diff options
Diffstat (limited to 'drivers/video/omap2/dss/dsi.c')
| -rw-r--r-- | drivers/video/omap2/dss/dsi.c | 1031 |
1 files changed, 266 insertions, 765 deletions
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 6122178f5f85..3af207b2bde3 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -27,11 +27,12 @@ #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/mutex.h> +#include <linux/semaphore.h> #include <linux/seq_file.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> -#include <linux/kthread.h> #include <linux/wait.h> +#include <linux/workqueue.h> #include <plat/display.h> #include <plat/clock.h> @@ -199,7 +200,6 @@ enum dsi_vc_mode { }; struct dsi_update_region { - bool dirty; u16 x, y, w, h; struct omap_dss_device *device; }; @@ -224,29 +224,25 @@ static struct enum dsi_vc_mode mode; struct omap_dss_device *dssdev; enum fifo_size fifo_size; - int dest_per; /* destination peripheral 0-3 */ } vc[4]; struct mutex lock; - struct mutex bus_lock; + struct semaphore bus_lock; unsigned pll_locked; struct completion bta_completion; - struct task_struct *thread; - wait_queue_head_t waitqueue; - - spinlock_t update_lock; - bool framedone_received; + int update_channel; struct dsi_update_region update_region; - struct dsi_update_region active_update_region; - struct completion update_completion; - enum omap_dss_update_mode user_update_mode; - enum omap_dss_update_mode update_mode; bool te_enabled; - bool use_ext_te; + + struct work_struct framedone_work; + void (*framedone_callback)(int, void *); + void *framedone_data; + + struct delayed_work framedone_timeout_work; #ifdef DSI_CATCH_MISSING_TE struct timer_list te_timer; @@ -261,8 +257,6 @@ static struct #ifdef DEBUG ktime_t perf_setup_time; ktime_t perf_start_time; - ktime_t perf_start_time_auto; - int perf_measure_frames; #endif int debug_read; int debug_write; @@ -299,16 +293,21 @@ void dsi_restore_context(void) void dsi_bus_lock(void) { - mutex_lock(&dsi.bus_lock); + down(&dsi.bus_lock); } EXPORT_SYMBOL(dsi_bus_lock); void dsi_bus_unlock(void) { - mutex_unlock(&dsi.bus_lock); + up(&dsi.bus_lock); } EXPORT_SYMBOL(dsi_bus_unlock); +static bool dsi_bus_is_locked(void) +{ + return dsi.bus_lock.count == 0; +} + static inline int wait_for_bit_change(const struct dsi_reg idx, int bitnum, int value) { @@ -333,12 +332,6 @@ static void dsi_perf_mark_start(void) dsi.perf_start_time = ktime_get(); } -static void dsi_perf_mark_start_auto(void) -{ - dsi.perf_measure_frames = 0; - dsi.perf_start_time_auto = ktime_get(); -} - static void dsi_perf_show(const char *name) { ktime_t t, setup_time, trans_time; @@ -348,9 +341,6 @@ static void dsi_perf_show(const char *name) if (!dsi_perf) return; - if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED) - return; - t = ktime_get(); setup_time = ktime_sub(dsi.perf_start_time, dsi.perf_setup_time); @@ -365,76 +355,23 @@ static void dsi_perf_show(const char *name) total_us = setup_us + trans_us; - total_bytes = dsi.active_update_region.w * - dsi.active_update_region.h * - dsi.active_update_region.device->ctrl.pixel_size / 8; - - if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { - static u32 s_total_trans_us, s_total_setup_us; - static u32 s_min_trans_us = 0xffffffff, s_min_setup_us; - static u32 s_max_trans_us, s_max_setup_us; - const int numframes = 100; - ktime_t total_time_auto; - u32 total_time_auto_us; - - dsi.perf_measure_frames++; - - if (setup_us < s_min_setup_us) - s_min_setup_us = setup_us; + total_bytes = dsi.update_region.w * + dsi.update_region.h * + dsi.update_region.device->ctrl.pixel_size / 8; - if (setup_us > s_max_setup_us) - s_max_setup_us = setup_us; - - s_total_setup_us += setup_us; - - if (trans_us < s_min_trans_us) - s_min_trans_us = trans_us; - - if (trans_us > s_max_trans_us) - s_max_trans_us = trans_us; - - s_total_trans_us += trans_us; - - if (dsi.perf_measure_frames < numframes) - return; - - total_time_auto = ktime_sub(t, dsi.perf_start_time_auto); - total_time_auto_us = (u32)ktime_to_us(total_time_auto); - - printk(KERN_INFO "DSI(%s): %u fps, setup %u/%u/%u, " - "trans %u/%u/%u\n", - name, - 1000 * 1000 * numframes / total_time_auto_us, - s_min_setup_us, - s_max_setup_us, - s_total_setup_us / numframes, - s_min_trans_us, - s_max_trans_us, - s_total_trans_us / numframes); - - s_total_setup_us = 0; - s_min_setup_us = 0xffffffff; - s_max_setup_us = 0; - s_total_trans_us = 0; - s_min_trans_us = 0xffffffff; - s_max_trans_us = 0; - dsi_perf_mark_start_auto(); - } else { - printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " - "%u bytes, %u kbytes/sec\n", - name, - setup_us, - trans_us, - total_us, - 1000*1000 / total_us, - total_bytes, - total_bytes * 1000 / total_us); - } + printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), " + "%u bytes, %u kbytes/sec\n", + name, + setup_us, + trans_us, + total_us, + 1000*1000 / total_us, + total_bytes, + total_bytes * 1000 / total_us); } #else #define dsi_perf_mark_setup() #define dsi_perf_mark_start() -#define dsi_perf_mark_start_auto() #define dsi_perf_show(x) #endif @@ -774,7 +711,7 @@ static unsigned long dsi_fclk_rate(void) { unsigned long r; - if (dss_get_dsi_clk_source() == 0) { + if (dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK) { /* DSI FCLK source is DSS1_ALWON_FCK, which is dss1_fck */ r = dss_clk_get_rate(DSS_CLK_FCK1); } else { @@ -1227,17 +1164,19 @@ void dsi_dump_clocks(struct seq_file *s) seq_printf(s, "dsi1_pll_fck\t%-16luregm3 %u\t(%s)\n", cinfo->dsi1_pll_fclk, cinfo->regm3, - dss_get_dispc_clk_source() == 0 ? "off" : "on"); + dss_get_dispc_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? + "off" : "on"); seq_printf(s, "dsi2_pll_fck\t%-16luregm4 %u\t(%s)\n", cinfo->dsi2_pll_fclk, cinfo->regm4, - dss_get_dsi_clk_source() == 0 ? "off" : "on"); + dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? + "off" : "on"); seq_printf(s, "- DSI -\n"); seq_printf(s, "dsi fclk source = %s\n", - dss_get_dsi_clk_source() == 0 ? + dss_get_dsi_clk_source() == DSS_SRC_DSS1_ALWON_FCLK ? "dss1_alwon_fclk" : "dsi2_pll_fclk"); seq_printf(s, "DSI_FCLK\t%lu\n", dsi_fclk_rate()); @@ -1756,29 +1695,10 @@ static int dsi_force_tx_stop_mode_io(void) return 0; } -static void dsi_vc_print_status(int channel) -{ - u32 r; - - r = dsi_read_reg(DSI_VC_CTRL(channel)); - DSSDBG("vc %d: TX_FIFO_NOT_EMPTY %d, BTA_EN %d, VC_BUSY %d, " - "TX_FIFO_FULL %d, RX_FIFO_NOT_EMPTY %d, ", - channel, - FLD_GET(r, 5, 5), - FLD_GET(r, 6, 6), - FLD_GET(r, 15, 15), - FLD_GET(r, 16, 16), - FLD_GET(r, 20, 20)); - - r = dsi_read_reg(DSI_TX_FIFO_VC_EMPTINESS); - DSSDBG("EMPTINESS %d\n", (r >> (8 * channel)) & 0xff); -} - static int dsi_vc_enable(int channel, bool enable) { - if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) - DSSDBG("dsi_vc_enable channel %d, enable %d\n", - channel, enable); + DSSDBG("dsi_vc_enable channel %d, enable %d\n", + channel, enable); enable = enable ? 1 : 0; @@ -1859,10 +1779,12 @@ static void dsi_vc_config_vp(int channel) } -static void dsi_vc_enable_hs(int channel, bool enable) +void omapdss_dsi_vc_enable_hs(int channel, bool enable) { DSSDBG("dsi_vc_enable_hs(%d, %d)\n", channel, enable); + WARN_ON(!dsi_bus_is_locked()); + dsi_vc_enable(channel, 0); dsi_if_enable(0); @@ -1873,6 +1795,7 @@ static void dsi_vc_enable_hs(int channel, bool enable) dsi_force_tx_stop_mode_io(); } +EXPORT_SYMBOL(omapdss_dsi_vc_enable_hs); static void dsi_vc_flush_long_data(int channel) { @@ -1955,11 +1878,10 @@ static u16 dsi_vc_flush_receive_data(int channel) static int dsi_vc_send_bta(int channel) { - if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO && - (dsi.debug_write || dsi.debug_read)) + if (dsi.debug_write || dsi.debug_read) DSSDBG("dsi_vc_send_bta %d\n", channel); - WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + WARN_ON(!dsi_bus_is_locked()); if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { /* RX_FIFO_NOT_EMPTY */ DSSERR("rx fifo not empty when sending BTA, dumping data:\n"); @@ -2010,10 +1932,9 @@ static inline void dsi_vc_write_long_header(int channel, u8 data_type, u32 val; u8 data_id; - WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + WARN_ON(!dsi_bus_is_locked()); - /*data_id = data_type | channel << 6; */ - data_id = data_type | dsi.vc[channel].dest_per << 6; + data_id = data_type | channel << 6; val = FLD_VAL(data_id, 7, 0) | FLD_VAL(len, 23, 8) | FLD_VAL(ecc, 31, 24); @@ -2056,13 +1977,10 @@ static int dsi_vc_send_long(int channel, u8 data_type, u8 *data, u16 len, dsi_vc_write_long_header(channel, data_type, len, ecc); - /*dsi_vc_print_status(0); */ - p = data; for (i = 0; i < len >> 2; i++) { if (dsi.debug_write) DSSDBG("\tsending full packet %d\n", i); - /*dsi_vc_print_status(0); */ b1 = *p++; b2 = *p++; @@ -2105,7 +2023,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) u32 r; u8 data_id; - WARN_ON(!mutex_is_locked(&dsi.bus_lock)); + WARN_ON(!dsi_bus_is_locked()); if (dsi.debug_write) DSSDBG("dsi_vc_send_short(ch%d, dt %#x, b1 %#x, b2 %#x)\n", @@ -2119,7 +2037,7 @@ static int dsi_vc_send_short(int channel, u8 data_type, u16 data, u8 ecc) return -EINVAL; } - data_id = data_type | dsi.vc[channel].dest_per << 6; + data_id = data_type | channel << 6; r = (data_id << 0) | (data << 8) | (ecc << 24); @@ -2163,14 +2081,35 @@ int dsi_vc_dcs_write(int channel, u8 *data, int len) r = dsi_vc_dcs_write_nosync(channel, data, len); if (r) - return r; + goto err; r = dsi_vc_send_bta_sync(channel); + if (r) + goto err; + return 0; +err: + DSSERR("dsi_vc_dcs_write(ch %d, cmd 0x%02x, len %d) failed\n", + channel, data[0], len); return r; } EXPORT_SYMBOL(dsi_vc_dcs_write); +int dsi_vc_dcs_write_0(int channel, u8 dcs_cmd) +{ + return dsi_vc_dcs_write(channel, &dcs_cmd, 1); +} +EXPORT_SYMBOL(dsi_vc_dcs_write_0); + +int dsi_vc_dcs_write_1(int channel, u8 dcs_cmd, u8 param) +{ + u8 buf[2]; + buf[0] = dcs_cmd; + buf[1] = param; + return dsi_vc_dcs_write(channel, buf, 2); +} +EXPORT_SYMBOL(dsi_vc_dcs_write_1); + int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) { u32 val; @@ -2182,16 +2121,17 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) r = dsi_vc_send_short(channel, DSI_DT_DCS_READ, dcs_cmd, 0); if (r) - return r; + goto err; r = dsi_vc_send_bta_sync(channel); if (r) - return r; + goto err; /* RX_FIFO_NOT_EMPTY */ if (REG_GET(DSI_VC_CTRL(channel), 20, 20) == 0) { DSSERR("RX fifo empty when trying to read.\n"); - return -EIO; + r = -EIO; + goto err; } val = dsi_read_reg(DSI_VC_SHORT_PACKET_HEADER(channel)); @@ -2201,15 +2141,18 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) if (dt == DSI_DT_RX_ACK_WITH_ERR) { u16 err = FLD_GET(val, 23, 8); dsi_show_rx_ack_with_err(err); - return -EIO; + r = -EIO; + goto err; } else if (dt == DSI_DT_RX_SHORT_READ_1) { u8 data = FLD_GET(val, 15, 8); if (dsi.debug_read) DSSDBG("\tDCS short response, 1 byte: %02x\n", data); - if (buflen < 1) - return -EIO; + if (buflen < 1) { + r = -EIO; + goto err; + } buf[0] = data; @@ -2219,8 +2162,10 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) if (dsi.debug_read) DSSDBG("\tDCS short response, 2 byte: %04x\n", data); - if (buflen < 2) - return -EIO; + if (buflen < 2) { + r = -EIO; + goto err; + } buf[0] = data & 0xff; buf[1] = (data >> 8) & 0xff; @@ -2232,8 +2177,10 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) if (dsi.debug_read) DSSDBG("\tDCS long response, len %d\n", len); - if (len > buflen) - return -EIO; + if (len > buflen) { + r = -EIO; + goto err; + } /* two byte checksum ends the packet, not included in len */ for (w = 0; w < len + 2;) { @@ -2255,14 +2202,52 @@ int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen) } return len; - } else { DSSERR("\tunknown datatype 0x%02x\n", dt); - return -EIO; + r = -EIO; + goto err; } + + BUG(); +err: + DSSERR("dsi_vc_dcs_read(ch %d, cmd 0x%02x) failed\n", + channel, dcs_cmd); + return r; + } EXPORT_SYMBOL(dsi_vc_dcs_read); +int dsi_vc_dcs_read_1(int channel, u8 dcs_cmd, u8 *data) +{ + int r; + + r = dsi_vc_dcs_read(channel, dcs_cmd, data, 1); + + if (r < 0) + return r; + + if (r != 1) + return -EIO; + + return 0; +} +EXPORT_SYMBOL(dsi_vc_dcs_read_1); + +int dsi_vc_dcs_read_2(int channel, u8 dcs_cmd, u16 *data) +{ + int r; + + r = dsi_vc_dcs_read(channel, dcs_cmd, (u8 *)data, 2); + + if (r < 0) + return r; + + if (r != 2) + return -EIO; + + return 0; +} +EXPORT_SYMBOL(dsi_vc_dcs_read_2); int dsi_vc_set_max_rx_packet_size(int channel, u16 len) { @@ -2491,15 +2476,15 @@ static int dsi_proto_config(struct omap_dss_device *dssdev) u32 r; int buswidth = 0; - dsi_config_tx_fifo(DSI_FIFO_SIZE_128, - DSI_FIFO_SIZE_0, - DSI_FIFO_SIZE_0, - DSI_FIFO_SIZE_0); + dsi_config_tx_fifo(DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32); - dsi_config_rx_fifo(DSI_FIFO_SIZE_128, - DSI_FIFO_SIZE_0, - DSI_FIFO_SIZE_0, - DSI_FIFO_SIZE_0); + dsi_config_rx_fifo(DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32, + DSI_FIFO_SIZE_32); /* XXX what values for the timeouts? */ dsi_set_stop_state_counter(1000); @@ -2537,12 +2522,9 @@ static int dsi_proto_config(struct omap_dss_device *dssdev) dsi_write_reg(DSI_CTRL, r); dsi_vc_initial_config(0); - - /* set all vc targets to peripheral 0 */ - dsi.vc[0].dest_per = 0; - dsi.vc[1].dest_per = 0; - dsi.vc[2].dest_per = 0; - dsi.vc[3].dest_per = 0; + dsi_vc_initial_config(1); + dsi_vc_initial_config(2); + dsi_vc_initial_config(3); return 0; } @@ -2777,18 +2759,16 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, unsigned packet_payload; unsigned packet_len; u32 l; - bool use_te_trigger; - const unsigned channel = 0; + const unsigned channel = dsi.update_channel; /* line buffer is 1024 x 24bits */ /* XXX: for some reason using full buffer size causes considerable TX * slowdown with update sizes that fill the whole buffer */ const unsigned line_buf_size = 1023 * 3; - use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; + DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", + x, y, w, h); - if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) - DSSDBG("dsi_update_screen_dispc(%d,%d %dx%d)\n", - x, y, w, h); + dsi_vc_config_vp(channel); bytespp = dssdev->ctrl.pixel_size / 8; bytespl = w * bytespp; @@ -2808,15 +2788,12 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, if (bytespf % packet_payload) total_len += (bytespf % packet_payload) + 1; - if (0) - dsi_vc_print_status(1); - l = FLD_VAL(total_len, 23, 0); /* TE_SIZE */ dsi_write_reg(DSI_VC_TE(channel), l); dsi_vc_write_long_header(channel, DSI_DT_DCS_LONG_WRITE, packet_len, 0); - if (use_te_trigger) + if (dsi.te_enabled) l = FLD_MOD(l, 1, 30, 30); /* TE_EN */ else l = FLD_MOD(l, 1, 31, 31); /* TE_START */ @@ -2830,9 +2807,14 @@ static void dsi_update_screen_dispc(struct omap_dss_device *dssdev, */ dispc_disable_sidle(); + dsi_perf_mark_start(); + + schedule_delayed_work(&dsi.framedone_timeout_work, + msecs_to_jiffies(250)); + dss_start_update(dssdev); - if (use_te_trigger) { + if (dsi.te_enabled) { /* disable LP_RX_TO, so that we can receive TE. Time to wait * for TE is longer than the timer allows */ REG_FLD_MOD(DSI_TIMING2, 0, 15, 15); /* LP_RX_TO */ @@ -2852,110 +2834,64 @@ static void dsi_te_timeout(unsigned long arg) } #endif -static void dsi_framedone_irq_callback(void *data, u32 mask) +static void dsi_framedone_timeout_work_callback(struct work_struct *work) { - /* Note: We get FRAMEDONE when DISPC has finished sending pixels and - * turns itself off. However, DSI still has the pixels in its buffers, - * and is sending the data. - */ + int r; + const int channel = dsi.update_channel; + + DSSERR("Framedone not received for 250ms!\n"); /* SIDLEMODE back to smart-idle */ dispc_enable_sidle(); - dsi.framedone_received = true; - wake_up(&dsi.waitqueue); -} - -static void dsi_set_update_region(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h) -{ - spin_lock(&dsi.update_lock); - if (dsi.update_region.dirty) { - dsi.update_region.x = min(x, dsi.update_region.x); - dsi.update_region.y = min(y, dsi.update_region.y); - dsi.update_region.w = max(w, dsi.update_region.w); - dsi.update_region.h = max(h, dsi.update_region.h); - } else { - dsi.update_region.x = x; - dsi.update_region.y = y; - dsi.update_region.w = w; - dsi.update_region.h = h; + if (dsi.te_enabled) { + /* enable LP_RX_TO again after the TE */ + REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ } - dsi.update_region.device = dssdev; - dsi.update_region.dirty = true; - - spin_unlock(&dsi.update_lock); - -} - -static int dsi_set_update_mode(struct omap_dss_device *dssdev, - enum omap_dss_update_mode mode) -{ - int r = 0; - int i; - - WARN_ON(!mutex_is_locked(&dsi.bus_lock)); - - if (dsi.update_mode != mode) { - dsi.update_mode = mode; - - /* Mark the overlays dirty, and do apply(), so that we get the - * overlays configured properly after update mode change. */ - for (i = 0; i < omap_dss_get_num_overlays(); ++i) { - struct omap_overlay *ovl; - ovl = omap_dss_get_overlay(i); - if (ovl->manager == dssdev->manager) - ovl->info_dirty = true; - } - - r = dssdev->manager->apply(dssdev->manager); - - if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE && - mode == OMAP_DSS_UPDATE_AUTO) { - u16 w, h; - - DSSDBG("starting auto update\n"); - - dssdev->get_resolution(dssdev, &w, &h); - - dsi_set_update_region(dssdev, 0, 0, w, h); - - dsi_perf_mark_start_auto(); + /* Send BTA after the frame. We need this for the TE to work, as TE + * trigger is only sent for BTAs without preceding packet. Thus we need + * to BTA after the pixel packets so that next BTA will cause TE + * trigger. + * + * This is not needed when TE is not in use, but we do it anyway to + * make sure that the transfer has been completed. It would be more + * optimal, but more complex, to wait only just before starting next + * transfer. */ + r = dsi_vc_send_bta_sync(channel); + if (r) + DSSERR("BTA after framedone failed\n"); - wake_up(&dsi.waitqueue); - } + /* RX_FIFO_NOT_EMPTY */ + if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { + DSSERR("Received error during frame transfer:\n"); + dsi_vc_flush_receive_data(channel); } - return r; + dsi.framedone_callback(-ETIMEDOUT, dsi.framedone_data); } -static int dsi_set_te(struct omap_dss_device *dssdev, bool enable) +static void dsi_framedone_irq_callback(void *data, u32 mask) { - int r = 0; + /* Note: We get FRAMEDONE when DISPC has finished sending pixels and + * turns itself off. However, DSI still has the pixels in its buffers, + * and is sending the data. + */ - if (dssdev->driver->enable_te) { - r = dssdev->driver->enable_te(dssdev, enable); - /* XXX for some reason, DSI TE breaks if we don't wait here. - * Panel bug? Needs more studying */ - msleep(100); - } + /* SIDLEMODE back to smart-idle */ + dispc_enable_sidle(); - return r; + schedule_work(&dsi.framedone_work); } static void dsi_handle_framedone(void) { int r; - const int channel = 0; - bool use_te_trigger; - - use_te_trigger = dsi.te_enabled && !dsi.use_ext_te; + const int channel = dsi.update_channel; - if (dsi.update_mode != OMAP_DSS_UPDATE_AUTO) - DSSDBG("FRAMEDONE\n"); + DSSDBG("FRAMEDONE\n"); - if (use_te_trigger) { + if (dsi.te_enabled) { /* enable LP_RX_TO again after the TE */ REG_FLD_MOD(DSI_TIMING2, 1, 15, 15); /* LP_RX_TO */ } @@ -2976,7 +2912,7 @@ static void dsi_handle_framedone(void) /* RX_FIFO_NOT_EMPTY */ if (REG_GET(DSI_VC_CTRL(channel), 20, 20)) { DSSERR("Received error during frame transfer:\n"); - dsi_vc_flush_receive_data(0); + dsi_vc_flush_receive_data(channel); } #ifdef CONFIG_OMAP2_DSS_FAKE_VSYNC @@ -2984,118 +2920,79 @@ static void dsi_handle_framedone(void) #endif } -static int dsi_update_thread(void *data) +static void dsi_framedone_work_callback(struct work_struct *work) { - unsigned long timeout; - struct omap_dss_device *device; - u16 x, y, w, h; - - while (1) { - bool sched; - - wait_event_interruptible(dsi.waitqueue, - dsi.update_mode == OMAP_DSS_UPDATE_AUTO || - (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && - dsi.update_region.dirty == true) || - kthread_should_stop()); - - if (kthread_should_stop()) - break; - - dsi_bus_lock(); - - if (dsi.update_mode == OMAP_DSS_UPDATE_DISABLED || - kthread_should_stop()) { - dsi_bus_unlock(); - break; - } - - dsi_perf_mark_setup(); - - if (dsi.update_region.dirty) { - spin_lock(&dsi.update_lock); - dsi.active_update_region = dsi.update_region; - dsi.update_region.dirty = false; - spin_unlock(&dsi.update_lock); - } + DSSDBGF(); - device = dsi.active_update_region.device; - x = dsi.active_update_region.x; - y = dsi.active_update_region.y; - w = dsi.active_update_region.w; - h = dsi.active_update_region.h; + cancel_delayed_work_sync(&dsi.framedone_timeout_work); - if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + dsi_handle_framedone(); - if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL) - dss_setup_partial_planes(device, - &x, &y, &w, &h); + dsi_perf_show("DISPC"); - dispc_set_lcd_size(w, h); - } + dsi.framedone_callback(0, dsi.framedone_data); +} - if (dsi.active_update_region.dirty) { - dsi.active_update_region.dirty = false; - /* XXX TODO we don't need to send the coords, if they - * are the same that are already programmed to the - * panel. That should speed up manual update a bit */ - device->driver->setup_update(device, x, y, w, h); - } +int omap_dsi_prepare_update(struct omap_dss_device *dssdev, + u16 *x, u16 *y, u16 *w, u16 *h) +{ + u16 dw, dh; - dsi_perf_mark_start(); + dssdev->driver->get_resolution(dssdev, &dw, &dh); - if (device->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { - dsi_vc_config_vp(0); + if (*x > dw || *y > dh) + return -EINVAL; - if (dsi.te_enabled && dsi.use_ext_te) - device->driver->wait_for_te(device); + if (*x + *w > dw) + return -EINVAL; - dsi.framedone_received = false; + if (*y + *h > dh) + return -EINVAL; - dsi_update_screen_dispc(device, x, y, w, h); + if (*w == 1) + return -EINVAL; - /* wait for framedone */ - timeout = msecs_to_jiffies(1000); - wait_event_timeout(dsi.waitqueue, - dsi.framedone_received == true, - timeout); + if (*w == 0 || *h == 0) + return -EINVAL; - if (!dsi.framedone_received) { - DSSERR("framedone timeout\n"); - DSSERR("failed update %d,%d %dx%d\n", - x, y, w, h); + dsi_perf_mark_setup(); - dispc_enable_sidle(); - dispc_enable_lcd_out(0); + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + dss_setup_partial_planes(dssdev, x, y, w, h); + dispc_set_lcd_size(*w, *h); + } - dsi_reset_tx_fifo(0); - } else { - dsi_handle_framedone(); - dsi_perf_show("DISPC"); - } - } else { - dsi_update_screen_l4(device, x, y, w, h); - dsi_perf_show("L4"); - } + return 0; +} +EXPORT_SYMBOL(omap_dsi_prepare_update); - sched = atomic_read(&dsi.bus_lock.count) < 0; +int omap_dsi_update(struct omap_dss_device *dssdev, + int channel, + u16 x, u16 y, u16 w, u16 h, + void (*callback)(int, void *), void *data) +{ + dsi.update_channel = channel; - complete_all(&dsi.update_completion); + if (dssdev->manager->caps & OMAP_DSS_OVL_MGR_CAP_DISPC) { + dsi.framedone_callback = callback; + dsi.framedone_data = data; - dsi_bus_unlock(); + dsi.update_region.x = x; + dsi.update_region.y = y; + dsi.update_region.w = w; + dsi.update_region.h = h; + dsi.update_region.device = dssdev; - /* XXX We need to give others chance to get the bus lock. Is - * there a better way for this? */ - if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO && sched) - schedule_timeout_interruptible(1); + dsi_update_screen_dispc(dssdev, x, y, w, h); + } else { + dsi_update_screen_l4(dssdev, x, y, w, h); + dsi_perf_show("L4"); + callback(0, data); } - DSSDBG("update thread exiting\n"); - return 0; } - - +EXPORT_SYMBOL(omap_dsi_update); /* Display funcs */ @@ -3203,7 +3100,8 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev) if (r) goto err1; - dss_select_clk_source(true, true); + dss_select_dispc_clk_source(DSS_SRC_DSI1_PLL_FCLK); + dss_select_dsi_clk_source(DSS_SRC_DSI2_PLL_FCLK); DSSDBG("PLL OK\n"); @@ -3229,25 +3127,18 @@ static int dsi_display_init_dsi(struct omap_dss_device *dssdev) /* enable interface */ dsi_vc_enable(0, 1); + dsi_vc_enable(1, 1); + dsi_vc_enable(2, 1); + dsi_vc_enable(3, 1); dsi_if_enable(1); dsi_force_tx_stop_mode_io(); - if (dssdev->driver->enable) { - r = dssdev->driver->enable(dssdev); - if (r) - goto err4; - } - - /* enable high-speed after initial config */ - dsi_vc_enable_hs(0, 1); - return 0; -err4: - dsi_if_enable(0); err3: dsi_complexio_uninit(); err2: - dss_select_clk_source(false, false); + dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); + dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); err1: dsi_pll_uninit(); err0: @@ -3256,10 +3147,8 @@ err0: static void dsi_display_uninit_dsi(struct omap_dss_device *dssdev) { - if (dssdev->driver->disable) - dssdev->driver->disable(dssdev); - - dss_select_clk_source(false, false); + dss_select_dispc_clk_source(DSS_SRC_DSS1_ALWON_FCLK); + dss_select_dsi_clk_source(DSS_SRC_DSS1_ALWON_FCLK); dsi_complexio_uninit(); dsi_pll_uninit(); } @@ -3280,14 +3169,15 @@ static int dsi_core_init(void) return 0; } -static int dsi_display_enable(struct omap_dss_device *dssdev) +int omapdss_dsi_display_enable(struct omap_dss_device *dssdev) { int r = 0; DSSDBG("dsi_display_enable\n"); + WARN_ON(!dsi_bus_is_locked()); + mutex_lock(&dsi.lock); - dsi_bus_lock(); r = omap_dss_start_device(dssdev); if (r) { @@ -3295,100 +3185,47 @@ static int dsi_display_enable(struct omap_dss_device *dssdev) goto err0; } - if (dssdev->state != OMAP_DSS_DISPLAY_DISABLED) { - DSSERR("dssdev already enabled\n"); - r = -EINVAL; - goto err1; - } - enable_clocks(1); dsi_enable_pll_clock(1); r = _dsi_reset(); if (r) - goto err2; + goto err1; dsi_core_init(); r = dsi_display_init_dispc(dssdev); if (r) - goto err2; + goto err1; r = dsi_display_init_dsi(dssdev); if (r) - goto err3; - - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; - - dsi.use_ext_te = dssdev->phy.dsi.ext_te; - r = dsi_set_te(dssdev, dsi.te_enabled); - if (r) - goto err4; - - dsi_set_update_mode(dssdev, dsi.user_update_mode); + goto err2; - dsi_bus_unlock(); mutex_unlock(&dsi.lock); return 0; -err4: - - dsi_display_uninit_dsi(dssdev); -err3: - dsi_display_uninit_dispc(dssdev); err2: + dsi_display_uninit_dispc(dssdev); +err1: enable_clocks(0); dsi_enable_pll_clock(0); -err1: omap_dss_stop_device(dssdev); err0: - dsi_bus_unlock(); mutex_unlock(&dsi.lock); DSSDBG("dsi_display_enable FAILED\n"); return r; } +EXPORT_SYMBOL(omapdss_dsi_display_enable); -static void dsi_display_disable(struct omap_dss_device *dssdev) +void omapdss_dsi_display_disable(struct omap_dss_device *dssdev) { DSSDBG("dsi_display_disable\n"); - mutex_lock(&dsi.lock); - dsi_bus_lock(); - - if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || - dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) - goto end; - - dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; - dssdev->state = OMAP_DSS_DISPLAY_DISABLED; - - dsi_display_uninit_dispc(dssdev); - - dsi_display_uninit_dsi(dssdev); - - enable_clocks(0); - dsi_enable_pll_clock(0); - - omap_dss_stop_device(dssdev); -end: - dsi_bus_unlock(); - mutex_unlock(&dsi.lock); -} - -static int dsi_display_suspend(struct omap_dss_device *dssdev) -{ - DSSDBG("dsi_display_suspend\n"); + WARN_ON(!dsi_bus_is_locked()); mutex_lock(&dsi.lock); - dsi_bus_lock(); - - if (dssdev->state == OMAP_DSS_DISPLAY_DISABLED || - dssdev->state == OMAP_DSS_DISPLAY_SUSPENDED) - goto end; - - dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; - dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED; dsi_display_uninit_dispc(dssdev); @@ -3396,312 +3233,19 @@ static int dsi_display_suspend(struct omap_dss_device *dssdev) enable_clocks(0); dsi_enable_pll_clock(0); -end: - dsi_bus_unlock(); - mutex_unlock(&dsi.lock); - - return 0; -} - -static int dsi_display_resume(struct omap_dss_device *dssdev) -{ - int r; - - DSSDBG("dsi_display_resume\n"); - - mutex_lock(&dsi.lock); - dsi_bus_lock(); - - if (dssdev->state != OMAP_DSS_DISPLAY_SUSPENDED) { - DSSERR("dssdev not suspended\n"); - r = -EINVAL; - goto err0; - } - - enable_clocks(1); - dsi_enable_pll_clock(1); - - r = _dsi_reset(); - if (r) - goto err1; - - dsi_core_init(); - - r = dsi_display_init_dispc(dssdev); - if (r) - goto err1; - - r = dsi_display_init_dsi(dssdev); - if (r) - goto err2; - - dssdev->state = OMAP_DSS_DISPLAY_ACTIVE; - - r = dsi_set_te(dssdev, dsi.te_enabled); - if (r) - goto err2; - - dsi_set_update_mode(dssdev, dsi.user_update_mode); - - dsi_bus_unlock(); - mutex_unlock(&dsi.lock); - - return 0; - -err2: - dsi_display_uninit_dispc(dssdev); -err1: - enable_clocks(0); - dsi_enable_pll_clock(0); -err0: - dsi_bus_unlock(); - mutex_unlock(&dsi.lock); - DSSDBG("dsi_display_resume FAILED\n"); - return r; -} - -static int dsi_display_update(struct omap_dss_device *dssdev, - u16 x, u16 y, u16 w, u16 h) -{ - int r = 0; - u16 dw, dh; - - DSSDBG("dsi_display_update(%d,%d %dx%d)\n", x, y, w, h); - mutex_lock(&dsi.lock); - - if (dsi.update_mode != OMAP_DSS_UPDATE_MANUAL) - goto end; - - if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) - goto end; - - dssdev->get_resolution(dssdev, &dw, &dh); - - if (x > dw || y > dh) - goto end; - - if (x + w > dw) - w = dw - x; - - if (y + h > dh) - h = dh - y; - - if (w == 0 || h == 0) - goto end; - - if (w == 1) { - r = -EINVAL; - goto end; - } - - dsi_set_update_region(dssdev, x, y, w, h); - - wake_up(&dsi.waitqueue); - -end: - mutex_unlock(&dsi.lock); - - return r; -} - -static int dsi_display_sync(struct omap_dss_device *dssdev) -{ - bool wait; - - DSSDBG("dsi_display_sync()\n"); - - mutex_lock(&dsi.lock); - dsi_bus_lock(); - - if (dsi.update_mode == OMAP_DSS_UPDATE_MANUAL && - dsi.update_region.dirty) { - INIT_COMPLETION(dsi.update_completion); - wait = true; - } else { - wait = false; - } - - dsi_bus_unlock(); - mutex_unlock(&dsi.lock); - - if (wait) - wait_for_completion_interruptible(&dsi.update_completion); - - DSSDBG("dsi_display_sync() done\n"); - return 0; -} - -static int dsi_display_set_update_mode(struct omap_dss_device *dssdev, - enum omap_dss_update_mode mode) -{ - int r = 0; - - DSSDBGF("%d", mode); - - mutex_lock(&dsi.lock); - dsi_bus_lock(); - - dsi.user_update_mode = mode; - r = dsi_set_update_mode(dssdev, mode); + omap_dss_stop_device(dssdev); - dsi_bus_unlock(); mutex_unlock(&dsi.lock); - - return r; } +EXPORT_SYMBOL(omapdss_dsi_display_disable); -static enum omap_dss_update_mode dsi_display_get_update_mode( - struct omap_dss_device *dssdev) +int omapdss_dsi_enable_te(struct omap_dss_device *dssdev, bool enable) { - return dsi.update_mode; -} - - -static int dsi_display_enable_te(struct omap_dss_device *dssdev, bool enable) -{ - int r = 0; - - DSSDBGF("%d", enable); - - if (!dssdev->driver->enable_te) - return -ENOENT; - - dsi_bus_lock(); - dsi.te_enabled = enable; - - if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) - goto end; - - r = dsi_set_te(dssdev, enable); -end: - dsi_bus_unlock(); - - return r; -} - -static int dsi_display_get_te(struct omap_dss_device *dssdev) -{ - return dsi.te_enabled; -} - -static int dsi_display_set_rotate(struct omap_dss_device *dssdev, u8 rotate) -{ - - DSSDBGF("%d", rotate); - - if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) - return -EINVAL; - - dsi_bus_lock(); - dssdev->driver->set_rotate(dssdev, rotate); - if (dsi.update_mode == OMAP_DSS_UPDATE_AUTO) { - u16 w, h; - /* the display dimensions may have changed, so set a new - * update region */ - dssdev->get_resolution(dssdev, &w, &h); - dsi_set_update_region(dssdev, 0, 0, w, h); - } - dsi_bus_unlock(); - return 0; } - -static u8 dsi_display_get_rotate(struct omap_dss_device *dssdev) -{ - if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate) - return 0; - - return dssdev->driver->get_rotate(dssdev); -} - -static int dsi_display_set_mirror(struct omap_dss_device *dssdev, bool mirror) -{ - DSSDBGF("%d", mirror); - - if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) - return -EINVAL; - - dsi_bus_lock(); - dssdev->driver->set_mirror(dssdev, mirror); - dsi_bus_unlock(); - - return 0; -} - -static bool dsi_display_get_mirror(struct omap_dss_device *dssdev) -{ - if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror) - return 0; - - return dssdev->driver->get_mirror(dssdev); -} - -static int dsi_display_run_test(struct omap_dss_device *dssdev, int test_num) -{ - int r; - - if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) - return -EIO; - - DSSDBGF("%d", test_num); - - dsi_bus_lock(); - - /* run test first in low speed mode */ - dsi_vc_enable_hs(0, 0); - - if (dssdev->driver->run_test) { - r = dssdev->driver->run_test(dssdev, test_num); - if (r) - goto end; - } - - /* then in high speed */ - dsi_vc_enable_hs(0, 1); - - if (dssdev->driver->run_test) { - r = dssdev->driver->run_test(dssdev, test_num); - if (r) - goto end; - } - -end: - dsi_vc_enable_hs(0, 1); - - dsi_bus_unlock(); - - return r; -} - -static int dsi_display_memory_read(struct omap_dss_device *dssdev, - void *buf, size_t size, - u16 x, u16 y, u16 w, u16 h) -{ - int r; - - DSSDBGF(""); - - if (!dssdev->driver->memory_read) - return -EINVAL; - - if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE) - return -EIO; - - dsi_bus_lock(); - - r = dssdev->driver->memory_read(dssdev, buf, size, - x, y, w, h); - - /* Memory read usually changes the update area. This will - * force the next update to re-set the update area */ - dsi.active_update_region.dirty = true; - - dsi_bus_unlock(); - - return r; -} +EXPORT_SYMBOL(omapdss_dsi_enable_te); void dsi_get_overlay_fifo_thresholds(enum omap_plane plane, u32 fifo_size, enum omap_burst_size *burst_size, @@ -3720,26 +3264,6 @@ int dsi_init_display(struct omap_dss_device *dssdev) { DSSDBG("DSI init\n"); - dssdev->enable = dsi_display_enable; - dssdev->disable = dsi_display_disable; - dssdev->suspend = dsi_display_suspend; - dssdev->resume = dsi_display_resume; - dssdev->update = dsi_display_update; - dssdev->sync = dsi_display_sync; - dssdev->set_update_mode = dsi_display_set_update_mode; - dssdev->get_update_mode = dsi_display_get_update_mode; - dssdev->enable_te = dsi_display_enable_te; - dssdev->get_te = dsi_display_get_te; - - dssdev->get_rotate = dsi_display_get_rotate; - dssdev->set_rotate = dsi_display_set_rotate; - - dssdev->get_mirror = dsi_display_get_mirror; - dssdev->set_mirror = dsi_display_set_mirror; - - dssdev->run_test = dsi_display_run_test; - dssdev->memory_read = dsi_display_memory_read; - /* XXX these should be figured out dynamically */ dssdev->caps = OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE | OMAP_DSS_DISPLAY_CAP_TEAR_ELIM; @@ -3754,9 +3278,6 @@ int dsi_init(struct platform_device *pdev) { u32 rev; int r; - struct sched_param param = { - .sched_priority = MAX_USER_RT_PRIO-1 - }; spin_lock_init(&dsi.errors_lock); dsi.errors = 0; @@ -3767,31 +3288,19 @@ int dsi_init(struct platform_device *pdev) #endif init_completion(&dsi.bta_completion); - init_completion(&dsi.update_completion); - - dsi.thread = kthread_create(dsi_update_thread, NULL, "dsi"); - if (IS_ERR(dsi.thread)) { - DSSERR("cannot create kthread\n"); - r = PTR_ERR(dsi.thread); - goto err0; - } - sched_setscheduler(dsi.thread, SCHED_FIFO, ¶m); - - init_waitqueue_head(&dsi.waitqueue); - spin_lock_init(&dsi.update_lock); mutex_init(&dsi.lock); - mutex_init(&dsi.bus_lock); + sema_init(&dsi.bus_lock, 1); + + INIT_WORK(&dsi.framedone_work, dsi_framedone_work_callback); + INIT_DELAYED_WORK_DEFERRABLE(&dsi.framedone_timeout_work, + dsi_framedone_timeout_work_callback); #ifdef DSI_CATCH_MISSING_TE init_timer(&dsi.te_timer); dsi.te_timer.function = dsi_te_timeout; dsi.te_timer.data = 0; #endif - - dsi.update_mode = OMAP_DSS_UPDATE_DISABLED; - dsi.user_update_mode = OMAP_DSS_UPDATE_DISABLED; - dsi.base = ioremap(DSI_BASE, DSI_SZ_REGS); if (!dsi.base) { DSSERR("can't ioremap DSI\n"); @@ -3799,7 +3308,7 @@ int dsi_init(struct platform_device *pdev) goto err1; } - dsi.vdds_dsi_reg = regulator_get(&pdev->dev, "vdds_dsi"); + dsi.vdds_dsi_reg = dss_get_vdds_dsi(); if (IS_ERR(dsi.vdds_dsi_reg)) { iounmap(dsi.base); DSSERR("can't get VDDS_DSI regulator\n"); @@ -3815,23 +3324,15 @@ int dsi_init(struct platform_device *pdev) enable_clocks(0); - wake_up_process(dsi.thread); - return 0; err2: iounmap(dsi.base); err1: - kthread_stop(dsi.thread); -err0: return r; } void dsi_exit(void) { - kthread_stop(dsi.thread); - - regulator_put(dsi.vdds_dsi_reg); - iounmap(dsi.base); DSSDBG("omap_dsi_exit\n"); |