diff options
Diffstat (limited to 'drivers/uwb/i1480/dfu/usb.c')
-rw-r--r-- | drivers/uwb/i1480/dfu/usb.c | 448 |
1 files changed, 0 insertions, 448 deletions
diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c deleted file mode 100644 index 6129a8f4b5f2..000000000000 --- a/drivers/uwb/i1480/dfu/usb.c +++ /dev/null @@ -1,448 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Intel Wireless UWB Link 1480 - * USB SKU firmware upload implementation - * - * Copyright (C) 2005-2006 Intel Corporation - * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> - * - * This driver will prepare the i1480 device to behave as a real - * Wireless USB HWA adaptor by uploading the firmware. - * - * When the device is connected or driver is loaded, i1480_usb_probe() - * is called--this will allocate and initialize the device structure, - * fill in the pointers to the common functions (read, write, - * wait_init_done and cmd for HWA command execution) and once that is - * done, call the common firmware uploading routine. Then clean up and - * return -ENODEV, as we don't attach to the device. - * - * The rest are the basic ops we implement that the fw upload code - * uses to do its job. All the ops in the common code are i1480->NAME, - * the functions are i1480_usb_NAME(). - */ -#include <linux/module.h> -#include <linux/usb.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/uwb.h> -#include <linux/usb/wusb.h> -#include <linux/usb/wusb-wa.h> -#include "i1480-dfu.h" - -struct i1480_usb { - struct i1480 i1480; - struct usb_device *usb_dev; - struct usb_interface *usb_iface; - struct urb *neep_urb; /* URB for reading from EP1 */ -}; - - -static -void i1480_usb_init(struct i1480_usb *i1480_usb) -{ - i1480_init(&i1480_usb->i1480); -} - - -static -int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface) -{ - struct usb_device *usb_dev = interface_to_usbdev(iface); - int result = -ENOMEM; - - i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ - i1480_usb->usb_iface = usb_get_intf(iface); - usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */ - i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL); - if (i1480_usb->neep_urb == NULL) - goto error; - return 0; - -error: - usb_set_intfdata(iface, NULL); - usb_put_intf(iface); - usb_put_dev(usb_dev); - return result; -} - - -static -void i1480_usb_destroy(struct i1480_usb *i1480_usb) -{ - usb_kill_urb(i1480_usb->neep_urb); - usb_free_urb(i1480_usb->neep_urb); - usb_set_intfdata(i1480_usb->usb_iface, NULL); - usb_put_intf(i1480_usb->usb_iface); - usb_put_dev(i1480_usb->usb_dev); -} - - -/** - * Write a buffer to a memory address in the i1480 device - * - * @i1480: i1480 instance - * @memory_address: - * Address where to write the data buffer to. - * @buffer: Buffer to the data - * @size: Size of the buffer [has to be < 512]. - * @returns: 0 if ok, < 0 errno code on error. - * - * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, - * so we copy it to the local i1480 buffer before proceeding. In any - * case, we have a max size we can send. - */ -static -int i1480_usb_write(struct i1480 *i1480, u32 memory_address, - const void *buffer, size_t size) -{ - int result = 0; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - size_t buffer_size, itr = 0; - - BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ - while (size > 0) { - buffer_size = size < i1480->buf_size ? size : i1480->buf_size; - memcpy(i1480->cmd_buf, buffer + itr, buffer_size); - result = usb_control_msg( - i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), - 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - memory_address, (memory_address >> 16), - i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */); - if (result < 0) - break; - itr += result; - memory_address += result; - size -= result; - } - return result; -} - - -/** - * Read a block [max size 512] of the device's memory to @i1480's buffer. - * - * @i1480: i1480 instance - * @memory_address: - * Address where to read from. - * @size: Size to read. Smaller than or equal to 512. - * @returns: >= 0 number of bytes written if ok, < 0 errno code on error. - * - * NOTE: if the memory address or block is incorrect, you might get a - * stall or a different memory read. Caller has to verify the - * memory address and size passed back in the @neh structure. - */ -static -int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size) -{ - ssize_t result = 0, bytes = 0; - size_t itr, read_size = i1480->buf_size; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - - BUG_ON(size > i1480->buf_size); - BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ - BUG_ON(read_size > 512); - - if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */ - read_size = 4; - - for (itr = 0; itr < size; itr += read_size) { - size_t itr_addr = addr + itr; - size_t itr_size = min(read_size, size - itr); - result = usb_control_msg( - i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0), - 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, - itr_addr, (itr_addr >> 16), - i1480->cmd_buf + itr, itr_size, - 100 /* FIXME: arbitrary */); - if (result < 0) { - dev_err(i1480->dev, "%s: USB read error: %zd\n", - __func__, result); - goto out; - } - if (result != itr_size) { - result = -EIO; - dev_err(i1480->dev, - "%s: partial read got only %zu bytes vs %zu expected\n", - __func__, result, itr_size); - goto out; - } - bytes += result; - } - result = bytes; -out: - return result; -} - - -/** - * Callback for reads on the notification/event endpoint - * - * Just enables the completion read handler. - */ -static -void i1480_usb_neep_cb(struct urb *urb) -{ - struct i1480 *i1480 = urb->context; - struct device *dev = i1480->dev; - - switch (urb->status) { - case 0: - break; - case -ECONNRESET: /* Not an error, but a controlled situation; */ - case -ENOENT: /* (we killed the URB)...so, no broadcast */ - dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status); - break; - case -ESHUTDOWN: /* going away! */ - dev_dbg(dev, "NEEP: down %d\n", urb->status); - break; - default: - dev_err(dev, "NEEP: unknown status %d\n", urb->status); - break; - } - i1480->evt_result = urb->actual_length; - complete(&i1480->evt_complete); - return; -} - - -/** - * Wait for the MAC FW to initialize - * - * MAC FW sends a 0xfd/0101/00 notification to EP1 when done - * initializing. Get that notification into i1480->evt_buf; upper layer - * will verify it. - * - * Set i1480->evt_result with the result of getting the event or its - * size (if successful). - * - * Delivers the data directly to i1480->evt_buf - */ -static -int i1480_usb_wait_init_done(struct i1480 *i1480) -{ - int result; - struct device *dev = i1480->dev; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - struct usb_endpoint_descriptor *epd; - - init_completion(&i1480->evt_complete); - i1480->evt_result = -EINPROGRESS; - epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev, - usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), - i1480->evt_buf, i1480->buf_size, - i1480_usb_neep_cb, i1480, epd->bInterval); - result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "init done: cannot submit NEEP read: %d\n", - result); - goto error_submit; - } - /* Wait for the USB callback to get the data */ - result = wait_for_completion_interruptible_timeout( - &i1480->evt_complete, HZ); - if (result <= 0) { - result = result == 0 ? -ETIMEDOUT : result; - goto error_wait; - } - usb_kill_urb(i1480_usb->neep_urb); - return 0; - -error_wait: - usb_kill_urb(i1480_usb->neep_urb); -error_submit: - i1480->evt_result = result; - return result; -} - - -/** - * Generic function for issuing commands to the i1480 - * - * @i1480: i1480 instance - * @cmd_name: Name of the command (for error messages) - * @cmd: Pointer to command buffer - * @cmd_size: Size of the command buffer - * @reply: Buffer for the reply event - * @reply_size: Expected size back (including RCEB); the reply buffer - * is assumed to be as big as this. - * @returns: >= 0 size of the returned event data if ok, - * < 0 errno code on error. - * - * Arms the NE handle, issues the command to the device and checks the - * basics of the reply event. - */ -static -int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) -{ - int result; - struct device *dev = i1480->dev; - struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); - struct usb_endpoint_descriptor *epd; - struct uwb_rccb *cmd = i1480->cmd_buf; - u8 iface_no; - - /* Post a read on the notification & event endpoint */ - iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber; - epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; - usb_fill_int_urb( - i1480_usb->neep_urb, i1480_usb->usb_dev, - usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), - i1480->evt_buf, i1480->buf_size, - i1480_usb_neep_cb, i1480, epd->bInterval); - result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "%s: cannot submit NEEP read: %d\n", - cmd_name, result); - goto error_submit_ep1; - } - /* Now post the command on EP0 */ - result = usb_control_msg( - i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), - WA_EXEC_RC_CMD, - USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, - 0, iface_no, - cmd, cmd_size, - 100 /* FIXME: this is totally arbitrary */); - if (result < 0) { - dev_err(dev, "%s: control request failed: %d\n", - cmd_name, result); - goto error_submit_ep0; - } - return result; - -error_submit_ep0: - usb_kill_urb(i1480_usb->neep_urb); -error_submit_ep1: - return result; -} - - -/* - * Probe a i1480 device for uploading firmware. - * - * We attach only to interface #0, which is the radio control interface. - */ -static -int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(iface); - struct i1480_usb *i1480_usb; - struct i1480 *i1480; - struct device *dev = &iface->dev; - int result; - - result = -ENODEV; - if (iface->cur_altsetting->desc.bInterfaceNumber != 0) { - dev_dbg(dev, "not attaching to iface %d\n", - iface->cur_altsetting->desc.bInterfaceNumber); - goto error; - } - if (iface->num_altsetting > 1 && - le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) { - /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ - result = usb_set_interface(interface_to_usbdev(iface), 0, 1); - if (result < 0) - dev_warn(dev, - "can't set altsetting 1 on iface 0: %d\n", - result); - } - - if (iface->cur_altsetting->desc.bNumEndpoints < 1) - return -ENODEV; - - result = -ENOMEM; - i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL); - if (i1480_usb == NULL) { - dev_err(dev, "Unable to allocate instance\n"); - goto error; - } - i1480_usb_init(i1480_usb); - - i1480 = &i1480_usb->i1480; - i1480->buf_size = 512; - i1480->cmd_buf = kmalloc_array(2, i1480->buf_size, GFP_KERNEL); - if (i1480->cmd_buf == NULL) { - dev_err(dev, "Cannot allocate transfer buffers\n"); - result = -ENOMEM; - goto error_buf_alloc; - } - i1480->evt_buf = i1480->cmd_buf + i1480->buf_size; - - result = i1480_usb_create(i1480_usb, iface); - if (result < 0) { - dev_err(dev, "Cannot create instance: %d\n", result); - goto error_create; - } - - /* setup the fops and upload the firmware */ - i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; - i1480->mac_fw_name = "i1480-usb-0.0.bin"; - i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; - i1480->phy_fw_name = "i1480-phy-0.0.bin"; - i1480->dev = &iface->dev; - i1480->write = i1480_usb_write; - i1480->read = i1480_usb_read; - i1480->rc_setup = NULL; - i1480->wait_init_done = i1480_usb_wait_init_done; - i1480->cmd = i1480_usb_cmd; - - result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */ - if (result >= 0) { - usb_reset_device(i1480_usb->usb_dev); - result = -ENODEV; /* we don't want to bind to the iface */ - } - i1480_usb_destroy(i1480_usb); -error_create: - kfree(i1480->cmd_buf); -error_buf_alloc: - kfree(i1480_usb); -error: - return result; -} - -MODULE_FIRMWARE("i1480-pre-phy-0.0.bin"); -MODULE_FIRMWARE("i1480-usb-0.0.bin"); -MODULE_FIRMWARE("i1480-phy-0.0.bin"); - -#define i1480_USB_DEV(v, p) \ -{ \ - .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ - | USB_DEVICE_ID_MATCH_DEV_INFO \ - | USB_DEVICE_ID_MATCH_INT_INFO, \ - .idVendor = (v), \ - .idProduct = (p), \ - .bDeviceClass = 0xff, \ - .bDeviceSubClass = 0xff, \ - .bDeviceProtocol = 0xff, \ - .bInterfaceClass = 0xff, \ - .bInterfaceSubClass = 0xff, \ - .bInterfaceProtocol = 0xff, \ -} - - -/** USB device ID's that we handle */ -static const struct usb_device_id i1480_usb_id_table[] = { - i1480_USB_DEV(0x8086, 0xdf3b), - i1480_USB_DEV(0x15a9, 0x0005), - i1480_USB_DEV(0x07d1, 0x3802), - i1480_USB_DEV(0x050d, 0x305a), - i1480_USB_DEV(0x3495, 0x3007), - {}, -}; -MODULE_DEVICE_TABLE(usb, i1480_usb_id_table); - - -static struct usb_driver i1480_dfu_driver = { - .name = "i1480-dfu-usb", - .id_table = i1480_usb_id_table, - .probe = i1480_usb_probe, - .disconnect = NULL, -}; - -module_usb_driver(i1480_dfu_driver); - -MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); -MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB"); -MODULE_LICENSE("GPL"); |