summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/core/hub.c18
-rw-r--r--drivers/usb/host/ehci-omap.c18
-rw-r--r--drivers/usb/host/xhci-hub.c44
-rw-r--r--drivers/usb/host/xhci-ring.c11
-rw-r--r--drivers/usb/host/xhci.h6
-rw-r--r--drivers/usb/serial/metro-usb.c8
-rw-r--r--drivers/usb/serial/option.c26
8 files changed, 100 insertions, 33 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 8fd398dffced..ee469274a3fe 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -500,6 +500,8 @@ retry:
goto retry;
}
if (!desc->reslength) { /* zero length read */
+ dev_dbg(&desc->intf->dev, "%s: zero length - clearing WDM_READ\n", __func__);
+ clear_bit(WDM_READ, &desc->flags);
spin_unlock_irq(&desc->iuspin);
goto retry;
}
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 25a7422ee657..8fb484984c86 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2324,12 +2324,16 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
static int hub_port_reset(struct usb_hub *hub, int port1,
struct usb_device *udev, unsigned int delay, bool warm);
-/* Is a USB 3.0 port in the Inactive state? */
-static bool hub_port_inactive(struct usb_hub *hub, u16 portstatus)
+/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+ * Port worm reset is required to recover
+ */
+static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
{
return hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE) ==
- USB_SS_PORT_LS_SS_INACTIVE;
+ (((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_SS_INACTIVE) ||
+ ((portstatus & USB_PORT_STAT_LINK_STATE) ==
+ USB_SS_PORT_LS_COMP_MOD)) ;
}
static int hub_port_wait_reset(struct usb_hub *hub, int port1,
@@ -2365,7 +2369,7 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1,
*
* See https://bugzilla.kernel.org/show_bug.cgi?id=41752
*/
- if (hub_port_inactive(hub, portstatus)) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
int ret;
if ((portchange & USB_PORT_STAT_C_CONNECTION))
@@ -4408,9 +4412,7 @@ static void hub_events(void)
/* Warm reset a USB3 protocol port if it's in
* SS.Inactive state.
*/
- if (hub_is_superspeed(hub->hdev) &&
- (portstatus & USB_PORT_STAT_LINK_STATE)
- == USB_SS_PORT_LS_SS_INACTIVE) {
+ if (hub_port_warm_reset_required(hub, portstatus)) {
dev_dbg(hub_dev, "warm reset port %d\n", i);
hub_port_reset(hub, i, NULL,
HUB_BH_RESET_TIME, true);
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 17cfb8a1131c..c30435499a02 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -281,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
}
}
+ /* Hold PHYs in reset while initializing EHCI controller */
if (pdata->phy_reset) {
if (gpio_is_valid(pdata->reset_gpio_port[0]))
- gpio_request_one(pdata->reset_gpio_port[0],
- GPIOF_OUT_INIT_LOW, "USB1 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0);
if (gpio_is_valid(pdata->reset_gpio_port[1]))
- gpio_request_one(pdata->reset_gpio_port[1],
- GPIOF_OUT_INIT_LOW, "USB2 PHY reset");
+ gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0);
/* Hold the PHY in RESET for enough time till DIR is high */
udelay(10);
@@ -330,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
ehci_reset(omap_ehci);
+ ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (ret) {
+ dev_err(dev, "failed to add hcd with err %d\n", ret);
+ goto err_add_hcd;
+ }
if (pdata->phy_reset) {
/* Hold the PHY in RESET for enough time till
@@ -344,12 +348,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1);
}
- ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret) {
- dev_err(dev, "failed to add hcd with err %d\n", ret);
- goto err_add_hcd;
- }
-
/* root ports should always stay powered */
ehci_port_power(omap_ehci, 1);
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 2732ef660c5c..7b01094d7993 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -462,6 +462,42 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
}
}
+/* Updates Link Status for super Speed port */
+static void xhci_hub_report_link_state(u32 *status, u32 status_reg)
+{
+ u32 pls = status_reg & PORT_PLS_MASK;
+
+ /* resume state is a xHCI internal state.
+ * Do not report it to usb core.
+ */
+ if (pls == XDEV_RESUME)
+ return;
+
+ /* When the CAS bit is set then warm reset
+ * should be performed on port
+ */
+ if (status_reg & PORT_CAS) {
+ /* The CAS bit can be set while the port is
+ * in any link state.
+ * Only roothubs have CAS bit, so we
+ * pretend to be in compliance mode
+ * unless we're already in compliance
+ * or the inactive state.
+ */
+ if (pls != USB_SS_PORT_LS_COMP_MOD &&
+ pls != USB_SS_PORT_LS_SS_INACTIVE) {
+ pls = USB_SS_PORT_LS_COMP_MOD;
+ }
+ /* Return also connection bit -
+ * hub state machine resets port
+ * when this bit is set.
+ */
+ pls |= USB_PORT_STAT_CONNECTION;
+ }
+ /* update status field */
+ *status |= pls;
+}
+
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
@@ -606,13 +642,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
else
status |= USB_PORT_STAT_POWER;
}
- /* Port Link State */
+ /* Update Port Link State for super speed ports*/
if (hcd->speed == HCD_USB3) {
- /* resume state is a xHCI internal state.
- * Do not report it to usb core.
- */
- if ((temp & PORT_PLS_MASK) != XDEV_RESUME)
- status |= (temp & PORT_PLS_MASK);
+ xhci_hub_report_link_state(&status, temp);
}
if (bus_state->port_c_suspend & (1 << wIndex))
status |= 1 << USB_PORT_FEAT_C_SUSPEND;
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 23b4aefd1036..8275645889da 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
num_trbs_free_temp = ep_ring->num_trbs_free;
dequeue_temp = ep_ring->dequeue;
+ /* If we get two back-to-back stalls, and the first stalled transfer
+ * ends just before a link TRB, the dequeue pointer will be left on
+ * the link TRB by the code in the while loop. So we have to update
+ * the dequeue pointer one segment further, or we'll jump off
+ * the segment into la-la-land.
+ */
+ if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) {
+ ep_ring->deq_seg = ep_ring->deq_seg->next;
+ ep_ring->dequeue = ep_ring->deq_seg->trbs;
+ }
+
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
/* We have more usable TRBs */
ep_ring->num_trbs_free++;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index de3d6e3e57be..55c0785810c9 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -341,7 +341,11 @@ struct xhci_op_regs {
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
-/* bit 24 reserved */
+/* Cold Attach Status - xHC can set this bit to report device attached during
+ * Sx state. Warm port reset should be perfomed to clear this bit and move port
+ * to connected state.
+ */
+#define PORT_CAS (1 << 24)
/* wake on connect (enable) */
#define PORT_WKCONN_E (1 << 25)
/* wake on disconnect (enable) */
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 81423f7361db..d47eb06fe463 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -222,14 +222,6 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
metro_priv->throttled = 0;
spin_unlock_irqrestore(&metro_priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Clear the urb pipe. */
usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index adf8ce72be50..417ab1b0aa30 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -497,6 +497,15 @@ static void option_instat_callback(struct urb *urb);
/* MediaTek products */
#define MEDIATEK_VENDOR_ID 0x0e8d
+#define MEDIATEK_PRODUCT_DC_1COM 0x00a0
+#define MEDIATEK_PRODUCT_DC_4COM 0x00a5
+#define MEDIATEK_PRODUCT_DC_5COM 0x00a4
+#define MEDIATEK_PRODUCT_7208_1COM 0x7101
+#define MEDIATEK_PRODUCT_7208_2COM 0x7102
+#define MEDIATEK_PRODUCT_FP_1COM 0x0003
+#define MEDIATEK_PRODUCT_FP_2COM 0x0023
+#define MEDIATEK_PRODUCT_FPDC_1COM 0x0043
+#define MEDIATEK_PRODUCT_FPDC_2COM 0x0033
/* Cellient products */
#define CELLIENT_VENDOR_ID 0x2692
@@ -554,6 +563,10 @@ static const struct option_blacklist_info net_intf1_blacklist = {
.reserved = BIT(1),
};
+static const struct option_blacklist_info net_intf2_blacklist = {
+ .reserved = BIT(2),
+};
+
static const struct option_blacklist_info net_intf3_blacklist = {
.reserved = BIT(3),
};
@@ -1099,6 +1112,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1298, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1299, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff),
+ .driver_info = (kernel_ulong_t)&net_intf2_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff,
0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
@@ -1240,6 +1255,17 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a1, 0xff, 0x02, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x00, 0x00) },
{ USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, 0x00a2, 0xff, 0x02, 0x01) }, /* MediaTek MT6276M modem & app port */
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_5COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_DC_4COM, 0xff, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_1COM, 0x02, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_7208_2COM, 0x02, 0x02, 0x01) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FP_2COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_1COM, 0x0a, 0x00, 0x00) },
+ { USB_DEVICE_AND_INTERFACE_INFO(MEDIATEK_VENDOR_ID, MEDIATEK_PRODUCT_FPDC_2COM, 0x0a, 0x00, 0x00) },
{ USB_DEVICE(CELLIENT_VENDOR_ID, CELLIENT_PRODUCT_MEN200) },
{ } /* Terminating entry */
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 10:36:49 +0000