summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig10
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/ch341.c113
-rw-r--r--drivers/usb/serial/cp210x.c411
-rw-r--r--drivers/usb/serial/f81534.c1409
-rw-r--r--drivers/usb/serial/ftdi_sio.c5
-rw-r--r--drivers/usb/serial/io_edgeport.c3
-rw-r--r--drivers/usb/serial/io_ti.c3
-rw-r--r--drivers/usb/serial/kl5kusb105.c35
-rw-r--r--drivers/usb/serial/mos7720.c3
-rw-r--r--drivers/usb/serial/mos7840.c3
-rw-r--r--drivers/usb/serial/opticon.c3
-rw-r--r--drivers/usb/serial/quatech2.c3
-rw-r--r--drivers/usb/serial/ssu100.c3
-rw-r--r--drivers/usb/serial/ti_usb_3410_5052.c3
-rw-r--r--drivers/usb/serial/usb_wwan.c3
16 files changed, 1914 insertions, 97 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 56ecb8b5115d..d9bc8dafe000 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -255,6 +255,16 @@ config USB_SERIAL_F81232
To compile this driver as a module, choose M here: the
module will be called f81232.
+config USB_SERIAL_F8153X
+ tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
+ help
+ Say Y here if you want to use the Fintek F81532/534 Multi-Ports
+ USB to serial adapter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called f81534.
+
+
config USB_SERIAL_GARMIN
tristate "USB Garmin GPS driver"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 349d9df0895f..9e43b7b002eb 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_USB_SERIAL_EDGEPORT) += io_edgeport.o
obj-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += io_ti.o
obj-$(CONFIG_USB_SERIAL_EMPEG) += empeg.o
obj-$(CONFIG_USB_SERIAL_F81232) += f81232.o
+obj-$(CONFIG_USB_SERIAL_F8153X) += f81534.o
obj-$(CONFIG_USB_SERIAL_FTDI_SIO) += ftdi_sio.o
obj-$(CONFIG_USB_SERIAL_GARMIN) += garmin_gps.o
obj-$(CONFIG_USB_SERIAL_IPAQ) += ipaq.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index f139488d0816..2597b83a8ae2 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -61,13 +61,26 @@
* the Net/FreeBSD uchcom.c driver by Takanori Watanabe. Domo arigato.
*/
+#define CH341_REQ_READ_VERSION 0x5F
#define CH341_REQ_WRITE_REG 0x9A
#define CH341_REQ_READ_REG 0x95
-#define CH341_REG_BREAK1 0x05
-#define CH341_REG_BREAK2 0x18
-#define CH341_NBREAK_BITS_REG1 0x01
-#define CH341_NBREAK_BITS_REG2 0x40
-
+#define CH341_REQ_SERIAL_INIT 0xA1
+#define CH341_REQ_MODEM_CTRL 0xA4
+
+#define CH341_REG_BREAK 0x05
+#define CH341_REG_LCR 0x18
+#define CH341_NBREAK_BITS 0x01
+
+#define CH341_LCR_ENABLE_RX 0x80
+#define CH341_LCR_ENABLE_TX 0x40
+#define CH341_LCR_MARK_SPACE 0x20
+#define CH341_LCR_PAR_EVEN 0x10
+#define CH341_LCR_ENABLE_PAR 0x08
+#define CH341_LCR_STOP_BITS_2 0x04
+#define CH341_LCR_CS8 0x03
+#define CH341_LCR_CS7 0x02
+#define CH341_LCR_CS6 0x01
+#define CH341_LCR_CS5 0x00
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x4348, 0x5523) },
@@ -119,10 +132,10 @@ static int ch341_control_in(struct usb_device *dev,
return r;
}
-static int ch341_set_baudrate(struct usb_device *dev,
- struct ch341_private *priv)
+static int ch341_init_set_baudrate(struct usb_device *dev,
+ struct ch341_private *priv, unsigned ctrl)
{
- short a, b;
+ short a;
int r;
unsigned long factor;
short divisor;
@@ -142,18 +155,17 @@ static int ch341_set_baudrate(struct usb_device *dev,
factor = 0x10000 - factor;
a = (factor & 0xff00) | divisor;
- b = factor & 0xff;
- r = ch341_control_out(dev, 0x9a, 0x1312, a);
- if (!r)
- r = ch341_control_out(dev, 0x9a, 0x0f2c, b);
+ /* 0x9c is "enable SFR_UART Control register and timer" */
+ r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT,
+ 0x9c | (ctrl << 8), a | 0x80);
return r;
}
static int ch341_set_handshake(struct usb_device *dev, u8 control)
{
- return ch341_control_out(dev, 0xa4, ~control, 0);
+ return ch341_control_out(dev, CH341_REQ_MODEM_CTRL, ~control, 0);
}
static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
@@ -167,7 +179,7 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
if (!buffer)
return -ENOMEM;
- r = ch341_control_in(dev, 0x95, 0x0706, 0, buffer, size);
+ r = ch341_control_in(dev, CH341_REQ_READ_REG, 0x0706, 0, buffer, size);
if (r < 0)
goto out;
@@ -197,24 +209,21 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
return -ENOMEM;
/* expect two bytes 0x27 0x00 */
- r = ch341_control_in(dev, 0x5f, 0, 0, buffer, size);
+ r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size);
if (r < 0)
goto out;
+ dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]);
- r = ch341_control_out(dev, 0xa1, 0, 0);
- if (r < 0)
- goto out;
-
- r = ch341_set_baudrate(dev, priv);
+ r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0);
if (r < 0)
goto out;
/* expect two bytes 0x56 0x00 */
- r = ch341_control_in(dev, 0x95, 0x2518, 0, buffer, size);
+ r = ch341_control_in(dev, CH341_REQ_READ_REG, 0x2518, 0, buffer, size);
if (r < 0)
goto out;
- r = ch341_control_out(dev, 0x9a, 0x2518, 0x0050);
+ r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, 0x0050);
if (r < 0)
goto out;
@@ -223,11 +232,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- r = ch341_control_out(dev, 0xa1, 0x501f, 0xd90a);
- if (r < 0)
- goto out;
-
- r = ch341_set_baudrate(dev, priv);
+ r = ch341_init_set_baudrate(dev, priv, 0);
if (r < 0)
goto out;
@@ -342,16 +347,53 @@ static void ch341_set_termios(struct tty_struct *tty,
struct ch341_private *priv = usb_get_serial_port_data(port);
unsigned baud_rate;
unsigned long flags;
+ unsigned char ctrl;
+ int r;
+
+ /* redundant changes may cause the chip to lose bytes */
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+ return;
baud_rate = tty_get_baud_rate(tty);
priv->baud_rate = baud_rate;
+ ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ ctrl |= CH341_LCR_CS5;
+ break;
+ case CS6:
+ ctrl |= CH341_LCR_CS6;
+ break;
+ case CS7:
+ ctrl |= CH341_LCR_CS7;
+ break;
+ case CS8:
+ ctrl |= CH341_LCR_CS8;
+ break;
+ }
+
+ if (C_PARENB(tty)) {
+ ctrl |= CH341_LCR_ENABLE_PAR;
+ if (C_PARODD(tty) == 0)
+ ctrl |= CH341_LCR_PAR_EVEN;
+ if (C_CMSPAR(tty))
+ ctrl |= CH341_LCR_MARK_SPACE;
+ }
+
+ if (C_CSTOPB(tty))
+ ctrl |= CH341_LCR_STOP_BITS_2;
if (baud_rate) {
spin_lock_irqsave(&priv->lock, flags);
priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
spin_unlock_irqrestore(&priv->lock, flags);
- ch341_set_baudrate(port->serial->dev, priv);
+ r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
+ if (r < 0 && old_termios) {
+ priv->baud_rate = tty_termios_baud_rate(old_termios);
+ tty_termios_copy_hw(&tty->termios, old_termios);
+ }
} else {
spin_lock_irqsave(&priv->lock, flags);
priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
@@ -360,17 +402,12 @@ static void ch341_set_termios(struct tty_struct *tty,
ch341_set_handshake(port->serial->dev, priv->line_control);
- /* Unimplemented:
- * (cflag & CSIZE) : data bits [5, 8]
- * (cflag & PARENB) : parity {NONE, EVEN, ODD}
- * (cflag & CSTOPB) : stop bits [1, 2]
- */
}
static void ch341_break_ctl(struct tty_struct *tty, int break_state)
{
const uint16_t ch341_break_reg =
- ((uint16_t) CH341_REG_BREAK2 << 8) | CH341_REG_BREAK1;
+ ((uint16_t) CH341_REG_LCR << 8) | CH341_REG_BREAK;
struct usb_serial_port *port = tty->driver_data;
int r;
uint16_t reg_contents;
@@ -391,12 +428,12 @@ static void ch341_break_ctl(struct tty_struct *tty, int break_state)
__func__, break_reg[0], break_reg[1]);
if (break_state != 0) {
dev_dbg(&port->dev, "%s - Enter break state requested\n", __func__);
- break_reg[0] &= ~CH341_NBREAK_BITS_REG1;
- break_reg[1] &= ~CH341_NBREAK_BITS_REG2;
+ break_reg[0] &= ~CH341_NBREAK_BITS;
+ break_reg[1] &= ~CH341_LCR_ENABLE_TX;
} else {
dev_dbg(&port->dev, "%s - Leave break state requested\n", __func__);
- break_reg[0] |= CH341_NBREAK_BITS_REG1;
- break_reg[1] |= CH341_NBREAK_BITS_REG2;
+ break_reg[0] |= CH341_NBREAK_BITS;
+ break_reg[1] |= CH341_LCR_ENABLE_TX;
}
dev_dbg(&port->dev, "%s - New ch341 break register contents - reg1: %x, reg2: %x\n",
__func__, break_reg[0], break_reg[1]);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 243ac5ebe46a..fff718352e0c 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -23,6 +23,9 @@
#include <linux/usb.h>
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
+#include <linux/gpio/driver.h>
+#include <linux/bitops.h>
+#include <linux/mutex.h>
#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
@@ -33,7 +36,7 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *);
static void cp210x_close(struct usb_serial_port *);
static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *);
static void cp210x_get_termios_port(struct usb_serial_port *port,
- unsigned int *cflagp, unsigned int *baudp);
+ tcflag_t *cflagp, unsigned int *baudp);
static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *,
struct ktermios *);
static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *,
@@ -44,6 +47,9 @@ static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int);
static int cp210x_tiocmset_port(struct usb_serial_port *port,
unsigned int, unsigned int);
static void cp210x_break_ctl(struct tty_struct *, int);
+static int cp210x_attach(struct usb_serial *);
+static void cp210x_disconnect(struct usb_serial *);
+static void cp210x_release(struct usb_serial *);
static int cp210x_port_probe(struct usb_serial_port *);
static int cp210x_port_remove(struct usb_serial_port *);
static void cp210x_dtr_rts(struct usb_serial_port *p, int on);
@@ -209,6 +215,16 @@ static const struct usb_device_id id_table[] = {
MODULE_DEVICE_TABLE(usb, id_table);
+struct cp210x_serial_private {
+#ifdef CONFIG_GPIOLIB
+ struct gpio_chip gc;
+ u8 config;
+ u8 gpio_mode;
+ bool gpio_registered;
+#endif
+ u8 partnum;
+};
+
struct cp210x_port_private {
__u8 bInterfaceNumber;
bool has_swapped_line_ctl;
@@ -230,6 +246,9 @@ static struct usb_serial_driver cp210x_device = {
.tx_empty = cp210x_tx_empty,
.tiocmget = cp210x_tiocmget,
.tiocmset = cp210x_tiocmset,
+ .attach = cp210x_attach,
+ .disconnect = cp210x_disconnect,
+ .release = cp210x_release,
.port_probe = cp210x_port_probe,
.port_remove = cp210x_port_remove,
.dtr_rts = cp210x_dtr_rts
@@ -272,6 +291,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
#define CP210X_SET_CHARS 0x19
#define CP210X_GET_BAUDRATE 0x1D
#define CP210X_SET_BAUDRATE 0x1E
+#define CP210X_VENDOR_SPECIFIC 0xFF
/* CP210X_IFC_ENABLE */
#define UART_ENABLE 0x0001
@@ -314,6 +334,21 @@ static struct usb_serial_driver * const serial_drivers[] = {
#define CONTROL_WRITE_DTR 0x0100
#define CONTROL_WRITE_RTS 0x0200
+/* CP210X_VENDOR_SPECIFIC values */
+#define CP210X_READ_LATCH 0x00C2
+#define CP210X_GET_PARTNUM 0x370B
+#define CP210X_GET_PORTCONFIG 0x370C
+#define CP210X_GET_DEVICEMODE 0x3711
+#define CP210X_WRITE_LATCH 0x37E1
+
+/* Part number definitions */
+#define CP210X_PARTNUM_CP2101 0x01
+#define CP210X_PARTNUM_CP2102 0x02
+#define CP210X_PARTNUM_CP2103 0x03
+#define CP210X_PARTNUM_CP2104 0x04
+#define CP210X_PARTNUM_CP2105 0x05
+#define CP210X_PARTNUM_CP2108 0x08
+
/* CP210X_GET_COMM_STATUS returns these 0x13 bytes */
struct cp210x_comm_status {
__le32 ulErrors;
@@ -369,6 +404,60 @@ struct cp210x_flow_ctl {
#define CP210X_SERIAL_RTS_ACTIVE 1
#define CP210X_SERIAL_RTS_FLOW_CTL 2
+/* CP210X_VENDOR_SPECIFIC, CP210X_GET_DEVICEMODE call reads these 0x2 bytes. */
+struct cp210x_pin_mode {
+ u8 eci;
+ u8 sci;
+} __packed;
+
+#define CP210X_PIN_MODE_MODEM 0
+#define CP210X_PIN_MODE_GPIO BIT(0)
+
+/*
+ * CP210X_VENDOR_SPECIFIC, CP210X_GET_PORTCONFIG call reads these 0xf bytes.
+ * Structure needs padding due to unused/unspecified bytes.
+ */
+struct cp210x_config {
+ __le16 gpio_mode;
+ u8 __pad0[2];
+ __le16 reset_state;
+ u8 __pad1[4];
+ __le16 suspend_state;
+ u8 sci_cfg;
+ u8 eci_cfg;
+ u8 device_cfg;
+} __packed;
+
+/* GPIO modes */
+#define CP210X_SCI_GPIO_MODE_OFFSET 9
+#define CP210X_SCI_GPIO_MODE_MASK GENMASK(11, 9)
+
+#define CP210X_ECI_GPIO_MODE_OFFSET 2
+#define CP210X_ECI_GPIO_MODE_MASK GENMASK(3, 2)
+
+/* CP2105 port configuration values */
+#define CP2105_GPIO0_TXLED_MODE BIT(0)
+#define CP2105_GPIO1_RXLED_MODE BIT(1)
+#define CP2105_GPIO1_RS485_MODE BIT(2)
+
+/* CP210X_VENDOR_SPECIFIC, CP210X_WRITE_LATCH call writes these 0x2 bytes. */
+struct cp210x_gpio_write {
+ u8 mask;
+ u8 state;
+} __packed;
+
+/*
+ * Helper to get interface number when we only have struct usb_serial.
+ */
+static u8 cp210x_interface_num(struct usb_serial *serial)
+{
+ struct usb_host_interface *cur_altsetting;
+
+ cur_altsetting = serial->interface->cur_altsetting;
+
+ return cur_altsetting->desc.bInterfaceNumber;
+}
+
/*
* Reads a variable-sized block of CP210X_ registers, identified by req.
* Returns data into buf in native USB byte order.
@@ -402,7 +491,7 @@ static int cp210x_read_reg_block(struct usb_serial_port *port, u8 req,
dev_err(&port->dev, "failed get req 0x%x size %d status: %d\n",
req, bufsize, result);
if (result >= 0)
- result = -EPROTO;
+ result = -EIO;
/*
* FIXME Some callers don't bother to check for error,
@@ -465,6 +554,40 @@ static int cp210x_read_u8_reg(struct usb_serial_port *port, u8 req, u8 *val)
}
/*
+ * Reads a variable-sized vendor block of CP210X_ registers, identified by val.
+ * Returns data into buf in native USB byte order.
+ */
+static int cp210x_read_vendor_block(struct usb_serial *serial, u8 type, u16 val,
+ void *buf, int bufsize)
+{
+ void *dmabuf;
+ int result;
+
+ dmabuf = kmalloc(bufsize, GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ CP210X_VENDOR_SPECIFIC, type, val,
+ cp210x_interface_num(serial), dmabuf, bufsize,
+ USB_CTRL_GET_TIMEOUT);
+ if (result == bufsize) {
+ memcpy(buf, dmabuf, bufsize);
+ result = 0;
+ } else {
+ dev_err(&serial->interface->dev,
+ "failed to get vendor val 0x%04x size %d: %d\n", val,
+ bufsize, result);
+ if (result >= 0)
+ result = -EIO;
+ }
+
+ kfree(dmabuf);
+
+ return result;
+}
+
+/*
* Writes any 16-bit CP210X_ register (req) whose value is passed
* entirely in the wValue field of the USB request.
*/
@@ -515,7 +638,7 @@ static int cp210x_write_reg_block(struct usb_serial_port *port, u8 req,
dev_err(&port->dev, "failed set req 0x%x size %d status: %d\n",
req, bufsize, result);
if (result >= 0)
- result = -EPROTO;
+ result = -EIO;
}
return result;
@@ -533,6 +656,42 @@ static int cp210x_write_u32_reg(struct usb_serial_port *port, u8 req, u32 val)
return cp210x_write_reg_block(port, req, &le32_val, sizeof(le32_val));
}
+#ifdef CONFIG_GPIOLIB
+/*
+ * Writes a variable-sized vendor block of CP210X_ registers, identified by val.
+ * Data in buf must be in native USB byte order.
+ */
+static int cp210x_write_vendor_block(struct usb_serial *serial, u8 type,
+ u16 val, void *buf, int bufsize)
+{
+ void *dmabuf;
+ int result;
+
+ dmabuf = kmemdup(buf, bufsize, GFP_KERNEL);
+ if (!dmabuf)
+ return -ENOMEM;
+
+ result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ CP210X_VENDOR_SPECIFIC, type, val,
+ cp210x_interface_num(serial), dmabuf, bufsize,
+ USB_CTRL_SET_TIMEOUT);
+
+ kfree(dmabuf);
+
+ if (result == bufsize) {
+ result = 0;
+ } else {
+ dev_err(&serial->interface->dev,
+ "failed to set vendor val 0x%04x size %d: %d\n", val,
+ bufsize, result);
+ if (result >= 0)
+ result = -EIO;
+ }
+
+ return result;
+}
+#endif
+
/*
* Detect CP2108 GET_LINE_CTL bug and activate workaround.
* Write a known good value 0x800, read it back.
@@ -683,7 +842,7 @@ static int cp210x_get_tx_queue_byte_count(struct usb_serial_port *port,
} else {
dev_err(&port->dev, "failed to get comm status: %d\n", result);
if (result >= 0)
- result = -EPROTO;
+ result = -EIO;
}
kfree(sts);
@@ -719,7 +878,7 @@ static void cp210x_get_termios(struct tty_struct *tty,
&tty->termios.c_cflag, &baud);
tty_encode_baud_rate(tty, baud, baud);
} else {
- unsigned int cflag;
+ tcflag_t cflag;
cflag = 0;
cp210x_get_termios_port(port, &cflag, &baud);
}
@@ -730,10 +889,10 @@ static void cp210x_get_termios(struct tty_struct *tty,
* This is the heart of cp210x_get_termios which always uses a &usb_serial_port.
*/
static void cp210x_get_termios_port(struct usb_serial_port *port,
- unsigned int *cflagp, unsigned int *baudp)
+ tcflag_t *cflagp, unsigned int *baudp)
{
struct device *dev = &port->dev;
- unsigned int cflag;
+ tcflag_t cflag;
struct cp210x_flow_ctl flow_ctl;
u32 baud;
u16 bits;
@@ -930,16 +1089,9 @@ static void cp210x_set_termios(struct tty_struct *tty,
dev_dbg(dev, "%s - data bits = 7\n", __func__);
break;
case CS8:
- bits |= BITS_DATA_8;
- dev_dbg(dev, "%s - data bits = 8\n", __func__);
- break;
- /*case CS9:
- bits |= BITS_DATA_9;
- dev_dbg(dev, "%s - data bits = 9\n", __func__);
- break;*/
default:
- dev_dbg(dev, "cp210x driver does not support the number of bits requested, using 8 bit mode\n");
bits |= BITS_DATA_8;
+ dev_dbg(dev, "%s - data bits = 8\n", __func__);
break;
}
if (cp210x_write_u16_reg(port, CP210X_SET_LINE_CTL, bits))
@@ -1108,10 +1260,188 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state)
cp210x_write_u16_reg(port, CP210X_SET_BREAK, state);
}
+#ifdef CONFIG_GPIOLIB
+static int cp210x_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct usb_serial *serial = gpiochip_get_data(gc);
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+ switch (offset) {
+ case 0:
+ if (priv->config & CP2105_GPIO0_TXLED_MODE)
+ return -ENODEV;
+ break;
+ case 1:
+ if (priv->config & (CP2105_GPIO1_RXLED_MODE |
+ CP2105_GPIO1_RS485_MODE))
+ return -ENODEV;
+ break;
+ }
+
+ return 0;
+}
+
+static int cp210x_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct usb_serial *serial = gpiochip_get_data(gc);
+ int result;
+ u8 buf;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_INTERFACE_TO_HOST,
+ CP210X_READ_LATCH, &buf, sizeof(buf));
+ if (result < 0)
+ return result;
+
+ return !!(buf & BIT(gpio));
+}
+
+static void cp210x_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+ struct usb_serial *serial = gpiochip_get_data(gc);
+ struct cp210x_gpio_write buf;
+
+ if (value == 1)
+ buf.state = BIT(gpio);
+ else
+ buf.state = 0;
+
+ buf.mask = BIT(gpio);
+
+ cp210x_write_vendor_block(serial, REQTYPE_HOST_TO_INTERFACE,
+ CP210X_WRITE_LATCH, &buf, sizeof(buf));
+}
+
+static int cp210x_gpio_direction_get(struct gpio_chip *gc, unsigned int gpio)
+{
+ /* Hardware does not support an input mode */
+ return 0;
+}
+
+static int cp210x_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+ /* Hardware does not support an input mode */
+ return -ENOTSUPP;
+}
+
+static int cp210x_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+ int value)
+{
+ return 0;
+}
+
+static int cp210x_gpio_set_single_ended(struct gpio_chip *gc, unsigned int gpio,
+ enum single_ended_mode mode)
+{
+ struct usb_serial *serial = gpiochip_get_data(gc);
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+ /* Succeed only if in correct mode (this can't be set at runtime) */
+ if ((mode == LINE_MODE_PUSH_PULL) && (priv->gpio_mode & BIT(gpio)))
+ return 0;
+
+ if ((mode == LINE_MODE_OPEN_DRAIN) && !(priv->gpio_mode & BIT(gpio)))
+ return 0;
+
+ return -ENOTSUPP;
+}
+
+/*
+ * This function is for configuring GPIO using shared pins, where other signals
+ * are made unavailable by configuring the use of GPIO. This is believed to be
+ * only applicable to the cp2105 at this point, the other devices supported by
+ * this driver that provide GPIO do so in a way that does not impact other
+ * signals and are thus expected to have very different initialisation.
+ */
+static int cp2105_shared_gpio_init(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+ struct cp210x_pin_mode mode;
+ struct cp210x_config config;
+ u8 intf_num = cp210x_interface_num(serial);
+ int result;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_DEVICEMODE, &mode,
+ sizeof(mode));
+ if (result < 0)
+ return result;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_PORTCONFIG, &config,
+ sizeof(config));
+ if (result < 0)
+ return result;
+
+ /* 2 banks of GPIO - One for the pins taken from each serial port */
+ if (intf_num == 0) {
+ if (mode.eci == CP210X_PIN_MODE_MODEM)
+ return 0;
+
+ priv->config = config.eci_cfg;
+ priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) &
+ CP210X_ECI_GPIO_MODE_MASK) >>
+ CP210X_ECI_GPIO_MODE_OFFSET);
+ priv->gc.ngpio = 2;
+ } else if (intf_num == 1) {
+ if (mode.sci == CP210X_PIN_MODE_MODEM)
+ return 0;
+
+ priv->config = config.sci_cfg;
+ priv->gpio_mode = (u8)((le16_to_cpu(config.gpio_mode) &
+ CP210X_SCI_GPIO_MODE_MASK) >>
+ CP210X_SCI_GPIO_MODE_OFFSET);
+ priv->gc.ngpio = 3;
+ } else {
+ return -ENODEV;
+ }
+
+ priv->gc.label = "cp210x";
+ priv->gc.request = cp210x_gpio_request;
+ priv->gc.get_direction = cp210x_gpio_direction_get;
+ priv->gc.direction_input = cp210x_gpio_direction_input;
+ priv->gc.direction_output = cp210x_gpio_direction_output;
+ priv->gc.get = cp210x_gpio_get;
+ priv->gc.set = cp210x_gpio_set;
+ priv->gc.set_single_ended = cp210x_gpio_set_single_ended;
+ priv->gc.owner = THIS_MODULE;
+ priv->gc.parent = &serial->interface->dev;
+ priv->gc.base = -1;
+ priv->gc.can_sleep = true;
+
+ result = gpiochip_add_data(&priv->gc, serial);
+ if (!result)
+ priv->gpio_registered = true;
+
+ return result;
+}
+
+static void cp210x_gpio_remove(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+ if (priv->gpio_registered) {
+ gpiochip_remove(&priv->gc);
+ priv->gpio_registered = false;
+ }
+}
+
+#else
+
+static int cp2105_shared_gpio_init(struct usb_serial *serial)
+{
+ return 0;
+}
+
+static void cp210x_gpio_remove(struct usb_serial *serial)
+{
+ /* Nothing to do */
+}
+
+#endif
+
static int cp210x_port_probe(struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
- struct usb_host_interface *cur_altsetting;
struct cp210x_port_private *port_priv;
int ret;
@@ -1119,8 +1449,7 @@ static int cp210x_port_probe(struct usb_serial_port *port)
if (!port_priv)
return -ENOMEM;
- cur_altsetting = serial->interface->cur_altsetting;
- port_priv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber;
+ port_priv->bInterfaceNumber = cp210x_interface_num(serial);
usb_set_serial_port_data(port, port_priv);
@@ -1143,6 +1472,52 @@ static int cp210x_port_remove(struct usb_serial_port *port)
return 0;
}
+static int cp210x_attach(struct usb_serial *serial)
+{
+ int result;
+ struct cp210x_serial_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ result = cp210x_read_vendor_block(serial, REQTYPE_DEVICE_TO_HOST,
+ CP210X_GET_PARTNUM, &priv->partnum,
+ sizeof(priv->partnum));
+ if (result < 0)
+ goto err_free_priv;
+
+ usb_set_serial_data(serial, priv);
+
+ if (priv->partnum == CP210X_PARTNUM_CP2105) {
+ result = cp2105_shared_gpio_init(serial);
+ if (result < 0) {
+ dev_err(&serial->interface->dev,
+ "GPIO initialisation failed, continuing without GPIO support\n");
+ }
+ }
+
+ return 0;
+err_free_priv:
+ kfree(priv);
+
+ return result;
+}
+
+static void cp210x_disconnect(struct usb_serial *serial)
+{
+ cp210x_gpio_remove(serial);
+}
+
+static void cp210x_release(struct usb_serial *serial)
+{
+ struct cp210x_serial_private *priv = usb_get_serial_data(serial);
+
+ cp210x_gpio_remove(serial);
+
+ kfree(priv);
+}
+
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/f81534.c b/drivers/usb/serial/f81534.c
new file mode 100644
index 000000000000..8282a6a18fee
--- /dev/null
+++ b/drivers/usb/serial/f81534.c
@@ -0,0 +1,1409 @@
+/*
+ * F81532/F81534 USB to Serial Ports Bridge
+ *
+ * F81532 => 2 Serial Ports
+ * F81534 => 4 Serial Ports
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Copyright (C) 2016 Feature Integration Technology Inc., (Fintek)
+ * Copyright (C) 2016 Tom Tsai (Tom_Tsai@fintek.com.tw)
+ * Copyright (C) 2016 Peter Hong (Peter_Hong@fintek.com.tw)
+ *
+ * The F81532/F81534 had 1 control endpoint for setting, 1 endpoint bulk-out
+ * for all serial port TX and 1 endpoint bulk-in for all serial port read in
+ * (Read Data/MSR/LSR).
+ *
+ * Write URB is fixed with 512bytes, per serial port used 128Bytes.
+ * It can be described by f81534_prepare_write_buffer()
+ *
+ * Read URB is 512Bytes max, per serial port used 128Bytes.
+ * It can be described by f81534_process_read_urb() and maybe received with
+ * 128x1,2,3,4 bytes.
+ *
+ */
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+/* Serial Port register Address */
+#define F81534_UART_BASE_ADDRESS 0x1200
+#define F81534_UART_OFFSET 0x10
+#define F81534_DIVISOR_LSB_REG (0x00 + F81534_UART_BASE_ADDRESS)
+#define F81534_DIVISOR_MSB_REG (0x01 + F81534_UART_BASE_ADDRESS)
+#define F81534_FIFO_CONTROL_REG (0x02 + F81534_UART_BASE_ADDRESS)
+#define F81534_LINE_CONTROL_REG (0x03 + F81534_UART_BASE_ADDRESS)
+#define F81534_MODEM_CONTROL_REG (0x04 + F81534_UART_BASE_ADDRESS)
+#define F81534_MODEM_STATUS_REG (0x06 + F81534_UART_BASE_ADDRESS)
+#define F81534_CONFIG1_REG (0x09 + F81534_UART_BASE_ADDRESS)
+
+#define F81534_DEF_CONF_ADDRESS_START 0x3000
+#define F81534_DEF_CONF_SIZE 8
+
+#define F81534_CUSTOM_ADDRESS_START 0x2f00
+#define F81534_CUSTOM_DATA_SIZE 0x10
+#define F81534_CUSTOM_NO_CUSTOM_DATA 0xff
+#define F81534_CUSTOM_VALID_TOKEN 0xf0
+#define F81534_CONF_OFFSET 1
+
+#define F81534_MAX_DATA_BLOCK 64
+#define F81534_MAX_BUS_RETRY 20
+
+/* Default URB timeout for USB operations */
+#define F81534_USB_MAX_RETRY 10
+#define F81534_USB_TIMEOUT 1000
+#define F81534_SET_GET_REGISTER 0xA0
+
+#define F81534_NUM_PORT 4
+#define F81534_UNUSED_PORT 0xff
+#define F81534_WRITE_BUFFER_SIZE 512
+
+#define DRIVER_DESC "Fintek F81532/F81534"
+#define FINTEK_VENDOR_ID_1 0x1934
+#define FINTEK_VENDOR_ID_2 0x2C42
+#define FINTEK_DEVICE_ID 0x1202
+#define F81534_MAX_TX_SIZE 124
+#define F81534_MAX_RX_SIZE 124
+#define F81534_RECEIVE_BLOCK_SIZE 128
+#define F81534_MAX_RECEIVE_BLOCK_SIZE 512
+
+#define F81534_TOKEN_RECEIVE 0x01
+#define F81534_TOKEN_WRITE 0x02
+#define F81534_TOKEN_TX_EMPTY 0x03
+#define F81534_TOKEN_MSR_CHANGE 0x04
+
+/*
+ * We used interal SPI bus to access FLASH section. We must wait the SPI bus to
+ * idle if we performed any command.
+ *
+ * SPI Bus status register: F81534_BUS_REG_STATUS
+ * Bit 0/1 : BUSY
+ * Bit 2 : IDLE
+ */
+#define F81534_BUS_BUSY (BIT(0) | BIT(1))
+#define F81534_BUS_IDLE BIT(2)
+#define F81534_BUS_READ_DATA 0x1004
+#define F81534_BUS_REG_STATUS 0x1003
+#define F81534_BUS_REG_START 0x1002
+#define F81534_BUS_REG_END 0x1001
+
+#define F81534_CMD_READ 0x03
+
+#define F81534_DEFAULT_BAUD_RATE 9600
+#define F81534_MAX_BAUDRATE 115200
+
+#define F81534_PORT_CONF_DISABLE_PORT BIT(3)
+#define F81534_PORT_CONF_NOT_EXIST_PORT BIT(7)
+#define F81534_PORT_UNAVAILABLE \
+ (F81534_PORT_CONF_DISABLE_PORT | F81534_PORT_CONF_NOT_EXIST_PORT)
+
+#define F81534_1X_RXTRIGGER 0xc3
+#define F81534_8X_RXTRIGGER 0xcf
+
+static const struct usb_device_id f81534_id_table[] = {
+ { USB_DEVICE(FINTEK_VENDOR_ID_1, FINTEK_DEVICE_ID) },
+ { USB_DEVICE(FINTEK_VENDOR_ID_2, FINTEK_DEVICE_ID) },
+ {} /* Terminating entry */
+};
+
+#define F81534_TX_EMPTY_BIT 0
+
+struct f81534_serial_private {
+ u8 conf_data[F81534_DEF_CONF_SIZE];
+ int tty_idx[F81534_NUM_PORT];
+ u8 setting_idx;
+ int opened_port;
+ struct mutex urb_mutex;
+};
+
+struct f81534_port_private {
+ struct mutex mcr_mutex;
+ unsigned long tx_empty;
+ spinlock_t msr_lock;
+ u8 shadow_mcr;
+ u8 shadow_msr;
+ u8 phy_num;
+};
+
+static int f81534_logic_to_phy_port(struct usb_serial *serial,
+ struct usb_serial_port *port)
+{
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ int count = 0;
+ int i;
+
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
+ continue;
+
+ if (port->port_number == count)
+ return i;
+
+ ++count;
+ }
+
+ return -ENODEV;
+}
+
+static int f81534_set_register(struct usb_serial *serial, u16 reg, u8 data)
+{
+ struct usb_interface *interface = serial->interface;
+ struct usb_device *dev = serial->dev;
+ size_t count = F81534_USB_MAX_RETRY;
+ int status;
+ u8 *tmp;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ *tmp = data;
+
+ /*
+ * Our device maybe not reply when heavily loading, We'll retry for
+ * F81534_USB_MAX_RETRY times.
+ */
+ while (count--) {
+ status = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ F81534_SET_GET_REGISTER,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ reg, 0, tmp, sizeof(u8),
+ F81534_USB_TIMEOUT);
+ if (status > 0) {
+ status = 0;
+ break;
+ } else if (status == 0) {
+ status = -EIO;
+ }
+ }
+
+ if (status < 0) {
+ dev_err(&interface->dev, "%s: reg: %x data: %x failed: %d\n",
+ __func__, reg, data, status);
+ }
+
+ kfree(tmp);
+ return status;
+}
+
+static int f81534_get_register(struct usb_serial *serial, u16 reg, u8 *data)
+{
+ struct usb_interface *interface = serial->interface;
+ struct usb_device *dev = serial->dev;
+ size_t count = F81534_USB_MAX_RETRY;
+ int status;
+ u8 *tmp;
+
+ tmp = kmalloc(sizeof(u8), GFP_KERNEL);
+ if (!tmp)
+ return -ENOMEM;
+
+ /*
+ * Our device maybe not reply when heavily loading, We'll retry for
+ * F81534_USB_MAX_RETRY times.
+ */
+ while (count--) {
+ status = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ F81534_SET_GET_REGISTER,
+ USB_TYPE_VENDOR | USB_DIR_IN,
+ reg, 0, tmp, sizeof(u8),
+ F81534_USB_TIMEOUT);
+ if (status > 0) {
+ status = 0;
+ break;
+ } else if (status == 0) {
+ status = -EIO;
+ }
+ }
+
+ if (status < 0) {
+ dev_err(&interface->dev, "%s: reg: %x failed: %d\n", __func__,
+ reg, status);
+ goto end;
+ }
+
+ *data = *tmp;
+
+end:
+ kfree(tmp);
+ return status;
+}
+
+static int f81534_set_port_register(struct usb_serial_port *port, u16 reg,
+ u8 data)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+ return f81534_set_register(port->serial,
+ reg + port_priv->phy_num * F81534_UART_OFFSET, data);
+}
+
+static int f81534_get_port_register(struct usb_serial_port *port, u16 reg,
+ u8 *data)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+ return f81534_get_register(port->serial,
+ reg + port_priv->phy_num * F81534_UART_OFFSET, data);
+}
+
+/*
+ * If we try to access the internal flash via SPI bus, we should check the bus
+ * status for every command. e.g., F81534_BUS_REG_START/F81534_BUS_REG_END
+ */
+static int f81534_wait_for_spi_idle(struct usb_serial *serial)
+{
+ size_t count = F81534_MAX_BUS_RETRY;
+ u8 tmp;
+ int status;
+
+ do {
+ status = f81534_get_register(serial, F81534_BUS_REG_STATUS,
+ &tmp);
+ if (status)
+ return status;
+
+ if (tmp & F81534_BUS_BUSY)
+ continue;
+
+ if (tmp & F81534_BUS_IDLE)
+ break;
+
+ } while (--count);
+
+ if (!count) {
+ dev_err(&serial->interface->dev,
+ "%s: timed out waiting for idle SPI bus\n",
+ __func__);
+ return -EIO;
+ }
+
+ return f81534_set_register(serial, F81534_BUS_REG_STATUS,
+ tmp & ~F81534_BUS_IDLE);
+}
+
+static int f81534_get_spi_register(struct usb_serial *serial, u16 reg,
+ u8 *data)
+{
+ int status;
+
+ status = f81534_get_register(serial, reg, data);
+ if (status)
+ return status;
+
+ return f81534_wait_for_spi_idle(serial);
+}
+
+static int f81534_set_spi_register(struct usb_serial *serial, u16 reg, u8 data)
+{
+ int status;
+
+ status = f81534_set_register(serial, reg, data);
+ if (status)
+ return status;
+
+ return f81534_wait_for_spi_idle(serial);
+}
+
+static int f81534_read_flash(struct usb_serial *serial, u32 address,
+ size_t size, u8 *buf)
+{
+ u8 tmp_buf[F81534_MAX_DATA_BLOCK];
+ size_t block = 0;
+ size_t read_size;
+ size_t count;
+ int status;
+ int offset;
+ u16 reg_tmp;
+
+ status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+ F81534_CMD_READ);
+ if (status)
+ return status;
+
+ status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+ (address >> 16) & 0xff);
+ if (status)
+ return status;
+
+ status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+ (address >> 8) & 0xff);
+ if (status)
+ return status;
+
+ status = f81534_set_spi_register(serial, F81534_BUS_REG_START,
+ (address >> 0) & 0xff);
+ if (status)
+ return status;
+
+ /* Continuous read mode */
+ do {
+ read_size = min_t(size_t, F81534_MAX_DATA_BLOCK, size);
+
+ for (count = 0; count < read_size; ++count) {
+ /* To write F81534_BUS_REG_END when final byte */
+ if (size <= F81534_MAX_DATA_BLOCK &&
+ read_size == count + 1)
+ reg_tmp = F81534_BUS_REG_END;
+ else
+ reg_tmp = F81534_BUS_REG_START;
+
+ /*
+ * Dummy code, force IC to generate a read pulse, the
+ * set of value 0xf1 is dont care (any value is ok)
+ */
+ status = f81534_set_spi_register(serial, reg_tmp,
+ 0xf1);
+ if (status)
+ return status;
+
+ status = f81534_get_spi_register(serial,
+ F81534_BUS_READ_DATA,
+ &tmp_buf[count]);
+ if (status)
+ return status;
+
+ offset = count + block * F81534_MAX_DATA_BLOCK;
+ buf[offset] = tmp_buf[count];
+ }
+
+ size -= read_size;
+ ++block;
+ } while (size);
+
+ return 0;
+}
+
+static void f81534_prepare_write_buffer(struct usb_serial_port *port, u8 *buf)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int phy_num = port_priv->phy_num;
+ u8 tx_len;
+ int i;
+
+ /*
+ * The block layout is fixed with 4x128 Bytes, per 128 Bytes a port.
+ * index 0: port phy idx (e.g., 0,1,2,3)
+ * index 1: only F81534_TOKEN_WRITE
+ * index 2: serial TX out length
+ * index 3: fix to 0
+ * index 4~127: serial out data block
+ */
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ buf[i * F81534_RECEIVE_BLOCK_SIZE] = i;
+ buf[i * F81534_RECEIVE_BLOCK_SIZE + 1] = F81534_TOKEN_WRITE;
+ buf[i * F81534_RECEIVE_BLOCK_SIZE + 2] = 0;
+ buf[i * F81534_RECEIVE_BLOCK_SIZE + 3] = 0;
+ }
+
+ tx_len = kfifo_out_locked(&port->write_fifo,
+ &buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 4],
+ F81534_MAX_TX_SIZE, &port->lock);
+
+ buf[phy_num * F81534_RECEIVE_BLOCK_SIZE + 2] = tx_len;
+}
+
+static int f81534_submit_writer(struct usb_serial_port *port, gfp_t mem_flags)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct urb *urb;
+ unsigned long flags;
+ int result;
+
+ /* Check is any data in write_fifo */
+ spin_lock_irqsave(&port->lock, flags);
+
+ if (kfifo_is_empty(&port->write_fifo)) {
+ spin_unlock_irqrestore(&port->lock, flags);
+ return 0;
+ }
+
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Check H/W is TXEMPTY */
+ if (!test_and_clear_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty))
+ return 0;
+
+ urb = port->write_urbs[0];
+ f81534_prepare_write_buffer(port, port->bulk_out_buffers[0]);
+ urb->transfer_buffer_length = F81534_WRITE_BUFFER_SIZE;
+
+ result = usb_submit_urb(urb, mem_flags);
+ if (result) {
+ set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+ dev_err(&port->dev, "%s: submit failed: %d\n", __func__,
+ result);
+ return result;
+ }
+
+ usb_serial_port_softint(port);
+ return 0;
+}
+
+static u32 f81534_calc_baud_divisor(u32 baudrate, u32 clockrate)
+{
+ if (!baudrate)
+ return 0;
+
+ /* Round to nearest divisor */
+ return DIV_ROUND_CLOSEST(clockrate, baudrate);
+}
+
+static int f81534_set_port_config(struct usb_serial_port *port, u32 baudrate,
+ u8 lcr)
+{
+ u32 divisor;
+ int status;
+ u8 value;
+
+ if (baudrate <= 1200)
+ value = F81534_1X_RXTRIGGER; /* 128 FIFO & TL: 1x */
+ else
+ value = F81534_8X_RXTRIGGER; /* 128 FIFO & TL: 8x */
+
+ status = f81534_set_port_register(port, F81534_CONFIG1_REG, value);
+ if (status) {
+ dev_err(&port->dev, "%s: CONFIG1 setting failed\n", __func__);
+ return status;
+ }
+
+ if (baudrate <= 1200)
+ value = UART_FCR_TRIGGER_1 | UART_FCR_ENABLE_FIFO; /* TL: 1 */
+ else
+ value = UART_FCR_R_TRIG_11 | UART_FCR_ENABLE_FIFO; /* TL: 14 */
+
+ status = f81534_set_port_register(port, F81534_FIFO_CONTROL_REG,
+ value);
+ if (status) {
+ dev_err(&port->dev, "%s: FCR setting failed\n", __func__);
+ return status;
+ }
+
+ divisor = f81534_calc_baud_divisor(baudrate, F81534_MAX_BAUDRATE);
+ value = UART_LCR_DLAB;
+ status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG,
+ value);
+ if (status) {
+ dev_err(&port->dev, "%s: set LCR failed\n", __func__);
+ return status;
+ }
+
+ value = divisor & 0xff;
+ status = f81534_set_port_register(port, F81534_DIVISOR_LSB_REG, value);
+ if (status) {
+ dev_err(&port->dev, "%s: set DLAB LSB failed\n", __func__);
+ return status;
+ }
+
+ value = (divisor >> 8) & 0xff;
+ status = f81534_set_port_register(port, F81534_DIVISOR_MSB_REG, value);
+ if (status) {
+ dev_err(&port->dev, "%s: set DLAB MSB failed\n", __func__);
+ return status;
+ }
+
+ status = f81534_set_port_register(port, F81534_LINE_CONTROL_REG, lcr);
+ if (status) {
+ dev_err(&port->dev, "%s: set LCR failed\n", __func__);
+ return status;
+ }
+
+ return 0;
+}
+
+static int f81534_update_mctrl(struct usb_serial_port *port, unsigned int set,
+ unsigned int clear)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int status;
+ u8 tmp;
+
+ if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0)
+ return 0; /* no change */
+
+ mutex_lock(&port_priv->mcr_mutex);
+
+ /* 'Set' takes precedence over 'Clear' */
+ clear &= ~set;
+
+ /* Always enable UART_MCR_OUT2 */
+ tmp = UART_MCR_OUT2 | port_priv->shadow_mcr;
+
+ if (clear & TIOCM_DTR)
+ tmp &= ~UART_MCR_DTR;
+
+ if (clear & TIOCM_RTS)
+ tmp &= ~UART_MCR_RTS;
+
+ if (set & TIOCM_DTR)
+ tmp |= UART_MCR_DTR;
+
+ if (set & TIOCM_RTS)
+ tmp |= UART_MCR_RTS;
+
+ status = f81534_set_port_register(port, F81534_MODEM_CONTROL_REG, tmp);
+ if (status < 0) {
+ dev_err(&port->dev, "%s: MCR write failed\n", __func__);
+ mutex_unlock(&port_priv->mcr_mutex);
+ return status;
+ }
+
+ port_priv->shadow_mcr = tmp;
+ mutex_unlock(&port_priv->mcr_mutex);
+ return 0;
+}
+
+/*
+ * This function will search the data area with token F81534_CUSTOM_VALID_TOKEN
+ * for latest configuration index. If nothing found
+ * (*index = F81534_CUSTOM_NO_CUSTOM_DATA), We'll load default configure in
+ * F81534_DEF_CONF_ADDRESS_START section.
+ *
+ * Due to we only use block0 to save data, so *index should be 0 or
+ * F81534_CUSTOM_NO_CUSTOM_DATA.
+ */
+static int f81534_find_config_idx(struct usb_serial *serial, u8 *index)
+{
+ u8 tmp;
+ int status;
+
+ status = f81534_read_flash(serial, F81534_CUSTOM_ADDRESS_START, 1,
+ &tmp);
+ if (status) {
+ dev_err(&serial->interface->dev, "%s: read failed: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ /* We'll use the custom data when the data is valid. */
+ if (tmp == F81534_CUSTOM_VALID_TOKEN)
+ *index = 0;
+ else
+ *index = F81534_CUSTOM_NO_CUSTOM_DATA;
+
+ return 0;
+}
+
+/*
+ * We had 2 generation of F81532/534 IC. All has an internal storage.
+ *
+ * 1st is pure USB-to-TTL RS232 IC and designed for 4 ports only, no any
+ * internal data will used. All mode and gpio control should manually set
+ * by AP or Driver and all storage space value are 0xff. The
+ * f81534_calc_num_ports() will run to final we marked as "oldest version"
+ * for this IC.
+ *
+ * 2rd is designed to more generic to use any transceiver and this is our
+ * mass production type. We'll save data in F81534_CUSTOM_ADDRESS_START
+ * (0x2f00) with 9bytes. The 1st byte is a indicater. If the token is
+ * F81534_CUSTOM_VALID_TOKEN(0xf0), the IC is 2nd gen type, the following
+ * 4bytes save port mode (0:RS232/1:RS485 Invert/2:RS485), and the last
+ * 4bytes save GPIO state(value from 0~7 to represent 3 GPIO output pin).
+ * The f81534_calc_num_ports() will run to "new style" with checking
+ * F81534_PORT_UNAVAILABLE section.
+ */
+static int f81534_calc_num_ports(struct usb_serial *serial)
+{
+ u8 setting[F81534_CUSTOM_DATA_SIZE];
+ u8 setting_idx;
+ u8 num_port = 0;
+ int status;
+ size_t i;
+
+ /* Check had custom setting */
+ status = f81534_find_config_idx(serial, &setting_idx);
+ if (status) {
+ dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
+ __func__, status);
+ return 0;
+ }
+
+ /*
+ * We'll read custom data only when data available, otherwise we'll
+ * read default value instead.
+ */
+ if (setting_idx != F81534_CUSTOM_NO_CUSTOM_DATA) {
+ status = f81534_read_flash(serial,
+ F81534_CUSTOM_ADDRESS_START +
+ F81534_CONF_OFFSET,
+ sizeof(setting), setting);
+ if (status) {
+ dev_err(&serial->interface->dev,
+ "%s: get custom data failed: %d\n",
+ __func__, status);
+ return 0;
+ }
+
+ dev_dbg(&serial->interface->dev,
+ "%s: read config from block: %d\n", __func__,
+ setting_idx);
+ } else {
+ /* Read default board setting */
+ status = f81534_read_flash(serial,
+ F81534_DEF_CONF_ADDRESS_START, F81534_NUM_PORT,
+ setting);
+
+ if (status) {
+ dev_err(&serial->interface->dev,
+ "%s: read failed: %d\n", __func__,
+ status);
+ return 0;
+ }
+
+ dev_dbg(&serial->interface->dev, "%s: read default config\n",
+ __func__);
+ }
+
+ /* New style, find all possible ports */
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (setting[i] & F81534_PORT_UNAVAILABLE)
+ continue;
+
+ ++num_port;
+ }
+
+ if (num_port)
+ return num_port;
+
+ dev_warn(&serial->interface->dev, "%s: Read Failed. default 4 ports\n",
+ __func__);
+ return 4; /* Nothing found, oldest version IC */
+}
+
+static void f81534_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ u8 new_lcr = 0;
+ int status;
+ u32 baud;
+
+ if (C_BAUD(tty) == B0)
+ f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+
+ if (C_PARENB(tty)) {
+ new_lcr |= UART_LCR_PARITY;
+
+ if (!C_PARODD(tty))
+ new_lcr |= UART_LCR_EPAR;
+
+ if (C_CMSPAR(tty))
+ new_lcr |= UART_LCR_SPAR;
+ }
+
+ if (C_CSTOPB(tty))
+ new_lcr |= UART_LCR_STOP;
+
+ switch (C_CSIZE(tty)) {
+ case CS5:
+ new_lcr |= UART_LCR_WLEN5;
+ break;
+ case CS6:
+ new_lcr |= UART_LCR_WLEN6;
+ break;
+ case CS7:
+ new_lcr |= UART_LCR_WLEN7;
+ break;
+ default:
+ case CS8:
+ new_lcr |= UART_LCR_WLEN8;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ if (!baud)
+ return;
+
+ if (baud > F81534_MAX_BAUDRATE) {
+ if (old_termios)
+ baud = tty_termios_baud_rate(old_termios);
+ else
+ baud = F81534_DEFAULT_BAUD_RATE;
+
+ tty_encode_baud_rate(tty, baud, baud);
+ }
+
+ dev_dbg(&port->dev, "%s: baud: %d\n", __func__, baud);
+
+ status = f81534_set_port_config(port, baud, new_lcr);
+ if (status < 0) {
+ dev_err(&port->dev, "%s: set port config failed: %d\n",
+ __func__, status);
+ }
+}
+
+static int f81534_submit_read_urb(struct usb_serial *serial, gfp_t flags)
+{
+ return usb_serial_generic_submit_read_urbs(serial->port[0], flags);
+}
+
+static void f81534_msr_changed(struct usb_serial_port *port, u8 msr)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ struct tty_struct *tty;
+ unsigned long flags;
+ u8 old_msr;
+
+ if (!(msr & UART_MSR_ANY_DELTA))
+ return;
+
+ spin_lock_irqsave(&port_priv->msr_lock, flags);
+ old_msr = port_priv->shadow_msr;
+ port_priv->shadow_msr = msr;
+ spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+ dev_dbg(&port->dev, "%s: MSR from %02x to %02x\n", __func__, old_msr,
+ msr);
+
+ /* Update input line counters */
+ if (msr & UART_MSR_DCTS)
+ port->icount.cts++;
+ if (msr & UART_MSR_DDSR)
+ port->icount.dsr++;
+ if (msr & UART_MSR_DDCD)
+ port->icount.dcd++;
+ if (msr & UART_MSR_TERI)
+ port->icount.rng++;
+
+ wake_up_interruptible(&port->port.delta_msr_wait);
+
+ if (!(msr & UART_MSR_DDCD))
+ return;
+
+ dev_dbg(&port->dev, "%s: DCD Changed: phy_num: %d from %x to %x\n",
+ __func__, port_priv->phy_num, old_msr, msr);
+
+ tty = tty_port_tty_get(&port->port);
+ if (!tty)
+ return;
+
+ usb_serial_handle_dcd_change(port, tty, msr & UART_MSR_DCD);
+ tty_kref_put(tty);
+}
+
+static int f81534_read_msr(struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ int status;
+ u8 msr;
+
+ /* Get MSR initial value */
+ status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
+ if (status)
+ return status;
+
+ /* Force update current state */
+ spin_lock_irqsave(&port_priv->msr_lock, flags);
+ port_priv->shadow_msr = msr;
+ spin_unlock_irqrestore(&port_priv->msr_lock, flags);
+
+ return 0;
+}
+
+static int f81534_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int status;
+
+ status = f81534_set_port_register(port,
+ F81534_FIFO_CONTROL_REG, UART_FCR_ENABLE_FIFO |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+ if (status) {
+ dev_err(&port->dev, "%s: Clear FIFO failed: %d\n", __func__,
+ status);
+ return status;
+ }
+
+ if (tty)
+ f81534_set_termios(tty, port, NULL);
+
+ status = f81534_read_msr(port);
+ if (status)
+ return status;
+
+ mutex_lock(&serial_priv->urb_mutex);
+
+ /* Submit Read URBs for first port opened */
+ if (!serial_priv->opened_port) {
+ status = f81534_submit_read_urb(port->serial, GFP_KERNEL);
+ if (status)
+ goto exit;
+ }
+
+ serial_priv->opened_port++;
+
+exit:
+ mutex_unlock(&serial_priv->urb_mutex);
+
+ set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+ return status;
+}
+
+static void f81534_close(struct usb_serial_port *port)
+{
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(port->serial);
+ struct usb_serial_port *port0 = port->serial->port[0];
+ unsigned long flags;
+ size_t i;
+
+ usb_kill_urb(port->write_urbs[0]);
+
+ spin_lock_irqsave(&port->lock, flags);
+ kfifo_reset_out(&port->write_fifo);
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Kill Read URBs when final port closed */
+ mutex_lock(&serial_priv->urb_mutex);
+ serial_priv->opened_port--;
+
+ if (!serial_priv->opened_port) {
+ for (i = 0; i < ARRAY_SIZE(port0->read_urbs); ++i)
+ usb_kill_urb(port0->read_urbs[i]);
+ }
+
+ mutex_unlock(&serial_priv->urb_mutex);
+}
+
+static int f81534_get_serial_info(struct usb_serial_port *port,
+ struct serial_struct __user *retinfo)
+{
+ struct f81534_port_private *port_priv;
+ struct serial_struct tmp;
+
+ port_priv = usb_get_serial_port_data(port);
+
+ memset(&tmp, 0, sizeof(tmp));
+
+ tmp.type = PORT_16550A;
+ tmp.port = port->port_number;
+ tmp.line = port->minor;
+ tmp.baud_base = F81534_MAX_BAUDRATE;
+
+ if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int f81534_ioctl(struct tty_struct *tty, unsigned int cmd,
+ unsigned long arg)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct serial_struct __user *buf = (struct serial_struct __user *)arg;
+
+ switch (cmd) {
+ case TIOCGSERIAL:
+ return f81534_get_serial_info(port, buf);
+ default:
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+static void f81534_process_per_serial_block(struct usb_serial_port *port,
+ u8 *data)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int phy_num = data[0];
+ size_t read_size = 0;
+ size_t i;
+ char tty_flag;
+ int status;
+ u8 lsr;
+
+ /*
+ * The block layout is 128 Bytes
+ * index 0: port phy idx (e.g., 0,1,2,3),
+ * index 1: It's could be
+ * F81534_TOKEN_RECEIVE
+ * F81534_TOKEN_TX_EMPTY
+ * F81534_TOKEN_MSR_CHANGE
+ * index 2: serial in size (data+lsr, must be even)
+ * meaningful for F81534_TOKEN_RECEIVE only
+ * index 3: current MSR with this device
+ * index 4~127: serial in data block (data+lsr, must be even)
+ */
+ switch (data[1]) {
+ case F81534_TOKEN_TX_EMPTY:
+ set_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+
+ /* Try to submit writer */
+ status = f81534_submit_writer(port, GFP_ATOMIC);
+ if (status)
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ return;
+
+ case F81534_TOKEN_MSR_CHANGE:
+ f81534_msr_changed(port, data[3]);
+ return;
+
+ case F81534_TOKEN_RECEIVE:
+ read_size = data[2];
+ if (read_size > F81534_MAX_RX_SIZE) {
+ dev_err(&port->dev,
+ "%s: phy: %d read_size: %zu larger than: %d\n",
+ __func__, phy_num, read_size,
+ F81534_MAX_RX_SIZE);
+ return;
+ }
+
+ break;
+
+ default:
+ dev_warn(&port->dev, "%s: unknown token: %02x\n", __func__,
+ data[1]);
+ return;
+ }
+
+ for (i = 4; i < 4 + read_size; i += 2) {
+ tty_flag = TTY_NORMAL;
+ lsr = data[i + 1];
+
+ if (lsr & UART_LSR_BRK_ERROR_BITS) {
+ if (lsr & UART_LSR_BI) {
+ tty_flag = TTY_BREAK;
+ port->icount.brk++;
+ usb_serial_handle_break(port);
+ } else if (lsr & UART_LSR_PE) {
+ tty_flag = TTY_PARITY;
+ port->icount.parity++;
+ } else if (lsr & UART_LSR_FE) {
+ tty_flag = TTY_FRAME;
+ port->icount.frame++;
+ }
+
+ if (lsr & UART_LSR_OE) {
+ port->icount.overrun++;
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
+ }
+
+ if (port->port.console && port->sysrq) {
+ if (usb_serial_handle_sysrq_char(port, data[i]))
+ continue;
+ }
+
+ tty_insert_flip_char(&port->port, data[i], tty_flag);
+ }
+
+ tty_flip_buffer_push(&port->port);
+}
+
+static void f81534_process_read_urb(struct urb *urb)
+{
+ struct f81534_serial_private *serial_priv;
+ struct usb_serial_port *port;
+ struct usb_serial *serial;
+ u8 *buf;
+ int phy_port_num;
+ int tty_port_num;
+ size_t i;
+
+ if (!urb->actual_length ||
+ urb->actual_length % F81534_RECEIVE_BLOCK_SIZE) {
+ return;
+ }
+
+ port = urb->context;
+ serial = port->serial;
+ buf = urb->transfer_buffer;
+ serial_priv = usb_get_serial_data(serial);
+
+ for (i = 0; i < urb->actual_length; i += F81534_RECEIVE_BLOCK_SIZE) {
+ phy_port_num = buf[i];
+ if (phy_port_num >= F81534_NUM_PORT) {
+ dev_err(&port->dev,
+ "%s: phy_port_num: %d larger than: %d\n",
+ __func__, phy_port_num, F81534_NUM_PORT);
+ continue;
+ }
+
+ tty_port_num = serial_priv->tty_idx[phy_port_num];
+ port = serial->port[tty_port_num];
+
+ if (tty_port_initialized(&port->port))
+ f81534_process_per_serial_block(port, &buf[i]);
+ }
+}
+
+static void f81534_write_usb_callback(struct urb *urb)
+{
+ struct usb_serial_port *port = urb->context;
+
+ switch (urb->status) {
+ case 0:
+ break;
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ dev_dbg(&port->dev, "%s - urb stopped: %d\n",
+ __func__, urb->status);
+ return;
+ case -EPIPE:
+ dev_err(&port->dev, "%s - urb stopped: %d\n",
+ __func__, urb->status);
+ return;
+ default:
+ dev_dbg(&port->dev, "%s - nonzero urb status: %d\n",
+ __func__, urb->status);
+ break;
+ }
+}
+
+static int f81534_setup_ports(struct usb_serial *serial)
+{
+ struct usb_serial_port *port;
+ u8 port0_out_address;
+ int buffer_size;
+ size_t i;
+
+ /*
+ * In our system architecture, we had 2 or 4 serial ports,
+ * but only get 1 set of bulk in/out endpoints.
+ *
+ * The usb-serial subsystem will generate port 0 data,
+ * but port 1/2/3 will not. It's will generate write URB and buffer
+ * by following code and use the port0 read URB for read operation.
+ */
+ for (i = 1; i < serial->num_ports; ++i) {
+ port0_out_address = serial->port[0]->bulk_out_endpointAddress;
+ buffer_size = serial->port[0]->bulk_out_size;
+ port = serial->port[i];
+
+ if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL))
+ return -ENOMEM;
+
+ port->bulk_out_size = buffer_size;
+ port->bulk_out_endpointAddress = port0_out_address;
+
+ port->write_urbs[0] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!port->write_urbs[0])
+ return -ENOMEM;
+
+ port->bulk_out_buffers[0] = kzalloc(buffer_size, GFP_KERNEL);
+ if (!port->bulk_out_buffers[0])
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(port->write_urbs[0], serial->dev,
+ usb_sndbulkpipe(serial->dev,
+ port0_out_address),
+ port->bulk_out_buffers[0], buffer_size,
+ serial->type->write_bulk_callback, port);
+
+ port->write_urb = port->write_urbs[0];
+ port->bulk_out_buffer = port->bulk_out_buffers[0];
+ }
+
+ return 0;
+}
+
+static int f81534_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ struct usb_endpoint_descriptor *endpoint;
+ struct usb_host_interface *iface_desc;
+ struct device *dev;
+ int num_bulk_in = 0;
+ int num_bulk_out = 0;
+ int size_bulk_in = 0;
+ int size_bulk_out = 0;
+ int i;
+
+ dev = &serial->interface->dev;
+ iface_desc = serial->interface->cur_altsetting;
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if (usb_endpoint_is_bulk_in(endpoint)) {
+ ++num_bulk_in;
+ size_bulk_in = usb_endpoint_maxp(endpoint);
+ }
+
+ if (usb_endpoint_is_bulk_out(endpoint)) {
+ ++num_bulk_out;
+ size_bulk_out = usb_endpoint_maxp(endpoint);
+ }
+ }
+
+ if (num_bulk_in != 1 || num_bulk_out != 1) {
+ dev_err(dev, "expected endpoints not found\n");
+ return -ENODEV;
+ }
+
+ if (size_bulk_out != F81534_WRITE_BUFFER_SIZE ||
+ size_bulk_in != F81534_MAX_RECEIVE_BLOCK_SIZE) {
+ dev_err(dev, "unsupported endpoint max packet size\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int f81534_attach(struct usb_serial *serial)
+{
+ struct f81534_serial_private *serial_priv;
+ int index = 0;
+ int status;
+ int i;
+
+ serial_priv = devm_kzalloc(&serial->interface->dev,
+ sizeof(*serial_priv), GFP_KERNEL);
+ if (!serial_priv)
+ return -ENOMEM;
+
+ usb_set_serial_data(serial, serial_priv);
+
+ mutex_init(&serial_priv->urb_mutex);
+
+ status = f81534_setup_ports(serial);
+ if (status)
+ return status;
+
+ /* Check had custom setting */
+ status = f81534_find_config_idx(serial, &serial_priv->setting_idx);
+ if (status) {
+ dev_err(&serial->interface->dev, "%s: find idx failed: %d\n",
+ __func__, status);
+ return status;
+ }
+
+ /*
+ * We'll read custom data only when data available, otherwise we'll
+ * read default value instead.
+ */
+ if (serial_priv->setting_idx == F81534_CUSTOM_NO_CUSTOM_DATA) {
+ /*
+ * The default configuration layout:
+ * byte 0/1/2/3: uart setting
+ */
+ status = f81534_read_flash(serial,
+ F81534_DEF_CONF_ADDRESS_START,
+ F81534_DEF_CONF_SIZE,
+ serial_priv->conf_data);
+ if (status) {
+ dev_err(&serial->interface->dev,
+ "%s: read reserve data failed: %d\n",
+ __func__, status);
+ return status;
+ }
+ } else {
+ /* Only read 8 bytes for mode & GPIO */
+ status = f81534_read_flash(serial,
+ F81534_CUSTOM_ADDRESS_START +
+ F81534_CONF_OFFSET,
+ sizeof(serial_priv->conf_data),
+ serial_priv->conf_data);
+ if (status) {
+ dev_err(&serial->interface->dev,
+ "%s: idx: %d get data failed: %d\n",
+ __func__, serial_priv->setting_idx,
+ status);
+ return status;
+ }
+ }
+
+ /* Assign phy-to-logic mapping */
+ for (i = 0; i < F81534_NUM_PORT; ++i) {
+ if (serial_priv->conf_data[i] & F81534_PORT_UNAVAILABLE)
+ continue;
+
+ serial_priv->tty_idx[i] = index++;
+ dev_dbg(&serial->interface->dev,
+ "%s: phy_num: %d, tty_idx: %d\n", __func__, i,
+ serial_priv->tty_idx[i]);
+ }
+
+ return 0;
+}
+
+static int f81534_port_probe(struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv;
+
+ port_priv = devm_kzalloc(&port->dev, sizeof(*port_priv), GFP_KERNEL);
+ if (!port_priv)
+ return -ENOMEM;
+
+ spin_lock_init(&port_priv->msr_lock);
+ mutex_init(&port_priv->mcr_mutex);
+
+ /* Assign logic-to-phy mapping */
+ port_priv->phy_num = f81534_logic_to_phy_port(port->serial, port);
+ if (port_priv->phy_num < 0 || port_priv->phy_num >= F81534_NUM_PORT)
+ return -ENODEV;
+
+ usb_set_serial_port_data(port, port_priv);
+ dev_dbg(&port->dev, "%s: port_number: %d, phy_num: %d\n", __func__,
+ port->port_number, port_priv->phy_num);
+
+ return 0;
+}
+
+static int f81534_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+ int status;
+ int r;
+ u8 msr;
+ u8 mcr;
+
+ /* Read current MSR from device */
+ status = f81534_get_port_register(port, F81534_MODEM_STATUS_REG, &msr);
+ if (status)
+ return status;
+
+ mutex_lock(&port_priv->mcr_mutex);
+ mcr = port_priv->shadow_mcr;
+ mutex_unlock(&port_priv->mcr_mutex);
+
+ r = (mcr & UART_MCR_DTR ? TIOCM_DTR : 0) |
+ (mcr & UART_MCR_RTS ? TIOCM_RTS : 0) |
+ (msr & UART_MSR_CTS ? TIOCM_CTS : 0) |
+ (msr & UART_MSR_DCD ? TIOCM_CAR : 0) |
+ (msr & UART_MSR_RI ? TIOCM_RI : 0) |
+ (msr & UART_MSR_DSR ? TIOCM_DSR : 0);
+
+ return r;
+}
+
+static int f81534_tiocmset(struct tty_struct *tty, unsigned int set,
+ unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+
+ return f81534_update_mctrl(port, set, clear);
+}
+
+static void f81534_dtr_rts(struct usb_serial_port *port, int on)
+{
+ if (on)
+ f81534_update_mctrl(port, TIOCM_DTR | TIOCM_RTS, 0);
+ else
+ f81534_update_mctrl(port, 0, TIOCM_DTR | TIOCM_RTS);
+}
+
+static int f81534_write(struct tty_struct *tty, struct usb_serial_port *port,
+ const u8 *buf, int count)
+{
+ int bytes_out, status;
+
+ if (!count)
+ return 0;
+
+ bytes_out = kfifo_in_locked(&port->write_fifo, buf, count,
+ &port->lock);
+
+ status = f81534_submit_writer(port, GFP_ATOMIC);
+ if (status) {
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ return status;
+ }
+
+ return bytes_out;
+}
+
+static bool f81534_tx_empty(struct usb_serial_port *port)
+{
+ struct f81534_port_private *port_priv = usb_get_serial_port_data(port);
+
+ return test_bit(F81534_TX_EMPTY_BIT, &port_priv->tx_empty);
+}
+
+static int f81534_resume(struct usb_serial *serial)
+{
+ struct f81534_serial_private *serial_priv =
+ usb_get_serial_data(serial);
+ struct usb_serial_port *port;
+ int error = 0;
+ int status;
+ size_t i;
+
+ /*
+ * We'll register port 0 bulkin when port had opened, It'll take all
+ * port received data, MSR register change and TX_EMPTY information.
+ */
+ mutex_lock(&serial_priv->urb_mutex);
+
+ if (serial_priv->opened_port) {
+ status = f81534_submit_read_urb(serial, GFP_NOIO);
+ if (status) {
+ mutex_unlock(&serial_priv->urb_mutex);
+ return status;
+ }
+ }
+
+ mutex_unlock(&serial_priv->urb_mutex);
+
+ for (i = 0; i < serial->num_ports; i++) {
+ port = serial->port[i];
+ if (!tty_port_initialized(&port->port))
+ continue;
+
+ status = f81534_submit_writer(port, GFP_NOIO);
+ if (status) {
+ dev_err(&port->dev, "%s: submit failed\n", __func__);
+ ++error;
+ }
+ }
+
+ if (error)
+ return -EIO;
+
+ return 0;
+}
+
+static struct usb_serial_driver f81534_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "f81534",
+ },
+ .description = DRIVER_DESC,
+ .id_table = f81534_id_table,
+ .open = f81534_open,
+ .close = f81534_close,
+ .write = f81534_write,
+ .tx_empty = f81534_tx_empty,
+ .calc_num_ports = f81534_calc_num_ports,
+ .probe = f81534_probe,
+ .attach = f81534_attach,
+ .port_probe = f81534_port_probe,
+ .dtr_rts = f81534_dtr_rts,
+ .process_read_urb = f81534_process_read_urb,
+ .ioctl = f81534_ioctl,
+ .tiocmget = f81534_tiocmget,
+ .tiocmset = f81534_tiocmset,
+ .write_bulk_callback = f81534_write_usb_callback,
+ .set_termios = f81534_set_termios,
+ .resume = f81534_resume,
+};
+
+static struct usb_serial_driver *const serial_drivers[] = {
+ &f81534_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, f81534_id_table);
+
+MODULE_DEVICE_TABLE(usb, f81534_id_table);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Peter Hong <Peter_Hong@fintek.com.tw>");
+MODULE_AUTHOR("Tom Tsai <Tom_Tsai@fintek.com.tw>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 6e9fc8bcc285..23d14b98ae2a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1455,8 +1455,6 @@ static int get_serial_info(struct usb_serial_port *port,
struct ftdi_private *priv = usb_get_serial_port_data(port);
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.flags = priv->flags;
tmp.baud_base = priv->baud_base;
@@ -1538,9 +1536,6 @@ static int get_lsr_info(struct usb_serial_port *port,
struct ftdi_private *priv = usb_get_serial_port_data(port);
unsigned int result = 0;
- if (!retinfo)
- return -EFAULT;
-
if (priv->transmit_empty)
result = TIOCSER_TEMT;
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 11c05ce2f35f..dcc0c58aaad5 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1554,9 +1554,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index fce82fd79f77..c339163698eb 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2459,9 +2459,6 @@ static int get_serial_info(struct edgeport_port *edge_port,
struct serial_struct tmp;
unsigned cwait;
- if (!retinfo)
- return -EFAULT;
-
cwait = edge_port->port->port.closing_wait;
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = jiffies_to_msecs(cwait) / 10;
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index fc5d3a791e08..0ee190fc1bf8 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -296,7 +296,7 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
rc = usb_serial_generic_open(tty, port);
if (rc) {
retval = rc;
- goto exit;
+ goto err_free_cfg;
}
rc = usb_control_msg(port->serial->dev,
@@ -311,21 +311,38 @@ static int klsi_105_open(struct tty_struct *tty, struct usb_serial_port *port)
if (rc < 0) {
dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
retval = rc;
+ goto err_generic_close;
} else
dev_dbg(&port->dev, "%s - enabled reading\n", __func__);
rc = klsi_105_get_line_state(port, &line_state);
- if (rc >= 0) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_state = line_state;
- spin_unlock_irqrestore(&priv->lock, flags);
- dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__, line_state);
- retval = 0;
- } else
+ if (rc < 0) {
retval = rc;
+ goto err_disable_read;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_state = line_state;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dev_dbg(&port->dev, "%s - read line state 0x%lx\n", __func__,
+ line_state);
+
+ return 0;
-exit:
+err_disable_read:
+ usb_control_msg(port->serial->dev,
+ usb_sndctrlpipe(port->serial->dev, 0),
+ KL5KUSB105A_SIO_CONFIGURE,
+ USB_TYPE_VENDOR | USB_DIR_OUT,
+ KL5KUSB105A_SIO_CONFIGURE_READ_OFF,
+ 0, /* index */
+ NULL, 0,
+ KLSI_TIMEOUT);
+err_generic_close:
+ usb_serial_generic_close(port);
+err_free_cfg:
kfree(cfg);
+
return retval;
}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index de9992b492b0..d52caa03679c 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1861,9 +1861,6 @@ static int get_serial_info(struct moschip_port *mos7720_port,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 57426d703a09..9a220b8e810f 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -1956,9 +1956,6 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
if (mos7840_port == NULL)
return -1;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.type = PORT_16550A;
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4b7bfb394a32..5ded6f524d59 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -336,9 +336,6 @@ static int get_serial_info(struct usb_serial_port *port,
{
struct serial_struct tmp;
- if (!serial)
- return -EFAULT;
-
memset(&tmp, 0x00, sizeof(tmp));
/* fake emulate a 16550 uart to make userspace code happy */
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 85acb50a7ee2..659cb8606bd9 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -463,9 +463,6 @@ static int get_serial_info(struct usb_serial_port *port,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.line = port->minor;
tmp.port = 0;
diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c
index 70a098de429f..2a156144c76c 100644
--- a/drivers/usb/serial/ssu100.c
+++ b/drivers/usb/serial/ssu100.c
@@ -318,9 +318,6 @@ static int get_serial_info(struct usb_serial_port *port,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.line = port->minor;
tmp.port = 0;
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a8b9bdba314f..8db9d071d940 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1426,9 +1426,6 @@ static int ti_get_serial_info(struct ti_port *tport,
struct serial_struct ret_serial;
unsigned cwait;
- if (!ret_arg)
- return -EFAULT;
-
cwait = port->port.closing_wait;
if (cwait != ASYNC_CLOSING_WAIT_NONE)
cwait = jiffies_to_msecs(cwait) / 10;
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 3dfdfc81254b..59bfcb3da116 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -140,9 +140,6 @@ static int get_serial_info(struct usb_serial_port *port,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
-
memset(&tmp, 0, sizeof(tmp));
tmp.line = port->minor;
tmp.port = port->port_number;
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-27 19:12:12 +0000