diff options
Diffstat (limited to 'drivers/usb/misc')
| -rw-r--r-- | drivers/usb/misc/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/usb/misc/appledisplay.c | 8 | ||||
| -rw-r--r-- | drivers/usb/misc/chaoskey.c | 24 | ||||
| -rw-r--r-- | drivers/usb/misc/ftdi-elan.c | 6 | ||||
| -rw-r--r-- | drivers/usb/misc/idmouse.c | 36 | ||||
| -rw-r--r-- | drivers/usb/misc/legousbtower.c | 303 | ||||
| -rw-r--r-- | drivers/usb/misc/sisusbvga/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/misc/usb251xb.c | 66 |
8 files changed, 222 insertions, 245 deletions
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index 9bce583aada3..834b2494da73 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -181,8 +181,8 @@ config USB_TEST including sample test device firmware and "how to use it". config USB_EHSET_TEST_FIXTURE - tristate "USB EHSET Test Fixture driver" - help + tristate "USB EHSET Test Fixture driver" + help Say Y here if you want to support the special test fixture device used for the USB-IF Embedded Host High-Speed Electrical Test procedure. @@ -233,17 +233,17 @@ config USB_HUB_USB251XB Say Y or M here if you need to configure such a device via SMBus. config USB_HSIC_USB3503 - tristate "USB3503 HSIC to USB20 Driver" - depends on I2C - select REGMAP_I2C - help - This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. config USB_HSIC_USB4604 - tristate "USB4604 HSIC to USB20 Driver" - depends on I2C - help - This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + tristate "USB4604 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. config USB_LINK_LAYER_TEST tristate "USB Link Layer Test driver" diff --git a/drivers/usb/misc/appledisplay.c b/drivers/usb/misc/appledisplay.c index ac92725458b5..ba1eaabc7796 100644 --- a/drivers/usb/misc/appledisplay.c +++ b/drivers/usb/misc/appledisplay.c @@ -164,7 +164,12 @@ static int appledisplay_bl_get_brightness(struct backlight_device *bd) 0, pdata->msgdata, 2, ACD_USB_TIMEOUT); - brightness = pdata->msgdata[1]; + if (retval < 2) { + if (retval >= 0) + retval = -EMSGSIZE; + } else { + brightness = pdata->msgdata[1]; + } mutex_unlock(&pdata->sysfslock); if (retval < 0) @@ -299,6 +304,7 @@ error: if (pdata) { if (pdata->urb) { usb_kill_urb(pdata->urb); + cancel_delayed_work_sync(&pdata->work); if (pdata->urbdata) usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN, pdata->urbdata, pdata->urb->transfer_dma); diff --git a/drivers/usb/misc/chaoskey.c b/drivers/usb/misc/chaoskey.c index 34e6cd6f40d3..87067c3d6109 100644 --- a/drivers/usb/misc/chaoskey.c +++ b/drivers/usb/misc/chaoskey.c @@ -384,13 +384,17 @@ static int _chaoskey_fill(struct chaoskey *dev) !dev->reading, (started ? NAK_TIMEOUT : ALEA_FIRST_TIMEOUT) ); - if (result < 0) + if (result < 0) { + usb_kill_urb(dev->urb); goto out; + } - if (result == 0) + if (result == 0) { result = -ETIMEDOUT; - else + usb_kill_urb(dev->urb); + } else { result = dev->valid; + } out: /* Let the device go back to sleep eventually */ usb_autopm_put_interface(dev->interface); @@ -526,7 +530,21 @@ static int chaoskey_suspend(struct usb_interface *interface, static int chaoskey_resume(struct usb_interface *interface) { + struct chaoskey *dev; + struct usb_device *udev = interface_to_usbdev(interface); + usb_dbg(interface, "resume"); + dev = usb_get_intfdata(interface); + + /* + * We may have lost power. + * In that case the device that needs a long time + * for the first requests needs an extended timeout + * again + */ + if (le16_to_cpu(udev->descriptor.idVendor) == ALEA_VENDOR_ID) + dev->reads_started = false; + return 0; } #else diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index cdee3af33ad7..8a3d9c0c8d8b 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -333,7 +333,8 @@ static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi) *respond->result = -ESHUTDOWN; *respond->value = 0; complete(&respond->wait_completion); - } mutex_unlock(&ftdi->u132_lock); + } + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi) @@ -763,7 +764,8 @@ static int ftdi_elan_total_command_size(struct usb_ftdi *ftdi, int command_size) struct u132_command *command = &ftdi->command[COMMAND_MASK & i++]; total_size += 5 + command->follows; - } return total_size; + } + return total_size; } static int ftdi_elan_command_engine(struct usb_ftdi *ftdi) diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index 20b0f91a5d9b..4afb5ddfd361 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -56,11 +56,10 @@ static const struct usb_device_id idmouse_table[] = { #define FTIP_SCROLL 0x24 #define ftip_command(dev, command, value, index) \ - usb_control_msg (dev->udev, usb_sndctrlpipe (dev->udev, 0), command, \ + usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), command, \ USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000) MODULE_DEVICE_TABLE(usb, idmouse_table); -static DEFINE_MUTEX(open_disc_mutex); /* structure to hold all of our device specific stuff */ struct usb_idmouse { @@ -158,8 +157,8 @@ static int idmouse_create_image(struct usb_idmouse *dev) /* loop over a blocking bulk read to get data from the device */ while (bytes_read < IMGSIZE) { - result = usb_bulk_msg (dev->udev, - usb_rcvbulkpipe (dev->udev, dev->bulk_in_endpointAddr), + result = usb_bulk_msg(dev->udev, + usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), dev->bulk_in_buffer + bytes_read, dev->bulk_in_size, &bulk_read, 5000); if (result < 0) { @@ -223,21 +222,17 @@ static int idmouse_open(struct inode *inode, struct file *file) int result; /* get the interface from minor number and driver information */ - interface = usb_find_interface (&idmouse_driver, iminor (inode)); + interface = usb_find_interface(&idmouse_driver, iminor(inode)); if (!interface) return -ENODEV; - mutex_lock(&open_disc_mutex); /* get the device information block from the interface */ dev = usb_get_intfdata(interface); - if (!dev) { - mutex_unlock(&open_disc_mutex); + if (!dev) return -ENODEV; - } /* lock this device */ mutex_lock(&dev->lock); - mutex_unlock(&open_disc_mutex); /* check if already open */ if (dev->open) { @@ -251,7 +246,7 @@ static int idmouse_open(struct inode *inode, struct file *file) result = usb_autopm_get_interface(interface); if (result) goto error; - result = idmouse_create_image (dev); + result = idmouse_create_image(dev); usb_autopm_put_interface(interface); if (result) goto error; @@ -280,27 +275,17 @@ static int idmouse_release(struct inode *inode, struct file *file) if (dev == NULL) return -ENODEV; - mutex_lock(&open_disc_mutex); /* lock our device */ mutex_lock(&dev->lock); - /* are we really open? */ - if (dev->open <= 0) { - mutex_unlock(&dev->lock); - mutex_unlock(&open_disc_mutex); - return -ENODEV; - } - --dev->open; if (!dev->present) { /* the device was unplugged before the file was released */ mutex_unlock(&dev->lock); - mutex_unlock(&open_disc_mutex); idmouse_delete(dev); } else { mutex_unlock(&dev->lock); - mutex_unlock(&open_disc_mutex); } return 0; } @@ -379,7 +364,6 @@ static int idmouse_probe(struct usb_interface *interface, if (result) { /* something prevented us from registering this device */ dev_err(&interface->dev, "Unable to allocate minor number.\n"); - usb_set_intfdata(interface, NULL); idmouse_delete(dev); return result; } @@ -392,19 +376,13 @@ static int idmouse_probe(struct usb_interface *interface, static void idmouse_disconnect(struct usb_interface *interface) { - struct usb_idmouse *dev; - - /* get device structure */ - dev = usb_get_intfdata(interface); + struct usb_idmouse *dev = usb_get_intfdata(interface); /* give back our minor */ usb_deregister_dev(interface, &idmouse_class); - mutex_lock(&open_disc_mutex); - usb_set_intfdata(interface, NULL); /* lock the device */ mutex_lock(&dev->lock); - mutex_unlock(&open_disc_mutex); /* prevent device read, write and ioctl */ dev->present = 0; diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 23061f1526b4..ab4b98b04115 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -157,19 +157,19 @@ MODULE_PARM_DESC(interrupt_out_interval, "Interrupt out interval in ms"); #define LEGO_USB_TOWER_REQUEST_GET_VERSION 0xFD struct tower_reset_reply { - __le16 size; /* little-endian */ + __le16 size; __u8 err_code; __u8 spare; -} __attribute__ ((packed)); +}; struct tower_get_version_reply { - __le16 size; /* little-endian */ + __le16 size; __u8 err_code; __u8 spare; __u8 major; __u8 minor; - __le16 build_no; /* little-endian */ -} __attribute__ ((packed)); + __le16 build_no; +}; /* table of devices that work with this driver */ @@ -178,7 +178,7 @@ static const struct usb_device_id tower_table[] = { { } /* Terminating entry */ }; -MODULE_DEVICE_TABLE (usb, tower_table); +MODULE_DEVICE_TABLE(usb, tower_table); #define LEGO_USB_TOWER_MINOR_BASE 160 @@ -186,13 +186,13 @@ MODULE_DEVICE_TABLE (usb, tower_table); /* Structure to hold all of our device specific stuff */ struct lego_usb_tower { struct mutex lock; /* locks this structure */ - struct usb_device* udev; /* save off the usb device pointer */ + struct usb_device *udev; /* save off the usb device pointer */ unsigned char minor; /* the starting minor number for this device */ int open_count; /* number of times this port has been opened */ unsigned long disconnected:1; - char* read_buffer; + char *read_buffer; size_t read_buffer_length; /* this much came in */ size_t read_packet_length; /* this much will be returned on read */ spinlock_t read_buffer_lock; @@ -202,16 +202,15 @@ struct lego_usb_tower { wait_queue_head_t read_wait; wait_queue_head_t write_wait; - char* interrupt_in_buffer; - struct usb_endpoint_descriptor* interrupt_in_endpoint; - struct urb* interrupt_in_urb; + char *interrupt_in_buffer; + struct usb_endpoint_descriptor *interrupt_in_endpoint; + struct urb *interrupt_in_urb; int interrupt_in_interval; - int interrupt_in_running; int interrupt_in_done; - char* interrupt_out_buffer; - struct usb_endpoint_descriptor* interrupt_out_endpoint; - struct urb* interrupt_out_urb; + char *interrupt_out_buffer; + struct usb_endpoint_descriptor *interrupt_out_endpoint; + struct urb *interrupt_out_urb; int interrupt_out_interval; int interrupt_out_busy; @@ -219,21 +218,20 @@ struct lego_usb_tower { /* local function prototypes */ -static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, loff_t *ppos); -static ssize_t tower_write (struct file *file, const char __user *buffer, size_t count, loff_t *ppos); -static inline void tower_delete (struct lego_usb_tower *dev); -static int tower_open (struct inode *inode, struct file *file); -static int tower_release (struct inode *inode, struct file *file); -static __poll_t tower_poll (struct file *file, poll_table *wait); -static loff_t tower_llseek (struct file *file, loff_t off, int whence); +static ssize_t tower_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos); +static ssize_t tower_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos); +static inline void tower_delete(struct lego_usb_tower *dev); +static int tower_open(struct inode *inode, struct file *file); +static int tower_release(struct inode *inode, struct file *file); +static __poll_t tower_poll(struct file *file, poll_table *wait); +static loff_t tower_llseek(struct file *file, loff_t off, int whence); -static void tower_abort_transfers (struct lego_usb_tower *dev); -static void tower_check_for_read_packet (struct lego_usb_tower *dev); -static void tower_interrupt_in_callback (struct urb *urb); -static void tower_interrupt_out_callback (struct urb *urb); +static void tower_check_for_read_packet(struct lego_usb_tower *dev); +static void tower_interrupt_in_callback(struct urb *urb); +static void tower_interrupt_out_callback(struct urb *urb); -static int tower_probe (struct usb_interface *interface, const struct usb_device_id *id); -static void tower_disconnect (struct usb_interface *interface); +static int tower_probe(struct usb_interface *interface, const struct usb_device_id *id); +static void tower_disconnect(struct usb_interface *interface); /* file operations needed when we register this driver */ @@ -288,23 +286,23 @@ static inline void lego_usb_tower_debug_data(struct device *dev, /** * tower_delete */ -static inline void tower_delete (struct lego_usb_tower *dev) +static inline void tower_delete(struct lego_usb_tower *dev) { /* free data structures */ usb_free_urb(dev->interrupt_in_urb); usb_free_urb(dev->interrupt_out_urb); - kfree (dev->read_buffer); - kfree (dev->interrupt_in_buffer); - kfree (dev->interrupt_out_buffer); + kfree(dev->read_buffer); + kfree(dev->interrupt_in_buffer); + kfree(dev->interrupt_out_buffer); usb_put_dev(dev->udev); - kfree (dev); + kfree(dev); } /** * tower_open */ -static int tower_open (struct inode *inode, struct file *file) +static int tower_open(struct inode *inode, struct file *file) { struct lego_usb_tower *dev = NULL; int subminor; @@ -314,7 +312,6 @@ static int tower_open (struct inode *inode, struct file *file) int result; reset_reply = kmalloc(sizeof(*reset_reply), GFP_KERNEL); - if (!reset_reply) { retval = -ENOMEM; goto exit; @@ -323,8 +320,7 @@ static int tower_open (struct inode *inode, struct file *file) nonseekable_open(inode, file); subminor = iminor(inode); - interface = usb_find_interface (&tower_driver, subminor); - + interface = usb_find_interface(&tower_driver, subminor); if (!interface) { pr_err("error, can't find device for minor %d\n", subminor); retval = -ENODEV; @@ -351,15 +347,15 @@ static int tower_open (struct inode *inode, struct file *file) } /* reset the tower */ - result = usb_control_msg (dev->udev, - usb_rcvctrlpipe(dev->udev, 0), - LEGO_USB_TOWER_REQUEST_RESET, - USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, - 0, - 0, - reset_reply, - sizeof(*reset_reply), - 1000); + result = usb_control_msg(dev->udev, + usb_rcvctrlpipe(dev->udev, 0), + LEGO_USB_TOWER_REQUEST_RESET, + USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, + 0, + 0, + reset_reply, + sizeof(*reset_reply), + 1000); if (result < 0) { dev_err(&dev->udev->dev, "LEGO USB Tower reset control request failed\n"); @@ -370,24 +366,22 @@ static int tower_open (struct inode *inode, struct file *file) /* initialize in direction */ dev->read_buffer_length = 0; dev->read_packet_length = 0; - usb_fill_int_urb (dev->interrupt_in_urb, - dev->udev, - usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), - dev->interrupt_in_buffer, - usb_endpoint_maxp(dev->interrupt_in_endpoint), - tower_interrupt_in_callback, - dev, - dev->interrupt_in_interval); - - dev->interrupt_in_running = 1; + usb_fill_int_urb(dev->interrupt_in_urb, + dev->udev, + usb_rcvintpipe(dev->udev, dev->interrupt_in_endpoint->bEndpointAddress), + dev->interrupt_in_buffer, + usb_endpoint_maxp(dev->interrupt_in_endpoint), + tower_interrupt_in_callback, + dev, + dev->interrupt_in_interval); + dev->interrupt_in_done = 0; mb(); - retval = usb_submit_urb (dev->interrupt_in_urb, GFP_KERNEL); + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL); if (retval) { dev_err(&dev->udev->dev, "Couldn't submit interrupt_in_urb %d\n", retval); - dev->interrupt_in_running = 0; goto unlock_exit; } @@ -407,13 +401,12 @@ exit: /** * tower_release */ -static int tower_release (struct inode *inode, struct file *file) +static int tower_release(struct inode *inode, struct file *file) { struct lego_usb_tower *dev; int retval = 0; dev = file->private_data; - if (dev == NULL) { retval = -ENODEV; goto exit; @@ -421,56 +414,32 @@ static int tower_release (struct inode *inode, struct file *file) mutex_lock(&dev->lock); - if (dev->open_count != 1) { - dev_dbg(&dev->udev->dev, "%s: device not opened exactly once\n", - __func__); - retval = -ENODEV; - goto unlock_exit; - } - if (dev->disconnected) { /* the device was unplugged before the file was released */ /* unlock here as tower_delete frees dev */ mutex_unlock(&dev->lock); - tower_delete (dev); + tower_delete(dev); goto exit; } /* wait until write transfer is finished */ if (dev->interrupt_out_busy) { - wait_event_interruptible_timeout (dev->write_wait, !dev->interrupt_out_busy, 2 * HZ); + wait_event_interruptible_timeout(dev->write_wait, !dev->interrupt_out_busy, + 2 * HZ); } - tower_abort_transfers (dev); + + /* shutdown transfers */ + usb_kill_urb(dev->interrupt_in_urb); + usb_kill_urb(dev->interrupt_out_urb); + dev->open_count = 0; -unlock_exit: mutex_unlock(&dev->lock); exit: return retval; } - -/** - * tower_abort_transfers - * aborts transfers and frees associated data structures - */ -static void tower_abort_transfers (struct lego_usb_tower *dev) -{ - if (dev == NULL) - return; - - /* shutdown transfer */ - if (dev->interrupt_in_running) { - dev->interrupt_in_running = 0; - mb(); - usb_kill_urb(dev->interrupt_in_urb); - } - if (dev->interrupt_out_busy) - usb_kill_urb(dev->interrupt_out_urb); -} - - /** * tower_check_for_read_packet * @@ -479,23 +448,23 @@ static void tower_abort_transfers (struct lego_usb_tower *dev) * until it has been there unchanged for at least * dev->packet_timeout_jiffies, or until the buffer is full. */ -static void tower_check_for_read_packet (struct lego_usb_tower *dev) +static void tower_check_for_read_packet(struct lego_usb_tower *dev) { - spin_lock_irq (&dev->read_buffer_lock); + spin_lock_irq(&dev->read_buffer_lock); if (!packet_timeout || time_after(jiffies, dev->read_last_arrival + dev->packet_timeout_jiffies) || dev->read_buffer_length == read_buffer_size) { dev->read_packet_length = dev->read_buffer_length; } dev->interrupt_in_done = 0; - spin_unlock_irq (&dev->read_buffer_lock); + spin_unlock_irq(&dev->read_buffer_lock); } /** * tower_poll */ -static __poll_t tower_poll (struct file *file, poll_table *wait) +static __poll_t tower_poll(struct file *file, poll_table *wait) { struct lego_usb_tower *dev; __poll_t mask = 0; @@ -509,12 +478,10 @@ static __poll_t tower_poll (struct file *file, poll_table *wait) poll_wait(file, &dev->write_wait, wait); tower_check_for_read_packet(dev); - if (dev->read_packet_length > 0) { + if (dev->read_packet_length > 0) mask |= EPOLLIN | EPOLLRDNORM; - } - if (!dev->interrupt_out_busy) { + if (!dev->interrupt_out_busy) mask |= EPOLLOUT | EPOLLWRNORM; - } return mask; } @@ -523,7 +490,7 @@ static __poll_t tower_poll (struct file *file, poll_table *wait) /** * tower_llseek */ -static loff_t tower_llseek (struct file *file, loff_t off, int whence) +static loff_t tower_llseek(struct file *file, loff_t off, int whence) { return -ESPIPE; /* unseekable */ } @@ -532,7 +499,7 @@ static loff_t tower_llseek (struct file *file, loff_t off, int whence) /** * tower_read */ -static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, loff_t *ppos) +static ssize_t tower_read(struct file *file, char __user *buffer, size_t count, loff_t *ppos) { struct lego_usb_tower *dev; size_t bytes_to_read; @@ -551,7 +518,6 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, /* verify that the device wasn't unplugged */ if (dev->disconnected) { retval = -ENODEV; - pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -561,21 +527,19 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, goto unlock_exit; } - if (read_timeout) { + if (read_timeout) timeout = jiffies + msecs_to_jiffies(read_timeout); - } /* wait for data */ - tower_check_for_read_packet (dev); + tower_check_for_read_packet(dev); while (dev->read_packet_length == 0) { if (file->f_flags & O_NONBLOCK) { retval = -EAGAIN; goto unlock_exit; } retval = wait_event_interruptible_timeout(dev->read_wait, dev->interrupt_in_done, dev->packet_timeout_jiffies); - if (retval < 0) { + if (retval < 0) goto unlock_exit; - } /* reset read timeout during read or write activity */ if (read_timeout @@ -583,28 +547,27 @@ static ssize_t tower_read (struct file *file, char __user *buffer, size_t count, timeout = jiffies + msecs_to_jiffies(read_timeout); } /* check for read timeout */ - if (read_timeout && time_after (jiffies, timeout)) { + if (read_timeout && time_after(jiffies, timeout)) { retval = -ETIMEDOUT; goto unlock_exit; } - tower_check_for_read_packet (dev); + tower_check_for_read_packet(dev); } /* copy the data from read_buffer into userspace */ bytes_to_read = min(count, dev->read_packet_length); - if (copy_to_user (buffer, dev->read_buffer, bytes_to_read)) { + if (copy_to_user(buffer, dev->read_buffer, bytes_to_read)) { retval = -EFAULT; goto unlock_exit; } - spin_lock_irq (&dev->read_buffer_lock); + spin_lock_irq(&dev->read_buffer_lock); dev->read_buffer_length -= bytes_to_read; dev->read_packet_length -= bytes_to_read; - for (i=0; i<dev->read_buffer_length; i++) { + for (i = 0; i < dev->read_buffer_length; i++) dev->read_buffer[i] = dev->read_buffer[i+bytes_to_read]; - } - spin_unlock_irq (&dev->read_buffer_lock); + spin_unlock_irq(&dev->read_buffer_lock); retval = bytes_to_read; @@ -620,7 +583,7 @@ exit: /** * tower_write */ -static ssize_t tower_write (struct file *file, const char __user *buffer, size_t count, loff_t *ppos) +static ssize_t tower_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos) { struct lego_usb_tower *dev; size_t bytes_to_write; @@ -637,7 +600,6 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t /* verify that the device wasn't unplugged */ if (dev->disconnected) { retval = -ENODEV; - pr_err("No device or device unplugged %d\n", retval); goto unlock_exit; } @@ -653,10 +615,10 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t retval = -EAGAIN; goto unlock_exit; } - retval = wait_event_interruptible (dev->write_wait, !dev->interrupt_out_busy); - if (retval) { + retval = wait_event_interruptible(dev->write_wait, + !dev->interrupt_out_busy); + if (retval) goto unlock_exit; - } } /* write the data into interrupt_out_buffer from userspace */ @@ -664,7 +626,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t dev_dbg(&dev->udev->dev, "%s: count = %zd, bytes_to_write = %zd\n", __func__, count, bytes_to_write); - if (copy_from_user (dev->interrupt_out_buffer, buffer, bytes_to_write)) { + if (copy_from_user(dev->interrupt_out_buffer, buffer, bytes_to_write)) { retval = -EFAULT; goto unlock_exit; } @@ -682,7 +644,7 @@ static ssize_t tower_write (struct file *file, const char __user *buffer, size_t dev->interrupt_out_busy = 1; wmb(); - retval = usb_submit_urb (dev->interrupt_out_urb, GFP_KERNEL); + retval = usb_submit_urb(dev->interrupt_out_urb, GFP_KERNEL); if (retval) { dev->interrupt_out_busy = 0; dev_err(&dev->udev->dev, @@ -703,7 +665,7 @@ exit: /** * tower_interrupt_in_callback */ -static void tower_interrupt_in_callback (struct urb *urb) +static void tower_interrupt_in_callback(struct urb *urb) { struct lego_usb_tower *dev = urb->context; int status = urb->status; @@ -729,9 +691,9 @@ static void tower_interrupt_in_callback (struct urb *urb) if (urb->actual_length > 0) { spin_lock_irqsave(&dev->read_buffer_lock, flags); if (dev->read_buffer_length + urb->actual_length < read_buffer_size) { - memcpy (dev->read_buffer + dev->read_buffer_length, - dev->interrupt_in_buffer, - urb->actual_length); + memcpy(dev->read_buffer + dev->read_buffer_length, + dev->interrupt_in_buffer, + urb->actual_length); dev->read_buffer_length += urb->actual_length; dev->read_last_arrival = jiffies; dev_dbg(&dev->udev->dev, "%s: received %d bytes\n", @@ -744,25 +706,21 @@ static void tower_interrupt_in_callback (struct urb *urb) } resubmit: - /* resubmit if we're still running */ - if (dev->interrupt_in_running) { - retval = usb_submit_urb (dev->interrupt_in_urb, GFP_ATOMIC); - if (retval) - dev_err(&dev->udev->dev, - "%s: usb_submit_urb failed (%d)\n", - __func__, retval); + retval = usb_submit_urb(dev->interrupt_in_urb, GFP_ATOMIC); + if (retval) { + dev_err(&dev->udev->dev, "%s: usb_submit_urb failed (%d)\n", + __func__, retval); } - exit: dev->interrupt_in_done = 1; - wake_up_interruptible (&dev->read_wait); + wake_up_interruptible(&dev->read_wait); } /** * tower_interrupt_out_callback */ -static void tower_interrupt_out_callback (struct urb *urb) +static void tower_interrupt_out_callback(struct urb *urb) { struct lego_usb_tower *dev = urb->context; int status = urb->status; @@ -790,48 +748,27 @@ static void tower_interrupt_out_callback (struct urb *urb) * Called by the usb core when a new device is connected that it thinks * this driver might be interested in. */ -static int tower_probe (struct usb_interface *interface, const struct usb_device_id *id) +static int tower_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct device *idev = &interface->dev; struct usb_device *udev = interface_to_usbdev(interface); - struct lego_usb_tower *dev = NULL; + struct lego_usb_tower *dev; struct tower_get_version_reply *get_version_reply = NULL; int retval = -ENOMEM; int result; /* allocate memory for our device state and initialize it */ - - dev = kmalloc (sizeof(struct lego_usb_tower), GFP_KERNEL); - + dev = kzalloc(sizeof(*dev), GFP_KERNEL); if (!dev) goto exit; mutex_init(&dev->lock); - dev->udev = usb_get_dev(udev); - dev->open_count = 0; - dev->disconnected = 0; - - dev->read_buffer = NULL; - dev->read_buffer_length = 0; - dev->read_packet_length = 0; - spin_lock_init (&dev->read_buffer_lock); + spin_lock_init(&dev->read_buffer_lock); dev->packet_timeout_jiffies = msecs_to_jiffies(packet_timeout); dev->read_last_arrival = jiffies; - - init_waitqueue_head (&dev->read_wait); - init_waitqueue_head (&dev->write_wait); - - dev->interrupt_in_buffer = NULL; - dev->interrupt_in_endpoint = NULL; - dev->interrupt_in_urb = NULL; - dev->interrupt_in_running = 0; - dev->interrupt_in_done = 0; - - dev->interrupt_out_buffer = NULL; - dev->interrupt_out_endpoint = NULL; - dev->interrupt_out_urb = NULL; - dev->interrupt_out_busy = 0; + init_waitqueue_head(&dev->read_wait); + init_waitqueue_head(&dev->write_wait); result = usb_find_common_endpoints_reverse(interface->cur_altsetting, NULL, NULL, @@ -843,16 +780,16 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device goto error; } - dev->read_buffer = kmalloc (read_buffer_size, GFP_KERNEL); + dev->read_buffer = kmalloc(read_buffer_size, GFP_KERNEL); if (!dev->read_buffer) goto error; - dev->interrupt_in_buffer = kmalloc (usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); + dev->interrupt_in_buffer = kmalloc(usb_endpoint_maxp(dev->interrupt_in_endpoint), GFP_KERNEL); if (!dev->interrupt_in_buffer) goto error; dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->interrupt_in_urb) goto error; - dev->interrupt_out_buffer = kmalloc (write_buffer_size, GFP_KERNEL); + dev->interrupt_out_buffer = kmalloc(write_buffer_size, GFP_KERNEL); if (!dev->interrupt_out_buffer) goto error; dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL); @@ -862,22 +799,21 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device dev->interrupt_out_interval = interrupt_out_interval ? interrupt_out_interval : dev->interrupt_out_endpoint->bInterval; get_version_reply = kmalloc(sizeof(*get_version_reply), GFP_KERNEL); - if (!get_version_reply) { retval = -ENOMEM; goto error; } /* get the firmware version and log it */ - result = usb_control_msg (udev, - usb_rcvctrlpipe(udev, 0), - LEGO_USB_TOWER_REQUEST_GET_VERSION, - USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, - 0, - 0, - get_version_reply, - sizeof(*get_version_reply), - 1000); + result = usb_control_msg(udev, + usb_rcvctrlpipe(udev, 0), + LEGO_USB_TOWER_REQUEST_GET_VERSION, + USB_TYPE_VENDOR | USB_DIR_IN | USB_RECIP_DEVICE, + 0, + 0, + get_version_reply, + sizeof(*get_version_reply), + 1000); if (result != sizeof(*get_version_reply)) { if (result >= 0) result = -EIO; @@ -892,10 +828,9 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device le16_to_cpu(get_version_reply->build_no)); /* we can register the device now, as it is ready */ - usb_set_intfdata (interface, dev); - - retval = usb_register_dev (interface, &tower_class); + usb_set_intfdata(interface, dev); + retval = usb_register_dev(interface, &tower_class); if (retval) { /* something prevented us from registering this driver */ dev_err(idev, "Not able to get a minor for this device.\n"); @@ -924,17 +859,17 @@ error: * * Called by the usb core when the device is removed from the system. */ -static void tower_disconnect (struct usb_interface *interface) +static void tower_disconnect(struct usb_interface *interface) { struct lego_usb_tower *dev; int minor; - dev = usb_get_intfdata (interface); + dev = usb_get_intfdata(interface); minor = dev->minor; /* give back our minor and prevent further open() */ - usb_deregister_dev (interface, &tower_class); + usb_deregister_dev(interface, &tower_class); /* stop I/O */ usb_poison_urb(dev->interrupt_in_urb); @@ -945,7 +880,7 @@ static void tower_disconnect (struct usb_interface *interface) /* if the device is not opened, then we clean up right now */ if (!dev->open_count) { mutex_unlock(&dev->lock); - tower_delete (dev); + tower_delete(dev); } else { dev->disconnected = 1; /* wake up pollers */ @@ -962,6 +897,4 @@ module_usb_driver(tower_driver); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); -#ifdef MODULE_LICENSE MODULE_LICENSE("GPL"); -#endif diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig index 9b632ab24f03..c16121276a21 100644 --- a/drivers/usb/misc/sisusbvga/Kconfig +++ b/drivers/usb/misc/sisusbvga/Kconfig @@ -4,7 +4,7 @@ config USB_SISUSBVGA tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)" depends on (USB_MUSB_HDRC || USB_EHCI_HCD) select FONT_SUPPORT if USB_SISUSBVGA_CON - ---help--- + ---help--- Say Y here if you intend to attach a USB2VGA dongle based on a Net2280 and a SiS315 chip. diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 6ca9111d150a..10c9e7f6273e 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -17,6 +17,7 @@ #include <linux/module.h> #include <linux/nls.h> #include <linux/of_device.h> +#include <linux/regulator/consumer.h> #include <linux/slab.h> /* Internal Register Set Addresses & Default Values acc. to DS00001692C */ @@ -26,10 +27,6 @@ #define USB251XB_ADDR_PRODUCT_ID_LSB 0x02 #define USB251XB_ADDR_PRODUCT_ID_MSB 0x03 -#define USB251XB_DEF_PRODUCT_ID_12 0x2512 /* USB2512B/12Bi */ -#define USB251XB_DEF_PRODUCT_ID_13 0x2513 /* USB2513B/13Bi */ -#define USB251XB_DEF_PRODUCT_ID_14 0x2514 /* USB2514B/14Bi */ -#define USB251XB_DEF_PRODUCT_ID_17 0x2517 /* USB2517/17i */ #define USB251XB_ADDR_DEVICE_ID_LSB 0x04 #define USB251XB_ADDR_DEVICE_ID_MSB 0x05 @@ -74,7 +71,6 @@ #define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14 #define USB251XB_ADDR_PRODUCT_STRING 0x54 -#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i" #define USB251XB_ADDR_SERIAL_STRING_LEN 0x15 #define USB251XB_ADDR_SERIAL_STRING 0x92 @@ -116,6 +112,7 @@ struct usb251xb { struct device *dev; struct i2c_client *i2c; + struct regulator *vdd; u8 skip_config; struct gpio_desc *gpio_reset; u16 vendor_id; @@ -159,6 +156,14 @@ struct usb251xb_data { char product_str[USB251XB_STRING_BUFSIZE / 2]; /* ASCII string */ }; +static const struct usb251xb_data usb2422_data = { + .product_id = 0x2422, + .port_cnt = 2, + .led_support = false, + .bat_support = true, + .product_str = "USB2422", +}; + static const struct usb251xb_data usb2512b_data = { .product_id = 0x2512, .port_cnt = 2, @@ -261,20 +266,19 @@ static int usb251x_check_gpio_chip(struct usb251xb *hub) } #endif -static void usb251xb_reset(struct usb251xb *hub, int state) +static void usb251xb_reset(struct usb251xb *hub) { if (!hub->gpio_reset) return; i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT); - gpiod_set_value_cansleep(hub->gpio_reset, state); + gpiod_set_value_cansleep(hub->gpio_reset, 1); + usleep_range(1, 10); /* >=1us RESET_N asserted */ + gpiod_set_value_cansleep(hub->gpio_reset, 0); /* wait for hub recovery/stabilization */ - if (!state) - usleep_range(500, 750); /* >=500us at power on */ - else - usleep_range(1, 10); /* >=1us at power down */ + usleep_range(500, 750); /* >=500us after RESET_N deasserted */ i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT); } @@ -292,7 +296,7 @@ static int usb251xb_connect(struct usb251xb *hub) i2c_wb[0] = 0x01; i2c_wb[1] = USB251XB_STATUS_COMMAND_ATTACH; - usb251xb_reset(hub, 0); + usb251xb_reset(hub); err = i2c_smbus_write_i2c_block_data(hub->i2c, USB251XB_ADDR_STATUS_COMMAND, 2, i2c_wb); @@ -342,7 +346,7 @@ static int usb251xb_connect(struct usb251xb *hub) i2c_wb[USB251XB_ADDR_PORT_MAP_7] = hub->port_map7; i2c_wb[USB251XB_ADDR_STATUS_COMMAND] = USB251XB_STATUS_COMMAND_ATTACH; - usb251xb_reset(hub, 0); + usb251xb_reset(hub); /* write registers */ for (i = 0; i < (USB251XB_I2C_REG_SZ / USB251XB_I2C_WRITE_SZ); i++) { @@ -420,6 +424,10 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, return err; } + hub->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(hub->vdd)) + return PTR_ERR(hub->vdd); + if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1)) hub->vendor_id = USB251XB_DEF_VENDOR_ID; @@ -593,6 +601,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, static const struct of_device_id usb251xb_of_match[] = { { + .compatible = "microchip,usb2422", + .data = &usb2422_data, + }, { .compatible = "microchip,usb2512b", .data = &usb2512b_data, }, { @@ -665,6 +676,10 @@ static int usb251xb_probe(struct usb251xb *hub) if (err) return err; + err = regulator_enable(hub->vdd); + if (err) + return err; + err = usb251xb_connect(hub); if (err) { dev_err(dev, "Failed to connect hub (%d)\n", err); @@ -692,7 +707,31 @@ static int usb251xb_i2c_probe(struct i2c_client *i2c, return usb251xb_probe(hub); } +static int __maybe_unused usb251xb_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct usb251xb *hub = i2c_get_clientdata(client); + + return regulator_disable(hub->vdd); +} + +static int __maybe_unused usb251xb_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct usb251xb *hub = i2c_get_clientdata(client); + int err; + + err = regulator_enable(hub->vdd); + if (err) + return err; + + return usb251xb_connect(hub); +} + +static SIMPLE_DEV_PM_OPS(usb251xb_pm_ops, usb251xb_suspend, usb251xb_resume); + static const struct i2c_device_id usb251xb_id[] = { + { "usb2422", 0 }, { "usb2512b", 0 }, { "usb2512bi", 0 }, { "usb2513b", 0 }, @@ -709,6 +748,7 @@ static struct i2c_driver usb251xb_i2c_driver = { .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(usb251xb_of_match), + .pm = &usb251xb_pm_ops, }, .probe = usb251xb_i2c_probe, .id_table = usb251xb_id, |