diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/gpu/drm/drm_bufs.c | 12 | ||||
| -rw-r--r-- | drivers/gpu/drm/exynos/exynos_drm_gem.c | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/i810/i810_dma.c | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_gem.c | 4 | ||||
| -rw-r--r-- | drivers/input/misc/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/input/misc/twl6040-vibra.c | 4 | ||||
| -rw-r--r-- | drivers/media/common/tuners/xc5000.c | 39 | ||||
| -rw-r--r-- | drivers/media/common/tuners/xc5000.h | 1 | ||||
| -rw-r--r-- | drivers/media/dvb/dvb-core/dvb_frontend.c | 25 | ||||
| -rw-r--r-- | drivers/media/dvb/frontends/drxk_hard.c | 6 | ||||
| -rw-r--r-- | drivers/media/rc/winbond-cir.c | 1 | ||||
| -rw-r--r-- | drivers/media/video/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/media/video/mt9m032.c | 5 | ||||
| -rw-r--r-- | drivers/mfd/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/mfd/asic3.c | 4 | ||||
| -rw-r--r-- | drivers/mfd/omap-usb-host.c | 44 | ||||
| -rw-r--r-- | drivers/mfd/rc5t583.c | 39 | ||||
| -rw-r--r-- | drivers/mfd/twl6040-core.c | 114 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 39 |
19 files changed, 198 insertions, 165 deletions
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c index 30372f7b2d45..348b367debeb 100644 --- a/drivers/gpu/drm/drm_bufs.c +++ b/drivers/gpu/drm/drm_bufs.c @@ -1510,8 +1510,8 @@ int drm_freebufs(struct drm_device *dev, void *data, * \param arg pointer to a drm_buf_map structure. * \return zero on success or a negative number on failure. * - * Maps the AGP, SG or PCI buffer region with do_mmap(), and copies information - * about each buffer into user space. For PCI buffers, it calls do_mmap() with + * Maps the AGP, SG or PCI buffer region with vm_mmap(), and copies information + * about each buffer into user space. For PCI buffers, it calls vm_mmap() with * offset equal to 0, which drm_mmap() interpretes as PCI buffers and calls * drm_mmap_dma(). */ @@ -1553,18 +1553,14 @@ int drm_mapbufs(struct drm_device *dev, void *data, retcode = -EINVAL; goto done; } - down_write(¤t->mm->mmap_sem); - virtual = do_mmap(file_priv->filp, 0, map->size, + virtual = vm_mmap(file_priv->filp, 0, map->size, PROT_READ | PROT_WRITE, MAP_SHARED, token); - up_write(¤t->mm->mmap_sem); } else { - down_write(¤t->mm->mmap_sem); - virtual = do_mmap(file_priv->filp, 0, dma->byte_count, + virtual = vm_mmap(file_priv->filp, 0, dma->byte_count, PROT_READ | PROT_WRITE, MAP_SHARED, 0); - up_write(¤t->mm->mmap_sem); } if (virtual > -1024UL) { /* Real error */ diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 26d51979116b..392ce71ed6a1 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -581,10 +581,8 @@ int exynos_drm_gem_mmap_ioctl(struct drm_device *dev, void *data, obj->filp->f_op = &exynos_drm_gem_fops; obj->filp->private_data = obj; - down_write(¤t->mm->mmap_sem); - addr = do_mmap(obj->filp, 0, args->size, + addr = vm_mmap(obj->filp, 0, args->size, PROT_READ | PROT_WRITE, MAP_SHARED, 0); - up_write(¤t->mm->mmap_sem); drm_gem_object_unreference_unlocked(obj); diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 2c8a60c3b98e..f920fb5e42b6 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -129,6 +129,7 @@ static int i810_map_buffer(struct drm_buf *buf, struct drm_file *file_priv) if (buf_priv->currently_mapped == I810_BUF_MAPPED) return -EINVAL; + /* This is all entirely broken */ down_write(¤t->mm->mmap_sem); old_fops = file_priv->filp->f_op; file_priv->filp->f_op = &i810_buffer_fops; @@ -157,11 +158,8 @@ static int i810_unmap_buffer(struct drm_buf *buf) if (buf_priv->currently_mapped != I810_BUF_MAPPED) return -EINVAL; - down_write(¤t->mm->mmap_sem); - retcode = do_munmap(current->mm, - (unsigned long)buf_priv->virtual, + retcode = vm_munmap((unsigned long)buf_priv->virtual, (size_t) buf->total); - up_write(¤t->mm->mmap_sem); buf_priv->currently_mapped = I810_BUF_UNMAPPED; buf_priv->virtual = NULL; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 0e3c6acde955..0d1e4b7b4b99 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1087,11 +1087,9 @@ i915_gem_mmap_ioctl(struct drm_device *dev, void *data, if (obj == NULL) return -ENOENT; - down_write(¤t->mm->mmap_sem); - addr = do_mmap(obj->filp, 0, args->size, + addr = vm_mmap(obj->filp, 0, args->size, PROT_READ | PROT_WRITE, MAP_SHARED, args->offset); - up_write(¤t->mm->mmap_sem); drm_gem_object_unreference_unlocked(obj); if (IS_ERR((void *)addr)) return addr; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 2d787796bf50..7faf4a7fcaa9 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -380,8 +380,7 @@ config INPUT_TWL4030_VIBRA config INPUT_TWL6040_VIBRA tristate "Support for TWL6040 Vibrator" - depends on TWL4030_CORE - select TWL6040_CORE + depends on TWL6040_CORE select INPUT_FF_MEMLESS help This option enables support for TWL6040 Vibrator Driver. diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index 45874fed523a..14e94f56cb7d 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -28,7 +28,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/workqueue.h> -#include <linux/i2c/twl.h> +#include <linux/input.h> #include <linux/mfd/twl6040.h> #include <linux/slab.h> #include <linux/delay.h> @@ -257,7 +257,7 @@ static SIMPLE_DEV_PM_OPS(twl6040_vibra_pm_ops, twl6040_vibra_suspend, NULL); static int __devinit twl6040_vibra_probe(struct platform_device *pdev) { - struct twl4030_vibra_data *pdata = pdev->dev.platform_data; + struct twl6040_vibra_data *pdata = pdev->dev.platform_data; struct vibra_info *info; int ret; diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index 7f98984e4fad..eab2ea424200 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -54,6 +54,7 @@ struct xc5000_priv { struct list_head hybrid_tuner_instance_list; u32 if_khz; + u32 xtal_khz; u32 freq_hz; u32 bandwidth; u8 video_standard; @@ -214,9 +215,9 @@ static const struct xc5000_fw_cfg xc5000a_1_6_114 = { .size = 12401, }; -static const struct xc5000_fw_cfg xc5000c_41_024_5_31875 = { - .name = "dvb-fe-xc5000c-41.024.5-31875.fw", - .size = 16503, +static const struct xc5000_fw_cfg xc5000c_41_024_5 = { + .name = "dvb-fe-xc5000c-41.024.5.fw", + .size = 16497, }; static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) @@ -226,7 +227,7 @@ static inline const struct xc5000_fw_cfg *xc5000_assign_firmware(int chip_id) case XC5000A: return &xc5000a_1_6_114; case XC5000C: - return &xc5000c_41_024_5_31875; + return &xc5000c_41_024_5; } } @@ -572,6 +573,31 @@ static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz, int mode) return found; } +static int xc_set_xtal(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret = XC_RESULT_SUCCESS; + + switch (priv->chip_id) { + default: + case XC5000A: + /* 32.000 MHz xtal is default */ + break; + case XC5000C: + switch (priv->xtal_khz) { + default: + case 32000: + /* 32.000 MHz xtal is default */ + break; + case 31875: + /* 31.875 MHz xtal configuration */ + ret = xc_write_reg(priv, 0x000f, 0x8081); + break; + } + break; + } + return ret; +} static int xc5000_fwupload(struct dvb_frontend *fe) { @@ -603,6 +629,8 @@ static int xc5000_fwupload(struct dvb_frontend *fe) } else { printk(KERN_INFO "xc5000: firmware uploading...\n"); ret = xc_load_i2c_sequence(fe, fw->data); + if (XC_RESULT_SUCCESS == ret) + ret = xc_set_xtal(fe); printk(KERN_INFO "xc5000: firmware upload complete...\n"); } @@ -1164,6 +1192,9 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, priv->if_khz = cfg->if_khz; } + if (priv->xtal_khz == 0) + priv->xtal_khz = cfg->xtal_khz; + if (priv->radio_input == 0) priv->radio_input = cfg->radio_input; diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h index 3396f8e02b40..39a73bf01406 100644 --- a/drivers/media/common/tuners/xc5000.h +++ b/drivers/media/common/tuners/xc5000.h @@ -34,6 +34,7 @@ struct xc5000_config { u8 i2c_address; u32 if_khz; u8 radio_input; + u32 xtal_khz; int chip_id; }; diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index 39696c6a4ed7..0f64d7182657 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -1446,6 +1446,28 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) __func__); return -EINVAL; } + /* + * Get a delivery system that is compatible with DVBv3 + * NOTE: in order for this to work with softwares like Kaffeine that + * uses a DVBv5 call for DVB-S2 and a DVBv3 call to go back to + * DVB-S, drivers that support both should put the SYS_DVBS entry + * before the SYS_DVBS2, otherwise it won't switch back to DVB-S. + * The real fix is that userspace applications should not use DVBv3 + * and not trust on calling FE_SET_FRONTEND to switch the delivery + * system. + */ + ncaps = 0; + while (fe->ops.delsys[ncaps] && ncaps < MAX_DELSYS) { + if (fe->ops.delsys[ncaps] == desired_system) { + delsys = desired_system; + break; + } + ncaps++; + } + if (delsys == SYS_UNDEFINED) { + dprintk("%s() Couldn't find a delivery system that matches %d\n", + __func__, desired_system); + } } else { /* * This is a DVBv5 call. So, it likely knows the supported @@ -1494,9 +1516,10 @@ static int set_delivery_system(struct dvb_frontend *fe, u32 desired_system) __func__); return -EINVAL; } - c->delivery_system = delsys; } + c->delivery_system = delsys; + /* * The DVBv3 or DVBv5 call is requesting a different system. So, * emulation is needed. diff --git a/drivers/media/dvb/frontends/drxk_hard.c b/drivers/media/dvb/frontends/drxk_hard.c index 36d11756492f..a414b1f2b6a5 100644 --- a/drivers/media/dvb/frontends/drxk_hard.c +++ b/drivers/media/dvb/frontends/drxk_hard.c @@ -1520,8 +1520,10 @@ static int scu_command(struct drxk_state *state, dprintk(1, "\n"); if ((cmd == 0) || ((parameterLen > 0) && (parameter == NULL)) || - ((resultLen > 0) && (result == NULL))) - goto error; + ((resultLen > 0) && (result == NULL))) { + printk(KERN_ERR "drxk: Error %d on %s\n", status, __func__); + return status; + } mutex_lock(&state->mutex); diff --git a/drivers/media/rc/winbond-cir.c b/drivers/media/rc/winbond-cir.c index b09c5fae489b..af526586fa26 100644 --- a/drivers/media/rc/winbond-cir.c +++ b/drivers/media/rc/winbond-cir.c @@ -1046,6 +1046,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id) goto exit_unregister_led; } + data->dev->driver_type = RC_DRIVER_IR_RAW; data->dev->driver_name = WBCIR_NAME; data->dev->input_name = WBCIR_NAME; data->dev->input_phys = "wbcir/cir0"; diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f2479c5c0eb2..ce1e7ba940f6 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -492,7 +492,7 @@ config VIDEO_VS6624 config VIDEO_MT9M032 tristate "MT9M032 camera sensor support" - depends on I2C && VIDEO_V4L2 + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select VIDEO_APTINA_PLL ---help--- This driver supports MT9M032 camera sensors from Aptina, monochrome diff --git a/drivers/media/video/mt9m032.c b/drivers/media/video/mt9m032.c index 7636672c3548..645973c5feb0 100644 --- a/drivers/media/video/mt9m032.c +++ b/drivers/media/video/mt9m032.c @@ -392,10 +392,11 @@ static int mt9m032_set_pad_format(struct v4l2_subdev *subdev, } /* Scaling is not supported, the format is thus fixed. */ - ret = mt9m032_get_pad_format(subdev, fh, fmt); + fmt->format = *__mt9m032_get_pad_format(sensor, fh, fmt->which); + ret = 0; done: - mutex_lock(&sensor->lock); + mutex_unlock(&sensor->lock); return ret; } diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 29f463cc09cb..11e44386fa9b 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -268,10 +268,17 @@ config TWL6030_PWM This is used to control charging LED brightness. config TWL6040_CORE - bool - depends on TWL4030_CORE && GENERIC_HARDIRQS + bool "Support for TWL6040 audio codec" + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE + select REGMAP_I2C default n + help + Say yes here if you want support for Texas Instruments TWL6040 audio + codec. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device (audio, vibra). config MFD_STMPE bool "Support STMicroelectronics STMPE" diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 1895cf9fab8c..1582c3d95257 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -527,7 +527,9 @@ static void asic3_gpio_set(struct gpio_chip *chip, static int asic3_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { - return (offset < ASIC3_NUM_GPIOS) ? IRQ_BOARD_START + offset : -ENXIO; + struct asic3 *asic = container_of(chip, struct asic3, gpio); + + return (offset < ASIC3_NUM_GPIOS) ? asic->irq_base + offset : -ENXIO; } static __init int asic3_gpio_probe(struct platform_device *pdev, diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 95a2e546a489..c8aae6640e64 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,6 @@ #include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/spinlock.h> -#include <linux/gpio.h> #include <plat/usb.h> #include <linux/pm_runtime.h> @@ -502,19 +501,6 @@ static void omap_usbhs_init(struct device *dev) pm_runtime_get_sync(dev); spin_lock_irqsave(&omap->lock, flags); - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_request_one(pdata->ehci_data->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); - - /* Hold the PHY in RESET for enough time till DIR is high */ - udelay(10); - } - omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION); dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev); @@ -593,39 +579,10 @@ static void omap_usbhs_init(struct device *dev) usbhs_omap_tll_init(dev, OMAP_TLL_CHANNEL_COUNT); } - if (pdata->ehci_data->phy_reset) { - /* Hold the PHY in RESET for enough time till - * PHY is settled and ready - */ - udelay(10); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[0], 1); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_set_value - (pdata->ehci_data->reset_gpio_port[1], 1); - } - spin_unlock_irqrestore(&omap->lock, flags); pm_runtime_put_sync(dev); } -static void omap_usbhs_deinit(struct device *dev) -{ - struct usbhs_hcd_omap *omap = dev_get_drvdata(dev); - struct usbhs_omap_platform_data *pdata = &omap->platdata; - - if (pdata->ehci_data->phy_reset) { - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) - gpio_free(pdata->ehci_data->reset_gpio_port[0]); - - if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) - gpio_free(pdata->ehci_data->reset_gpio_port[1]); - } -} - /** * usbhs_omap_probe - initialize TI-based HCDs @@ -860,7 +817,6 @@ static int __devexit usbhs_omap_remove(struct platform_device *pdev) { struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev); - omap_usbhs_deinit(&pdev->dev); iounmap(omap->tll_base); iounmap(omap->uhh_base); clk_put(omap->init_60m_fclk); diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index 99ef944c621d..44afae0a69ce 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -80,44 +80,6 @@ static struct mfd_cell rc5t583_subdevs[] = { {.name = "rc5t583-key", } }; -int rc5t583_write(struct device *dev, uint8_t reg, uint8_t val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_write(rc5t583->regmap, reg, val); -} - -int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - unsigned int ival; - int ret; - ret = regmap_read(rc5t583->regmap, reg, &ival); - if (!ret) - *val = (uint8_t)ival; - return ret; -} - -int rc5t583_set_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, bit_mask); -} - -int rc5t583_clear_bits(struct device *dev, unsigned int reg, - unsigned int bit_mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, bit_mask, 0); -} - -int rc5t583_update(struct device *dev, unsigned int reg, - unsigned int val, unsigned int mask) -{ - struct rc5t583 *rc5t583 = dev_get_drvdata(dev); - return regmap_update_bits(rc5t583->regmap, reg, mask, val); -} - static int __rc5t583_set_ext_pwrreq1_control(struct device *dev, int id, int ext_pwr, int slots) { @@ -197,6 +159,7 @@ int rc5t583_ext_power_req_config(struct device *dev, int ds_id, ds_id, ext_pwr_req); return 0; } +EXPORT_SYMBOL(rc5t583_ext_power_req_config); static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583, struct rc5t583_platform_data *pdata) diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b2d8e512d3cb..2d6bedadca09 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -30,7 +30,9 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/delay.h> -#include <linux/i2c/twl.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/err.h> #include <linux/mfd/core.h> #include <linux/mfd/twl6040.h> @@ -39,7 +41,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) { int ret; - u8 val = 0; + unsigned int val; mutex_lock(&twl6040->io_mutex); /* Vibra control registers from cache */ @@ -47,7 +49,7 @@ int twl6040_reg_read(struct twl6040 *twl6040, unsigned int reg) reg == TWL6040_REG_VIBCTLR)) { val = twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)]; } else { - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); + ret = regmap_read(twl6040->regmap, reg, &val); if (ret < 0) { mutex_unlock(&twl6040->io_mutex); return ret; @@ -64,7 +66,7 @@ int twl6040_reg_write(struct twl6040 *twl6040, unsigned int reg, u8 val) int ret; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); + ret = regmap_write(twl6040->regmap, reg, val); /* Cache the vibra control registers */ if (reg == TWL6040_REG_VIBCTLL || reg == TWL6040_REG_VIBCTLR) twl6040->vibra_ctrl_cache[VIBRACTRL_MEMBER(reg)] = val; @@ -77,16 +79,9 @@ EXPORT_SYMBOL(twl6040_reg_write); int twl6040_set_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val |= mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, mask); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -95,16 +90,9 @@ EXPORT_SYMBOL(twl6040_set_bits); int twl6040_clear_bits(struct twl6040 *twl6040, unsigned int reg, u8 mask) { int ret; - u8 val; mutex_lock(&twl6040->io_mutex); - ret = twl_i2c_read_u8(TWL_MODULE_AUDIO_VOICE, &val, reg); - if (ret) - goto out; - - val &= ~mask; - ret = twl_i2c_write_u8(TWL_MODULE_AUDIO_VOICE, val, reg); -out: + ret = regmap_update_bits(twl6040->regmap, reg, mask, 0); mutex_unlock(&twl6040->io_mutex); return ret; } @@ -494,32 +482,58 @@ static struct resource twl6040_codec_rsrc[] = { }, }; -static int __devinit twl6040_probe(struct platform_device *pdev) +static bool twl6040_readable_reg(struct device *dev, unsigned int reg) { - struct twl4030_audio_data *pdata = pdev->dev.platform_data; + /* Register 0 is not readable */ + if (!reg) + return false; + return true; +} + +static struct regmap_config twl6040_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = TWL6040_REG_STATUS, /* 0x2e */ + + .readable_reg = twl6040_readable_reg, +}; + +static int __devinit twl6040_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct twl6040_platform_data *pdata = client->dev.platform_data; struct twl6040 *twl6040; struct mfd_cell *cell = NULL; int ret, children = 0; if (!pdata) { - dev_err(&pdev->dev, "Platform data is missing\n"); + dev_err(&client->dev, "Platform data is missing\n"); return -EINVAL; } /* In order to operate correctly we need valid interrupt config */ - if (!pdata->naudint_irq || !pdata->irq_base) { - dev_err(&pdev->dev, "Invalid IRQ configuration\n"); + if (!client->irq || !pdata->irq_base) { + dev_err(&client->dev, "Invalid IRQ configuration\n"); return -EINVAL; } - twl6040 = kzalloc(sizeof(struct twl6040), GFP_KERNEL); - if (!twl6040) - return -ENOMEM; + twl6040 = devm_kzalloc(&client->dev, sizeof(struct twl6040), + GFP_KERNEL); + if (!twl6040) { + ret = -ENOMEM; + goto err; + } + + twl6040->regmap = regmap_init_i2c(client, &twl6040_regmap_config); + if (IS_ERR(twl6040->regmap)) { + ret = PTR_ERR(twl6040->regmap); + goto err; + } - platform_set_drvdata(pdev, twl6040); + i2c_set_clientdata(client, twl6040); - twl6040->dev = &pdev->dev; - twl6040->irq = pdata->naudint_irq; + twl6040->dev = &client->dev; + twl6040->irq = client->irq; twl6040->irq_base = pdata->irq_base; mutex_init(&twl6040->mutex); @@ -588,12 +602,12 @@ static int __devinit twl6040_probe(struct platform_device *pdev) } if (children) { - ret = mfd_add_devices(&pdev->dev, pdev->id, twl6040->cells, + ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, NULL, 0); if (ret) goto mfd_err; } else { - dev_err(&pdev->dev, "No platform data found for children\n"); + dev_err(&client->dev, "No platform data found for children\n"); ret = -ENODEV; goto mfd_err; } @@ -608,14 +622,15 @@ gpio2_err: if (gpio_is_valid(twl6040->audpwron)) gpio_free(twl6040->audpwron); gpio1_err: - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); +err: return ret; } -static int __devexit twl6040_remove(struct platform_device *pdev) +static int __devexit twl6040_remove(struct i2c_client *client) { - struct twl6040 *twl6040 = platform_get_drvdata(pdev); + struct twl6040 *twl6040 = i2c_get_clientdata(client); if (twl6040->power_count) twl6040_power(twl6040, 0); @@ -626,23 +641,30 @@ static int __devexit twl6040_remove(struct platform_device *pdev) free_irq(twl6040->irq_base + TWL6040_IRQ_READY, twl6040); twl6040_irq_exit(twl6040); - mfd_remove_devices(&pdev->dev); - platform_set_drvdata(pdev, NULL); - kfree(twl6040); + mfd_remove_devices(&client->dev); + i2c_set_clientdata(client, NULL); + regmap_exit(twl6040->regmap); return 0; } -static struct platform_driver twl6040_driver = { +static const struct i2c_device_id twl6040_i2c_id[] = { + { "twl6040", 0, }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, twl6040_i2c_id); + +static struct i2c_driver twl6040_driver = { + .driver = { + .name = "twl6040", + .owner = THIS_MODULE, + }, .probe = twl6040_probe, .remove = __devexit_p(twl6040_remove), - .driver = { - .owner = THIS_MODULE, - .name = "twl6040", - }, + .id_table = twl6040_i2c_id, }; -module_platform_driver(twl6040_driver); +module_i2c_driver(twl6040_driver); MODULE_DESCRIPTION("TWL6040 MFD"); MODULE_AUTHOR("Misael Lopez Cruz <misael.lopez@ti.com>"); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index bba9850f32f0..5c78f9e71466 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -42,6 +42,7 @@ #include <plat/usb.h> #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> +#include <linux/gpio.h> /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -191,6 +192,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_request_one(pdata->reset_gpio_port[0], + GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_request_one(pdata->reset_gpio_port[1], + GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + + /* Hold the PHY in RESET for enough time till DIR is high */ + udelay(10); + } + pm_runtime_enable(dev); pm_runtime_get_sync(dev); @@ -237,6 +251,19 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1); + if (pdata->phy_reset) { + /* Hold the PHY in RESET for enough time till + * PHY is settled and ready + */ + udelay(10); + + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_set_value(pdata->reset_gpio_port[0], 1); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_set_value(pdata->reset_gpio_port[1], 1); + } + return 0; err_add_hcd: @@ -259,8 +286,9 @@ err_io: */ static int ehci_hcd_omap_remove(struct platform_device *pdev) { - struct device *dev = &pdev->dev; - struct usb_hcd *hcd = dev_get_drvdata(dev); + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd_omap_platform_data *pdata = dev->platform_data; usb_remove_hcd(hcd); disable_put_regulator(dev->platform_data); @@ -269,6 +297,13 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) pm_runtime_put_sync(dev); pm_runtime_disable(dev); + if (pdata->phy_reset) { + if (gpio_is_valid(pdata->reset_gpio_port[0])) + gpio_free(pdata->reset_gpio_port[0]); + + if (gpio_is_valid(pdata->reset_gpio_port[1])) + gpio_free(pdata->reset_gpio_port[1]); + } return 0; } |