4 files changed, 32 insertions, 28 deletions

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 35616ffbe3ae..6dc238c592bc 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1022,44 +1022,24 @@ void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
  * is attached to (or the roothub port its ancestor hub is attached to).  All we
  * know is the index of that port under either the USB 2.0 or the USB 3.0
  * roothub, but that doesn't give us the real index into the HW port status
- * registers.  Scan through the xHCI roothub port array, looking for the Nth
- * entry of the correct port speed.  Return the port number of that entry.
+ * registers. Call xhci_find_raw_port_number() to get real index.
  */
 static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
 		struct usb_device *udev)
 {
 	struct usb_device *top_dev;
-	unsigned int num_similar_speed_ports;
-	unsigned int faked_port_num;
-	int i;
+	struct usb_hcd *hcd;
+
+	if (udev->speed == USB_SPEED_SUPER)
+		hcd = xhci->shared_hcd;
+	else
+		hcd = xhci->main_hcd;
 
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	faked_port_num = top_dev->portnum;
-	for (i = 0, num_similar_speed_ports = 0;
-			i < HCS_MAX_PORTS(xhci->hcs_params1); i++) {
-		u8 port_speed = xhci->port_array[i];
-
-		/*
-		 * Skip ports that don't have known speeds, or have duplicate
-		 * Extended Capabilities port speed entries.
-		 */
-		if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
-			continue;
 
-		/*
-		 * USB 3.0 ports are always under a USB 3.0 hub.  USB 2.0 and
-		 * 1.1 ports are under the USB 2.0 hub.  If the port speed
-		 * matches the device speed, it's a similar speed port.
-		 */
-		if ((port_speed == 0x03) == (udev->speed == USB_SPEED_SUPER))
-			num_similar_speed_ports++;
-		if (num_similar_speed_ports == faked_port_num)
-			/* Roothub ports are numbered from 1 to N */
-			return i+1;
-	}
-	return 0;
+	return	xhci_find_raw_port_number(hcd, top_dev->portnum);
 }
 
 /* Setup an xHCI virtual device for a Set Address command */
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index af259e0ec172..1a30c380043c 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -313,6 +313,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
 	.enable_usb3_lpm_timeout =	xhci_enable_usb3_lpm_timeout,
 	.disable_usb3_lpm_timeout =	xhci_disable_usb3_lpm_timeout,
+	.find_raw_port_number =	xhci_find_raw_port_number,
 };
 
 /*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 849470b18831..53b8f89a0b1c 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3779,6 +3779,28 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	return 0;
 }
 
+/*
+ * Transfer the port index into real index in the HW port status
+ * registers. Caculate offset between the port's PORTSC register
+ * and port status base. Divide the number of per port register
+ * to get the real index. The raw port number bases 1.
+ */
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1)
+{
+	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+	__le32 __iomem *base_addr = &xhci->op_regs->port_status_base;
+	__le32 __iomem *addr;
+	int raw_port;
+
+	if (hcd->speed != HCD_USB3)
+		addr = xhci->usb2_ports[port1 - 1];
+	else
+		addr = xhci->usb3_ports[port1 - 1];
+
+	raw_port = (addr - base_addr)/NUM_PORT_REGS + 1;
+	return raw_port;
+}
+
 #ifdef CONFIG_USB_SUSPEND
 
 /* BESL to HIRD Encoding array for USB2 LPM */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2c510e4a7d4c..d798b6931914 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1829,6 +1829,7 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
+int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
 
 #ifdef CONFIG_PM
 int xhci_bus_suspend(struct usb_hcd *hcd);