summaryrefslogtreecommitdiffstats
path: root/drivers/video/omap2
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/video/omap2')
-rw-r--r--drivers/video/omap2/displays/panel-acx565akm.c4
-rw-r--r--drivers/video/omap2/displays/panel-taal.c567
-rw-r--r--drivers/video/omap2/displays/panel-toppoly-tdo35s.c8
-rw-r--r--drivers/video/omap2/dss/dispc.c16
-rw-r--r--drivers/video/omap2/dss/display.c4
-rw-r--r--drivers/video/omap2/dss/dsi.c463
-rw-r--r--drivers/video/omap2/dss/dss.c6
-rw-r--r--drivers/video/omap2/dss/dss.h11
-rw-r--r--drivers/video/omap2/dss/manager.c204
-rw-r--r--drivers/video/omap2/dss/overlay.c2
-rw-r--r--drivers/video/omap2/dss/rfbi.c2
-rw-r--r--drivers/video/omap2/omapfb/omapfb-ioctl.c188
-rw-r--r--drivers/video/omap2/omapfb/omapfb-main.c229
-rw-r--r--drivers/video/omap2/omapfb/omapfb-sysfs.c70
-rw-r--r--drivers/video/omap2/omapfb/omapfb.h29
15 files changed, 1226 insertions, 577 deletions
diff --git a/drivers/video/omap2/displays/panel-acx565akm.c b/drivers/video/omap2/displays/panel-acx565akm.c
index 1f8eb70e2937..07fbb8a733bb 100644
--- a/drivers/video/omap2/displays/panel-acx565akm.c
+++ b/drivers/video/omap2/displays/panel-acx565akm.c
@@ -592,7 +592,7 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
r = omapdss_sdi_display_enable(dssdev);
if (r) {
pr_err("%s sdi enable failed\n", __func__);
- return r;
+ goto fail_unlock;
}
/*FIXME tweak me */
@@ -633,6 +633,8 @@ static int acx_panel_power_on(struct omap_dss_device *dssdev)
return acx565akm_bl_update_status(md->bl_dev);
fail:
omapdss_sdi_display_disable(dssdev);
+fail_unlock:
+ mutex_unlock(&md->mutex);
return r;
}
diff --git a/drivers/video/omap2/displays/panel-taal.c b/drivers/video/omap2/displays/panel-taal.c
index aaf5d308a046..e1c765d11419 100644
--- a/drivers/video/omap2/displays/panel-taal.c
+++ b/drivers/video/omap2/displays/panel-taal.c
@@ -28,12 +28,13 @@
#include <linux/fb.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
-#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
#include <linux/mutex.h>
#include <plat/display.h>
+#include <plat/nokia-dsi-panel.h>
/* DSI Virtual channel. Hardcoded for now. */
#define TCH 0
@@ -62,11 +63,136 @@
#define DCS_GET_ID2 0xdb
#define DCS_GET_ID3 0xdc
-/* #define TAAL_USE_ESD_CHECK */
#define TAAL_ESD_CHECK_PERIOD msecs_to_jiffies(5000)
+static irqreturn_t taal_te_isr(int irq, void *data);
+static void taal_te_timeout_work_callback(struct work_struct *work);
static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable);
+struct panel_regulator {
+ struct regulator *regulator;
+ const char *name;
+ int min_uV;
+ int max_uV;
+};
+
+static void free_regulators(struct panel_regulator *regulators, int n)
+{
+ int i;
+
+ for (i = 0; i < n; i++) {
+ /* disable/put in reverse order */
+ regulator_disable(regulators[n - i - 1].regulator);
+ regulator_put(regulators[n - i - 1].regulator);
+ }
+}
+
+static int init_regulators(struct omap_dss_device *dssdev,
+ struct panel_regulator *regulators, int n)
+{
+ int r, i, v;
+
+ for (i = 0; i < n; i++) {
+ struct regulator *reg;
+
+ reg = regulator_get(&dssdev->dev, regulators[i].name);
+ if (IS_ERR(reg)) {
+ dev_err(&dssdev->dev, "failed to get regulator %s\n",
+ regulators[i].name);
+ r = PTR_ERR(reg);
+ goto err;
+ }
+
+ /* FIXME: better handling of fixed vs. variable regulators */
+ v = regulator_get_voltage(reg);
+ if (v < regulators[i].min_uV || v > regulators[i].max_uV) {
+ r = regulator_set_voltage(reg, regulators[i].min_uV,
+ regulators[i].max_uV);
+ if (r) {
+ dev_err(&dssdev->dev,
+ "failed to set regulator %s voltage\n",
+ regulators[i].name);
+ regulator_put(reg);
+ goto err;
+ }
+ }
+
+ r = regulator_enable(reg);
+ if (r) {
+ dev_err(&dssdev->dev, "failed to enable regulator %s\n",
+ regulators[i].name);
+ regulator_put(reg);
+ goto err;
+ }
+
+ regulators[i].regulator = reg;
+ }
+
+ return 0;
+
+err:
+ free_regulators(regulators, i);
+
+ return r;
+}
+
+/**
+ * struct panel_config - panel configuration
+ * @name: panel name
+ * @type: panel type
+ * @timings: panel resolution
+ * @sleep: various panel specific delays, passed to msleep() if non-zero
+ * @reset_sequence: reset sequence timings, passed to udelay() if non-zero
+ * @regulators: array of panel regulators
+ * @num_regulators: number of regulators in the array
+ */
+struct panel_config {
+ const char *name;
+ int type;
+
+ struct omap_video_timings timings;
+
+ struct {
+ unsigned int sleep_in;
+ unsigned int sleep_out;
+ unsigned int hw_reset;
+ unsigned int enable_te;
+ } sleep;
+
+ struct {
+ unsigned int high;
+ unsigned int low;
+ } reset_sequence;
+
+ struct panel_regulator *regulators;
+ int num_regulators;
+};
+
+enum {
+ PANEL_TAAL,
+};
+
+static struct panel_config panel_configs[] = {
+ {
+ .name = "taal",
+ .type = PANEL_TAAL,
+ .timings = {
+ .x_res = 864,
+ .y_res = 480,
+ },
+ .sleep = {
+ .sleep_in = 5,
+ .sleep_out = 5,
+ .hw_reset = 5,
+ .enable_te = 100, /* possible panel bug */
+ },
+ .reset_sequence = {
+ .high = 10,
+ .low = 10,
+ },
+ },
+};
+
struct taal_data {
struct mutex lock;
@@ -84,8 +210,15 @@ struct taal_data {
bool mirror;
bool te_enabled;
- bool use_ext_te;
- struct completion te_completion;
+
+ atomic_t do_update;
+ struct {
+ u16 x;
+ u16 y;
+ u16 w;
+ u16 h;
+ } update_region;
+ struct delayed_work te_timeout_work;
bool use_dsi_bl;
@@ -96,8 +229,16 @@ struct taal_data {
struct workqueue_struct *esd_wq;
struct delayed_work esd_work;
+
+ struct panel_config *panel_config;
};
+static inline struct nokia_dsi_panel_data
+*get_panel_data(const struct omap_dss_device *dssdev)
+{
+ return (struct nokia_dsi_panel_data *) dssdev->data;
+}
+
static void taal_esd_work(struct work_struct *work);
static void hw_guard_start(struct taal_data *td, int guard_msec)
@@ -159,7 +300,8 @@ static int taal_sleep_in(struct taal_data *td)
hw_guard_start(td, 120);
- msleep(5);
+ if (td->panel_config->sleep.sleep_in)
+ msleep(td->panel_config->sleep.sleep_in);
return 0;
}
@@ -176,7 +318,8 @@ static int taal_sleep_out(struct taal_data *td)
hw_guard_start(td, 120);
- msleep(5);
+ if (td->panel_config->sleep.sleep_out)
+ msleep(td->panel_config->sleep.sleep_out);
return 0;
}
@@ -279,6 +422,7 @@ static int taal_bl_update_status(struct backlight_device *dev)
{
struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
int level;
@@ -290,24 +434,26 @@ static int taal_bl_update_status(struct backlight_device *dev)
dev_dbg(&dssdev->dev, "update brightness to %d\n", level);
+ mutex_lock(&td->lock);
+
if (td->use_dsi_bl) {
if (td->enabled) {
dsi_bus_lock();
r = taal_dcs_write_1(DCS_BRIGHTNESS, level);
dsi_bus_unlock();
- if (r)
- return r;
+ } else {
+ r = 0;
}
} else {
- if (!dssdev->set_backlight)
- return -EINVAL;
-
- r = dssdev->set_backlight(dssdev, level);
- if (r)
- return r;
+ if (!panel_data->set_backlight)
+ r = -EINVAL;
+ else
+ r = panel_data->set_backlight(dssdev, level);
}
- return 0;
+ mutex_unlock(&td->lock);
+
+ return r;
}
static int taal_bl_get_intensity(struct backlight_device *dev)
@@ -344,16 +490,6 @@ static void taal_get_resolution(struct omap_dss_device *dssdev,
}
}
-static irqreturn_t taal_te_isr(int irq, void *data)
-{
- struct omap_dss_device *dssdev = data;
- struct taal_data *td = dev_get_drvdata(&dssdev->dev);
-
- complete_all(&td->te_completion);
-
- return IRQ_HANDLED;
-}
-
static ssize_t taal_num_errors_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -362,6 +498,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
u8 errors;
int r;
+ mutex_lock(&td->lock);
+
if (td->enabled) {
dsi_bus_lock();
r = taal_dcs_read_1(DCS_READ_NUM_ERRORS, &errors);
@@ -370,6 +508,8 @@ static ssize_t taal_num_errors_show(struct device *dev,
r = -ENODEV;
}
+ mutex_unlock(&td->lock);
+
if (r)
return r;
@@ -384,6 +524,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
u8 id1, id2, id3;
int r;
+ mutex_lock(&td->lock);
+
if (td->enabled) {
dsi_bus_lock();
r = taal_get_id(&id1, &id2, &id3);
@@ -392,6 +534,8 @@ static ssize_t taal_hw_revision_show(struct device *dev,
r = -ENODEV;
}
+ mutex_unlock(&td->lock);
+
if (r)
return r;
@@ -441,6 +585,8 @@ static ssize_t store_cabc_mode(struct device *dev,
if (i == ARRAY_SIZE(cabc_modes))
return -EINVAL;
+ mutex_lock(&td->lock);
+
if (td->enabled) {
dsi_bus_lock();
if (!td->cabc_broken)
@@ -450,6 +596,8 @@ static ssize_t store_cabc_mode(struct device *dev,
td->cabc_mode = i;
+ mutex_unlock(&td->lock);
+
return count;
}
@@ -488,47 +636,93 @@ static struct attribute_group taal_attr_group = {
.attrs = taal_attrs,
};
+static void taal_hw_reset(struct omap_dss_device *dssdev)
+{
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+
+ if (panel_data->reset_gpio == -1)
+ return;
+
+ gpio_set_value(panel_data->reset_gpio, 1);
+ if (td->panel_config->reset_sequence.high)
+ udelay(td->panel_config->reset_sequence.high);
+ /* reset the panel */
+ gpio_set_value(panel_data->reset_gpio, 0);
+ /* assert reset */
+ if (td->panel_config->reset_sequence.low)
+ udelay(td->panel_config->reset_sequence.low);
+ gpio_set_value(panel_data->reset_gpio, 1);
+ /* wait after releasing reset */
+ if (td->panel_config->sleep.hw_reset)
+ msleep(td->panel_config->sleep.hw_reset);
+}
+
static int taal_probe(struct omap_dss_device *dssdev)
{
struct backlight_properties props;
struct taal_data *td;
struct backlight_device *bldev;
- int r;
-
- const struct omap_video_timings taal_panel_timings = {
- .x_res = 864,
- .y_res = 480,
- };
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
+ struct panel_config *panel_config = NULL;
+ int r, i;
dev_dbg(&dssdev->dev, "probe\n");
+ if (!panel_data || !panel_data->name) {
+ r = -EINVAL;
+ goto err;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(panel_configs); i++) {
+ if (strcmp(panel_data->name, panel_configs[i].name) == 0) {
+ panel_config = &panel_configs[i];
+ break;
+ }
+ }
+
+ if (!panel_config) {
+ r = -EINVAL;
+ goto err;
+ }
+
dssdev->panel.config = OMAP_DSS_LCD_TFT;
- dssdev->panel.timings = taal_panel_timings;
+ dssdev->panel.timings = panel_config->timings;
dssdev->ctrl.pixel_size = 24;
td = kzalloc(sizeof(*td), GFP_KERNEL);
if (!td) {
r = -ENOMEM;
- goto err0;
+ goto err;
}
td->dssdev = dssdev;
+ td->panel_config = panel_config;
mutex_init(&td->lock);
+ atomic_set(&td->do_update, 0);
+
+ r = init_regulators(dssdev, panel_config->regulators,
+ panel_config->num_regulators);
+ if (r)
+ goto err_reg;
+
td->esd_wq = create_singlethread_workqueue("taal_esd");
if (td->esd_wq == NULL) {
dev_err(&dssdev->dev, "can't create ESD workqueue\n");
r = -ENOMEM;
- goto err1;
+ goto err_wq;
}
INIT_DELAYED_WORK_DEFERRABLE(&td->esd_work, taal_esd_work);
dev_set_drvdata(&dssdev->dev, td);
+ taal_hw_reset(dssdev);
+
/* if no platform set_backlight() defined, presume DSI backlight
* control */
memset(&props, 0, sizeof(struct backlight_properties));
- if (!dssdev->set_backlight)
+ if (!panel_data->set_backlight)
td->use_dsi_bl = true;
if (td->use_dsi_bl)
@@ -539,7 +733,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
&taal_bl_ops, &props);
if (IS_ERR(bldev)) {
r = PTR_ERR(bldev);
- goto err2;
+ goto err_bl;
}
td->bldev = bldev;
@@ -553,13 +747,13 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_bl_update_status(bldev);
- if (dssdev->phy.dsi.ext_te) {
- int gpio = dssdev->phy.dsi.ext_te_gpio;
+ if (panel_data->use_ext_te) {
+ int gpio = panel_data->ext_te_gpio;
r = gpio_request(gpio, "taal irq");
if (r) {
dev_err(&dssdev->dev, "GPIO request failed\n");
- goto err3;
+ goto err_gpio;
}
gpio_direction_input(gpio);
@@ -571,49 +765,52 @@ static int taal_probe(struct omap_dss_device *dssdev)
if (r) {
dev_err(&dssdev->dev, "IRQ request failed\n");
gpio_free(gpio);
- goto err3;
+ goto err_irq;
}
- init_completion(&td->te_completion);
+ INIT_DELAYED_WORK_DEFERRABLE(&td->te_timeout_work,
+ taal_te_timeout_work_callback);
- td->use_ext_te = true;
+ dev_dbg(&dssdev->dev, "Using GPIO TE\n");
}
r = sysfs_create_group(&dssdev->dev.kobj, &taal_attr_group);
if (r) {
dev_err(&dssdev->dev, "failed to create sysfs files\n");
- goto err4;
+ goto err_sysfs;
}
return 0;
-err4:
- if (td->use_ext_te) {
- int gpio = dssdev->phy.dsi.ext_te_gpio;
- free_irq(gpio_to_irq(gpio), dssdev);
- gpio_free(gpio);
- }
-err3:
+err_sysfs:
+ if (panel_data->use_ext_te)
+ free_irq(gpio_to_irq(panel_data->ext_te_gpio), dssdev);
+err_irq:
+ if (panel_data->use_ext_te)
+ gpio_free(panel_data->ext_te_gpio);
+err_gpio:
backlight_device_unregister(bldev);
-err2:
- cancel_delayed_work_sync(&td->esd_work);
+err_bl:
destroy_workqueue(td->esd_wq);
-err1:
+err_wq:
+ free_regulators(panel_config->regulators, panel_config->num_regulators);
+err_reg:
kfree(td);
-err0:
+err:
return r;
}
static void taal_remove(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct backlight_device *bldev;
dev_dbg(&dssdev->dev, "remove\n");
sysfs_remove_group(&dssdev->dev.kobj, &taal_attr_group);
- if (td->use_ext_te) {
- int gpio = dssdev->phy.dsi.ext_te_gpio;
+ if (panel_data->use_ext_te) {
+ int gpio = panel_data->ext_te_gpio;
free_irq(gpio_to_irq(gpio), dssdev);
gpio_free(gpio);
}
@@ -623,9 +820,15 @@ static void taal_remove(struct omap_dss_device *dssdev)
taal_bl_update_status(bldev);
backlight_device_unregister(bldev);
- cancel_delayed_work_sync(&td->esd_work);
+ cancel_delayed_work(&td->esd_work);
destroy_workqueue(td->esd_wq);
+ /* reset, to be sure that the panel is in a valid state */
+ taal_hw_reset(dssdev);
+
+ free_regulators(td->panel_config->regulators,
+ td->panel_config->num_regulators);
+
kfree(td);
}
@@ -635,23 +838,14 @@ static int taal_power_on(struct omap_dss_device *dssdev)
u8 id1, id2, id3;
int r;
- if (dssdev->platform_enable) {
- r = dssdev->platform_enable(dssdev);
- if (r)
- return r;
- }
-
- /* it seems we have to wait a bit until taal is ready */
- msleep(5);
-
- dsi_bus_lock();
-
r = omapdss_dsi_display_enable(dssdev);
if (r) {
dev_err(&dssdev->dev, "failed to enable DSI\n");
goto err0;
}
+ taal_hw_reset(dssdev);
+
omapdss_dsi_vc_enable_hs(TCH, false);
r = taal_sleep_out(td);
@@ -662,34 +856,47 @@ static int taal_power_on(struct omap_dss_device *dssdev)
if (r)
goto err;
- /* on early revisions CABC is broken */
- if (id2 == 0x00 || id2 == 0xff || id2 == 0x81)
+ /* on early Taal revisions CABC is broken */
+ if (td->panel_config->type == PANEL_TAAL &&
+ (id2 == 0x00 || id2 == 0xff || id2 == 0x81))
td->cabc_broken = true;
- taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
- taal_dcs_write_1(DCS_CTRL_DISPLAY, (1<<2) | (1<<5)); /* BL | BCTRL */
+ r = taal_dcs_write_1(DCS_BRIGHTNESS, 0xff);
+ if (r)
+ goto err;
+
+ r = taal_dcs_write_1(DCS_CTRL_DISPLAY,
+ (1<<2) | (1<<5)); /* BL | BCTRL */
+ if (r)
+ goto err;
+
+ r = taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+ if (r)
+ goto err;
- taal_dcs_write_1(DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
+ r = taal_set_addr_mode(td->rotate, td->mirror);
+ if (r)
+ goto err;
- taal_set_addr_mode(td->rotate, td->mirror);
- if (!td->cabc_broken)
- taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+ if (!td->cabc_broken) {
+ r = taal_dcs_write_1(DCS_WRITE_CABC, td->cabc_mode);
+ if (r)
+ goto err;
+ }
- taal_dcs_write_0(DCS_DISPLAY_ON);
+ r = taal_dcs_write_0(DCS_DISPLAY_ON);
+ if (r)
+ goto err;
r = _taal_enable_te(dssdev, td->te_enabled);
if (r)
goto err;
-#ifdef TAAL_USE_ESD_CHECK
- queue_delayed_work(td->esd_wq, &td->esd_work, TAAL_ESD_CHECK_PERIOD);
-#endif
-
td->enabled = 1;
if (!td->intro_printed) {
- dev_info(&dssdev->dev, "revision %02x.%02x.%02x\n",
- id1, id2, id3);
+ dev_info(&dssdev->dev, "%s panel revision %02x.%02x.%02x\n",
+ td->panel_config->name, id1, id2, id3);
if (td->cabc_broken)
dev_info(&dssdev->dev,
"old Taal version, CABC disabled\n");
@@ -698,46 +905,44 @@ static int taal_power_on(struct omap_dss_device *dssdev)
omapdss_dsi_vc_enable_hs(TCH, true);
- dsi_bus_unlock();
-
return 0;
err:
+ dev_err(&dssdev->dev, "error while enabling panel, issuing HW reset\n");
+
+ taal_hw_reset(dssdev);
+
omapdss_dsi_display_disable(dssdev);
err0:
- dsi_bus_unlock();
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
return r;
}
static void taal_power_off(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ int r;
- dsi_bus_lock();
-
- cancel_delayed_work(&td->esd_work);
-
- taal_dcs_write_0(DCS_DISPLAY_OFF);
- taal_sleep_in(td);
+ r = taal_dcs_write_0(DCS_DISPLAY_OFF);
+ if (!r) {
+ r = taal_sleep_in(td);
+ /* HACK: wait a bit so that the message goes through */
+ msleep(10);
+ }
- /* wait a bit so that the message goes through */
- msleep(10);
+ if (r) {
+ dev_err(&dssdev->dev,
+ "error disabling panel, issuing HW reset\n");
+ taal_hw_reset(dssdev);
+ }
omapdss_dsi_display_disable(dssdev);
- if (dssdev->platform_disable)
- dssdev->platform_disable(dssdev);
-
td->enabled = 0;
-
- dsi_bus_unlock();
}
static int taal_enable(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(&dssdev->dev, "enable\n");
@@ -749,10 +954,19 @@ static int taal_enable(struct omap_dss_device *dssdev)
goto err;
}
+ dsi_bus_lock();
+
r = taal_power_on(dssdev);
+
+ dsi_bus_unlock();
+
if (r)
goto err;
+ if (panel_data->use_esd_check)
+ queue_delayed_work(td->esd_wq, &td->esd_work,
+ TAAL_ESD_CHECK_PERIOD);
+
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&td->lock);
@@ -772,9 +986,15 @@ static void taal_disable(struct omap_dss_device *dssdev)
mutex_lock(&td->lock);
+ cancel_delayed_work(&td->esd_work);
+
+ dsi_bus_lock();
+
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
taal_power_off(dssdev);
+ dsi_bus_unlock();
+
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&td->lock);
@@ -794,7 +1014,14 @@ static int taal_suspend(struct omap_dss_device *dssdev)
goto err;
}
+ cancel_delayed_work(&td->esd_work);
+
+ dsi_bus_lock();
+
taal_power_off(dssdev);
+
+ dsi_bus_unlock();
+
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
mutex_unlock(&td->lock);
@@ -808,6 +1035,7 @@ err:
static int taal_resume(struct omap_dss_device *dssdev)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(&dssdev->dev, "resume\n");
@@ -819,8 +1047,20 @@ static int taal_resume(struct omap_dss_device *dssdev)
goto err;
}
+ dsi_bus_lock();
+
r = taal_power_on(dssdev);
- dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+ dsi_bus_unlock();
+
+ if (r) {
+ dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+ } else {
+ dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+ if (panel_data->use_esd_check)
+ queue_delayed_work(td->esd_wq, &td->esd_work,
+ TAAL_ESD_CHECK_PERIOD);
+ }
mutex_unlock(&td->lock);
@@ -837,10 +1077,52 @@ static void taal_framedone_cb(int err, void *data)
dsi_bus_unlock();
}
+static irqreturn_t taal_te_isr(int irq, void *data)
+{
+ struct omap_dss_device *dssdev = data;
+ struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ int old;
+ int r;
+
+ old = atomic_cmpxchg(&td->do_update, 1, 0);
+
+ if (old) {
+ cancel_delayed_work(&td->te_timeout_work);
+
+ r = omap_dsi_update(dssdev, TCH,
+ td->update_region.x,
+ td->update_region.y,
+ td->update_region.w,
+ td->update_region.h,
+ taal_framedone_cb, dssdev);
+ if (r)
+ goto err;
+ }
+
+ return IRQ_HANDLED;
+err:
+ dev_err(&dssdev->dev, "start update failed\n");
+ dsi_bus_unlock();
+ return IRQ_HANDLED;
+}
+
+static void taal_te_timeout_work_callback(struct work_struct *work)
+{
+ struct taal_data *td = container_of(work, struct taal_data,
+ te_timeout_work.work);
+ struct omap_dss_device *dssdev = td->dssdev;
+
+ dev_err(&dssdev->dev, "TE not received for 250ms!\n");
+
+ atomic_set(&td->do_update, 0);
+ dsi_bus_unlock();
+}
+
static int taal_update(struct omap_dss_device *dssdev,
u16 x, u16 y, u16 w, u16 h)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
dev_dbg(&dssdev->dev, "update %d, %d, %d x %d\n", x, y, w, h);
@@ -853,7 +1135,7 @@ static int taal_update(struct omap_dss_device *dssdev,
goto err;
}
- r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h);
+ r = omap_dsi_prepare_update(dssdev, &x, &y, &w, &h, true);
if (r)
goto err;
@@ -861,10 +1143,21 @@ static int taal_update(struct omap_dss_device *dssdev,
if (r)
goto err;
- r = omap_dsi_update(dssdev, TCH, x, y, w, h,
- taal_framedone_cb, dssdev);
- if (r)
- goto err;
+ if (td->te_enabled && panel_data->use_ext_te) {
+ td->update_region.x = x;
+ td->update_region.y = y;
+ td->update_region.w = w;
+ td->update_region.h = h;
+ barrier();
+ schedule_delayed_work(&td->te_timeout_work,
+ msecs_to_jiffies(250));
+ atomic_set(&td->do_update, 1);
+ } else {
+ r = omap_dsi_update(dssdev, TCH, x, y, w, h,
+ taal_framedone_cb, dssdev);
+ if (r)
+ goto err;
+ }
/* note: no bus_unlock here. unlock is in framedone_cb */
mutex_unlock(&td->lock);
@@ -894,20 +1187,19 @@ static int taal_sync(struct omap_dss_device *dssdev)
static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
{
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
- td->te_enabled = enable;
-
if (enable)
r = taal_dcs_write_1(DCS_TEAR_ON, 0);
else
r = taal_dcs_write_0(DCS_TEAR_OFF);
- omapdss_dsi_enable_te(dssdev, enable);
+ if (!panel_data->use_ext_te)
+ omapdss_dsi_enable_te(dssdev, enable);
- /* XXX for some reason, DSI TE breaks if we don't wait here.
- * Panel bug? Needs more studying */
- msleep(100);
+ if (td->panel_config->sleep.enable_te)
+ msleep(td->panel_config->sleep.enable_te);
return r;
}
@@ -918,10 +1210,26 @@ static int taal_enable_te(struct omap_dss_device *dssdev, bool enable)
int r;
mutex_lock(&td->lock);
+
+ if (td->te_enabled == enable)
+ goto end;
+
dsi_bus_lock();
- r = _taal_enable_te(dssdev, enable);
+ if (td->enabled) {
+ r = _taal_enable_te(dssdev, enable);
+ if (r)
+ goto err;
+ }
+
+ td->te_enabled = enable;
+
+ dsi_bus_unlock();
+end:
+ mutex_unlock(&td->lock);
+ return 0;
+err:
dsi_bus_unlock();
mutex_unlock(&td->lock);
@@ -948,6 +1256,10 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
dev_dbg(&dssdev->dev, "rotate %d\n", rotate);
mutex_lock(&td->lock);
+
+ if (td->rotate == rotate)
+ goto end;
+
dsi_bus_lock();
if (td->enabled) {
@@ -959,6 +1271,7 @@ static int taal_rotate(struct omap_dss_device *dssdev, u8 rotate)
td->rotate = rotate;
dsi_bus_unlock();
+end:
mutex_unlock(&td->lock);
return 0;
err:
@@ -987,6 +1300,10 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
dev_dbg(&dssdev->dev, "mirror %d\n", enable);
mutex_lock(&td->lock);
+
+ if (td->mirror == enable)
+ goto end;
+
dsi_bus_lock();
if (td->enabled) {
r = taal_set_addr_mode(td->rotate, enable);
@@ -997,6 +1314,7 @@ static int taal_mirror(struct omap_dss_device *dssdev, bool enable)
td->mirror = enable;
dsi_bus_unlock();
+end:
mutex_unlock(&td->lock);
return 0;
err:
@@ -1024,23 +1342,30 @@ static int taal_run_test(struct omap_dss_device *dssdev, int test_num)
int r;
mutex_lock(&td->lock);
+
+ if (!td->enabled) {
+ r = -ENODEV;
+ goto err1;
+ }
+
dsi_bus_lock();
r = taal_dcs_read_1(DCS_GET_ID1, &id1);
if (r)
- goto err;
+ goto err2;
r = taal_dcs_read_1(DCS_GET_ID2, &id2);
if (r)
- goto err;
+ goto err2;
r = taal_dcs_read_1(DCS_GET_ID3, &id3);
if (r)
- goto err;
+ goto err2;
dsi_bus_unlock();
mutex_unlock(&td->lock);
return 0;
-err:
+err2:
dsi_bus_unlock();
+err1:
mutex_unlock(&td->lock);
return r;
}
@@ -1128,6 +1453,7 @@ static void taal_esd_work(struct work_struct *work)
struct taal_data *td = container_of(work, struct taal_data,
esd_work.work);
struct omap_dss_device *dssdev = td->dssdev;
+ struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
u8 state1, state2;
int r;
@@ -1168,7 +1494,7 @@ static void taal_esd_work(struct work_struct *work)
}
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
- if (td->use_ext_te && td->te_enabled) {
+ if (td->te_enabled && panel_data->use_ext_te) {
r = taal_dcs_write_1(DCS_TEAR_ON, 0);
if (r)
goto err;
@@ -1184,6 +1510,7 @@ err:
dev_err(&dssdev->dev, "performing LCD reset\n");
taal_power_off(dssdev);
+ taal_hw_reset(dssdev);
taal_power_on(dssdev);
dsi_bus_unlock();
diff --git a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
index fa434ca6e4b7..e320e67d06f3 100644
--- a/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
+++ b/drivers/video/omap2/displays/panel-toppoly-tdo35s.c
@@ -73,8 +73,12 @@ static void toppoly_tdo_panel_power_off(struct omap_dss_device *dssdev)
static int toppoly_tdo_panel_probe(struct omap_dss_device *dssdev)
{
- dssdev->panel.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
- OMAP_DSS_LCD_IHS;
+ dssdev->panel.config = OMAP_DSS_LCD_TFT |
+ OMAP_DSS_LCD_IVS |
+ OMAP_DSS_LCD_IHS |
+ OMAP_DSS_LCD_IPC |
+ OMAP_DSS_LCD_ONOFF;
+
dssdev->panel.timings = toppoly_tdo_panel_timings;
return 0;
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index e777e352dbcd..5ecdc0004094 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -31,6 +31,7 @@
#include <linux/seq_file.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
+#include <linux/hardirq.h>
#include <plat/sram.h>
#include <plat/clock.h>
@@ -335,7 +336,7 @@ void dispc_save_context(void)
void dispc_restore_context(void)
{
RR(SYSCONFIG);
- RR(IRQENABLE);
+ /*RR(IRQENABLE);*/
/*RR(CONTROL);*/
RR(CONFIG);
RR(DEFAULT_COLOR0);
@@ -472,6 +473,15 @@ void dispc_restore_context(void)
/* enable last, because LCD & DIGIT enable are here */
RR(CONTROL);
+
+ /* clear spurious SYNC_LOST_DIGIT interrupts */
+ dispc_write_reg(DISPC_IRQSTATUS, DISPC_IRQ_SYNC_LOST_DIGIT);
+
+ /*
+ * enable last so IRQs won't trigger before
+ * the context is fully restored
+ */
+ RR(IRQENABLE);
}
#undef SR
@@ -3019,7 +3029,7 @@ void dispc_fake_vsync_irq(void)
u32 irqstatus = DISPC_IRQ_VSYNC;
int i;
- local_irq_disable();
+ WARN_ON(!in_interrupt());
for (i = 0; i < DISPC_MAX_NR_ISRS; i++) {
struct omap_dispc_isr_data *isr_data;
@@ -3031,8 +3041,6 @@ void dispc_fake_vsync_irq(void)
if (isr_data->mask & irqstatus)
isr_data->isr(isr_data->arg, irqstatus);
}
-
- local_irq_enable();
}
#endif
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/omap2/dss/display.c
index ef8c8529dda2..22dd7a474f79 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/omap2/dss/display.c
@@ -82,6 +82,9 @@ static ssize_t display_upd_mode_store(struct device *dev,
int val, r;
enum omap_dss_update_mode mode;
+ if (!dssdev->driver->set_update_mode)
+ return -EINVAL;
+
val = simple_strtoul(buf, NULL, 10);
switch (val) {
@@ -343,7 +346,6 @@ int omapdss_default_get_recommended_bpp(struct omap_dss_device *dssdev)
case OMAP_DISPLAY_TYPE_VENC:
case OMAP_DISPLAY_TYPE_SDI:
return 24;
- return 24;
default:
BUG();
}
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c
index 3af207b2bde3..b3fa3a7db911 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/omap2/dss/dsi.c
@@ -165,6 +165,14 @@ struct dsi_reg { u16 idx; };
#define DSI_CIO_IRQ_ERRCONTENTIONLP1_3 (1 << 25)
#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL0 (1 << 30)
#define DSI_CIO_IRQ_ULPSACTIVENOT_ALL1 (1 << 31)
+#define DSI_CIO_IRQ_ERROR_MASK \
+ (DSI_CIO_IRQ_ERRSYNCESC1 | DSI_CIO_IRQ_ERRSYNCESC2 | \
+ DSI_CIO_IRQ_ERRSYNCESC3 | DSI_CIO_IRQ_ERRESC1 | DSI_CIO_IRQ_ERRESC2 | \
+ DSI_CIO_IRQ_ERRESC3 | DSI_CIO_IRQ_ERRCONTROL1 | \
+ DSI_CIO_IRQ_ERRCONTROL2 | DSI_CIO_IRQ_ERRCONTROL3 | \
+ DSI_CIO_IRQ_ERRCONTENTIONLP0_1 | DSI_CIO_IRQ_ERRCONTENTIONLP1_1 | \
+ DSI_CIO_IRQ_ERRCONTENTIONLP0_2 | DSI_CIO_IRQ_ERRCONTENTIONLP1_2 | \
+ DSI_CIO_IRQ_ERRCONTENTIONLP0_3 | DSI_CIO_IRQ_ERRCONTENTIONLP1_3)
#define DSI_DT_DCS_SHORT_WRITE_0 0x05
#define DSI_DT_DCS_SHORT_WRITE_1 0x15
@@ -232,13 +240,15 @@ static struct
unsigned pll_locked;
struct completion bta_completion;
+ void (*bta_callback)(void);
int update_channel;
struct dsi_update_region update_region;
bool te_enabled;
- struct work_struct framedone_work;
+ struct workqueue_struct *workqueue;
+
void (*framedone_callback)(int, void *);
void *framedone_data;
@@ -509,9 +519,13 @@ void dsi_irq_handler(void)
dss_collect_irq_stats(vcstatus, dsi.irq_stats.vc_irqs[i]);
#endif
- if (vcstatus & DSI_VC_IRQ_BTA)
+ if (vcstatus & DSI_VC_IRQ_BTA) {
complete(&dsi.bta_completion);
+ if (dsi.bta_callback)
+ dsi.bta_callback();
+ }
+
if (vcstatus & DSI_VC_IRQ_ERROR_MASK) {
DSSERR("DSI VC(%d) error, vc irqstatus %x\n",
i, vcstatus);
@@ -536,8 +550,12 @@ void dsi_irq_handler(void)
/* flush posted write */
dsi_read_reg(DSI_COMPLEXIO_IRQ_STATUS);
- DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
- print_irq_status_cio(ciostatus);
+ if (ciostatus & DSI_CIO_IRQ_ERROR_MASK) {
+ DSSERR("DSI CIO error, cio irqstatus %x\n", ciostatus);
+ print_irq_status_cio(ciostatus);
+ } else if (debug_irq) {
+ print_irq_status_cio(ciostatus);
+ }
}
dsi_write_reg(DSI_IRQSTATUS, irqstatus & ~DSI_IRQ_CHANNEL_MASK);
@@ -584,11 +602,8 @@ static void _dsi_initialize_irq(void)
for (i = 0; i < 4; ++i)
dsi_write_reg(DSI_VC_IRQENABLE(i), l);
- /* XXX zonda responds incorrectly, causing control error:
- Exit from LP-ESC mode to LP11 uses wrong transition states on the
- data lines LP0 and LN0. */
- dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE,
- -1 & (~DSI_CIO_IRQ_ERRCONTROL2));
+ l = DSI_CIO_IRQ_ERROR_MASK;
+ dsi_write_reg(DSI_COMPLEXIO_IRQ_ENABLE, l);
}
static u32 dsi_get_errors(void)
@@ -1098,6 +1113,7 @@ int dsi_pll_init(struct omap_dss_device *dssdev, bool enable_hsclk,
if (wait_for_bit_change(DSI_PLL_STATUS, 0, 1) != 1) {
DSSERR("PLL not coming out of reset.\n");
r = -ENODEV;
+ dispc_pck_free_enable(0);
goto err1;
}
@@ -1740,42 +1756,52 @@ static void dsi_vc_initial_config(int channel)
dsi.vc[channel].mode = DSI_VC_MODE_L4;
}
-static void dsi_vc_config_l4(int channel)
+static int dsi_vc_config_l4(int channel)
{
if (dsi.vc[channel].mode == DSI_VC_MODE_L4)
- return;
+ return 0;
DSSDBGF("%d", channel);
dsi_vc_enable(channel, 0);
- if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+ /* VC_BUSY */
+ if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
DSSERR("vc(%d) busy when trying to config for L4\n", channel);
+ return -EIO;
+ }
REG_FLD_MOD(DSI_VC_CTRL(channel), 0, 1, 1); /* SOURCE, 0 = L4 */
dsi_vc_enable(channel, 1);
dsi.vc[channel].mode = DSI_VC_MODE_L4;
+
+ return 0;
}
-static void dsi_vc_config_vp(int channel)
+static int dsi_vc_config_vp(int channel)
{
if (dsi.vc[channel].mode == DSI_VC_MODE_VP)
- return;
+ return 0;
DSSDBGF("%d", channel);
dsi_vc_enable(channel, 0);
- if (REG_GET(DSI_VC_CTRL(channel), 15, 15)) /* VC_BUSY */
+ /* VC_BUSY */
+ if (wait_for_bit_change(DSI_VC_CTRL(channel), 15, 0) != 0) {
DSSERR("vc(%d) busy when trying to config for VP\n", channel);
+ return -EIO;
+ }
REG_FLD_MOD(DSI_VC_CTRL(channel), 1, 1, 1); /* SOURCE, 1 = video port */
dsi_vc_enable(channel, 1);
dsi.vc[channel].mode = DSI_VC_MODE_VP;
+
+ return 0;
}
@@ -1854,19 +1880,19 @@ static u16 dsi_vc_flush_receive_data(int channel)
u32 val;
u8 dt;
val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel));
- DSSDBG("\trawval %#08x\n", val);
+ DSSERR("\trawval %#08x\n", val);
dt = FLD_GET(val, 5, 0);
if (dt == DSI_DT_RX_ACK_WITH_ERR) {
u16 err = FLD_GET(val, 23, 8);
dsi_show_rx_ack_with_err(err);
} else if (dt == DSI_DT_RX_SHORT_READ_1) {
- DSSDBG("\tDCS short response, 1 byte: %#x\n",
+ DSSERR("\tDCS short response, 1 byte: %#x\n",
FLD_GET(val, 23, 8));
} else if (dt == DSI_DT_RX_SHORT_READ_2) {
- DSSDBG("\tDCS short response, 2 byte: %#x\n",
+ DSSERR("\tDCS short response, 2 byte: %#x\n",
FLD_GET(val, 23, 8));
} else if (dt == DSI_DT_RX_DCS_LONG_READ) {
- DSSDBG("\tDCS long response, len %d\n",
+ DSSERR("\tDCS long response, len %d\n",
FLD_GET(val, 23, 8));
dsi_vc_flush_long_data(channel);
} else {
@@ -2087,6 +2113,13 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len)
if (r)
goto err;
+ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */
+ DSSERR("rx fifo not empty after write, dumping data:\n");
+ dsi_vc_flush_receive_data(channel);
+ r = -EIO;
+ goto err;
+ }
+
return 0;
err:
DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n",
@@ -2233,11 +2266,12 @@ int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data)
}
EXPORT_SYMBOL(dsi_vc_dcs_read_1);
-int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
+int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u8 *data1, u8 *data2)
{
+ u8 buf[2];
int r;
- r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2);
+ r = dsi_vc_dcs_read(channel, dcs_cmd, buf, 2);
if (r < 0)
return r;
@@ -2245,231 +2279,122 @@ int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data)
if (r != 2)
return -EIO;
+ *data1 = buf[0];
+ *data2 = buf[1];
+
return 0;
}
EXPORT_SYMBOL(dsi_vc_dcs_read_2);
int dsi_vc_set_max_rx_packet_size(int channel, u16 len)
{
- int r;
- r = dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
+ return dsi_vc_send_short(channel, DSI_DT_SET_MAX_RET_PKG_SIZE,
len, 0);
-
- if (r)
- return r;
-
- r = dsi_vc_send_bta_sync(channel);
-
- return r;
}
EXPORT_SYMBOL(dsi_vc_set_max_rx_packet_size);
-static void dsi_set_lp_rx_timeout(unsigned long ns)
+static void dsi_set_lp_rx_timeout(unsigned ticks, bool x4, bool x16)
{
- u32 r;
- unsigned x4, x16;
unsigned long fck;
- unsigned long ticks;
+ unsigned long total_ticks;
+ u32 r;
- /* ticks in DSI_FCK */
+ BUG_ON(ticks > 0x1fff);
+ /* ticks in DSI_FCK */
fck = dsi_fclk_rate();
- ticks = (fck / 1000 / 1000) * ns / 1000;
- x4 = 0;
- x16 = 0;
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
- x4 = 1;
- x16 = 0;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
- x4 = 0;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
- x4 = 1;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- DSSWARN("LP_TX_TO over limit, setting it to max\n");
- ticks = 0x1fff;
- x4 = 1;
- x16 = 1;
- }
r = dsi_read_reg(DSI_TIMING2);
r = FLD_MOD(r, 1, 15, 15); /* LP_RX_TO */
- r = FLD_MOD(r, x16, 14, 14); /* LP_RX_TO_X16 */
- r = FLD_MOD(r, x4, 13, 13); /* LP_RX_TO_X4 */
+ r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* LP_RX_TO_X16 */
+ r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* LP_RX_TO_X4 */
r = FLD_MOD(r, ticks, 12, 0); /* LP_RX_COUNTER */
dsi_write_reg(DSI_TIMING2, r);
- DSSDBG("LP_RX_TO %lu ns (%#lx ticks%s%s)\n",
- (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
- (fck / 1000 / 1000),
- ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+ total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+ DSSDBG("LP_RX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+ total_ticks,
+ ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+ (total_ticks * 1000) / (fck / 1000 / 1000));
}
-static void dsi_set_ta_timeout(unsigned long ns)
+static void dsi_set_ta_timeout(unsigned ticks, bool x8, bool x16)
{
- u32 r;
- unsigned x8, x16;
unsigned long fck;
- unsigned long ticks;
+ unsigned long total_ticks;
+ u32 r;
+
+ BUG_ON(ticks > 0x1fff);
/* ticks in DSI_FCK */
fck = dsi_fclk_rate();
- ticks = (fck / 1000 / 1000) * ns / 1000;
- x8 = 0;
- x16 = 0;
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 8;
- x8 = 1;
- x16 = 0;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
- x8 = 0;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / (8 * 16);
- x8 = 1;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- DSSWARN("TA_TO over limit, setting it to max\n");
- ticks = 0x1fff;
- x8 = 1;
- x16 = 1;
- }
r = dsi_read_reg(DSI_TIMING1);
r = FLD_MOD(r, 1, 31, 31); /* TA_TO */
- r = FLD_MOD(r, x16, 30, 30); /* TA_TO_X16 */
- r = FLD_MOD(r, x8, 29, 29); /* TA_TO_X8 */
+ r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* TA_TO_X16 */
+ r = FLD_MOD(r, x8 ? 1 : 0, 29, 29); /* TA_TO_X8 */
r = FLD_MOD(r, ticks, 28, 16); /* TA_TO_COUNTER */
dsi_write_reg(DSI_TIMING1, r);
- DSSDBG("TA_TO %lu ns (%#lx ticks%s%s)\n",
- (ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1) * 1000) /
- (fck / 1000 / 1000),
- ticks, x8 ? " x8" : "", x16 ? " x16" : "");
+ total_ticks = ticks * (x16 ? 16 : 1) * (x8 ? 8 : 1);
+
+ DSSDBG("TA_TO %lu ticks (%#x%s%s) = %lu ns\n",
+ total_ticks,
+ ticks, x8 ? " x8" : "", x16 ? " x16" : "",
+ (total_ticks * 1000) / (fck / 1000 / 1000));
}
-static void dsi_set_stop_state_counter(unsigned long ns)
+static void dsi_set_stop_state_counter(unsigned ticks, bool x4, bool x16)
{
- u32 r;
- unsigned x4, x16;
unsigned long fck;
- unsigned long ticks;
+ unsigned long total_ticks;
+ u32 r;
- /* ticks in DSI_FCK */
+ BUG_ON(ticks > 0x1fff);
+ /* ticks in DSI_FCK */
fck = dsi_fclk_rate();
- ticks = (fck / 1000 / 1000) * ns / 1000;
- x4 = 0;
- x16 = 0;
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
- x4 = 1;
- x16 = 0;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
- x4 = 0;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
- x4 = 1;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- DSSWARN("STOP_STATE_COUNTER_IO over limit, "
- "setting it to max\n");
- ticks = 0x1fff;
- x4 = 1;
- x16 = 1;
- }
r = dsi_read_reg(DSI_TIMING1);
r = FLD_MOD(r, 1, 15, 15); /* FORCE_TX_STOP_MODE_IO */
- r = FLD_MOD(r, x16, 14, 14); /* STOP_STATE_X16_IO */
- r = FLD_MOD(r, x4, 13, 13); /* STOP_STATE_X4_IO */
+ r = FLD_MOD(r, x16 ? 1 : 0, 14, 14); /* STOP_STATE_X16_IO */
+ r = FLD_MOD(r, x4 ? 1 : 0, 13, 13); /* STOP_STATE_X4_IO */
r = FLD_MOD(r, ticks, 12, 0); /* STOP_STATE_COUNTER_IO */
dsi_write_reg(DSI_TIMING1, r);
- DSSDBG("STOP_STATE_COUNTER %lu ns (%#lx ticks%s%s)\n",
- (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
- (fck / 1000 / 1000),
- ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+ total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+ DSSDBG("STOP_STATE_COUNTER %lu ticks (%#x%s%s) = %lu ns\n",
+ total_ticks,
+ ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+ (total_ticks * 1000) / (fck / 1000 / 1000));
}
-static void dsi_set_hs_tx_timeout(unsigned long ns)
+static void dsi_set_hs_tx_timeout(unsigned ticks, bool x4, bool x16)
{
- u32 r;
- unsigned x4, x16;
unsigned long fck;
- unsigned long ticks;
+ unsigned long total_ticks;
+ u32 r;
- /* ticks in TxByteClkHS */
+ BUG_ON(ticks > 0x1fff);
+ /* ticks in TxByteClkHS */
fck = dsi_get_txbyteclkhs();
- ticks = (fck / 1000 / 1000) * ns / 1000;
- x4 = 0;
- x16 = 0;
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 4;
- x4 = 1;
- x16 = 0;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / 16;
- x4 = 0;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- ticks = (fck / 1000 / 1000) * ns / 1000 / (4 * 16);
- x4 = 1;
- x16 = 1;
- }
-
- if (ticks > 0x1fff) {
- DSSWARN("HS_TX_TO over limit, setting it to max\n");
- ticks = 0x1fff;
- x4 = 1;
- x16 = 1;
- }
r = dsi_read_reg(DSI_TIMING2);
r = FLD_MOD(r, 1, 31, 31); /* HS_TX_TO */
- r = FLD_MOD(r, x16, 30, 30); /* HS_TX_TO_X16 */
- r = FLD_MOD(r, x4, 29, 29); /* HS_TX_TO_X8 (4 really) */
+ r = FLD_MOD(r, x16 ? 1 : 0, 30, 30); /* HS_TX_TO_X16 */
+ r = FLD_MOD(r, x4 ? 1 : 0, 29, 29); /* HS_TX_TO_X8 (4 really) */
r = FLD_MOD(r, ticks, 28, 16); /* HS_TX_TO_COUNTER */
dsi_write_reg(DSI_TIMING2, r);
- DSSDBG("HS_TX_TO %lu ns (%#lx ticks%s%s)\n",
- (ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1) * 1000) /
- (fck / 1000 / 1000),
- ticks, x4 ? " x4" : "", x16 ? " x16" : "");
+ total_ticks = ticks * (x16 ? 16 : 1) * (x4 ? 4 : 1);
+
+ DSSDBG("HS_TX_TO %lu ticks (%#x%s%s) = %lu ns\n",
+ total_ticks,
+ ticks, x4 ? " x4" : "", x16 ? " x16" : "",
+ (total_ticks * 1000) / (fck / 1000 / 1000));
}
static int dsi_proto_config(struct omap_dss_device *dssdev)
{
@@ -2487,10 +2412,10 @@ static int dsi_proto_config(struct omap_dss_device *dssdev)
DSI_FIFO_SIZE_32);
/* XXX what values for the timeouts? */
- dsi_set_stop_state_counter(1000);
- dsi_set_ta_timeout(6400000);
- dsi_set_lp_rx_timeout(48000);
- dsi_set_hs_tx_timeout(1000000);
+ dsi_set_stop_state_counter(0x1000, false, false);
+ dsi_set_ta_timeout(0x1fff, true, true);
+ dsi_set_lp_rx_timeout(0x1fff, true, true);
+ dsi_set_hs_tx_timeout(0x1fff, true, true);
switch (dssdev->ctrl.pixel_size) {
case 16:
@@ -2759,6 +2684,7 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
unsigned packet_payload;
unsigned packet_len;
u32 l;
+ int r;
const unsigned channel = dsi.update_channel;
/* line buffer is 1024 x 24bits */
/* XXX: for some reason using full buffer size causes considerable TX
@@ -2809,8 +2735,9 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev,
dsi_perf_mark_start();
- schedule_delayed_work(&dsi.framedone_timeout_work,
+ r = queue_delayed_work(dsi.workqueue, &dsi.framedone_timeout_work,
msecs_to_jiffies(250));
+ BUG_ON(r == 0);
dss_start_update(dssdev);
@@ -2834,62 +2761,70 @@ static void dsi_te_timeout(unsigned long arg)
}
#endif
-static void dsi_framedone_timeout_work_callback(struct work_struct *work)
+static void dsi_handle_framedone(int error)
{
- int r;
const int channel = dsi.update_channel;
- DSSERR("Framedone not received for 250ms!\n");
+ cancel_delayed_work(&dsi.framedone_timeout_work);
+
+ dsi_vc_disable_bta_irq(channel);
/* SIDLEMODE back to smart-idle */
dispc_enable_sidle();
+ dsi.bta_callback = NULL;
+
if (dsi.te_enabled) {
/* enable LP_RX_TO again after the TE */
REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */
}
- /* Send BTA after the frame. We need this for the TE to work, as TE
- * trigger is only sent for BTAs without preceding packet. Thus we need
- * to BTA after the pixel packets so that next BTA will cause TE
- * trigger.
- *
- * This is not needed when TE is not in use, but we do it anyway to
- * make sure that the transfer has been completed. It would be more
- * optimal, but more complex, to wait only just before starting next
- * transfer. */
- r = dsi_vc_send_bta_sync(channel);
- if (r)
- DSSERR("BTA after framedone failed\n");
-
/* RX_FIFO_NOT_EMPTY */
if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
DSSERR("Received error during frame transfer:\n");
dsi_vc_flush_receive_data(channel);
+ if (!error)
+ error = -EIO;
}
- dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data);
+ dsi.framedone_callback(error, dsi.framedone_data);
+
+ if (!error)
+ dsi_perf_show("DISPC");
}
-static void dsi_framedone_irq_callback(void *data, u32 mask)
+static void dsi_framedone_timeout_work_callback(struct work_struct *work)
{
- /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
- * turns itself off. However, DSI still has the pixels in its buffers,
- * and is sending the data.
- */
+ /* XXX While extremely unlikely, we could get FRAMEDONE interrupt after
+ * 250ms which would conflict with this timeout work. What should be
+ * done is first cancel the transfer on the HW, and then cancel the
+ * possibly scheduled framedone work. However, cancelling the transfer
+ * on the HW is buggy, and would probably require resetting the whole
+ * DSI */
- /* SIDLEMODE back to smart-idle */
- dispc_enable_sidle();
+ DSSERR("Framedone not received for 250ms!\n");
- schedule_work(&dsi.framedone_work);
+ dsi_handle_framedone(-ETIMEDOUT);
}
-static void dsi_handle_framedone(void)
+static void dsi_framedone_bta_callback(void)
+{
+ dsi_handle_framedone(0);
+
+#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
+ dispc_fake_vsync_irq();
+#endif
+}
+
+static void dsi_framedone_irq_callback(void *data, u32 mask)
{
- int r;
const int channel = dsi.update_channel;
+ int r;
- DSSDBG("FRAMEDONE\n");
+ /* Note: We get FRAMEDONE when DISPC has finished sending pixels and
+ * turns itself off. However, DSI still has the pixels in its buffers,
+ * and is sending the data.
+ */
if (dsi.te_enabled) {
/* enable LP_RX_TO again after the TE */
@@ -2904,37 +2839,30 @@ static void dsi_handle_framedone(void)
* This is not needed when TE is not in use, but we do it anyway to
* make sure that the transfer has been completed. It would be more
* optimal, but more complex, to wait only just before starting next
- * transfer. */
- r = dsi_vc_send_bta_sync(channel);
- if (r)
- DSSERR("BTA after framedone failed\n");
-
- /* RX_FIFO_NOT_EMPTY */
- if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) {
- DSSERR("Received error during frame transfer:\n");
- dsi_vc_flush_receive_data(channel);
- }
-
-#ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC
- dispc_fake_vsync_irq();
-#endif
-}
-
-static void dsi_framedone_work_callback(struct work_struct *work)
-{
- DSSDBGF();
+ * transfer.
+ *
+ * Also, as there's no interrupt telling when the transfer has been
+ * done and the channel could be reconfigured, the only way is to
+ * busyloop until TE_SIZE is zero. With BTA we can do this
+ * asynchronously.
+ * */
- cancel_delayed_work_sync(&dsi.framedone_timeout_work);
+ dsi.bta_callback = dsi_framedone_bta_callback;
- dsi_handle_framedone();
+ barrier();
- dsi_perf_show("DISPC");
+ dsi_vc_enable_bta_irq(channel);
- dsi.framedone_callback(0, dsi.framedone_data);
+ r = dsi_vc_send_bta(channel);
+ if (r) {
+ DSSERR("BTA after framedone failed\n");
+ dsi_handle_framedone(-EIO);
+ }
}
int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
- u16 *x, u16 *y, u16 *w, u16 *h)
+ u16 *x, u16 *y, u16 *w, u16 *h,
+ bool enlarge_update_area)
{
u16 dw, dh;
@@ -2958,7 +2886,8 @@ int omap_dsi_prepare_update(struct omap_dss_device *dssdev,
dsi_perf_mark_setup();
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dss_setup_partial_planes(dssdev, x, y, w, h);
+ dss_setup_partial_planes(dssdev, x, y, w, h,
+ enlarge_update_area);
dispc_set_lcd_size(*w, *h);
}
@@ -2973,6 +2902,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
{
dsi.update_channel = channel;
+ /* OMAP DSS cannot send updates of odd widths.
+ * omap_dsi_prepare_update() makes the widths even, but add a BUG_ON
+ * here to make sure we catch erroneous updates. Otherwise we'll only
+ * see rather obscure HW error happening, as DSS halts. */
+ BUG_ON(x % 2 == 1);
+
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
dsi.framedone_callback = callback;
dsi.framedone_data = data;
@@ -2985,7 +2920,12 @@ int omap_dsi_update(struct omap_dss_device *dssdev,
dsi_update_screen_dispc(dssdev, x, y, w, h);
} else {
- dsi_update_screen_l4(dssdev, x, y, w, h);
+ int r;
+
+ r = dsi_update_screen_l4(dssdev, x, y, w, h);
+ if (r)
+ return r;
+
dsi_perf_show("L4");
callback(0, data);
}
@@ -3048,8 +2988,10 @@ static int dsi_configure_dsi_clocks(struct omap_dss_device *dssdev)
cinfo.regm3 = dssdev->phy.dsi.div.regm3;
cinfo.regm4 = dssdev->phy.dsi.div.regm4;
r = dsi_calc_clock_rates(&cinfo);
- if (r)
+ if (r) {
+ DSSERR("Failed to calc dsi clocks\n");
return r;
+ }
r = dsi_pll_set_clock_div(&cinfo);
if (r) {
@@ -3147,6 +3089,13 @@ err0:
static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev)
{
+ /* disable interface */
+ dsi_if_enable(0);
+ dsi_vc_enable(0, 0);
+ dsi_vc_enable(1, 0);
+ dsi_vc_enable(2, 0);
+ dsi_vc_enable(3, 0);
+
dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK);
dsi_complexio_uninit();
@@ -3257,7 +3206,7 @@ void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
burst_size_bytes = 16 * 32 / 8;
*fifo_high = fifo_size - burst_size_bytes;
- *fifo_low = fifo_size - burst_size_bytes * 8;
+ *fifo_low = fifo_size - burst_size_bytes * 2;
}
int dsi_init_display(struct omap_dss_device *dssdev)
@@ -3274,6 +3223,18 @@ int dsi_init_display(struct omap_dss_device *dssdev)
return 0;
}
+void dsi_wait_dsi1_pll_active(void)
+{
+ if (wait_for_bit_change(DSI_PLL_STATUS, 7, 1) != 1)
+ DSSERR("DSI1 PLL clock not active\n");
+}
+
+void dsi_wait_dsi2_pll_active(void)
+{
+ if (wait_for_bit_change(DSI_PLL_STATUS, 8, 1) != 1)
+ DSSERR("DSI2 PLL clock not active\n");
+}
+
int dsi_init(struct platform_device *pdev)
{
u32 rev;
@@ -3292,7 +3253,10 @@ int dsi_init(struct platform_device *pdev)
mutex_init(&dsi.lock);
sema_init(&dsi.bus_lock, 1);
- INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback);
+ dsi.workqueue = create_singlethread_workqueue("dsi");
+ if (dsi.workqueue == NULL)
+ return -ENOMEM;
+
INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work,
dsi_framedone_timeout_work_callback);
@@ -3328,6 +3292,7 @@ int dsi_init(struct platform_device *pdev)
err2:
iounmap(dsi.base);
err1:
+ destroy_workqueue(dsi.workqueue);
return r;
}
@@ -3335,6 +3300,8 @@ void dsi_exit(void)
{
iounmap(dsi.base);
+ destroy_workqueue(dsi.workqueue);
+
DSSDBG("omap_dsi_exit\n");
}
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
index 24b18258654f..77c3621c9171 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/omap2/dss/dss.c
@@ -265,6 +265,9 @@ void dss_select_dispc_clk_source(enum dss_clk_source clk_src)
b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+ if (clk_src == DSS_SRC_DSI1_PLL_FCLK)
+ dsi_wait_dsi1_pll_active();
+
REG_FLD_MOD(DSS_CONTROL, b, 0, 0); /* DISPC_CLK_SWITCH */
dss.dispc_clk_source = clk_src;
@@ -279,6 +282,9 @@ void dss_select_dsi_clk_source(enum dss_clk_source clk_src)
b = clk_src == DSS_SRC_DSS1_ALWON_FCLK ? 0 : 1;
+ if (clk_src == DSS_SRC_DSI2_PLL_FCLK)
+ dsi_wait_dsi2_pll_active();
+
REG_FLD_MOD(DSS_CONTROL, b, 1, 1); /* DSI_CLK_SWITCH */
dss.dsi_clk_source = clk_src;
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index 786f433fd571..5c7940d5f282 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -199,7 +199,8 @@ int dss_init_overlay_managers(struct platform_device *pdev);
void dss_uninit_overlay_managers(struct platform_device *pdev);
int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl);
void dss_setup_partial_planes(struct omap_dss_device *dssdev,
- u16 *x, u16 *y, u16 *w, u16 *h);
+ u16 *x, u16 *y, u16 *w, u16 *h,
+ bool enlarge_update_area);
void dss_start_update(struct omap_dss_device *dssdev);
/* overlay */
@@ -281,6 +282,8 @@ void dsi_pll_uninit(void);
void dsi_get_overlay_fifo_thresholds(enum omap_plane plane,
u32 fifo_size, enum omap_burst_size *burst_size,
u32 *fifo_low, u32 *fifo_high);
+void dsi_wait_dsi1_pll_active(void);
+void dsi_wait_dsi2_pll_active(void);
#else
static inline int dsi_init(struct platform_device *pdev)
{
@@ -289,6 +292,12 @@ static inline int dsi_init(struct platform_device *pdev)
static inline void dsi_exit(void)
{
}
+static inline void dsi_wait_dsi1_pll_active(void)
+{
+}
+static inline void dsi_wait_dsi2_pll_active(void)
+{
+}
#endif
/* DPI */
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/omap2/dss/manager.c
index 9e1fbe531bf0..6a649ab5539e 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/omap2/dss/manager.c
@@ -440,6 +440,10 @@ struct manager_cache_data {
/* manual update region */
u16 x, y, w, h;
+
+ /* enlarge the update area if the update area contains scaled
+ * overlays */
+ bool enlarge_update_area;
};
static struct {
@@ -525,7 +529,7 @@ static int dss_mgr_wait_for_go(struct omap_overlay_manager *mgr)
int i;
struct omap_dss_device *dssdev = mgr->device;
- if (!dssdev)
+ if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return 0;
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
@@ -596,11 +600,14 @@ int dss_mgr_wait_for_go_ovl(struct omap_overlay *ovl)
int r;
int i;
- if (!ovl->manager || !ovl->manager->device)
+ if (!ovl->manager)
return 0;
dssdev = ovl->manager->device;
+ if (!dssdev || dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
+ return 0;
+
if (dssdev->type == OMAP_DISPLAY_TYPE_VENC) {
irq = DISPC_IRQ_EVSYNC_ODD | DISPC_IRQ_EVSYNC_EVEN;
channel = OMAP_DSS_CHANNEL_DIGIT;
@@ -718,6 +725,7 @@ static int configure_overlay(enum omap_plane plane)
u16 x, y, w, h;
u32 paddr;
int r;
+ u16 orig_w, orig_h, orig_outw, orig_outh;
DSSDBGF("%d", plane);
@@ -738,8 +746,16 @@ static int configure_overlay(enum omap_plane plane)
outh = c->out_height == 0 ? c->height : c->out_height;
paddr = c->paddr;
+ orig_w = w;
+ orig_h = h;
+ orig_outw = outw;
+ orig_outh = outh;
+
if (c->manual_update && mc->do_manual_update) {
unsigned bpp;
+ unsigned scale_x_m = w, scale_x_d = outw;
+ unsigned scale_y_m = h, scale_y_d = outh;
+
/* If the overlay is outside the update region, disable it */
if (!rectangle_intersects(mc->x, mc->y, mc->w, mc->h,
x, y, outw, outh)) {
@@ -770,38 +786,47 @@ static int configure_overlay(enum omap_plane plane)
BUG();
}
- if (dispc_is_overlay_scaled(c)) {
- /* If the overlay is scaled, the update area has
- * already been enlarged to cover the whole overlay. We
- * only need to adjust x/y here */
- x = c->pos_x - mc->x;
- y = c->pos_y - mc->y;
+ if (mc->x > c->pos_x) {
+ x = 0;
+ outw -= (mc->x - c->pos_x);
+ paddr += (mc->x - c->pos_x) *
+ scale_x_m / scale_x_d * bpp / 8;
} else {
- if (mc->x > c->pos_x) {
- x = 0;
- w -= (mc->x - c->pos_x);
- paddr += (mc->x - c->pos_x) * bpp / 8;
- } else {
- x = c->pos_x - mc->x;
- }
-
- if (mc->y > c->pos_y) {
- y = 0;
- h -= (mc->y - c->pos_y);
- paddr += (mc->y - c->pos_y) * c->screen_width *
- bpp / 8;
- } else {
- y = c->pos_y - mc->y;
- }
-
- if (mc->w < (x+w))
- w -= (x+w) - (mc->w);
+ x = c->pos_x - mc->x;
+ }
- if (mc->h < (y+h))
- h -= (y+h) - (mc->h);
+ if (mc->y > c->pos_y) {
+ y = 0;
+ outh -= (mc->y - c->pos_y);
+ paddr += (mc->y - c->pos_y) *
+ scale_y_m / scale_y_d *
+ c->screen_width * bpp / 8;
+ } else {
+ y = c->pos_y - mc->y;
+ }
- outw = w;
- outh = h;
+ if (mc->w < (x + outw))
+ outw -= (x + outw) - (mc->w);
+
+ if (mc->h < (y + outh))
+ outh -= (y + outh) - (mc->h);
+
+ w = w * outw / orig_outw;
+ h = h * outh / orig_outh;
+
+ /* YUV mode overlay's input width has to be even and the
+ * algorithm above may adjust the width to be odd.
+ *
+ * Here we adjust the width if needed, preferring to increase
+ * the width if the original width was bigger.
+ */
+ if ((w & 1) &&
+ (c->color_mode == OMAP_DSS_COLOR_YUV2 ||
+ c->color_mode == OMAP_DSS_COLOR_UYVY)) {
+ if (orig_w > w)
+ w += 1;
+ else
+ w -= 1;
}
}
@@ -960,7 +985,7 @@ static void make_even(u16 *x, u16 *w)
/* Configure dispc for partial update. Return possibly modified update
* area */
void dss_setup_partial_planes(struct omap_dss_device *dssdev,
- u16 *xi, u16 *yi, u16 *wi, u16 *hi)
+ u16 *xi, u16 *yi, u16 *wi, u16 *hi, bool enlarge_update_area)
{
struct overlay_cache_data *oc;
struct manager_cache_data *mc;
@@ -969,6 +994,7 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
int i;
u16 x, y, w, h;
unsigned long flags;
+ bool area_changed;
x = *xi;
y = *yi;
@@ -989,73 +1015,91 @@ void dss_setup_partial_planes(struct omap_dss_device *dssdev,
spin_lock_irqsave(&dss_cache.lock, flags);
- /* We need to show the whole overlay if it is scaled. So look for
- * those, and make the update area larger if found.
- * Also mark the overlay cache dirty */
- for (i = 0; i < num_ovls; ++i) {
- unsigned x1, y1, x2, y2;
- unsigned outw, outh;
+ /*
+ * Execute the outer loop until the inner loop has completed
+ * once without increasing the update area. This will ensure that
+ * all scaled overlays end up completely within the update area.
+ */
+ do {
+ area_changed = false;
- oc = &dss_cache.overlay_cache[i];
+ /* We need to show the whole overlay if it is scaled. So look
+ * for those, and make the update area larger if found.
+ * Also mark the overlay cache dirty */
+ for (i = 0; i < num_ovls; ++i) {
+ unsigned x1, y1, x2, y2;
+ unsigned outw, outh;
- if (oc->channel != mgr->id)
- continue;
+ oc = &dss_cache.overlay_cache[i];
- oc->dirty = true;
+ if (oc->channel != mgr->id)
+ continue;
- if (!oc->enabled)
- continue;
+ oc->dirty = true;
- if (!dispc_is_overlay_scaled(oc))
- continue;
+ if (!enlarge_update_area)
+ continue;
- outw = oc->out_width == 0 ? oc->width : oc->out_width;
- outh = oc->out_height == 0 ? oc->height : oc->out_height;
+ if (!oc->enabled)
+ continue;
- /* is the overlay outside the update region? */
- if (!rectangle_intersects(x, y, w, h,
- oc->pos_x, oc->pos_y,
- outw, outh))
- continue;
+ if (!dispc_is_overlay_scaled(oc))
+ continue;
- /* if the overlay totally inside the update region? */
- if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
- x, y, w, h))
- continue;
+ outw = oc->out_width == 0 ?
+ oc->width : oc->out_width;
+ outh = oc->out_height == 0 ?
+ oc->height : oc->out_height;
+
+ /* is the overlay outside the update region? */
+ if (!rectangle_intersects(x, y, w, h,
+ oc->pos_x, oc->pos_y,
+ outw, outh))
+ continue;
- if (x > oc->pos_x)
- x1 = oc->pos_x;
- else
- x1 = x;
+ /* if the overlay totally inside the update region? */
+ if (rectangle_subset(oc->pos_x, oc->pos_y, outw, outh,
+ x, y, w, h))
+ continue;
- if (y > oc->pos_y)
- y1 = oc->pos_y;
- else
- y1 = y;
+ if (x > oc->pos_x)
+ x1 = oc->pos_x;
+ else
+ x1 = x;
- if ((x + w) < (oc->pos_x + outw))
- x2 = oc->pos_x + outw;
- else
- x2 = x + w;
+ if (y > oc->pos_y)
+ y1 = oc->pos_y;
+ else
+ y1 = y;
- if ((y + h) < (oc->pos_y + outh))
- y2 = oc->pos_y + outh;
- else
- y2 = y + h;
+ if ((x + w) < (oc->pos_x + outw))
+ x2 = oc->pos_x + outw;
+ else
+ x2 = x + w;
- x = x1;
- y = y1;
- w = x2 - x1;
- h = y2 - y1;
+ if ((y + h) < (oc->pos_y + outh))
+ y2 = oc->pos_y + outh;
+ else
+ y2 = y + h;
- make_even(&x, &w);
+ x = x1;
+ y = y1;
+ w = x2 - x1;
+ h = y2 - y1;
- DSSDBG("changing upd area due to ovl(%d) scaling %d,%d %dx%d\n",
+ make_even(&x, &w);
+
+ DSSDBG("changing upd area due to ovl(%d) "
+ "scaling %d,%d %dx%d\n",
i, x, y, w, h);
- }
+
+ area_changed = true;
+ }
+ } while (area_changed);
mc = &dss_cache.manager_cache[mgr->id];
mc->do_manual_update = true;
+ mc->enlarge_update_area = enlarge_update_area;
mc->x = x;
mc->y = y;
mc->w = w;
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/omap2/dss/overlay.c
index 82336583adef..244dca81a399 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/omap2/dss/overlay.c
@@ -65,7 +65,7 @@ static ssize_t overlay_manager_store(struct omap_overlay *ovl, const char *buf,
for (i = 0; i < omap_dss_get_num_overlay_managers(); ++i) {
mgr = omap_dss_get_overlay_manager(i);
- if (strncmp(buf, mgr->name, len) == 0)
+ if (sysfs_streq(buf, mgr->name))
break;
mgr = NULL;
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c
index cc23f53cc62d..bbe62464e92d 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/omap2/dss/rfbi.c
@@ -886,7 +886,7 @@ int omap_rfbi_prepare_update(struct omap_dss_device *dssdev,
return -EINVAL;
if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) {
- dss_setup_partial_planes(dssdev, x, y, w, h);
+ dss_setup_partial_planes(dssdev, x, y, w, h, true);
dispc_set_lcd_size(*w, *h);
}
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/omap2/omapfb/omapfb-ioctl.c
index 9c7361871d78..6f435450987e 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/omap2/omapfb/omapfb-ioctl.c
@@ -34,12 +34,37 @@
#include "omapfb.h"
+static u8 get_mem_idx(struct omapfb_info *ofbi)
+{
+ if (ofbi->id == ofbi->region->id)
+ return 0;
+
+ return OMAPFB_MEM_IDX_ENABLED | ofbi->region->id;
+}
+
+static struct omapfb2_mem_region *get_mem_region(struct omapfb_info *ofbi,
+ u8 mem_idx)
+{
+ struct omapfb2_device *fbdev = ofbi->fbdev;
+
+ if (mem_idx & OMAPFB_MEM_IDX_ENABLED)
+ mem_idx &= OMAPFB_MEM_IDX_MASK;
+ else
+ mem_idx = ofbi->id;
+
+ if (mem_idx >= fbdev->num_fbs)
+ return NULL;
+
+ return &fbdev->regions[mem_idx];
+}
+
static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
struct omapfb2_device *fbdev = ofbi->fbdev;
struct omap_overlay *ovl;
- struct omap_overlay_info info;
+ struct omap_overlay_info old_info;
+ struct omapfb2_mem_region *old_rg, *new_rg;
int r = 0;
DBG("omapfb_setup_plane\n");
@@ -52,36 +77,106 @@ static int omapfb_setup_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
/* XXX uses only the first overlay */
ovl = ofbi->overlays[0];
- if (pi->enabled && !ofbi->region.size) {
+ old_rg = ofbi->region;
+ new_rg = get_mem_region(ofbi, pi->mem_idx);
+ if (!new_rg) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ /* Take the locks in a specific order to keep lockdep happy */
+ if (old_rg->id < new_rg->id) {
+ omapfb_get_mem_region(old_rg);
+ omapfb_get_mem_region(new_rg);
+ } else if (new_rg->id < old_rg->id) {
+ omapfb_get_mem_region(new_rg);
+ omapfb_get_mem_region(old_rg);
+ } else
+ omapfb_get_mem_region(old_rg);
+
+ if (pi->enabled && !new_rg->size) {
/*
* This plane's memory was freed, can't enable it
* until it's reallocated.
*/
r = -EINVAL;
- goto out;
+ goto put_mem;
}
- ovl->get_overlay_info(ovl, &info);
+ ovl->get_overlay_info(ovl, &old_info);
- info.pos_x = pi->pos_x;
- info.pos_y = pi->pos_y;
- info.out_width = pi->out_width;
- info.out_height = pi->out_height;
- info.enabled = pi->enabled;
+ if (old_rg != new_rg) {
+ ofbi->region = new_rg;
+ set_fb_fix(fbi);
+ }
- r = ovl->set_overlay_info(ovl, &info);
- if (r)
- goto out;
+ if (pi->enabled) {
+ struct omap_overlay_info info;
- if (ovl->manager) {
- r = ovl->manager->apply(ovl->manager);
+ r = omapfb_setup_overlay(fbi, ovl, pi->pos_x, pi->pos_y,
+ pi->out_width, pi->out_height);
if (r)
- goto out;
+ goto undo;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ if (!info.enabled) {
+ info.enabled = pi->enabled;
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ goto undo;
+ }
+ } else {
+ struct omap_overlay_info info;
+
+ ovl->get_overlay_info(ovl, &info);
+
+ info.enabled = pi->enabled;
+ info.pos_x = pi->pos_x;
+ info.pos_y = pi->pos_y;
+ info.out_width = pi->out_width;
+ info.out_height = pi->out_height;
+
+ r = ovl->set_overlay_info(ovl, &info);
+ if (r)
+ goto undo;
}
-out:
- if (r)
- dev_err(fbdev->dev, "setup_plane failed\n");
+ if (ovl->manager)
+ ovl->manager->apply(ovl->manager);
+
+ /* Release the locks in a specific order to keep lockdep happy */
+ if (old_rg->id > new_rg->id) {
+ omapfb_put_mem_region(old_rg);
+ omapfb_put_mem_region(new_rg);
+ } else if (new_rg->id > old_rg->id) {
+ omapfb_put_mem_region(new_rg);
+ omapfb_put_mem_region(old_rg);
+ } else
+ omapfb_put_mem_region(old_rg);
+
+ return 0;
+
+ undo:
+ if (old_rg != new_rg) {
+ ofbi->region = old_rg;
+ set_fb_fix(fbi);
+ }
+
+ ovl->set_overlay_info(ovl, &old_info);
+ put_mem:
+ /* Release the locks in a specific order to keep lockdep happy */
+ if (old_rg->id > new_rg->id) {
+ omapfb_put_mem_region(old_rg);
+ omapfb_put_mem_region(new_rg);
+ } else if (new_rg->id > old_rg->id) {
+ omapfb_put_mem_region(new_rg);
+ omapfb_put_mem_region(old_rg);
+ } else
+ omapfb_put_mem_region(old_rg);
+ out:
+ dev_err(fbdev->dev, "setup_plane failed\n");
+
return r;
}
@@ -92,8 +187,8 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
if (ofbi->num_overlays != 1) {
memset(pi, 0, sizeof(*pi));
} else {
- struct omap_overlay_info *ovli;
struct omap_overlay *ovl;
+ struct omap_overlay_info *ovli;
ovl = ofbi->overlays[0];
ovli = &ovl->info;
@@ -103,6 +198,7 @@ static int omapfb_query_plane(struct fb_info *fbi, struct omapfb_plane_info *pi)
pi->enabled = ovli->enabled;
pi->channel_out = 0; /* xxx */
pi->mirror = 0;
+ pi->mem_idx = get_mem_idx(ofbi);
pi->out_width = ovli->out_width;
pi->out_height = ovli->out_height;
}
@@ -115,7 +211,7 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
struct omapfb_info *ofbi = FB2OFB(fbi);
struct omapfb2_device *fbdev = ofbi->fbdev;
struct omapfb2_mem_region *rg;
- int r, i;
+ int r = 0, i;
size_t size;
if (mi->type > OMAPFB_MEMTYPE_MAX)
@@ -123,22 +219,44 @@ static int omapfb_setup_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
size = PAGE_ALIGN(mi->size);
- rg = &ofbi->region;
+ rg = ofbi->region;
- for (i = 0; i < ofbi->num_overlays; i++) {
- if (ofbi->overlays[i]->info.enabled)
- return -EBUSY;
+ down_write_nested(&rg->lock, rg->id);
+ atomic_inc(&rg->lock_count);
+
+ if (atomic_read(&rg->map_count)) {
+ r = -EBUSY;
+ goto out;
+ }
+
+ for (i = 0; i < fbdev->num_fbs; i++) {
+ struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+ int j;
+
+ if (ofbi2->region != rg)
+ continue;
+
+ for (j = 0; j < ofbi2->num_overlays; j++) {
+ if (ofbi2->overlays[j]->info.enabled) {
+ r = -EBUSY;
+ goto out;
+ }
+ }
}
if (rg->size != size || rg->type != mi->type) {
r = omapfb_realloc_fbmem(fbi, size, mi->type);
if (r) {
dev_err(fbdev->dev, "realloc fbmem failed\n");
- return r;
+ goto out;
}
}
- return 0;
+ out:
+ atomic_dec(&rg->lock_count);
+ up_write(&rg->lock);
+
+ return r;
}
static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
@@ -146,12 +264,14 @@ static int omapfb_query_mem(struct fb_info *fbi, struct omapfb_mem_info *mi)
struct omapfb_info *ofbi = FB2OFB(fbi);
struct omapfb2_mem_region *rg;
- rg = &ofbi->region;
+ rg = omapfb_get_mem_region(ofbi->region);
memset(mi, 0, sizeof(*mi));
mi->size = rg->size;
mi->type = rg->type;
+ omapfb_put_mem_region(rg);
+
return 0;
}
@@ -490,6 +610,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
struct omapfb_vram_info vram_info;
struct omapfb_tearsync_info tearsync_info;
struct omapfb_display_info display_info;
+ u32 crt;
} p;
int r = 0;
@@ -648,6 +769,17 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
r = -EFAULT;
break;
+ case FBIO_WAITFORVSYNC:
+ if (get_user(p.crt, (__u32 __user *)arg)) {
+ r = -EFAULT;
+ break;
+ }
+ if (p.crt != 0) {
+ r = -ENODEV;
+ break;
+ }
+ /* FALLTHROUGH */
+
case OMAPFB_WAITFORVSYNC:
DBG("ioctl WAITFORVSYNC\n");
if (!display) {
@@ -738,7 +870,7 @@ int omapfb_ioctl(struct fb_info *fbi, unsigned int cmd, unsigned long arg)
break;
}
- if (!display->driver->enable_te) {
+ if (!display || !display->driver->enable_te) {
r = -ENODEV;
break;
}
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 4b4506da96da..04034d410d6d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -157,7 +157,7 @@ static void fill_fb(struct fb_info *fbi)
static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
{
- const struct vrfb *vrfb = &ofbi->region.vrfb;
+ const struct vrfb *vrfb = &ofbi->region->vrfb;
unsigned offset;
switch (rot) {
@@ -185,27 +185,27 @@ static unsigned omapfb_get_vrfb_offset(const struct omapfb_info *ofbi, int rot)
static u32 omapfb_get_region_rot_paddr(const struct omapfb_info *ofbi, int rot)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
- return ofbi->region.vrfb.paddr[rot]
+ return ofbi->region->vrfb.paddr[rot]
+ omapfb_get_vrfb_offset(ofbi, rot);
} else {
- return ofbi->region.paddr;
+ return ofbi->region->paddr;
}
}
static u32 omapfb_get_region_paddr(const struct omapfb_info *ofbi)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
- return ofbi->region.vrfb.paddr[0];
+ return ofbi->region->vrfb.paddr[0];
else
- return ofbi->region.paddr;
+ return ofbi->region->paddr;
}
static void __iomem *omapfb_get_region_vaddr(const struct omapfb_info *ofbi)
{
if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
- return ofbi->region.vrfb.vaddr[0];
+ return ofbi->region->vrfb.vaddr[0];
else
- return ofbi->region.vaddr;
+ return ofbi->region->vaddr;
}
static struct omapfb_colormode omapfb_colormodes[] = {
@@ -450,7 +450,7 @@ static int check_vrfb_fb_size(unsigned long region_size,
static int check_fb_size(const struct omapfb_info *ofbi,
struct fb_var_screeninfo *var)
{
- unsigned long max_frame_size = ofbi->region.size;
+ unsigned long max_frame_size = ofbi->region->size;
int bytespp = var->bits_per_pixel >> 3;
unsigned long line_size = var->xres_virtual * bytespp;
@@ -497,7 +497,7 @@ static int check_fb_size(const struct omapfb_info *ofbi,
static int setup_vrfb_rotation(struct fb_info *fbi)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
- struct omapfb2_mem_region *rg = &ofbi->region;
+ struct omapfb2_mem_region *rg = ofbi->region;
struct vrfb *vrfb = &rg->vrfb;
struct fb_var_screeninfo *var = &fbi->var;
struct fb_fix_screeninfo *fix = &fbi->fix;
@@ -558,9 +558,9 @@ static int setup_vrfb_rotation(struct fb_info *fbi)
return r;
/* used by open/write in fbmem.c */
- fbi->screen_base = ofbi->region.vrfb.vaddr[0];
+ fbi->screen_base = ofbi->region->vrfb.vaddr[0];
- fix->smem_start = ofbi->region.vrfb.paddr[0];
+ fix->smem_start = ofbi->region->vrfb.paddr[0];
switch (var->nonstd) {
case OMAPFB_COLOR_YUV422:
@@ -599,7 +599,7 @@ void set_fb_fix(struct fb_info *fbi)
struct fb_fix_screeninfo *fix = &fbi->fix;
struct fb_var_screeninfo *var = &fbi->var;
struct omapfb_info *ofbi = FB2OFB(fbi);
- struct omapfb2_mem_region *rg = &ofbi->region;
+ struct omapfb2_mem_region *rg = ofbi->region;
DBG("set_fb_fix\n");
@@ -668,8 +668,7 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
DBG("check_fb_var %d\n", ofbi->id);
- if (ofbi->region.size == 0)
- return 0;
+ WARN_ON(!atomic_read(&ofbi->region->lock_count));
r = fb_mode_to_dss_mode(var, &mode);
if (r) {
@@ -684,13 +683,14 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
}
}
- if (var->rotate < 0 || var->rotate > 3)
+ if (var->rotate > 3)
return -EINVAL;
if (check_fb_res_bounds(var))
return -EINVAL;
- if (check_fb_size(ofbi, var))
+ /* When no memory is allocated ignore the size check */
+ if (ofbi->region->size != 0 && check_fb_size(ofbi, var))
return -EINVAL;
if (var->xres + var->xoffset > var->xres_virtual)
@@ -822,9 +822,43 @@ static unsigned calc_rotation_offset_vrfb(const struct fb_var_screeninfo *var,
return offset;
}
+static void omapfb_calc_addr(const struct omapfb_info *ofbi,
+ const struct fb_var_screeninfo *var,
+ const struct fb_fix_screeninfo *fix,
+ int rotation, u32 *paddr, void __iomem **vaddr)
+{
+ u32 data_start_p;
+ void __iomem *data_start_v;
+ int offset;
+
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
+ data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
+ data_start_v = NULL;
+ } else {
+ data_start_p = omapfb_get_region_paddr(ofbi);
+ data_start_v = omapfb_get_region_vaddr(ofbi);
+ }
+
+ if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
+ offset = calc_rotation_offset_vrfb(var, fix, rotation);
+ else
+ offset = calc_rotation_offset_dma(var, fix, rotation);
+
+ data_start_p += offset;
+ data_start_v += offset;
+
+ if (offset)
+ DBG("offset %d, %d = %d\n",
+ var->xoffset, var->yoffset, offset);
+
+ DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+
+ *paddr = data_start_p;
+ *vaddr = data_start_v;
+}
/* setup overlay according to the fb */
-static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
u16 posx, u16 posy, u16 outw, u16 outh)
{
int r = 0;
@@ -832,9 +866,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
struct fb_var_screeninfo *var = &fbi->var;
struct fb_fix_screeninfo *fix = &fbi->fix;
enum omap_color_mode mode = 0;
- int offset;
- u32 data_start_p;
- void __iomem *data_start_v;
+ u32 data_start_p = 0;
+ void __iomem *data_start_v = NULL;
struct omap_overlay_info info;
int xres, yres;
int screen_width;
@@ -842,6 +875,8 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
int rotation = var->rotate;
int i;
+ WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
for (i = 0; i < ofbi->num_overlays; i++) {
if (ovl != ofbi->overlays[i])
continue;
@@ -861,28 +896,9 @@ static int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
yres = var->yres;
}
-
- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB) {
- data_start_p = omapfb_get_region_rot_paddr(ofbi, rotation);
- data_start_v = NULL;
- } else {
- data_start_p = omapfb_get_region_paddr(ofbi);
- data_start_v = omapfb_get_region_vaddr(ofbi);
- }
-
- if (ofbi->rotation_type == OMAP_DSS_ROT_VRFB)
- offset = calc_rotation_offset_vrfb(var, fix, rotation);
- else
- offset = calc_rotation_offset_dma(var, fix, rotation);
-
- data_start_p += offset;
- data_start_v += offset;
-
- if (offset)
- DBG("offset %d, %d = %d\n",
- var->xoffset, var->yoffset, offset);
-
- DBG("paddr %x, vaddr %p\n", data_start_p, data_start_v);
+ if (ofbi->region->size)
+ omapfb_calc_addr(ofbi, var, fix, rotation,
+ &data_start_p, &data_start_v);
r = fb_mode_to_dss_mode(var, &mode);
if (r) {
@@ -954,12 +970,14 @@ int omapfb_apply_changes(struct fb_info *fbi, int init)
fill_fb(fbi);
#endif
+ WARN_ON(!atomic_read(&ofbi->region->lock_count));
+
for (i = 0; i < ofbi->num_overlays; i++) {
ovl = ofbi->overlays[i];
DBG("apply_changes, fb %d, ovl %d\n", ofbi->id, ovl->id);
- if (ofbi->region.size == 0) {
+ if (ofbi->region->size == 0) {
/* the fb is not available. disable the overlay */
omapfb_overlay_enable(ovl, 0);
if (!init && ovl->manager)
@@ -1007,36 +1025,48 @@ err:
* DO NOT MODIFY PAR */
static int omapfb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi)
{
+ struct omapfb_info *ofbi = FB2OFB(fbi);
int r;
DBG("check_var(%d)\n", FB2OFB(fbi)->id);
+ omapfb_get_mem_region(ofbi->region);
+
r = check_fb_var(fbi, var);
+ omapfb_put_mem_region(ofbi->region);
+
return r;
}
/* set the video mode according to info->var */
static int omapfb_set_par(struct fb_info *fbi)
{
+ struct omapfb_info *ofbi = FB2OFB(fbi);
int r;
DBG("set_par(%d)\n", FB2OFB(fbi)->id);
+ omapfb_get_mem_region(ofbi->region);
+
set_fb_fix(fbi);
r = setup_vrfb_rotation(fbi);
if (r)
- return r;
+ goto out;
r = omapfb_apply_changes(fbi, 0);
+ out:
+ omapfb_put_mem_region(ofbi->region);
+
return r;
}
static int omapfb_pan_display(struct fb_var_screeninfo *var,
struct fb_info *fbi)
{
+ struct omapfb_info *ofbi = FB2OFB(fbi);
struct fb_var_screeninfo new_var;
int r;
@@ -1052,23 +1082,31 @@ static int omapfb_pan_display(struct fb_var_screeninfo *var,
fbi->var = new_var;
+ omapfb_get_mem_region(ofbi->region);
+
r = omapfb_apply_changes(fbi, 0);
+ omapfb_put_mem_region(ofbi->region);
+
return r;
}
static void mmap_user_open(struct vm_area_struct *vma)
{
- struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+ struct omapfb2_mem_region *rg = vma->vm_private_data;
- atomic_inc(&ofbi->map_count);
+ omapfb_get_mem_region(rg);
+ atomic_inc(&rg->map_count);
+ omapfb_put_mem_region(rg);
}
static void mmap_user_close(struct vm_area_struct *vma)
{
- struct omapfb_info *ofbi = (struct omapfb_info *)vma->vm_private_data;
+ struct omapfb2_mem_region *rg = vma->vm_private_data;
- atomic_dec(&ofbi->map_count);
+ omapfb_get_mem_region(rg);
+ atomic_dec(&rg->map_count);
+ omapfb_put_mem_region(rg);
}
static struct vm_operations_struct mmap_user_ops = {
@@ -1080,9 +1118,11 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
{
struct omapfb_info *ofbi = FB2OFB(fbi);
struct fb_fix_screeninfo *fix = &fbi->fix;
+ struct omapfb2_mem_region *rg;
unsigned long off;
unsigned long start;
u32 len;
+ int r = -EINVAL;
if (vma->vm_end - vma->vm_start == 0)
return 0;
@@ -1090,12 +1130,14 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
return -EINVAL;
off = vma->vm_pgoff << PAGE_SHIFT;
+ rg = omapfb_get_mem_region(ofbi->region);
+
start = omapfb_get_region_paddr(ofbi);
len = fix->smem_len;
if (off >= len)
- return -EINVAL;
+ goto error;
if ((vma->vm_end - vma->vm_start + off) > len)
- return -EINVAL;
+ goto error;
off += start;
@@ -1105,13 +1147,25 @@ static int omapfb_mmap(struct fb_info *fbi, struct vm_area_struct *vma)
vma->vm_flags |= VM_IO | VM_RESERVED;
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
vma->vm_ops = &mmap_user_ops;
- vma->vm_private_data = ofbi;
+ vma->vm_private_data = rg;
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
- vma->vm_end - vma->vm_start, vma->vm_page_prot))
- return -EAGAIN;
+ vma->vm_end - vma->vm_start,
+ vma->vm_page_prot)) {
+ r = -EAGAIN;
+ goto error;
+ }
+
/* vm_ops.open won't be called for mmap itself. */
- atomic_inc(&ofbi->map_count);
+ atomic_inc(&rg->map_count);
+
+ omapfb_put_mem_region(rg);
+
return 0;
+
+ error:
+ omapfb_put_mem_region(ofbi->region);
+
+ return r;
}
/* Store a single color palette entry into a pseudo palette or the hardware
@@ -1154,11 +1208,6 @@ static int _setcolreg(struct fb_info *fbi, u_int regno, u_int red, u_int green,
if (r != 0)
break;
- if (regno < 0) {
- r = -EINVAL;
- break;
- }
-
if (regno < 16) {
u16 pal;
pal = ((red >> (16 - var->red.length)) <<
@@ -1217,6 +1266,9 @@ static int omapfb_blank(int blank, struct fb_info *fbi)
int do_update = 0;
int r = 0;
+ if (!display)
+ return -EINVAL;
+
omapfb_lock(fbdev);
switch (blank) {
@@ -1300,7 +1352,9 @@ static void omapfb_free_fbmem(struct fb_info *fbi)
struct omapfb2_device *fbdev = ofbi->fbdev;
struct omapfb2_mem_region *rg;
- rg = &ofbi->region;
+ rg = ofbi->region;
+
+ WARN_ON(atomic_read(&rg->map_count));
if (rg->paddr)
if (omap_vram_free(rg->paddr, rg->size))
@@ -1355,8 +1409,15 @@ static int omapfb_alloc_fbmem(struct fb_info *fbi, unsigned long size,
void __iomem *vaddr;
int r;
- rg = &ofbi->region;
- memset(rg, 0, sizeof(*rg));
+ rg = ofbi->region;
+
+ rg->paddr = 0;
+ rg->vaddr = NULL;
+ memset(&rg->vrfb, 0, sizeof rg->vrfb);
+ rg->size = 0;
+ rg->type = 0;
+ rg->alloc = false;
+ rg->map = false;
size = PAGE_ALIGN(size);
@@ -1609,7 +1670,7 @@ static int omapfb_allocate_all_fbs(struct omapfb2_device *fbdev)
for (i = 0; i < fbdev->num_fbs; i++) {
struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
struct omapfb2_mem_region *rg;
- rg = &ofbi->region;
+ rg = ofbi->region;
DBG("region%d phys %08x virt %p size=%lu\n",
i,
@@ -1626,7 +1687,7 @@ int omapfb_realloc_fbmem(struct fb_info *fbi, unsigned long size, int type)
struct omapfb_info *ofbi = FB2OFB(fbi);
struct omapfb2_device *fbdev = ofbi->fbdev;
struct omap_dss_device *display = fb2display(fbi);
- struct omapfb2_mem_region *rg = &ofbi->region;
+ struct omapfb2_mem_region *rg = ofbi->region;
unsigned long old_size = rg->size;
unsigned long old_paddr = rg->paddr;
int old_type = rg->type;
@@ -1709,7 +1770,7 @@ static int omapfb_fb_init(struct omapfb2_device *fbdev, struct fb_info *fbi)
fbi->flags = FBINFO_FLAG_DEFAULT;
fbi->pseudo_palette = fbdev->pseudo_palette;
- if (ofbi->region.size == 0) {
+ if (ofbi->region->size == 0) {
clear_fb_info(fbi);
return 0;
}
@@ -1871,6 +1932,10 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
ofbi->fbdev = fbdev;
ofbi->id = i;
+ ofbi->region = &fbdev->regions[i];
+ ofbi->region->id = i;
+ init_rwsem(&ofbi->region->lock);
+
/* assign these early, so that fb alloc can use them */
ofbi->rotation_type = def_vrfb ? OMAP_DSS_ROT_VRFB :
OMAP_DSS_ROT_DMA;
@@ -1900,7 +1965,13 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
/* setup fb_infos */
for (i = 0; i < fbdev->num_fbs; i++) {
- r = omapfb_fb_init(fbdev, fbdev->fbs[i]);
+ struct fb_info *fbi = fbdev->fbs[i];
+ struct omapfb_info *ofbi = FB2OFB(fbi);
+
+ omapfb_get_mem_region(ofbi->region);
+ r = omapfb_fb_init(fbdev, fbi);
+ omapfb_put_mem_region(ofbi->region);
+
if (r) {
dev_err(fbdev->dev, "failed to setup fb_info\n");
return r;
@@ -1921,20 +1992,19 @@ static int omapfb_create_framebuffers(struct omapfb2_device *fbdev)
DBG("framebuffers registered\n");
for (i = 0; i < fbdev->num_fbs; i++) {
- r = omapfb_apply_changes(fbdev->fbs[i], 1);
+ struct fb_info *fbi = fbdev->fbs[i];
+ struct omapfb_info *ofbi = FB2OFB(fbi);
+
+ omapfb_get_mem_region(ofbi->region);
+ r = omapfb_apply_changes(fbi, 1);
+ omapfb_put_mem_region(ofbi->region);
+
if (r) {
dev_err(fbdev->dev, "failed to change mode\n");
return r;
}
}
- DBG("create sysfs for fbs\n");
- r = omapfb_create_sysfs(fbdev);
- if (r) {
- dev_err(fbdev->dev, "failed to create sysfs entries\n");
- return r;
- }
-
/* Enable fb0 */
if (fbdev->num_fbs > 0) {
struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[0]);
@@ -1968,11 +2038,11 @@ static int omapfb_mode_to_timings(const char *mode_str,
#ifdef CONFIG_OMAP2_DSS_VENC
if (strcmp(mode_str, "pal") == 0) {
*timings = omap_dss_pal_timings;
- *bpp = 0;
+ *bpp = 24;
return 0;
} else if (strcmp(mode_str, "ntsc") == 0) {
*timings = omap_dss_ntsc_timings;
- *bpp = 0;
+ *bpp = 24;
return 0;
}
#endif
@@ -2220,6 +2290,13 @@ static int omapfb_probe(struct platform_device *pdev)
}
}
+ DBG("create sysfs for fbs\n");
+ r = omapfb_create_sysfs(fbdev);
+ if (r) {
+ dev_err(fbdev->dev, "failed to create sysfs entries\n");
+ goto cleanup;
+ }
+
return 0;
cleanup:
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/omap2/omapfb/omapfb-sysfs.c
index 5179219128bd..6f9c72cd6bb0 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/omap2/omapfb/omapfb-sysfs.c
@@ -49,6 +49,7 @@ static ssize_t store_rotate_type(struct device *dev,
{
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
+ struct omapfb2_mem_region *rg;
enum omap_dss_rotation_type rot_type;
int r;
@@ -64,9 +65,11 @@ static ssize_t store_rotate_type(struct device *dev,
if (rot_type == ofbi->rotation_type)
goto out;
- if (ofbi->region.size) {
+ rg = omapfb_get_mem_region(ofbi->region);
+
+ if (rg->size) {
r = -EBUSY;
- goto out;
+ goto put_region;
}
ofbi->rotation_type = rot_type;
@@ -75,6 +78,8 @@ static ssize_t store_rotate_type(struct device *dev,
* Since the VRAM for this FB is not allocated at the moment we don't
* need to do any further parameter checking at this point.
*/
+put_region:
+ omapfb_put_mem_region(rg);
out:
unlock_fb_info(fbi);
@@ -97,7 +102,7 @@ static ssize_t store_mirror(struct device *dev,
{
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
- bool mirror;
+ unsigned long mirror;
int r;
struct fb_var_screeninfo new_var;
@@ -111,6 +116,8 @@ static ssize_t store_mirror(struct device *dev,
ofbi->mirror = mirror;
+ omapfb_get_mem_region(ofbi->region);
+
memcpy(&new_var, &fbi->var, sizeof(new_var));
r = check_fb_var(fbi, &new_var);
if (r)
@@ -125,6 +132,8 @@ static ssize_t store_mirror(struct device *dev,
r = count;
out:
+ omapfb_put_mem_region(ofbi->region);
+
unlock_fb_info(fbi);
return r;
@@ -263,11 +272,15 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
DBG("detaching %d\n", ofbi->overlays[i]->id);
+ omapfb_get_mem_region(ofbi->region);
+
omapfb_overlay_enable(ovl, 0);
if (ovl->manager)
ovl->manager->apply(ovl->manager);
+ omapfb_put_mem_region(ofbi->region);
+
for (t = i + 1; t < ofbi->num_overlays; t++) {
ofbi->rotation[t-1] = ofbi->rotation[t];
ofbi->overlays[t-1] = ofbi->overlays[t];
@@ -300,7 +313,12 @@ static ssize_t store_overlays(struct device *dev, struct device_attribute *attr,
}
if (added) {
+ omapfb_get_mem_region(ofbi->region);
+
r = omapfb_apply_changes(fbi, 0);
+
+ omapfb_put_mem_region(ofbi->region);
+
if (r)
goto out;
}
@@ -388,7 +406,12 @@ static ssize_t store_overlays_rotate(struct device *dev,
for (i = 0; i < num_ovls; ++i)
ofbi->rotation[i] = rotation[i];
+ omapfb_get_mem_region(ofbi->region);
+
r = omapfb_apply_changes(fbi, 0);
+
+ omapfb_put_mem_region(ofbi->region);
+
if (r)
goto out;
@@ -408,7 +431,7 @@ static ssize_t show_size(struct device *dev,
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
- return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region.size);
+ return snprintf(buf, PAGE_SIZE, "%lu\n", ofbi->region->size);
}
static ssize_t store_size(struct device *dev, struct device_attribute *attr,
@@ -416,6 +439,8 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
{
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
+ struct omapfb2_device *fbdev = ofbi->fbdev;
+ struct omapfb2_mem_region *rg;
unsigned long size;
int r;
int i;
@@ -425,15 +450,33 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
if (!lock_fb_info(fbi))
return -ENODEV;
- for (i = 0; i < ofbi->num_overlays; i++) {
- if (ofbi->overlays[i]->info.enabled) {
- r = -EBUSY;
- goto out;
+ rg = ofbi->region;
+
+ down_write_nested(&rg->lock, rg->id);
+ atomic_inc(&rg->lock_count);
+
+ if (atomic_read(&rg->map_count)) {
+ r = -EBUSY;
+ goto out;
+ }
+
+ for (i = 0; i < fbdev->num_fbs; i++) {
+ struct omapfb_info *ofbi2 = FB2OFB(fbdev->fbs[i]);
+ int j;
+
+ if (ofbi2->region != rg)
+ continue;
+
+ for (j = 0; j < ofbi2->num_overlays; j++) {
+ if (ofbi2->overlays[j]->info.enabled) {
+ r = -EBUSY;
+ goto out;
+ }
}
}
- if (size != ofbi->region.size) {
- r = omapfb_realloc_fbmem(fbi, size, ofbi->region.type);
+ if (size != ofbi->region->size) {
+ r = omapfb_realloc_fbmem(fbi, size, ofbi->region->type);
if (r) {
dev_err(dev, "realloc fbmem failed\n");
goto out;
@@ -442,6 +485,9 @@ static ssize_t store_size(struct device *dev, struct device_attribute *attr,
r = count;
out:
+ atomic_dec(&rg->lock_count);
+ up_write(&rg->lock);
+
unlock_fb_info(fbi);
return r;
@@ -453,7 +499,7 @@ static ssize_t show_phys(struct device *dev,
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
- return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region.paddr);
+ return snprintf(buf, PAGE_SIZE, "%0x\n", ofbi->region->paddr);
}
static ssize_t show_virt(struct device *dev,
@@ -462,7 +508,7 @@ static ssize_t show_virt(struct device *dev,
struct fb_info *fbi = dev_get_drvdata(dev);
struct omapfb_info *ofbi = FB2OFB(fbi);
- return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region.vaddr);
+ return snprintf(buf, PAGE_SIZE, "%p\n", ofbi->region->vaddr);
}
static struct device_attribute omapfb_attrs[] = {
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/omap2/omapfb/omapfb.h
index cd54fdbfd8bb..1305fc9880ba 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/omap2/omapfb/omapfb.h
@@ -27,6 +27,8 @@
#define DEBUG
#endif
+#include <linux/rwsem.h>
+
#include <plat/display.h>
#ifdef DEBUG
@@ -44,6 +46,7 @@ extern unsigned int omapfb_debug;
#define OMAPFB_MAX_OVL_PER_FB 3
struct omapfb2_mem_region {
+ int id;
u32 paddr;
void __iomem *vaddr;
struct vrfb vrfb;
@@ -51,13 +54,15 @@ struct omapfb2_mem_region {
u8 type; /* OMAPFB_PLANE_MEM_* */
bool alloc; /* allocated by the driver */
bool map; /* kernel mapped by the driver */
+ atomic_t map_count;
+ struct rw_semaphore lock;
+ atomic_t lock_count;
};
/* appended to fb_info */
struct omapfb_info {
int id;
- struct omapfb2_mem_region region;
- atomic_t map_count;
+ struct omapfb2_mem_region *region;
int num_overlays;
struct omap_overlay *overlays[OMAPFB_MAX_OVL_PER_FB];
struct omapfb2_device *fbdev;
@@ -76,6 +81,7 @@ struct omapfb2_device {
unsigned num_fbs;
struct fb_info *fbs[10];
+ struct omapfb2_mem_region regions[10];
unsigned num_displays;
struct omap_dss_device *displays[10];
@@ -117,6 +123,9 @@ int omapfb_update_window(struct fb_info *fbi,
int dss_mode_to_fb_mode(enum omap_color_mode dssmode,
struct fb_var_screeninfo *var);
+int omapfb_setup_overlay(struct fb_info *fbi, struct omap_overlay *ovl,
+ u16 posx, u16 posy, u16 outw, u16 outh);
+
/* find the display connected to this fb, if any */
static inline struct omap_dss_device *fb2display(struct fb_info *fbi)
{
@@ -148,8 +157,24 @@ static inline int omapfb_overlay_enable(struct omap_overlay *ovl,
struct omap_overlay_info info;
ovl->get_overlay_info(ovl, &info);
+ if (info.enabled == enable)
+ return 0;
info.enabled = enable;
return ovl->set_overlay_info(ovl, &info);
}
+static inline struct omapfb2_mem_region *
+omapfb_get_mem_region(struct omapfb2_mem_region *rg)
+{
+ down_read_nested(&rg->lock, rg->id);
+ atomic_inc(&rg->lock_count);
+ return rg;
+}
+
+static inline void omapfb_put_mem_region(struct omapfb2_mem_region *rg)
+{
+ atomic_dec(&rg->lock_count);
+ up_read(&rg->lock);
+}
+
#endif
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 10:57:21 +0000