summaryrefslogtreecommitdiffstats
path: root/drivers/usb/storage/sddr09.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/storage/sddr09.c')
-rw-r--r--drivers/usb/storage/sddr09.c82
1 files changed, 52 insertions, 30 deletions
diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c
index 79224fcf9b59..c5797fa2125e 100644
--- a/drivers/usb/storage/sddr09.c
+++ b/drivers/usb/storage/sddr09.c
@@ -1,4 +1,5 @@
-/* Driver for SanDisk SDDR-09 SmartMedia reader
+/*
+ * Driver for SanDisk SDDR-09 SmartMedia reader
*
* (c) 2000, 2001 Robert Baruch (autophile@starband.net)
* (c) 2002 Andries Brouwer (aeb@cwi.nl)
@@ -799,10 +800,12 @@ sddr09_read_data(struct us_data *us,
usb_stor_dbg(us, "Read %d zero pages (LBA %d) page %d\n",
pages, lba, page);
- /* This is not really an error. It just means
- that the block has never been written.
- Instead of returning an error
- it is better to return all zero data. */
+ /*
+ * This is not really an error. It just means
+ * that the block has never been written.
+ * Instead of returning an error
+ * it is better to return all zero data.
+ */
memset(buffer, 0, len);
@@ -890,8 +893,10 @@ sddr09_write_lba(struct us_data *us, unsigned int lba,
}
if (pba == 1) {
- /* Maybe it is impossible to write to PBA 1.
- Fake success, but don't do anything. */
+ /*
+ * Maybe it is impossible to write to PBA 1.
+ * Fake success, but don't do anything.
+ */
printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
return 0;
}
@@ -979,18 +984,22 @@ sddr09_write_data(struct us_data *us,
struct scatterlist *sg;
int result;
- // Figure out the initial LBA and page
+ /* Figure out the initial LBA and page */
lba = address >> info->blockshift;
page = (address & info->blockmask);
maxlba = info->capacity >> (info->pageshift + info->blockshift);
if (lba >= maxlba)
return -EIO;
- // blockbuffer is used for reading in the old data, overwriting
- // with the new data, and performing ECC calculations
+ /*
+ * blockbuffer is used for reading in the old data, overwriting
+ * with the new data, and performing ECC calculations
+ */
- /* TODO: instead of doing kmalloc/kfree for each write,
- add a bufferpointer to the info structure */
+ /*
+ * TODO: instead of doing kmalloc/kfree for each write,
+ * add a bufferpointer to the info structure
+ */
pagelen = (1 << info->pageshift) + (1 << CONTROL_SHIFT);
blocklen = (pagelen << info->blockshift);
@@ -1000,9 +1009,11 @@ sddr09_write_data(struct us_data *us,
return -ENOMEM;
}
- // Since we don't write the user data directly to the device,
- // we have to create a bounce buffer and move the data a piece
- // at a time between the bounce buffer and the actual transfer buffer.
+ /*
+ * Since we don't write the user data directly to the device,
+ * we have to create a bounce buffer and move the data a piece
+ * at a time between the bounce buffer and the actual transfer buffer.
+ */
len = min(sectors, (unsigned int) info->blocksize) * info->pagesize;
buffer = kmalloc(len, GFP_NOIO);
@@ -1018,7 +1029,7 @@ sddr09_write_data(struct us_data *us,
while (sectors > 0) {
- // Write as many sectors as possible in this block
+ /* Write as many sectors as possible in this block */
pages = min(sectors, info->blocksize - page);
len = (pages << info->pageshift);
@@ -1031,7 +1042,7 @@ sddr09_write_data(struct us_data *us,
break;
}
- // Get the data from the transfer buffer
+ /* Get the data from the transfer buffer */
usb_stor_access_xfer_buf(buffer, len, us->srb,
&sg, &offset, FROM_XFER_BUF);
@@ -1168,9 +1179,11 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) {
/* Byte 1 is the device type */
cardinfo = nand_find_id(deviceID[1]);
if (cardinfo) {
- /* MB or MiB? It is neither. A 16 MB card has
- 17301504 raw bytes, of which 16384000 are
- usable for user data. */
+ /*
+ * MB or MiB? It is neither. A 16 MB card has
+ * 17301504 raw bytes, of which 16384000 are
+ * usable for user data.
+ */
sprintf(blurbtxt + strlen(blurbtxt),
", %d MB", 1<<(cardinfo->chipshift - 20));
} else {
@@ -1211,14 +1224,18 @@ sddr09_read_map(struct us_data *us) {
if (!info->capacity)
return -1;
- // size of a block is 1 << (blockshift + pageshift) bytes
- // divide into the total capacity to get the number of blocks
+ /*
+ * size of a block is 1 << (blockshift + pageshift) bytes
+ * divide into the total capacity to get the number of blocks
+ */
numblocks = info->capacity >> (info->blockshift + info->pageshift);
- // read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
- // but only use a 64 KB buffer
- // buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+ /*
+ * read 64 bytes for every block (actually 1 << CONTROL_SHIFT)
+ * but only use a 64 KB buffer
+ * buffer size used must be a multiple of (1 << CONTROL_SHIFT)
+ */
#define SDDR09_READ_MAP_BUFSZ 65536
alloc_blocks = min(numblocks, SDDR09_READ_MAP_BUFSZ >> CONTROL_SHIFT);
@@ -1575,8 +1592,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
havefakesense = 1;
- /* Dummy up a response for INQUIRY since SDDR09 doesn't
- respond to INQUIRY commands */
+ /*
+ * Dummy up a response for INQUIRY since SDDR09 doesn't
+ * respond to INQUIRY commands
+ */
if (srb->cmnd[0] == INQUIRY) {
memcpy(ptr, inquiry_response, 8);
@@ -1628,8 +1647,10 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
if (srb->cmnd[0] == MODE_SENSE_10) {
int modepage = (srb->cmnd[2] & 0x3F);
- /* They ask for the Read/Write error recovery page,
- or for all pages. */
+ /*
+ * They ask for the Read/Write error recovery page,
+ * or for all pages.
+ */
/* %% We should check DBD %% */
if (modepage == 0x01 || modepage == 0x3F) {
usb_stor_dbg(us, "Dummy up request for mode page 0x%x\n",
@@ -1682,7 +1703,8 @@ static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us)
USB_STOR_TRANSPORT_ERROR);
}
- /* catch-all for all other commands, except
+ /*
+ * catch-all for all other commands, except
* pass TEST_UNIT_READY and REQUEST_SENSE through
*/
if (srb->cmnd[0] != TEST_UNIT_READY &&