diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/net/phy/sfp-bus.c | 104 |
1 files changed, 104 insertions, 0 deletions
diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 8a1b1f4c1b7c..2b8c256156a2 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -8,7 +8,11 @@ #include "sfp.h" +/** + * struct sfp_bus - internal representation of a sfp bus + */ struct sfp_bus { + /* private: */ struct kref kref; struct list_head node; struct device_node *device_node; @@ -26,6 +30,20 @@ struct sfp_bus { bool started; }; +/** + * sfp_parse_port() - Parse the EEPROM base ID, setting the port type + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @id: a pointer to the module's &struct sfp_eeprom_id + * @support: optional pointer to an array of unsigned long for the + * ethtool support mask + * + * Parse the EEPROM identification given in @id, and return one of + * %PORT_TP, %PORT_FIBRE or %PORT_OTHER. If @support is non-%NULL, + * also set the ethtool %ETHTOOL_LINK_MODE_xxx_BIT corresponding with + * the connector type. + * + * If the port type is not known, returns %PORT_OTHER. + */ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, unsigned long *support) { @@ -78,6 +96,24 @@ int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id, } EXPORT_SYMBOL_GPL(sfp_parse_port); +/** + * sfp_parse_interface() - Parse the phy_interface_t + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @id: a pointer to the module's &struct sfp_eeprom_id + * + * Derive the phy_interface_t mode for the information found in the + * module's identifying EEPROM. There is no standard or defined way + * to derive this information, so we use some heuristics. + * + * If the encoding is 64b66b, then the module must be >= 10G, so + * return %PHY_INTERFACE_MODE_10GKR. + * + * If it's 8b10b, then it's 1G or slower. If it's definitely a fibre + * module, return %PHY_INTERFACE_MODE_1000BASEX mode, otherwise return + * %PHY_INTERFACE_MODE_SGMII mode. + * + * If the encoding is not known, return %PHY_INTERFACE_MODE_NA. + */ phy_interface_t sfp_parse_interface(struct sfp_bus *bus, const struct sfp_eeprom_id *id) { @@ -117,6 +153,15 @@ phy_interface_t sfp_parse_interface(struct sfp_bus *bus, } EXPORT_SYMBOL_GPL(sfp_parse_interface); +/** + * sfp_parse_support() - Parse the eeprom id for supported link modes + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @id: a pointer to the module's &struct sfp_eeprom_id + * @support: pointer to an array of unsigned long for the ethtool support mask + * + * Parse the EEPROM identification information and derive the supported + * ethtool link modes for the module. + */ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, unsigned long *support) { @@ -293,6 +338,16 @@ static void sfp_unregister_bus(struct sfp_bus *bus) bus->registered = false; } +/** + * sfp_get_module_info() - Get the ethtool_modinfo for a SFP module + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @modinfo: a &struct ethtool_modinfo + * + * Fill in the type and eeprom_len parameters in @modinfo for a module on + * the sfp bus specified by @bus. + * + * Returns 0 on success or a negative errno number. + */ int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) { if (!bus->registered) @@ -301,6 +356,17 @@ int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo) } EXPORT_SYMBOL_GPL(sfp_get_module_info); +/** + * sfp_get_module_eeprom() - Read the SFP module EEPROM + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * @ee: a &struct ethtool_eeprom + * @data: buffer to contain the EEPROM data (must be at least @ee->len bytes) + * + * Read the EEPROM as specified by the supplied @ee. See the documentation + * for &struct ethtool_eeprom for the region to be read. + * + * Returns 0 on success or a negative errno number. + */ int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, u8 *data) { @@ -310,6 +376,15 @@ int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee, } EXPORT_SYMBOL_GPL(sfp_get_module_eeprom); +/** + * sfp_upstream_start() - Inform the SFP that the network device is up + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * + * Inform the SFP socket that the network device is now up, so that the + * module can be enabled by allowing TX_DISABLE to be deasserted. This + * should be called from the network device driver's &struct net_device_ops + * ndo_open() method. + */ void sfp_upstream_start(struct sfp_bus *bus) { if (bus->registered) @@ -318,6 +393,15 @@ void sfp_upstream_start(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_upstream_start); +/** + * sfp_upstream_stop() - Inform the SFP that the network device is down + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * + * Inform the SFP socket that the network device is now up, so that the + * module can be disabled by asserting TX_DISABLE, disabling the laser + * in optical modules. This should be called from the network device + * driver's &struct net_device_ops ndo_stop() method. + */ void sfp_upstream_stop(struct sfp_bus *bus) { if (bus->registered) @@ -326,6 +410,19 @@ void sfp_upstream_stop(struct sfp_bus *bus) } EXPORT_SYMBOL_GPL(sfp_upstream_stop); +/** + * sfp_register_upstream() - Register the neighbouring device + * @np: device node for the SFP bus + * @ndev: network device associated with the interface + * @upstream: the upstream private data + * @ops: the upstream's &struct sfp_upstream_ops + * + * Register the upstream device (eg, PHY) with the SFP bus. MAC drivers + * should use phylink, which will call this function for them. Returns + * a pointer to the allocated &struct sfp_bus. + * + * On error, returns %NULL. + */ struct sfp_bus *sfp_register_upstream(struct device_node *np, struct net_device *ndev, void *upstream, const struct sfp_upstream_ops *ops) @@ -353,6 +450,13 @@ struct sfp_bus *sfp_register_upstream(struct device_node *np, } EXPORT_SYMBOL_GPL(sfp_register_upstream); +/** + * sfp_unregister_upstream() - Unregister sfp bus + * @bus: a pointer to the &struct sfp_bus structure for the sfp module + * + * Unregister a previously registered upstream connection for the SFP + * module. @bus is returned from sfp_register_upstream(). + */ void sfp_unregister_upstream(struct sfp_bus *bus) { rtnl_lock(); |