1 files changed, 219 insertions, 115 deletions

diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
index dd9a744f82f8..86ffb58fbc85 100644
--- a/drivers/watchdog/sp5100_tco.c
+++ b/drivers/watchdog/sp5100_tco.c
@@ -49,7 +49,7 @@
 /* internal variables */
 
 enum tco_reg_layout {
-	sp5100, sb800, efch
+	sp5100, sb800, efch, efch_mmio
 };
 
 struct sp5100_tco {
@@ -87,6 +87,10 @@ static enum tco_reg_layout tco_reg_layout(struct pci_dev *dev)
 	    dev->revision < 0x40) {
 		return sp5100;
 	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    sp5100_tco_pci->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
+	    sp5100_tco_pci->revision >= AMD_ZEN_SMBUS_PCI_REV) {
+		return efch_mmio;
+	} else if (dev->vendor == PCI_VENDOR_ID_AMD &&
 	    ((dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS &&
 	     dev->revision >= 0x41) ||
 	    (dev->device == PCI_DEVICE_ID_AMD_KERNCZ_SMBUS &&
@@ -209,6 +213,8 @@ static void tco_timer_enable(struct sp5100_tco *tco)
 					  ~EFCH_PM_WATCHDOG_DISABLE,
 					  EFCH_PM_DECODEEN_SECOND_RES);
 		break;
+	default:
+		break;
 	}
 }
 
@@ -223,14 +229,195 @@ static u32 sp5100_tco_read_pm_reg32(u8 index)
 	return val;
 }
 
+static u32 sp5100_tco_request_region(struct device *dev,
+				     u32 mmio_addr,
+				     const char *dev_name)
+{
+	if (!devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
+				     dev_name)) {
+		dev_dbg(dev, "MMIO address 0x%08x already in use\n", mmio_addr);
+		return 0;
+	}
+
+	return mmio_addr;
+}
+
+static u32 sp5100_tco_prepare_base(struct sp5100_tco *tco,
+				   u32 mmio_addr,
+				   u32 alt_mmio_addr,
+				   const char *dev_name)
+{
+	struct device *dev = tco->wdd.parent;
+
+	dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n", mmio_addr);
+
+	if (!mmio_addr && !alt_mmio_addr)
+		return -ENODEV;
+
+	/* Check for MMIO address and alternate MMIO address conflicts */
+	if (mmio_addr)
+		mmio_addr = sp5100_tco_request_region(dev, mmio_addr, dev_name);
+
+	if (!mmio_addr && alt_mmio_addr)
+		mmio_addr = sp5100_tco_request_region(dev, alt_mmio_addr, dev_name);
+
+	if (!mmio_addr) {
+		dev_err(dev, "Failed to reserve MMIO or alternate MMIO region\n");
+		return -EBUSY;
+	}
+
+	tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+	if (!tco->tcobase) {
+		dev_err(dev, "MMIO address 0x%08x failed mapping\n", mmio_addr);
+		devm_release_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
+		return -ENOMEM;
+	}
+
+	dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
+
+	return 0;
+}
+
+static int sp5100_tco_timer_init(struct sp5100_tco *tco)
+{
+	struct watchdog_device *wdd = &tco->wdd;
+	struct device *dev = wdd->parent;
+	u32 val;
+
+	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
+	if (val & SP5100_WDT_DISABLED) {
+		dev_err(dev, "Watchdog hardware is disabled\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Save WatchDogFired status, because WatchDogFired flag is
+	 * cleared here.
+	 */
+	if (val & SP5100_WDT_FIRED)
+		wdd->bootstatus = WDIOF_CARDRESET;
+
+	/* Set watchdog action to reset the system */
+	val &= ~SP5100_WDT_ACTION_RESET;
+	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
+
+	/* Set a reasonable heartbeat before we stop the timer */
+	tco_timer_set_timeout(wdd, wdd->timeout);
+
+	/*
+	 * Stop the TCO before we change anything so we don't race with
+	 * a zeroed timer.
+	 */
+	tco_timer_stop(wdd);
+
+	return 0;
+}
+
+static u8 efch_read_pm_reg8(void __iomem *addr, u8 index)
+{
+	return readb(addr + index);
+}
+
+static void efch_update_pm_reg8(void __iomem *addr, u8 index, u8 reset, u8 set)
+{
+	u8 val;
+
+	val = readb(addr + index);
+	val &= reset;
+	val |= set;
+	writeb(val, addr + index);
+}
+
+static void tco_timer_enable_mmio(void __iomem *addr)
+{
+	efch_update_pm_reg8(addr, EFCH_PM_DECODEEN3,
+			    ~EFCH_PM_WATCHDOG_DISABLE,
+			    EFCH_PM_DECODEEN_SECOND_RES);
+}
+
+static int sp5100_tco_setupdevice_mmio(struct device *dev,
+				       struct watchdog_device *wdd)
+{
+	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
+	const char *dev_name = SB800_DEVNAME;
+	u32 mmio_addr = 0, alt_mmio_addr = 0;
+	struct resource *res;
+	void __iomem *addr;
+	int ret;
+	u32 val;
+
+	res = request_mem_region_muxed(EFCH_PM_ACPI_MMIO_PM_ADDR,
+				       EFCH_PM_ACPI_MMIO_PM_SIZE,
+				       "sp5100_tco");
+
+	if (!res) {
+		dev_err(dev,
+			"Memory region 0x%08x already in use\n",
+			EFCH_PM_ACPI_MMIO_PM_ADDR);
+		return -EBUSY;
+	}
+
+	addr = ioremap(EFCH_PM_ACPI_MMIO_PM_ADDR, EFCH_PM_ACPI_MMIO_PM_SIZE);
+	if (!addr) {
+		dev_err(dev, "Address mapping failed\n");
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/*
+	 * EFCH_PM_DECODEEN_WDT_TMREN is dual purpose. This bitfield
+	 * enables sp5100_tco register MMIO space decoding. The bitfield
+	 * also starts the timer operation. Enable if not already enabled.
+	 */
+	val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+	if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+		efch_update_pm_reg8(addr, EFCH_PM_DECODEEN, 0xff,
+				    EFCH_PM_DECODEEN_WDT_TMREN);
+	}
+
+	/* Error if the timer could not be enabled */
+	val = efch_read_pm_reg8(addr, EFCH_PM_DECODEEN);
+	if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
+		dev_err(dev, "Failed to enable the timer\n");
+		ret = -EFAULT;
+		goto out;
+	}
+
+	mmio_addr = EFCH_PM_WDT_ADDR;
+
+	/* Determine alternate MMIO base address */
+	val = efch_read_pm_reg8(addr, EFCH_PM_ISACONTROL);
+	if (val & EFCH_PM_ISACONTROL_MMIOEN)
+		alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+			EFCH_PM_ACPI_MMIO_WDT_OFFSET;
+
+	ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+	if (!ret) {
+		tco_timer_enable_mmio(addr);
+		ret = sp5100_tco_timer_init(tco);
+	}
+
+out:
+	if (addr)
+		iounmap(addr);
+
+	release_resource(res);
+
+	return ret;
+}
+
 static int sp5100_tco_setupdevice(struct device *dev,
 				  struct watchdog_device *wdd)
 {
 	struct sp5100_tco *tco = watchdog_get_drvdata(wdd);
 	const char *dev_name;
 	u32 mmio_addr = 0, val;
+	u32 alt_mmio_addr = 0;
 	int ret;
 
+	if (tco->tco_reg_layout == efch_mmio)
+		return sp5100_tco_setupdevice_mmio(dev, wdd);
+
 	/* Request the IO ports used by this driver */
 	if (!request_muxed_region(SP5100_IO_PM_INDEX_REG,
 				  SP5100_PM_IOPORTS_SIZE, "sp5100_tco")) {
@@ -247,138 +434,55 @@ static int sp5100_tco_setupdevice(struct device *dev,
 		dev_name = SP5100_DEVNAME;
 		mmio_addr = sp5100_tco_read_pm_reg32(SP5100_PM_WATCHDOG_BASE) &
 								0xfffffff8;
+
+		/*
+		 * Secondly, find the watchdog timer MMIO address
+		 * from SBResource_MMIO register.
+		 */
+
+		/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
+		pci_read_config_dword(sp5100_tco_pci,
+				      SP5100_SB_RESOURCE_MMIO_BASE,
+				      &val);
+
+		/* Verify MMIO is enabled and using bar0 */
+		if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+			alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
 		break;
 	case sb800:
 		dev_name = SB800_DEVNAME;
 		mmio_addr = sp5100_tco_read_pm_reg32(SB800_PM_WATCHDOG_BASE) &
 								0xfffffff8;
+
+		/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
+		val = sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
+
+		/* Verify MMIO is enabled and using bar0 */
+		if ((val & SB800_ACPI_MMIO_MASK) == SB800_ACPI_MMIO_DECODE_EN)
+			alt_mmio_addr = (val & ~0xfff) + SB800_PM_WDT_MMIO_OFFSET;
 		break;
 	case efch:
 		dev_name = SB800_DEVNAME;
-		/*
-		 * On Family 17h devices, the EFCH_PM_DECODEEN_WDT_TMREN bit of
-		 * EFCH_PM_DECODEEN not only enables the EFCH_PM_WDT_ADDR memory
-		 * region, it also enables the watchdog itself.
-		 */
-		if (boot_cpu_data.x86 == 0x17) {
-			val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
-			if (!(val & EFCH_PM_DECODEEN_WDT_TMREN)) {
-				sp5100_tco_update_pm_reg8(EFCH_PM_DECODEEN, 0xff,
-							  EFCH_PM_DECODEEN_WDT_TMREN);
-			}
-		}
 		val = sp5100_tco_read_pm_reg8(EFCH_PM_DECODEEN);
 		if (val & EFCH_PM_DECODEEN_WDT_TMREN)
 			mmio_addr = EFCH_PM_WDT_ADDR;
+
+		val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
+		if (val & EFCH_PM_ISACONTROL_MMIOEN)
+			alt_mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
+				EFCH_PM_ACPI_MMIO_WDT_OFFSET;
 		break;
 	default:
 		return -ENODEV;
 	}
 
-	/* Check MMIO address conflict */
-	if (!mmio_addr ||
-	    !devm_request_mem_region(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE,
-				     dev_name)) {
-		if (mmio_addr)
-			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
-				mmio_addr);
-		switch (tco->tco_reg_layout) {
-		case sp5100:
-			/*
-			 * Secondly, Find the watchdog timer MMIO address
-			 * from SBResource_MMIO register.
-			 */
-			/* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
-			pci_read_config_dword(sp5100_tco_pci,
-					      SP5100_SB_RESOURCE_MMIO_BASE,
-					      &mmio_addr);
-			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
-					  SB800_ACPI_MMIO_SEL)) !=
-						  SB800_ACPI_MMIO_DECODE_EN) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr &= ~0xFFF;
-			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
-			break;
-		case sb800:
-			/* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
-			mmio_addr =
-				sp5100_tco_read_pm_reg32(SB800_PM_ACPI_MMIO_EN);
-			if ((mmio_addr & (SB800_ACPI_MMIO_DECODE_EN |
-					  SB800_ACPI_MMIO_SEL)) !=
-						  SB800_ACPI_MMIO_DECODE_EN) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr &= ~0xFFF;
-			mmio_addr += SB800_PM_WDT_MMIO_OFFSET;
-			break;
-		case efch:
-			val = sp5100_tco_read_pm_reg8(EFCH_PM_ISACONTROL);
-			if (!(val & EFCH_PM_ISACONTROL_MMIOEN)) {
-				ret = -ENODEV;
-				goto unreg_region;
-			}
-			mmio_addr = EFCH_PM_ACPI_MMIO_ADDR +
-				    EFCH_PM_ACPI_MMIO_WDT_OFFSET;
-			break;
-		}
-		dev_dbg(dev, "Got 0x%08x from SBResource_MMIO register\n",
-			mmio_addr);
-		if (!devm_request_mem_region(dev, mmio_addr,
-					     SP5100_WDT_MEM_MAP_SIZE,
-					     dev_name)) {
-			dev_dbg(dev, "MMIO address 0x%08x already in use\n",
-				mmio_addr);
-			ret = -EBUSY;
-			goto unreg_region;
-		}
-	}
-
-	tco->tcobase = devm_ioremap(dev, mmio_addr, SP5100_WDT_MEM_MAP_SIZE);
-	if (!tco->tcobase) {
-		dev_err(dev, "failed to get tcobase address\n");
-		ret = -ENOMEM;
-		goto unreg_region;
-	}
-
-	dev_info(dev, "Using 0x%08x for watchdog MMIO address\n", mmio_addr);
-
-	/* Setup the watchdog timer */
-	tco_timer_enable(tco);
-
-	val = readl(SP5100_WDT_CONTROL(tco->tcobase));
-	if (val & SP5100_WDT_DISABLED) {
-		dev_err(dev, "Watchdog hardware is disabled\n");
-		ret = -ENODEV;
-		goto unreg_region;
+	ret = sp5100_tco_prepare_base(tco, mmio_addr, alt_mmio_addr, dev_name);
+	if (!ret) {
+		/* Setup the watchdog timer */
+		tco_timer_enable(tco);
+		ret = sp5100_tco_timer_init(tco);
 	}
 
-	/*
-	 * Save WatchDogFired status, because WatchDogFired flag is
-	 * cleared here.
-	 */
-	if (val & SP5100_WDT_FIRED)
-		wdd->bootstatus = WDIOF_CARDRESET;
-	/* Set watchdog action to reset the system */
-	val &= ~SP5100_WDT_ACTION_RESET;
-	writel(val, SP5100_WDT_CONTROL(tco->tcobase));
-
-	/* Set a reasonable heartbeat before we stop the timer */
-	tco_timer_set_timeout(wdd, wdd->timeout);
-
-	/*
-	 * Stop the TCO before we change anything so we don't race with
-	 * a zeroed timer.
-	 */
-	tco_timer_stop(wdd);
-
-	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
-
-	return 0;
-
-unreg_region:
 	release_region(SP5100_IO_PM_INDEX_REG, SP5100_PM_IOPORTS_SIZE);
 	return ret;
 }