summaryrefslogtreecommitdiffstats
path: root/drivers/uwb/i1480/i1480u-wlp
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/uwb/i1480/i1480u-wlp')
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/Makefile8
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h284
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/lc.c421
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/netdev.c368
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/rx.c486
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/sysfs.c408
-rw-r--r--drivers/uwb/i1480/i1480u-wlp/tx.c632
7 files changed, 2607 insertions, 0 deletions
diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile
new file mode 100644
index 000000000000..fe6709b8e68b
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/Makefile
@@ -0,0 +1,8 @@
+obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o
+
+i1480u-wlp-objs := \
+ lc.o \
+ netdev.o \
+ rx.o \
+ sysfs.o \
+ tx.o
diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
new file mode 100644
index 000000000000..5f1b2951bb83
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h
@@ -0,0 +1,284 @@
+/*
+ * Intel 1480 Wireless UWB Link USB
+ * Header formats, constants, general internal interfaces
+ *
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * This is not an standard interface.
+ *
+ * FIXME: docs
+ *
+ * i1480u-wlp is pretty simple: two endpoints, one for tx, one for
+ * rx. rx is polled. Network packets (ethernet, whatever) are wrapped
+ * in i1480 TX or RX headers (for sending over the air), and these
+ * packets are wrapped in UNTD headers (for sending to the WLP UWB
+ * controller).
+ *
+ * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets
+ * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the
+ * i1480 packet is broken in chunks/packets:
+ *
+ * UNTD-1st.hdr + i1480.hdr + payload
+ * UNTD-next.hdr + payload
+ * ...
+ * UNTD-last.hdr + payload
+ *
+ * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE.
+ *
+ * All HW structures and bitmaps are little endian, so we need to play
+ * ugly tricks when defining bitfields. Hoping for the day GCC
+ * implements __attribute__((endian(1234))).
+ *
+ * FIXME: ROADMAP to the whole implementation
+ */
+
+#ifndef __i1480u_wlp_h__
+#define __i1480u_wlp_h__
+
+#include <linux/usb.h>
+#include <linux/netdevice.h>
+#include <linux/uwb.h> /* struct uwb_rc, struct uwb_notifs_handler */
+#include <linux/wlp.h>
+#include "../i1480-wlp.h"
+
+#undef i1480u_FLOW_CONTROL /* Enable flow control code */
+
+/**
+ * Basic flow control
+ */
+enum {
+ i1480u_TX_INFLIGHT_MAX = 1000,
+ i1480u_TX_INFLIGHT_THRESHOLD = 100,
+};
+
+/** Maximum size of a transaction that we can tx/rx */
+enum {
+ /* Maximum packet size computed as follows: max UNTD header (8) +
+ * i1480 RX header (8) + max Ethernet header and payload (4096) +
+ * Padding added by skb_reserve (2) to make post Ethernet payload
+ * start on 16 byte boundary*/
+ i1480u_MAX_RX_PKT_SIZE = 4114,
+ i1480u_MAX_FRG_SIZE = 512,
+ i1480u_RX_BUFS = 9,
+};
+
+
+/**
+ * UNTD packet type
+ *
+ * We need to fragment any payload whose UNTD packet is going to be
+ * bigger than i1480u_MAX_FRG_SIZE.
+ */
+enum i1480u_pkt_type {
+ i1480u_PKT_FRAG_1ST = 0x1,
+ i1480u_PKT_FRAG_NXT = 0x0,
+ i1480u_PKT_FRAG_LST = 0x2,
+ i1480u_PKT_FRAG_CMP = 0x3
+};
+enum {
+ i1480u_PKT_NONE = 0x4,
+};
+
+/** USB Network Transfer Descriptor - common */
+struct untd_hdr {
+ u8 type;
+ __le16 len;
+} __attribute__((packed));
+
+static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr)
+{
+ return hdr->type & 0x03;
+}
+
+static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr)
+{
+ return (hdr->type >> 2) & 0x01;
+}
+
+static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type)
+{
+ hdr->type = (hdr->type & ~0x03) | type;
+}
+
+static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx)
+{
+ hdr->type = (hdr->type & ~0x04) | (rx_tx << 2);
+}
+
+
+/**
+ * USB Network Transfer Descriptor - Complete Packet
+ *
+ * This is for a packet that is smaller (header + payload) than
+ * i1480u_MAX_FRG_SIZE.
+ *
+ * @hdr.total_len is the size of the payload; the payload doesn't
+ * count this header nor the padding, but includes the size of i1480
+ * header.
+ */
+struct untd_hdr_cmp {
+ struct untd_hdr hdr;
+ u8 padding;
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - First fragment
+ *
+ * @hdr.len is the size of the *whole packet* (excluding UNTD
+ * headers); @fragment_len is the size of the payload (excluding UNTD
+ * headers, but including i1480 headers).
+ */
+struct untd_hdr_1st {
+ struct untd_hdr hdr;
+ __le16 fragment_len;
+ u8 padding[3];
+} __attribute__((packed));
+
+
+/**
+ * USB Network Transfer Descriptor - Next / Last [Rest]
+ *
+ * @hdr.len is the size of the payload, not including headrs.
+ */
+struct untd_hdr_rst {
+ struct untd_hdr hdr;
+ u8 padding;
+} __attribute__((packed));
+
+
+/**
+ * Transmission context
+ *
+ * Wraps all the stuff needed to track a pending/active tx
+ * operation.
+ */
+struct i1480u_tx {
+ struct list_head list_node;
+ struct i1480u *i1480u;
+ struct urb *urb;
+
+ struct sk_buff *skb;
+ struct wlp_tx_hdr *wlp_tx_hdr;
+
+ void *buf; /* if NULL, no new buf was used */
+ size_t buf_size;
+};
+
+/**
+ * Basic flow control
+ *
+ * We maintain a basic flow control counter. "count" how many TX URBs are
+ * outstanding. Only allow "max"
+ * TX URBs to be outstanding. If this value is reached the queue will be
+ * stopped. The queue will be restarted when there are
+ * "threshold" URBs outstanding.
+ * Maintain a counter of how many time the TX queue needed to be restarted
+ * due to the "max" being exceeded and the "threshold" reached again. The
+ * timestamp "restart_ts" is to keep track from when the counter was last
+ * queried (see sysfs handling of file wlp_tx_inflight).
+ */
+struct i1480u_tx_inflight {
+ atomic_t count;
+ unsigned long max;
+ unsigned long threshold;
+ unsigned long restart_ts;
+ atomic_t restart_count;
+};
+
+/**
+ * Instance of a i1480u WLP interface
+ *
+ * Keeps references to the USB device that wraps it, as well as it's
+ * interface and associated UWB host controller. As well, it also
+ * keeps a link to the netdevice for integration into the networking
+ * stack.
+ * We maintian separate error history for the tx and rx endpoints because
+ * the implementation does not rely on locking - having one shared
+ * structure between endpoints may cause problems. Adding locking to the
+ * implementation will have higher cost than adding a separate structure.
+ */
+struct i1480u {
+ struct usb_device *usb_dev;
+ struct usb_interface *usb_iface;
+ struct net_device *net_dev;
+
+ spinlock_t lock;
+ struct net_device_stats stats;
+
+ /* RX context handling */
+ struct sk_buff *rx_skb;
+ struct uwb_dev_addr rx_srcaddr;
+ size_t rx_untd_pkt_size;
+ struct i1480u_rx_buf {
+ struct i1480u *i1480u; /* back pointer */
+ struct urb *urb;
+ struct sk_buff *data; /* i1480u_MAX_RX_PKT_SIZE each */
+ } rx_buf[i1480u_RX_BUFS]; /* N bufs */
+
+ spinlock_t tx_list_lock; /* TX context */
+ struct list_head tx_list;
+ u8 tx_stream;
+
+ struct stats lqe_stats, rssi_stats; /* radio statistics */
+
+ /* Options we can set from sysfs */
+ struct wlp_options options;
+ struct uwb_notifs_handler uwb_notifs_handler;
+ struct edc tx_errors;
+ struct edc rx_errors;
+ struct wlp wlp;
+#ifdef i1480u_FLOW_CONTROL
+ struct urb *notif_urb;
+ struct edc notif_edc; /* error density counter */
+ u8 notif_buffer[1];
+#endif
+ struct i1480u_tx_inflight tx_inflight;
+};
+
+/* Internal interfaces */
+extern void i1480u_rx_cb(struct urb *urb);
+extern int i1480u_rx_setup(struct i1480u *);
+extern void i1480u_rx_release(struct i1480u *);
+extern void i1480u_tx_release(struct i1480u *);
+extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *,
+ struct uwb_dev_addr *);
+extern void i1480u_stop_queue(struct wlp *);
+extern void i1480u_start_queue(struct wlp *);
+extern int i1480u_sysfs_setup(struct i1480u *);
+extern void i1480u_sysfs_release(struct i1480u *);
+
+/* netdev interface */
+extern int i1480u_open(struct net_device *);
+extern int i1480u_stop(struct net_device *);
+extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *);
+extern void i1480u_tx_timeout(struct net_device *);
+extern int i1480u_set_config(struct net_device *, struct ifmap *);
+extern struct net_device_stats *i1480u_get_stats(struct net_device *);
+extern int i1480u_change_mtu(struct net_device *, int);
+extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs);
+
+/* bandwidth allocation callback */
+extern void i1480u_bw_alloc_cb(struct uwb_rsv *);
+
+/* Sys FS */
+extern struct attribute_group i1480u_wlp_attr_group;
+
+#endif /* #ifndef __i1480u_wlp_h__ */
diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c
new file mode 100644
index 000000000000..737d60cd5b73
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/lc.c
@@ -0,0 +1,421 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * This implements a very simple network driver for the WLP USB
+ * device that is associated to a UWB (Ultra Wide Band) host.
+ *
+ * This is seen as an interface of a composite device. Once the UWB
+ * host has an association to another WLP capable device, the
+ * networking interface (aka WLP) can start to send packets back and
+ * forth.
+ *
+ * Limitations:
+ *
+ * - Hand cranked; can't ifup the interface until there is an association
+ *
+ * - BW allocation very simplistic [see i1480u_mas_set() and callees].
+ *
+ *
+ * ROADMAP:
+ *
+ * ENTRY POINTS (driver model):
+ *
+ * i1480u_driver_{exit,init}(): initialization of the driver.
+ *
+ * i1480u_probe(): called by the driver code when a device
+ * matching 'i1480u_id_table' is connected.
+ *
+ * This allocs a netdev instance, inits with
+ * i1480u_add(), then registers_netdev().
+ * i1480u_init()
+ * i1480u_add()
+ *
+ * i1480u_disconnect(): device has been disconnected/module
+ * is being removed.
+ * i1480u_rm()
+ */
+#include <linux/version.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+
+
+static inline
+void i1480u_init(struct i1480u *i1480u)
+{
+ /* nothing so far... doesn't it suck? */
+ spin_lock_init(&i1480u->lock);
+ INIT_LIST_HEAD(&i1480u->tx_list);
+ spin_lock_init(&i1480u->tx_list_lock);
+ wlp_options_init(&i1480u->options);
+ edc_init(&i1480u->tx_errors);
+ edc_init(&i1480u->rx_errors);
+#ifdef i1480u_FLOW_CONTROL
+ edc_init(&i1480u->notif_edc);
+#endif
+ stats_init(&i1480u->lqe_stats);
+ stats_init(&i1480u->rssi_stats);
+ wlp_init(&i1480u->wlp);
+}
+
+/**
+ * Fill WLP device information structure
+ *
+ * The structure will contain a few character arrays, each ending with a
+ * null terminated string. Each string has to fit (excluding terminating
+ * character) into a specified range obtained from the WLP substack.
+ *
+ * It is still not clear exactly how this device information should be
+ * obtained. Until we find out we use the USB device descriptor as backup, some
+ * information elements have intuitive mappings, other not.
+ */
+static
+void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info)
+{
+ struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+ struct usb_device *usb_dev = i1480u->usb_dev;
+ /* Treat device name and model name the same */
+ if (usb_dev->descriptor.iProduct) {
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev_info->name, sizeof(dev_info->name));
+ usb_string(usb_dev, usb_dev->descriptor.iProduct,
+ dev_info->model_name, sizeof(dev_info->model_name));
+ }
+ if (usb_dev->descriptor.iManufacturer)
+ usb_string(usb_dev, usb_dev->descriptor.iManufacturer,
+ dev_info->manufacturer,
+ sizeof(dev_info->manufacturer));
+ scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x",
+ __le16_to_cpu(usb_dev->descriptor.bcdDevice));
+ if (usb_dev->descriptor.iSerialNumber)
+ usb_string(usb_dev, usb_dev->descriptor.iSerialNumber,
+ dev_info->serial, sizeof(dev_info->serial));
+ /* FIXME: where should we obtain category? */
+ dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER);
+ /* FIXME: Complete OUI and OUIsubdiv attributes */
+}
+
+#ifdef i1480u_FLOW_CONTROL
+/**
+ * Callback for the notification endpoint
+ *
+ * This mostly controls the xon/xoff protocol. In case of hard error,
+ * we stop the queue. If not, we always retry.
+ */
+static
+void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs)
+{
+ struct i1480u *i1480u = urb->context;
+ struct usb_interface *usb_iface = i1480u->usb_iface;
+ struct device *dev = &usb_iface->dev;
+ int result;
+
+ switch (urb->status) {
+ case 0: /* Got valid data, do xon/xoff */
+ switch (i1480u->notif_buffer[0]) {
+ case 'N':
+ dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies);
+ netif_stop_queue(i1480u->net_dev);
+ break;
+ case 'A':
+ dev_err(dev, "XON STARTING queue at %lu\n", jiffies);
+ netif_start_queue(i1480u->net_dev);
+ break;
+ default:
+ dev_err(dev, "NEP: unknown data 0x%02hhx\n",
+ i1480u->notif_buffer[0]);
+ }
+ break;
+ case -ECONNRESET: /* Controlled situation ... */
+ case -ENOENT: /* we killed the URB... */
+ dev_err(dev, "NEP: URB reset/noent %d\n", urb->status);
+ goto error;
+ case -ESHUTDOWN: /* going away! */
+ dev_err(dev, "NEP: URB down %d\n", urb->status);
+ goto error;
+ default: /* Retry unless it gets ugly */
+ if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME)) {
+ dev_err(dev, "NEP: URB max acceptable errors "
+ "exceeded; resetting device\n");
+ goto error_reset;
+ }
+ dev_err(dev, "NEP: URB error %d\n", urb->status);
+ break;
+ }
+ result = usb_submit_urb(urb, GFP_ATOMIC);
+ if (result < 0) {
+ dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n",
+ result);
+ goto error_reset;
+ }
+ return;
+
+error_reset:
+ wlp_reset_all(&i1480-wlp);
+error:
+ netif_stop_queue(i1480u->net_dev);
+ return;
+}
+#endif
+
+static
+int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface)
+{
+ int result = -ENODEV;
+ struct wlp *wlp = &i1480u->wlp;
+ struct usb_device *usb_dev = interface_to_usbdev(iface);
+ struct net_device *net_dev = i1480u->net_dev;
+ struct uwb_rc *rc;
+ struct uwb_dev *uwb_dev;
+#ifdef i1480u_FLOW_CONTROL
+ struct usb_endpoint_descriptor *epd;
+#endif
+
+ i1480u->usb_dev = usb_get_dev(usb_dev);
+ i1480u->usb_iface = iface;
+ rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev);
+ if (rc == NULL) {
+ dev_err(&iface->dev, "Cannot get associated UWB Radio "
+ "Controller\n");
+ goto out;
+ }
+ wlp->xmit_frame = i1480u_xmit_frame;
+ wlp->fill_device_info = i1480u_fill_device_info;
+ wlp->stop_queue = i1480u_stop_queue;
+ wlp->start_queue = i1480u_start_queue;
+ result = wlp_setup(wlp, rc);
+ if (result < 0) {
+ dev_err(&iface->dev, "Cannot setup WLP\n");
+ goto error_wlp_setup;
+ }
+ result = 0;
+ ether_setup(net_dev); /* make it an etherdevice */
+ uwb_dev = &rc->uwb_dev;
+ /* FIXME: hookup address change notifications? */
+
+ memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data,
+ sizeof(net_dev->dev_addr));
+
+ net_dev->hard_header_len = sizeof(struct untd_hdr_cmp)
+ + sizeof(struct wlp_tx_hdr)
+ + WLP_DATA_HLEN
+ + ETH_HLEN;
+ net_dev->mtu = 3500;
+ net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */
+
+/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */
+ /* FIXME: multicast disabled */
+ net_dev->flags &= ~IFF_MULTICAST;
+ net_dev->features &= ~NETIF_F_SG;
+ net_dev->features &= ~NETIF_F_FRAGLIST;
+ /* All NETIF_F_*_CSUM disabled */
+ net_dev->features |= NETIF_F_HIGHDMA;
+ net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */
+
+ net_dev->open = i1480u_open;
+ net_dev->stop = i1480u_stop;
+ net_dev->hard_start_xmit = i1480u_hard_start_xmit;
+ net_dev->tx_timeout = i1480u_tx_timeout;
+ net_dev->get_stats = i1480u_get_stats;
+ net_dev->set_config = i1480u_set_config;
+ net_dev->change_mtu = i1480u_change_mtu;
+
+#ifdef i1480u_FLOW_CONTROL
+ /* Notification endpoint setup (submitted when we open the device) */
+ i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (i1480u->notif_urb == NULL) {
+ dev_err(&iface->dev, "Unable to allocate notification URB\n");
+ result = -ENOMEM;
+ goto error_urb_alloc;
+ }
+ epd = &iface->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(i1480u->notif_urb, usb_dev,
+ usb_rcvintpipe(usb_dev, epd->bEndpointAddress),
+ i1480u->notif_buffer, sizeof(i1480u->notif_buffer),
+ i1480u_notif_cb, i1480u, epd->bInterval);
+
+#endif
+
+ i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX;
+ i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+ i1480u->tx_inflight.restart_ts = jiffies;
+ usb_set_intfdata(iface, i1480u);
+ return result;
+
+#ifdef i1480u_FLOW_CONTROL
+error_urb_alloc:
+#endif
+ wlp_remove(wlp);
+error_wlp_setup:
+ uwb_rc_put(rc);
+out:
+ usb_put_dev(i1480u->usb_dev);
+ return result;
+}
+
+static void i1480u_rm(struct i1480u *i1480u)
+{
+ struct uwb_rc *rc = i1480u->wlp.rc;
+ usb_set_intfdata(i1480u->usb_iface, NULL);
+#ifdef i1480u_FLOW_CONTROL
+ usb_kill_urb(i1480u->notif_urb);
+ usb_free_urb(i1480u->notif_urb);
+#endif
+ wlp_remove(&i1480u->wlp);
+ uwb_rc_put(rc);
+ usb_put_dev(i1480u->usb_dev);
+}
+
+/** Just setup @net_dev's i1480u private data */
+static void i1480u_netdev_setup(struct net_device *net_dev)
+{
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ /* Initialize @i1480u */
+ memset(i1480u, 0, sizeof(*i1480u));
+ i1480u_init(i1480u);
+}
+
+/**
+ * Probe a i1480u interface and register it
+ *
+ * @iface: USB interface to link to
+ * @id: USB class/subclass/protocol id
+ * @returns: 0 if ok, < 0 errno code on error.
+ *
+ * Does basic housekeeping stuff and then allocs a netdev with space
+ * for the i1480u data. Initializes, registers in i1480u, registers in
+ * netdev, ready to go.
+ */
+static int i1480u_probe(struct usb_interface *iface,
+ const struct usb_device_id *id)
+{
+ int result;
+ struct net_device *net_dev;
+ struct device *dev = &iface->dev;
+ struct i1480u *i1480u;
+
+ /* Allocate instance [calls i1480u_netdev_setup() on it] */
+ result = -ENOMEM;
+ net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup);
+ if (net_dev == NULL) {
+ dev_err(dev, "no memory for network device instance\n");
+ goto error_alloc_netdev;
+ }
+ SET_NETDEV_DEV(net_dev, dev);
+ i1480u = netdev_priv(net_dev);
+ i1480u->net_dev = net_dev;
+ result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */
+ if (result < 0) {
+ dev_err(dev, "cannot add i1480u device: %d\n", result);
+ goto error_i1480u_add;
+ }
+ result = register_netdev(net_dev); /* Okey dokey, bring it up */
+ if (result < 0) {
+ dev_err(dev, "cannot register network device: %d\n", result);
+ goto error_register_netdev;
+ }
+ i1480u_sysfs_setup(i1480u);
+ if (result < 0)
+ goto error_sysfs_init;
+ return 0;
+
+error_sysfs_init:
+ unregister_netdev(net_dev);
+error_register_netdev:
+ i1480u_rm(i1480u);
+error_i1480u_add:
+ free_netdev(net_dev);
+error_alloc_netdev:
+ return result;
+}
+
+
+/**
+ * Disconect a i1480u from the system.
+ *
+ * i1480u_stop() has been called before, so al the rx and tx contexts
+ * have been taken down already. Make sure the queue is stopped,
+ * unregister netdev and i1480u, free and kill.
+ */
+static void i1480u_disconnect(struct usb_interface *iface)
+{
+ struct i1480u *i1480u;
+ struct net_device *net_dev;
+
+ i1480u = usb_get_intfdata(iface);
+ net_dev = i1480u->net_dev;
+ netif_stop_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+ usb_kill_urb(i1480u->notif_urb);
+#endif
+ i1480u_sysfs_release(i1480u);
+ unregister_netdev(net_dev);
+ i1480u_rm(i1480u);
+ free_netdev(net_dev);
+}
+
+static struct usb_device_id i1480u_id_table[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE \
+ | USB_DEVICE_ID_MATCH_DEV_INFO \
+ | USB_DEVICE_ID_MATCH_INT_INFO,
+ .idVendor = 0x8086,
+ .idProduct = 0x0c3b,
+ .bDeviceClass = 0xef,
+ .bDeviceSubClass = 0x02,
+ .bDeviceProtocol = 0x02,
+ .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0xff,
+ .bInterfaceProtocol = 0xff,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(usb, i1480u_id_table);
+
+static struct usb_driver i1480u_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = i1480u_probe,
+ .disconnect = i1480u_disconnect,
+ .id_table = i1480u_id_table,
+};
+
+static int __init i1480u_driver_init(void)
+{
+ return usb_register(&i1480u_driver);
+}
+module_init(i1480u_driver_init);
+
+
+static void __exit i1480u_driver_exit(void)
+{
+ usb_deregister(&i1480u_driver);
+}
+module_exit(i1480u_driver_exit);
+
+MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
+MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB");
+MODULE_LICENSE("GPL");
diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c
new file mode 100644
index 000000000000..8802ac43d872
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c
@@ -0,0 +1,368 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ *
+ * Implementation of the netdevice linkage (except tx and rx related stuff).
+ *
+ * ROADMAP:
+ *
+ * ENTRY POINTS (Net device):
+ *
+ * i1480u_open(): Called when we ifconfig up the interface;
+ * associates to a UWB host controller, reserves
+ * bandwidth (MAS), sets up RX USB URB and starts
+ * the queue.
+ *
+ * i1480u_stop(): Called when we ifconfig down a interface;
+ * reverses _open().
+ *
+ * i1480u_set_config():
+ */
+
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include "i1480u-wlp.h"
+
+struct i1480u_cmd_set_ip_mas {
+ struct uwb_rccb rccb;
+ struct uwb_dev_addr addr;
+ u8 stream;
+ u8 owner;
+ u8 type; /* enum uwb_drp_type */
+ u8 baMAS[32];
+} __attribute__((packed));
+
+
+static
+int i1480u_set_ip_mas(
+ struct uwb_rc *rc,
+ const struct uwb_dev_addr *dstaddr,
+ u8 stream, u8 owner, u8 type, unsigned long *mas)
+{
+
+ int result;
+ struct i1480u_cmd_set_ip_mas *cmd;
+ struct uwb_rc_evt_confirm reply;
+
+ result = -ENOMEM;
+ cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+ if (cmd == NULL)
+ goto error_kzalloc;
+ cmd->rccb.bCommandType = 0xfd;
+ cmd->rccb.wCommand = cpu_to_le16(0x000e);
+ cmd->addr = *dstaddr;
+ cmd->stream = stream;
+ cmd->owner = owner;
+ cmd->type = type;
+ if (mas == NULL)
+ memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS));
+ else
+ memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS));
+ reply.rceb.bEventType = 0xfd;
+ reply.rceb.wEvent = cpu_to_le16(0x000e);
+ result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd),
+ &reply.rceb, sizeof(reply));
+ if (result < 0)
+ goto error_cmd;
+ if (reply.bResultCode != UWB_RC_RES_FAIL) {
+ dev_err(&rc->uwb_dev.dev,
+ "SET-IP-MAS: command execution failed: %d\n",
+ reply.bResultCode);
+ result = -EIO;
+ }
+error_cmd:
+ kfree(cmd);
+error_kzalloc:
+ return result;
+}
+
+/*
+ * Inform a WLP interface of a MAS reservation
+ *
+ * @rc is assumed refcnted.
+ */
+/* FIXME: detect if remote device is WLP capable? */
+static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc,
+ u8 stream, u8 owner, u8 type, unsigned long *mas)
+{
+ int result = 0;
+ struct device *dev = &rc->uwb_dev.dev;
+
+ result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner,
+ type, mas);
+ if (result < 0) {
+ char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE];
+ uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf),
+ &rc->uwb_dev.dev_addr);
+ uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf),
+ &uwb_dev->dev_addr);
+ dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n",
+ rcaddrbuf, devaddrbuf, result);
+ }
+ return result;
+}
+
+/**
+ * Called by bandwidth allocator when change occurs in reservation.
+ *
+ * @rsv: The reservation that is being established, modified, or
+ * terminated.
+ *
+ * When a reservation is established, modified, or terminated the upper layer
+ * (WLP here) needs set/update the currently available Media Access Slots
+ * that can be use for IP traffic.
+ *
+ * Our action taken during failure depends on how the reservation is being
+ * changed:
+ * - if reservation is being established we do nothing if we cannot set the
+ * new MAS to be used
+ * - if reservation is being terminated we revert back to PCA whether the
+ * SET IP MAS command succeeds or not.
+ */
+void i1480u_bw_alloc_cb(struct uwb_rsv *rsv)
+{
+ int result = 0;
+ struct i1480u *i1480u = rsv->pal_priv;
+ struct device *dev = &i1480u->usb_iface->dev;
+ struct uwb_dev *target_dev = rsv->target.dev;
+ struct uwb_rc *rc = i1480u->wlp.rc;
+ u8 stream = rsv->stream;
+ int type = rsv->type;
+ int is_owner = rsv->owner == &rc->uwb_dev;
+ unsigned long *bmp = rsv->mas.bm;
+
+ dev_err(dev, "WLP callback called - sending set ip mas\n");
+ /*user cannot change options while setting configuration*/
+ mutex_lock(&i1480u->options.mutex);
+ switch (rsv->state) {
+ case UWB_RSV_STATE_T_ACCEPTED:
+ case UWB_RSV_STATE_O_ESTABLISHED:
+ result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
+ type, bmp);
+ if (result < 0) {
+ dev_err(dev, "MAS reservation failed: %d\n", result);
+ goto out;
+ }
+ if (is_owner) {
+ wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
+ WLP_DRP | stream);
+ wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0);
+ }
+ break;
+ case UWB_RSV_STATE_NONE:
+ /* revert back to PCA */
+ result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner,
+ type, bmp);
+ if (result < 0)
+ dev_err(dev, "MAS reservation failed: %d\n", result);
+ /* Revert to PCA even though SET IP MAS failed. */
+ wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr,
+ i1480u->options.pca_base_priority);
+ wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1);
+ break;
+ default:
+ dev_err(dev, "unexpected WLP reservation state: %s (%d).\n",
+ uwb_rsv_state_str(rsv->state), rsv->state);
+ break;
+ }
+out:
+ mutex_unlock(&i1480u->options.mutex);
+ return;
+}
+
+/**
+ *
+ * Called on 'ifconfig up'
+ */
+int i1480u_open(struct net_device *net_dev)
+{
+ int result;
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ struct wlp *wlp = &i1480u->wlp;
+ struct uwb_rc *rc;
+ struct device *dev = &i1480u->usb_iface->dev;
+
+ rc = wlp->rc;
+ result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */
+ if (result < 0)
+ goto error_rx_setup;
+ netif_wake_queue(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+ result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);;
+ if (result < 0) {
+ dev_err(dev, "Can't submit notification URB: %d\n", result);
+ goto error_notif_urb_submit;
+ }
+#endif
+ i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb;
+ i1480u->uwb_notifs_handler.data = i1480u;
+ if (uwb_bg_joined(rc))
+ netif_carrier_on(net_dev);
+ else
+ netif_carrier_off(net_dev);
+ uwb_notifs_register(rc, &i1480u->uwb_notifs_handler);
+ /* Interface is up with an address, now we can create WSS */
+ result = wlp_wss_setup(net_dev, &wlp->wss);
+ if (result < 0) {
+ dev_err(dev, "Can't create WSS: %d. \n", result);
+ goto error_notif_deregister;
+ }
+ return 0;
+error_notif_deregister:
+ uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler);
+#ifdef i1480u_FLOW_CONTROL
+error_notif_urb_submit:
+#endif
+ netif_stop_queue(net_dev);
+ i1480u_rx_release(i1480u);
+error_rx_setup:
+ return result;
+}
+
+
+/**
+ * Called on 'ifconfig down'
+ */
+int i1480u_stop(struct net_device *net_dev)
+{
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ struct wlp *wlp = &i1480u->wlp;
+ struct uwb_rc *rc = wlp->rc;
+
+ BUG_ON(wlp->rc == NULL);
+ wlp_wss_remove(&wlp->wss);
+ uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler);
+ netif_carrier_off(net_dev);
+#ifdef i1480u_FLOW_CONTROL
+ usb_kill_urb(i1480u->notif_urb);
+#endif
+ netif_stop_queue(net_dev);
+ i1480u_rx_release(i1480u);
+ i1480u_tx_release(i1480u);
+ return 0;
+}
+
+
+/** Report statistics */
+struct net_device_stats *i1480u_get_stats(struct net_device *net_dev)
+{
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ return &i1480u->stats;
+}
+
+
+/**
+ *
+ * Change the interface config--we probably don't have to do anything.
+ */
+int i1480u_set_config(struct net_device *net_dev, struct ifmap *map)
+{
+ int result;
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ BUG_ON(i1480u->wlp.rc == NULL);
+ result = 0;
+ return result;
+}
+
+/**
+ * Change the MTU of the interface
+ */
+int i1480u_change_mtu(struct net_device *net_dev, int mtu)
+{
+ static union {
+ struct wlp_tx_hdr tx;
+ struct wlp_rx_hdr rx;
+ } i1480u_all_hdrs;
+
+ if (mtu < ETH_HLEN) /* We encap eth frames */
+ return -ERANGE;
+ if (mtu > 4000 - sizeof(i1480u_all_hdrs))
+ return -ERANGE;
+ net_dev->mtu = mtu;
+ return 0;
+}
+
+
+/**
+ * Callback function to handle events from UWB
+ * When we see other devices we know the carrier is ok,
+ * if we are the only device in the beacon group we set the carrier
+ * state to off.
+ * */
+void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev,
+ enum uwb_notifs event)
+{
+ struct i1480u *i1480u = data;
+ struct net_device *net_dev = i1480u->net_dev;
+ struct device *dev = &i1480u->usb_iface->dev;
+ switch (event) {
+ case UWB_NOTIF_BG_JOIN:
+ netif_carrier_on(net_dev);
+ dev_info(dev, "Link is up\n");
+ break;
+ case UWB_NOTIF_BG_LEAVE:
+ netif_carrier_off(net_dev);
+ dev_info(dev, "Link is down\n");
+ break;
+ default:
+ dev_err(dev, "don't know how to handle event %d from uwb\n",
+ event);
+ }
+}
+
+/**
+ * Stop the network queue
+ *
+ * Enable WLP substack to stop network queue. We also set the flow control
+ * threshold at this time to prevent the flow control from restarting the
+ * queue.
+ *
+ * we are loosing the current threshold value here ... FIXME?
+ */
+void i1480u_stop_queue(struct wlp *wlp)
+{
+ struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+ struct net_device *net_dev = i1480u->net_dev;
+ i1480u->tx_inflight.threshold = 0;
+ netif_stop_queue(net_dev);
+}
+
+/**
+ * Start the network queue
+ *
+ * Enable WLP substack to start network queue. Also re-enable the flow
+ * control to manage the queue again.
+ *
+ * We re-enable the flow control by storing the default threshold in the
+ * flow control threshold. This means that if the user modified the
+ * threshold before the queue was stopped and restarted that information
+ * will be lost. FIXME?
+ */
+void i1480u_start_queue(struct wlp *wlp)
+{
+ struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+ struct net_device *net_dev = i1480u->net_dev;
+ i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD;
+ netif_start_queue(net_dev);
+}
diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c
new file mode 100644
index 000000000000..9fc035354a76
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/rx.c
@@ -0,0 +1,486 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Driver for the Linux Network stack.
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * i1480u's RX handling is simple. i1480u will send the received
+ * network packets broken up in fragments; 1 to N fragments make a
+ * packet, we assemble them together and deliver the packet with netif_rx().
+ *
+ * Beacuse each USB transfer is a *single* fragment (except when the
+ * transfer contains a first fragment), each URB called thus
+ * back contains one or two fragments. So we queue N URBs, each with its own
+ * fragment buffer. When a URB is done, we process it (adding to the
+ * current skb from the fragment buffer until complete). Once
+ * processed, we requeue the URB. There is always a bunch of URBs
+ * ready to take data, so the intergap should be minimal.
+ *
+ * An URB's transfer buffer is the data field of a socket buffer. This
+ * reduces copying as data can be passed directly to network layer. If a
+ * complete packet or 1st fragment is received the URB's transfer buffer is
+ * taken away from it and used to send data to the network layer. In this
+ * case a new transfer buffer is allocated to the URB before being requeued.
+ * If a "NEXT" or "LAST" fragment is received, the fragment contents is
+ * appended to the RX packet under construction and the transfer buffer
+ * is reused. To be able to use this buffer to assemble complete packets
+ * we set each buffer's size to that of the MAX ethernet packet that can
+ * be received. There is thus room for improvement in memory usage.
+ *
+ * When the max tx fragment size increases, we should be able to read
+ * data into the skbs directly with very simple code.
+ *
+ * ROADMAP:
+ *
+ * ENTRY POINTS:
+ *
+ * i1480u_rx_setup(): setup RX context [from i1480u_open()]
+ *
+ * i1480u_rx_release(): release RX context [from i1480u_stop()]
+ *
+ * i1480u_rx_cb(): called when the RX USB URB receives a
+ * packet. It removes the header and pushes it up
+ * the Linux netdev stack with netif_rx().
+ *
+ * i1480u_rx_buffer()
+ * i1480u_drop() and i1480u_fix()
+ * i1480u_skb_deliver
+ *
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include "i1480u-wlp.h"
+
+#define D_LOCAL 0
+#include <linux/uwb/debug.h>
+
+
+/**
+ * Setup the RX context
+ *
+ * Each URB is provided with a transfer_buffer that is the data field
+ * of a new socket buffer.
+ */
+int i1480u_rx_setup(struct i1480u *i1480u)
+{
+ int result, cnt;
+ struct device *dev = &i1480u->usb_iface->dev;
+ struct net_device *net_dev = i1480u->net_dev;
+ struct usb_endpoint_descriptor *epd;
+ struct sk_buff *skb;
+
+ /* Alloc RX stuff */
+ i1480u->rx_skb = NULL; /* not in process of receiving packet */
+ result = -ENOMEM;
+ epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc;
+ for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+ struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt];
+ rx_buf->i1480u = i1480u;
+ skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
+ if (!skb) {
+ dev_err(dev,
+ "RX: cannot allocate RX buffer %d\n", cnt);
+ result = -ENOMEM;
+ goto error;
+ }
+ skb->dev = net_dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb_reserve(skb, 2);
+ rx_buf->data = skb;
+ rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (unlikely(rx_buf->urb == NULL)) {
+ dev_err(dev, "RX: cannot allocate URB %d\n", cnt);
+ result = -ENOMEM;
+ goto error;
+ }
+ usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev,
+ usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress),
+ rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2,
+ i1480u_rx_cb, rx_buf);
+ result = usb_submit_urb(rx_buf->urb, GFP_NOIO);
+ if (unlikely(result < 0)) {
+ dev_err(dev, "RX: cannot submit URB %d: %d\n",
+ cnt, result);
+ goto error;
+ }
+ }
+ return 0;
+
+error:
+ i1480u_rx_release(i1480u);
+ return result;
+}
+
+
+/** Release resources associated to the rx context */
+void i1480u_rx_release(struct i1480u *i1480u)
+{
+ int cnt;
+ for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+ if (i1480u->rx_buf[cnt].data)
+ dev_kfree_skb(i1480u->rx_buf[cnt].data);
+ if (i1480u->rx_buf[cnt].urb) {
+ usb_kill_urb(i1480u->rx_buf[cnt].urb);
+ usb_free_urb(i1480u->rx_buf[cnt].urb);
+ }
+ }
+ if (i1480u->rx_skb != NULL)
+ dev_kfree_skb(i1480u->rx_skb);
+}
+
+static
+void i1480u_rx_unlink_urbs(struct i1480u *i1480u)
+{
+ int cnt;
+ for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) {
+ if (i1480u->rx_buf[cnt].urb)
+ usb_unlink_urb(i1480u->rx_buf[cnt].urb);
+ }
+}
+
+/** Fix an out-of-sequence packet */
+#define i1480u_fix(i1480u, msg...) \
+do { \
+ if (printk_ratelimit()) \
+ dev_err(&i1480u->usb_iface->dev, msg); \
+ dev_kfree_skb_irq(i1480u->rx_skb); \
+ i1480u->rx_skb = NULL; \
+ i1480u->rx_untd_pkt_size = 0; \
+} while (0)
+
+
+/** Drop an out-of-sequence packet */
+#define i1480u_drop(i1480u, msg...) \
+do { \
+ if (printk_ratelimit()) \
+ dev_err(&i1480u->usb_iface->dev, msg); \
+ i1480u->stats.rx_dropped++; \
+} while (0)
+
+
+
+
+/** Finalizes setting up the SKB and delivers it
+ *
+ * We first pass the incoming frame to WLP substack for verification. It
+ * may also be a WLP association frame in which case WLP will take over the
+ * processing. If WLP does not take it over it will still verify it, if the
+ * frame is invalid the skb will be freed by WLP and we will not continue
+ * parsing.
+ * */
+static
+void i1480u_skb_deliver(struct i1480u *i1480u)
+{
+ int should_parse;
+ struct net_device *net_dev = i1480u->net_dev;
+ struct device *dev = &i1480u->usb_iface->dev;
+
+ d_printf(6, dev, "RX delivered pre skb(%p), %u bytes\n",
+ i1480u->rx_skb, i1480u->rx_skb->len);
+ d_dump(7, dev, i1480u->rx_skb->data, i1480u->rx_skb->len);
+ should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb,
+ &i1480u->rx_srcaddr);
+ if (!should_parse)
+ goto out;
+ i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev);
+ d_printf(5, dev, "RX delivered skb(%p), %u bytes\n",
+ i1480u->rx_skb, i1480u->rx_skb->len);
+ d_dump(7, dev, i1480u->rx_skb->data,
+ i1480u->rx_skb->len > 72 ? 72 : i1480u->rx_skb->len);
+ i1480u->stats.rx_packets++;
+ i1480u->stats.rx_bytes += i1480u->rx_untd_pkt_size;
+ net_dev->last_rx = jiffies;
+ /* FIXME: flow control: check netif_rx() retval */
+
+ netif_rx(i1480u->rx_skb); /* deliver */
+out:
+ i1480u->rx_skb = NULL;
+ i1480u->rx_untd_pkt_size = 0;
+}
+
+
+/**
+ * Process a buffer of data received from the USB RX endpoint
+ *
+ * First fragment arrives with next or last fragment. All other fragments
+ * arrive alone.
+ *
+ * /me hates long functions.
+ */
+static
+void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf)
+{
+ unsigned pkt_completed = 0; /* !0 when we got all pkt fragments */
+ size_t untd_hdr_size, untd_frg_size;
+ size_t i1480u_hdr_size;
+ struct wlp_rx_hdr *i1480u_hdr = NULL;
+
+ struct i1480u *i1480u = rx_buf->i1480u;
+ struct sk_buff *skb = rx_buf->data;
+ int size_left = rx_buf->urb->actual_length;
+ void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */
+ struct untd_hdr *untd_hdr;
+
+ struct net_device *net_dev = i1480u->net_dev;
+ struct device *dev = &i1480u->usb_iface->dev;
+ struct sk_buff *new_skb;
+
+#if 0
+ dev_fnstart(dev,
+ "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left);
+ dev_err(dev, "RX packet, %zu bytes\n", size_left);
+ dump_bytes(dev, ptr, size_left);
+#endif
+ i1480u_hdr_size = sizeof(struct wlp_rx_hdr);
+
+ while (size_left > 0) {
+ if (pkt_completed) {
+ i1480u_drop(i1480u, "RX: fragment follows completed"
+ "packet in same buffer. Dropping\n");
+ break;
+ }
+ untd_hdr = ptr;
+ if (size_left < sizeof(*untd_hdr)) { /* Check the UNTD header */
+ i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n");
+ goto out;
+ }
+ if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) { /* Paranoia: TX set? */
+ i1480u_drop(i1480u, "RX: TX bit set! Dropping\n");
+ goto out;
+ }
+ switch (untd_hdr_type(untd_hdr)) { /* Check the UNTD header type */
+ case i1480u_PKT_FRAG_1ST: {
+ struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr;
+ dev_dbg(dev, "1st fragment\n");
+ untd_hdr_size = sizeof(struct untd_hdr_1st);
+ if (i1480u->rx_skb != NULL)
+ i1480u_fix(i1480u, "RX: 1st fragment out of "
+ "sequence! Fixing\n");
+ if (size_left < untd_hdr_size + i1480u_hdr_size) {
+ i1480u_drop(i1480u, "RX: short 1st fragment! "
+ "Dropping\n");
+ goto out;
+ }
+ i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len)
+ - i1480u_hdr_size;
+ untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len);
+ if (size_left < untd_hdr_size + untd_frg_size) {
+ i1480u_drop(i1480u,
+ "RX: short payload! Dropping\n");
+ goto out;
+ }
+ i1480u->rx_skb = skb;
+ i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size;
+ i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
+ skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size);
+ skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
+ stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
+ stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
+ rx_buf->data = NULL; /* need to create new buffer */
+ break;
+ }
+ case i1480u_PKT_FRAG_NXT: {
+ dev_dbg(dev, "nxt fragment\n");
+ untd_hdr_size = sizeof(struct untd_hdr_rst);
+ if (i1480u->rx_skb == NULL) {
+ i1480u_drop(i1480u, "RX: next fragment out of "
+ "sequence! Dropping\n");
+ goto out;
+ }
+ if (size_left < untd_hdr_size) {
+ i1480u_drop(i1480u, "RX: short NXT fragment! "
+ "Dropping\n");
+ goto out;
+ }
+ untd_frg_size = le16_to_cpu(untd_hdr->len);
+ if (size_left < untd_hdr_size + untd_frg_size) {
+ i1480u_drop(i1480u,
+ "RX: short payload! Dropping\n");
+ goto out;
+ }
+ memmove(skb_put(i1480u->rx_skb, untd_frg_size),
+ ptr + untd_hdr_size, untd_frg_size);
+ break;
+ }
+ case i1480u_PKT_FRAG_LST: {
+ dev_dbg(dev, "Lst fragment\n");
+ untd_hdr_size = sizeof(struct untd_hdr_rst);
+ if (i1480u->rx_skb == NULL) {
+ i1480u_drop(i1480u, "RX: last fragment out of "
+ "sequence! Dropping\n");
+ goto out;
+ }
+ if (size_left < untd_hdr_size) {
+ i1480u_drop(i1480u, "RX: short LST fragment! "
+ "Dropping\n");
+ goto out;
+ }
+ untd_frg_size = le16_to_cpu(untd_hdr->len);
+ if (size_left < untd_frg_size + untd_hdr_size) {
+ i1480u_drop(i1480u,
+ "RX: short payload! Dropping\n");
+ goto out;
+ }
+ memmove(skb_put(i1480u->rx_skb, untd_frg_size),
+ ptr + untd_hdr_size, untd_frg_size);
+ pkt_completed = 1;
+ break;
+ }
+ case i1480u_PKT_FRAG_CMP: {
+ dev_dbg(dev, "cmp fragment\n");
+ untd_hdr_size = sizeof(struct untd_hdr_cmp);
+ if (i1480u->rx_skb != NULL)
+ i1480u_fix(i1480u, "RX: fix out-of-sequence CMP"
+ " fragment!\n");
+ if (size_left < untd_hdr_size + i1480u_hdr_size) {
+ i1480u_drop(i1480u, "RX: short CMP fragment! "
+ "Dropping\n");
+ goto out;
+ }
+ i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len);
+ untd_frg_size = i1480u->rx_untd_pkt_size;
+ if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) {
+ i1480u_drop(i1480u,
+ "RX: short payload! Dropping\n");
+ goto out;
+ }
+ i1480u->rx_skb = skb;
+ i1480u_hdr = (void *) untd_hdr + untd_hdr_size;
+ i1480u->rx_srcaddr = i1480u_hdr->srcaddr;
+ stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7);
+ stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18);
+ skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size);
+ skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size);
+ rx_buf->data = NULL; /* for hand off skb to network stack */
+ pkt_completed = 1;
+ i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */
+ break;
+ }
+ default:
+ i1480u_drop(i1480u, "RX: unknown packet type %u! "
+ "Dropping\n", untd_hdr_type(untd_hdr));
+ goto out;
+ }
+ size_left -= untd_hdr_size + untd_frg_size;
+ if (size_left > 0)
+ ptr += untd_hdr_size + untd_frg_size;
+ }
+ if (pkt_completed)
+ i1480u_skb_deliver(i1480u);
+out:
+ /* recreate needed RX buffers*/
+ if (rx_buf->data == NULL) {
+ /* buffer is being used to receive packet, create new */
+ new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE);
+ if (!new_skb) {
+ if (printk_ratelimit())
+ dev_err(dev,
+ "RX: cannot allocate RX buffer\n");
+ } else {
+ new_skb->dev = net_dev;
+ new_skb->ip_summed = CHECKSUM_NONE;
+ skb_reserve(new_skb, 2);
+ rx_buf->data = new_skb;
+ }
+ }
+ return;
+}
+
+
+/**
+ * Called when an RX URB has finished receiving or has found some kind
+ * of error condition.
+ *
+ * LIMITATIONS:
+ *
+ * - We read USB-transfers, each transfer contains a SINGLE fragment
+ * (can contain a complete packet, or a 1st, next, or last fragment
+ * of a packet).
+ * Looks like a transfer can contain more than one fragment (07/18/06)
+ *
+ * - Each transfer buffer is the size of the maximum packet size (minus
+ * headroom), i1480u_MAX_PKT_SIZE - 2
+ *
+ * - We always read the full USB-transfer, no partials.
+ *
+ * - Each transfer is read directly into a skb. This skb will be used to
+ * send data to the upper layers if it is the first fragment or a complete
+ * packet. In the other cases the data will be copied from the skb to
+ * another skb that is being prepared for the upper layers from a prev
+ * first fragment.
+ *
+ * It is simply too much of a pain. Gosh, there should be a unified
+ * SG infrastructure for *everything* [so that I could declare a SG
+ * buffer, pass it to USB for receiving, append some space to it if
+ * I wish, receive more until I have the whole chunk, adapt
+ * pointers on each fragment to remove hardware headers and then
+ * attach that to an skbuff and netif_rx()].
+ */
+void i1480u_rx_cb(struct urb *urb)
+{
+ int result;
+ int do_parse_buffer = 1;
+ struct i1480u_rx_buf *rx_buf = urb->context;
+ struct i1480u *i1480u = rx_buf->i1480u;
+ struct device *dev = &i1480u->usb_iface->dev;
+ unsigned long flags;
+ u8 rx_buf_idx = rx_buf - i1480u->rx_buf;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ECONNRESET: /* Not an error, but a controlled situation; */
+ case -ENOENT: /* (we killed the URB)...so, no broadcast */
+ case -ESHUTDOWN: /* going away! */
+ dev_err(dev, "RX URB[%u]: goind down %d\n",
+ rx_buf_idx, urb->status);
+ goto error;
+ default:
+ dev_err(dev, "RX URB[%u]: unknown status %d\n",
+ rx_buf_idx, urb->status);
+ if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME)) {
+ dev_err(dev, "RX: max acceptable errors exceeded,"
+ " resetting device.\n");
+ i1480u_rx_unlink_urbs(i1480u);
+ wlp_reset_all(&i1480u->wlp);
+ goto error;
+ }
+ do_parse_buffer = 0;
+ break;
+ }
+ spin_lock_irqsave(&i1480u->lock, flags);
+ /* chew the data fragments, extract network packets */
+ if (do_parse_buffer) {
+ i1480u_rx_buffer(rx_buf);
+ if (rx_buf->data) {
+ rx_buf->urb->transfer_buffer = rx_buf->data->data;
+ result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC);
+ if (result < 0) {
+ dev_err(dev, "RX URB[%u]: cannot submit %d\n",
+ rx_buf_idx, result);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&i1480u->lock, flags);
+error:
+ return;
+}
+
diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c
new file mode 100644
index 000000000000..a1d8ca6ac935
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/sysfs.c
@@ -0,0 +1,408 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Sysfs interfaces
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * FIXME: docs
+ */
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/uwb/debug.h>
+#include <linux/device.h>
+#include "i1480u-wlp.h"
+
+
+/**
+ *
+ * @dev: Class device from the net_device; assumed refcnted.
+ *
+ * Yes, I don't lock--we assume it is refcounted and I am getting a
+ * single byte value that is kind of atomic to read.
+ */
+ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf)
+{
+ return sprintf(buf, "%u\n",
+ wlp_tx_hdr_phy_rate(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_phy_rate_show);
+
+
+ssize_t uwb_phy_rate_store(struct wlp_options *options,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ unsigned rate;
+
+ result = sscanf(buf, "%u\n", &rate);
+ if (result != 1) {
+ result = -EINVAL;
+ goto out;
+ }
+ result = -EINVAL;
+ if (rate >= UWB_PHY_RATE_INVALID)
+ goto out;
+ wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate);
+ result = 0;
+out:
+ return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_phy_rate_store);
+
+
+ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf)
+{
+ return sprintf(buf, "%u\n",
+ wlp_tx_hdr_rts_cts(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_rts_cts_show);
+
+
+ssize_t uwb_rts_cts_store(struct wlp_options *options,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ unsigned value;
+
+ result = sscanf(buf, "%u\n", &value);
+ if (result != 1) {
+ result = -EINVAL;
+ goto out;
+ }
+ result = -EINVAL;
+ wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value);
+ result = 0;
+out:
+ return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_rts_cts_store);
+
+
+ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf)
+{
+ return sprintf(buf, "%u\n",
+ wlp_tx_hdr_ack_policy(&options->def_tx_hdr));
+}
+EXPORT_SYMBOL_GPL(uwb_ack_policy_show);
+
+
+ssize_t uwb_ack_policy_store(struct wlp_options *options,
+ const char *buf, size_t size)
+{
+ ssize_t result;
+ unsigned value;
+
+ result = sscanf(buf, "%u\n", &value);
+ if (result != 1 || value > UWB_ACK_B_REQ) {
+ result = -EINVAL;
+ goto out;
+ }
+ wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value);
+ result = 0;
+out:
+ return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_ack_policy_store);
+
+
+/**
+ * Show the PCA base priority.
+ *
+ * We can access without locking, as the value is (for now) orthogonal
+ * to other values.
+ */
+ssize_t uwb_pca_base_priority_show(const struct wlp_options *options,
+ char *buf)
+{
+ return sprintf(buf, "%u\n",
+ options->pca_base_priority);
+}
+EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show);
+
+
+/**
+ * Set the PCA base priority.
+ *
+ * We can access without locking, as the value is (for now) orthogonal
+ * to other values.
+ */
+ssize_t uwb_pca_base_priority_store(struct wlp_options *options,
+ const char *buf, size_t size)
+{
+ ssize_t result = -EINVAL;
+ u8 pca_base_priority;
+
+ result = sscanf(buf, "%hhu\n", &pca_base_priority);
+ if (result != 1) {
+ result = -EINVAL;
+ goto out;
+ }
+ result = -EINVAL;
+ if (pca_base_priority >= 8)
+ goto out;
+ options->pca_base_priority = pca_base_priority;
+ /* Update TX header if we are currently using PCA. */
+ if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0)
+ wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority);
+ result = 0;
+out:
+ return result < 0 ? result : size;
+}
+EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store);
+
+/**
+ * Show current inflight values
+ *
+ * Will print the current MAX and THRESHOLD values for the basic flow
+ * control. In addition it will report how many times the TX queue needed
+ * to be restarted since the last time this query was made.
+ */
+static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight,
+ char *buf)
+{
+ ssize_t result;
+ unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ;
+ unsigned long restart_count = atomic_read(&inflight->restart_count);
+
+ result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n"
+ "#read: threshold max inflight_count restarts "
+ "seconds restarts/sec\n"
+ "#write: threshold max\n",
+ inflight->threshold, inflight->max,
+ atomic_read(&inflight->count),
+ restart_count, sec_elapsed,
+ sec_elapsed == 0 ? 0 : restart_count/sec_elapsed);
+ inflight->restart_ts = jiffies;
+ atomic_set(&inflight->restart_count, 0);
+ return result;
+}
+
+static
+ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight,
+ const char *buf, size_t size)
+{
+ unsigned long in_threshold, in_max;
+ ssize_t result;
+ result = sscanf(buf, "%lu %lu", &in_threshold, &in_max);
+ if (result != 2)
+ return -EINVAL;
+ if (in_max <= in_threshold)
+ return -EINVAL;
+ inflight->max = in_max;
+ inflight->threshold = in_threshold;
+ return size;
+}
+/*
+ * Glue (or function adaptors) for accesing info on sysfs
+ *
+ * [we need this indirection because the PCI driver does almost the
+ * same]
+ *
+ * Linux 2.6.21 changed how 'struct netdevice' does attributes (from
+ * having a 'struct class_dev' to having a 'struct device'). That is
+ * quite of a pain.
+ *
+ * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE()
+ * create adaptors for extracting the 'struct i1480u' from a 'struct
+ * dev' and calling a function for doing a sysfs operation (as we have
+ * them factorized already). i1480u_ATTR creates the attribute file
+ * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a
+ * class_device_attr_NAME or device_attr_NAME (for group registration).
+ */
+#include <linux/version.h>
+
+#define i1480u_SHOW(name, fn, param) \
+static ssize_t i1480u_show_##name(struct device *dev, \
+ struct device_attribute *attr,\
+ char *buf) \
+{ \
+ struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \
+ return fn(&i1480u->param, buf); \
+}
+
+#define i1480u_STORE(name, fn, param) \
+static ssize_t i1480u_store_##name(struct device *dev, \
+ struct device_attribute *attr,\
+ const char *buf, size_t size)\
+{ \
+ struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \
+ return fn(&i1480u->param, buf, size); \
+}
+
+#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm, \
+ i1480u_show_##name,\
+ i1480u_store_##name)
+
+#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name, \
+ S_IRUGO, \
+ i1480u_show_##name, NULL)
+
+#define i1480u_ATTR_NAME(a) (dev_attr_##a)
+
+
+/*
+ * Sysfs adaptors
+ */
+i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options);
+i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options);
+i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options);
+i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options);
+i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options);
+i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options);
+i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options);
+i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options);
+i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_eda, wlp_eda_show, wlp);
+i1480u_STORE(wlp_eda, wlp_eda_store, wlp);
+i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp);
+i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp);
+i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp);
+i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp);
+i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp);
+i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp);
+i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp);
+i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp);
+i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp);
+i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp);
+i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp);
+i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp);
+i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp);
+i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp);
+i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp);
+i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp);
+i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp);
+i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp);
+i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp);
+i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp);
+i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR);
+
+i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp);
+i1480u_ATTR_SHOW(wlp_neighborhood);
+
+i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss);
+i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss);
+i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR);
+
+/*
+ * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over
+ * the last 256 received WLP frames (ECMA-368 13.3).
+ *
+ * [the -7dB that have to be substracted from the LQI to make the LQE
+ * are already taken into account].
+ */
+i1480u_SHOW(wlp_lqe, stats_show, lqe_stats);
+i1480u_STORE(wlp_lqe, stats_store, lqe_stats);
+i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR);
+
+/*
+ * Show the Receive Signal Strength Indicator averaged over all the
+ * received WLP frames (ECMA-368 13.3). Still is not clear what
+ * this value is, but is kind of a percentage of the signal strength
+ * at the antenna.
+ */
+i1480u_SHOW(wlp_rssi, stats_show, rssi_stats);
+i1480u_STORE(wlp_rssi, stats_store, rssi_stats);
+i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR);
+
+/**
+ * We maintain a basic flow control counter. "count" how many TX URBs are
+ * outstanding. Only allow "max"
+ * TX URBs to be outstanding. If this value is reached the queue will be
+ * stopped. The queue will be restarted when there are
+ * "threshold" URBs outstanding.
+ */
+i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight);
+i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight);
+i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR);
+
+static struct attribute *i1480u_attrs[] = {
+ &i1480u_ATTR_NAME(uwb_phy_rate).attr,
+ &i1480u_ATTR_NAME(uwb_rts_cts).attr,
+ &i1480u_ATTR_NAME(uwb_ack_policy).attr,
+ &i1480u_ATTR_NAME(uwb_pca_base_priority).attr,
+ &i1480u_ATTR_NAME(wlp_lqe).attr,
+ &i1480u_ATTR_NAME(wlp_rssi).attr,
+ &i1480u_ATTR_NAME(wlp_eda).attr,
+ &i1480u_ATTR_NAME(wlp_uuid).attr,
+ &i1480u_ATTR_NAME(wlp_dev_name).attr,
+ &i1480u_ATTR_NAME(wlp_dev_manufacturer).attr,
+ &i1480u_ATTR_NAME(wlp_dev_model_name).attr,
+ &i1480u_ATTR_NAME(wlp_dev_model_nr).attr,
+ &i1480u_ATTR_NAME(wlp_dev_serial).attr,
+ &i1480u_ATTR_NAME(wlp_dev_prim_category).attr,
+ &i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr,
+ &i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr,
+ &i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr,
+ &i1480u_ATTR_NAME(wlp_neighborhood).attr,
+ &i1480u_ATTR_NAME(wss_activate).attr,
+ &i1480u_ATTR_NAME(wlp_tx_inflight).attr,
+ NULL,
+};
+
+static struct attribute_group i1480u_attr_group = {
+ .name = NULL, /* we want them in the same directory */
+ .attrs = i1480u_attrs,
+};
+
+int i1480u_sysfs_setup(struct i1480u *i1480u)
+{
+ int result;
+ struct device *dev = &i1480u->usb_iface->dev;
+ result = sysfs_create_group(&i1480u->net_dev->dev.kobj,
+ &i1480u_attr_group);
+ if (result < 0)
+ dev_err(dev, "cannot initialize sysfs attributes: %d\n",
+ result);
+ return result;
+}
+
+
+void i1480u_sysfs_release(struct i1480u *i1480u)
+{
+ sysfs_remove_group(&i1480u->net_dev->dev.kobj,
+ &i1480u_attr_group);
+}
diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c
new file mode 100644
index 000000000000..3426bfb68240
--- /dev/null
+++ b/drivers/uwb/i1480/i1480u-wlp/tx.c
@@ -0,0 +1,632 @@
+/*
+ * WUSB Wire Adapter: WLP interface
+ * Deal with TX (massaging data to transmit, handling it)
+ *
+ * Copyright (C) 2005-2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Transmission engine. Get an skb, create from that a WLP transmit
+ * context, add a WLP TX header (which we keep prefilled in the
+ * device's instance), fill out the target-specific fields and
+ * fire it.
+ *
+ * ROADMAP:
+ *
+ * Entry points:
+ *
+ * i1480u_tx_release(): called by i1480u_disconnect() to release
+ * pending tx contexts.
+ *
+ * i1480u_tx_cb(): callback for TX contexts (USB URBs)
+ * i1480u_tx_destroy():
+ *
+ * i1480u_tx_timeout(): called for timeout handling from the
+ * network stack.
+ *
+ * i1480u_hard_start_xmit(): called for transmitting an skb from
+ * the network stack. Will interact with WLP
+ * substack to verify and prepare frame.
+ * i1480u_xmit_frame(): actual transmission on hardware
+ *
+ * i1480u_tx_create() Creates TX context
+ * i1480u_tx_create_1() For packets in 1 fragment
+ * i1480u_tx_create_n() For packets in >1 fragments
+ *
+ * TODO:
+ *
+ * - FIXME: rewrite using usb_sg_*(), add asynch support to
+ * usb_sg_*(). It might not make too much sense as most of
+ * the times the MTU will be smaller than one page...
+ */
+
+#include "i1480u-wlp.h"
+#define D_LOCAL 5
+#include <linux/uwb/debug.h>
+
+enum {
+ /* This is only for Next and Last TX packets */
+ i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE
+ - sizeof(struct untd_hdr_rst),
+};
+
+/** Free resources allocated to a i1480u tx context. */
+static
+void i1480u_tx_free(struct i1480u_tx *wtx)
+{
+ kfree(wtx->buf);
+ if (wtx->skb)
+ dev_kfree_skb_irq(wtx->skb);
+ usb_free_urb(wtx->urb);
+ kfree(wtx);
+}
+
+static
+void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&i1480u->tx_list_lock, flags); /* not active any more */
+ list_del(&wtx->list_node);
+ i1480u_tx_free(wtx);
+ spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+}
+
+static
+void i1480u_tx_unlink_urbs(struct i1480u *i1480u)
+{
+ unsigned long flags;
+ struct i1480u_tx *wtx, *next;
+
+ spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+ list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
+ usb_unlink_urb(wtx->urb);
+ }
+ spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+}
+
+
+/**
+ * Callback for a completed tx USB URB.
+ *
+ * TODO:
+ *
+ * - FIXME: recover errors more gracefully
+ * - FIXME: handle NAKs (I dont think they come here) for flow ctl
+ */
+static
+void i1480u_tx_cb(struct urb *urb)
+{
+ struct i1480u_tx *wtx = urb->context;
+ struct i1480u *i1480u = wtx->i1480u;
+ struct net_device *net_dev = i1480u->net_dev;
+ struct device *dev = &i1480u->usb_iface->dev;
+ unsigned long flags;
+
+ switch (urb->status) {
+ case 0:
+ spin_lock_irqsave(&i1480u->lock, flags);
+ i1480u->stats.tx_packets++;
+ i1480u->stats.tx_bytes += urb->actual_length;
+ spin_unlock_irqrestore(&i1480u->lock, flags);
+ break;
+ case -ECONNRESET: /* Not an error, but a controlled situation; */
+ case -ENOENT: /* (we killed the URB)...so, no broadcast */
+ dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status);
+ netif_stop_queue(net_dev);
+ break;
+ case -ESHUTDOWN: /* going away! */
+ dev_dbg(dev, "notif endp: down %d\n", urb->status);
+ netif_stop_queue(net_dev);
+ break;
+ default:
+ dev_err(dev, "TX: unknown URB status %d\n", urb->status);
+ if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS,
+ EDC_ERROR_TIMEFRAME)) {
+ dev_err(dev, "TX: max acceptable errors exceeded."
+ "Reset device.\n");
+ netif_stop_queue(net_dev);
+ i1480u_tx_unlink_urbs(i1480u);
+ wlp_reset_all(&i1480u->wlp);
+ }
+ break;
+ }
+ i1480u_tx_destroy(i1480u, wtx);
+ if (atomic_dec_return(&i1480u->tx_inflight.count)
+ <= i1480u->tx_inflight.threshold
+ && netif_queue_stopped(net_dev)
+ && i1480u->tx_inflight.threshold != 0) {
+ if (d_test(2) && printk_ratelimit())
+ d_printf(2, dev, "Restart queue. \n");
+ netif_start_queue(net_dev);
+ atomic_inc(&i1480u->tx_inflight.restart_count);
+ }
+ return;
+}
+
+
+/**
+ * Given a buffer that doesn't fit in a single fragment, create an
+ * scatter/gather structure for delivery to the USB pipe.
+ *
+ * Implements functionality of i1480u_tx_create().
+ *
+ * @wtx: tx descriptor
+ * @skb: skb to send
+ * @gfp_mask: gfp allocation mask
+ * @returns: Pointer to @wtx if ok, NULL on error.
+ *
+ * Sorry, TOO LONG a function, but breaking it up is kind of hard
+ *
+ * This will break the buffer in chunks smaller than
+ * i1480u_MAX_FRG_SIZE (including the header) and add proper headers
+ * to each:
+ *
+ * 1st header \
+ * i1480 tx header | fragment 1
+ * fragment data /
+ * nxt header \ fragment 2
+ * fragment data /
+ * ..
+ * ..
+ * last header \ fragment 3
+ * last fragment data /
+ *
+ * This does not fill the i1480 TX header, it is left up to the
+ * caller to do that; you can get it from @wtx->wlp_tx_hdr.
+ *
+ * This function consumes the skb unless there is an error.
+ */
+static
+int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb,
+ gfp_t gfp_mask)
+{
+ int result;
+ void *pl;
+ size_t pl_size;
+
+ void *pl_itr, *buf_itr;
+ size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0;
+ struct untd_hdr_1st *untd_hdr_1st;
+ struct wlp_tx_hdr *wlp_tx_hdr;
+ struct untd_hdr_rst *untd_hdr_rst;
+
+ wtx->skb = NULL;
+ pl = skb->data;
+ pl_itr = pl;
+ pl_size = skb->len;
+ pl_size_left = pl_size; /* payload size */
+ /* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus
+ * the headers */
+ pl_size_1st = i1480u_MAX_FRG_SIZE
+ - sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr);
+ BUG_ON(pl_size_1st > pl_size);
+ pl_size_left -= pl_size_1st;
+ /* The rest have an smaller header (no i1480 TX header). We
+ * need to break up the payload in blocks smaller than
+ * i1480u_MAX_PL_SIZE (payload excluding header). */
+ frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE;
+ /* Allocate space for the new buffer. In this new buffer we'll
+ * place the headers followed by the data fragment, headers,
+ * data fragments, etc..
+ */
+ result = -ENOMEM;
+ wtx->buf_size = sizeof(*untd_hdr_1st)
+ + sizeof(*wlp_tx_hdr)
+ + frgs * sizeof(*untd_hdr_rst)
+ + pl_size;
+ wtx->buf = kmalloc(wtx->buf_size, gfp_mask);
+ if (wtx->buf == NULL)
+ goto error_buf_alloc;
+
+ buf_itr = wtx->buf; /* We got the space, let's fill it up */
+ /* Fill 1st fragment */
+ untd_hdr_1st = buf_itr;
+ buf_itr += sizeof(*untd_hdr_1st);
+ untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST);
+ untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0);
+ untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr));
+ untd_hdr_1st->fragment_len =
+ cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr));
+ memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding));
+ /* Set up i1480 header info */
+ wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr;
+ buf_itr += sizeof(*wlp_tx_hdr);
+ /* Copy the first fragment */
+ memcpy(buf_itr, pl_itr, pl_size_1st);
+ pl_itr += pl_size_1st;
+ buf_itr += pl_size_1st;
+
+ /* Now do each remaining fragment */
+ result = -EINVAL;
+ while (pl_size_left > 0) {
+ d_printf(5, NULL, "ITR HDR: pl_size_left %zu buf_itr %zu\n",
+ pl_size_left, buf_itr - wtx->buf);
+ if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf
+ > wtx->buf_size) {
+ printk(KERN_ERR "BUG: no space for header\n");
+ goto error_bug;
+ }
+ d_printf(5, NULL, "ITR HDR 2: pl_size_left %zu buf_itr %zu\n",
+ pl_size_left, buf_itr - wtx->buf);
+ untd_hdr_rst = buf_itr;
+ buf_itr += sizeof(*untd_hdr_rst);
+ if (pl_size_left > i1480u_MAX_PL_SIZE) {
+ frg_pl_size = i1480u_MAX_PL_SIZE;
+ untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT);
+ } else {
+ frg_pl_size = pl_size_left;
+ untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST);
+ }
+ d_printf(5, NULL,
+ "ITR PL: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n",
+ pl_size_left, buf_itr - wtx->buf, frg_pl_size);
+ untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0);
+ untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size);
+ untd_hdr_rst->padding = 0;
+ if (buf_itr + frg_pl_size - wtx->buf
+ > wtx->buf_size) {
+ printk(KERN_ERR "BUG: no space for payload\n");
+ goto error_bug;
+ }
+ memcpy(buf_itr, pl_itr, frg_pl_size);
+ buf_itr += frg_pl_size;
+ pl_itr += frg_pl_size;
+ pl_size_left -= frg_pl_size;
+ d_printf(5, NULL,
+ "ITR PL 2: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n",
+ pl_size_left, buf_itr - wtx->buf, frg_pl_size);
+ }
+ dev_kfree_skb_irq(skb);
+ return 0;
+
+error_bug:
+ printk(KERN_ERR
+ "BUG: skb %u bytes\n"
+ "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n"
+ "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n",
+ skb->len,
+ frg_pl_size, i1480u_MAX_FRG_SIZE,
+ buf_itr - wtx->buf, wtx->buf_size, pl_size_left);
+
+ kfree(wtx->buf);
+error_buf_alloc:
+ return result;
+}
+
+
+/**
+ * Given a buffer that fits in a single fragment, fill out a @wtx
+ * struct for transmitting it down the USB pipe.
+ *
+ * Uses the fact that we have space reserved in front of the skbuff
+ * for hardware headers :]
+ *
+ * This does not fill the i1480 TX header, it is left up to the
+ * caller to do that; you can get it from @wtx->wlp_tx_hdr.
+ *
+ * @pl: pointer to payload data
+ * @pl_size: size of the payuload
+ *
+ * This function does not consume the @skb.
+ */
+static
+int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb,
+ gfp_t gfp_mask)
+{
+ struct untd_hdr_cmp *untd_hdr_cmp;
+ struct wlp_tx_hdr *wlp_tx_hdr;
+
+ wtx->buf = NULL;
+ wtx->skb = skb;
+ BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr));
+ wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr));
+ wtx->wlp_tx_hdr = wlp_tx_hdr;
+ BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp));
+ untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp));
+
+ untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP);
+ untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0);
+ untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp));
+ untd_hdr_cmp->padding = 0;
+ return 0;
+}
+
+
+/**
+ * Given a skb to transmit, massage it to become palatable for the TX pipe
+ *
+ * This will break the buffer in chunks smaller than
+ * i1480u_MAX_FRG_SIZE and add proper headers to each.
+ *
+ * 1st header \
+ * i1480 tx header | fragment 1
+ * fragment data /
+ * nxt header \ fragment 2
+ * fragment data /
+ * ..
+ * ..
+ * last header \ fragment 3
+ * last fragment data /
+ *
+ * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE.
+ *
+ * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the
+ * following is composed:
+ *
+ * complete header \
+ * i1480 tx header | single fragment
+ * packet data /
+ *
+ * We were going to use s/g support, but because the interface is
+ * synch and at the end there is plenty of overhead to do it, it
+ * didn't seem that worth for data that is going to be smaller than
+ * one page.
+ */
+static
+struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u,
+ struct sk_buff *skb, gfp_t gfp_mask)
+{
+ int result;
+ struct usb_endpoint_descriptor *epd;
+ int usb_pipe;
+ unsigned long flags;
+
+ struct i1480u_tx *wtx;
+ const size_t pl_max_size =
+ i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp)
+ - sizeof(struct wlp_tx_hdr);
+
+ wtx = kmalloc(sizeof(*wtx), gfp_mask);
+ if (wtx == NULL)
+ goto error_wtx_alloc;
+ wtx->urb = usb_alloc_urb(0, gfp_mask);
+ if (wtx->urb == NULL)
+ goto error_urb_alloc;
+ epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc;
+ usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress);
+ /* Fits in a single complete packet or need to split? */
+ if (skb->len > pl_max_size) {
+ result = i1480u_tx_create_n(wtx, skb, gfp_mask);
+ if (result < 0)
+ goto error_create;
+ usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
+ wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx);
+ } else {
+ result = i1480u_tx_create_1(wtx, skb, gfp_mask);
+ if (result < 0)
+ goto error_create;
+ usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe,
+ skb->data, skb->len, i1480u_tx_cb, wtx);
+ }
+ spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+ list_add(&wtx->list_node, &i1480u->tx_list);
+ spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+ return wtx;
+
+error_create:
+ kfree(wtx->urb);
+error_urb_alloc:
+ kfree(wtx);
+error_wtx_alloc:
+ return NULL;
+}
+
+/**
+ * Actual fragmentation and transmission of frame
+ *
+ * @wlp: WLP substack data structure
+ * @skb: To be transmitted
+ * @dst: Device address of destination
+ * @returns: 0 on success, <0 on failure
+ *
+ * This function can also be called directly (not just from
+ * hard_start_xmit), so we also check here if the interface is up before
+ * taking sending anything.
+ */
+int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb,
+ struct uwb_dev_addr *dst)
+{
+ int result = -ENXIO;
+ struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp);
+ struct device *dev = &i1480u->usb_iface->dev;
+ struct net_device *net_dev = i1480u->net_dev;
+ struct i1480u_tx *wtx;
+ struct wlp_tx_hdr *wlp_tx_hdr;
+ static unsigned char dev_bcast[2] = { 0xff, 0xff };
+#if 0
+ int lockup = 50;
+#endif
+
+ d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len,
+ net_dev);
+ BUG_ON(i1480u->wlp.rc == NULL);
+ if ((net_dev->flags & IFF_UP) == 0)
+ goto out;
+ result = -EBUSY;
+ if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) {
+ if (d_test(2) && printk_ratelimit())
+ d_printf(2, dev, "Max frames in flight "
+ "stopping queue.\n");
+ netif_stop_queue(net_dev);
+ goto error_max_inflight;
+ }
+ result = -ENOMEM;
+ wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC);
+ if (unlikely(wtx == NULL)) {
+ if (printk_ratelimit())
+ dev_err(dev, "TX: no memory for WLP TX URB,"
+ "dropping packet (in flight %d)\n",
+ atomic_read(&i1480u->tx_inflight.count));
+ netif_stop_queue(net_dev);
+ goto error_wtx_alloc;
+ }
+ wtx->i1480u = i1480u;
+ /* Fill out the i1480 header; @i1480u->def_tx_hdr read without
+ * locking. We do so because they are kind of orthogonal to
+ * each other (and thus not changed in an atomic batch).
+ * The ETH header is right after the WLP TX header. */
+ wlp_tx_hdr = wtx->wlp_tx_hdr;
+ *wlp_tx_hdr = i1480u->options.def_tx_hdr;
+ wlp_tx_hdr->dstaddr = *dst;
+ if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast))
+ && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) {
+ /*Broadcast message directed to DRP host. Send as best effort
+ * on PCA. */
+ wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority);
+ }
+
+#if 0
+ dev_info(dev, "TX delivering skb -> USB, %zu bytes\n", skb->len);
+ dump_bytes(dev, skb->data, skb->len > 72 ? 72 : skb->len);
+#endif
+#if 0
+ /* simulates a device lockup after every lockup# packets */
+ if (lockup && ((i1480u->stats.tx_packets + 1) % lockup) == 0) {
+ /* Simulate a dropped transmit interrupt */
+ net_dev->trans_start = jiffies;
+ netif_stop_queue(net_dev);
+ dev_err(dev, "Simulate lockup at %ld\n", jiffies);
+ return result;
+ }
+#endif
+
+ result = usb_submit_urb(wtx->urb, GFP_ATOMIC); /* Go baby */
+ if (result < 0) {
+ dev_err(dev, "TX: cannot submit URB: %d\n", result);
+ /* We leave the freeing of skb to calling function */
+ wtx->skb = NULL;
+ goto error_tx_urb_submit;
+ }
+ atomic_inc(&i1480u->tx_inflight.count);
+ net_dev->trans_start = jiffies;
+ d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+ net_dev, result);
+ return result;
+
+error_tx_urb_submit:
+ i1480u_tx_destroy(i1480u, wtx);
+error_wtx_alloc:
+error_max_inflight:
+out:
+ d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+ net_dev, result);
+ return result;
+}
+
+
+/**
+ * Transmit an skb Called when an skbuf has to be transmitted
+ *
+ * The skb is first passed to WLP substack to ensure this is a valid
+ * frame. If valid the device address of destination will be filled and
+ * the WLP header prepended to the skb. If this step fails we fake sending
+ * the frame, if we return an error the network stack will just keep trying.
+ *
+ * Broadcast frames inside a WSS needs to be treated special as multicast is
+ * not supported. A broadcast frame is sent as unicast to each member of the
+ * WSS - this is done by the WLP substack when it finds a broadcast frame.
+ * So, we test if the WLP substack took over the skb and only transmit it
+ * if it has not (been taken over).
+ *
+ * @net_dev->xmit_lock is held
+ */
+int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev)
+{
+ int result;
+ struct i1480u *i1480u = netdev_priv(net_dev);
+ struct device *dev = &i1480u->usb_iface->dev;
+ struct uwb_dev_addr dst;
+
+ d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len,
+ net_dev);
+ BUG_ON(i1480u->wlp.rc == NULL);
+ if ((net_dev->flags & IFF_UP) == 0)
+ goto error;
+ result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst);
+ if (result < 0) {
+ dev_err(dev, "WLP verification of TX frame failed (%d). "
+ "Dropping packet.\n", result);
+ goto error;
+ } else if (result == 1) {
+ d_printf(6, dev, "WLP will transmit frame. \n");
+ /* trans_start time will be set when WLP actually transmits
+ * the frame */
+ goto out;
+ }
+ d_printf(6, dev, "Transmitting frame. \n");
+ result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst);
+ if (result < 0) {
+ dev_err(dev, "Frame TX failed (%d).\n", result);
+ goto error;
+ }
+ d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+ net_dev, result);
+ return NETDEV_TX_OK;
+error:
+ dev_kfree_skb_any(skb);
+ i1480u->stats.tx_dropped++;
+out:
+ d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len,
+ net_dev, result);
+ return NETDEV_TX_OK;
+}
+
+
+/**
+ * Called when a pkt transmission doesn't complete in a reasonable period
+ * Device reset may sleep - do it outside of interrupt context (delayed)
+ */
+void i1480u_tx_timeout(struct net_device *net_dev)
+{
+ struct i1480u *i1480u = netdev_priv(net_dev);
+
+ wlp_reset_all(&i1480u->wlp);
+}
+
+
+void i1480u_tx_release(struct i1480u *i1480u)
+{
+ unsigned long flags;
+ struct i1480u_tx *wtx, *next;
+ int count = 0, empty;
+
+ spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+ list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) {
+ count++;
+ usb_unlink_urb(wtx->urb);
+ }
+ spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+ count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */
+ /*
+ * We don't like this sollution too much (dirty as it is), but
+ * it is cheaper than putting a refcount on each i1480u_tx and
+ * i1480uting for all of them to go away...
+ *
+ * Called when no more packets can be added to tx_list
+ * so can i1480ut for it to be empty.
+ */
+ while (1) {
+ spin_lock_irqsave(&i1480u->tx_list_lock, flags);
+ empty = list_empty(&i1480u->tx_list);
+ spin_unlock_irqrestore(&i1480u->tx_list_lock, flags);
+ if (empty)
+ break;
+ count--;
+ BUG_ON(count == 0);
+ msleep(20);
+ }
+}