summaryrefslogtreecommitdiffstats
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/chipidea/ci_hdrc_pci.c4
-rw-r--r--drivers/usb/chipidea/debug.c3
-rw-r--r--drivers/usb/chipidea/otg.c2
-rw-r--r--drivers/usb/core/hub.c8
-rw-r--r--drivers/usb/dwc2/Kconfig1
-rw-r--r--drivers/usb/dwc2/core.c6
-rw-r--r--drivers/usb/dwc2/hcd_ddma.c23
-rw-r--r--drivers/usb/dwc2/hcd_intr.c8
-rw-r--r--drivers/usb/dwc3/core.h1
-rw-r--r--drivers/usb/dwc3/ep0.c5
-rw-r--r--drivers/usb/dwc3/gadget.c70
-rw-r--r--drivers/usb/gadget/legacy/inode.c7
-rw-r--r--drivers/usb/gadget/udc/fsl_qe_udc.c2
-rw-r--r--drivers/usb/gadget/udc/net2280.h15
-rw-r--r--drivers/usb/gadget/udc/udc-core.c3
-rw-r--r--drivers/usb/musb/musb_host.c8
-rw-r--r--drivers/usb/phy/phy-msm-usb.c20
-rw-r--r--drivers/usb/serial/Kconfig16
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/cp210x.c3
-rw-r--r--drivers/usb/serial/mxu11x0.c1006
-rw-r--r--drivers/usb/serial/option.c14
-rw-r--r--drivers/usb/serial/qcserial.c7
23 files changed, 137 insertions, 1096 deletions
diff --git a/drivers/usb/chipidea/ci_hdrc_pci.c b/drivers/usb/chipidea/ci_hdrc_pci.c
index b59195edf636..b635ab67490d 100644
--- a/drivers/usb/chipidea/ci_hdrc_pci.c
+++ b/drivers/usb/chipidea/ci_hdrc_pci.c
@@ -85,8 +85,8 @@ static int ci_hdrc_pci_probe(struct pci_dev *pdev,
/* register a nop PHY */
ci->phy = usb_phy_generic_register();
- if (!ci->phy)
- return -ENOMEM;
+ if (IS_ERR(ci->phy))
+ return PTR_ERR(ci->phy);
memset(res, 0, sizeof(res));
res[0].start = pci_resource_start(pdev, 0);
diff --git a/drivers/usb/chipidea/debug.c b/drivers/usb/chipidea/debug.c
index a4f7db2e18dd..df47110bad2d 100644
--- a/drivers/usb/chipidea/debug.c
+++ b/drivers/usb/chipidea/debug.c
@@ -100,6 +100,9 @@ static ssize_t ci_port_test_write(struct file *file, const char __user *ubuf,
if (sscanf(buf, "%u", &mode) != 1)
return -EINVAL;
+ if (mode > 255)
+ return -EBADRQC;
+
pm_runtime_get_sync(ci->dev);
spin_lock_irqsave(&ci->lock, flags);
ret = hw_port_test_set(ci, mode);
diff --git a/drivers/usb/chipidea/otg.c b/drivers/usb/chipidea/otg.c
index 45f86da1d6d3..03b6743461d1 100644
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -158,7 +158,7 @@ static void ci_otg_work(struct work_struct *work)
int ci_hdrc_otg_init(struct ci_hdrc *ci)
{
INIT_WORK(&ci->work, ci_otg_work);
- ci->wq = create_singlethread_workqueue("ci_otg");
+ ci->wq = create_freezable_workqueue("ci_otg");
if (!ci->wq) {
dev_err(ci->dev, "can't create workqueue\n");
return -ENODEV;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 350dcd9af5d8..51b436918f78 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -5401,6 +5401,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
}
bos = udev->bos;
+ udev->bos = NULL;
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -5493,11 +5494,8 @@ done:
usb_set_usb2_hardware_lpm(udev, 1);
usb_unlocked_enable_lpm(udev);
usb_enable_ltm(udev);
- /* release the new BOS descriptor allocated by hub_port_init() */
- if (udev->bos != bos) {
- usb_release_bos_descriptor(udev);
- udev->bos = bos;
- }
+ usb_release_bos_descriptor(udev);
+ udev->bos = bos;
return 0;
re_enumerate:
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
index fd95ba6ec317..f0decc0d69b5 100644
--- a/drivers/usb/dwc2/Kconfig
+++ b/drivers/usb/dwc2/Kconfig
@@ -1,5 +1,6 @@
config USB_DWC2
tristate "DesignWare USB2 DRD Core Support"
+ depends on HAS_DMA
depends on USB || USB_GADGET
help
Say Y here if your system has a Dual Role Hi-Speed USB
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index e991d55914db..46c4ba75dc2a 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -619,6 +619,12 @@ void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
__func__, hsotg->dr_mode);
break;
}
+
+ /*
+ * NOTE: This is required for some rockchip soc based
+ * platforms.
+ */
+ msleep(50);
}
/*
diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c
index 36606fc33c0d..a41274aa52ad 100644
--- a/drivers/usb/dwc2/hcd_ddma.c
+++ b/drivers/usb/dwc2/hcd_ddma.c
@@ -1174,14 +1174,11 @@ static int dwc2_process_non_isoc_desc(struct dwc2_hsotg *hsotg,
failed = dwc2_update_non_isoc_urb_state_ddma(hsotg, chan, qtd, dma_desc,
halt_status, n_bytes,
xfer_done);
- if (*xfer_done && urb->status != -EINPROGRESS)
- failed = 1;
-
- if (failed) {
+ if (failed || (*xfer_done && urb->status != -EINPROGRESS)) {
dwc2_host_complete(hsotg, qtd, urb->status);
dwc2_hcd_qtd_unlink_and_free(hsotg, qtd, qh);
- dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x status=%08x\n",
- failed, *xfer_done, urb->status);
+ dev_vdbg(hsotg->dev, "failed=%1x xfer_done=%1x\n",
+ failed, *xfer_done);
return failed;
}
@@ -1236,21 +1233,23 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
list_for_each_safe(qtd_item, qtd_tmp, &qh->qtd_list) {
int i;
+ int qtd_desc_count;
qtd = list_entry(qtd_item, struct dwc2_qtd, qtd_list_entry);
xfer_done = 0;
+ qtd_desc_count = qtd->n_desc;
- for (i = 0; i < qtd->n_desc; i++) {
+ for (i = 0; i < qtd_desc_count; i++) {
if (dwc2_process_non_isoc_desc(hsotg, chan, chnum, qtd,
desc_num, halt_status,
- &xfer_done)) {
- qtd = NULL;
- break;
- }
+ &xfer_done))
+ goto stop_scan;
+
desc_num++;
}
}
+stop_scan:
if (qh->ep_type != USB_ENDPOINT_XFER_CONTROL) {
/*
* Resetting the data toggle for bulk and interrupt endpoints
@@ -1258,7 +1257,7 @@ static void dwc2_complete_non_isoc_xfer_ddma(struct dwc2_hsotg *hsotg,
*/
if (halt_status == DWC2_HC_XFER_STALL)
qh->data_toggle = DWC2_HC_PID_DATA0;
- else if (qtd)
+ else
dwc2_hcd_save_data_toggle(hsotg, chan, chnum, qtd);
}
diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index f8253803a050..cadba8b13c48 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -525,11 +525,19 @@ void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
u32 pid = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
if (chan->ep_type != USB_ENDPOINT_XFER_CONTROL) {
+ if (WARN(!chan || !chan->qh,
+ "chan->qh must be specified for non-control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
chan->qh->data_toggle = DWC2_HC_PID_DATA0;
else
chan->qh->data_toggle = DWC2_HC_PID_DATA1;
} else {
+ if (WARN(!qtd,
+ "qtd must be specified for control eps\n"))
+ return;
+
if (pid == TSIZ_SC_MC_PID_DATA0)
qtd->data_toggle = DWC2_HC_PID_DATA0;
else
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 29130682e547..e4f8b90d9627 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -856,7 +856,6 @@ struct dwc3 {
unsigned pullups_connected:1;
unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
unsigned usb3_lpm_capable:1;
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 3a9354abcb68..8d6b75c2f53b 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -555,7 +555,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
u32 reg;
- dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
switch (state) {
@@ -737,10 +736,6 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY");
ret = dwc3_ep0_set_isoch_delay(dwc, ctrl);
break;
- case USB_REQ_SET_INTERFACE:
- dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_INTERFACE");
- dwc->start_config_issued = false;
- /* Fall through */
default:
dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver");
ret = dwc3_ep0_delegate_req(dwc, ctrl);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 7d1dd82a95ac..2363bad45af8 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -385,24 +385,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
+
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -516,10 +558,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -1636,8 +1674,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -2237,7 +2273,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2288,7 +2323,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 7e179f81d05c..87fb0fd6aaab 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -130,7 +130,8 @@ struct dev_data {
setup_can_stall : 1,
setup_out_ready : 1,
setup_out_error : 1,
- setup_abort : 1;
+ setup_abort : 1,
+ gadget_registered : 1;
unsigned setup_wLength;
/* the rest is basically write-once */
@@ -1179,7 +1180,8 @@ dev_release (struct inode *inode, struct file *fd)
/* closing ep0 === shutdown all */
- usb_gadget_unregister_driver (&gadgetfs_driver);
+ if (dev->gadget_registered)
+ usb_gadget_unregister_driver (&gadgetfs_driver);
/* at this point "good" hardware has disconnected the
* device from USB; the host won't see it any more.
@@ -1847,6 +1849,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
* kick in after the ep0 descriptor is closed.
*/
value = len;
+ dev->gadget_registered = true;
}
return value;
diff --git a/drivers/usb/gadget/udc/fsl_qe_udc.c b/drivers/usb/gadget/udc/fsl_qe_udc.c
index 53c0692f1b09..93d28cb00b76 100644
--- a/drivers/usb/gadget/udc/fsl_qe_udc.c
+++ b/drivers/usb/gadget/udc/fsl_qe_udc.c
@@ -2340,7 +2340,7 @@ static struct qe_udc *qe_udc_config(struct platform_device *ofdev)
{
struct qe_udc *udc;
struct device_node *np = ofdev->dev.of_node;
- unsigned int tmp_addr = 0;
+ unsigned long tmp_addr = 0;
struct usb_device_para __iomem *usbpram;
unsigned int i;
u64 size;
diff --git a/drivers/usb/gadget/udc/net2280.h b/drivers/usb/gadget/udc/net2280.h
index 4dff60d34f73..0d32052bf16f 100644
--- a/drivers/usb/gadget/udc/net2280.h
+++ b/drivers/usb/gadget/udc/net2280.h
@@ -369,9 +369,20 @@ static inline void set_max_speed(struct net2280_ep *ep, u32 max)
static const u32 ep_enhanced[9] = { 0x10, 0x60, 0x30, 0x80,
0x50, 0x20, 0x70, 0x40, 0x90 };
- if (ep->dev->enhanced_mode)
+ if (ep->dev->enhanced_mode) {
reg = ep_enhanced[ep->num];
- else{
+ switch (ep->dev->gadget.speed) {
+ case USB_SPEED_SUPER:
+ reg += 2;
+ break;
+ case USB_SPEED_FULL:
+ reg += 1;
+ break;
+ case USB_SPEED_HIGH:
+ default:
+ break;
+ }
+ } else {
reg = (ep->num + 1) * 0x10;
if (ep->dev->gadget.speed != USB_SPEED_HIGH)
reg += 1;
diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c
index fd73a3ea07c2..b86a6f03592e 100644
--- a/drivers/usb/gadget/udc/udc-core.c
+++ b/drivers/usb/gadget/udc/udc-core.c
@@ -413,9 +413,10 @@ int usb_add_gadget_udc_release(struct device *parent, struct usb_gadget *gadget,
if (!driver->udc_name || strcmp(driver->udc_name,
dev_name(&udc->dev)) == 0) {
ret = udc_bind_to_driver(udc, driver);
+ if (ret != -EPROBE_DEFER)
+ list_del(&driver->pending);
if (ret)
goto err4;
- list_del(&driver->pending);
break;
}
}
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 795a45b1b25b..58487a473521 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -662,7 +662,7 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma,
csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
}
- channel->desired_mode = mode;
+ channel->desired_mode = *mode;
musb_writew(epio, MUSB_TXCSR, csr);
return 0;
@@ -2003,10 +2003,8 @@ void musb_host_rx(struct musb *musb, u8 epnum)
qh->offset,
urb->transfer_buffer_length);
- done = musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh,
- urb, xfer_len,
- iso_err);
- if (done)
+ if (musb_rx_dma_in_inventra_cppi41(c, hw_ep, qh, urb,
+ xfer_len, iso_err))
goto finish;
else
dev_err(musb->controller, "error: rx_dma failed\n");
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 970a30e155cb..72b387d592c2 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -757,14 +757,8 @@ static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host)
otg->host = host;
dev_dbg(otg->usb_phy->dev, "host driver registered w/ tranceiver\n");
- /*
- * Kick the state machine work, if peripheral is not supported
- * or peripheral is already registered with us.
- */
- if (motg->pdata->mode == USB_DR_MODE_HOST || otg->gadget) {
- pm_runtime_get_sync(otg->usb_phy->dev);
- schedule_work(&motg->sm_work);
- }
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
return 0;
}
@@ -827,14 +821,8 @@ static int msm_otg_set_peripheral(struct usb_otg *otg,
dev_dbg(otg->usb_phy->dev,
"peripheral driver registered w/ tranceiver\n");
- /*
- * Kick the state machine work, if host is not supported
- * or host is already registered with us.
- */
- if (motg->pdata->mode == USB_DR_MODE_PERIPHERAL || otg->host) {
- pm_runtime_get_sync(otg->usb_phy->dev);
- schedule_work(&motg->sm_work);
- }
+ pm_runtime_get_sync(otg->usb_phy->dev);
+ schedule_work(&motg->sm_work);
return 0;
}
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index f612dda9c977..56ecb8b5115d 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -475,22 +475,6 @@ config USB_SERIAL_MOS7840
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
-config USB_SERIAL_MXUPORT11
- tristate "USB Moxa UPORT 11x0 Serial Driver"
- ---help---
- Say Y here if you want to use a MOXA UPort 11x0 Serial hub.
-
- This driver supports:
-
- - UPort 1110 : 1 port RS-232 USB to Serial Hub.
- - UPort 1130 : 1 port RS-422/485 USB to Serial Hub.
- - UPort 1130I : 1 port RS-422/485 USB to Serial Hub with Isolation.
- - UPort 1150 : 1 port RS-232/422/485 USB to Serial Hub.
- - UPort 1150I : 1 port RS-232/422/485 USB to Serial Hub with Isolation.
-
- To compile this driver as a module, choose M here: the
- module will be called mxu11x0.
-
config USB_SERIAL_MXUPORT
tristate "USB Moxa UPORT Serial Driver"
---help---
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index f3fa5e53702d..349d9df0895f 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_USB_SERIAL_METRO) += metro-usb.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
obj-$(CONFIG_USB_SERIAL_MXUPORT) += mxuport.o
-obj-$(CONFIG_USB_SERIAL_MXUPORT11) += mxu11x0.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 987813b8a7f9..73a366de5102 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -163,6 +163,9 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */
+ { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */
+ { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */
+ { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
{ USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
diff --git a/drivers/usb/serial/mxu11x0.c b/drivers/usb/serial/mxu11x0.c
deleted file mode 100644
index 619607323bfd..000000000000
--- a/drivers/usb/serial/mxu11x0.c
+++ /dev/null
@@ -1,1006 +0,0 @@
-/*
- * USB Moxa UPORT 11x0 Serial Driver
- *
- * Copyright (C) 2007 MOXA Technologies Co., Ltd.
- * Copyright (C) 2015 Mathieu Othacehe <m.othacehe@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- *
- * Supports the following Moxa USB to serial converters:
- * UPort 1110, 1 port RS-232 USB to Serial Hub.
- * UPort 1130, 1 port RS-422/485 USB to Serial Hub.
- * UPort 1130I, 1 port RS-422/485 USB to Serial Hub with isolation
- * protection.
- * UPort 1150, 1 port RS-232/422/485 USB to Serial Hub.
- * UPort 1150I, 1 port RS-232/422/485 USB to Serial Hub with isolation
- * protection.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/firmware.h>
-#include <linux/jiffies.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-/* Vendor and product ids */
-#define MXU1_VENDOR_ID 0x110a
-#define MXU1_1110_PRODUCT_ID 0x1110
-#define MXU1_1130_PRODUCT_ID 0x1130
-#define MXU1_1150_PRODUCT_ID 0x1150
-#define MXU1_1151_PRODUCT_ID 0x1151
-#define MXU1_1131_PRODUCT_ID 0x1131
-
-/* Commands */
-#define MXU1_GET_VERSION 0x01
-#define MXU1_GET_PORT_STATUS 0x02
-#define MXU1_GET_PORT_DEV_INFO 0x03
-#define MXU1_GET_CONFIG 0x04
-#define MXU1_SET_CONFIG 0x05
-#define MXU1_OPEN_PORT 0x06
-#define MXU1_CLOSE_PORT 0x07
-#define MXU1_START_PORT 0x08
-#define MXU1_STOP_PORT 0x09
-#define MXU1_TEST_PORT 0x0A
-#define MXU1_PURGE_PORT 0x0B
-#define MXU1_RESET_EXT_DEVICE 0x0C
-#define MXU1_GET_OUTQUEUE 0x0D
-#define MXU1_WRITE_DATA 0x80
-#define MXU1_READ_DATA 0x81
-#define MXU1_REQ_TYPE_CLASS 0x82
-
-/* Module identifiers */
-#define MXU1_I2C_PORT 0x01
-#define MXU1_IEEE1284_PORT 0x02
-#define MXU1_UART1_PORT 0x03
-#define MXU1_UART2_PORT 0x04
-#define MXU1_RAM_PORT 0x05
-
-/* Modem status */
-#define MXU1_MSR_DELTA_CTS 0x01
-#define MXU1_MSR_DELTA_DSR 0x02
-#define MXU1_MSR_DELTA_RI 0x04
-#define MXU1_MSR_DELTA_CD 0x08
-#define MXU1_MSR_CTS 0x10
-#define MXU1_MSR_DSR 0x20
-#define MXU1_MSR_RI 0x40
-#define MXU1_MSR_CD 0x80
-#define MXU1_MSR_DELTA_MASK 0x0F
-#define MXU1_MSR_MASK 0xF0
-
-/* Line status */
-#define MXU1_LSR_OVERRUN_ERROR 0x01
-#define MXU1_LSR_PARITY_ERROR 0x02
-#define MXU1_LSR_FRAMING_ERROR 0x04
-#define MXU1_LSR_BREAK 0x08
-#define MXU1_LSR_ERROR 0x0F
-#define MXU1_LSR_RX_FULL 0x10
-#define MXU1_LSR_TX_EMPTY 0x20
-
-/* Modem control */
-#define MXU1_MCR_LOOP 0x04
-#define MXU1_MCR_DTR 0x10
-#define MXU1_MCR_RTS 0x20
-
-/* Mask settings */
-#define MXU1_UART_ENABLE_RTS_IN 0x0001
-#define MXU1_UART_DISABLE_RTS 0x0002
-#define MXU1_UART_ENABLE_PARITY_CHECKING 0x0008
-#define MXU1_UART_ENABLE_DSR_OUT 0x0010
-#define MXU1_UART_ENABLE_CTS_OUT 0x0020
-#define MXU1_UART_ENABLE_X_OUT 0x0040
-#define MXU1_UART_ENABLE_XA_OUT 0x0080
-#define MXU1_UART_ENABLE_X_IN 0x0100
-#define MXU1_UART_ENABLE_DTR_IN 0x0800
-#define MXU1_UART_DISABLE_DTR 0x1000
-#define MXU1_UART_ENABLE_MS_INTS 0x2000
-#define MXU1_UART_ENABLE_AUTO_START_DMA 0x4000
-#define MXU1_UART_SEND_BREAK_SIGNAL 0x8000
-
-/* Parity */
-#define MXU1_UART_NO_PARITY 0x00
-#define MXU1_UART_ODD_PARITY 0x01
-#define MXU1_UART_EVEN_PARITY 0x02
-#define MXU1_UART_MARK_PARITY 0x03
-#define MXU1_UART_SPACE_PARITY 0x04
-
-/* Stop bits */
-#define MXU1_UART_1_STOP_BITS 0x00
-#define MXU1_UART_1_5_STOP_BITS 0x01
-#define MXU1_UART_2_STOP_BITS 0x02
-
-/* Bits per character */
-#define MXU1_UART_5_DATA_BITS 0x00
-#define MXU1_UART_6_DATA_BITS 0x01
-#define MXU1_UART_7_DATA_BITS 0x02
-#define MXU1_UART_8_DATA_BITS 0x03
-
-/* Operation modes */
-#define MXU1_UART_232 0x00
-#define MXU1_UART_485_RECEIVER_DISABLED 0x01
-#define MXU1_UART_485_RECEIVER_ENABLED 0x02
-
-/* Pipe transfer mode and timeout */
-#define MXU1_PIPE_MODE_CONTINUOUS 0x01
-#define MXU1_PIPE_MODE_MASK 0x03
-#define MXU1_PIPE_TIMEOUT_MASK 0x7C
-#define MXU1_PIPE_TIMEOUT_ENABLE 0x80
-
-/* Config struct */
-struct mxu1_uart_config {
- __be16 wBaudRate;
- __be16 wFlags;
- u8 bDataBits;
- u8 bParity;
- u8 bStopBits;
- char cXon;
- char cXoff;
- u8 bUartMode;
-} __packed;
-
-/* Purge modes */
-#define MXU1_PURGE_OUTPUT 0x00
-#define MXU1_PURGE_INPUT 0x80
-
-/* Read/Write data */
-#define MXU1_RW_DATA_ADDR_SFR 0x10
-#define MXU1_RW_DATA_ADDR_IDATA 0x20
-#define MXU1_RW_DATA_ADDR_XDATA 0x30
-#define MXU1_RW_DATA_ADDR_CODE 0x40
-#define MXU1_RW_DATA_ADDR_GPIO 0x50
-#define MXU1_RW_DATA_ADDR_I2C 0x60
-#define MXU1_RW_DATA_ADDR_FLASH 0x70
-#define MXU1_RW_DATA_ADDR_DSP 0x80
-
-#define MXU1_RW_DATA_UNSPECIFIED 0x00
-#define MXU1_RW_DATA_BYTE 0x01
-#define MXU1_RW_DATA_WORD 0x02
-#define MXU1_RW_DATA_DOUBLE_WORD 0x04
-
-struct mxu1_write_data_bytes {
- u8 bAddrType;
- u8 bDataType;
- u8 bDataCounter;
- __be16 wBaseAddrHi;
- __be16 wBaseAddrLo;
- u8 bData[0];
-} __packed;
-
-/* Interrupt codes */
-#define MXU1_CODE_HARDWARE_ERROR 0xFF
-#define MXU1_CODE_DATA_ERROR 0x03
-#define MXU1_CODE_MODEM_STATUS 0x04
-
-static inline int mxu1_get_func_from_code(unsigned char code)
-{
- return code & 0x0f;
-}
-
-/* Download firmware max packet size */
-#define MXU1_DOWNLOAD_MAX_PACKET_SIZE 64
-
-/* Firmware image header */
-struct mxu1_firmware_header {
- __le16 wLength;
- u8 bCheckSum;
-} __packed;
-
-#define MXU1_UART_BASE_ADDR 0xFFA0
-#define MXU1_UART_OFFSET_MCR 0x0004
-
-#define MXU1_BAUD_BASE 923077
-
-#define MXU1_TRANSFER_TIMEOUT 2
-#define MXU1_DOWNLOAD_TIMEOUT 1000
-#define MXU1_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
-
-struct mxu1_port {
- u8 msr;
- u8 mcr;
- u8 uart_mode;
- spinlock_t spinlock; /* Protects msr */
- struct mutex mutex; /* Protects mcr */
- bool send_break;
-};
-
-struct mxu1_device {
- u16 mxd_model;
-};
-
-static const struct usb_device_id mxu1_idtable[] = {
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1110_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1130_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1150_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1151_PRODUCT_ID) },
- { USB_DEVICE(MXU1_VENDOR_ID, MXU1_1131_PRODUCT_ID) },
- { }
-};
-
-MODULE_DEVICE_TABLE(usb, mxu1_idtable);
-
-/* Write the given buffer out to the control pipe. */
-static int mxu1_send_ctrl_data_urb(struct usb_serial *serial,
- u8 request,
- u16 value, u16 index,
- void *data, size_t size)
-{
- int status;
-
- status = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request,
- (USB_DIR_OUT | USB_TYPE_VENDOR |
- USB_RECIP_DEVICE), value, index,
- data, size,
- USB_CTRL_SET_TIMEOUT);
- if (status < 0) {
- dev_err(&serial->interface->dev,
- "%s - usb_control_msg failed: %d\n",
- __func__, status);
- return status;
- }
-
- if (status != size) {
- dev_err(&serial->interface->dev,
- "%s - short write (%d / %zd)\n",
- __func__, status, size);
- return -EIO;
- }
-
- return 0;
-}
-
-/* Send a vendor request without any data */
-static int mxu1_send_ctrl_urb(struct usb_serial *serial,
- u8 request, u16 value, u16 index)
-{
- return mxu1_send_ctrl_data_urb(serial, request, value, index,
- NULL, 0);
-}
-
-static int mxu1_download_firmware(struct usb_serial *serial,
- const struct firmware *fw_p)
-{
- int status = 0;
- int buffer_size;
- int pos;
- int len;
- int done;
- u8 cs = 0;
- u8 *buffer;
- struct usb_device *dev = serial->dev;
- struct mxu1_firmware_header *header;
- unsigned int pipe;
-
- pipe = usb_sndbulkpipe(dev, serial->port[0]->bulk_out_endpointAddress);
-
- buffer_size = fw_p->size + sizeof(*header);
- buffer = kmalloc(buffer_size, GFP_KERNEL);
- if (!buffer)
- return -ENOMEM;
-
- memcpy(buffer, fw_p->data, fw_p->size);
- memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-
- for (pos = sizeof(*header); pos < buffer_size; pos++)
- cs = (u8)(cs + buffer[pos]);
-
- header = (struct mxu1_firmware_header *)buffer;
- header->wLength = cpu_to_le16(buffer_size - sizeof(*header));
- header->bCheckSum = cs;
-
- dev_dbg(&dev->dev, "%s - downloading firmware\n", __func__);
-
- for (pos = 0; pos < buffer_size; pos += done) {
- len = min(buffer_size - pos, MXU1_DOWNLOAD_MAX_PACKET_SIZE);
-
- status = usb_bulk_msg(dev, pipe, buffer + pos, len, &done,
- MXU1_DOWNLOAD_TIMEOUT);
- if (status)
- break;
- }
-
- kfree(buffer);
-
- if (status) {
- dev_err(&dev->dev, "failed to download firmware: %d\n", status);
- return status;
- }
-
- msleep_interruptible(100);
- usb_reset_device(dev);
-
- dev_dbg(&dev->dev, "%s - download successful\n", __func__);
-
- return 0;
-}
-
-static int mxu1_port_probe(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
- struct mxu1_device *mxdev;
-
- if (!port->interrupt_in_urb) {
- dev_err(&port->dev, "no interrupt urb\n");
- return -ENODEV;
- }
-
- mxport = kzalloc(sizeof(struct mxu1_port), GFP_KERNEL);
- if (!mxport)
- return -ENOMEM;
-
- spin_lock_init(&mxport->spinlock);
- mutex_init(&mxport->mutex);
-
- mxdev = usb_get_serial_data(port->serial);
-
- switch (mxdev->mxd_model) {
- case MXU1_1110_PRODUCT_ID:
- case MXU1_1150_PRODUCT_ID:
- case MXU1_1151_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_232;
- break;
- case MXU1_1130_PRODUCT_ID:
- case MXU1_1131_PRODUCT_ID:
- mxport->uart_mode = MXU1_UART_485_RECEIVER_DISABLED;
- break;
- }
-
- usb_set_serial_port_data(port, mxport);
-
- port->port.closing_wait =
- msecs_to_jiffies(MXU1_DEFAULT_CLOSING_WAIT * 10);
- port->port.drain_delay = 1;
-
- return 0;
-}
-
-static int mxu1_port_remove(struct usb_serial_port *port)
-{
- struct mxu1_port *mxport;
-
- mxport = usb_get_serial_port_data(port);
- kfree(mxport);
-
- return 0;
-}
-
-static int mxu1_startup(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
- struct usb_device *dev = serial->dev;
- struct usb_host_interface *cur_altsetting;
- char fw_name[32];
- const struct firmware *fw_p = NULL;
- int err;
-
- dev_dbg(&serial->interface->dev, "%s - product 0x%04X, num configurations %d, configuration value %d\n",
- __func__, le16_to_cpu(dev->descriptor.idProduct),
- dev->descriptor.bNumConfigurations,
- dev->actconfig->desc.bConfigurationValue);
-
- /* create device structure */
- mxdev = kzalloc(sizeof(struct mxu1_device), GFP_KERNEL);
- if (!mxdev)
- return -ENOMEM;
-
- usb_set_serial_data(serial, mxdev);
-
- mxdev->mxd_model = le16_to_cpu(dev->descriptor.idProduct);
-
- cur_altsetting = serial->interface->cur_altsetting;
-
- /* if we have only 1 configuration, download firmware */
- if (cur_altsetting->desc.bNumEndpoints == 1) {
-
- snprintf(fw_name,
- sizeof(fw_name),
- "moxa/moxa-%04x.fw",
- mxdev->mxd_model);
-
- err = request_firmware(&fw_p, fw_name, &serial->interface->dev);
- if (err) {
- dev_err(&serial->interface->dev, "failed to request firmware: %d\n",
- err);
- goto err_free_mxdev;
- }
-
- err = mxu1_download_firmware(serial, fw_p);
- if (err)
- goto err_release_firmware;
-
- /* device is being reset */
- err = -ENODEV;
- goto err_release_firmware;
- }
-
- return 0;
-
-err_release_firmware:
- release_firmware(fw_p);
-err_free_mxdev:
- kfree(mxdev);
-
- return err;
-}
-
-static void mxu1_release(struct usb_serial *serial)
-{
- struct mxu1_device *mxdev;
-
- mxdev = usb_get_serial_data(serial);
- kfree(mxdev);
-}
-
-static int mxu1_write_byte(struct usb_serial_port *port, u32 addr,
- u8 mask, u8 byte)
-{
- int status;
- size_t size;
- struct mxu1_write_data_bytes *data;
-
- dev_dbg(&port->dev, "%s - addr 0x%08X, mask 0x%02X, byte 0x%02X\n",
- __func__, addr, mask, byte);
-
- size = sizeof(struct mxu1_write_data_bytes) + 2;
- data = kzalloc(size, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- data->bAddrType = MXU1_RW_DATA_ADDR_XDATA;
- data->bDataType = MXU1_RW_DATA_BYTE;
- data->bDataCounter = 1;
- data->wBaseAddrHi = cpu_to_be16(addr >> 16);
- data->wBaseAddrLo = cpu_to_be16(addr);
- data->bData[0] = mask;
- data->bData[1] = byte;
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_WRITE_DATA, 0,
- MXU1_RAM_PORT, data, size);
- if (status < 0)
- dev_err(&port->dev, "%s - failed: %d\n", __func__, status);
-
- kfree(data);
-
- return status;
-}
-
-static int mxu1_set_mcr(struct usb_serial_port *port, unsigned int mcr)
-{
- int status;
-
- status = mxu1_write_byte(port,
- MXU1_UART_BASE_ADDR + MXU1_UART_OFFSET_MCR,
- MXU1_MCR_RTS | MXU1_MCR_DTR | MXU1_MCR_LOOP,
- mcr);
- return status;
-}
-
-static void mxu1_set_termios(struct tty_struct *tty,
- struct usb_serial_port *port,
- struct ktermios *old_termios)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct mxu1_uart_config *config;
- tcflag_t cflag, iflag;
- speed_t baud;
- int status;
- unsigned int mcr;
-
- cflag = tty->termios.c_cflag;
- iflag = tty->termios.c_iflag;
-
- if (old_termios &&
- !tty_termios_hw_change(&tty->termios, old_termios) &&
- tty->termios.c_iflag == old_termios->c_iflag) {
- dev_dbg(&port->dev, "%s - nothing to change\n", __func__);
- return;
- }
-
- dev_dbg(&port->dev,
- "%s - cflag 0x%08x, iflag 0x%08x\n", __func__, cflag, iflag);
-
- if (old_termios) {
- dev_dbg(&port->dev, "%s - old cflag 0x%08x, old iflag 0x%08x\n",
- __func__,
- old_termios->c_cflag,
- old_termios->c_iflag);
- }
-
- config = kzalloc(sizeof(*config), GFP_KERNEL);
- if (!config)
- return;
-
- /* these flags must be set */
- config->wFlags |= MXU1_UART_ENABLE_MS_INTS;
- config->wFlags |= MXU1_UART_ENABLE_AUTO_START_DMA;
- if (mxport->send_break)
- config->wFlags |= MXU1_UART_SEND_BREAK_SIGNAL;
- config->bUartMode = mxport->uart_mode;
-
- switch (C_CSIZE(tty)) {
- case CS5:
- config->bDataBits = MXU1_UART_5_DATA_BITS;
- break;
- case CS6:
- config->bDataBits = MXU1_UART_6_DATA_BITS;
- break;
- case CS7:
- config->bDataBits = MXU1_UART_7_DATA_BITS;
- break;
- default:
- case CS8:
- config->bDataBits = MXU1_UART_8_DATA_BITS;
- break;
- }
-
- if (C_PARENB(tty)) {
- config->wFlags |= MXU1_UART_ENABLE_PARITY_CHECKING;
- if (C_CMSPAR(tty)) {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_MARK_PARITY;
- else
- config->bParity = MXU1_UART_SPACE_PARITY;
- } else {
- if (C_PARODD(tty))
- config->bParity = MXU1_UART_ODD_PARITY;
- else
- config->bParity = MXU1_UART_EVEN_PARITY;
- }
- } else {
- config->bParity = MXU1_UART_NO_PARITY;
- }
-
- if (C_CSTOPB(tty))
- config->bStopBits = MXU1_UART_2_STOP_BITS;
- else
- config->bStopBits = MXU1_UART_1_STOP_BITS;
-
- if (C_CRTSCTS(tty)) {
- /* RTS flow control must be off to drop RTS for baud rate B0 */
- if (C_BAUD(tty) != B0)
- config->wFlags |= MXU1_UART_ENABLE_RTS_IN;
- config->wFlags |= MXU1_UART_ENABLE_CTS_OUT;
- }
-
- if (I_IXOFF(tty) || I_IXON(tty)) {
- config->cXon = START_CHAR(tty);
- config->cXoff = STOP_CHAR(tty);
-
- if (I_IXOFF(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_IN;
-
- if (I_IXON(tty))
- config->wFlags |= MXU1_UART_ENABLE_X_OUT;
- }
-
- baud = tty_get_baud_rate(tty);
- if (!baud)
- baud = 9600;
- config->wBaudRate = MXU1_BAUD_BASE / baud;
-
- dev_dbg(&port->dev, "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n",
- __func__, baud, config->wBaudRate, config->wFlags,
- config->bDataBits, config->bParity, config->bStopBits,
- config->cXon, config->cXoff, config->bUartMode);
-
- cpu_to_be16s(&config->wBaudRate);
- cpu_to_be16s(&config->wFlags);
-
- status = mxu1_send_ctrl_data_urb(port->serial, MXU1_SET_CONFIG, 0,
- MXU1_UART1_PORT, config,
- sizeof(*config));
- if (status)
- dev_err(&port->dev, "cannot set config: %d\n", status);
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (C_BAUD(tty) == B0)
- mcr &= ~(MXU1_MCR_DTR | MXU1_MCR_RTS);
- else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
- mcr |= MXU1_MCR_DTR | MXU1_MCR_RTS;
-
- status = mxu1_set_mcr(port, mcr);
- if (status)
- dev_err(&port->dev, "cannot set modem control: %d\n", status);
- else
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- kfree(config);
-}
-
-static int mxu1_get_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *ret_arg)
-{
- struct serial_struct ret_serial;
- unsigned cwait;
-
- if (!ret_arg)
- return -EFAULT;
-
- cwait = port->port.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = jiffies_to_msecs(cwait) / 10;
-
- memset(&ret_serial, 0, sizeof(ret_serial));
-
- ret_serial.type = PORT_16550A;
- ret_serial.line = port->minor;
- ret_serial.port = 0;
- ret_serial.xmit_fifo_size = port->bulk_out_size;
- ret_serial.baud_base = MXU1_BAUD_BASE;
- ret_serial.close_delay = 5*HZ;
- ret_serial.closing_wait = cwait;
-
- if (copy_to_user(ret_arg, &ret_serial, sizeof(*ret_arg)))
- return -EFAULT;
-
- return 0;
-}
-
-
-static int mxu1_set_serial_info(struct usb_serial_port *port,
- struct serial_struct __user *new_arg)
-{
- struct serial_struct new_serial;
- unsigned cwait;
-
- if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
- return -EFAULT;
-
- cwait = new_serial.closing_wait;
- if (cwait != ASYNC_CLOSING_WAIT_NONE)
- cwait = msecs_to_jiffies(10 * new_serial.closing_wait);
-
- port->port.closing_wait = cwait;
-
- return 0;
-}
-
-static int mxu1_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- struct usb_serial_port *port = tty->driver_data;
-
- switch (cmd) {
- case TIOCGSERIAL:
- return mxu1_get_serial_info(port,
- (struct serial_struct __user *)arg);
- case TIOCSSERIAL:
- return mxu1_set_serial_info(port,
- (struct serial_struct __user *)arg);
- }
-
- return -ENOIOCTLCMD;
-}
-
-static int mxu1_tiocmget(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- unsigned int result;
- unsigned int msr;
- unsigned int mcr;
- unsigned long flags;
-
- mutex_lock(&mxport->mutex);
- spin_lock_irqsave(&mxport->spinlock, flags);
-
- msr = mxport->msr;
- mcr = mxport->mcr;
-
- spin_unlock_irqrestore(&mxport->spinlock, flags);
- mutex_unlock(&mxport->mutex);
-
- result = ((mcr & MXU1_MCR_DTR) ? TIOCM_DTR : 0) |
- ((mcr & MXU1_MCR_RTS) ? TIOCM_RTS : 0) |
- ((mcr & MXU1_MCR_LOOP) ? TIOCM_LOOP : 0) |
- ((msr & MXU1_MSR_CTS) ? TIOCM_CTS : 0) |
- ((msr & MXU1_MSR_CD) ? TIOCM_CAR : 0) |
- ((msr & MXU1_MSR_RI) ? TIOCM_RI : 0) |
- ((msr & MXU1_MSR_DSR) ? TIOCM_DSR : 0);
-
- dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
-
- return result;
-}
-
-static int mxu1_tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- int err;
- unsigned int mcr;
-
- mutex_lock(&mxport->mutex);
- mcr = mxport->mcr;
-
- if (set & TIOCM_RTS)
- mcr |= MXU1_MCR_RTS;
- if (set & TIOCM_DTR)
- mcr |= MXU1_MCR_DTR;
- if (set & TIOCM_LOOP)
- mcr |= MXU1_MCR_LOOP;
-
- if (clear & TIOCM_RTS)
- mcr &= ~MXU1_MCR_RTS;
- if (clear & TIOCM_DTR)
- mcr &= ~MXU1_MCR_DTR;
- if (clear & TIOCM_LOOP)
- mcr &= ~MXU1_MCR_LOOP;
-
- err = mxu1_set_mcr(port, mcr);
- if (!err)
- mxport->mcr = mcr;
-
- mutex_unlock(&mxport->mutex);
-
- return err;
-}
-
-static void mxu1_break(struct tty_struct *tty, int break_state)
-{
- struct usb_serial_port *port = tty->driver_data;
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
-
- if (break_state == -1)
- mxport->send_break = true;
- else
- mxport->send_break = false;
-
- mxu1_set_termios(tty, port, NULL);
-}
-
-static int mxu1_open(struct tty_struct *tty, struct usb_serial_port *port)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct usb_serial *serial = port->serial;
- int status;
- u16 open_settings;
-
- open_settings = (MXU1_PIPE_MODE_CONTINUOUS |
- MXU1_PIPE_TIMEOUT_ENABLE |
- (MXU1_TRANSFER_TIMEOUT << 2));
-
- mxport->msr = 0;
-
- status = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
- if (status) {
- dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
- status);
- return status;
- }
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_INPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear input buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_PURGE_PORT,
- MXU1_PURGE_OUTPUT, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot clear output buffers: %d\n",
- status);
-
- goto unlink_int_urb;
- }
-
- /*
- * reset the data toggle on the bulk endpoints to work around bug in
- * host controllers where things get out of sync some times
- */
- usb_clear_halt(serial->dev, port->write_urb->pipe);
- usb_clear_halt(serial->dev, port->read_urb->pipe);
-
- if (tty)
- mxu1_set_termios(tty, port, NULL);
-
- status = mxu1_send_ctrl_urb(serial, MXU1_OPEN_PORT,
- open_settings, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send open command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = mxu1_send_ctrl_urb(serial, MXU1_START_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "cannot send start command: %d\n", status);
- goto unlink_int_urb;
- }
-
- status = usb_serial_generic_open(tty, port);
- if (status)
- goto unlink_int_urb;
-
- return 0;
-
-unlink_int_urb:
- usb_kill_urb(port->interrupt_in_urb);
-
- return status;
-}
-
-static void mxu1_close(struct usb_serial_port *port)
-{
- int status;
-
- usb_serial_generic_close(port);
- usb_kill_urb(port->interrupt_in_urb);
-
- status = mxu1_send_ctrl_urb(port->serial, MXU1_CLOSE_PORT,
- 0, MXU1_UART1_PORT);
- if (status) {
- dev_err(&port->dev, "failed to send close port command: %d\n",
- status);
- }
-}
-
-static void mxu1_handle_new_msr(struct usb_serial_port *port, u8 msr)
-{
- struct mxu1_port *mxport = usb_get_serial_port_data(port);
- struct async_icount *icount;
- unsigned long flags;
-
- dev_dbg(&port->dev, "%s - msr 0x%02X\n", __func__, msr);
-
- spin_lock_irqsave(&mxport->spinlock, flags);
- mxport->msr = msr & MXU1_MSR_MASK;
- spin_unlock_irqrestore(&mxport->spinlock, flags);
-
- if (msr & MXU1_MSR_DELTA_MASK) {
- icount = &port->icount;
- if (msr & MXU1_MSR_DELTA_CTS)
- icount->cts++;
- if (msr & MXU1_MSR_DELTA_DSR)
- icount->dsr++;
- if (msr & MXU1_MSR_DELTA_CD)
- icount->dcd++;
- if (msr & MXU1_MSR_DELTA_RI)
- icount->rng++;
-
- wake_up_interruptible(&port->port.delta_msr_wait);
- }
-}
-
-static void mxu1_interrupt_callback(struct urb *urb)
-{
- struct usb_serial_port *port = urb->context;
- unsigned char *data = urb->transfer_buffer;
- int length = urb->actual_length;
- int function;
- int status;
- u8 msr;
-
- switch (urb->status) {
- case 0:
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- dev_dbg(&port->dev, "%s - urb shutting down: %d\n",
- __func__, urb->status);
- return;
- default:
- dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
- __func__, urb->status);
- goto exit;
- }
-
- if (length != 2) {
- dev_dbg(&port->dev, "%s - bad packet size: %d\n",
- __func__, length);
- goto exit;
- }
-
- if (data[0] == MXU1_CODE_HARDWARE_ERROR) {
- dev_err(&port->dev, "hardware error: %d\n", data[1]);
- goto exit;
- }
-
- function = mxu1_get_func_from_code(data[0]);
-
- dev_dbg(&port->dev, "%s - function %d, data 0x%02X\n",
- __func__, function, data[1]);
-
- switch (function) {
- case MXU1_CODE_DATA_ERROR:
- dev_dbg(&port->dev, "%s - DATA ERROR, data 0x%02X\n",
- __func__, data[1]);
- break;
-
- case MXU1_CODE_MODEM_STATUS:
- msr = data[1];
- mxu1_handle_new_msr(port, msr);
- break;
-
- default:
- dev_err(&port->dev, "unknown interrupt code: 0x%02X\n",
- data[1]);
- break;
- }
-
-exit:
- status = usb_submit_urb(urb, GFP_ATOMIC);
- if (status) {
- dev_err(&port->dev, "resubmit interrupt urb failed: %d\n",
- status);
- }
-}
-
-static struct usb_serial_driver mxu11x0_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "mxu11x0",
- },
- .description = "MOXA UPort 11x0",
- .id_table = mxu1_idtable,
- .num_ports = 1,
- .port_probe = mxu1_port_probe,
- .port_remove = mxu1_port_remove,
- .attach = mxu1_startup,
- .release = mxu1_release,
- .open = mxu1_open,
- .close = mxu1_close,
- .ioctl = mxu1_ioctl,
- .set_termios = mxu1_set_termios,
- .tiocmget = mxu1_tiocmget,
- .tiocmset = mxu1_tiocmset,
- .tiocmiwait = usb_serial_generic_tiocmiwait,
- .get_icount = usb_serial_generic_get_icount,
- .break_ctl = mxu1_break,
- .read_int_callback = mxu1_interrupt_callback,
-};
-
-static struct usb_serial_driver *const serial_drivers[] = {
- &mxu11x0_device, NULL
-};
-
-module_usb_serial_driver(serial_drivers, mxu1_idtable);
-
-MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
-MODULE_DESCRIPTION("MOXA UPort 11x0 USB to Serial Hub Driver");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("moxa/moxa-1110.fw");
-MODULE_FIRMWARE("moxa/moxa-1130.fw");
-MODULE_FIRMWARE("moxa/moxa-1131.fw");
-MODULE_FIRMWARE("moxa/moxa-1150.fw");
-MODULE_FIRMWARE("moxa/moxa-1151.fw");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index db86e512e0fc..348e19834b83 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -270,6 +270,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_UE910_V2 0x1012
#define TELIT_PRODUCT_LE922_USBCFG0 0x1042
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
+#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
@@ -315,6 +316,7 @@ static void option_instat_callback(struct urb *urb);
#define TOSHIBA_PRODUCT_G450 0x0d45
#define ALINK_VENDOR_ID 0x1e0e
+#define SIMCOM_PRODUCT_SIM7100E 0x9001 /* Yes, ALINK_VENDOR_ID */
#define ALINK_PRODUCT_PH300 0x9100
#define ALINK_PRODUCT_3GU 0x9200
@@ -607,6 +609,10 @@ static const struct option_blacklist_info zte_1255_blacklist = {
.reserved = BIT(3) | BIT(4),
};
+static const struct option_blacklist_info simcom_sim7100e_blacklist = {
+ .reserved = BIT(5) | BIT(6),
+};
+
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@@ -1122,9 +1128,13 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC650) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */
+ { USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */
+ .driver_info = (kernel_ulong_t)&net_intf3_blacklist },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */
+ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9003), /* Quectel UC20 */
+ .driver_info = (kernel_ulong_t)&net_intf4_blacklist },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1176,6 +1186,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
+ .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
@@ -1645,6 +1657,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
{ USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) },
{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+ { USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
+ .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = (kernel_ulong_t)&alcatel_x200_blacklist
},
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 9919d2a9faf2..1bc6089b9008 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -157,14 +157,17 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x1199, 0x9056)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9060)}, /* Sierra Wireless Modem */
{DEVICE_SWI(0x1199, 0x9061)}, /* Sierra Wireless Modem */
- {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx/EM74xx */
- {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx/EM74xx */
+ {DEVICE_SWI(0x1199, 0x9070)}, /* Sierra Wireless MC74xx */
+ {DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
+ {DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
+ {DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a9)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81b1)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {DEVICE_SWI(0x413c, 0x81b3)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
/* Huawei devices */
{DEVICE_HWI(0x03f0, 0x581d)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) */