11 files changed, 1056 insertions, 36 deletions

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 6327536b4900..e48e0da5a884 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_MMP)		+= mmp/
 endif
 obj-$(CONFIG_MACH_LOONGSON1)	+= clk-ls1x.o
 obj-$(CONFIG_ARCH_U8500)	+= ux500/
+obj-$(CONFIG_ARCH_VT8500)	+= clk-vt8500.o
 
 # Chip specific
 obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c
new file mode 100644
index 000000000000..a885600f5270
--- /dev/null
+++ b/drivers/clk/clk-vt8500.c
@@ -0,0 +1,510 @@
+/*
+ * Clock implementation for VIA/Wondermedia SoC's
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+
+/* All clocks share the same lock as none can be changed concurrently */
+static DEFINE_SPINLOCK(_lock);
+
+struct clk_device {
+	struct clk_hw	hw;
+	void __iomem	*div_reg;
+	unsigned int	div_mask;
+	void __iomem	*en_reg;
+	int		en_bit;
+	spinlock_t	*lock;
+};
+
+/*
+ * Add new PLL_TYPE_x definitions here as required. Use the first known model
+ * to support the new type as the name.
+ * Add case statements to vtwm_pll_recalc_rate(), vtwm_pll_round_round() and
+ * vtwm_pll_set_rate() to handle the new PLL_TYPE_x
+ */
+
+#define PLL_TYPE_VT8500		0
+#define PLL_TYPE_WM8650		1
+
+struct clk_pll {
+	struct clk_hw	hw;
+	void __iomem	*reg;
+	spinlock_t	*lock;
+	int		type;
+};
+
+static void __iomem *pmc_base;
+
+#define to_clk_device(_hw) container_of(_hw, struct clk_device, hw)
+
+#define VT8500_PMC_BUSY_MASK		0x18
+
+static void vt8500_pmc_wait_busy(void)
+{
+	while (readl(pmc_base) & VT8500_PMC_BUSY_MASK)
+		cpu_relax();
+}
+
+static int vt8500_dclk_enable(struct clk_hw *hw)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 en_val;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	en_val = readl(cdev->en_reg);
+	en_val |= BIT(cdev->en_bit);
+	writel(en_val, cdev->en_reg);
+
+	spin_unlock_irqrestore(cdev->lock, flags);
+	return 0;
+}
+
+static void vt8500_dclk_disable(struct clk_hw *hw)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 en_val;
+	unsigned long flags = 0;
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	en_val = readl(cdev->en_reg);
+	en_val &= ~BIT(cdev->en_bit);
+	writel(en_val, cdev->en_reg);
+
+	spin_unlock_irqrestore(cdev->lock, flags);
+}
+
+static int vt8500_dclk_is_enabled(struct clk_hw *hw)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 en_val = (readl(cdev->en_reg) & BIT(cdev->en_bit));
+
+	return en_val ? 1 : 0;
+}
+
+static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 div = readl(cdev->div_reg) & cdev->div_mask;
+
+	/* Special case for SDMMC devices */
+	if ((cdev->div_mask == 0x3F) && (div & BIT(5)))
+		div = 64 * (div & 0x1f);
+
+	/* div == 0 is actually the highest divisor */
+	if (div == 0)
+		div = (cdev->div_mask + 1);
+
+	return parent_rate / div;
+}
+
+static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	u32 divisor = *prate / rate;
+
+	return *prate / divisor;
+}
+
+static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_device *cdev = to_clk_device(hw);
+	u32 divisor = parent_rate / rate;
+	unsigned long flags = 0;
+
+	if (divisor == cdev->div_mask + 1)
+		divisor = 0;
+
+	if (divisor > cdev->div_mask) {
+		pr_err("%s: invalid divisor for clock\n", __func__);
+		return -EINVAL;
+	}
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	vt8500_pmc_wait_busy();
+	writel(divisor, cdev->div_reg);
+	vt8500_pmc_wait_busy();
+
+	spin_lock_irqsave(cdev->lock, flags);
+
+	return 0;
+}
+
+
+static const struct clk_ops vt8500_gated_clk_ops = {
+	.enable = vt8500_dclk_enable,
+	.disable = vt8500_dclk_disable,
+	.is_enabled = vt8500_dclk_is_enabled,
+};
+
+static const struct clk_ops vt8500_divisor_clk_ops = {
+	.round_rate = vt8500_dclk_round_rate,
+	.set_rate = vt8500_dclk_set_rate,
+	.recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+static const struct clk_ops vt8500_gated_divisor_clk_ops = {
+	.enable = vt8500_dclk_enable,
+	.disable = vt8500_dclk_disable,
+	.is_enabled = vt8500_dclk_is_enabled,
+	.round_rate = vt8500_dclk_round_rate,
+	.set_rate = vt8500_dclk_set_rate,
+	.recalc_rate = vt8500_dclk_recalc_rate,
+};
+
+#define CLK_INIT_GATED			BIT(0)
+#define CLK_INIT_DIVISOR		BIT(1)
+#define CLK_INIT_GATED_DIVISOR		(CLK_INIT_DIVISOR | CLK_INIT_GATED)
+
+static __init void vtwm_device_clk_init(struct device_node *node)
+{
+	u32 en_reg, div_reg;
+	struct clk *clk;
+	struct clk_device *dev_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+	int clk_init_flags = 0;
+
+	dev_clk = kzalloc(sizeof(*dev_clk), GFP_KERNEL);
+	if (WARN_ON(!dev_clk))
+		return;
+
+	dev_clk->lock = &_lock;
+
+	rc = of_property_read_u32(node, "enable-reg", &en_reg);
+	if (!rc) {
+		dev_clk->en_reg = pmc_base + en_reg;
+		rc = of_property_read_u32(node, "enable-bit", &dev_clk->en_bit);
+		if (rc) {
+			pr_err("%s: enable-bit property required for gated clock\n",
+								__func__);
+			return;
+		}
+		clk_init_flags |= CLK_INIT_GATED;
+	}
+
+	rc = of_property_read_u32(node, "divisor-reg", &div_reg);
+	if (!rc) {
+		dev_clk->div_reg = pmc_base + div_reg;
+		/*
+		 * use 0x1f as the default mask since it covers
+		 * almost all the clocks and reduces dts properties
+		 */
+		dev_clk->div_mask = 0x1f;
+
+		of_property_read_u32(node, "divisor-mask", &dev_clk->div_mask);
+		clk_init_flags |= CLK_INIT_DIVISOR;
+	}
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	switch (clk_init_flags) {
+	case CLK_INIT_GATED:
+		init.ops = &vt8500_gated_clk_ops;
+		break;
+	case CLK_INIT_DIVISOR:
+		init.ops = &vt8500_divisor_clk_ops;
+		break;
+	case CLK_INIT_GATED_DIVISOR:
+		init.ops = &vt8500_gated_divisor_clk_ops;
+		break;
+	default:
+		pr_err("%s: Invalid clock description in device tree\n",
+								__func__);
+		kfree(dev_clk);
+		return;
+	}
+
+	init.name = clk_name;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	dev_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &dev_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(dev_clk);
+		return;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* PLL clock related functions */
+
+#define to_clk_pll(_hw) container_of(_hw, struct clk_pll, hw)
+
+/* Helper macros for PLL_VT8500 */
+#define VT8500_PLL_MUL(x)	((x & 0x1F) << 1)
+#define VT8500_PLL_DIV(x)	((x & 0x100) ? 1 : 2)
+
+#define VT8500_BITS_TO_FREQ(r, m, d)					\
+				((r / d) * m)
+
+#define VT8500_BITS_TO_VAL(m, d)					\
+				((d == 2 ? 0 : 0x100) | ((m >> 1) & 0x1F))
+
+/* Helper macros for PLL_WM8650 */
+#define WM8650_PLL_MUL(x)	(x & 0x3FF)
+#define WM8650_PLL_DIV(x)	(((x >> 10) & 7) * (1 << ((x >> 13) & 3)))
+
+#define WM8650_BITS_TO_FREQ(r, m, d1, d2)				\
+				(r * m / (d1 * (1 << d2)))
+
+#define WM8650_BITS_TO_VAL(m, d1, d2)					\
+				((d2 << 13) | (d1 << 10) | (m & 0x3FF))
+
+
+static void vt8500_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+				u32 *multiplier, u32 *prediv)
+{
+	unsigned long tclk;
+
+	/* sanity check */
+	if ((rate < parent_rate * 4) || (rate > parent_rate * 62)) {
+		pr_err("%s: requested rate out of range\n", __func__);
+		*multiplier = 0;
+		*prediv = 1;
+		return;
+	}
+	if (rate <= parent_rate * 31)
+		/* use the prediv to double the resolution */
+		*prediv = 2;
+	else
+		*prediv = 1;
+
+	*multiplier = rate / (parent_rate / *prediv);
+	tclk = (parent_rate / *prediv) * *multiplier;
+
+	if (tclk != rate)
+		pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,
+								rate, tclk);
+}
+
+static void wm8650_find_pll_bits(unsigned long rate, unsigned long parent_rate,
+				u32 *multiplier, u32 *divisor1, u32 *divisor2)
+{
+	u32 mul, div1, div2;
+	u32 best_mul, best_div1, best_div2;
+	unsigned long tclk, rate_err, best_err;
+
+	best_err = (unsigned long)-1;
+
+	/* Find the closest match (lower or equal to requested) */
+	for (div1 = 5; div1 >= 3; div1--)
+		for (div2 = 3; div2 >= 0; div2--)
+			for (mul = 3; mul <= 1023; mul++) {
+				tclk = parent_rate * mul / (div1 * (1 << div2));
+				if (tclk > rate)
+					continue;
+				/* error will always be +ve */
+				rate_err = rate - tclk;
+				if (rate_err == 0) {
+					*multiplier = mul;
+					*divisor1 = div1;
+					*divisor2 = div2;
+					return;
+				}
+
+				if (rate_err < best_err) {
+					best_err = rate_err;
+					best_mul = mul;
+					best_div1 = div1;
+					best_div2 = div2;
+				}
+			}
+
+	/* if we got here, it wasn't an exact match */
+	pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,
+							rate - best_err);
+	*multiplier = mul;
+	*divisor1 = div1;
+	*divisor2 = div2;
+}
+
+static int vtwm_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 mul, div1, div2;
+	u32 pll_val;
+	unsigned long flags = 0;
+
+	/* sanity check */
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		vt8500_find_pll_bits(rate, parent_rate, &mul, &div1);
+		pll_val = VT8500_BITS_TO_VAL(mul, div1);
+		break;
+	case PLL_TYPE_WM8650:
+		wm8650_find_pll_bits(rate, parent_rate, &mul, &div1, &div2);
+		pll_val = WM8650_BITS_TO_VAL(mul, div1, div2);
+		break;
+	default:
+		pr_err("%s: invalid pll type\n", __func__);
+		return 0;
+	}
+
+	spin_lock_irqsave(pll->lock, flags);
+
+	vt8500_pmc_wait_busy();
+	writel(pll_val, pll->reg);
+	vt8500_pmc_wait_busy();
+
+	spin_unlock_irqrestore(pll->lock, flags);
+
+	return 0;
+}
+
+static long vtwm_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 mul, div1, div2;
+	long round_rate;
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		vt8500_find_pll_bits(rate, *prate, &mul, &div1);
+		round_rate = VT8500_BITS_TO_FREQ(*prate, mul, div1);
+		break;
+	case PLL_TYPE_WM8650:
+		wm8650_find_pll_bits(rate, *prate, &mul, &div1, &div2);
+		round_rate = WM8650_BITS_TO_FREQ(*prate, mul, div1, div2);
+		break;
+	default:
+		round_rate = 0;
+	}
+
+	return round_rate;
+}
+
+static unsigned long vtwm_pll_recalc_rate(struct clk_hw *hw,
+				unsigned long parent_rate)
+{
+	struct clk_pll *pll = to_clk_pll(hw);
+	u32 pll_val = readl(pll->reg);
+	unsigned long pll_freq;
+
+	switch (pll->type) {
+	case PLL_TYPE_VT8500:
+		pll_freq = parent_rate * VT8500_PLL_MUL(pll_val);
+		pll_freq /= VT8500_PLL_DIV(pll_val);
+		break;
+	case PLL_TYPE_WM8650:
+		pll_freq = parent_rate * WM8650_PLL_MUL(pll_val);
+		pll_freq /= WM8650_PLL_DIV(pll_val);
+		break;
+	default:
+		pll_freq = 0;
+	}
+
+	return pll_freq;
+}
+
+const struct clk_ops vtwm_pll_ops = {
+	.round_rate = vtwm_pll_round_rate,
+	.set_rate = vtwm_pll_set_rate,
+	.recalc_rate = vtwm_pll_recalc_rate,
+};
+
+static __init void vtwm_pll_clk_init(struct device_node *node, int pll_type)
+{
+	u32 reg;
+	struct clk *clk;
+	struct clk_pll *pll_clk;
+	const char *clk_name = node->name;
+	const char *parent_name;
+	struct clk_init_data init;
+	int rc;
+
+	rc = of_property_read_u32(node, "reg", &reg);
+	if (WARN_ON(rc))
+		return;
+
+	pll_clk = kzalloc(sizeof(*pll_clk), GFP_KERNEL);
+	if (WARN_ON(!pll_clk))
+		return;
+
+	pll_clk->reg = pmc_base + reg;
+	pll_clk->lock = &_lock;
+	pll_clk->type = pll_type;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	init.name = clk_name;
+	init.ops = &vtwm_pll_ops;
+	init.flags = 0;
+	parent_name = of_clk_get_parent_name(node, 0);
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	pll_clk->hw.init = &init;
+
+	clk = clk_register(NULL, &pll_clk->hw);
+	if (WARN_ON(IS_ERR(clk))) {
+		kfree(pll_clk);
+		return;
+	}
+	rc = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+	clk_register_clkdev(clk, clk_name, NULL);
+}
+
+
+/* Wrappers for initialization functions */
+
+static void __init vt8500_pll_init(struct device_node *node)
+{
+	vtwm_pll_clk_init(node, PLL_TYPE_VT8500);
+}
+
+static void __init wm8650_pll_init(struct device_node *node)
+{
+	vtwm_pll_clk_init(node, PLL_TYPE_WM8650);
+}
+
+static const __initconst struct of_device_id clk_match[] = {
+	{ .compatible = "fixed-clock", .data = of_fixed_clk_setup, },
+	{ .compatible = "via,vt8500-pll-clock", .data = vt8500_pll_init, },
+	{ .compatible = "wm,wm8650-pll-clock", .data = wm8650_pll_init, },
+	{ .compatible = "via,vt8500-device-clock",
+					.data = vtwm_device_clk_init, },
+	{ /* sentinel */ }
+};
+
+void __init vtwm_clk_init(void __iomem *base)
+{
+	if (!base)
+		return;
+
+	pmc_base = base;
+
+	of_clk_init(clk_match);
+}
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index ba7926f5c099..a00b828b1643 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -183,6 +183,12 @@ config GPIO_STA2X11
 	  Say yes here to support the STA2x11/ConneXt GPIO device.
 	  The GPIO module has 128 GPIO pins with alternate functions.
 
+config GPIO_VT8500
+	bool "VIA/Wondermedia SoC GPIO Support"
+	depends on ARCH_VT8500
+	help
+	  Say yes here to support the VT8500/WM8505/WM8650 GPIO controller.
+
 config GPIO_XILINX
 	bool "Xilinx GPIO support"
 	depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 153caceeb053..a288142ad998 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -69,6 +69,7 @@ obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
 obj-$(CONFIG_GPIO_UCB1400)	+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_VR41XX)	+= gpio-vr41xx.o
+obj-$(CONFIG_GPIO_VT8500)	+= gpio-vt8500.o
 obj-$(CONFIG_GPIO_VX855)	+= gpio-vx855.o
 obj-$(CONFIG_GPIO_WM831X)	+= gpio-wm831x.o
 obj-$(CONFIG_GPIO_WM8350)	+= gpio-wm8350.o
diff --git a/drivers/gpio/gpio-vt8500.c b/drivers/gpio/gpio-vt8500.c
new file mode 100644
index 000000000000..bcd8e4aa7c7d
--- /dev/null
+++ b/drivers/gpio/gpio-vt8500.c
@@ -0,0 +1,316 @@
+/* drivers/gpio/gpio-vt8500.c
+ *
+ * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ * Based on arch/arm/mach-vt8500/gpio.c:
+ * - Copyright (C) 2010 Alexey Charkov <alchark@gmail.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+
+/*
+	We handle GPIOs by bank, each bank containing up to 32 GPIOs covered
+	by one set of registers (although not all may be valid).
+
+	Because different SoC's have different register offsets, we pass the
+	register offsets as data in vt8500_gpio_dt_ids[].
+
+	A value of NO_REG is used to indicate that this register is not
+	supported. Only used for ->en at the moment.
+*/
+
+#define NO_REG	0xFFFF
+
+/*
+ * struct vt8500_gpio_bank_regoffsets
+ * @en: offset to enable register of the bank
+ * @dir: offset to direction register of the bank
+ * @data_out: offset to the data out register of the bank
+ * @data_in: offset to the data in register of the bank
+ * @ngpio: highest valid pin in this bank
+ */
+
+struct vt8500_gpio_bank_regoffsets {
+	unsigned int	en;
+	unsigned int	dir;
+	unsigned int	data_out;
+	unsigned int	data_in;
+	unsigned char	ngpio;
+};
+
+struct vt8500_gpio_data {
+	unsigned int				num_banks;
+	struct vt8500_gpio_bank_regoffsets	banks[];
+};
+
+#define VT8500_BANK(__en, __dir, __out, __in, __ngpio)		\
+{								\
+	.en = __en,						\
+	.dir = __dir,						\
+	.data_out = __out,					\
+	.data_in = __in,					\
+	.ngpio = __ngpio,					\
+}
+
+static struct vt8500_gpio_data vt8500_data = {
+	.num_banks	= 7,
+	.banks	= {
+		VT8500_BANK(0x00, 0x20, 0x40, 0x60, 26),
+		VT8500_BANK(0x04, 0x24, 0x44, 0x64, 28),
+		VT8500_BANK(0x08, 0x28, 0x48, 0x68, 31),
+		VT8500_BANK(0x0C, 0x2C, 0x4C, 0x6C, 19),
+		VT8500_BANK(0x10, 0x30, 0x50, 0x70, 19),
+		VT8500_BANK(0x14, 0x34, 0x54, 0x74, 23),
+		VT8500_BANK(NO_REG, 0x3C, 0x5C, 0x7C, 9),
+	},
+};
+
+static struct vt8500_gpio_data wm8505_data = {
+	.num_banks	= 10,
+	.banks	= {
+		VT8500_BANK(0x40, 0x68, 0x90, 0xB8, 8),
+		VT8500_BANK(0x44, 0x6C, 0x94, 0xBC, 32),
+		VT8500_BANK(0x48, 0x70, 0x98, 0xC0, 6),
+		VT8500_BANK(0x4C, 0x74, 0x9C, 0xC4, 16),
+		VT8500_BANK(0x50, 0x78, 0xA0, 0xC8, 25),
+		VT8500_BANK(0x54, 0x7C, 0xA4, 0xCC, 5),
+		VT8500_BANK(0x58, 0x80, 0xA8, 0xD0, 5),
+		VT8500_BANK(0x5C, 0x84, 0xAC, 0xD4, 12),
+		VT8500_BANK(0x60, 0x88, 0xB0, 0xD8, 16),
+		VT8500_BANK(0x64, 0x8C, 0xB4, 0xDC, 22),
+	},
+};
+
+/*
+ * No information about which bits are valid so we just make
+ * them all available until its figured out.
+ */
+static struct vt8500_gpio_data wm8650_data = {
+	.num_banks	= 9,
+	.banks	= {
+		VT8500_BANK(0x40, 0x80, 0xC0, 0x00, 32),
+		VT8500_BANK(0x44, 0x84, 0xC4, 0x04, 32),
+		VT8500_BANK(0x48, 0x88, 0xC8, 0x08, 32),
+		VT8500_BANK(0x4C, 0x8C, 0xCC, 0x0C, 32),
+		VT8500_BANK(0x50, 0x90, 0xD0, 0x10, 32),
+		VT8500_BANK(0x54, 0x94, 0xD4, 0x14, 32),
+		VT8500_BANK(0x58, 0x98, 0xD8, 0x18, 32),
+		VT8500_BANK(0x5C, 0x9C, 0xDC, 0x1C, 32),
+		VT8500_BANK(0x7C, 0xBC, 0xFC, 0x3C, 32),
+	},
+};
+
+struct vt8500_gpio_chip {
+	struct gpio_chip		chip;
+
+	const struct vt8500_gpio_bank_regoffsets *regs;
+	void __iomem	*base;
+};
+
+
+#define to_vt8500(__chip) container_of(__chip, struct vt8500_gpio_chip, chip)
+
+static int vt8500_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+	u32 val;
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	if (vt8500_chip->regs->en == NO_REG)
+		return 0;
+
+	val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
+	val |= BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
+
+	return 0;
+}
+
+static void vt8500_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+	u32 val;
+
+	if (vt8500_chip->regs->en == NO_REG)
+		return;
+
+	val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->en);
+	val &= ~BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->en);
+}
+
+static int vt8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
+	val &= ~BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
+
+	return 0;
+}
+
+static int vt8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+								int value)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base + vt8500_chip->regs->dir);
+	val |= BIT(offset);
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->dir);
+
+	if (value) {
+		val = readl_relaxed(vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+		val |= BIT(offset);
+		writel_relaxed(val, vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+	}
+	return 0;
+}
+
+static int vt8500_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	return (readl_relaxed(vt8500_chip->base + vt8500_chip->regs->data_in) >>
+								offset) & 1;
+}
+
+static void vt8500_gpio_set_value(struct gpio_chip *chip, unsigned offset,
+								int value)
+{
+	struct vt8500_gpio_chip *vt8500_chip = to_vt8500(chip);
+
+	u32 val = readl_relaxed(vt8500_chip->base +
+						vt8500_chip->regs->data_out);
+	if (value)
+		val |= BIT(offset);
+	else
+		val &= ~BIT(offset);
+
+	writel_relaxed(val, vt8500_chip->base + vt8500_chip->regs->data_out);
+}
+
+static int vt8500_of_xlate(struct gpio_chip *gc,
+			    const struct of_phandle_args *gpiospec, u32 *flags)
+{
+	/* bank if specificed in gpiospec->args[0] */
+	if (flags)
+		*flags = gpiospec->args[2];
+
+	return gpiospec->args[1];
+}
+
+static int vt8500_add_chips(struct platform_device *pdev, void __iomem *base,
+				const struct vt8500_gpio_data *data)
+{
+	struct vt8500_gpio_chip *vtchip;
+	struct gpio_chip *chip;
+	int i;
+	int pin_cnt = 0;
+
+	vtchip = devm_kzalloc(&pdev->dev,
+			sizeof(struct vt8500_gpio_chip) * data->num_banks,
+			GFP_KERNEL);
+	if (!vtchip) {
+		pr_err("%s: failed to allocate chip memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < data->num_banks; i++) {
+		vtchip[i].base = base;
+		vtchip[i].regs = &data->banks[i];
+
+		chip = &vtchip[i].chip;
+
+		chip->of_xlate = vt8500_of_xlate;
+		chip->of_gpio_n_cells = 3;
+		chip->of_node = pdev->dev.of_node;
+
+		chip->request = vt8500_gpio_request;
+		chip->free = vt8500_gpio_free;
+		chip->direction_input = vt8500_gpio_direction_input;
+		chip->direction_output = vt8500_gpio_direction_output;
+		chip->get = vt8500_gpio_get_value;
+		chip->set = vt8500_gpio_set_value;
+		chip->can_sleep = 0;
+		chip->base = pin_cnt;
+		chip->ngpio = data->banks[i].ngpio;
+
+		pin_cnt += data->banks[i].ngpio;
+
+		gpiochip_add(chip);
+	}
+	return 0;
+}
+
+static struct of_device_id vt8500_gpio_dt_ids[] = {
+	{ .compatible = "via,vt8500-gpio", .data = &vt8500_data, },
+	{ .compatible = "wm,wm8505-gpio", .data = &wm8505_data, },
+	{ .compatible = "wm,wm8650-gpio", .data = &wm8650_data, },
+	{ /* Sentinel */ },
+};
+
+static int __devinit vt8500_gpio_probe(struct platform_device *pdev)
+{
+	void __iomem *gpio_base;
+	struct device_node *np;
+	const struct of_device_id *of_id =
+				of_match_device(vt8500_gpio_dt_ids, &pdev->dev);
+
+	if (!of_id) {
+		dev_err(&pdev->dev, "Failed to find gpio controller\n");
+		return -ENODEV;
+	}
+
+	np = pdev->dev.of_node;
+	if (!np) {
+		dev_err(&pdev->dev, "Missing GPIO description in devicetree\n");
+		return -EFAULT;
+	}
+
+	gpio_base = of_iomap(np, 0);
+	if (!gpio_base) {
+		dev_err(&pdev->dev, "Unable to map GPIO registers\n");
+		of_node_put(np);
+		return -ENOMEM;
+	}
+
+	vt8500_add_chips(pdev, gpio_base, of_id->data);
+
+	return 0;
+}
+
+static struct platform_driver vt8500_gpio_driver = {
+	.probe		= vt8500_gpio_probe,
+	.driver		= {
+		.name	= "vt8500-gpio",
+		.owner	= THIS_MODULE,
+		.of_match_table = vt8500_gpio_dt_ids,
+	},
+};
+
+module_platform_driver(vt8500_gpio_driver);
+
+MODULE_DESCRIPTION("VT8500 GPIO Driver");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, vt8500_gpio_dt_ids);
diff --git a/drivers/rtc/rtc-vt8500.c b/drivers/rtc/rtc-vt8500.c
index 9e94fb147c26..07bf19364a74 100644
--- a/drivers/rtc/rtc-vt8500.c
+++ b/drivers/rtc/rtc-vt8500.c
@@ -23,6 +23,7 @@
 #include <linux/bcd.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /*
  * Register definitions
@@ -302,12 +303,18 @@ static int __devexit vt8500_rtc_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "via,vt8500-rtc", },
+	{}
+};
+
 static struct platform_driver vt8500_rtc_driver = {
 	.probe		= vt8500_rtc_probe,
 	.remove		= __devexit_p(vt8500_rtc_remove),
 	.driver		= {
 		.name	= "vt8500-rtc",
 		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -315,5 +322,5 @@ module_platform_driver(vt8500_rtc_driver);
 
 MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
 MODULE_DESCRIPTION("VIA VT8500 SoC Realtime Clock Driver (RTC)");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:vt8500-rtc");
diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c
index 2be006fb3da0..205d4cf4a063 100644
--- a/drivers/tty/serial/vt8500_serial.c
+++ b/drivers/tty/serial/vt8500_serial.c
@@ -34,6 +34,7 @@
 #include <linux/slab.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/of.h>
 
 /*
  * UART Register offsets
@@ -76,6 +77,8 @@
 #define RX_FIFO_INTS	(RXFAF | RXFF | RXOVER | PER | FER | RXTOUT)
 #define TX_FIFO_INTS	(TXFAE | TXFE | TXUDR)
 
+#define VT8500_MAX_PORTS	6
+
 struct vt8500_port {
 	struct uart_port	uart;
 	char			name[16];
@@ -83,6 +86,13 @@ struct vt8500_port {
 	unsigned int		ier;
 };
 
+/*
+ * we use this variable to keep track of which ports
+ * have been allocated as we can't use pdev->id in
+ * devicetree
+ */
+static unsigned long vt8500_ports_in_use;
+
 static inline void vt8500_write(struct uart_port *port, unsigned int val,
 			     unsigned int off)
 {
@@ -431,7 +441,7 @@ static int vt8500_verify_port(struct uart_port *port,
 	return 0;
 }
 
-static struct vt8500_port *vt8500_uart_ports[4];
+static struct vt8500_port *vt8500_uart_ports[VT8500_MAX_PORTS];
 static struct uart_driver vt8500_uart_driver;
 
 #ifdef CONFIG_SERIAL_VT8500_CONSOLE
@@ -548,7 +558,9 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 {
 	struct vt8500_port *vt8500_port;
 	struct resource *mmres, *irqres;
+	struct device_node *np = pdev->dev.of_node;
 	int ret;
+	int port;
 
 	mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -559,16 +571,46 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 	if (!vt8500_port)
 		return -ENOMEM;
 
+	if (np)
+		port = of_alias_get_id(np, "serial");
+		if (port > VT8500_MAX_PORTS)
+			port = -1;
+	else
+		port = -1;
+
+	if (port < 0) {
+		/* calculate the port id */
+		port = find_first_zero_bit(&vt8500_ports_in_use,
+					sizeof(vt8500_ports_in_use));
+	}
+
+	if (port > VT8500_MAX_PORTS)
+		return -ENODEV;
+
+	/* reserve the port id */
+	if (test_and_set_bit(port, &vt8500_ports_in_use)) {
+		/* port already in use - shouldn't really happen */
+		return -EBUSY;
+	}
+
 	vt8500_port->uart.type = PORT_VT8500;
 	vt8500_port->uart.iotype = UPIO_MEM;
 	vt8500_port->uart.mapbase = mmres->start;
 	vt8500_port->uart.irq = irqres->start;
 	vt8500_port->uart.fifosize = 16;
 	vt8500_port->uart.ops = &vt8500_uart_pops;
-	vt8500_port->uart.line = pdev->id;
+	vt8500_port->uart.line = port;
 	vt8500_port->uart.dev = &pdev->dev;
 	vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
-	vt8500_port->uart.uartclk = 24000000;
+
+	vt8500_port->clk = of_clk_get(pdev->dev.of_node, 0);
+	if (vt8500_port->clk) {
+		vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk);
+	} else {
+		/* use the default of 24Mhz if not specified and warn */
+		pr_warn("%s: serial clock source not specified\n", __func__);
+		vt8500_port->uart.uartclk = 24000000;
+	}
 
 	snprintf(vt8500_port->name, sizeof(vt8500_port->name),
 		 "VT8500 UART%d", pdev->id);
@@ -579,7 +621,7 @@ static int __devinit vt8500_serial_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	vt8500_uart_ports[pdev->id] = vt8500_port;
+	vt8500_uart_ports[port] = vt8500_port;
 
 	uart_add_one_port(&vt8500_uart_driver, &vt8500_port->uart);
 
@@ -603,12 +645,18 @@ static int __devexit vt8500_serial_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "via,vt8500-uart", },
+	{}
+};
+
 static struct platform_driver vt8500_platform_driver = {
 	.probe  = vt8500_serial_probe,
 	.remove = __devexit_p(vt8500_serial_remove),
 	.driver = {
 		.name = "vt8500_serial",
 		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -642,4 +690,4 @@ module_exit(vt8500_serial_exit);
 
 MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
 MODULE_DESCRIPTION("Driver for vt8500 serial device");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 0217f7415ef5..b66d951b8e32 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1788,7 +1788,7 @@ config FB_AU1200
 
 config FB_VT8500
 	bool "VT8500 LCD Driver"
-	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_VT8500
+	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_WMT_GE_ROPS
 	select FB_SYS_IMAGEBLIT
 	help
@@ -1797,11 +1797,11 @@ config FB_VT8500
 
 config FB_WM8505
 	bool "WM8505 frame buffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500 && VTWM_VERSION_WM8505
+	depends on (FB = y) && ARM && ARCH_VT8500
 	select FB_WMT_GE_ROPS
 	select FB_SYS_IMAGEBLIT
 	help
-	  This is the framebuffer driver for WonderMedia WM8505
+	  This is the framebuffer driver for WonderMedia WM8505/WM8650
 	  integrated LCD controller.
 
 source "drivers/video/geode/Kconfig"
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/vt8500lcdfb.c
index 2a5fe6ede845..d24595cd0c9b 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/vt8500lcdfb.c
@@ -35,6 +35,13 @@
 #include "vt8500lcdfb.h"
 #include "wmt_ge_rops.h"
 
+#ifdef CONFIG_OF
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
+#endif
+
+
 #define to_vt8500lcd_info(__info) container_of(__info, \
 						struct vt8500lcd_info, fb)
 
@@ -270,15 +277,21 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 {
 	struct vt8500lcd_info *fbi;
 	struct resource *res;
-	struct vt8500fb_platform_data *pdata = pdev->dev.platform_data;
 	void *addr;
 	int irq, ret;
 
+	struct fb_videomode	of_mode;
+	struct device_node	*np;
+	u32			bpp;
+	dma_addr_t fb_mem_phys;
+	unsigned long fb_mem_len;
+	void *fb_mem_virt;
+
 	ret = -ENOMEM;
 	fbi = NULL;
 
-	fbi = kzalloc(sizeof(struct vt8500lcd_info) + sizeof(u32) * 16,
-							GFP_KERNEL);
+	fbi = devm_kzalloc(&pdev->dev, sizeof(struct vt8500lcd_info)
+			+ sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
 		ret = -ENOMEM;
@@ -333,9 +346,45 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
-	fbi->fb.fix.smem_len	= pdata->video_mem_len;
-	fbi->fb.screen_base	= pdata->video_mem_virt;
+	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
+	if (!np) {
+		pr_err("%s: No display description in Device Tree\n", __func__);
+		ret = -EINVAL;
+		goto failed_free_res;
+	}
+
+	/*
+	 * This code is copied from Sascha Hauer's of_videomode helper
+	 * and can be replaced with a call to the helper once mainlined
+	 */
+	ret = 0;
+	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
+	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
+	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
+	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
+	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
+	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
+	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
+	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
+	ret |= of_property_read_u32(np, "bpp", &bpp);
+	if (ret) {
+		pr_err("%s: Unable to read display properties\n", __func__);
+		goto failed_free_res;
+	}
+	of_mode.vmode = FB_VMODE_NONINTERLACED;
+
+	/* try allocating the framebuffer */
+	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+				GFP_KERNEL);
+	if (!fb_mem_virt) {
+		pr_err("%s: Failed to allocate framebuffer\n", __func__);
+		return -ENOMEM;
+	};
+
+	fbi->fb.fix.smem_start	= fb_mem_phys;
+	fbi->fb.fix.smem_len	= fb_mem_len;
+	fbi->fb.screen_base	= fb_mem_virt;
 
 	fbi->palette_size	= PAGE_ALIGN(512);
 	fbi->palette_cpu	= dma_alloc_coherent(&pdev->dev,
@@ -370,10 +419,11 @@ static int __devinit vt8500lcd_probe(struct platform_device *pdev)
 		goto failed_free_irq;
 	}
 
-	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
-	fbi->fb.var.bits_per_pixel	= pdata->bpp;
-	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
-	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
+	fb_videomode_to_var(&fbi->fb.var, &of_mode);
+
+	fbi->fb.var.xres_virtual	= of_mode.xres;
+	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.bits_per_pixel	= bpp;
 
 	ret = vt8500lcd_set_par(&fbi->fb);
 	if (ret) {
@@ -448,12 +498,18 @@ static int __devexit vt8500lcd_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id via_dt_ids[] = {
+	{ .compatible = "via,vt8500-fb", },
+	{}
+};
+
 static struct platform_driver vt8500lcd_driver = {
 	.probe		= vt8500lcd_probe,
 	.remove		= __devexit_p(vt8500lcd_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "vt8500-lcd",
+		.of_match_table = of_match_ptr(via_dt_ids),
 	},
 };
 
@@ -461,4 +517,5 @@ module_platform_driver(vt8500lcd_driver);
 
 MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com>");
 MODULE_DESCRIPTION("LCD controller driver for VIA VT8500");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, via_dt_ids);
diff --git a/drivers/video/wm8505fb.c b/drivers/video/wm8505fb.c
index c8703bd61b74..ec4742442103 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/wm8505fb.c
@@ -28,6 +28,9 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/wait.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/memblock.h>
 
 #include <mach/vt8500fb.h>
 
@@ -59,8 +62,12 @@ static int wm8505fb_init_hw(struct fb_info *info)
 	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR);
 	writel(fbi->fb.fix.smem_start, fbi->regbase + WMT_GOVR_FBADDR1);
 
-	/* Set in-memory picture format to RGB 32bpp */
-	writel(0x1c,		       fbi->regbase + WMT_GOVR_COLORSPACE);
+	/*
+	 * Set in-memory picture format to RGB
+	 * 0x31C sets the correct color mode (RGB565) for WM8650
+	 * Bit 8+9 (0x300) are ignored on WM8505 as reserved
+	 */
+	writel(0x31c,		       fbi->regbase + WMT_GOVR_COLORSPACE);
 	writel(1,		       fbi->regbase + WMT_GOVR_COLORSPACE1);
 
 	/* Virtual buffer size */
@@ -127,6 +134,18 @@ static int wm8505fb_set_par(struct fb_info *info)
 		info->var.blue.msb_right = 0;
 		info->fix.visual = FB_VISUAL_TRUECOLOR;
 		info->fix.line_length = info->var.xres_virtual << 2;
+	} else if (info->var.bits_per_pixel == 16) {
+		info->var.red.offset = 11;
+		info->var.red.length = 5;
+		info->var.red.msb_right = 0;
+		info->var.green.offset = 5;
+		info->var.green.length = 6;
+		info->var.green.msb_right = 0;
+		info->var.blue.offset = 0;
+		info->var.blue.length = 5;
+		info->var.blue.msb_right = 0;
+		info->fix.visual = FB_VISUAL_TRUECOLOR;
+		info->fix.line_length = info->var.xres_virtual << 1;
 	}
 
 	wm8505fb_set_timing(info);
@@ -246,16 +265,20 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
 	struct wm8505fb_info	*fbi;
 	struct resource		*res;
 	void			*addr;
-	struct vt8500fb_platform_data *pdata;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
+	struct fb_videomode	of_mode;
+	struct device_node	*np;
+	u32			bpp;
+	dma_addr_t fb_mem_phys;
+	unsigned long fb_mem_len;
+	void *fb_mem_virt;
 
 	ret = -ENOMEM;
 	fbi = NULL;
 
-	fbi = kzalloc(sizeof(struct wm8505fb_info) + sizeof(u32) * 16,
-							GFP_KERNEL);
+	fbi = devm_kzalloc(&pdev->dev, sizeof(struct wm8505fb_info) +
+			sizeof(u32) * 16, GFP_KERNEL);
 	if (!fbi) {
 		dev_err(&pdev->dev, "Failed to initialize framebuffer device\n");
 		ret = -ENOMEM;
@@ -305,21 +328,58 @@ static int __devinit wm8505fb_probe(struct platform_device *pdev)
 		goto failed_free_res;
 	}
 
-	fb_videomode_to_var(&fbi->fb.var, &pdata->mode);
+	np = of_parse_phandle(pdev->dev.of_node, "default-mode", 0);
+	if (!np) {
+		pr_err("%s: No display description in Device Tree\n", __func__);
+		ret = -EINVAL;
+		goto failed_free_res;
+	}
+
+	/*
+	 * This code is copied from Sascha Hauer's of_videomode helper
+	 * and can be replaced with a call to the helper once mainlined
+	 */
+	ret = 0;
+	ret |= of_property_read_u32(np, "hactive", &of_mode.xres);
+	ret |= of_property_read_u32(np, "vactive", &of_mode.yres);
+	ret |= of_property_read_u32(np, "hback-porch", &of_mode.left_margin);
+	ret |= of_property_read_u32(np, "hfront-porch", &of_mode.right_margin);
+	ret |= of_property_read_u32(np, "hsync-len", &of_mode.hsync_len);
+	ret |= of_property_read_u32(np, "vback-porch", &of_mode.upper_margin);
+	ret |= of_property_read_u32(np, "vfront-porch", &of_mode.lower_margin);
+	ret |= of_property_read_u32(np, "vsync-len", &of_mode.vsync_len);
+	ret |= of_property_read_u32(np, "bpp", &bpp);
+	if (ret) {
+		pr_err("%s: Unable to read display properties\n", __func__);
+		goto failed_free_res;
+	}
+
+	of_mode.vmode = FB_VMODE_NONINTERLACED;
+	fb_videomode_to_var(&fbi->fb.var, &of_mode);
 
 	fbi->fb.var.nonstd		= 0;
 	fbi->fb.var.activate		= FB_ACTIVATE_NOW;
 
 	fbi->fb.var.height		= -1;
 	fbi->fb.var.width		= -1;
-	fbi->fb.var.xres_virtual	= pdata->xres_virtual;
-	fbi->fb.var.yres_virtual	= pdata->yres_virtual;
-	fbi->fb.var.bits_per_pixel	= pdata->bpp;
 
-	fbi->fb.fix.smem_start	= pdata->video_mem_phys;
-	fbi->fb.fix.smem_len	= pdata->video_mem_len;
-	fbi->fb.screen_base	= pdata->video_mem_virt;
-	fbi->fb.screen_size	= pdata->video_mem_len;
+	/* try allocating the framebuffer */
+	fb_mem_len = of_mode.xres * of_mode.yres * 2 * (bpp / 8);
+	fb_mem_virt = dma_alloc_coherent(&pdev->dev, fb_mem_len, &fb_mem_phys,
+				GFP_KERNEL);
+	if (!fb_mem_virt) {
+		pr_err("%s: Failed to allocate framebuffer\n", __func__);
+		return -ENOMEM;
+	};
+
+	fbi->fb.var.xres_virtual	= of_mode.xres;
+	fbi->fb.var.yres_virtual	= of_mode.yres * 2;
+	fbi->fb.var.bits_per_pixel	= bpp;
+
+	fbi->fb.fix.smem_start		= fb_mem_phys;
+	fbi->fb.fix.smem_len		= fb_mem_len;
+	fbi->fb.screen_base		= fb_mem_virt;
+	fbi->fb.screen_size		= fb_mem_len;
 
 	if (fb_alloc_cmap(&fbi->fb.cmap, 256, 0) < 0) {
 		dev_err(&pdev->dev, "Failed to allocate color map\n");
@@ -395,12 +455,18 @@ static int __devexit wm8505fb_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "wm,wm8505-fb", },
+	{}
+};
+
 static struct platform_driver wm8505fb_driver = {
 	.probe		= wm8505fb_probe,
 	.remove		= __devexit_p(wm8505fb_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= DRIVER_NAME,
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -408,4 +474,5 @@ module_platform_driver(wm8505fb_driver);
 
 MODULE_AUTHOR("Ed Spiridonov <edo.rus@gmail.com>");
 MODULE_DESCRIPTION("Framebuffer driver for WMT WM8505");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_dt_ids);
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/wmt_ge_rops.c
index 55be3865015b..ba025b4c7d09 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/wmt_ge_rops.c
@@ -158,12 +158,18 @@ static int __devexit wmt_ge_rops_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id wmt_dt_ids[] = {
+	{ .compatible = "wm,prizm-ge-rops", },
+	{ /* sentinel */ }
+};
+
 static struct platform_driver wmt_ge_rops_driver = {
 	.probe		= wmt_ge_rops_probe,
 	.remove		= __devexit_p(wmt_ge_rops_remove),
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "wmt_ge_rops",
+		.of_match_table = of_match_ptr(wmt_dt_ids),
 	},
 };
 
@@ -172,4 +178,5 @@ module_platform_driver(wmt_ge_rops_driver);
 MODULE_AUTHOR("Alexey Charkov <alchark@gmail.com");
 MODULE_DESCRIPTION("Accelerators for raster operations using "
 		   "WonderMedia Graphics Engine");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, wmt_dt_ids);