diff options
Diffstat (limited to 'drivers/video/fbdev/Kconfig')
| -rw-r--r-- | drivers/video/fbdev/Kconfig | 118 |
1 files changed, 59 insertions, 59 deletions
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig index 844ada978bb7..0f559aeaf469 100644 --- a/drivers/video/fbdev/Kconfig +++ b/drivers/video/fbdev/Kconfig @@ -13,7 +13,7 @@ menuconfig FB tristate "Support for frame buffer devices" select FB_CMDLINE select FB_NOTIFY - ---help--- + help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through @@ -48,7 +48,7 @@ menuconfig FB config FIRMWARE_EDID bool "Enable firmware EDID" depends on FB - ---help--- + help This enables access to the EDID transferred from the firmware. On the i386, this is from the Video BIOS. Enable this if DDC/I2C transfers do not work for your driver and if you are using @@ -69,14 +69,14 @@ config FB_DDC config FB_BOOT_VESA_SUPPORT bool depends on FB - ---help--- + help If true, at least one selected framebuffer driver can take advantage of VESA video modes set at an early boot stage via the vga= parameter. config FB_CFB_FILLRECT tristate depends on FB - ---help--- + help Include the cfb_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version. @@ -84,7 +84,7 @@ config FB_CFB_FILLRECT config FB_CFB_COPYAREA tristate depends on FB - ---help--- + help Include the cfb_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version. @@ -92,7 +92,7 @@ config FB_CFB_COPYAREA config FB_CFB_IMAGEBLIT tristate depends on FB - ---help--- + help Include the cfb_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version. @@ -100,7 +100,7 @@ config FB_CFB_IMAGEBLIT config FB_CFB_REV_PIXELS_IN_BYTE bool depends on FB - ---help--- + help Allow generic frame-buffer functions to work on displays with 1, 2 and 4 bits per pixel depths which has opposite order of pixels in byte order to bytes in long order. @@ -108,7 +108,7 @@ config FB_CFB_REV_PIXELS_IN_BYTE config FB_SYS_FILLRECT tristate depends on FB - ---help--- + help Include the sys_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. @@ -116,7 +116,7 @@ config FB_SYS_FILLRECT config FB_SYS_COPYAREA tristate depends on FB - ---help--- + help Include the sys_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. @@ -124,7 +124,7 @@ config FB_SYS_COPYAREA config FB_SYS_IMAGEBLIT tristate depends on FB - ---help--- + help Include the sys_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. @@ -132,14 +132,14 @@ config FB_SYS_IMAGEBLIT config FB_PROVIDE_GET_FB_UNMAPPED_AREA bool depends on FB - ---help--- + help Allow generic frame-buffer to provide get_fb_unmapped_area function. menuconfig FB_FOREIGN_ENDIAN bool "Framebuffer foreign endianness support" depends on FB - ---help--- + help This menu will let you enable support for the framebuffers with non-native endianness (e.g. Little-Endian framebuffer on a Big-Endian machine). Most probably you don't have such hardware, @@ -176,7 +176,7 @@ config FB_HECUBA config FB_SVGALIB tristate depends on FB - ---help--- + help Common utility functions useful to fbdev drivers of VGA-based cards. @@ -192,7 +192,7 @@ config FB_BACKLIGHT config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB - ---help--- + help This enables functions for handling video modes using the Generalized Timing Formula and the EDID parser. A few drivers rely on this feature such as the radeonfb, rivafb, and the i810fb. If @@ -202,7 +202,7 @@ config FB_MODE_HELPERS config FB_TILEBLITTING bool "Enable Tile Blitting Support" depends on FB - ---help--- + help This enables tile blitting. Tile blitting is a drawing technique where the screen is divided into rectangular sections (tiles), whereas the standard blitting divides the screen into pixels. Because the @@ -225,7 +225,7 @@ config FB_GRVGA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS @@ -234,7 +234,7 @@ config FB_CIRRUS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. @@ -553,7 +553,7 @@ config FB_STI select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT default y - ---help--- + help STI refers to the HP "Standard Text Interface" which is a set of BIOS routines contained in a ROM chip in HP PA-RISC based machines. Enabling this option will implement the linux framebuffer device @@ -587,7 +587,7 @@ config FB_TGA select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select BITREVERSE - ---help--- + help This is the frame buffer device driver for generic TGA and SFB+ graphic cards. These include DEC ZLXp-E1, -E2 and -E3 PCI cards, also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3 @@ -815,7 +815,7 @@ config FB_PVR2 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Say Y here if you have a PowerVR 2 card in your box. If you plan to run linux on your Dreamcast, you will have to say Y here. This driver may or may not work on other PowerVR 2 cards, but is @@ -1066,7 +1066,7 @@ config FB_INTEL config FB_INTEL_DEBUG bool "Intel driver Debug Messages" depends on FB_INTEL - ---help--- + help Say Y here if you want the Intel driver to output all sorts of debugging information to provide to the maintainer when something goes wrong. @@ -1087,7 +1087,7 @@ config FB_MATROX select FB_CFB_IMAGEBLIT select FB_TILEBLITTING select FB_MACMODES if PPC_PMAC - ---help--- + help Say Y here if you have a Matrox Millennium, Matrox Millennium II, Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video, @@ -1123,7 +1123,7 @@ config FB_MATROX_MYSTIQUE config FB_MATROX_G bool "G100/G200/G400/G450/G550 support" depends on FB_MATROX - ---help--- + help Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based video card. If you select "Advanced lowlevel driver options", you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed @@ -1154,7 +1154,7 @@ config FB_MATROX_I2C tristate "Matrox I2C support" depends on FB_MATROX select FB_DDC - ---help--- + help This drivers creates I2C buses which are needed for accessing the DDC (I2C) bus present on all Matroxes, an I2C bus which interconnects Matrox optional devices, like MGA-TVO on G200 and @@ -1170,7 +1170,7 @@ config FB_MATROX_I2C config FB_MATROX_MAVEN tristate "G400 second head support" depends on FB_MATROX_G && FB_MATROX_I2C - ---help--- + help WARNING !!! This support does not work with G450 !!! Say Y or M here if you want to use a secondary head (meaning two @@ -1321,7 +1321,7 @@ config FB_S3 select FB_SVGALIB select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE - ---help--- + help Driver for graphics boards with S3 Trio / S3 Virge chip. config FB_S3_DDC @@ -1484,7 +1484,7 @@ config FB_3DFX config FB_3DFX_ACCEL bool "3Dfx Acceleration functions" depends on FB_3DFX - ---help--- + help This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer device driver with acceleration functions. @@ -1502,7 +1502,7 @@ config FB_VOODOO1 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or Voodoo2 (cvg) based graphics card. @@ -1524,7 +1524,7 @@ config FB_VT8623 select FB_SVGALIB select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE - ---help--- + help Driver for CastleRock integrated graphics core in the VIA VT8623 [Apollo CLE266] chipset. @@ -1536,7 +1536,7 @@ config FB_TRIDENT select FB_CFB_IMAGEBLIT select FB_DDC select FB_MODE_HELPERS - ---help--- + help This is the frame buffer device driver for Trident PCI/AGP chipsets. Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D and Blade XP. @@ -1560,7 +1560,7 @@ config FB_ARK select FB_SVGALIB select VGASTATE select FONT_8x16 if FRAMEBUFFER_CONSOLE - ---help--- + help Driver for PCI graphics boards with ARK 2000PV chip and ICS 5342 RAMDAC. @@ -1738,7 +1738,7 @@ config FB_PXA168 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the built-in LCD controller in the Marvell MMP processor. @@ -1750,7 +1750,7 @@ config FB_PXA select FB_CFB_IMAGEBLIT select VIDEOMODE_HELPERS if OF select FB_MODE_HELPERS if OF - ---help--- + help Frame buffer driver for the built-in LCD controller in the Intel PXA2x0 processor. @@ -1772,7 +1772,7 @@ config FB_PXA_SMARTPANEL config FB_PXA_PARAMETERS bool "PXA LCD command line parameters" depends on FB_PXA - ---help--- + help Enable the use of kernel command line or module parameters to configure the physical properties of the LCD panel when using the PXA LCD driver. @@ -1801,14 +1801,14 @@ config FB_MBX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Framebuffer driver for the Intel 2700G (Marathon) Graphics Accelerator config FB_MBX_DEBUG bool "Enable debugging info via debugfs" depends on FB_MBX && DEBUG_FS - ---help--- + help Enable this if you want debugging information using the debug filesystem (debugfs) @@ -1822,7 +1822,7 @@ config FB_FSL_DIU select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select PPC_LIB_RHEAP - ---help--- + help Framebuffer driver for the Freescale SoC DIU config FB_W100 @@ -1831,7 +1831,7 @@ config FB_W100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. It can also drive the w3220 chip found on iPAQ hx4700. @@ -1852,7 +1852,7 @@ config FB_SH_MOBILE_LCDC select FB_SYS_FOPS select FB_DEFERRED_IO select FB_BACKLIGHT - ---help--- + help Frame buffer driver for the on-chip SH-Mobile LCD controller. config FB_TMIO @@ -1861,7 +1861,7 @@ config FB_TMIO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the Toshiba Mobile IO integrated as found on the Sharp SL-6000 series @@ -1884,7 +1884,7 @@ config FB_S3C select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the built-in FB controller in the Samsung SoC line from the S3C2443 onwards, including the S3C2416, S3C2450, and the S3C64XX series such as the S3C6400 and S3C6410. @@ -1899,7 +1899,7 @@ config FB_S3C config FB_S3C_DEBUG_REGWRITE bool "Debug register writes" depends on FB_S3C - ---help--- + help Show all register writes via pr_debug() config FB_S3C2410 @@ -1908,7 +1908,7 @@ config FB_S3C2410 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the built-in LCD controller in the Samsung S3C2410 processor. @@ -1931,7 +1931,7 @@ config FB_SM501 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for the CRT and LCD controllers in the Silicon Motion SM501. @@ -1951,7 +1951,7 @@ config FB_SMSCUFX select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO - ---help--- + help This is a kernel framebuffer driver for SMSC UFX USB devices. Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000 @@ -1967,7 +1967,7 @@ config FB_UDL select FB_SYS_IMAGEBLIT select FB_SYS_FOPS select FB_DEFERRED_IO - ---help--- + help This is a kernel framebuffer driver for DisplayLink USB devices. Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices. @@ -1979,7 +1979,7 @@ config FB_IBM_GXT4500 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Say Y here to enable support for the IBM GXT4000P/6000P and GXT4500P/6500P display adaptor based on Raster Engine RC1000, found on some IBM System P (pSeries) machines. This driver @@ -1993,14 +1993,14 @@ config FB_PS3 select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS - ---help--- + help Include support for the virtual frame buffer in the PS3 platform. config FB_PS3_DEFAULT_SIZE_M int "PS3 default frame buffer size (in MiB)" depends on FB_PS3 default 9 - ---help--- + help This is the default size (in MiB) of the virtual frame buffer in the PS3. The default value can be overridden on the kernel command line @@ -2012,7 +2012,7 @@ config FB_XILINX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Include support for the Xilinx ML300/ML403 reference design framebuffer. ML300 carries a 640*480 LCD display on the board, ML403 uses a standard DB15 VGA connector. @@ -2024,7 +2024,7 @@ config FB_GOLDFISH select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Framebuffer driver for Goldfish Virtual Platform config FB_COBALT @@ -2038,7 +2038,7 @@ config FB_SH7760 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Support for the SH7760/SH7763/SH7720/SH7721 integrated (D)STN/TFT LCD Controller. Supports display resolutions up to 1024x1024 pixel, grayscale and @@ -2056,7 +2056,7 @@ config FB_DA8XX select FB_CFB_REV_PIXELS_IN_BYTE select FB_MODE_HELPERS select VIDEOMODE_HELPERS - ---help--- + help This is the frame buffer device driver for the TI LCD controller found on DA8xx/OMAP-L1xx/AM335x SoCs. If unsure, say N. @@ -2068,7 +2068,7 @@ config FB_VIRTUAL select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS - ---help--- + help This is a `virtual' frame buffer device. It operates on a chunk of unswappable kernel memory instead of on the memory of a graphics board. This means you cannot see any output sent to this frame @@ -2119,7 +2119,7 @@ config FB_MB862XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers. choice @@ -2129,7 +2129,7 @@ choice config FB_MB862XX_PCI_GDC bool "Carmine/Coral-P(A) GDC" depends on PCI - ---help--- + help This enables framebuffer support for Fujitsu Carmine/Coral-P(A) PCI graphics controller devices. @@ -2138,7 +2138,7 @@ config FB_MB862XX_LIME depends on OF && PPC select FB_FOREIGN_ENDIAN select FB_LITTLE_ENDIAN - ---help--- + help Framebuffer support for Fujitsu Lime GDC on host CPU bus. endchoice @@ -2159,7 +2159,7 @@ config FB_EP93XX select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT - ---help--- + help Framebuffer driver for the Cirrus Logic EP93XX series of processors. This driver is also available as a module. The module will be called ep93xx-fb. @@ -2167,7 +2167,7 @@ config FB_EP93XX config FB_PRE_INIT_FB bool "Don't reinitialize, use bootloader's GDC/Display configuration" depends on FB && FB_MB862XX_LIME - ---help--- + help Select this option if display contents should be inherited as set by the bootloader. |