / PAGE_SIZE) {
kfree(eerb);
MESSAGE(KERN_WARNING, "can't open device since module "
- "parameter eer_pages is smaller then 1 or"
- " bigger then %d", (int)(INT_MAX / PAGE_SIZE));
+ "parameter eer_pages is smaller than 1 or"
+ " bigger than %d", (int)(INT_MAX / PAGE_SIZE));
unlock_kernel();
return -EINVAL;
}
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index aabbeb909cc6..d8a2289fcb69 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -427,7 +427,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
buffer = priv->buffer + sizeof(int);
}
/*
- * If the record is bigger then our buffer, we receive only
+ * If the record is bigger than our buffer, we receive only
* a part of it. We can get the rest later.
*/
if (iucv_data_count > NET_BUFFER_SIZE)
@@ -437,7 +437,7 @@ static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
0, buffer, iucv_data_count,
&priv->residual_length);
spin_unlock_bh(&priv->priv_lock);
- /* An rc of 5 indicates that the record was bigger then
+ /* An rc of 5 indicates that the record was bigger than
* the buffer, which is OK for us. A 9 indicates that the
* record was purged befor we could receive it.
*/
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 8c64494444bf..311ed6dea726 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -1964,10 +1964,10 @@ lpfc_set_disctmo(struct lpfc_vport *vport)
uint32_t tmo;
if (vport->port_state == LPFC_LOCAL_CFG_LINK) {
- /* For FAN, timeout should be greater then edtov */
+ /* For FAN, timeout should be greater than edtov */
tmo = (((phba->fc_edtov + 999) / 1000) + 1);
} else {
- /* Normal discovery timeout should be > then ELS/CT timeout
+ /* Normal discovery timeout should be > than ELS/CT timeout
* FC spec states we need 3 * ratov for CT requests
*/
tmo = ((phba->fc_ratov * 3) + 3);
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 01dfdc8696f8..a36a120561e2 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -420,7 +420,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
if (unlikely(pring->local_getidx >= max_cmd_idx)) {
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0315 Ring %d issue: portCmdGet %d "
- "is bigger then cmd ring %d\n",
+ "is bigger than cmd ring %d\n",
pring->ringno,
pring->local_getidx, max_cmd_idx);
@@ -1628,12 +1628,12 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
struct lpfc_pgp *pgp = &phba->port_gp[pring->ringno];
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0312 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, le32_to_cpu(pgp->rspPutInx),
pring->numRiocb);
@@ -2083,12 +2083,12 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
portRspPut = le32_to_cpu(pgp->rspPutInx);
if (portRspPut >= portRspMax) {
/*
- * Ring <ringno> handler: portRspPut <portRspPut> is bigger then
+ * Ring <ringno> handler: portRspPut <portRspPut> is bigger than
* rsp ring <portRspMax>
*/
lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
"0303 Ring %d handler: portRspPut %d "
- "is bigger then rsp ring %d\n",
+ "is bigger than rsp ring %d\n",
pring->ringno, portRspPut, portRspMax);
phba->link_state = LPFC_HBA_ERROR;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 8b2c619a09f2..e642c22c80e2 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -1203,7 +1203,7 @@ static void e100_disable_txdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable output DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
DFLOW(DEBUG_LOG(info->line, "disable_txdma_channel %i\n", info->line));
@@ -1266,7 +1266,7 @@ static void e100_disable_rxdma_channel(struct e100_serial *info)
unsigned long flags;
/* Disable input DMA channel for the serial port in question
- * ( set to something other then serialX)
+ * ( set to something other than serialX)
*/
local_irq_save(flags);
if (info->line == 0) {
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index e6210725b9ab..d012edda6d11 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1332,7 +1332,7 @@ static void vgacon_save_screen(struct vc_data *c)
c->vc_y = screen_info.orig_y;
}
- /* We can't copy in more then the size of the video buffer,
+ /* We can't copy in more than the size of the video buffer,
* or we'll be copying in VGA BIOS */
if (!vga_is_gfx)
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 07:42:45 +0000