diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/of/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/of/Makefile | 1 | ||||
| -rw-r--r-- | drivers/of/of_pci.c | 112 | ||||
| -rw-r--r-- | drivers/of/of_pci_irq.c | 92 | ||||
| -rw-r--r-- | drivers/pci/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pci/hotplug/rpadlpar_core.c | 2 | ||||
| -rw-r--r-- | drivers/pci/of.c | 61 | ||||
| -rw-r--r-- | drivers/pci/probe.c | 7 |
8 files changed, 200 insertions, 85 deletions
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index d06a6374ed6c..cac63c9f49ae 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -71,8 +71,14 @@ config OF_MDIO config OF_PCI def_tristate PCI - depends on PCI && (PPC || MICROBLAZE || X86) + depends on PCI help OpenFirmware PCI bus accessors +config OF_PCI_IRQ + def_tristate PCI + depends on OF_PCI && OF_IRQ + help + OpenFirmware PCI IRQ routing helpers + endmenu # OF diff --git a/drivers/of/Makefile b/drivers/of/Makefile index f7861ed2f287..dccb1176be57 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -10,3 +10,4 @@ obj-$(CONFIG_OF_NET) += of_net.o obj-$(CONFIG_OF_SPI) += of_spi.o obj-$(CONFIG_OF_MDIO) += of_mdio.o obj-$(CONFIG_OF_PCI) += of_pci.o +obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o diff --git a/drivers/of/of_pci.c b/drivers/of/of_pci.c index ac1ec54e4fd5..ec7b060ae952 100644 --- a/drivers/of/of_pci.c +++ b/drivers/of/of_pci.c @@ -1,92 +1,40 @@ #include <linux/kernel.h> #include <linux/of_pci.h> -#include <linux/of_irq.h> #include <asm/prom.h> -/** - * of_irq_map_pci - Resolve the interrupt for a PCI device - * @pdev: the device whose interrupt is to be resolved - * @out_irq: structure of_irq filled by this function - * - * This function resolves the PCI interrupt for a given PCI device. If a - * device-node exists for a given pci_dev, it will use normal OF tree - * walking. If not, it will implement standard swizzling and walk up the - * PCI tree until an device-node is found, at which point it will finish - * resolving using the OF tree walking. - */ -int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +static inline int __of_pci_pci_compare(struct device_node *node, + unsigned int devfn) { - struct device_node *dn, *ppnode; - struct pci_dev *ppdev; - u32 lspec; - __be32 lspec_be; - __be32 laddr[3]; - u8 pin; - int rc; + unsigned int size; + const __be32 *reg = of_get_property(node, "reg", &size); - /* Check if we have a device node, if yes, fallback to standard - * device tree parsing - */ - dn = pci_device_to_OF_node(pdev); - if (dn) { - rc = of_irq_map_one(dn, 0, out_irq); - if (!rc) - return rc; - } - - /* Ok, we don't, time to have fun. Let's start by building up an - * interrupt spec. we assume #interrupt-cells is 1, which is standard - * for PCI. If you do different, then don't use that routine. - */ - rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); - if (rc != 0) - return rc; - /* No pin, exit */ - if (pin == 0) - return -ENODEV; - - /* Now we walk up the PCI tree */ - lspec = pin; - for (;;) { - /* Get the pci_dev of our parent */ - ppdev = pdev->bus->self; - - /* Ouch, it's a host bridge... */ - if (ppdev == NULL) { - ppnode = pci_bus_to_OF_node(pdev->bus); - - /* No node for host bridge ? give up */ - if (ppnode == NULL) - return -EINVAL; - } else { - /* We found a P2P bridge, check if it has a node */ - ppnode = pci_device_to_OF_node(ppdev); - } - - /* Ok, we have found a parent with a device-node, hand over to - * the OF parsing code. - * We build a unit address from the linux device to be used for - * resolution. Note that we use the linux bus number which may - * not match your firmware bus numbering. - * Fortunately, in most cases, interrupt-map-mask doesn't - * include the bus number as part of the matching. - * You should still be careful about that though if you intend - * to rely on this function (you ship a firmware that doesn't - * create device nodes for all PCI devices). - */ - if (ppnode) - break; + if (!reg || size < 5 * sizeof(__be32)) + return 0; + return ((be32_to_cpup(®[0]) >> 8) & 0xff) == devfn; +} - /* We can only get here if we hit a P2P bridge with no node, - * let's do standard swizzling and try again +struct device_node *of_pci_find_child_device(struct device_node *parent, + unsigned int devfn) +{ + struct device_node *node, *node2; + + for_each_child_of_node(parent, node) { + if (__of_pci_pci_compare(node, devfn)) + return node; + /* + * Some OFs create a parent node "multifunc-device" as + * a fake root for all functions of a multi-function + * device we go down them as well. */ - lspec = pci_swizzle_interrupt_pin(pdev, lspec); - pdev = ppdev; + if (!strcmp(node->name, "multifunc-device")) { + for_each_child_of_node(node, node2) { + if (__of_pci_pci_compare(node2, devfn)) { + of_node_put(node); + return node2; + } + } + } } - - lspec_be = cpu_to_be32(lspec); - laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); - laddr[1] = laddr[2] = cpu_to_be32(0); - return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); + return NULL; } -EXPORT_SYMBOL_GPL(of_irq_map_pci); +EXPORT_SYMBOL_GPL(of_pci_find_child_device); diff --git a/drivers/of/of_pci_irq.c b/drivers/of/of_pci_irq.c new file mode 100644 index 000000000000..ac1ec54e4fd5 --- /dev/null +++ b/drivers/of/of_pci_irq.c @@ -0,0 +1,92 @@ +#include <linux/kernel.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <asm/prom.h> + +/** + * of_irq_map_pci - Resolve the interrupt for a PCI device + * @pdev: the device whose interrupt is to be resolved + * @out_irq: structure of_irq filled by this function + * + * This function resolves the PCI interrupt for a given PCI device. If a + * device-node exists for a given pci_dev, it will use normal OF tree + * walking. If not, it will implement standard swizzling and walk up the + * PCI tree until an device-node is found, at which point it will finish + * resolving using the OF tree walking. + */ +int of_irq_map_pci(struct pci_dev *pdev, struct of_irq *out_irq) +{ + struct device_node *dn, *ppnode; + struct pci_dev *ppdev; + u32 lspec; + __be32 lspec_be; + __be32 laddr[3]; + u8 pin; + int rc; + + /* Check if we have a device node, if yes, fallback to standard + * device tree parsing + */ + dn = pci_device_to_OF_node(pdev); + if (dn) { + rc = of_irq_map_one(dn, 0, out_irq); + if (!rc) + return rc; + } + + /* Ok, we don't, time to have fun. Let's start by building up an + * interrupt spec. we assume #interrupt-cells is 1, which is standard + * for PCI. If you do different, then don't use that routine. + */ + rc = pci_read_config_byte(pdev, PCI_INTERRUPT_PIN, &pin); + if (rc != 0) + return rc; + /* No pin, exit */ + if (pin == 0) + return -ENODEV; + + /* Now we walk up the PCI tree */ + lspec = pin; + for (;;) { + /* Get the pci_dev of our parent */ + ppdev = pdev->bus->self; + + /* Ouch, it's a host bridge... */ + if (ppdev == NULL) { + ppnode = pci_bus_to_OF_node(pdev->bus); + + /* No node for host bridge ? give up */ + if (ppnode == NULL) + return -EINVAL; + } else { + /* We found a P2P bridge, check if it has a node */ + ppnode = pci_device_to_OF_node(ppdev); + } + + /* Ok, we have found a parent with a device-node, hand over to + * the OF parsing code. + * We build a unit address from the linux device to be used for + * resolution. Note that we use the linux bus number which may + * not match your firmware bus numbering. + * Fortunately, in most cases, interrupt-map-mask doesn't + * include the bus number as part of the matching. + * You should still be careful about that though if you intend + * to rely on this function (you ship a firmware that doesn't + * create device nodes for all PCI devices). + */ + if (ppnode) + break; + + /* We can only get here if we hit a P2P bridge with no node, + * let's do standard swizzling and try again + */ + lspec = pci_swizzle_interrupt_pin(pdev, lspec); + pdev = ppdev; + } + + lspec_be = cpu_to_be32(lspec); + laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8)); + laddr[1] = laddr[2] = cpu_to_be32(0); + return of_irq_map_raw(ppnode, &lspec_be, 1, laddr, out_irq); +} +EXPORT_SYMBOL_GPL(of_irq_map_pci); diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 094308e41be5..631f73027608 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -71,4 +71,6 @@ obj-$(CONFIG_PCI_STUB) += pci-stub.o obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o +obj-$(CONFIG_OF) += of.o + ccflags-$(CONFIG_PCI_DEBUG) := -DDEBUG diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 083034710fa6..1d002b1c2bf4 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -158,7 +158,7 @@ static void dlpar_pci_add_bus(struct device_node *dn) /* Scan below the new bridge */ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) - of_scan_pci_bridge(dn, dev); + of_scan_pci_bridge(dev); /* Map IO space for child bus, which may or may not succeed */ pcibios_map_io_space(dev->subordinate); diff --git a/drivers/pci/of.c b/drivers/pci/of.c new file mode 100644 index 000000000000..c94d37ec55c8 --- /dev/null +++ b/drivers/pci/of.c @@ -0,0 +1,61 @@ +/* + * PCI <-> OF mapping helpers + * + * Copyright 2011 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_pci.h> +#include "pci.h" + +void pci_set_of_node(struct pci_dev *dev) +{ + if (!dev->bus->dev.of_node) + return; + dev->dev.of_node = of_pci_find_child_device(dev->bus->dev.of_node, + dev->devfn); +} + +void pci_release_of_node(struct pci_dev *dev) +{ + of_node_put(dev->dev.of_node); + dev->dev.of_node = NULL; +} + +void pci_set_bus_of_node(struct pci_bus *bus) +{ + if (bus->self == NULL) + bus->dev.of_node = pcibios_get_phb_of_node(bus); + else + bus->dev.of_node = of_node_get(bus->self->dev.of_node); +} + +void pci_release_bus_of_node(struct pci_bus *bus) +{ + of_node_put(bus->dev.of_node); + bus->dev.of_node = NULL; +} + +struct device_node * __weak pcibios_get_phb_of_node(struct pci_bus *bus) +{ + /* This should only be called for PHBs */ + if (WARN_ON(bus->self || bus->parent)) + return NULL; + + /* Look for a node pointer in either the intermediary device we + * create above the root bus or it's own parent. Normally only + * the later is populated. + */ + if (bus->bridge->of_node) + return of_node_get(bus->bridge->of_node); + if (bus->bridge->parent->of_node) + return of_node_get(bus->bridge->parent->of_node); + return NULL; +} diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index bafb3c3d4a89..9ab492f21f86 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -52,6 +52,7 @@ static void release_pcibus_dev(struct device *dev) if (pci_bus->bridge) put_device(pci_bus->bridge); pci_bus_remove_resources(pci_bus); + pci_release_bus_of_node(pci_bus); kfree(pci_bus); } @@ -588,7 +589,7 @@ static struct pci_bus *pci_alloc_child_bus(struct pci_bus *parent, child->self = bridge; child->bridge = get_device(&bridge->dev); - + pci_set_bus_of_node(child); pci_set_bus_speed(child); /* Set up default resource pointers and names.. */ @@ -1038,6 +1039,7 @@ static void pci_release_dev(struct device *dev) pci_dev = to_pci_dev(dev); pci_release_capabilities(pci_dev); + pci_release_of_node(pci_dev); kfree(pci_dev); } @@ -1157,6 +1159,8 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn) dev->vendor = l & 0xffff; dev->device = (l >> 16) & 0xffff; + pci_set_of_node(dev); + if (pci_setup_device(dev)) { kfree(dev); return NULL; @@ -1409,6 +1413,7 @@ struct pci_bus * pci_create_bus(struct device *parent, goto dev_reg_err; b->bridge = get_device(dev); device_enable_async_suspend(b->bridge); + pci_set_bus_of_node(b); if (!parent) set_dev_node(b->bridge, pcibus_to_node(b)); |