summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-acm.c33
-rw-r--r--drivers/usb/class/cdc-wdm.c1
-rw-r--r--drivers/usb/class/usbtmc.c10
-rw-r--r--drivers/usb/core/Kconfig2
-rw-r--r--drivers/usb/core/config.c48
-rw-r--r--drivers/usb/core/devices.c10
-rw-r--r--drivers/usb/core/devio.c78
-rw-r--r--drivers/usb/core/hcd.h4
-rw-r--r--drivers/usb/core/hub.c40
-rw-r--r--drivers/usb/core/hub.h6
-rw-r--r--drivers/usb/core/message.c63
-rw-r--r--drivers/usb/gadget/Kconfig43
-rw-r--r--drivers/usb/gadget/amd5536udc.c1
-rw-r--r--drivers/usb/gadget/audio.c6
-rw-r--r--drivers/usb/gadget/ether.c11
-rw-r--r--drivers/usb/gadget/langwell_udc.c1
-rw-r--r--drivers/usb/gadget/pxa25x_udc.c24
-rw-r--r--drivers/usb/gadget/rndis.c2
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c1
-rw-r--r--drivers/usb/host/Kconfig29
-rw-r--r--drivers/usb/host/ehci-au1xxx.c2
-rw-r--r--drivers/usb/host/ehci-fsl.c2
-rw-r--r--drivers/usb/host/ehci-hcd.c37
-rw-r--r--drivers/usb/host/ehci-ixp4xx.c2
-rw-r--r--drivers/usb/host/ehci-orion.c4
-rw-r--r--drivers/usb/host/ehci-pci.c2
-rw-r--r--drivers/usb/host/ehci-ppc-of.c2
-rw-r--r--drivers/usb/host/ehci-ps3.c2
-rw-r--r--drivers/usb/host/ehci-q.c140
-rw-r--r--drivers/usb/host/ehci-sched.c12
-rw-r--r--drivers/usb/host/ehci.h2
-rw-r--r--drivers/usb/host/fhci-sched.c8
-rw-r--r--drivers/usb/host/isp1760-if.c2
-rw-r--r--drivers/usb/host/ohci-omap.c1
-rw-r--r--drivers/usb/host/r8a66597-hcd.c1
-rw-r--r--drivers/usb/host/xhci-dbg.c199
-rw-r--r--drivers/usb/host/xhci-hcd.c290
-rw-r--r--drivers/usb/host/xhci-mem.c300
-rw-r--r--drivers/usb/host/xhci-pci.c1
-rw-r--r--drivers/usb/host/xhci-ring.c305
-rw-r--r--drivers/usb/host/xhci.h148
-rw-r--r--drivers/usb/misc/Kconfig2
-rw-r--r--drivers/usb/misc/iowarrior.c1
-rw-r--r--drivers/usb/misc/rio500.c1
-rw-r--r--drivers/usb/misc/usblcd.c1
-rw-r--r--drivers/usb/musb/cppi_dma.h1
-rw-r--r--drivers/usb/musb/davinci.c32
-rw-r--r--drivers/usb/musb/musb_core.c3
-rw-r--r--drivers/usb/musb/musb_core.h1
-rw-r--r--drivers/usb/musb/musb_gadget_ep0.c2
-rw-r--r--drivers/usb/musb/musb_host.c27
-rw-r--r--drivers/usb/musb/musb_regs.h1
-rw-r--r--drivers/usb/otg/Kconfig14
-rw-r--r--drivers/usb/otg/Makefile1
-rw-r--r--drivers/usb/otg/langwell_otg.c1915
-rw-r--r--drivers/usb/otg/nop-usb-xceiv.c1
-rw-r--r--drivers/usb/serial/console.c13
-rw-r--r--drivers/usb/serial/cp210x.c5
-rw-r--r--drivers/usb/serial/cypress_m8.c4
-rw-r--r--drivers/usb/serial/ftdi_sio.c69
-rw-r--r--drivers/usb/serial/ftdi_sio.h25
-rw-r--r--drivers/usb/serial/mos7720.c2
-rw-r--r--drivers/usb/serial/mos7840.c10
-rw-r--r--drivers/usb/serial/option.c178
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h4
-rw-r--r--drivers/usb/serial/sierra.c51
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c7
-rw-r--r--drivers/usb/serial/usb-serial.c40
-rw-r--r--drivers/usb/storage/option_ms.c3
-rw-r--r--drivers/usb/storage/transport.c2
71 files changed, 1627 insertions, 2665 deletions
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 3f1045993474..e1f89416ef8c 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -387,6 +387,7 @@ static void acm_rx_tasklet(unsigned long _acm)
struct acm_ru *rcv;
unsigned long flags;
unsigned char throttled;
+ struct usb_host_endpoint *ep;
dbg("Entering acm_rx_tasklet");
@@ -462,11 +463,20 @@ urbs:
rcv->buffer = buf;
- usb_fill_bulk_urb(rcv->urb, acm->dev,
- acm->rx_endpoint,
- buf->base,
- acm->readsize,
- acm_read_bulk, rcv);
+ ep = (usb_pipein(acm->rx_endpoint) ? acm->dev->ep_in : acm->dev->ep_out)
+ [usb_pipeendpoint(acm->rx_endpoint)];
+ if (usb_endpoint_xfer_int(&ep->desc))
+ usb_fill_int_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv, ep->desc.bInterval);
+ else
+ usb_fill_bulk_urb(rcv->urb, acm->dev,
+ acm->rx_endpoint,
+ buf->base,
+ acm->readsize,
+ acm_read_bulk, rcv);
rcv->urb->transfer_dma = buf->dma;
rcv->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -740,7 +750,7 @@ static int acm_tty_chars_in_buffer(struct tty_struct *tty)
{
struct acm *acm = tty->driver_data;
if (!ACM_READY(acm))
- return -EINVAL;
+ return 0;
/*
* This is inaccurate (overcounts), but it works.
*/
@@ -1227,9 +1237,14 @@ made_compressed_probe:
goto alloc_fail7;
}
- usb_fill_bulk_urb(snd->urb, usb_dev,
- usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
- NULL, acm->writesize, acm_write_bulk, snd);
+ if (usb_endpoint_xfer_int(epwrite))
+ usb_fill_int_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd, epwrite->bInterval);
+ else
+ usb_fill_bulk_urb(snd->urb, usb_dev,
+ usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
+ NULL, acm->writesize, acm_write_bulk, snd);
snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
snd->instance = acm;
}
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 0fe434505ac4..ba589d4ca8bc 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -15,7 +15,6 @@
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/smp_lock.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include <linux/bitops.h>
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 3703789d0d2a..b09a527f7341 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -751,7 +751,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
{
struct device *dev = &data->usb_dev->dev;
char *buffer;
- int rv;
+ int rv = 0;
buffer = kmalloc(0x18, GFP_KERNEL);
if (!buffer)
@@ -763,7 +763,7 @@ static int get_capabilities(struct usbtmc_device_data *data)
0, 0, buffer, 0x18, USBTMC_TIMEOUT);
if (rv < 0) {
dev_err(dev, "usb_control_msg returned %d\n", rv);
- return rv;
+ goto err_out;
}
dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
@@ -773,7 +773,8 @@ static int get_capabilities(struct usbtmc_device_data *data)
dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]);
if (buffer[0] != USBTMC_STATUS_SUCCESS) {
dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]);
- return -EPERM;
+ rv = -EPERM;
+ goto err_out;
}
data->capabilities.interface_capabilities = buffer[4];
@@ -781,8 +782,9 @@ static int get_capabilities(struct usbtmc_device_data *data)
data->capabilities.usb488_interface_capabilities = buffer[14];
data->capabilities.usb488_device_capabilities = buffer[15];
+err_out:
kfree(buffer);
- return 0;
+ return rv;
}
#define capability_attribute(name) \
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index 69280c35b5cb..ad925946f869 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -28,7 +28,7 @@ comment "Miscellaneous USB options"
depends on USB
config USB_DEVICEFS
- bool "USB device filesystem (DEPRECATED)" if EMBEDDED
+ bool "USB device filesystem (DEPRECATED)"
depends on USB
---help---
If you say Y here (and to "/proc file system support" in the "File
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33f90cb..a16c538d0132 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
int max_tx;
int i;
- /* Allocate space for the SS endpoint companion descriptor */
- ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
- GFP_KERNEL);
- if (!ep->ss_ep_comp)
- return -ENOMEM;
desc = (struct usb_ss_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
- ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
- ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
- ep->ss_ep_comp->desc.bMaxBurst = 0;
- /*
- * Leave bmAttributes as zero, which will mean no streams for
- * bulk, and isoc won't support multiple bursts of packets.
- * With bursts of only one packet, and a Mult of 1, the max
- * amount of data moved per endpoint service interval is one
- * packet.
- */
- if (usb_endpoint_xfer_isoc(&ep->desc) ||
- usb_endpoint_xfer_int(&ep->desc))
- ep->ss_ep_comp->desc.wBytesPerInterval =
- ep->desc.wMaxPacketSize;
/*
* The next descriptor is for an Endpoint or Interface,
* no extra descriptors to copy into the companion structure,
* and we didn't eat up any of the buffer.
*/
- retval = 0;
- goto valid;
+ return 0;
}
memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
buffer += i;
size -= i;
+ /* Allocate space for the SS endpoint companion descriptor */
+ endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+ GFP_KERNEL);
+ if (!endpoint->ss_ep_comp)
+ return -ENOMEM;
+
+ /* Fill in some default values (may be overwritten later) */
+ endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+ endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+ endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+ /*
+ * Leave bmAttributes as zero, which will mean no streams for
+ * bulk, and isoc won't support multiple bursts of packets.
+ * With bursts of only one packet, and a Mult of 1, the max
+ * amount of data moved per endpoint service interval is one
+ * packet.
+ */
+ if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+ usb_endpoint_xfer_int(&endpoint->desc))
+ endpoint->ss_ep_comp->desc.wBytesPerInterval =
+ endpoint->desc.wMaxPacketSize;
+
if (size > 0) {
retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
retval = buffer - buffer0;
}
} else {
+ dev_warn(ddev, "config %d interface %d altsetting %d "
+ "endpoint 0x%X has no "
+ "SuperSpeed companion descriptor\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
retval = buffer - buffer0;
}
} else {
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c
index 73c108d117b4..96f11715cd26 100644
--- a/drivers/usb/core/devices.c
+++ b/drivers/usb/core/devices.c
@@ -136,17 +136,19 @@ static const struct class_info clas_info[] =
{USB_CLASS_AUDIO, "audio"},
{USB_CLASS_COMM, "comm."},
{USB_CLASS_HID, "HID"},
- {USB_CLASS_HUB, "hub"},
{USB_CLASS_PHYSICAL, "PID"},
+ {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_PRINTER, "print"},
{USB_CLASS_MASS_STORAGE, "stor."},
+ {USB_CLASS_HUB, "hub"},
{USB_CLASS_CDC_DATA, "data"},
- {USB_CLASS_APP_SPEC, "app."},
- {USB_CLASS_VENDOR_SPEC, "vend."},
- {USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_CSCID, "scard"},
{USB_CLASS_CONTENT_SEC, "c-sec"},
{USB_CLASS_VIDEO, "video"},
+ {USB_CLASS_WIRELESS_CONTROLLER, "wlcon"},
+ {USB_CLASS_MISC, "misc"},
+ {USB_CLASS_APP_SPEC, "app."},
+ {USB_CLASS_VENDOR_SPEC, "vend."},
{-1, "unk."} /* leave as last */
};
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index 308609039c73..38b8bce782d6 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -325,21 +325,34 @@ static void async_completed(struct urb *urb)
struct async *as = urb->context;
struct dev_state *ps = as->ps;
struct siginfo sinfo;
+ struct pid *pid = NULL;
+ uid_t uid = 0;
+ uid_t euid = 0;
+ u32 secid = 0;
+ int signr;
spin_lock(&ps->lock);
list_move_tail(&as->asynclist, &ps->async_completed);
- spin_unlock(&ps->lock);
as->status = urb->status;
- if (as->signr) {
+ signr = as->signr;
+ if (signr) {
sinfo.si_signo = as->signr;
sinfo.si_errno = as->status;
sinfo.si_code = SI_ASYNCIO;
sinfo.si_addr = as->userurb;
- kill_pid_info_as_uid(as->signr, &sinfo, as->pid, as->uid,
- as->euid, as->secid);
+ pid = as->pid;
+ uid = as->uid;
+ euid = as->euid;
+ secid = as->secid;
}
snoop(&urb->dev->dev, "urb complete\n");
snoop_urb(urb, as->userurb);
+ spin_unlock(&ps->lock);
+
+ if (signr)
+ kill_pid_info_as_uid(sinfo.si_signo, &sinfo, pid, uid,
+ euid, secid);
+
wake_up(&ps->wait);
}
@@ -982,7 +995,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
USBDEVFS_URB_ZERO_PACKET |
USBDEVFS_URB_NO_INTERRUPT))
return -EINVAL;
- if (!uurb->buffer)
+ if (uurb->buffer_length > 0 && !uurb->buffer)
return -EINVAL;
if (!(uurb->type == USBDEVFS_URB_TYPE_CONTROL &&
(uurb->endpoint & ~USB_ENDPOINT_DIR_MASK) == 0)) {
@@ -1038,11 +1051,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
is_in = 0;
uurb->endpoint &= ~USB_DIR_IN;
}
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length)) {
- kfree(dr);
- return -EFAULT;
- }
snoop(&ps->dev->dev, "control urb: bRequest=%02x "
"bRrequestType=%02x wValue=%04x "
"wIndex=%04x wLength=%04x\n",
@@ -1062,9 +1070,6 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
uurb->number_of_packets = 0;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "bulk urb\n");
break;
@@ -1106,28 +1111,35 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
return -EINVAL;
if (uurb->buffer_length > MAX_USBFS_BUFFER_SIZE)
return -EINVAL;
- if (!access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
- uurb->buffer, uurb->buffer_length))
- return -EFAULT;
snoop(&ps->dev->dev, "interrupt urb\n");
break;
default:
return -EINVAL;
}
- as = alloc_async(uurb->number_of_packets);
- if (!as) {
+ if (uurb->buffer_length > 0 &&
+ !access_ok(is_in ? VERIFY_WRITE : VERIFY_READ,
+ uurb->buffer, uurb->buffer_length)) {
kfree(isopkt);
kfree(dr);
- return -ENOMEM;
+ return -EFAULT;
}
- as->urb->transfer_buffer = kmalloc(uurb->buffer_length, GFP_KERNEL);
- if (!as->urb->transfer_buffer) {
+ as = alloc_async(uurb->number_of_packets);
+ if (!as) {
kfree(isopkt);
kfree(dr);
- free_async(as);
return -ENOMEM;
}
+ if (uurb->buffer_length > 0) {
+ as->urb->transfer_buffer = kmalloc(uurb->buffer_length,
+ GFP_KERNEL);
+ if (!as->urb->transfer_buffer) {
+ kfree(isopkt);
+ kfree(dr);
+ free_async(as);
+ return -ENOMEM;
+ }
+ }
as->urb->dev = ps->dev;
as->urb->pipe = (uurb->type << 30) |
__create_pipe(ps->dev, uurb->endpoint & 0xf) |
@@ -1169,7 +1181,7 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
kfree(isopkt);
as->ps = ps;
as->userurb = arg;
- if (uurb->endpoint & USB_DIR_IN)
+ if (is_in && uurb->buffer_length > 0)
as->userbuffer = uurb->buffer;
else
as->userbuffer = NULL;
@@ -1179,9 +1191,9 @@ static int proc_do_submiturb(struct dev_state *ps, struct usbdevfs_urb *uurb,
as->uid = cred->uid;
as->euid = cred->euid;
security_task_getsecid(current, &as->secid);
- if (!is_in) {
+ if (!is_in && uurb->buffer_length > 0) {
if (copy_from_user(as->urb->transfer_buffer, uurb->buffer,
- as->urb->transfer_buffer_length)) {
+ uurb->buffer_length)) {
free_async(as);
return -EFAULT;
}
@@ -1231,22 +1243,22 @@ static int processcompl(struct async *as, void __user * __user *arg)
if (as->userbuffer)
if (copy_to_user(as->userbuffer, urb->transfer_buffer,
urb->transfer_buffer_length))
- return -EFAULT;
+ goto err_out;
if (put_user(as->status, &userurb->status))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->actual_length, &userurb->actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->error_count, &userurb->error_count))
- return -EFAULT;
+ goto err_out;
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
for (i = 0; i < urb->number_of_packets; i++) {
if (put_user(urb->iso_frame_desc[i].actual_length,
&userurb->iso_frame_desc[i].actual_length))
- return -EFAULT;
+ goto err_out;
if (put_user(urb->iso_frame_desc[i].status,
&userurb->iso_frame_desc[i].status))
- return -EFAULT;
+ goto err_out;
}
}
@@ -1255,6 +1267,10 @@ static int processcompl(struct async *as, void __user * __user *arg)
if (put_user(addr, (void __user * __user *)arg))
return -EFAULT;
return 0;
+
+err_out:
+ free_async(as);
+ return -EFAULT;
}
static struct async *reap_as(struct dev_state *ps)
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index d397ecfd5b17..ec5c67ea07b7 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -227,6 +227,10 @@ struct hc_driver {
/* has a port been handed over to a companion? */
int (*port_handed_over)(struct usb_hcd *, int);
+ /* CLEAR_TT_BUFFER completion callback */
+ void (*clear_tt_buffer_complete)(struct usb_hcd *,
+ struct usb_host_endpoint *);
+
/* xHCI specific functions */
/* Called by usb_alloc_dev to alloc HC device structures */
int (*alloc_dev)(struct usb_hcd *, struct usb_device *);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2af3b4f06054..71f86c60d83c 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -450,10 +450,10 @@ hub_clear_tt_buffer (struct usb_device *hdev, u16 devinfo, u16 tt)
* talking to TTs must queue control transfers (not just bulk and iso), so
* both can talk to the same hub concurrently.
*/
-static void hub_tt_kevent (struct work_struct *work)
+static void hub_tt_work(struct work_struct *work)
{
struct usb_hub *hub =
- container_of(work, struct usb_hub, tt.kevent);
+ container_of(work, struct usb_hub, tt.clear_work);
unsigned long flags;
int limit = 100;
@@ -462,6 +462,7 @@ static void hub_tt_kevent (struct work_struct *work)
struct list_head *next;
struct usb_tt_clear *clear;
struct usb_device *hdev = hub->hdev;
+ const struct hc_driver *drv;
int status;
next = hub->tt.clear_list.next;
@@ -471,21 +472,25 @@ static void hub_tt_kevent (struct work_struct *work)
/* drop lock so HCD can concurrently report other TT errors */
spin_unlock_irqrestore (&hub->tt.lock, flags);
status = hub_clear_tt_buffer (hdev, clear->devinfo, clear->tt);
- spin_lock_irqsave (&hub->tt.lock, flags);
-
if (status)
dev_err (&hdev->dev,
"clear tt %d (%04x) error %d\n",
clear->tt, clear->devinfo, status);
+
+ /* Tell the HCD, even if the operation failed */
+ drv = clear->hcd->driver;
+ if (drv->clear_tt_buffer_complete)
+ (drv->clear_tt_buffer_complete)(clear->hcd, clear->ep);
+
kfree(clear);
+ spin_lock_irqsave(&hub->tt.lock, flags);
}
spin_unlock_irqrestore (&hub->tt.lock, flags);
}
/**
- * usb_hub_tt_clear_buffer - clear control/bulk TT state in high speed hub
- * @udev: the device whose split transaction failed
- * @pipe: identifies the endpoint of the failed transaction
+ * usb_hub_clear_tt_buffer - clear control/bulk TT state in high speed hub
+ * @urb: an URB associated with the failed or incomplete split transaction
*
* High speed HCDs use this to tell the hub driver that some split control or
* bulk transaction failed in a way that requires clearing internal state of
@@ -495,8 +500,10 @@ static void hub_tt_kevent (struct work_struct *work)
* It may not be possible for that hub to handle additional full (or low)
* speed transactions until that state is fully cleared out.
*/
-void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
+int usb_hub_clear_tt_buffer(struct urb *urb)
{
+ struct usb_device *udev = urb->dev;
+ int pipe = urb->pipe;
struct usb_tt *tt = udev->tt;
unsigned long flags;
struct usb_tt_clear *clear;
@@ -508,7 +515,7 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
if ((clear = kmalloc (sizeof *clear, GFP_ATOMIC)) == NULL) {
dev_err (&udev->dev, "can't save CLEAR_TT_BUFFER state\n");
/* FIXME recover somehow ... RESET_TT? */
- return;
+ return -ENOMEM;
}
/* info that CLEAR_TT_BUFFER needs */
@@ -520,14 +527,19 @@ void usb_hub_tt_clear_buffer (struct usb_device *udev, int pipe)
: (USB_ENDPOINT_XFER_BULK << 11);
if (usb_pipein (pipe))
clear->devinfo |= 1 << 15;
-
+
+ /* info for completion callback */
+ clear->hcd = bus_to_hcd(udev->bus);
+ clear->ep = urb->ep;
+
/* tell keventd to clear state for this TT */
spin_lock_irqsave (&tt->lock, flags);
list_add_tail (&clear->clear_list, &tt->clear_list);
- schedule_work (&tt->kevent);
+ schedule_work(&tt->clear_work);
spin_unlock_irqrestore (&tt->lock, flags);
+ return 0;
}
-EXPORT_SYMBOL_GPL(usb_hub_tt_clear_buffer);
+EXPORT_SYMBOL_GPL(usb_hub_clear_tt_buffer);
/* If do_delay is false, return the number of milliseconds the caller
* needs to delay.
@@ -818,7 +830,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
if (hub->has_indicators)
cancel_delayed_work_sync(&hub->leds);
if (hub->tt.hub)
- cancel_work_sync(&hub->tt.kevent);
+ cancel_work_sync(&hub->tt.clear_work);
}
/* caller has locked the hub device */
@@ -935,7 +947,7 @@ static int hub_configure(struct usb_hub *hub,
spin_lock_init (&hub->tt.lock);
INIT_LIST_HEAD (&hub->tt.clear_list);
- INIT_WORK (&hub->tt.kevent, hub_tt_kevent);
+ INIT_WORK(&hub->tt.clear_work, hub_tt_work);
switch (hdev->descriptor.bDeviceProtocol) {
case 0:
break;
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 889c0f32a40b..de8081f065ed 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -188,16 +188,18 @@ struct usb_tt {
/* for control/bulk error recovery (CLEAR_TT_BUFFER) */
spinlock_t lock;
struct list_head clear_list; /* of usb_tt_clear */
- struct work_struct kevent;
+ struct work_struct clear_work;
};
struct usb_tt_clear {
struct list_head clear_list;
unsigned tt;
u16 devinfo;
+ struct usb_hcd *hcd;
+ struct usb_host_endpoint *ep;
};
-extern void usb_hub_tt_clear_buffer(struct usb_device *dev, int pipe);
+extern int usb_hub_clear_tt_buffer(struct urb *urb);
extern void usb_ep0_reinit(struct usb_device *);
#endif /* __LINUX_HUB_H */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 2bed83caacb1..9720e699f472 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -806,6 +806,48 @@ static int usb_string_sub(struct usb_device *dev, unsigned int langid,
return rc;
}
+static int usb_get_langid(struct usb_device *dev, unsigned char *tbuf)
+{
+ int err;
+
+ if (dev->have_langid)
+ return 0;
+
+ if (dev->string_langid < 0)
+ return -EPIPE;
+
+ err = usb_string_sub(dev, 0, 0, tbuf);
+
+ /* If the string was reported but is malformed, default to english
+ * (0x0409) */
+ if (err == -ENODATA || (err > 0 && err < 4)) {
+ dev->string_langid = 0x0409;
+ dev->have_langid = 1;
+ dev_err(&dev->dev,
+ "string descriptor 0 malformed (err = %d), "
+ "defaulting to 0x%04x\n",
+ err, dev->string_langid);
+ return 0;
+ }
+
+ /* In case of all other errors, we assume the device is not able to
+ * deal with strings at all. Set string_langid to -1 in order to
+ * prevent any string to be retrieved from the device */
+ if (err < 0) {
+ dev_err(&dev->dev, "string descriptor 0 read error: %d\n",
+ err);
+ dev->string_langid = -1;
+ return -EPIPE;
+ }
+
+ /* always use the first langid listed */
+ dev->string_langid = tbuf[2] | (tbuf[3] << 8);
+ dev->have_langid = 1;
+ dev_dbg(&dev->dev, "default language 0x%04x\n",
+ dev->string_langid);
+ return 0;
+}
+
/**
* usb_string - returns UTF-8 version of a string descriptor
* @dev: the device whose string descriptor is being retrieved
@@ -837,24 +879,9 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size)
if (!tbuf)
return -ENOMEM;
- /* get langid for strings if it's not yet known */
- if (!dev->have_langid) {
- err = usb_string_sub(dev, 0, 0, tbuf);
- if (err < 0) {
- dev_err(&dev->dev,
- "string descriptor 0 read error: %d\n",
- err);
- } else if (err < 4) {
- dev_err(&dev->dev, "string descriptor 0 too short\n");
- } else {
- dev->string_langid = tbuf[2] | (tbuf[3] << 8);
- /* always use the first langid listed */
- dev_dbg(&dev->dev, "default language 0x%04x\n",
- dev->string_langid);
- }
-
- dev->have_langid = 1;
- }
+ err = usb_get_langid(dev, tbuf);
+ if (err < 0)
+ goto errout;
err = usb_string_sub(dev, dev->string_langid, index, tbuf);
if (err < 0)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 5d1ddf485d1e..7f8e83a954ac 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -286,6 +286,27 @@ config USB_S3C_HSOTG
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_IMX
+ boolean "Freescale IMX USB Peripheral Controller"
+ depends on ARCH_MX1
+ help
+ Freescale's IMX series include an integrated full speed
+ USB 1.1 device controller. The controller in the IMX series
+ is register-compatible.
+
+ It has Six fixed-function endpoints, as well as endpoint
+ zero (for control transfers).
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "imx_udc" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_IMX
+ tristate
+ depends on USB_GADGET_IMX
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
config USB_GADGET_S3C2410
boolean "S3C2410 USB Device Controller"
depends on ARCH_S3C2410
@@ -321,27 +342,6 @@ config USB_GADGET_MUSB_HDRC
This OTG-capable silicon IP is used in dual designs including
the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin
-config USB_GADGET_IMX
- boolean "Freescale IMX USB Peripheral Controller"
- depends on ARCH_MX1
- help
- Freescale's IMX series include an integrated full speed
- USB 1.1 device controller. The controller in the IMX series
- is register-compatible.
-
- It has Six fixed-function endpoints, as well as endpoint
- zero (for control transfers).
-
- Say "y" to link the driver statically, or "m" to build a
- dynamically linked module called "imx_udc" and force all
- gadget drivers to also be dynamically linked.
-
-config USB_IMX
- tristate
- depends on USB_GADGET_IMX
- default USB_GADGET
- select USB_GADGET_SELECTED
-
config USB_GADGET_M66592
boolean "Renesas M66592 USB Peripheral Controller"
select USB_GADGET_DUALSPEED
@@ -604,6 +604,7 @@ config USB_ZERO_HNPTEST
config USB_AUDIO
tristate "Audio Gadget (EXPERIMENTAL)"
depends on SND
+ select SND_PCM
help
Gadget Audio is compatible with USB Audio Class specification 1.0.
It will include at least one AudioControl interface, zero or more
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index 826f3adde5d8..77352ccc245e 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -48,7 +48,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/audio.c b/drivers/usb/gadget/audio.c
index 94de7e864614..9f80f4e970bd 100644
--- a/drivers/usb/gadget/audio.c
+++ b/drivers/usb/gadget/audio.c
@@ -42,9 +42,9 @@
* Instead: allocate your own, using normal USB-IF procedures.
*/
-/* Thanks to NetChip Technologies for donating this product ID. */
-#define AUDIO_VENDOR_NUM 0x0525 /* NetChip */
-#define AUDIO_PRODUCT_NUM 0xa4a1 /* Linux-USB Audio Gadget */
+/* Thanks to Linux Foundation for donating this product ID. */
+#define AUDIO_VENDOR_NUM 0x1d6b /* Linux Foundation */
+#define AUDIO_PRODUCT_NUM 0x0101 /* Linux-USB Audio Gadget */
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index d006dc652e02..bd102f5052ba 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -293,15 +293,16 @@ static int __init eth_bind(struct usb_composite_dev *cdev)
/* CDC Subset */
eth_config_driver.label = "CDC Subset/SAFE";
- device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM),
- device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
+ device_desc.idVendor = cpu_to_le16(SIMPLE_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(SIMPLE_PRODUCT_NUM);
+ if (!has_rndis())
+ device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
}
if (has_rndis()) {
/* RNDIS plus ECM-or-Subset */
- device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM),
- device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM),
+ device_desc.idVendor = cpu_to_le16(RNDIS_VENDOR_NUM);
+ device_desc.idProduct = cpu_to_le16(RNDIS_PRODUCT_NUM);
device_desc.bNumConfigurations = 2;
}
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 6829d5961359..a3913519fd58 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -34,7 +34,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c
index 0ce4e2819847..ed21e263f832 100644
--- a/drivers/usb/gadget/pxa25x_udc.c
+++ b/drivers/usb/gadget/pxa25x_udc.c
@@ -139,7 +139,7 @@ static int is_vbus_present(void)
{
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
- if (mach->gpio_vbus) {
+ if (gpio_is_valid(mach->gpio_vbus)) {
int value = gpio_get_value(mach->gpio_vbus);
if (mach->gpio_vbus_inverted)
@@ -158,7 +158,7 @@ static void pullup_off(void)
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int off_level = mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, off_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
@@ -169,7 +169,7 @@ static void pullup_on(void)
struct pxa2xx_udc_mach_info *mach = the_controller->mach;
int on_level = !mach->gpio_pullup_inverted;
- if (mach->gpio_pullup)
+ if (gpio_is_valid(mach->gpio_pullup))
gpio_set_value(mach->gpio_pullup, on_level);
else if (mach->udc_command)
mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
@@ -1000,7 +1000,7 @@ static int pxa25x_udc_pullup(struct usb_gadget *_gadget, int is_active)
udc = container_of(_gadget, struct pxa25x_udc, gadget);
/* not all boards support pullup control */
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
return -EOPNOTSUPP;
udc->pullup = (is_active != 0);
@@ -1802,11 +1802,13 @@ pxa25x_udc_irq(int irq, void *_dev)
USIR0 |= tmp;
handled = 1;
}
+#ifndef CONFIG_USB_PXA25X_SMALL
if (usir1 & tmp) {
handle_ep(&dev->ep[i+8]);
USIR1 |= tmp;
handled = 1;
}
+#endif
}
}
@@ -2160,7 +2162,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
dev->dev = &pdev->dev;
dev->mach = pdev->dev.platform_data;
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
if ((retval = gpio_request(dev->mach->gpio_vbus,
"pxa25x_udc GPIO VBUS"))) {
dev_dbg(&pdev->dev,
@@ -2173,7 +2175,7 @@ static int __init pxa25x_udc_probe(struct platform_device *pdev)
} else
vbus_irq = 0;
- if (dev->mach->gpio_pullup) {
+ if (gpio_is_valid(dev->mach->gpio_pullup)) {
if ((retval = gpio_request(dev->mach->gpio_pullup,
"pca25x_udc GPIO PULLUP"))) {
dev_dbg(&pdev->dev,
@@ -2256,10 +2258,10 @@ lubbock_fail0:
#endif
free_irq(irq, dev);
err_irq1:
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
err_gpio_pullup:
- if (dev->mach->gpio_vbus)
+ if (gpio_is_valid(dev->mach->gpio_vbus))
gpio_free(dev->mach->gpio_vbus);
err_gpio_vbus:
clk_put(dev->clk);
@@ -2294,11 +2296,11 @@ static int __exit pxa25x_udc_remove(struct platform_device *pdev)
free_irq(LUBBOCK_USB_IRQ, dev);
}
#endif
- if (dev->mach->gpio_vbus) {
+ if (gpio_is_valid(dev->mach->gpio_vbus)) {
free_irq(gpio_to_irq(dev->mach->gpio_vbus), dev);
gpio_free(dev->mach->gpio_vbus);
}
- if (dev->mach->gpio_pullup)
+ if (gpio_is_valid(dev->mach->gpio_pullup))
gpio_free(dev->mach->gpio_pullup);
clk_put(dev->clk);
@@ -2329,7 +2331,7 @@ static int pxa25x_udc_suspend(struct platform_device *dev, pm_message_t state)
struct pxa25x_udc *udc = platform_get_drvdata(dev);
unsigned long flags;
- if (!udc->mach->gpio_pullup && !udc->mach->udc_command)
+ if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command)
WARNING("USB host won't detect disconnect!\n");
udc->suspended = 1;
diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c
index 2b4660e08c4d..ca41b0b5afb3 100644
--- a/drivers/usb/gadget/rndis.c
+++ b/drivers/usb/gadget/rndis.c
@@ -442,6 +442,8 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len,
case OID_802_3_MAC_OPTIONS:
pr_debug("%s: OID_802_3_MAC_OPTIONS\n", __func__);
+ *outbuf = cpu_to_le32(0);
+ retval = 0;
break;
/* ieee802.3 statistics OIDs (table 4-4) */
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index 9a2b8920532d..a9b452fe6221 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -28,7 +28,6 @@
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 0c03471f0d41..1a920c70b5a1 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -181,26 +181,27 @@ config USB_OHCI_HCD_PPC_SOC
Enables support for the USB controller on the MPC52xx or
STB03xxx processor chip. If unsure, say Y.
-config USB_OHCI_HCD_PPC_OF
- bool "OHCI support for PPC USB controller on OF platform bus"
- depends on USB_OHCI_HCD && PPC_OF
- default y
- ---help---
- Enables support for the USB controller PowerPC present on the
- OpenFirmware platform bus.
-
config USB_OHCI_HCD_PPC_OF_BE
- bool "Support big endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default y
+ bool "OHCI support for OF platform bus (big endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_BIG_ENDIAN_DESC
select USB_OHCI_BIG_ENDIAN_MMIO
+ ---help---
+ Enables support for big-endian USB controllers present on the
+ OpenFirmware platform bus.
config USB_OHCI_HCD_PPC_OF_LE
- bool "Support little endian HC"
- depends on USB_OHCI_HCD_PPC_OF
- default n
+ bool "OHCI support for OF platform bus (little endian)"
+ depends on USB_OHCI_HCD && PPC_OF
select USB_OHCI_LITTLE_ENDIAN
+ ---help---
+ Enables support for little-endian USB controllers present on the
+ OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF
+ bool
+ depends on USB_OHCI_HCD && PPC_OF
+ default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index c3a778bd359c..59d208d94d4e 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -113,6 +113,8 @@ static const struct hc_driver ehci_au1xxx_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_hcd_au1xxx_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index bf86809c5120..991174937db3 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -325,6 +325,8 @@ static const struct hc_driver ehci_fsl_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 2b72473544d3..7d03549c3339 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1003,6 +1003,8 @@ idle_timeout:
schedule_timeout_uninterruptible(1);
goto rescan;
case QH_STATE_IDLE: /* fully unlinked */
+ if (qh->clearing_tt)
+ goto idle_timeout;
if (list_empty (&qh->qtd_list)) {
qh_put (qh);
break;
@@ -1030,12 +1032,14 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
struct ehci_qh *qh;
int eptype = usb_endpoint_type(&ep->desc);
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ unsigned long flags;
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
return;
- rescan:
- spin_lock_irq(&ehci->lock);
+ spin_lock_irqsave(&ehci->lock, flags);
qh = ep->hcpriv;
/* For Bulk and Interrupt endpoints we maintain the toggle state
@@ -1044,29 +1048,24 @@ ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
* the toggle bit in the QH.
*/
if (qh) {
+ usb_settoggle(qh->dev, epnum, is_out, 0);
if (!list_empty(&qh->qtd_list)) {
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
- } else if (qh->qh_state == QH_STATE_IDLE) {
- qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
- } else {
- /* It's not safe to write into the overlay area
- * while the QH is active. Unlink it first and
- * wait for the unlink to complete.
+ } else if (qh->qh_state == QH_STATE_LINKED) {
+
+ /* The toggle value in the QH can't be updated
+ * while the QH is active. Unlink it now;
+ * re-linking will call qh_refresh().
*/
- if (qh->qh_state == QH_STATE_LINKED) {
- if (eptype == USB_ENDPOINT_XFER_BULK) {
- unlink_async(ehci, qh);
- } else {
- intr_deschedule(ehci, qh);
- (void) qh_schedule(ehci, qh);
- }
+ if (eptype == USB_ENDPOINT_XFER_BULK) {
+ unlink_async(ehci, qh);
+ } else {
+ intr_deschedule(ehci, qh);
+ (void) qh_schedule(ehci, qh);
}
- spin_unlock_irq(&ehci->lock);
- schedule_timeout_uninterruptible(1);
- goto rescan;
}
}
- spin_unlock_irq(&ehci->lock);
+ spin_unlock_irqrestore(&ehci->lock, flags);
}
static int ehci_get_frame (struct usb_hcd *hcd)
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index a44bb4a94954..89b7c70c6ed6 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -61,6 +61,8 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = {
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 770dd9aba62a..1d283e1b2b8d 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,6 +105,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
+ ehci_reset(ehci);
retval = ehci_halt(ehci);
if (retval)
return retval;
@@ -118,7 +119,6 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
hcd->has_tt = 1;
- ehci_reset(ehci);
ehci_port_power(ehci, 0);
return retval;
@@ -165,6 +165,8 @@ static const struct hc_driver ehci_orion_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static void __init
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index f3683e1da161..c2f1b7df918c 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -404,6 +404,8 @@ static const struct hc_driver ehci_pci_hc_driver = {
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index fbd272288fc2..36f96da129f5 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -79,6 +79,8 @@ static const struct hc_driver ehci_ppc_of_hc_driver = {
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 93f7035d00a1..1dee33b9139e 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -75,6 +75,8 @@ static const struct hc_driver ps3_ehci_hc_driver = {
#endif
.relinquish_port = ehci_relinquish_port,
.port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};
static int __devinit ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index 3192f683f807..9a1384747f3b 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -93,6 +93,22 @@ qh_update (struct ehci_hcd *ehci, struct ehci_qh *qh, struct ehci_qtd *qtd)
qh->hw_qtd_next = QTD_NEXT(ehci, qtd->qtd_dma);
qh->hw_alt_next = EHCI_LIST_END(ehci);
+ /* Except for control endpoints, we make hardware maintain data
+ * toggle (like OHCI) ... here (re)initialize the toggle in the QH,
+ * and set the pseudo-toggle in udev. Only usb_clear_halt() will
+ * ever clear it.
+ */
+ if (!(qh->hw_info1 & cpu_to_hc32(ehci, 1 << 14))) {
+ unsigned is_out, epnum;
+
+ is_out = !(qtd->hw_token & cpu_to_hc32(ehci, 1 << 8));
+ epnum = (hc32_to_cpup(ehci, &qh->hw_info1) >> 8) & 0x0f;
+ if (unlikely (!usb_gettoggle (qh->dev, epnum, is_out))) {
+ qh->hw_token &= ~cpu_to_hc32(ehci, QTD_TOGGLE);
+ usb_settoggle (qh->dev, epnum, is_out, 1);
+ }
+ }
+
/* HC must see latest qtd and qh data before we clear ACTIVE+HALT */
wmb ();
qh->hw_token &= cpu_to_hc32(ehci, QTD_TOGGLE | QTD_STS_PING);
@@ -123,6 +139,55 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh)
/*-------------------------------------------------------------------------*/
+static void qh_link_async(struct ehci_hcd *ehci, struct ehci_qh *qh);
+
+static void ehci_clear_tt_buffer_complete(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ struct ehci_qh *qh = ep->hcpriv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ehci->lock, flags);
+ qh->clearing_tt = 0;
+ if (qh->qh_state == QH_STATE_IDLE && !list_empty(&qh->qtd_list)
+ && HC_IS_RUNNING(hcd->state))
+ qh_link_async(ehci, qh);
+ spin_unlock_irqrestore(&ehci->lock, flags);
+}
+
+static void ehci_clear_tt_buffer(struct ehci_hcd *ehci, struct ehci_qh *qh,
+ struct urb *urb, u32 token)
+{
+
+ /* If an async split transaction gets an error or is unlinked,
+ * the TT buffer may be left in an indeterminate state. We
+ * have to clear the TT buffer.
+ *
+ * Note: this routine is never called for Isochronous transfers.
+ */
+ if (urb->dev->tt && !usb_pipeint(urb->pipe) && !qh->clearing_tt) {
+#ifdef DEBUG
+ struct usb_device *tt = urb->dev->tt->hub;
+ dev_dbg(&tt->dev,
+ "clear tt buffer port %d, a%d ep%d t%08x\n",
+ urb->dev->ttport, urb->dev->devnum,
+ usb_pipeendpoint(urb->pipe), token);
+#endif /* DEBUG */
+ if (!ehci_is_TDI(ehci)
+ || urb->dev->tt->hub !=
+ ehci_to_hcd(ehci)->self.root_hub) {
+ if (usb_hub_clear_tt_buffer(urb) == 0)
+ qh->clearing_tt = 1;
+ } else {
+
+ /* REVISIT ARC-derived cores don't clear the root
+ * hub TT buffer in this way...
+ */
+ }
+ }
+}
+
static int qtd_copy_status (
struct ehci_hcd *ehci,
struct urb *urb,
@@ -149,6 +214,14 @@ static int qtd_copy_status (
if (token & QTD_STS_BABBLE) {
/* FIXME "must" disable babbling device's port too */
status = -EOVERFLOW;
+ /* CERR nonzero + halt --> stall */
+ } else if (QTD_CERR(token)) {
+ status = -EPIPE;
+
+ /* In theory, more than one of the following bits can be set
+ * since they are sticky and the transaction is retried.
+ * Which to test first is rather arbitrary.
+ */
} else if (token & QTD_STS_MMF) {
/* fs/ls interrupt xfer missed the complete-split */
status = -EPROTO;
@@ -157,21 +230,15 @@ static int qtd_copy_status (
? -ENOSR /* hc couldn't read data */
: -ECOMM; /* hc couldn't write data */
} else if (token & QTD_STS_XACT) {
- /* timeout, bad crc, wrong PID, etc; retried */
- if (QTD_CERR (token))
- status = -EPIPE;
- else {
- ehci_dbg (ehci, "devpath %s ep%d%s 3strikes\n",
- urb->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out");
- status = -EPROTO;
- }
- /* CERR nonzero + no errors + halt --> stall */
- } else if (QTD_CERR (token))
- status = -EPIPE;
- else /* unknown */
+ /* timeout, bad CRC, wrong PID, etc */
+ ehci_dbg(ehci, "devpath %s ep%d%s 3strikes\n",
+ urb->dev->devpath,
+ usb_pipeendpoint(urb->pipe),
+ usb_pipein(urb->pipe) ? "in" : "out");
+ status = -EPROTO;
+ } else { /* unknown */
status = -EPROTO;
+ }
ehci_vdbg (ehci,
"dev%d ep%d%s qtd token %08x --> status %d\n",
@@ -179,28 +246,6 @@ static int qtd_copy_status (
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
token, status);
-
- /* if async CSPLIT failed, try cleaning out the TT buffer */
- if (status != -EPIPE
- && urb->dev->tt
- && !usb_pipeint(urb->pipe)
- && ((token & QTD_STS_MMF) != 0
- || QTD_CERR(token) == 0)
- && (!ehci_is_TDI(ehci)
- || urb->dev->tt->hub !=
- ehci_to_hcd(ehci)->self.root_hub)) {
-#ifdef DEBUG
- struct usb_device *tt = urb->dev->tt->hub;
- dev_dbg (&tt->dev,
- "clear tt buffer port %d, a%d ep%d t%08x\n",
- urb->dev->ttport, urb->dev->devnum,
- usb_pipeendpoint (urb->pipe), token);
-#endif /* DEBUG */
- /* REVISIT ARC-derived cores don't clear the root
- * hub TT buffer in this way...
- */
- usb_hub_tt_clear_buffer (urb->dev, urb->pipe);
- }
}
return status;
@@ -391,9 +436,16 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh)
/* qh unlinked; token in overlay may be most current */
if (state == QH_STATE_IDLE
&& cpu_to_hc32(ehci, qtd->qtd_dma)
- == qh->hw_current)
+ == qh->hw_current) {
token = hc32_to_cpu(ehci, qh->hw_token);
+ /* An unlink may leave an incomplete
+ * async transaction in the TT buffer.
+ * We have to clear it.
+ */
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
+ }
+
/* force halt for unlinked or blocked qh, so we'll
* patch the qh later and so that completions can't
* activate it while we "know" it's stopped.
@@ -419,6 +471,13 @@ halt:
&& (qtd->hw_alt_next
& EHCI_LIST_END(ehci)))
last_status = -EINPROGRESS;
+
+ /* As part of low/full-speed endpoint-halt processing
+ * we must clear the TT buffer (11.17.5).
+ */
+ if (unlikely(last_status != -EINPROGRESS &&
+ last_status != -EREMOTEIO))
+ ehci_clear_tt_buffer(ehci, qh, urb, token);
}
/* if we're removing something not at the queue head,
@@ -834,6 +893,7 @@ done:
qh->qh_state = QH_STATE_IDLE;
qh->hw_info1 = cpu_to_hc32(ehci, info1);
qh->hw_info2 = cpu_to_hc32(ehci, info2);
+ usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe), !is_input, 1);
qh_refresh (ehci, qh);
return qh;
}
@@ -847,6 +907,10 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
__hc32 dma = QH_NEXT(ehci, qh->qh_dma);
struct ehci_qh *head;
+ /* Don't link a QH if there's a Clear-TT-Buffer pending */
+ if (unlikely(qh->clearing_tt))
+ return;
+
/* (re)start the async schedule? */
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
@@ -864,7 +928,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
}
}
- /* clear halt and maybe recover from silicon quirk */
+ /* clear halt and/or toggle; and maybe recover from silicon quirk */
if (qh->qh_state == QH_STATE_IDLE)
qh_refresh (ehci, qh);
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index 9d1babc7ff65..74f7f83b29ad 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1619,11 +1619,14 @@ itd_complete (
desc->status = -EPROTO;
/* HC need not update length with this error */
- if (!(t & EHCI_ISOC_BABBLE))
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ if (!(t & EHCI_ISOC_BABBLE)) {
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
+ }
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
- desc->actual_length = EHCI_ITD_LENGTH (t);
+ desc->actual_length = EHCI_ITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
} else {
/* URB was too late */
desc->status = -EXDEV;
@@ -2014,7 +2017,8 @@ sitd_complete (
desc->status = -EPROTO;
} else {
desc->status = 0;
- desc->actual_length = desc->length - SITD_LENGTH (t);
+ desc->actual_length = desc->length - SITD_LENGTH(t);
+ urb->actual_length += desc->actual_length;
}
stream->depth -= stream->interval << 3;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 90ad3395bb21..2bfff30f4704 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -354,7 +354,9 @@ struct ehci_qh {
unsigned short period; /* polling interval */
unsigned short start; /* where polling starts */
#define NO_FRAME ((unsigned short)~0) /* pick new start */
+
struct usb_device *dev; /* access to TT */
+ unsigned clearing_tt:1; /* Clear-TT-Buf in progress */
} __attribute__ ((aligned (32)));
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c
index bb63b68ddb77..62a226b61670 100644
--- a/drivers/usb/host/fhci-sched.c
+++ b/drivers/usb/host/fhci-sched.c
@@ -576,9 +576,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
out_be16(&usb->fhci->regs->usb_event,
usb->saved_msk);
} else if (usb->port_status == FHCI_PORT_DISABLED) {
- if (fhci_ioports_check_bus_state(fhci) == 1 &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL)
+ if (fhci_ioports_check_bus_state(fhci) == 1)
fhci_device_connected_interrupt(fhci);
}
usb_er &= ~USB_E_RESET_MASK;
@@ -605,9 +603,7 @@ irqreturn_t fhci_irq(struct usb_hcd *hcd)
}
if (usb_er & USB_E_IDLE_MASK) {
- if (usb->port_status == FHCI_PORT_DISABLED &&
- usb->port_status != FHCI_PORT_LOW &&
- usb->port_status != FHCI_PORT_FULL) {
+ if (usb->port_status == FHCI_PORT_DISABLED) {
usb_er &= ~USB_E_RESET_MASK;
fhci_device_connected_interrupt(fhci);
} else if (usb->port_status ==
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 3fa3a1702796..d4feebfc63bd 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -361,7 +361,7 @@ static int __devexit isp1760_plat_remove(struct platform_device *pdev)
static struct platform_driver isp1760_plat_driver = {
.probe = isp1760_plat_probe,
- .remove = isp1760_plat_remove,
+ .remove = __devexit_p(isp1760_plat_remove),
.driver = {
.name = "isp1760",
},
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f3aaba35e912..83cbecd2a1ed 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -282,6 +282,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
static void ohci_omap_stop(struct usb_hcd *hcd)
{
dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+ ohci_stop(hcd);
omap_ohci_clock_power(0);
}
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index 56976cc0352a..e18f74946e68 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -26,7 +26,6 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/sched.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/timer.h>
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2501c571f855..705e34324156 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -173,6 +173,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
{
void *addr;
u32 temp;
+ u64 temp_64;
addr = &ir_set->irq_pending;
temp = xhci_readl(xhci, addr);
@@ -200,25 +201,15 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
xhci_dbg(xhci, " WARN: %p: ir_set.rsvd = 0x%x\n",
addr, (unsigned int)temp);
- addr = &ir_set->erst_base[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[0] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_base[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_base[1] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_base;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n",
+ addr, temp_64);
- addr = &ir_set->erst_dequeue[0];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[0] = 0x%x\n",
- addr, (unsigned int) temp);
-
- addr = &ir_set->erst_dequeue[1];
- temp = xhci_readl(xhci, addr);
- xhci_dbg(xhci, " %p: ir_set.erst_dequeue[1] = 0x%x\n",
- addr, (unsigned int) temp);
+ addr = &ir_set->erst_dequeue;
+ temp_64 = xhci_read_64(xhci, addr);
+ xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n",
+ addr, temp_64);
}
void xhci_print_run_regs(struct xhci_hcd *xhci)
@@ -268,8 +259,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
xhci_dbg(xhci, "Link TRB:\n");
xhci_print_trb_offsets(xhci, trb);
- address = trb->link.segment_ptr[0] +
- (((u64) trb->link.segment_ptr[1]) << 32);
+ address = trb->link.segment_ptr;
xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
xhci_dbg(xhci, "Interrupter target = 0x%x\n",
@@ -282,8 +272,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
(unsigned int) (trb->link.control & TRB_NO_SNOOP));
break;
case TRB_TYPE(TRB_TRANSFER):
- address = trb->trans_event.buffer[0] +
- (((u64) trb->trans_event.buffer[1]) << 32);
+ address = trb->trans_event.buffer;
/*
* FIXME: look at flags to figure out if it's an address or if
* the data is directly in the buffer field.
@@ -291,8 +280,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
break;
case TRB_TYPE(TRB_COMPLETION):
- address = trb->event_cmd.cmd_trb[0] +
- (((u64) trb->event_cmd.cmd_trb[1]) << 32);
+ address = trb->event_cmd.cmd_trb;
xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
xhci_dbg(xhci, "Completion status = %u\n",
(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
@@ -328,8 +316,8 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
trb = &seg->trbs[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
- (unsigned int) trb->link.segment_ptr[0],
- (unsigned int) trb->link.segment_ptr[1],
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
(unsigned int) trb->link.intr_target,
(unsigned int) trb->link.control);
addr += sizeof(*trb);
@@ -386,8 +374,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
entry = &erst->entries[i];
xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
(unsigned int) addr,
- (unsigned int) entry->seg_addr[0],
- (unsigned int) entry->seg_addr[1],
+ lower_32_bits(entry->seg_addr),
+ upper_32_bits(entry->seg_addr),
(unsigned int) entry->seg_size,
(unsigned int) entry->rsvd);
addr += sizeof(*entry);
@@ -396,90 +384,147 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
{
- u32 val;
+ u64 val;
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
- xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+ val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+ lower_32_bits(val));
+ xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+ upper_32_bits(val));
}
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+ int i;
+ for (i = 0; i < 4; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx "
+ "(dma) %#08llx - rsvd64[%d]\n",
+ &ctx[4 + i], (unsigned long long)dma,
+ ctx[4 + i], i);
+ dma += 8;
+ }
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
{
- int i, j;
- int last_ep_ctx = 31;
/* Fields are 32 bits wide, DMA addresses are in bytes */
int field_size = 32 / 8;
+ int i;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
- &ctx->drop_flags, (unsigned long long)dma,
- ctx->drop_flags);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
- &ctx->add_flags, (unsigned long long)dma,
- ctx->add_flags);
- dma += field_size;
- for (i = 0; i > 6; ++i) {
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->rsvd[i], (unsigned long long)dma,
- ctx->rsvd[i], i);
- dma += field_size;
- }
+ struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
xhci_dbg(xhci, "Slot Context:\n");
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
- &ctx->slot.dev_info,
- (unsigned long long)dma, ctx->slot.dev_info);
+ &slot_ctx->dev_info,
+ (unsigned long long)dma, slot_ctx->dev_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
- &ctx->slot.dev_info2,
- (unsigned long long)dma, ctx->slot.dev_info2);
+ &slot_ctx->dev_info2,
+ (unsigned long long)dma, slot_ctx->dev_info2);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
- &ctx->slot.tt_info,
- (unsigned long long)dma, ctx->slot.tt_info);
+ &slot_ctx->tt_info,
+ (unsigned long long)dma, slot_ctx->tt_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
- &ctx->slot.dev_state,
- (unsigned long long)dma, ctx->slot.dev_state);
+ &slot_ctx->dev_state,
+ (unsigned long long)dma, slot_ctx->dev_state);
dma += field_size;
- for (i = 0; i > 4; ++i) {
+ for (i = 0; i < 4; ++i) {
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->slot.reserved[i], (unsigned long long)dma,
- ctx->slot.reserved[i], i);
+ &slot_ctx->reserved[i], (unsigned long long)dma,
+ slot_ctx->reserved[i], i);
dma += field_size;
}
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
+{
+ int i, j;
+ int last_ep_ctx = 31;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
if (last_ep < 31)
last_ep_ctx = last_ep + 1;
for (i = 0; i < last_ep_ctx; ++i) {
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+ dma_addr_t dma = ctx->dma +
+ ((unsigned long)ep_ctx - (unsigned long)ctx);
+
xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
- &ctx->ep[i].ep_info,
- (unsigned long long)dma, ctx->ep[i].ep_info);
+ &ep_ctx->ep_info,
+ (unsigned long long)dma, ep_ctx->ep_info);
dma += field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
- &ctx->ep[i].ep_info2,
- (unsigned long long)dma, ctx->ep[i].ep_info2);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
- &ctx->ep[i].deq[0],
- (unsigned long long)dma, ctx->ep[i].deq[0]);
- dma += field_size;
- xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
- &ctx->ep[i].deq[1],
- (unsigned long long)dma, ctx->ep[i].deq[1]);
+ &ep_ctx->ep_info2,
+ (unsigned long long)dma, ep_ctx->ep_info2);
dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+ &ep_ctx->deq,
+ (unsigned long long)dma, ep_ctx->deq);
+ dma += 2*field_size;
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
- &ctx->ep[i].tx_info,
- (unsigned long long)dma, ctx->ep[i].tx_info);
+ &ep_ctx->tx_info,
+ (unsigned long long)dma, ep_ctx->tx_info);
dma += field_size;
for (j = 0; j < 3; ++j) {
xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
- &ctx->ep[i].reserved[j],
+ &ep_ctx->reserved[j],
(unsigned long long)dma,
- ctx->ep[i].reserved[j], j);
+ ep_ctx->reserved[j], j);
+ dma += field_size;
+ }
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
+ }
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int last_ep)
+{
+ int i;
+ /* Fields are 32 bits wide, DMA addresses are in bytes */
+ int field_size = 32 / 8;
+ struct xhci_slot_ctx *slot_ctx;
+ dma_addr_t dma = ctx->dma;
+ int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+ if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+ struct xhci_input_control_ctx *ctrl_ctx =
+ xhci_get_input_control_ctx(xhci, ctx);
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+ &ctrl_ctx->drop_flags, (unsigned long long)dma,
+ ctrl_ctx->drop_flags);
+ dma += field_size;
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+ &ctrl_ctx->add_flags, (unsigned long long)dma,
+ ctrl_ctx->add_flags);
+ dma += field_size;
+ for (i = 0; i < 6; ++i) {
+ xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+ &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+ ctrl_ctx->rsvd2[i], i);
dma += field_size;
}
+
+ if (csz)
+ dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
}
+
+ slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+ xhci_dbg_slot_ctx(xhci, ctx);
+ xhci_dbg_ep_ctx(xhci, ctx, last_ep);
}
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07ccd09..816c39caca1c 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci)
u32 state;
state = xhci_readl(xhci, &xhci->op_regs->status);
- BUG_ON((state & STS_HALT) == 0);
+ if ((state & STS_HALT) == 0) {
+ xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+ return 0;
+ }
xhci_dbg(xhci, "// Reset the HC\n");
command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@ int xhci_init(struct usb_hcd *hcd)
static void xhci_work(struct xhci_hcd *xhci)
{
u32 temp;
+ u64 temp_64;
/*
* Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@ static void xhci_work(struct xhci_hcd *xhci)
/* FIXME this should be a delayed service routine that clears the EHB */
xhci_handle_event(xhci);
- /* Clear the event handler busy flag; the event ring should be empty. */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+ /* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
/* Flush posted writes -- FIXME is this necessary? */
xhci_readl(xhci, &xhci->ir_set->irq_pending);
}
@@ -266,19 +270,34 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
u32 temp, temp2;
+ union xhci_trb *trb;
spin_lock(&xhci->lock);
+ trb = xhci->event_ring->dequeue;
/* Check if the xHC generated the interrupt, or the irq is shared */
temp = xhci_readl(xhci, &xhci->op_regs->status);
temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+ if (temp == 0xffffffff && temp2 == 0xffffffff)
+ goto hw_died;
+
if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
spin_unlock(&xhci->lock);
return IRQ_NONE;
}
+ xhci_dbg(xhci, "op reg status = %08x\n", temp);
+ xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+ xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+ xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+ (unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+ lower_32_bits(trb->link.segment_ptr),
+ upper_32_bits(trb->link.segment_ptr),
+ (unsigned int) trb->link.intr_target,
+ (unsigned int) trb->link.control);
if (temp & STS_FATAL) {
xhci_warn(xhci, "WARNING: Host System Error\n");
xhci_halt(xhci);
+hw_died:
xhci_to_hcd(xhci)->state = HC_STATE_HALT;
spin_unlock(&xhci->lock);
return -ESHUTDOWN;
@@ -295,6 +314,7 @@ void xhci_event_ring_work(unsigned long arg)
{
unsigned long flags;
int temp;
+ u64 temp_64;
struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
int i, j;
@@ -311,9 +331,9 @@ void xhci_event_ring_work(unsigned long arg)
xhci_dbg(xhci, "Event ring:\n");
xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
xhci_dbg(xhci, "Command ring:\n");
xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@ void xhci_event_ring_work(unsigned long arg)
int xhci_run(struct usb_hcd *hcd)
{
u32 temp;
+ u64 temp_64;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
void (*doorbell)(struct xhci_hcd *) = NULL;
@@ -382,6 +403,20 @@ int xhci_run(struct usb_hcd *hcd)
add_timer(&xhci->event_ring_timer);
#endif
+ xhci_dbg(xhci, "Command ring memory map follows:\n");
+ xhci_debug_ring(xhci, xhci->cmd_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+ xhci_dbg_cmd_ptrs(xhci);
+
+ xhci_dbg(xhci, "ERST memory map follows:\n");
+ xhci_dbg_erst(xhci, &xhci->erst);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
+ xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+ temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+ temp_64 &= ~ERST_PTR_MASK;
+ xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
xhci_dbg(xhci, "// Set the interrupt modulation register\n");
temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@ int xhci_run(struct usb_hcd *hcd)
if (NUM_TEST_NOOPS > 0)
doorbell = xhci_setup_one_noop(xhci);
- xhci_dbg(xhci, "Command ring memory map follows:\n");
- xhci_debug_ring(xhci, xhci->cmd_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
- xhci_dbg_cmd_ptrs(xhci);
-
- xhci_dbg(xhci, "ERST memory map follows:\n");
- xhci_dbg_erst(xhci, &xhci->erst);
- xhci_dbg(xhci, "Event ring:\n");
- xhci_debug_ring(xhci, xhci->event_ring);
- xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
- temp &= ERST_PTR_MASK;
- xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
- xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
temp = xhci_readl(xhci, &xhci->op_regs->command);
temp |= (CMD_RUN);
xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
goto exit;
}
if (usb_endpoint_xfer_control(&urb->ep->desc))
- ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+ /* We have a spinlock and interrupts disabled, so we must pass
+ * atomic context to this function, which may allocate memory.
+ */
+ ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
- ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+ ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
slot_id, ep_index);
else
ret = -EINVAL;
@@ -661,8 +683,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
goto done;
xhci_dbg(xhci, "Cancel URB %p\n", urb);
+ xhci_dbg(xhci, "Event ring:\n");
+ xhci_debug_ring(xhci, xhci->event_ring);
ep_index = xhci_get_endpoint_index(&urb->ep->desc);
ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+ xhci_dbg(xhci, "Endpoint ring:\n");
+ xhci_debug_ring(xhci, ep_ring);
td = (struct xhci_td *) urb->hcpriv;
ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
unsigned int last_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HC already knows the endpoint is disabled,
* or the HCD has noted it is disabled, ignore this request
*/
if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
- in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
__func__, ep);
return 0;
}
- in_ctx->drop_flags |= drop_flag;
- new_drop_flags = in_ctx->drop_flags;
+ ctrl_ctx->drop_flags |= drop_flag;
+ new_drop_flags = ctrl_ctx->drop_flags;
- in_ctx->add_flags = ~drop_flag;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags = ~drop_flag;
+ new_add_flags = ctrl_ctx->add_flags;
- last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+ last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we deleted the last one */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
@@ -778,17 +809,22 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct xhci_device_control *in_ctx;
+ struct xhci_container_ctx *in_ctx, *out_ctx;
unsigned int ep_index;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
u32 added_ctxs;
unsigned int last_ctx;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, __func__);
- if (ret <= 0)
+ if (ret <= 0) {
+ /* So we won't queue a reset ep command for a root hub */
+ ep->hcpriv = NULL;
return ret;
+ }
xhci = hcd_to_xhci(hcd);
added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
}
in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+ out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
/* If the HCD has already noted the endpoint is enabled,
* ignore this request.
*/
- if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+ if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
__func__, ep);
return 0;
@@ -833,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return -ENOMEM;
}
- in_ctx->add_flags |= added_ctxs;
- new_add_flags = in_ctx->add_flags;
+ ctrl_ctx->add_flags |= added_ctxs;
+ new_add_flags = ctrl_ctx->add_flags;
/* If xhci_endpoint_disable() was called for this endpoint, but the
* xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
* descriptors. We must drop and re-add this endpoint, so we leave the
* drop flags alone.
*/
- new_drop_flags = in_ctx->drop_flags;
+ new_drop_flags = ctrl_ctx->drop_flags;
+ slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
/* Update the last valid endpoint context, if we just added one past */
- if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
- in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
- in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+ if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
+ slot_ctx->dev_info |= LAST_CTX(last_ctx);
}
- new_slot_info = in_ctx->slot.dev_info;
+ new_slot_info = slot_ctx->dev_info;
+
+ /* Store the usb_device pointer for later use */
+ ep->hcpriv = udev;
xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
return 0;
}
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
{
+ struct xhci_input_control_ctx *ctrl_ctx;
struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
int i;
/* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
* untouched. Make sure we don't leave any old state in the input
* endpoint contexts.
*/
- virt_dev->in_ctx->drop_flags = 0;
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->drop_flags = 0;
+ ctrl_ctx->add_flags = 0;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ slot_ctx->dev_info &= ~LAST_CTX_MASK;
/* Endpoint 0 is always valid */
- virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
for (i = 1; i < 31; ++i) {
- ep_ctx = &virt_dev->in_ctx->ep[i];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
}
}
@@ -903,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
unsigned long flags;
struct xhci_hcd *xhci;
struct xhci_virt_device *virt_dev;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ struct xhci_slot_ctx *slot_ctx;
ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
if (ret <= 0)
@@ -918,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev = xhci->devs[udev->slot_id];
/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
- virt_dev->in_ctx->add_flags |= SLOT_FLAG;
- virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
- virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
- virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags |= SLOT_FLAG;
+ ctrl_ctx->add_flags &= ~EP0_FLAG;
+ ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+ ctrl_ctx->drop_flags &= ~EP0_FLAG;
xhci_dbg(xhci, "New Input Control Context:\n");
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+ ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
udev->slot_id);
if (ret < 0) {
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
}
xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
- LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+ LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
/* Free any old rings */
for (i = 1; i < 31; ++i) {
if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
virt_dev->new_ep_rings[i] = NULL;
}
}
- xhci_zero_in_ctx(virt_dev);
+ xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints. The core should have sent the control message
+ * to clear the halt condition. However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct xhci_hcd *xhci;
+ struct usb_device *udev;
+ unsigned int ep_index;
+ unsigned long flags;
+ int ret;
+ struct xhci_dequeue_state deq_state;
+ struct xhci_ring *ep_ring;
+
+ xhci = hcd_to_xhci(hcd);
+ udev = (struct usb_device *) ep->hcpriv;
+ /* Called with a root hub endpoint (or an endpoint that wasn't added
+ * with xhci_add_endpoint()
+ */
+ if (!ep->hcpriv)
+ return;
+ ep_index = xhci_get_endpoint_index(&ep->desc);
+ ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+ if (!ep_ring->stopped_td) {
+ xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+ ep->desc.bEndpointAddress);
+ return;
+ }
+
+ xhci_dbg(xhci, "Queueing reset endpoint command\n");
+ spin_lock_irqsave(&xhci->lock, flags);
+ ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+ /*
+ * Can't change the ring dequeue pointer until it's transitioned to the
+ * stopped state, which is only upon a successful reset endpoint
+ * command. Better hope that last command worked!
+ */
+ if (!ret) {
+ xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+ /* We need to move the HW's dequeue pointer past this TD,
+ * or it will attempt to resend it on the next doorbell ring.
+ */
+ xhci_find_new_dequeue_state(xhci, udev->slot_id,
+ ep_index, ep_ring->stopped_td, &deq_state);
+ xhci_dbg(xhci, "Queueing new dequeue state\n");
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ udev->slot_id,
+ ep_index, &deq_state);
+ kfree(ep_ring->stopped_td);
+ xhci_ring_cmd_db(xhci);
+ }
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (ret)
+ xhci_warn(xhci, "FIXME allocate a new ring segment\n");
}
/*
@@ -1120,7 +1229,9 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_virt_device *virt_dev;
int ret = 0;
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- u32 temp;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
+ u64 temp_64;
if (!udev->slot_id) {
xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
if (!udev->config)
xhci_setup_addressable_virt_dev(xhci, udev);
/* Otherwise, assume the core has the device configured how it wants */
+ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
- udev->slot_id);
+ ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+ udev->slot_id);
if (ret) {
spin_unlock_irqrestore(&xhci->lock, flags);
xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
default:
xhci_err(xhci, "ERROR: unexpected command completion "
"code 0x%x.\n", virt_dev->cmd_status);
+ xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
ret = -EINVAL;
break;
}
if (ret) {
return ret;
}
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
- temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
- xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
- udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
- xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+ temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+ xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+ xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
udev->slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
- xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+ &xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+ (unsigned long long)
+ xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
- (unsigned long long)virt_dev->out_ctx_dma);
+ (unsigned long long)virt_dev->out_ctx->dma);
xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
- xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+ xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
/*
* USB core uses address 1 for the roothubs, so we add one to the
* address given back to us by the HC.
*/
- udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+ udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
/* Zero the input context control for later use */
- virt_dev->in_ctx->add_flags = 0;
- virt_dev->in_ctx->drop_flags = 0;
- /* Mirror flags in the output context for future ep enable/disable */
- virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
- virt_dev->out_ctx->drop_flags = 0;
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+ ctrl_ctx->add_flags = 0;
+ ctrl_ctx->drop_flags = 0;
xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
/* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@ static int __init xhci_hcd_init(void)
/* xhci_device_control has eight fields, and also
* embeds one xhci_slot_ctx and 31 xhci_ep_ctx
*/
- BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c8a72de1c508..e6b9a1c6002d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -88,7 +88,7 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
return;
prev->next = next;
if (link_trbs) {
- prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+ prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
@@ -189,6 +189,63 @@ fail:
return 0;
}
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+ int type, gfp_t flags)
+{
+ struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+ if (!ctx)
+ return NULL;
+
+ BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+ ctx->type = type;
+ ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+ if (type == XHCI_CTX_TYPE_INPUT)
+ ctx->size += CTX_SIZE(xhci->hcc_params);
+
+ ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+ memset(ctx->bytes, 0, ctx->size);
+ return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+ kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+ return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx)
+{
+ if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+ return (struct xhci_slot_ctx *)ctx->bytes;
+
+ return (struct xhci_slot_ctx *)
+ (ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+ struct xhci_container_ctx *ctx,
+ unsigned int ep_index)
+{
+ /* increment ep index by offset of start of ep ctx array */
+ ep_index++;
+ if (ctx->type == XHCI_CTX_TYPE_INPUT)
+ ep_index++;
+
+ return (struct xhci_ep_ctx *)
+ (ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
/* All the xhci_tds in the ring's TD list should be freed at this point */
void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
{
@@ -200,8 +257,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
return;
dev = xhci->devs[slot_id];
- xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
if (!dev)
return;
@@ -210,11 +266,10 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
xhci_ring_free(xhci, dev->ep_rings[i]);
if (dev->in_ctx)
- dma_pool_free(xhci->device_pool,
- dev->in_ctx, dev->in_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->in_ctx);
if (dev->out_ctx)
- dma_pool_free(xhci->device_pool,
- dev->out_ctx, dev->out_ctx_dma);
+ xhci_free_container_ctx(xhci, dev->out_ctx);
+
kfree(xhci->devs[slot_id]);
xhci->devs[slot_id] = 0;
}
@@ -222,7 +277,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
struct usb_device *udev, gfp_t flags)
{
- dma_addr_t dma;
struct xhci_virt_device *dev;
/* Slot ID 0 is reserved */
@@ -236,23 +290,21 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
return 0;
dev = xhci->devs[slot_id];
- /* Allocate the (output) device context that will be used in the HC */
- dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ /* Allocate the (output) device context that will be used in the HC. */
+ dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
if (!dev->out_ctx)
goto fail;
- dev->out_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+ (unsigned long long)dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
- dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+ dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
- dev->in_ctx_dma = dma;
+
xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dma);
- memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+ (unsigned long long)dev->in_ctx->dma);
/* Allocate endpoint 0 ring */
dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
@@ -261,17 +313,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
init_completion(&dev->cmd_completion);
- /*
- * Point to output device context in dcbaa; skip the output control
- * context, which is eight 32 bit fields (or 32 bytes long)
- */
- xhci->dcbaa->dev_context_ptrs[2*slot_id] =
- (u32) dev->out_ctx_dma + (32);
+ /* Point to output device context in dcbaa. */
+ xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
slot_id,
- &xhci->dcbaa->dev_context_ptrs[2*slot_id],
- (unsigned long long)dev->out_ctx_dma);
- xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+ &xhci->dcbaa->dev_context_ptrs[slot_id],
+ (unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
return 1;
fail:
@@ -285,6 +332,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
struct xhci_virt_device *dev;
struct xhci_ep_ctx *ep0_ctx;
struct usb_device *top_dev;
+ struct xhci_slot_ctx *slot_ctx;
+ struct xhci_input_control_ctx *ctrl_ctx;
dev = xhci->devs[udev->slot_id];
/* Slot ID 0 is reserved */
@@ -293,27 +342,29 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
udev->slot_id);
return -EINVAL;
}
- ep0_ctx = &dev->in_ctx->ep[0];
+ ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+ ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
/* 2) New slot context and endpoint 0 context are valid*/
- dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+ ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
/* 3) Only the control endpoint is valid - one endpoint context */
- dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+ slot_ctx->dev_info |= LAST_CTX(1);
switch (udev->speed) {
case USB_SPEED_SUPER:
- dev->in_ctx->slot.dev_info |= (u32) udev->route;
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+ slot_ctx->dev_info |= (u32) udev->route;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
break;
case USB_SPEED_HIGH:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
break;
case USB_SPEED_FULL:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
break;
case USB_SPEED_LOW:
- dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+ slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
break;
case USB_SPEED_VARIABLE:
xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -327,7 +378,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
top_dev = top_dev->parent)
/* Found device below root hub */;
- dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+ slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
/* Is this a LS/FS device under a HS hub? */
@@ -337,8 +388,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
*/
if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
udev->tt) {
- dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
- dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+ slot_ctx->tt_info = udev->tt->hub->slot_id;
+ slot_ctx->tt_info |= udev->ttport << 8;
}
xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -360,10 +411,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
ep0_ctx->ep_info2 |= MAX_BURST(0);
ep0_ctx->ep_info2 |= ERROR_COUNT(3);
- ep0_ctx->deq[0] =
+ ep0_ctx->deq =
dev->ep_rings[0]->first_seg->dma;
- ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
- ep0_ctx->deq[1] = 0;
+ ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
@@ -470,25 +520,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
unsigned int max_burst;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
/* Set up the endpoint ring */
virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
if (!virt_dev->new_ep_rings[ep_index])
return -ENOMEM;
ep_ring = virt_dev->new_ep_rings[ep_index];
- ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
/* FIXME dig Mult and streams info out of ep companion desc */
- /* Allow 3 retries for everything but isoc */
+ /* Allow 3 retries for everything but isoc;
+ * error count = 0 means infinite retries.
+ */
if (!usb_endpoint_xfer_isoc(&ep->desc))
ep_ctx->ep_info2 = ERROR_COUNT(3);
else
- ep_ctx->ep_info2 = ERROR_COUNT(0);
+ ep_ctx->ep_info2 = ERROR_COUNT(1);
ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
@@ -498,7 +549,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
max_packet = ep->desc.wMaxPacketSize;
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ if (!ep->ss_ep_comp) {
+ xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+ max_packet = 0;
+ } else {
+ max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+ }
ep_ctx->ep_info2 |= MAX_BURST(max_packet);
break;
case USB_SPEED_HIGH:
@@ -531,18 +587,114 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
struct xhci_ep_ctx *ep_ctx;
ep_index = xhci_get_endpoint_index(&ep->desc);
- ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
ep_ctx->ep_info = 0;
ep_ctx->ep_info2 = 0;
- ep_ctx->deq[0] = 0;
- ep_ctx->deq[1] = 0;
+ ep_ctx->deq = 0;
ep_ctx->tx_info = 0;
/* Don't free the endpoint ring until the set interface or configuration
* request succeeds.
*/
}
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+ int i;
+ struct device *dev = xhci_to_hcd(xhci)->self.controller;
+ int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+ if (!num_sp)
+ return 0;
+
+ xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+ if (!xhci->scratchpad)
+ goto fail_sp;
+
+ xhci->scratchpad->sp_array =
+ pci_alloc_consistent(to_pci_dev(dev),
+ num_sp * sizeof(u64),
+ &xhci->scratchpad->sp_dma);
+ if (!xhci->scratchpad->sp_array)
+ goto fail_sp2;
+
+ xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+ if (!xhci->scratchpad->sp_buffers)
+ goto fail_sp3;
+
+ xhci->scratchpad->sp_dma_buffers =
+ kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+ if (!xhci->scratchpad->sp_dma_buffers)
+ goto fail_sp4;
+
+ xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+ for (i = 0; i < num_sp; i++) {
+ dma_addr_t dma;
+ void *buf = pci_alloc_consistent(to_pci_dev(dev),
+ xhci->page_size, &dma);
+ if (!buf)
+ goto fail_sp5;
+
+ xhci->scratchpad->sp_array[i] = dma;
+ xhci->scratchpad->sp_buffers[i] = buf;
+ xhci->scratchpad->sp_dma_buffers[i] = dma;
+ }
+
+ return 0;
+
+ fail_sp5:
+ for (i = i - 1; i >= 0; i--) {
+ pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+ kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+ pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+
+ fail_sp:
+ return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+ int num_sp;
+ int i;
+ struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+ if (!xhci->scratchpad)
+ return;
+
+ num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+ for (i = 0; i < num_sp; i++) {
+ pci_free_consistent(pdev, xhci->page_size,
+ xhci->scratchpad->sp_buffers[i],
+ xhci->scratchpad->sp_dma_buffers[i]);
+ }
+ kfree(xhci->scratchpad->sp_dma_buffers);
+ kfree(xhci->scratchpad->sp_buffers);
+ pci_free_consistent(pdev, num_sp * sizeof(u64),
+ xhci->scratchpad->sp_array,
+ xhci->scratchpad->sp_dma);
+ kfree(xhci->scratchpad);
+ xhci->scratchpad = NULL;
+}
+
void xhci_mem_cleanup(struct xhci_hcd *xhci)
{
struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
@@ -551,10 +703,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
/* Free the Event Ring Segment Table and the actual Event Ring */
xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+ xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
if (xhci->erst.entries)
pci_free_consistent(pdev, size,
@@ -566,8 +716,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->event_ring = NULL;
xhci_dbg(xhci, "Freed event ring\n");
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
if (xhci->cmd_ring)
xhci_ring_free(xhci, xhci->cmd_ring);
xhci->cmd_ring = NULL;
@@ -586,8 +735,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->device_pool = NULL;
xhci_dbg(xhci, "Freed device context pool\n");
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
if (xhci->dcbaa)
pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
xhci->dcbaa, xhci->dcbaa->dma);
@@ -595,6 +743,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->page_size = 0;
xhci->page_shift = 0;
+ scratchpad_free(xhci);
}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
@@ -602,6 +751,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
dma_addr_t dma;
struct device *dev = xhci_to_hcd(xhci)->self.controller;
unsigned int val, val2;
+ u64 val_64;
struct xhci_segment *seg;
u32 page_size;
int i;
@@ -647,8 +797,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->dcbaa->dma = dma;
xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
- xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+ xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
* Initialize the ring segment pool. The ring must be a contiguous
@@ -658,11 +807,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
*/
xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
SEGMENT_SIZE, 64, xhci->page_size);
+
/* See Table 46 and Note on Figure 55 */
- /* FIXME support 64-byte contexts */
xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
- sizeof(struct xhci_device_control),
- 64, xhci->page_size);
+ 2112, 64, xhci->page_size);
if (!xhci->segment_pool || !xhci->device_pool)
goto fail;
@@ -675,14 +823,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
(unsigned long long)xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
- val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
- val = (val & ~CMD_RING_ADDR_MASK) |
- (xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+ val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+ val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+ (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
xhci->cmd_ring->cycle_state;
- xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
- xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
- xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
- xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+ xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+ xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
xhci_dbg_cmd_ptrs(xhci);
val = xhci_readl(xhci, &xhci->cap_regs->db_off);
@@ -722,8 +868,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
/* set ring base address and size for each segment table entry */
for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
struct xhci_erst_entry *entry = &xhci->erst.entries[val];
- entry->seg_addr[0] = seg->dma;
- entry->seg_addr[1] = 0;
+ entry->seg_addr = seg->dma;
entry->seg_size = TRBS_PER_SEGMENT;
entry->rsvd = 0;
seg = seg->next;
@@ -741,11 +886,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
/* set the segment table base address */
xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
(unsigned long long)xhci->erst.erst_dma_addr);
- val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
- val &= ERST_PTR_MASK;
- val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
- xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
- xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+ val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+ val_64 &= ERST_PTR_MASK;
+ val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+ xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
/* Set the event ring dequeue address */
xhci_set_hc_event_deq(xhci);
@@ -761,7 +905,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
for (i = 0; i < MAX_HC_SLOTS; ++i)
xhci->devs[i] = 0;
+ if (scratchpad_alloc(xhci, flags))
+ goto fail;
+
return 0;
+
fail:
xhci_warn(xhci, "Couldn't initialize memory\n");
xhci_mem_cleanup(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1462709e26c0..592fe7e623f7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -117,6 +117,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
.free_dev = xhci_free_dev,
.add_endpoint = xhci_add_endpoint,
.drop_endpoint = xhci_drop_endpoint,
+ .endpoint_reset = xhci_endpoint_reset,
.check_bandwidth = xhci_check_bandwidth,
.reset_bandwidth = xhci_reset_bandwidth,
.address_device = xhci_address_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 02d81985c454..aa88a067148b 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -135,6 +135,7 @@ static void next_trb(struct xhci_hcd *xhci,
static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
{
union xhci_trb *next = ++(ring->dequeue);
+ unsigned long long addr;
ring->deq_updates++;
/* Update the dequeue pointer further if that was a link TRB or we're at
@@ -152,6 +153,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
ring->dequeue = ring->deq_seg->trbs;
next = ring->dequeue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
}
/*
@@ -171,6 +179,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
{
u32 chain;
union xhci_trb *next;
+ unsigned long long addr;
chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
next = ++(ring->enqueue);
@@ -204,6 +213,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
ring->enqueue = ring->enq_seg->trbs;
next = ring->enqueue;
}
+ addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+ if (ring == xhci->event_ring)
+ xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+ else if (ring == xhci->cmd_ring)
+ xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+ else
+ xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
}
/*
@@ -237,7 +253,7 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
{
- u32 temp;
+ u64 temp;
dma_addr_t deq;
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -246,13 +262,15 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
xhci_warn(xhci, "WARN something wrong with SW event ring "
"dequeue ptr.\n");
/* Update HC event ring dequeue pointer */
- temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+ temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
temp &= ERST_PTR_MASK;
- if (!in_interrupt())
- xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
- xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
- xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
- &xhci->ir_set->erst_dequeue[0]);
+ /* Don't clear the EHB bit (which is RW1C) because
+ * there might be more events to service.
+ */
+ temp &= ~ERST_EHB;
+ xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+ xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+ &xhci->ir_set->erst_dequeue);
}
/* Ring the host controller doorbell after placing a command on the ring */
@@ -279,7 +297,8 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
/* Don't ring the doorbell for this endpoint if there are pending
* cancellations because the we don't want to interrupt processing.
*/
- if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+ if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+ && !(ep_ring->state & EP_HALTED)) {
field = xhci_readl(xhci, db_addr) & DB_MASK;
xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -316,12 +335,6 @@ static struct xhci_segment *find_trb_seg(
return cur_seg;
}
-struct dequeue_state {
- struct xhci_segment *new_deq_seg;
- union xhci_trb *new_deq_ptr;
- int new_cycle_state;
-};
-
/*
* Move the xHC's endpoint ring dequeue pointer past cur_td.
* Record the new state of the xHC's endpoint ring dequeue segment,
@@ -336,24 +349,30 @@ struct dequeue_state {
* - Finally we move the dequeue state one TRB further, toggling the cycle bit
* if we've moved it past a link TRB with the toggle cycle bit set.
*/
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
unsigned int slot_id, unsigned int ep_index,
- struct xhci_td *cur_td, struct dequeue_state *state)
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state)
{
struct xhci_virt_device *dev = xhci->devs[slot_id];
struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
struct xhci_generic_trb *trb;
+ struct xhci_ep_ctx *ep_ctx;
+ dma_addr_t addr;
state->new_cycle_state = 0;
+ xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
state->new_deq_seg = find_trb_seg(cur_td->start_seg,
ep_ring->stopped_trb,
&state->new_cycle_state);
if (!state->new_deq_seg)
BUG();
/* Dig out the cycle state saved by the xHC during the stop ep cmd */
- state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+ xhci_dbg(xhci, "Finding endpoint context\n");
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ state->new_cycle_state = 0x1 & ep_ctx->deq;
state->new_deq_ptr = cur_td->last_trb;
+ xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
state->new_deq_seg = find_trb_seg(state->new_deq_seg,
state->new_deq_ptr,
&state->new_cycle_state);
@@ -367,6 +386,12 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci,
next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
/* Don't update the ring cycle state for the producer (us). */
+ xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+ state->new_deq_seg);
+ addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+ xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+ (unsigned long long) addr);
+ xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
ep_ring->dequeue = state->new_deq_ptr;
ep_ring->deq_seg = state->new_deq_seg;
}
@@ -416,6 +441,30 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
unsigned int ep_index, struct xhci_segment *deq_seg,
union xhci_trb *deq_ptr, u32 cycle_state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+ xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+ "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+ deq_state->new_deq_seg,
+ (unsigned long long)deq_state->new_deq_seg->dma,
+ deq_state->new_deq_ptr,
+ (unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+ deq_state->new_cycle_state);
+ queue_set_tr_deq(xhci, slot_id, ep_index,
+ deq_state->new_deq_seg,
+ deq_state->new_deq_ptr,
+ (u32) deq_state->new_cycle_state);
+ /* Stop the TD queueing code from ringing the doorbell until
+ * this command completes. The HC won't set the dequeue pointer
+ * if the ring is running, and ringing the doorbell starts the
+ * ring running.
+ */
+ ep_ring->state |= SET_DEQ_PENDING;
+ xhci_ring_cmd_db(xhci);
+}
+
/*
* When we get a command completion for a Stop Endpoint Command, we need to
* unlink any cancelled TDs from the ring. There are two ways to do that:
@@ -436,7 +485,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
struct xhci_td *cur_td = 0;
struct xhci_td *last_unlinked_td;
- struct dequeue_state deq_state;
+ struct xhci_dequeue_state deq_state;
#ifdef CONFIG_USB_HCD_STAT
ktime_t stop_time = ktime_get();
#endif
@@ -464,7 +513,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
* move the xHC endpoint ring dequeue pointer past this TD.
*/
if (cur_td == ep_ring->stopped_td)
- find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+ xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
&deq_state);
else
td_to_noop(xhci, ep_ring, cur_td);
@@ -480,24 +529,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
- xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
- "new deq ptr = %p (0x%llx dma), new cycle = %u\n",
- deq_state.new_deq_seg,
- (unsigned long long)deq_state.new_deq_seg->dma,
- deq_state.new_deq_ptr,
- (unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
- deq_state.new_cycle_state);
- queue_set_tr_deq(xhci, slot_id, ep_index,
- deq_state.new_deq_seg,
- deq_state.new_deq_ptr,
- (u32) deq_state.new_cycle_state);
- /* Stop the TD queueing code from ringing the doorbell until
- * this command completes. The HC won't set the dequeue pointer
- * if the ring is running, and ringing the doorbell starts the
- * ring running.
- */
- ep_ring->state |= SET_DEQ_PENDING;
- xhci_ring_cmd_db(xhci);
+ xhci_queue_new_dequeue_state(xhci, ep_ring,
+ slot_id, ep_index, &deq_state);
} else {
/* Otherwise just ring the doorbell to restart the ring */
ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -551,11 +584,15 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
unsigned int ep_index;
struct xhci_ring *ep_ring;
struct xhci_virt_device *dev;
+ struct xhci_ep_ctx *ep_ctx;
+ struct xhci_slot_ctx *slot_ctx;
slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
dev = xhci->devs[slot_id];
ep_ring = dev->ep_rings[ep_index];
+ ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+ slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
unsigned int ep_state;
@@ -569,9 +606,9 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
case COMP_CTX_STATE:
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
"to incorrect slot or ep state.\n");
- ep_state = dev->out_ctx->ep[ep_index].ep_info;
+ ep_state = ep_ctx->ep_info;
ep_state &= EP_STATE_MASK;
- slot_state = dev->out_ctx->slot.dev_state;
+ slot_state = slot_ctx->dev_state;
slot_state = GET_SLOT_STATE(slot_state);
xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
slot_state, ep_state);
@@ -593,16 +630,33 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
* cancelling URBs, which might not be an error...
*/
} else {
- xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
- "deq[1] = 0x%x.\n",
- dev->out_ctx->ep[ep_index].deq[0],
- dev->out_ctx->ep[ep_index].deq[1]);
+ xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+ ep_ctx->deq);
}
ep_ring->state &= ~SET_DEQ_PENDING;
ring_ep_doorbell(xhci, slot_id, ep_index);
}
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+ struct xhci_event_cmd *event,
+ union xhci_trb *trb)
+{
+ int slot_id;
+ unsigned int ep_index;
+
+ slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+ ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+ /* This command will only fail if the endpoint wasn't halted,
+ * but we don't care.
+ */
+ xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+ (unsigned int) GET_COMP_CODE(event->status));
+
+ /* Clear our internal halted state and restart the ring */
+ xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+ ring_ep_doorbell(xhci, slot_id, ep_index);
+}
static void handle_cmd_completion(struct xhci_hcd *xhci,
struct xhci_event_cmd *event)
@@ -611,7 +665,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
u64 cmd_dma;
dma_addr_t cmd_dequeue_dma;
- cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+ cmd_dma = event->cmd_trb;
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
xhci->cmd_ring->dequeue);
/* Is the command ring deq ptr out of sync with the deq seg ptr? */
@@ -653,6 +707,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
case TRB_TYPE(TRB_CMD_NOOP):
++xhci->noops_handled;
break;
+ case TRB_TYPE(TRB_RESET_EP):
+ handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+ break;
default:
/* Skip over unknown commands on the event ring */
xhci->error_bitmask |= 1 << 6;
@@ -756,7 +813,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
union xhci_trb *event_trb;
struct urb *urb = 0;
int status = -EINPROGRESS;
+ struct xhci_ep_ctx *ep_ctx;
+ xhci_dbg(xhci, "In %s\n", __func__);
xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
if (!xdev) {
xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
@@ -765,17 +824,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
/* Endpoint ID is 1 based, our index is zero based */
ep_index = TRB_TO_EP_ID(event->flags) - 1;
+ xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
ep_ring = xdev->ep_rings[ep_index];
- if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+ ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+ if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
return -ENODEV;
}
- event_dma = event->buffer[0];
- if (event->buffer[1] != 0)
- xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+ event_dma = event->buffer;
/* This TRB should be in the TD at the head of this ring's TD list */
+ xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
if (list_empty(&ep_ring->td_list)) {
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -785,11 +844,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
urb = NULL;
goto cleanup;
}
+ xhci_dbg(xhci, "%s - getting list entry\n", __func__);
td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
/* Is this a TRB in the currently executing TD? */
+ xhci_dbg(xhci, "%s - looking for TD\n", __func__);
event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
td->last_trb, event_dma);
+ xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
if (!event_seg) {
/* HC is busted, give up! */
xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
@@ -798,10 +860,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
- xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[0]);
- xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
- (unsigned int) event->buffer[1]);
+ xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+ lower_32_bits(event->buffer));
+ xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+ upper_32_bits(event->buffer));
xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
(unsigned int) event->transfer_len);
xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
@@ -823,6 +885,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
break;
case COMP_STALL:
xhci_warn(xhci, "WARN: Stalled endpoint\n");
+ ep_ring->state |= EP_HALTED;
status = -EPIPE;
break;
case COMP_TRB_ERR:
@@ -833,6 +896,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
xhci_warn(xhci, "WARN: transfer error on endpoint\n");
status = -EPROTO;
break;
+ case COMP_BABBLE:
+ xhci_warn(xhci, "WARN: babble error on endpoint\n");
+ status = -EOVERFLOW;
+ break;
case COMP_DB_ERR:
xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
status = -ENOSR;
@@ -874,15 +941,26 @@ static int handle_tx_event(struct xhci_hcd *xhci,
if (event_trb != ep_ring->dequeue) {
/* The event was for the status stage */
if (event_trb == td->last_trb) {
- td->urb->actual_length =
- td->urb->transfer_buffer_length;
+ if (td->urb->actual_length != 0) {
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS || status == 0)
+ /* Did we already see a short data stage? */
+ status = -EREMOTEIO;
+ } else {
+ td->urb->actual_length =
+ td->urb->transfer_buffer_length;
+ }
} else {
/* Maybe the event was for the data stage? */
- if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
/* We didn't stop on a link TRB in the middle */
td->urb->actual_length =
td->urb->transfer_buffer_length -
TRB_LEN(event->transfer_len);
+ xhci_dbg(xhci, "Waiting for status stage event\n");
+ urb = NULL;
+ goto cleanup;
+ }
}
}
} else {
@@ -929,16 +1007,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
TRB_LEN(event->transfer_len));
td->urb->actual_length = 0;
}
- if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
- status = -EREMOTEIO;
- else
- status = 0;
+ /* Don't overwrite a previously set error code */
+ if (status == -EINPROGRESS) {
+ if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+ status = -EREMOTEIO;
+ else
+ status = 0;
+ }
} else {
td->urb->actual_length = td->urb->transfer_buffer_length;
/* Ignore a short packet completion if the
* untransferred length was zero.
*/
- status = 0;
+ if (status == -EREMOTEIO)
+ status = 0;
}
} else {
/* Slow path - walk the list, starting from the dequeue
@@ -965,19 +1047,30 @@ static int handle_tx_event(struct xhci_hcd *xhci,
TRB_LEN(event->transfer_len);
}
}
- /* The Endpoint Stop Command completion will take care of
- * any stopped TDs. A stopped TD may be restarted, so don't update the
- * ring dequeue pointer or take this TD off any lists yet.
- */
if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+ /* The Endpoint Stop Command completion will take care of any
+ * stopped TDs. A stopped TD may be restarted, so don't update
+ * the ring dequeue pointer or take this TD off any lists yet.
+ */
ep_ring->stopped_td = td;
ep_ring->stopped_trb = event_trb;
} else {
- /* Update ring dequeue pointer */
- while (ep_ring->dequeue != td->last_trb)
+ if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+ /* The transfer is completed from the driver's
+ * perspective, but we need to issue a set dequeue
+ * command for this stalled endpoint to move the dequeue
+ * pointer past the TD. We can't do that here because
+ * the halt condition must be cleared first.
+ */
+ ep_ring->stopped_td = td;
+ ep_ring->stopped_trb = event_trb;
+ } else {
+ /* Update ring dequeue pointer */
+ while (ep_ring->dequeue != td->last_trb)
+ inc_deq(xhci, ep_ring, false);
inc_deq(xhci, ep_ring, false);
- inc_deq(xhci, ep_ring, false);
+ }
/* Clean up the endpoint's TD list */
urb = td->urb;
@@ -987,7 +1080,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
list_del(&td->cancelled_td_list);
ep_ring->cancels_pending--;
}
- kfree(td);
+ /* Leave the TD around for the reset endpoint function to use */
+ if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+ kfree(td);
+ }
urb->hcpriv = NULL;
}
cleanup:
@@ -997,6 +1093,8 @@ cleanup:
/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
if (urb) {
usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+ xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+ urb, td->urb->actual_length, status);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
spin_lock(&xhci->lock);
@@ -1014,6 +1112,7 @@ void xhci_handle_event(struct xhci_hcd *xhci)
int update_ptrs = 1;
int ret;
+ xhci_dbg(xhci, "In %s\n", __func__);
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
xhci->error_bitmask |= 1 << 1;
return;
@@ -1026,18 +1125,25 @@ void xhci_handle_event(struct xhci_hcd *xhci)
xhci->error_bitmask |= 1 << 2;
return;
}
+ xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
/* FIXME: Handle more event types. */
switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
case TRB_TYPE(TRB_COMPLETION):
+ xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
handle_cmd_completion(xhci, &event->event_cmd);
+ xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
break;
case TRB_TYPE(TRB_PORT_STATUS):
+ xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
handle_port_status(xhci, event);
+ xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
update_ptrs = 0;
break;
case TRB_TYPE(TRB_TRANSFER):
+ xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
ret = handle_tx_event(xhci, &event->trans_event);
+ xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
if (ret < 0)
xhci->error_bitmask |= 1 << 9;
else
@@ -1093,13 +1199,13 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
*/
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
return -ENOENT;
- case EP_STATE_HALTED:
case EP_STATE_ERROR:
- xhci_warn(xhci, "WARN waiting for halt or error on ep "
- "to be cleared\n");
+ xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
/* FIXME event handling code for error needs to clear it */
/* XXX not sure if this should be -ENOENT or not */
return -EINVAL;
+ case EP_STATE_HALTED:
+ xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
case EP_STATE_STOPPED:
case EP_STATE_RUNNING:
break;
@@ -1128,9 +1234,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
gfp_t mem_flags)
{
int ret;
-
+ struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
- xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+ ep_ctx->ep_info & EP_STATE_MASK,
num_trbs, mem_flags);
if (ret)
return ret;
@@ -1285,6 +1391,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* Queue the first TRB, even if it's zero-length */
do {
u32 field = 0;
+ u32 length_field = 0;
/* Don't change the cycle bit of the first TRB until later */
if (first_trb)
@@ -1314,10 +1421,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
(unsigned int) addr + trb_buff_len);
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
@@ -1365,7 +1475,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct xhci_generic_trb *start_trb;
bool first_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
int running_total, trb_buff_len, ret;
u64 addr;
@@ -1443,10 +1553,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
}
+ length_field = TRB_LEN(trb_buff_len) |
+ TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+ TRB_INTR_TARGET(0);
queue_trb(xhci, ep_ring, false,
- (u32) addr,
- (u32) ((u64) addr >> 32),
- TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+ lower_32_bits(addr),
+ upper_32_bits(addr),
+ length_field,
/* We always want to know if the TRB was short,
* or we won't get an event when it completes.
* (Unless we use event data TRBs, which are a
@@ -1478,7 +1591,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
struct usb_ctrlrequest *setup;
struct xhci_generic_trb *start_trb;
int start_cycle;
- u32 field;
+ u32 field, length_field;
struct xhci_td *td;
ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
@@ -1528,13 +1641,16 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
/* If there's data, queue data TRBs */
field = 0;
+ length_field = TRB_LEN(urb->transfer_buffer_length) |
+ TD_REMAINDER(urb->transfer_buffer_length) |
+ TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_DIR_IN;
queue_trb(xhci, ep_ring, false,
lower_32_bits(urb->transfer_dma),
upper_32_bits(urb->transfer_dma),
- TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+ length_field,
/* Event on short tx */
field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
}
@@ -1603,7 +1719,8 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
}
@@ -1611,7 +1728,8 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id)
{
- return queue_command(xhci, in_ctx_ptr, 0, 0,
+ return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+ upper_32_bits(in_ctx_ptr), 0,
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
}
@@ -1639,10 +1757,23 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
u32 type = TRB_TYPE(TRB_SET_DEQ);
addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
- if (addr == 0)
+ if (addr == 0) {
xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
deq_seg, deq_ptr);
- return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+ return 0;
+ }
+ return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+ upper_32_bits(addr), 0,
trb_slot_id | trb_ep_index | type);
}
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index)
+{
+ u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+ u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+ u32 type = TRB_TYPE(TRB_RESET_EP);
+
+ return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8936eeb5588b..d31d32206ba3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -25,6 +25,7 @@
#include <linux/usb.h>
#include <linux/timer.h>
+#include <linux/kernel.h>
#include "../core/hcd.h"
/* Code sharing between pci-quirks and xhci hcd */
@@ -42,14 +43,6 @@
* xHCI register interface.
* This corresponds to the eXtensible Host Controller Interface (xHCI)
* Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers. Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
*/
/**
@@ -96,6 +89,7 @@ struct xhci_cap_regs {
#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
/* HCSPARAMS3 - hcs_params3 - bitmasks */
/* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -166,10 +160,10 @@ struct xhci_op_regs {
u32 reserved1;
u32 reserved2;
u32 dev_notification;
- u32 cmd_ring[2];
+ u64 cmd_ring;
/* rsvd: offset 0x20-2F */
u32 reserved3[4];
- u32 dcbaa_ptr[2];
+ u64 dcbaa_ptr;
u32 config_reg;
/* rsvd: offset 0x3C-3FF */
u32 reserved4[241];
@@ -254,7 +248,7 @@ struct xhci_op_regs {
#define CMD_RING_RUNNING (1 << 3)
/* bits 4:5 reserved and should be preserved */
/* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK (0xffffffc0)
+#define CMD_RING_RSVD_BITS (0x3f)
/* CONFIG - Configure Register - config_reg bitmasks */
/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
@@ -382,8 +376,8 @@ struct xhci_intr_reg {
u32 irq_control;
u32 erst_size;
u32 rsvd;
- u32 erst_base[2];
- u32 erst_dequeue[2];
+ u64 erst_base;
+ u64 erst_dequeue;
};
/* irq_pending bitmasks */
@@ -453,6 +447,27 @@ struct xhci_doorbell_array {
/**
+ * struct xhci_container_ctx
+ * @type: Type of context. Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context. Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+ unsigned type;
+#define XHCI_CTX_TYPE_DEVICE 0x1
+#define XHCI_CTX_TYPE_INPUT 0x2
+
+ int size;
+
+ u8 *bytes;
+ dma_addr_t dma;
+};
+
+/**
* struct xhci_slot_ctx
* @dev_info: Route string, device speed, hub info, and last valid endpoint
* @dev_info2: Max exit latency for device number, root hub port number
@@ -538,7 +553,7 @@ struct xhci_slot_ctx {
struct xhci_ep_ctx {
u32 ep_info;
u32 ep_info2;
- u32 deq[2];
+ u64 deq;
u32 tx_info;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[3];
@@ -589,18 +604,16 @@ struct xhci_ep_ctx {
/**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
*
* @drop_context: set the bit of the endpoint context you want to disable
* @add_context: set the bit of the endpoint context you want to enable
*/
-struct xhci_device_control {
+struct xhci_input_control_ctx {
u32 drop_flags;
u32 add_flags;
- u32 rsvd[6];
- struct xhci_slot_ctx slot;
- struct xhci_ep_ctx ep[31];
+ u32 rsvd2[6];
};
/* drop context bitmasks */
@@ -608,7 +621,6 @@ struct xhci_device_control {
/* add context bitmasks */
#define ADD_EP(x) (0x1 << x)
-
struct xhci_virt_device {
/*
* Commands to the hardware are passed an "input context" that
@@ -618,11 +630,10 @@ struct xhci_virt_device {
* track of input and output contexts separately because
* these commands might fail and we don't trust the hardware.
*/
- struct xhci_device_control *out_ctx;
- dma_addr_t out_ctx_dma;
+ struct xhci_container_ctx *out_ctx;
/* Used for addressing devices and configuration changes */
- struct xhci_device_control *in_ctx;
- dma_addr_t in_ctx_dma;
+ struct xhci_container_ctx *in_ctx;
+
/* FIXME when stream support is added */
struct xhci_ring *ep_rings[31];
/* Temporary storage in case the configure endpoint command fails and we
@@ -641,7 +652,7 @@ struct xhci_virt_device {
*/
struct xhci_device_context_array {
/* 64-bit device addresses; we only write 32-bit addresses */
- u32 dev_context_ptrs[2*MAX_HC_SLOTS];
+ u64 dev_context_ptrs[MAX_HC_SLOTS];
/* private xHCD pointers */
dma_addr_t dma;
};
@@ -654,7 +665,7 @@ struct xhci_device_context_array {
struct xhci_stream_ctx {
/* 64-bit stream ring address, cycle state, and stream type */
- u32 stream_ring[2];
+ u64 stream_ring;
/* offset 0x14 - 0x1f reserved for HC internal use */
u32 reserved[2];
};
@@ -662,7 +673,7 @@ struct xhci_stream_ctx {
struct xhci_transfer_event {
/* 64-bit buffer address, or immediate data */
- u32 buffer[2];
+ u64 buffer;
u32 transfer_len;
/* This field is interpreted differently based on the type of TRB */
u32 flags;
@@ -744,7 +755,7 @@ struct xhci_transfer_event {
struct xhci_link_trb {
/* 64-bit segment pointer*/
- u32 segment_ptr[2];
+ u64 segment_ptr;
u32 intr_target;
u32 control;
};
@@ -755,7 +766,7 @@ struct xhci_link_trb {
/* Command completion event TRB */
struct xhci_event_cmd {
/* Pointer to command TRB, or the value passed by the event data trb */
- u32 cmd_trb[2];
+ u64 cmd_trb;
u32 status;
u32 flags;
};
@@ -848,8 +859,8 @@ union xhci_trb {
#define TRB_CONFIG_EP 12
/* Evaluate Context Command */
#define TRB_EVAL_CONTEXT 13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING 14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP 14
/* Stop Transfer Ring Command */
#define TRB_STOP_RING 15
/* Set Transfer Ring Dequeue Pointer Command */
@@ -929,6 +940,7 @@ struct xhci_ring {
unsigned int cancels_pending;
unsigned int state;
#define SET_DEQ_PENDING (1 << 0)
+#define EP_HALTED (1 << 1)
/* The TRB that was last reported in a stopped endpoint ring */
union xhci_trb *stopped_trb;
struct xhci_td *stopped_td;
@@ -940,9 +952,15 @@ struct xhci_ring {
u32 cycle_state;
};
+struct xhci_dequeue_state {
+ struct xhci_segment *new_deq_seg;
+ union xhci_trb *new_deq_ptr;
+ int new_cycle_state;
+};
+
struct xhci_erst_entry {
/* 64-bit event ring segment address */
- u32 seg_addr[2];
+ u64 seg_addr;
u32 seg_size;
/* Set to zero */
u32 rsvd;
@@ -957,6 +975,13 @@ struct xhci_erst {
unsigned int erst_size;
};
+struct xhci_scratchpad {
+ u64 *sp_array;
+ dma_addr_t sp_dma;
+ void **sp_buffers;
+ dma_addr_t *sp_dma_buffers;
+};
+
/*
* Each segment table entry is 4*32bits long. 1K seems like an ok size:
* (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1011,6 +1036,9 @@ struct xhci_hcd {
struct xhci_ring *cmd_ring;
struct xhci_ring *event_ring;
struct xhci_erst erst;
+ /* Scratchpad */
+ struct xhci_scratchpad *scratchpad;
+
/* slot enabling and address device helpers */
struct completion addr_dev;
int slot_id;
@@ -1071,13 +1099,43 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
static inline void xhci_writel(struct xhci_hcd *xhci,
const unsigned int val, __u32 __iomem *regs)
{
- if (!in_interrupt())
- xhci_dbg(xhci,
- "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
- regs, val);
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+ regs, val);
writel(val, regs);
}
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers. Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+ __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u64 val_lo = readl(ptr);
+ u64 val_hi = readl(ptr + 1);
+ return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+ const u64 val, __u64 __iomem *regs)
+{
+ __u32 __iomem *ptr = (__u32 __iomem *) regs;
+ u32 val_lo = lower_32_bits(val);
+ u32 val_hi = upper_32_bits(val);
+
+ xhci_dbg(xhci,
+ "`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+ regs, (long unsigned int) val);
+ writel(val_lo, ptr);
+ writel(val_hi, ptr + 1);
+}
+
/* xHCI debugging */
void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1090,7 +1148,7 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
/* xHCI memory managment */
void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1128,6 +1186,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
@@ -1148,10 +1207,23 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
int slot_id, unsigned int ep_index);
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+ unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+ unsigned int slot_id, unsigned int ep_index,
+ struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+ struct xhci_ring *ep_ring, unsigned int slot_id,
+ unsigned int ep_index, struct xhci_dequeue_state *deq_state);
/* xHCI roothub code */
int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
char *buf, u16 wLength);
int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
#endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a68d91a11bee..abe3aa67ed00 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -220,7 +220,7 @@ config USB_IOWARRIOR
config USB_TEST
tristate "USB testing driver"
- depends on USB && USB_DEVICEFS
+ depends on USB
help
This driver is for testing host controller software. It is used
with specialized device firmware for regression and stress testing,
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 3c5fe5cee05a..90e1a8dedfa9 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -18,6 +18,7 @@
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/usb/iowarrior.h>
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index deb95bb49fd1..d645f3899fe1 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/random.h>
#include <linux/poll.h>
diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c
index e0ff9ccd866b..29092b8e59ce 100644
--- a/drivers/usb/misc/usblcd.c
+++ b/drivers/usb/misc/usblcd.c
@@ -16,6 +16,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/mutex.h>
#include <asm/uaccess.h>
diff --git a/drivers/usb/musb/cppi_dma.h b/drivers/usb/musb/cppi_dma.h
index 8a39de3e6e47..59bf949e589b 100644
--- a/drivers/usb/musb/cppi_dma.h
+++ b/drivers/usb/musb/cppi_dma.h
@@ -5,7 +5,6 @@
#include <linux/slab.h>
#include <linux/list.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/dmapool.h>
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 180d7daa4099..e16ff605c458 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,13 +35,14 @@
#include <mach/hardware.h>
#include <mach/memory.h>
#include <mach/gpio.h>
+#include <mach/cputype.h>
#include <asm/mach-types.h>
#include "musb_core.h"
#ifdef CONFIG_MACH_DAVINCI_EVM
-#define GPIO_nVBUS_DRV 87
+#define GPIO_nVBUS_DRV 144
#endif
#include "davinci.h"
@@ -329,7 +330,6 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
mod_timer(&otg_workaround, jiffies + POLL_SECONDS * HZ);
WARNING("VBUS error workaround (delay coming)\n");
} else if (is_host_enabled(musb) && drvvbus) {
- musb->is_active = 1;
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_WAIT_VRISE;
@@ -343,7 +343,9 @@ static irqreturn_t davinci_interrupt(int irq, void *__hci)
portstate(musb->port1_status &= ~USB_PORT_STAT_POWER);
}
- /* NOTE: this must complete poweron within 100 msec */
+ /* NOTE: this must complete poweron within 100 msec
+ * (OTG_TIME_A_WAIT_VRISE) but we don't check for that.
+ */
davinci_source_power(musb, drvvbus, 0);
DBG(2, "VBUS %s (%s)%s, devctl %02x\n",
drvvbus ? "on" : "off",
@@ -411,6 +413,21 @@ int __init musb_platform_init(struct musb *musb)
__raw_writel(phy_ctrl, USB_PHY_CTRL);
}
+ /* On dm355, the default-A state machine needs DRVVBUS control.
+ * If we won't be a host, there's no need to turn it on.
+ */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ if (is_host_enabled(musb)) {
+ deepsleep &= ~DRVVBUS_OVERRIDE;
+ } else {
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ }
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
/* reset the controller */
musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1);
@@ -437,6 +454,15 @@ int musb_platform_exit(struct musb *musb)
if (is_host_enabled(musb))
del_timer_sync(&otg_workaround);
+ /* force VBUS off */
+ if (cpu_is_davinci_dm355()) {
+ u32 deepsleep = __raw_readl(DM355_DEEPSLEEP);
+
+ deepsleep &= ~DRVVBUS_FORCE;
+ deepsleep |= DRVVBUS_OVERRIDE;
+ __raw_writel(deepsleep, DM355_DEEPSLEEP);
+ }
+
davinci_source_power(musb, 0 /*off*/, 1);
/* delay, to avoid problems with module reload */
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 554a414f65d1..c7c1ca0494cd 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1326,7 +1326,6 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
int i;
/* log core options (read using indexed model) */
- musb_ep_select(mbase, 0);
reg = musb_read_configdata(mbase);
strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
@@ -1990,7 +1989,7 @@ bad_config:
if (status < 0)
goto fail2;
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
#endif
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index f3772ca3b2cf..381d648a36b8 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -38,7 +38,6 @@
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/interrupt.h>
-#include <linux/smp_lock.h>
#include <linux/errno.h>
#include <linux/timer.h>
#include <linux/clk.h>
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 40ed50ecedff..7a6778675ad3 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -407,7 +407,7 @@ stall:
csr |= MUSB_RXCSR_P_SENDSTALL
| MUSB_RXCSR_FLUSHFIFO
| MUSB_RXCSR_CLRDATATOG
- | MUSB_TXCSR_P_WZC_BITS;
+ | MUSB_RXCSR_P_WZC_BITS;
musb_writew(regs, MUSB_RXCSR,
csr);
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 94a2a350a414..cf94511485f2 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -373,7 +373,7 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb,
musb_save_toggle(qh, is_in, urb);
break;
case USB_ENDPOINT_XFER_ISOC:
- if (urb->error_count)
+ if (status == 0 && urb->error_count)
status = -EXDEV;
break;
}
@@ -2235,13 +2235,30 @@ static void musb_h_stop(struct usb_hcd *hcd)
static int musb_bus_suspend(struct usb_hcd *hcd)
{
struct musb *musb = hcd_to_musb(hcd);
+ u8 devctl;
- if (musb->xceiv->state == OTG_STATE_A_SUSPEND)
+ if (!is_host_active(musb))
return 0;
- if (is_host_active(musb) && musb->is_active) {
- WARNING("trying to suspend as %s is_active=%i\n",
- otg_state_string(musb), musb->is_active);
+ switch (musb->xceiv->state) {
+ case OTG_STATE_A_SUSPEND:
+ return 0;
+ case OTG_STATE_A_WAIT_VRISE:
+ /* ID could be grounded even if there's no device
+ * on the other end of the cable. NOTE that the
+ * A_WAIT_VRISE timers are messy with MUSB...
+ */
+ devctl = musb_readb(musb->mregs, MUSB_DEVCTL);
+ if ((devctl & MUSB_DEVCTL_VBUS) == MUSB_DEVCTL_VBUS)
+ musb->xceiv->state = OTG_STATE_A_WAIT_BCON;
+ break;
+ default:
+ break;
+ }
+
+ if (musb->is_active) {
+ WARNING("trying to suspend as %s while active\n",
+ otg_state_string(musb));
return -EBUSY;
} else
return 0;
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index de3b2f18db44..fbfd3fd9ce1f 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -323,6 +323,7 @@ static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
static inline u8 musb_read_configdata(void __iomem *mbase)
{
+ musb_writeb(mbase, MUSB_INDEX, 0);
return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
}
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index 69feeec1628c..aa884d072f0b 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -59,18 +59,4 @@ config NOP_USB_XCEIV
built-in with usb ip or which are autonomous and doesn't require any
phy programming such as ISP1x04 etc.
-config USB_LANGWELL_OTG
- tristate "Intel Langwell USB OTG dual-role support"
- depends on USB && MRST
- select USB_OTG
- select USB_OTG_UTILS
- help
- Say Y here if you want to build Intel Langwell USB OTG
- transciever driver in kernel. This driver implements role
- switch between EHCI host driver and Langwell USB OTG
- client driver.
-
- To compile this driver as a module, choose M here: the
- module will be called langwell_otg.
-
endif # USB || OTG
diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile
index 6d1abdd3c0ac..208167856529 100644
--- a/drivers/usb/otg/Makefile
+++ b/drivers/usb/otg/Makefile
@@ -9,7 +9,6 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o
obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o
-obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o
obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o
ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
deleted file mode 100644
index 6f628d0e9f39..000000000000
--- a/drivers/usb/otg/langwell_otg.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- * Intel Langwell USB OTG transceiver driver
- * Copyright (C) 2008 - 2009, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-/* This driver helps to switch Langwell OTG controller function between host
- * and peripheral. It works with EHCI driver and Langwell client controller
- * driver together.
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/moduleparam.h>
-#include <linux/usb/ch9.h>
-#include <linux/usb/gadget.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/notifier.h>
-#include <asm/ipc_defs.h>
-#include <linux/delay.h>
-#include "../core/hcd.h"
-
-#include <linux/usb/langwell_otg.h>
-
-#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver"
-#define DRIVER_VERSION "3.0.0.32L.0002"
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_AUTHOR("Henry Yuan <hang.yuan@intel.com>, Hao Wu <hao.wu@intel.com>");
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-static const char driver_name[] = "langwell_otg";
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id);
-static void langwell_otg_remove(struct pci_dev *pdev);
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message);
-static int langwell_otg_resume(struct pci_dev *pdev);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host);
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget);
-static int langwell_otg_start_srp(struct otg_transceiver *otg);
-
-static const struct pci_device_id pci_ids[] = {{
- .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe),
- .class_mask = ~0,
- .vendor = 0x8086,
- .device = 0x0811,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
-}, { /* end: all zeroes */ }
-};
-
-static struct pci_driver otg_pci_driver = {
- .name = (char *) driver_name,
- .id_table = pci_ids,
-
- .probe = langwell_otg_probe,
- .remove = langwell_otg_remove,
-
- .suspend = langwell_otg_suspend,
- .resume = langwell_otg_resume,
-};
-
-static const char *state_string(enum usb_otg_state state)
-{
- switch (state) {
- case OTG_STATE_A_IDLE:
- return "a_idle";
- case OTG_STATE_A_WAIT_VRISE:
- return "a_wait_vrise";
- case OTG_STATE_A_WAIT_BCON:
- return "a_wait_bcon";
- case OTG_STATE_A_HOST:
- return "a_host";
- case OTG_STATE_A_SUSPEND:
- return "a_suspend";
- case OTG_STATE_A_PERIPHERAL:
- return "a_peripheral";
- case OTG_STATE_A_WAIT_VFALL:
- return "a_wait_vfall";
- case OTG_STATE_A_VBUS_ERR:
- return "a_vbus_err";
- case OTG_STATE_B_IDLE:
- return "b_idle";
- case OTG_STATE_B_SRP_INIT:
- return "b_srp_init";
- case OTG_STATE_B_PERIPHERAL:
- return "b_peripheral";
- case OTG_STATE_B_WAIT_ACON:
- return "b_wait_acon";
- case OTG_STATE_B_HOST:
- return "b_host";
- default:
- return "UNDEFINED";
- }
-}
-
-/* HSM timers */
-static inline struct langwell_otg_timer *otg_timer_initializer
-(void (*function)(unsigned long), unsigned long expires, unsigned long data)
-{
- struct langwell_otg_timer *timer;
- timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL);
- timer->function = function;
- timer->expires = expires;
- timer->data = data;
- return timer;
-}
-
-static struct langwell_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr,
- *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_res_tmr,
- *b_bus_suspend_tmr;
-
-static struct list_head active_timers;
-
-static struct langwell_otg *the_transceiver;
-
-/* host/client notify transceiver when event affects HNP state */
-void langwell_update_transceiver()
-{
- otg_dbg("transceiver driver is notified\n");
- queue_work(the_transceiver->qwork, &the_transceiver->work);
-}
-EXPORT_SYMBOL(langwell_update_transceiver);
-
-static int langwell_otg_set_host(struct otg_transceiver *otg,
- struct usb_bus *host)
-{
- otg->host = host;
-
- return 0;
-}
-
-static int langwell_otg_set_peripheral(struct otg_transceiver *otg,
- struct usb_gadget *gadget)
-{
- otg->gadget = gadget;
-
- return 0;
-}
-
-static int langwell_otg_set_power(struct otg_transceiver *otg,
- unsigned mA)
-{
- return 0;
-}
-
-/* A-device drives vbus, controlled through PMIC CHRGCNTL register*/
-static void langwell_otg_drv_vbus(int on)
-{
- struct ipc_pmic_reg_data pmic_data = {0};
- struct ipc_pmic_reg_data battery_data;
-
- /* Check if battery is attached or not */
- battery_data.pmic_reg_data[0].register_address = 0xd2;
- battery_data.ioc = 0;
- battery_data.num_entries = 1;
- if (ipc_pmic_register_read(&battery_data)) {
- otg_dbg("Failed to read PMIC register 0xd2.\n");
- return;
- }
-
- if ((battery_data.pmic_reg_data[0].value & 0x20) == 0) {
- otg_dbg("no battery attached\n");
- return;
- }
-
- /* Workaround for battery attachment issue */
- if (battery_data.pmic_reg_data[0].value == 0x34) {
- otg_dbg("battery \n");
- return;
- }
-
- otg_dbg("battery attached\n");
-
- pmic_data.ioc = 0;
- pmic_data.pmic_reg_data[0].register_address = 0xD4;
- pmic_data.num_entries = 1;
- if (on)
- pmic_data.pmic_reg_data[0].value = 0x20;
- else
- pmic_data.pmic_reg_data[0].value = 0xc0;
-
- if (ipc_pmic_register_write(&pmic_data, TRUE))
- otg_dbg("Failed to write PMIC.\n");
-
-}
-
-/* charge vbus or discharge vbus through a resistor to ground */
-static void langwell_otg_chrg_vbus(int on)
-{
-
- u32 val;
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD,
- the_transceiver->regs + CI_OTGSC);
-
-}
-
-/* Start SRP */
-static int langwell_otg_start_srp(struct otg_transceiver *otg)
-{
- u32 val;
-
- otg_dbg("Start SRP ->\n");
-
- val = readl(the_transceiver->regs + CI_OTGSC);
-
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP,
- the_transceiver->regs + CI_OTGSC);
-
- /* Check if the data plus is finished or not */
- msleep(8);
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (val & (OTGSC_HADP | OTGSC_DP))
- otg_dbg("DataLine SRP Error\n");
-
- /* FIXME: VBus SRP */
-
- return 0;
-}
-
-
-/* stop SOF via bus_suspend */
-static void langwell_otg_loc_sof(int on)
-{
- struct usb_hcd *hcd;
- int err;
-
- otg_dbg("loc_sof -> %d\n", on);
-
- hcd = bus_to_hcd(the_transceiver->otg.host);
- if (on)
- err = hcd->driver->bus_resume(hcd);
- else
- err = hcd->driver->bus_suspend(hcd);
-
- if (err)
- otg_dbg("Failed to resume/suspend bus - %d\n", err);
-}
-
-static void langwell_otg_phy_low_power(int on)
-{
- u32 val;
-
- otg_dbg("phy low power mode-> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_HOSTPC1);
- if (on)
- writel(val | HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
- else
- writel(val & ~HOSTPC1_PHCD, the_transceiver->regs + CI_HOSTPC1);
-}
-
-/* Enable/Disable OTG interrupt */
-static void langwell_otg_intr(int on)
-{
- u32 val;
-
- otg_dbg("interrupt -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on) {
- val = val | (OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- } else {
- val = val & ~(OTGSC_INTEN_MASK | OTGSC_IDPU);
- writel(val, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* set HAAR: Hardware Assist Auto-Reset */
-static void langwell_otg_HAAR(int on)
-{
- u32 val;
-
- otg_dbg("HAAR -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR,
- the_transceiver->regs + CI_OTGSC);
-}
-
-/* set HABA: Hardware Assist B-Disconnect to A-Connect */
-static void langwell_otg_HABA(int on)
-{
- u32 val;
-
- otg_dbg("HABA -> %d\n", on);
-
- val = readl(the_transceiver->regs + CI_OTGSC);
- if (on)
- writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
- else
- writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA,
- the_transceiver->regs + CI_OTGSC);
-}
-
-static int langwell_otg_check_se0_srp(int on)
-{
- u32 val;
-
- int delay_time = TB_SE0_SRP * 10; /* step is 100us */
-
- otg_dbg("check_se0_srp -> \n");
-
- do {
- udelay(100);
- if (!delay_time--)
- break;
- val = readl(the_transceiver->regs + CI_PORTSC1);
- val &= PORTSC_LS;
- } while (!val);
-
- otg_dbg("check_se0_srp <- \n");
- return val;
-}
-
-/* The timeout callback function to set time out bit */
-static void set_tmout(unsigned long indicator)
-{
- *(int *)indicator = 1;
-}
-
-void langwell_otg_nsf_msg(unsigned long indicator)
-{
- switch (indicator) {
- case 2:
- case 4:
- case 6:
- case 7:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not responding\n",
- indicator);
- break;
- case 3:
- printk(KERN_ERR "OTG:NSF-%lu - deivce not supported\n",
- indicator);
- break;
- default:
- printk(KERN_ERR "Do not have this kind of NSF\n");
- break;
- }
-}
-
-/* Initialize timers */
-static void langwell_otg_init_timers(struct otg_hsm *hsm)
-{
- /* HSM used timers */
- a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE,
- (unsigned long)&hsm->a_wait_vrise_tmout);
- a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON,
- (unsigned long)&hsm->a_wait_bcon_tmout);
- a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS,
- (unsigned long)&hsm->a_aidl_bdis_tmout);
- b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST,
- (unsigned long)&hsm->b_ase0_brst_tmout);
- b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP,
- (unsigned long)&hsm->b_se0_srp);
- b_srp_res_tmr = otg_timer_initializer(&set_tmout, TB_SRP_RES,
- (unsigned long)&hsm->b_srp_res_tmout);
- b_bus_suspend_tmr = otg_timer_initializer(&set_tmout, TB_BUS_SUSPEND,
- (unsigned long)&hsm->b_bus_suspend_tmout);
-}
-
-/* Free timers */
-static void langwell_otg_free_timers(void)
-{
- kfree(a_wait_vrise_tmr);
- kfree(a_wait_bcon_tmr);
- kfree(a_aidl_bdis_tmr);
- kfree(b_ase0_brst_tmr);
- kfree(b_se0_srp_tmr);
- kfree(b_srp_res_tmr);
- kfree(b_bus_suspend_tmr);
-}
-
-/* Add timer to timer list */
-static void langwell_otg_add_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer;
- u32 val32;
-
- /* Check if the timer is already in the active list,
- * if so update timer count
- */
- list_for_each_entry(tmp_timer, &active_timers, list)
- if (tmp_timer == timer) {
- timer->count = timer->expires;
- return;
- }
- timer->count = timer->expires;
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 | OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-
- list_add_tail(&timer->list, &active_timers);
-}
-
-/* Remove timer from the timer list; clear timeout status */
-static void langwell_otg_del_timer(void *gtimer)
-{
- struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer;
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- u32 val32;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list)
- if (tmp_timer == timer)
- list_del(&timer->list);
-
- if (list_empty(&active_timers)) {
- val32 = readl(the_transceiver->regs + CI_OTGSC);
- writel(val32 & ~OTGSC_1MSE, the_transceiver->regs + CI_OTGSC);
- }
-}
-
-/* Reduce timer count by 1, and find timeout conditions.*/
-static int langwell_otg_tick_timer(u32 *int_sts)
-{
- struct langwell_otg_timer *tmp_timer, *del_tmp;
- int expired = 0;
-
- list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) {
- tmp_timer->count--;
- /* check if timer expires */
- if (!tmp_timer->count) {
- list_del(&tmp_timer->list);
- tmp_timer->function(tmp_timer->data);
- expired = 1;
- }
- }
-
- if (list_empty(&active_timers)) {
- otg_dbg("tick timer: disable 1ms int\n");
- *int_sts = *int_sts & ~OTGSC_1MSE;
- }
- return expired;
-}
-
-static void reset_otg(void)
-{
- u32 val;
- int delay_time = 1000;
-
- otg_dbg("reseting OTG controller ...\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- writel(val | USBCMD_RST, the_transceiver->regs + CI_USBCMD);
- do {
- udelay(100);
- if (!delay_time--)
- otg_dbg("reset timeout\n");
- val = readl(the_transceiver->regs + CI_USBCMD);
- val &= USBCMD_RST;
- } while (val != 0);
- otg_dbg("reset done.\n");
-}
-
-static void set_host_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_HOST;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void set_client_mode(void)
-{
- u32 val;
-
- reset_otg();
- val = readl(the_transceiver->regs + CI_USBMODE);
- val = (val & (~USBMODE_CM)) | USBMODE_DEVICE;
- writel(val, the_transceiver->regs + CI_USBMODE);
-}
-
-static void init_hsm(void)
-{
- struct langwell_otg *langwell = the_transceiver;
- u32 val32;
-
- /* read OTGSC after reset */
- val32 = readl(langwell->regs + CI_OTGSC);
- otg_dbg("%s: OTGSC init value = 0x%x\n", __func__, val32);
-
- /* set init state */
- if (val32 & OTGSC_ID) {
- langwell->hsm.id = 1;
- langwell->otg.default_a = 0;
- set_client_mode();
- langwell->otg.state = OTG_STATE_B_IDLE;
- langwell_otg_drv_vbus(0);
- } else {
- langwell->hsm.id = 0;
- langwell->otg.default_a = 1;
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
-
- /* set session indicator */
- if (val32 & OTGSC_BSE)
- langwell->hsm.b_sess_end = 1;
- if (val32 & OTGSC_BSV)
- langwell->hsm.b_sess_vld = 1;
- if (val32 & OTGSC_ASV)
- langwell->hsm.a_sess_vld = 1;
- if (val32 & OTGSC_AVV)
- langwell->hsm.a_vbus_vld = 1;
-
- /* defautly power the bus */
- langwell->hsm.a_bus_req = 1;
- langwell->hsm.a_bus_drop = 0;
- /* defautly don't request bus as B device */
- langwell->hsm.b_bus_req = 0;
- /* no system error */
- langwell->hsm.a_clr_err = 0;
-}
-
-static irqreturn_t otg_dummy_irq(int irq, void *_dev)
-{
- void __iomem *reg_base = _dev;
- u32 val;
- u32 int_mask = 0;
-
- val = readl(reg_base + CI_USBMODE);
- if ((val & USBMODE_CM) != USBMODE_DEVICE)
- return IRQ_NONE;
-
- val = readl(reg_base + CI_USBSTS);
- int_mask = val & INTR_DUMMY_MASK;
-
- if (int_mask == 0)
- return IRQ_NONE;
-
- /* clear hsm.b_conn here since host driver can't detect it
- * otg_dummy_irq called means B-disconnect happened.
- */
- if (the_transceiver->hsm.b_conn) {
- the_transceiver->hsm.b_conn = 0;
- if (spin_trylock(&the_transceiver->wq_lock)) {
- queue_work(the_transceiver->qwork,
- &the_transceiver->work);
- spin_unlock(&the_transceiver->wq_lock);
- }
- }
- /* Clear interrupts */
- writel(int_mask, reg_base + CI_USBSTS);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t otg_irq(int irq, void *_dev)
-{
- struct langwell_otg *langwell = _dev;
- u32 int_sts, int_en;
- u32 int_mask = 0;
- int flag = 0;
-
- int_sts = readl(langwell->regs + CI_OTGSC);
- int_en = (int_sts & OTGSC_INTEN_MASK) >> 8;
- int_mask = int_sts & int_en;
- if (int_mask == 0)
- return IRQ_NONE;
-
- if (int_mask & OTGSC_IDIS) {
- otg_dbg("%s: id change int\n", __func__);
- langwell->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_DPIS) {
- otg_dbg("%s: data pulse int\n", __func__);
- langwell->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSEIS) {
- otg_dbg("%s: b session end int\n", __func__);
- langwell->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_BSVIS) {
- otg_dbg("%s: b session valid int\n", __func__);
- langwell->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_ASVIS) {
- otg_dbg("%s: a session valid int\n", __func__);
- langwell->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0;
- flag = 1;
- }
- if (int_mask & OTGSC_AVVIS) {
- otg_dbg("%s: a vbus valid int\n", __func__);
- langwell->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0;
- flag = 1;
- }
-
- if (int_mask & OTGSC_1MSS) {
- /* need to schedule otg_work if any timer is expired */
- if (langwell_otg_tick_timer(&int_sts))
- flag = 1;
- }
-
- writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask,
- langwell->regs + CI_OTGSC);
- if (flag)
- queue_work(langwell->qwork, &langwell->work);
-
- return IRQ_HANDLED;
-}
-
-static void langwell_otg_work(struct work_struct *work)
-{
- struct langwell_otg *langwell = container_of(work,
- struct langwell_otg, work);
- int retval;
-
- otg_dbg("%s: old state = %s\n", __func__,
- state_string(langwell->otg.state));
-
- switch (langwell->otg.state) {
- case OTG_STATE_UNDEFINED:
- case OTG_STATE_B_IDLE:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_chrg_vbus(0);
- langwell_otg_drv_vbus(0);
-
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_srp_res_tmout) {
- langwell->hsm.b_srp_res_tmout = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_nsf_msg(6);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_srp_res_tmr);
- langwell->hsm.b_sess_end = 0;
- langwell->hsm.a_bus_suspend = 0;
-
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
-
- } else if (langwell->hsm.b_bus_req &&
- (langwell->hsm.b_sess_end)) {
- /* workaround for b_se0_srp detection */
- retval = langwell_otg_check_se0_srp(0);
- if (retval) {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("LS is not SE0, try again later\n");
- } else {
- /* Start SRP */
- langwell_otg_start_srp(&langwell->otg);
- langwell_otg_add_timer(b_srp_res_tmr);
- }
- }
- break;
- case OTG_STATE_B_SRP_INIT:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.b_sess_vld) {
- langwell_otg_chrg_vbus(0);
- if (langwell->client_ops) {
- langwell->client_ops->resume(langwell->pdev);
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- } else
- otg_dbg("client driver not loaded.\n");
- }
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.b_bus_req && langwell->hsm.b_hnp_enable
- && langwell->hsm.a_bus_suspend) {
-
- if (langwell->client_ops) {
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- } else
- otg_dbg("client driver has been removed.\n");
-
- langwell_otg_HAAR(1);
- langwell->hsm.a_conn = 0;
-
- if (langwell->host_ops) {
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- langwell->otg.state = OTG_STATE_B_WAIT_ACON;
- } else
- otg_dbg("host driver not loaded.\n");
-
- langwell->hsm.a_bus_resume = 0;
- langwell->hsm.b_ase0_brst_tmout = 0;
- langwell_otg_add_timer(b_ase0_brst_tmr);
- }
- break;
-
- case OTG_STATE_B_WAIT_ACON:
- if (!langwell->hsm.id) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
-
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- langwell_otg_HAAR(0);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_conn) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell->otg.state = OTG_STATE_B_HOST;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_resume ||
- langwell->hsm.b_ase0_brst_tmout) {
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- langwell_otg_nsf_msg(7);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
- langwell->hsm.b_bus_req = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_B_HOST:
- if (!langwell->hsm.id) {
- langwell->otg.default_a = 1;
- langwell->hsm.a_srp_det = 0;
-
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
- set_host_mode();
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_A_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.b_sess_vld) {
- langwell->hsm.b_hnp_enable = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_chrg_vbus(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if ((!langwell->hsm.b_bus_req) ||
- (!langwell->hsm.a_conn)) {
- langwell->hsm.b_bus_req = 0;
- langwell_otg_loc_sof(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.a_bus_suspend = 0;
-
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell->otg.state = OTG_STATE_B_PERIPHERAL;
- }
- break;
-
- case OTG_STATE_A_IDLE:
- langwell->otg.default_a = 1;
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- langwell_otg_drv_vbus(0);
- langwell_otg_chrg_vbus(0);
-
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_sess_vld) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_srp_det = 1;
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_bus_drop &&
- (langwell->hsm.a_srp_det || langwell->hsm.a_bus_req)) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VRISE:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.b_bus_req = 0;
- langwell->otg.default_a = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- } else if (langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_vrise_tmr);
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.a_wait_vrise_tmout) {
- if (langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->probe(
- langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.b_conn = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else {
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- }
- break;
- case OTG_STATE_A_WAIT_BCON:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop ||
- (langwell->hsm.a_wait_bcon_tmout &&
- !langwell->hsm.a_bus_req)) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_conn) {
- langwell_otg_del_timer(a_wait_bcon_tmr);
-
- langwell->hsm.a_suspend_req = 0;
- langwell->otg.state = OTG_STATE_A_HOST;
- if (!langwell->hsm.a_bus_req &&
- langwell->hsm.a_set_b_hnp_en) {
- /* It is not safe enough to do a fast
- * transistion from A_WAIT_BCON to
- * A_SUSPEND */
- msleep(10000);
- if (langwell->hsm.a_bus_req)
- break;
-
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED,
- driver_name, langwell->regs) != 0) {
- otg_dbg("request interrupt %d fail\n",
- langwell->pdev->irq);
- }
-
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
-
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.a_bus_req &&
- !langwell->hsm.a_set_b_hnp_en) {
- struct pci_dev *pdev = langwell->pdev;
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- }
- }
- break;
- case OTG_STATE_A_HOST:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_drop ||
- (!langwell->hsm.a_set_b_hnp_en && !langwell->hsm.a_bus_req)) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.a_vbus_vld) {
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_set_b_hnp_en
- && !langwell->hsm.a_bus_req) {
- /* Set HABA to enable hardware assistance to signal
- * A-connect after receiver B-disconnect. Hardware
- * will then set client mode and enable URE, SLE and
- * PCE after the assistance. otg_dummy_irq is used to
- * clean these ints when client driver is not resumed.
- */
- if (request_irq(langwell->pdev->irq,
- otg_dummy_irq, IRQF_SHARED, driver_name,
- langwell->regs) != 0) {
- otg_dbg("request interrupt %d failed\n",
- langwell->pdev->irq);
- }
-
- /* set HABA */
- langwell_otg_HABA(1);
- langwell->hsm.b_bus_resume = 0;
- langwell->hsm.a_aidl_bdis_tmout = 0;
- langwell_otg_add_timer(a_aidl_bdis_tmr);
- langwell_otg_loc_sof(0);
- langwell->otg.state = OTG_STATE_A_SUSPEND;
- } else if (!langwell->hsm.b_conn || !langwell->hsm.a_bus_req) {
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_SUSPEND:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req ||
- langwell->hsm.b_bus_resume) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- langwell->hsm.a_suspend_req = 0;
- langwell_otg_loc_sof(1);
- langwell->otg.state = OTG_STATE_A_HOST;
- } else if (langwell->hsm.a_aidl_bdis_tmout ||
- langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (!langwell->hsm.b_conn &&
- langwell->hsm.a_set_b_hnp_en) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
-
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
-
- langwell->hsm.b_bus_suspend = 0;
- langwell->hsm.b_bus_suspend_vld = 0;
- langwell->hsm.b_bus_suspend_tmout = 0;
-
- /* msleep(200); */
- if (langwell->client_ops)
- langwell->client_ops->resume(langwell->pdev);
- else
- otg_dbg("client driver not loaded.\n");
-
- langwell_otg_add_timer(b_bus_suspend_tmr);
- langwell->otg.state = OTG_STATE_A_PERIPHERAL;
- break;
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- free_irq(langwell->pdev->irq, langwell->regs);
- if (langwell->host_ops)
- langwell->host_ops->remove(langwell->pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- }
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->hsm.id) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- langwell->otg.default_a = 0;
- langwell->hsm.b_bus_req = 0;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (!langwell->hsm.a_vbus_vld) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_VBUS_ERR;
- } else if (langwell->hsm.a_bus_drop) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- } else if (langwell->hsm.b_bus_suspend) {
- langwell_otg_del_timer(b_bus_suspend_tmr);
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
-
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- } else if (langwell->hsm.b_bus_suspend_tmout) {
- u32 val;
- val = readl(langwell->regs + CI_PORTSC1);
- if (!(val & PORTSC_SUSP))
- break;
- if (langwell->client_ops)
- langwell->client_ops->suspend(langwell->pdev,
- PMSG_FREEZE);
- else
- otg_dbg("client driver has been removed.\n");
- if (langwell->host_ops)
- langwell->host_ops->probe(langwell->pdev,
- langwell->host_ops->id_table);
- else
- otg_dbg("host driver not loaded.\n");
- langwell->hsm.a_set_b_hnp_en = 0;
- langwell->hsm.a_wait_bcon_tmout = 0;
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_BCON;
- }
- break;
- case OTG_STATE_A_VBUS_ERR:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_clr_err) {
- langwell->hsm.a_clr_err = 0;
- langwell->hsm.a_srp_det = 0;
- reset_otg();
- init_hsm();
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
- }
- break;
- case OTG_STATE_A_WAIT_VFALL:
- if (langwell->hsm.id) {
- langwell->otg.default_a = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- queue_work(langwell->qwork, &langwell->work);
- } else if (langwell->hsm.a_bus_req) {
- langwell_otg_drv_vbus(1);
- langwell->hsm.a_wait_vrise_tmout = 0;
- langwell_otg_add_timer(a_wait_vrise_tmr);
- langwell->otg.state = OTG_STATE_A_WAIT_VRISE;
- } else if (!langwell->hsm.a_sess_vld) {
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- set_host_mode();
- langwell->otg.state = OTG_STATE_A_IDLE;
- }
- break;
- default:
- ;
- }
-
- otg_dbg("%s: new state = %s\n", __func__,
- state_string(langwell->otg.state));
-}
-
- static ssize_t
-show_registers(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "USBCMD = 0x%08x \n"
- "USBSTS = 0x%08x \n"
- "USBINTR = 0x%08x \n"
- "ASYNCLISTADDR = 0x%08x \n"
- "PORTSC1 = 0x%08x \n"
- "HOSTPC1 = 0x%08x \n"
- "OTGSC = 0x%08x \n"
- "USBMODE = 0x%08x \n",
- readl(langwell->regs + 0x30),
- readl(langwell->regs + 0x34),
- readl(langwell->regs + 0x38),
- readl(langwell->regs + 0x48),
- readl(langwell->regs + 0x74),
- readl(langwell->regs + 0xb4),
- readl(langwell->regs + 0xf4),
- readl(langwell->regs + 0xf8)
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
-
-static ssize_t
-show_hsm(struct device *_dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size,
- "\n"
- "current state = %s\n"
- "a_bus_resume = \t%d\n"
- "a_bus_suspend = \t%d\n"
- "a_conn = \t%d\n"
- "a_sess_vld = \t%d\n"
- "a_srp_det = \t%d\n"
- "a_vbus_vld = \t%d\n"
- "b_bus_resume = \t%d\n"
- "b_bus_suspend = \t%d\n"
- "b_conn = \t%d\n"
- "b_se0_srp = \t%d\n"
- "b_sess_end = \t%d\n"
- "b_sess_vld = \t%d\n"
- "id = \t%d\n"
- "a_set_b_hnp_en = \t%d\n"
- "b_srp_done = \t%d\n"
- "b_hnp_enable = \t%d\n"
- "a_wait_vrise_tmout = \t%d\n"
- "a_wait_bcon_tmout = \t%d\n"
- "a_aidl_bdis_tmout = \t%d\n"
- "b_ase0_brst_tmout = \t%d\n"
- "a_bus_drop = \t%d\n"
- "a_bus_req = \t%d\n"
- "a_clr_err = \t%d\n"
- "a_suspend_req = \t%d\n"
- "b_bus_req = \t%d\n"
- "b_bus_suspend_tmout = \t%d\n"
- "b_bus_suspend_vld = \t%d\n",
- state_string(langwell->otg.state),
- langwell->hsm.a_bus_resume,
- langwell->hsm.a_bus_suspend,
- langwell->hsm.a_conn,
- langwell->hsm.a_sess_vld,
- langwell->hsm.a_srp_det,
- langwell->hsm.a_vbus_vld,
- langwell->hsm.b_bus_resume,
- langwell->hsm.b_bus_suspend,
- langwell->hsm.b_conn,
- langwell->hsm.b_se0_srp,
- langwell->hsm.b_sess_end,
- langwell->hsm.b_sess_vld,
- langwell->hsm.id,
- langwell->hsm.a_set_b_hnp_en,
- langwell->hsm.b_srp_done,
- langwell->hsm.b_hnp_enable,
- langwell->hsm.a_wait_vrise_tmout,
- langwell->hsm.a_wait_bcon_tmout,
- langwell->hsm.a_aidl_bdis_tmout,
- langwell->hsm.b_ase0_brst_tmout,
- langwell->hsm.a_bus_drop,
- langwell->hsm.a_bus_req,
- langwell->hsm.a_clr_err,
- langwell->hsm.a_suspend_req,
- langwell->hsm.b_bus_req,
- langwell->hsm.b_bus_suspend_tmout,
- langwell->hsm.b_bus_suspend_vld
- );
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL);
-
-static ssize_t
-get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_req = 0\n");
- } else if (buf[0] == '1') {
- /* If a_bus_drop is TRUE, a_bus_req can't be set */
- if (langwell->hsm.a_bus_drop)
- return -1;
- langwell->hsm.a_bus_req = 1;
- otg_dbg("a_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUGO, get_a_bus_req, set_a_bus_req);
-
-static ssize_t
-get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.a_bus_drop);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_a_bus_drop(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.a_bus_drop = 0;
- otg_dbg("a_bus_drop = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.a_bus_drop = 1;
- langwell->hsm.a_bus_req = 0;
- otg_dbg("a_bus_drop = 1, then a_bus_req = 0\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUGO,
- get_a_bus_drop, set_a_bus_drop);
-
-static ssize_t
-get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf)
-{
- struct langwell_otg *langwell;
- char *next;
- unsigned size;
- unsigned t;
-
- langwell = the_transceiver;
- next = buf;
- size = PAGE_SIZE;
-
- t = scnprintf(next, size, "%d", langwell->hsm.b_bus_req);
- size -= t;
- next += t;
-
- return PAGE_SIZE - size;
-}
-
-static ssize_t
-set_b_bus_req(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (langwell->otg.default_a)
- return -1;
-
- if (count > 2)
- return -1;
-
- if (buf[0] == '0') {
- langwell->hsm.b_bus_req = 0;
- otg_dbg("b_bus_req = 0\n");
- } else if (buf[0] == '1') {
- langwell->hsm.b_bus_req = 1;
- otg_dbg("b_bus_req = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUGO, get_b_bus_req, set_b_bus_req);
-
-static ssize_t
-set_a_clr_err(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct langwell_otg *langwell;
- langwell = the_transceiver;
-
- if (!langwell->otg.default_a)
- return -1;
- if (count > 2)
- return -1;
-
- if (buf[0] == '1') {
- langwell->hsm.a_clr_err = 1;
- otg_dbg("a_clr_err = 1\n");
- }
- if (spin_trylock(&langwell->wq_lock)) {
- queue_work(langwell->qwork, &langwell->work);
- spin_unlock(&langwell->wq_lock);
- }
- return count;
-}
-static DEVICE_ATTR(a_clr_err, S_IWUGO, NULL, set_a_clr_err);
-
-static struct attribute *inputs_attrs[] = {
- &dev_attr_a_bus_req.attr,
- &dev_attr_a_bus_drop.attr,
- &dev_attr_b_bus_req.attr,
- &dev_attr_a_clr_err.attr,
- NULL,
-};
-
-static struct attribute_group debug_dev_attr_group = {
- .name = "inputs",
- .attrs = inputs_attrs,
-};
-
-int langwell_register_host(struct pci_driver *host_driver)
-{
- int ret = 0;
-
- the_transceiver->host_ops = host_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is registered\n");
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_host);
-
-void langwell_unregister_host(struct pci_driver *host_driver)
-{
- if (the_transceiver->host_ops)
- the_transceiver->host_ops->remove(the_transceiver->pdev);
- the_transceiver->host_ops = NULL;
- the_transceiver->hsm.a_bus_drop = 1;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("host controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_host);
-
-int langwell_register_peripheral(struct pci_driver *client_driver)
-{
- int ret = 0;
-
- if (client_driver)
- ret = client_driver->probe(the_transceiver->pdev,
- client_driver->id_table);
- if (!ret) {
- the_transceiver->client_ops = client_driver;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is registered\n");
- }
-
- return ret;
-}
-EXPORT_SYMBOL(langwell_register_peripheral);
-
-void langwell_unregister_peripheral(struct pci_driver *client_driver)
-{
- if (the_transceiver->client_ops)
- the_transceiver->client_ops->remove(the_transceiver->pdev);
- the_transceiver->client_ops = NULL;
- the_transceiver->hsm.b_bus_req = 0;
- queue_work(the_transceiver->qwork, &the_transceiver->work);
- otg_dbg("client controller driver is unregistered\n");
-}
-EXPORT_SYMBOL(langwell_unregister_peripheral);
-
-static int langwell_otg_probe(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- unsigned long resource, len;
- void __iomem *base = NULL;
- int retval;
- u32 val32;
- struct langwell_otg *langwell;
- char qname[] = "langwell_otg_queue";
-
- retval = 0;
- otg_dbg("\notg controller is detected.\n");
- if (pci_enable_device(pdev) < 0) {
- retval = -ENODEV;
- goto done;
- }
-
- langwell = kzalloc(sizeof *langwell, GFP_KERNEL);
- if (langwell == NULL) {
- retval = -ENOMEM;
- goto done;
- }
- the_transceiver = langwell;
-
- /* control register: BAR 0 */
- resource = pci_resource_start(pdev, 0);
- len = pci_resource_len(pdev, 0);
- if (!request_mem_region(resource, len, driver_name)) {
- retval = -EBUSY;
- goto err;
- }
- langwell->region = 1;
-
- base = ioremap_nocache(resource, len);
- if (base == NULL) {
- retval = -EFAULT;
- goto err;
- }
- langwell->regs = base;
-
- if (!pdev->irq) {
- otg_dbg("No IRQ.\n");
- retval = -ENODEV;
- goto err;
- }
-
- langwell->qwork = create_workqueue(qname);
- if (!langwell->qwork) {
- otg_dbg("cannot create workqueue %s\n", qname);
- retval = -ENOMEM;
- goto err;
- }
- INIT_WORK(&langwell->work, langwell_otg_work);
-
- /* OTG common part */
- langwell->pdev = pdev;
- langwell->otg.dev = &pdev->dev;
- langwell->otg.label = driver_name;
- langwell->otg.set_host = langwell_otg_set_host;
- langwell->otg.set_peripheral = langwell_otg_set_peripheral;
- langwell->otg.set_power = langwell_otg_set_power;
- langwell->otg.start_srp = langwell_otg_start_srp;
- langwell->otg.state = OTG_STATE_UNDEFINED;
- if (otg_set_transceiver(&langwell->otg)) {
- otg_dbg("can't set transceiver\n");
- retval = -EBUSY;
- goto err;
- }
-
- reset_otg();
- init_hsm();
-
- spin_lock_init(&langwell->lock);
- spin_lock_init(&langwell->wq_lock);
- INIT_LIST_HEAD(&active_timers);
- langwell_otg_init_timers(&langwell->hsm);
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, langwell) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- retval = -EBUSY;
- goto err;
- }
-
- /* enable OTGSC int */
- val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE |
- OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU;
- writel(val32, langwell->regs + CI_OTGSC);
-
- retval = device_create_file(&pdev->dev, &dev_attr_registers);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = device_create_file(&pdev->dev, &dev_attr_hsm);
- if (retval < 0) {
- otg_dbg("Can't hsm sysfs attribute: %d\n", retval);
- goto err;
- }
-
- retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group);
- if (retval < 0) {
- otg_dbg("Can't register sysfs attr group: %d\n", retval);
- goto err;
- }
-
- if (langwell->otg.state == OTG_STATE_A_IDLE)
- queue_work(langwell->qwork, &langwell->work);
-
- return 0;
-
-err:
- if (the_transceiver)
- langwell_otg_remove(pdev);
-done:
- return retval;
-}
-
-static void langwell_otg_remove(struct pci_dev *pdev)
-{
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- if (langwell->qwork) {
- flush_workqueue(langwell->qwork);
- destroy_workqueue(langwell->qwork);
- }
- langwell_otg_free_timers();
-
- /* disable OTGSC interrupt as OTGSC doesn't change in reset */
- writel(0, langwell->regs + CI_OTGSC);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
- if (langwell->regs)
- iounmap(langwell->regs);
- if (langwell->region)
- release_mem_region(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- otg_set_transceiver(NULL);
- pci_disable_device(pdev);
- sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group);
- device_remove_file(&pdev->dev, &dev_attr_hsm);
- device_remove_file(&pdev->dev, &dev_attr_registers);
- kfree(langwell);
- langwell = NULL;
-}
-
-static void transceiver_suspend(struct pci_dev *pdev)
-{
- pci_save_state(pdev);
- pci_set_power_state(pdev, PCI_D3hot);
- langwell_otg_phy_low_power(1);
-}
-
-static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- /* Disbale OTG interrupts */
- langwell_otg_intr(0);
-
- if (pdev->irq)
- free_irq(pdev->irq, langwell);
-
- /* Prevent more otg_work */
- flush_workqueue(langwell->qwork);
- spin_lock(&langwell->wq_lock);
-
- /* start actions */
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_VRISE:
- langwell_otg_del_timer(a_wait_vrise_tmr);
- langwell->hsm.a_srp_det = 0;
- langwell_otg_drv_vbus(0);
- langwell->otg.state = OTG_STATE_A_IDLE;
- transceiver_suspend(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_del_timer(a_wait_bcon_tmr);
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- break;
- case OTG_STATE_A_HOST:
- if (langwell->host_ops)
- ret = langwell->host_ops->suspend(pdev, message);
- langwell_otg_drv_vbus(0);
- langwell_otg_phy_low_power(1);
- break;
- case OTG_STATE_A_SUSPEND:
- langwell_otg_del_timer(a_aidl_bdis_tmr);
- langwell_otg_HABA(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_A_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- langwell_otg_drv_vbus(0);
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_A_WAIT_VFALL;
- break;
- case OTG_STATE_B_HOST:
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- transceiver_suspend(pdev);
- langwell->otg.state = OTG_STATE_B_IDLE;
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->suspend(pdev, message);
- else
- otg_dbg("client driver has been removed.\n");
- break;
- case OTG_STATE_B_WAIT_ACON:
- langwell_otg_del_timer(b_ase0_brst_tmr);
- langwell_otg_HAAR(0);
- if (langwell->host_ops)
- langwell->host_ops->remove(pdev);
- else
- otg_dbg("host driver has been removed.\n");
- langwell->hsm.b_bus_req = 0;
- langwell->otg.state = OTG_STATE_B_IDLE;
- transceiver_suspend(pdev);
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
- spin_unlock(&langwell->wq_lock);
-
- return ret;
-}
-
-static void transceiver_resume(struct pci_dev *pdev)
-{
- pci_restore_state(pdev);
- pci_set_power_state(pdev, PCI_D0);
- langwell_otg_phy_low_power(0);
-}
-
-static int langwell_otg_resume(struct pci_dev *pdev)
-{
- int ret = 0;
- struct langwell_otg *langwell;
-
- langwell = the_transceiver;
-
- spin_lock(&langwell->wq_lock);
-
- switch (langwell->otg.state) {
- case OTG_STATE_A_IDLE:
- case OTG_STATE_B_IDLE:
- case OTG_STATE_A_WAIT_VFALL:
- case OTG_STATE_A_VBUS_ERR:
- transceiver_resume(pdev);
- break;
- case OTG_STATE_A_WAIT_BCON:
- langwell_otg_add_timer(a_wait_bcon_tmr);
- langwell_otg_drv_vbus(1);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_A_HOST:
- langwell_otg_drv_vbus(1);
- langwell_otg_phy_low_power(0);
- if (langwell->host_ops)
- ret = langwell->host_ops->resume(pdev);
- break;
- case OTG_STATE_B_PERIPHERAL:
- if (langwell->client_ops)
- ret = langwell->client_ops->resume(pdev);
- else
- otg_dbg("client driver not loaded.\n");
- break;
- default:
- otg_dbg("error state before suspend\n ");
- break;
- }
-
- if (request_irq(pdev->irq, otg_irq, IRQF_SHARED,
- driver_name, the_transceiver) != 0) {
- otg_dbg("request interrupt %d failed\n", pdev->irq);
- ret = -EBUSY;
- }
-
- /* enable OTG interrupts */
- langwell_otg_intr(1);
-
- spin_unlock(&langwell->wq_lock);
-
- queue_work(langwell->qwork, &langwell->work);
-
-
- return ret;
-}
-
-static int __init langwell_otg_init(void)
-{
- return pci_register_driver(&otg_pci_driver);
-}
-module_init(langwell_otg_init);
-
-static void __exit langwell_otg_cleanup(void)
-{
- pci_unregister_driver(&otg_pci_driver);
-}
-module_exit(langwell_otg_cleanup);
diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c
index 9ed5ea568679..af456b48985f 100644
--- a/drivers/usb/otg/nop-usb-xceiv.c
+++ b/drivers/usb/otg/nop-usb-xceiv.c
@@ -53,6 +53,7 @@ EXPORT_SYMBOL(usb_nop_xceiv_register);
void usb_nop_xceiv_unregister(void)
{
platform_device_unregister(pd);
+ pd = NULL;
}
EXPORT_SYMBOL(usb_nop_xceiv_unregister);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 247b61bfb7f4..0e4f2e41ace5 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -169,9 +169,11 @@ static int usb_console_setup(struct console *co, char *options)
kfree(tty);
}
}
- /* So we know not to kill the hardware on a hangup on this
- port. We have also bumped the use count by one so it won't go
- idle */
+ /* Now that any required fake tty operations are completed restore
+ * the tty port count */
+ --port->port.count;
+ /* The console is special in terms of closing the device so
+ * indicate this port is now acting as a system console. */
port->console = 1;
retval = 0;
@@ -204,7 +206,7 @@ static void usb_console_write(struct console *co,
dbg("%s - port %d, %d byte(s)", __func__, port->number, count);
- if (!port->port.count) {
+ if (!port->console) {
dbg("%s - port not opened", __func__);
return;
}
@@ -300,8 +302,7 @@ void usb_serial_console_exit(void)
{
if (usbcons_info.port) {
unregister_console(&usbcons);
- if (usbcons_info.port->port.count)
- usbcons_info.port->port.count--;
+ usbcons_info.port->console = 0;
usbcons_info.port = NULL;
}
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 2b9eeda62bfe..985cbcf48bda 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -67,6 +67,8 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
{ USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
{ USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
{ USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
{ USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
{ USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
@@ -78,6 +80,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
@@ -94,7 +97,9 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 9734085fd2fe..59adfe123110 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1228,8 +1228,8 @@ static void cypress_read_int_callback(struct urb *urb)
/* precursor to disconnect so just go away */
return;
case -EPIPE:
- usb_clear_halt(port->serial->dev, 0x81);
- break;
+ /* Can't call usb_clear_halt while in_interrupt */
+ /* FALLS THROUGH */
default:
/* something ugly is going on... */
dev_err(&urb->dev->dev,
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5f08702f672f..b574878c78b2 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -33,6 +33,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -107,6 +108,7 @@ struct ftdi_sio_quirk {
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
+static int ftdi_NDI_device_setup(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -118,6 +120,10 @@ static struct ftdi_sio_quirk ftdi_mtxorb_hack_quirk = {
.probe = ftdi_mtxorb_hack_setup,
};
+static struct ftdi_sio_quirk ftdi_NDI_device_quirk = {
+ .probe = ftdi_NDI_device_setup,
+};
+
static struct ftdi_sio_quirk ftdi_USB_UIRT_quirk = {
.port_probe = ftdi_USB_UIRT_setup,
};
@@ -191,6 +197,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
@@ -579,6 +586,9 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU20_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSICDU40_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CCSMACHX_2_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSLOAD_N_GO_3_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSICDU64_4_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_CCSPRIME8_5_PID) },
{ USB_DEVICE(FTDI_VID, INSIDE_ACCESSO) },
{ USB_DEVICE(INTREPID_VID, INTREPID_VALUECAN_PID) },
{ USB_DEVICE(INTREPID_VID, INTREPID_NEOVI_PID) },
@@ -644,6 +654,16 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13S_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TACTRIX_OPENPORT_13U_PID) },
{ USB_DEVICE(ELEKTOR_VID, ELEKTOR_FT323R_PID) },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_SPECTRA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_2_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_FUTURE_3_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
@@ -660,6 +680,8 @@ static struct usb_device_id id_table_combined [] = {
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, LMI_LM3S_EVAL_BOARD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(FTDI_VID, FTDI_TURTELIZER_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
@@ -667,7 +689,6 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
{ USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) },
{ USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) },
- { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) },
{ USB_DEVICE(ATMEL_VID, STK541_PID) },
{ USB_DEVICE(DE_VID, STB_PID) },
{ USB_DEVICE(DE_VID, WHT_PID) },
@@ -677,6 +698,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+ { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1023,6 +1045,16 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
case FT2232C: /* FT2232C chip */
case FT232RL:
if (baud <= 3000000) {
+ __u16 product_id = le16_to_cpu(
+ port->serial->dev->descriptor.idProduct);
+ if (((FTDI_NDI_HUC_PID == product_id) ||
+ (FTDI_NDI_SPECTRA_SCU_PID == product_id) ||
+ (FTDI_NDI_FUTURE_2_PID == product_id) ||
+ (FTDI_NDI_FUTURE_3_PID == product_id) ||
+ (FTDI_NDI_AURORA_SCU_PID == product_id)) &&
+ (baud == 19200)) {
+ baud = 1200000;
+ }
div_value = ftdi_232bm_baud_to_divisor(baud);
} else {
dbg("%s - Baud rate too high!", __func__);
@@ -1554,6 +1586,39 @@ static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv)
} /* ftdi_HE_TIRA1_setup */
/*
+ * Module parameter to control latency timer for NDI FTDI-based USB devices.
+ * If this value is not set in modprobe.conf.local its value will be set to 1ms.
+ */
+static int ndi_latency_timer = 1;
+
+/* Setup for the NDI FTDI-based USB devices, which requires hardwired
+ * baudrate (19200 gets mapped to 1200000).
+ *
+ * Called from usbserial:serial_probe.
+ */
+static int ftdi_NDI_device_setup(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ int latency = ndi_latency_timer;
+ int rv = 0;
+ char buf[1];
+
+ if (latency == 0)
+ latency = 1;
+ if (latency > 99)
+ latency = 99;
+
+ dbg("%s setting NDI device latency to %d", __func__, latency);
+ dev_info(&udev->dev, "NDI device with a latency value of %d", latency);
+
+ rv = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
+ FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
+ latency, 0, buf, 0, WDR_TIMEOUT);
+ return 0;
+}
+
+/*
* First port on JTAG adaptors such as Olimex arm-usb-ocd or the FIC/OpenMoko
* Neo1973 Debug Board is reserved for JTAG interface and can be accessed from
* userspace using openocd.
@@ -2622,3 +2687,5 @@ MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
module_param(product, ushort, 0);
MODULE_PARM_DESC(product, "User specified product ID");
+module_param(ndi_latency_timer, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(ndi_latency_timer, "NDI device latency timer override");
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index f1d440a728a3..24dbd99e87d7 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -506,6 +506,7 @@
*
* Armin Laeuger originally sent the PID for the UM 100 module.
*/
+#define FTDI_R2000KU_TRUE_RNG 0xFB80 /* R2000KU TRUE RNG */
#define FTDI_ELV_UR100_PID 0xFB58 /* USB-RS232-Umsetzer (UR 100) */
#define FTDI_ELV_UM100_PID 0xFB5A /* USB-Modul UM 100 */
#define FTDI_ELV_UO100_PID 0xFB5B /* USB-Modul UO 100 */
@@ -614,6 +615,9 @@
#define FTDI_CCSICDU20_0_PID 0xF9D0
#define FTDI_CCSICDU40_1_PID 0xF9D1
#define FTDI_CCSMACHX_2_PID 0xF9D2
+#define FTDI_CCSLOAD_N_GO_3_PID 0xF9D3
+#define FTDI_CCSICDU64_4_PID 0xF9D4
+#define FTDI_CCSPRIME8_5_PID 0xF9D5
/* Inside Accesso contactless reader (http://www.insidefr.com) */
#define INSIDE_ACCESSO 0xFAD0
@@ -736,6 +740,15 @@
#define FTDI_PYRAMID_PID 0xE6C8 /* Pyramid Appliance Display */
/*
+ * NDI (www.ndigital.com) product ids
+ */
+#define FTDI_NDI_HUC_PID 0xDA70 /* NDI Host USB Converter */
+#define FTDI_NDI_SPECTRA_SCU_PID 0xDA71 /* NDI Spectra SCU */
+#define FTDI_NDI_FUTURE_2_PID 0xDA72 /* NDI future device #2 */
+#define FTDI_NDI_FUTURE_3_PID 0xDA73 /* NDI future device #3 */
+#define FTDI_NDI_AURORA_SCU_PID 0xDA74 /* NDI Aurora SCU */
+
+/*
* Posiflex inc retail equipment (http://www.posiflex.com.tw)
*/
#define POSIFLEX_VID 0x0d3a /* Vendor ID */
@@ -848,9 +861,6 @@
#define TML_VID 0x1B91 /* Vendor ID */
#define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */
-/* NDI Polaris System */
-#define FTDI_NDI_HUC_PID 0xDA70
-
/* Propox devices */
#define FTDI_PROPOX_JTAGCABLEII_PID 0xD738
@@ -934,6 +944,15 @@
#define MARVELL_VID 0x9e88
#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+#define FTDI_TURTELIZER_PID 0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
+
+/*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID 0x0c33 /* Vendor ID */
+#define AURICAL_USB_PID 0x0010 /* Aurical USB Audiometer */
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index bfc5ce000ef9..ccd4dd340d2c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -521,7 +521,7 @@ static int mos7720_chars_in_buffer(struct tty_struct *tty)
mos7720_port = usb_get_serial_port_data(port);
if (mos7720_port == NULL) {
dbg("%s:leaving ...........", __func__);
- return -ENODEV;
+ return 0;
}
for (i = 0; i < NUM_URBS; ++i) {
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c40f95c1951c..270009afdf77 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -26,6 +26,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -123,10 +124,13 @@
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- * - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
#define USB_VENDOR_ID_ATENINTL 0x0557
#define ATENINTL_DEVICE_ID_UC2324 0x2011
+#define ATENINTL_DEVICE_ID_UC2322 0x7820
/* Interrupt Routine Defines */
@@ -176,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
@@ -185,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
{} /* terminating entry */
};
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 575816e6ba37..c784ddbe7b61 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -66,8 +66,10 @@ static int option_tiocmget(struct tty_struct *tty, struct file *file);
static int option_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
static int option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message);
static int option_resume(struct usb_serial *serial);
+#endif
/* Vendor and product IDs */
#define OPTION_VENDOR_ID 0x0AF0
@@ -205,7 +207,9 @@ static int option_resume(struct usb_serial *serial);
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
#define NOVATELWIRELESS_PRODUCT_U727 0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW 0x5100
#define NOVATELWIRELESS_PRODUCT_MC760 0x6000
+#define NOVATELWIRELESS_PRODUCT_OVMC760 0x6002
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001
@@ -258,11 +262,6 @@ static int option_resume(struct usb_serial *serial);
#define AXESSTEL_VENDOR_ID 0x1726
#define AXESSTEL_PRODUCT_MV110H 0x1000
-#define ONDA_VENDOR_ID 0x19d2
-#define ONDA_PRODUCT_MSA501HS 0x0001
-#define ONDA_PRODUCT_ET502HS 0x0002
-#define ONDA_PRODUCT_MT503HS 0x2000
-
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
@@ -300,6 +299,7 @@ static int option_resume(struct usb_serial *serial);
#define ZTE_PRODUCT_MF628 0x0015
#define ZTE_PRODUCT_MF626 0x0031
#define ZTE_PRODUCT_CDMA_TECH 0xfffe
+#define ZTE_PRODUCT_AC8710 0xfff1
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
@@ -307,11 +307,25 @@ static int option_resume(struct usb_serial *serial);
#define DLINK_VENDOR_ID 0x1186
#define DLINK_PRODUCT_DWM_652 0x3e04
+#define QISDA_VENDOR_ID 0x1da5
+#define QISDA_PRODUCT_H21_4512 0x4512
+#define QISDA_PRODUCT_H21_4523 0x4523
+#define QISDA_PRODUCT_H20_4515 0x4515
+#define QISDA_PRODUCT_H20_4519 0x4519
+
/* TOSHIBA PRODUCTS */
#define TOSHIBA_VENDOR_ID 0x0930
#define TOSHIBA_PRODUCT_HSDPA_MINICARD 0x1302
+#define ALINK_VENDOR_ID 0x1e0e
+#define ALINK_PRODUCT_3GU 0x9200
+
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID 0x1bbb
+#define ALCATEL_PRODUCT_X060S 0x0000
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -428,8 +442,10 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
+ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */
@@ -463,42 +479,6 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
- { USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
- { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
@@ -523,14 +503,85 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
- { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
- { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) },
+ { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) },
{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
+ { USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
+ { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
@@ -539,8 +590,10 @@ static struct usb_driver option_driver = {
.name = "option",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
+#endif
.id_table = option_ids,
.no_dynamic_id = 1,
};
@@ -572,8 +625,10 @@ static struct usb_serial_driver option_1port_device = {
.disconnect = option_disconnect,
.release = option_release,
.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
.suspend = option_suspend,
.resume = option_resume,
+#endif
};
static int debug;
@@ -732,7 +787,6 @@ static int option_write(struct tty_struct *tty, struct usb_serial_port *port,
memcpy(this_urb->transfer_buffer, buf, todo);
this_urb->transfer_buffer_length = todo;
- this_urb->dev = port->serial->dev;
err = usb_submit_urb(this_urb, GFP_ATOMIC);
if (err) {
dbg("usb_submit_urb %p (write bulk) failed "
@@ -816,7 +870,6 @@ static void option_instat_callback(struct urb *urb)
int status = urb->status;
struct usb_serial_port *port = urb->context;
struct option_port_private *portdata = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
dbg("%s", __func__);
dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -860,7 +913,6 @@ static void option_instat_callback(struct urb *urb)
/* Resubmit urb so we continue receiving IRQ data */
if (status != -ESHUTDOWN && status != -ENOENT) {
- urb->dev = serial->dev;
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err)
dbg("%s: resubmit intr urb failed. (%d)",
@@ -913,7 +965,6 @@ static int option_open(struct tty_struct *tty,
struct usb_serial_port *port, struct file *filp)
{
struct option_port_private *portdata;
- struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
@@ -921,23 +972,11 @@ static int option_open(struct tty_struct *tty,
dbg("%s", __func__);
- /* Reset low level data toggle and start reading from endpoints */
+ /* Start reading from the IN endpoint */
for (i = 0; i < N_IN_URB; i++) {
urb = portdata->in_urbs[i];
if (!urb)
continue;
- if (urb->dev != serial->dev) {
- dbg("%s: dev %p != %p", __func__,
- urb->dev, serial->dev);
- continue;
- }
-
- /*
- * make sure endpoint data toggle is synchronized with the
- * device
- */
- usb_clear_halt(urb->dev, urb->pipe);
-
err = usb_submit_urb(urb, GFP_KERNEL);
if (err) {
dbg("%s: submit urb %d failed (%d) %d",
@@ -946,16 +985,6 @@ static int option_open(struct tty_struct *tty,
}
}
- /* Reset low level data toggle on out endpoints */
- for (i = 0; i < N_OUT_URB; i++) {
- urb = portdata->out_urbs[i];
- if (!urb)
- continue;
- urb->dev = serial->dev;
- /* usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
- usb_pipeout(urb->pipe), 0); */
- }
-
option_send_setup(port);
return 0;
@@ -1195,6 +1224,7 @@ static void option_release(struct usb_serial *serial)
}
}
+#ifdef CONFIG_PM
static int option_suspend(struct usb_serial *serial, pm_message_t message)
{
dbg("%s entered", __func__);
@@ -1218,7 +1248,6 @@ static int option_resume(struct usb_serial *serial)
dbg("%s: No interrupt URB for port %d\n", __func__, i);
continue;
}
- port->interrupt_in_urb->dev = serial->dev;
err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
dbg("Submitted interrupt URB for port %d (result %d)", i, err);
if (err < 0) {
@@ -1254,6 +1283,7 @@ static int option_resume(struct usb_serial *serial)
}
return 0;
}
+#endif
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index efaf59c4f5d0..7d15bfa7c2db 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -94,6 +94,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
+ { USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 1d7a22e3a9fd..12aac7d2462d 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -122,3 +122,7 @@
/* Hewlett-Packard LD220-HP POS Pole Display */
#define HP_VENDOR_ID 0x03f0
#define HP_LD220_PRODUCT_ID 0x3524
+
+/* Cressi Edy (diving computer) PC interface */
+#define CRESSI_VENDOR_ID 0x04b8
+#define CRESSI_EDY_PRODUCT_ID 0x0521
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 032f7aeb40a4..f48d05e0acc1 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -181,35 +181,50 @@ static const struct sierra_iface_info direct_ip_interface_blacklist = {
};
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
+ { USB_DEVICE(0x03F0, 0x1B1D) }, /* HP ev2200 a.k.a MC5720 */
+ { USB_DEVICE(0x03F0, 0x1E1D) }, /* HP hs2300 a.k.a MC8775 */
+
{ USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
- { USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0220) }, /* Sierra Wireless MC5725 */
+ { USB_DEVICE(0x1199, 0x0022) }, /* Sierra Wireless EM5725 */
+ { USB_DEVICE(0x1199, 0x0024) }, /* Sierra Wireless MC5727 */
+ { USB_DEVICE(0x1199, 0x0224) }, /* Sierra Wireless MC5727 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
{ USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
+ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
{ USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */
- /* Sierra Wireless C597 */
+ /* Sierra Wireless C597 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) },
- /* Sierra Wireless Device */
+ /* Sierra Wireless T598 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
- { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
- { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
+ { USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless T11 */
+ { USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless AC402 */
+ { USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless MC5728 */
+ { USB_DEVICE(0x1199, 0x0029) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6805) }, /* Sierra Wireless MC8765 */
+ { USB_DEVICE(0x1199, 0x6808) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6809) }, /* Sierra Wireless MC8765 */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 & AC 875U */
- { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 (Lenovo) */
+ { USB_DEVICE(0x1199, 0x6813) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6815) }, /* Sierra Wireless MC8775 */
- { USB_DEVICE(0x03f0, 0x1e1d) }, /* HP hs2300 a.k.a MC8775 */
+ { USB_DEVICE(0x1199, 0x6816) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ USB_DEVICE(0x1199, 0x6821) }, /* Sierra Wireless AirCard 875U */
+ { USB_DEVICE(0x1199, 0x6822) }, /* Sierra Wireless AirCard 875E */
{ USB_DEVICE(0x1199, 0x6832) }, /* Sierra Wireless MC8780 */
{ USB_DEVICE(0x1199, 0x6833) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6834) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6835) }, /* Sierra Wireless MC8781 */
+ { USB_DEVICE(0x1199, 0x6838) }, /* Sierra Wireless MC8780 */
+ { USB_DEVICE(0x1199, 0x6839) }, /* Sierra Wireless MC8781 */
{ USB_DEVICE(0x1199, 0x683A) }, /* Sierra Wireless MC8785 */
{ USB_DEVICE(0x1199, 0x683B) }, /* Sierra Wireless MC8785 Composite */
/* Sierra Wireless MC8790, MC8791, MC8792 Composite */
@@ -227,16 +242,13 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x685A) }, /* Sierra Wireless AirCard 885 E */
/* Sierra Wireless C885 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6880, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C888, Air Card 501, USB 303, USB 304 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless C22/C33 */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
- /* Sierra Wireless Device */
+ /* Sierra Wireless HSPA Non-Composite Device */
{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
-
- { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
- { USB_DEVICE(0x0F3D, 0x0112) }, /* Airprime/Sierra PC 5220 */
-
+ { USB_DEVICE(0x1199, 0x6893) }, /* Sierra Wireless Device */
{ USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */
.driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist
},
@@ -814,7 +826,7 @@ static int sierra_startup(struct usb_serial *serial)
return 0;
}
-static void sierra_disconnect(struct usb_serial *serial)
+static void sierra_release(struct usb_serial *serial)
{
int i;
struct usb_serial_port *port;
@@ -830,7 +842,6 @@ static void sierra_disconnect(struct usb_serial *serial)
if (!portdata)
continue;
kfree(portdata);
- usb_set_serial_port_data(port, NULL);
}
}
@@ -853,7 +864,7 @@ static struct usb_serial_driver sierra_device = {
.tiocmget = sierra_tiocmget,
.tiocmset = sierra_tiocmset,
.attach = sierra_startup,
- .disconnect = sierra_disconnect,
+ .release = sierra_release,
.read_int_callback = sierra_instat_callback,
};
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 991d8232e376..3bc609fe2242 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -191,7 +191,6 @@ static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = {
{ USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) },
{ USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) },
- { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) },
};
static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = {
@@ -728,7 +727,7 @@ static int ti_write_room(struct tty_struct *tty)
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
room = ti_buf_space_avail(tport->tp_write_buf);
@@ -749,7 +748,7 @@ static int ti_chars_in_buffer(struct tty_struct *tty)
dbg("%s - port %d", __func__, port->number);
if (tport == NULL)
- return -ENODEV;
+ return 0;
spin_lock_irqsave(&tport->tp_lock, flags);
chars = ti_buf_data_avail(tport->tp_write_buf);
@@ -1658,7 +1657,7 @@ static int ti_do_download(struct usb_device *dev, int pipe,
u8 cs = 0;
int done;
struct ti_firmware_header *header;
- int status;
+ int status = 0;
int len;
for (pos = sizeof(struct ti_firmware_header); pos < size; pos++)
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index a84216464ca0..99188c92068b 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -21,6 +21,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
@@ -31,6 +32,7 @@
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/uaccess.h>
+#include <linux/serial.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "pl2303.h"
@@ -183,6 +185,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
struct usb_serial_port *port;
unsigned int portNumber;
int retval = 0;
+ int first = 0;
dbg("%s", __func__);
@@ -220,8 +223,9 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
tty->driver_data = port;
tty_port_tty_set(&port->port, tty);
- if (port->port.count == 1) {
-
+ /* If the console is attached, the device is already open */
+ if (port->port.count == 1 && !port->console) {
+ first = 1;
/* lock this module before we call it
* this may fail, which means we must bail out,
* safe because we are called with BKL held */
@@ -244,13 +248,21 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
if (retval)
goto bailout_interface_put;
mutex_unlock(&serial->disc_mutex);
+ set_bit(ASYNCB_INITIALIZED, &port->port.flags);
}
mutex_unlock(&port->mutex);
/* Now do the correct tty layer semantics */
retval = tty_port_block_til_ready(&port->port, tty, filp);
- if (retval == 0)
+ if (retval == 0) {
+ if (!first)
+ usb_serial_put(serial);
return 0;
-
+ }
+ mutex_lock(&port->mutex);
+ if (first == 0)
+ goto bailout_mutex_unlock;
+ /* Undo the initial port actions */
+ mutex_lock(&serial->disc_mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
@@ -338,6 +350,22 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
dbg("%s - port %d", __func__, port->number);
+ /* FIXME:
+ This leaves a very narrow race. Really we should do the
+ serial_do_free() on tty->shutdown(), but tty->shutdown can
+ be called from IRQ context and serial_do_free can sleep.
+
+ The right fix is probably to make the tty free (which is rare)
+ and thus tty->shutdown() occur via a work queue and simplify all
+ the drivers that use it.
+ */
+ if (tty_hung_up_p(filp)) {
+ /* serial_hangup already called serial_down at this point.
+ Another user may have already reopened the port but
+ serial_do_free is refcounted */
+ serial_do_free(port);
+ return;
+ }
if (tty_port_close_start(&port->port, tty, filp) == 0)
return;
@@ -353,7 +381,8 @@ static void serial_hangup(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
serial_do_down(port);
tty_port_hangup(&port->port);
- serial_do_free(port);
+ /* We must not free port yet - the USB serial layer depends on it's
+ continued existence */
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -392,7 +421,6 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
struct usb_serial_port *port = tty->driver_data;
dbg("%s = port %d", __func__, port->number);
- WARN_ON(!port->port.count);
/* if the device was unplugged then any remaining characters
fell out of the connector ;) */
if (port->serial->disconnected)
diff --git a/drivers/usb/storage/option_ms.c b/drivers/usb/storage/option_ms.c
index d41cc0a970f7..773a5cd38c5a 100644
--- a/drivers/usb/storage/option_ms.c
+++ b/drivers/usb/storage/option_ms.c
@@ -118,6 +118,9 @@ static int option_inquiry(struct us_data *us)
result = memcmp(buffer+8, "Option", 6);
+ if (result != 0)
+ result = memcmp(buffer+8, "ZCOPTION", 8);
+
/* Read the CSW */
usb_stor_bulk_transfer_buf(us,
us->recv_bulk_pipe,
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcb320217218..e20dc525d177 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
US_BULK_GET_MAX_LUN,
USB_DIR_IN | USB_TYPE_CLASS |
USB_RECIP_INTERFACE,
- 0, us->ifnum, us->iobuf, 1, HZ);
+ 0, us->ifnum, us->iobuf, 1, 10*HZ);
US_DEBUGP("GetMaxLUN command result is %d, data is %d\n",
result, us->iobuf[0]);