diff options
Diffstat (limited to 'drivers/usb/phy/phy-omap-control.c')
| -rw-r--r-- | drivers/usb/phy/phy-omap-control.c | 208 |
1 files changed, 109 insertions, 99 deletions
diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c index a4dda8e12562..09c5ace1edd8 100644 --- a/drivers/usb/phy/phy-omap-control.c +++ b/drivers/usb/phy/phy-omap-control.c @@ -20,87 +20,77 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/err.h> #include <linux/io.h> #include <linux/clk.h> #include <linux/usb/omap_control_usb.h> -static struct omap_control_usb *control_usb; - -/** - * omap_get_control_dev - returns the device pointer for this control device - * - * This API should be called to get the device pointer for this control - * module device. This device pointer should be used for called other - * exported API's in this driver. - * - * To be used by PHY driver and glue driver. - */ -struct device *omap_get_control_dev(void) -{ - if (!control_usb) - return ERR_PTR(-ENODEV); - - return control_usb->dev; -} -EXPORT_SYMBOL_GPL(omap_get_control_dev); - /** - * omap_control_usb3_phy_power - power on/off the serializer using control - * module + * omap_control_usb_phy_power - power on/off the phy using control module reg * @dev: the control module device - * @on: 0 to off and 1 to on based on powering on or off the PHY - * - * usb3 PHY driver should call this API to power on or off the PHY. + * @on: 0 or 1, based on powering on or off the PHY */ -void omap_control_usb3_phy_power(struct device *dev, bool on) +void omap_control_usb_phy_power(struct device *dev, int on) { u32 val; unsigned long rate; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); + struct omap_control_usb *control_usb; - if (control_usb->type != OMAP_CTRL_DEV_TYPE2) + if (IS_ERR(dev) || !dev) { + pr_err("%s: invalid device\n", __func__); return; + } - rate = clk_get_rate(control_usb->sys_clk); - rate = rate/1000000; - - val = readl(control_usb->phy_power); - - if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + control_usb = dev_get_drvdata(dev); + if (!control_usb) { + dev_err(dev, "%s: invalid control usb device\n", __func__); + return; } - writel(val, control_usb->phy_power); -} -EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power); + if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) + return; -/** - * omap_control_usb_phy_power - power on/off the phy using control module reg - * @dev: the control module device - * @on: 0 or 1, based on powering on or off the PHY - */ -void omap_control_usb_phy_power(struct device *dev, int on) -{ - u32 val; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); + val = readl(control_usb->power); - val = readl(control_usb->dev_conf); + switch (control_usb->type) { + case OMAP_CTRL_TYPE_USB2: + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + break; - if (on) - val &= ~OMAP_CTRL_DEV_PHY_PD; - else - val |= OMAP_CTRL_DEV_PHY_PD; + case OMAP_CTRL_TYPE_PIPE3: + rate = clk_get_rate(control_usb->sys_clk); + rate = rate/1000000; + + if (on) { + val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + } + break; - writel(val, control_usb->dev_conf); + case OMAP_CTRL_TYPE_DRA7USB2: + if (on) + val &= ~OMAP_CTRL_USB2_PHY_PD; + else + val |= OMAP_CTRL_USB2_PHY_PD; + break; + default: + dev_err(dev, "%s: type %d not recognized\n", + __func__, control_usb->type); + break; + } + + writel(val, control_usb->power); } EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); @@ -172,11 +162,19 @@ void omap_control_usb_set_mode(struct device *dev, { struct omap_control_usb *ctrl_usb; - if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1) + if (IS_ERR(dev) || !dev) return; ctrl_usb = dev_get_drvdata(dev); + if (!ctrl_usb) { + dev_err(dev, "Invalid control usb device\n"); + return; + } + + if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) + return; + switch (mode) { case USB_MODE_HOST: omap_control_usb_host_mode(ctrl_usb); @@ -193,12 +191,46 @@ void omap_control_usb_set_mode(struct device *dev, } EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); +#ifdef CONFIG_OF + +static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; + +static const struct of_device_id omap_control_usb_id_table[] = { + { + .compatible = "ti,control-phy-otghs", + .data = &otghs_data, + }, + { + .compatible = "ti,control-phy-usb2", + .data = &usb2_data, + }, + { + .compatible = "ti,control-phy-pipe3", + .data = &pipe3_data, + }, + { + .compatible = "ti,control-phy-dra7usb2", + .data = &dra7usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +#endif + + static int omap_control_usb_probe(struct platform_device *pdev) { struct resource *res; - struct device_node *np = pdev->dev.of_node; - struct omap_control_usb_platform_data *pdata = - dev_get_platdata(&pdev->dev); + const struct of_device_id *of_id; + struct omap_control_usb *control_usb; + + of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), + &pdev->dev); + if (!of_id) + return -EINVAL; control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), GFP_KERNEL); @@ -207,40 +239,27 @@ static int omap_control_usb_probe(struct platform_device *pdev) return -ENOMEM; } - if (np) { - of_property_read_u32(np, "ti,type", &control_usb->type); - } else if (pdata) { - control_usb->type = pdata->type; - } else { - dev_err(&pdev->dev, "no pdata present\n"); - return -EINVAL; - } - - control_usb->dev = &pdev->dev; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "control_dev_conf"); - control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->dev_conf)) - return PTR_ERR(control_usb->dev_conf); + control_usb->dev = &pdev->dev; + control_usb->type = *(enum omap_control_usb_type *)of_id->data; - if (control_usb->type == OMAP_CTRL_DEV_TYPE1) { + if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otghs_control"); control_usb->otghs_control = devm_ioremap_resource( &pdev->dev, res); if (IS_ERR(control_usb->otghs_control)) return PTR_ERR(control_usb->otghs_control); - } - - if (control_usb->type == OMAP_CTRL_DEV_TYPE2) { + } else { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "phy_power_usb"); - control_usb->phy_power = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->phy_power)) - return PTR_ERR(control_usb->phy_power); + "power"); + control_usb->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_usb->power)) { + dev_err(&pdev->dev, "Couldn't get power register\n"); + return PTR_ERR(control_usb->power); + } + } + if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { control_usb->sys_clk = devm_clk_get(control_usb->dev, "sys_clkin"); if (IS_ERR(control_usb->sys_clk)) { @@ -249,20 +268,11 @@ static int omap_control_usb_probe(struct platform_device *pdev) } } - dev_set_drvdata(control_usb->dev, control_usb); return 0; } -#ifdef CONFIG_OF -static const struct of_device_id omap_control_usb_id_table[] = { - { .compatible = "ti,omap-control-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); -#endif - static struct platform_driver omap_control_usb_driver = { .probe = omap_control_usb_probe, .driver = { |