diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 184 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-pci.c | 8 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-sh.c | 3 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-xilinx-of.c | 4 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hub.c | 2 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 44 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-mem.c | 74 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 11 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.c | 10 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 6 |
11 files changed, 262 insertions, 86 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index b100f5f9f4b6..800be38c78b4 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -671,7 +671,9 @@ static int ehci_init(struct usb_hcd *hcd) hw = ehci->async->hw; hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); +#if defined(CONFIG_PPC_PS3) hw->hw_info1 |= cpu_to_hc32(ehci, (1 << 7)); /* I = 1 */ +#endif hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); hw->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index a44294d13494..c30435499a02 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -43,6 +43,7 @@ #include <linux/regulator/consumer.h> #include <linux/pm_runtime.h> #include <linux/gpio.h> +#include <linux/clk.h> /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -55,6 +56,15 @@ #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0 +/* Errata i693 */ +static struct clk *utmi_p1_fck; +static struct clk *utmi_p2_fck; +static struct clk *xclk60mhsp1_ck; +static struct clk *xclk60mhsp2_ck; +static struct clk *usbhost_p1_fck; +static struct clk *usbhost_p2_fck; +static struct clk *init_60m_fclk; + /*-------------------------------------------------------------------------*/ static const struct hc_driver ehci_omap_hc_driver; @@ -70,6 +80,41 @@ static inline u32 ehci_read(void __iomem *base, u32 reg) return __raw_readl(base + reg); } +/* Erratum i693 workaround sequence */ +static void omap_ehci_erratum_i693(struct ehci_hcd *ehci) +{ + int ret = 0; + + /* Switch to the internal 60 MHz clock */ + ret = clk_set_parent(utmi_p1_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, init_60m_fclk); + if (ret != 0) + ehci_err(ehci, "init_60m_fclk set parent" + "failed error:%d\n", ret); + + clk_enable(usbhost_p1_fck); + clk_enable(usbhost_p2_fck); + + /* Wait 1ms and switch back to the external clock */ + mdelay(1); + ret = clk_set_parent(utmi_p1_fck, xclk60mhsp1_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp1_ck set parent" + "failed error:%d\n", ret); + + ret = clk_set_parent(utmi_p2_fck, xclk60mhsp2_ck); + if (ret != 0) + ehci_err(ehci, "xclk60mhsp2_ck set parent" + "failed error:%d\n", ret); + + clk_disable(usbhost_p1_fck); + clk_disable(usbhost_p2_fck); +} + static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) { struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev); @@ -100,6 +145,50 @@ static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port) } } +static int omap_ehci_hub_control( + struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength +) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *status_reg = &ehci->regs->port_status[ + (wIndex & 0xff) - 1]; + u32 temp; + unsigned long flags; + int retval = 0; + + spin_lock_irqsave(&ehci->lock, flags); + + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) { + temp = ehci_readl(ehci, status_reg); + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) { + retval = -EPIPE; + goto done; + } + + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + + omap_ehci_erratum_i693(ehci); + + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports); + goto done; + } + + spin_unlock_irqrestore(&ehci->lock, flags); + + /* Handle the hub control events here */ + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength); +done: + spin_unlock_irqrestore(&ehci->lock, flags); + return retval; +} + static void disable_put_regulator( struct ehci_hcd_omap_platform_data *pdata) { @@ -192,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + /* Hold PHYs in reset while initializing EHCI controller */ if (pdata->phy_reset) { if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_request_one(pdata->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_request_one(pdata->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); /* Hold the PHY in RESET for enough time till DIR is high */ udelay(10); @@ -241,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ehci_reset(omap_ehci); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till @@ -255,17 +348,79 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); + /* root ports should always stay powered */ + ehci_port_power(omap_ehci, 1); + + /* get clocks */ + utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk"); + if (IS_ERR(utmi_p1_fck)) { + ret = PTR_ERR(utmi_p1_fck); + dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret); goto err_add_hcd; } - /* root ports should always stay powered */ - ehci_port_power(omap_ehci, 1); + xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck"); + if (IS_ERR(xclk60mhsp1_ck)) { + ret = PTR_ERR(xclk60mhsp1_ck); + dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret); + goto err_utmi_p1_fck; + } + + utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk"); + if (IS_ERR(utmi_p2_fck)) { + ret = PTR_ERR(utmi_p2_fck); + dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret); + goto err_xclk60mhsp1_ck; + } + + xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck"); + if (IS_ERR(xclk60mhsp2_ck)) { + ret = PTR_ERR(xclk60mhsp2_ck); + dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret); + goto err_utmi_p2_fck; + } + + usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk"); + if (IS_ERR(usbhost_p1_fck)) { + ret = PTR_ERR(usbhost_p1_fck); + dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret); + goto err_xclk60mhsp2_ck; + } + + usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk"); + if (IS_ERR(usbhost_p2_fck)) { + ret = PTR_ERR(usbhost_p2_fck); + dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret); + goto err_usbhost_p1_fck; + } + + init_60m_fclk = clk_get(dev, "init_60m_fclk"); + if (IS_ERR(init_60m_fclk)) { + ret = PTR_ERR(init_60m_fclk); + dev_err(dev, "init_60m_fclk failed error:%d\n", ret); + goto err_usbhost_p2_fck; + } return 0; +err_usbhost_p2_fck: + clk_put(usbhost_p2_fck); + +err_usbhost_p1_fck: + clk_put(usbhost_p1_fck); + +err_xclk60mhsp2_ck: + clk_put(xclk60mhsp2_ck); + +err_utmi_p2_fck: + clk_put(utmi_p2_fck); + +err_xclk60mhsp1_ck: + clk_put(xclk60mhsp1_ck); + +err_utmi_p1_fck: + clk_put(utmi_p1_fck); + err_add_hcd: disable_put_regulator(pdata); pm_runtime_put_sync(dev); @@ -294,6 +449,15 @@ static int ehci_hcd_omap_remove(struct platform_device *pdev) disable_put_regulator(dev->platform_data); iounmap(hcd->regs); usb_put_hcd(hcd); + + clk_put(utmi_p1_fck); + clk_put(utmi_p2_fck); + clk_put(xclk60mhsp1_ck); + clk_put(xclk60mhsp2_ck); + clk_put(usbhost_p1_fck); + clk_put(usbhost_p2_fck); + clk_put(init_60m_fclk); + pm_runtime_put_sync(dev); pm_runtime_disable(dev); @@ -364,7 +528,7 @@ static const struct hc_driver ehci_omap_hc_driver = { * root hub support */ .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, + .hub_control = omap_ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bc94d7bf072d..123481793a47 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,14 +144,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } - if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { - /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ - if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { - ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); - hcd->broken_pci_sleep = 1; - device_set_wakeup_capable(&pdev->dev, false); - } - } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index ca819cdd0c5e..e7cb3925abf8 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -126,8 +126,7 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - if (pdev->dev.platform_data != NULL) - pdata = pdev->dev.platform_data; + pdata = pdev->dev.platform_data; /* initialize hcd */ hcd = usb_create_hcd(&ehci_sh_hc_driver, &pdev->dev, diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index 9c2cc4633894..e9713d589e30 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -270,14 +270,12 @@ static int ehci_hcd_xilinx_of_remove(struct platform_device *op) * * Properly shutdown the hcd, call driver's shutdown routine. */ -static int ehci_hcd_xilinx_of_shutdown(struct platform_device *op) +static void ehci_hcd_xilinx_of_shutdown(struct platform_device *op) { struct usb_hcd *hcd = dev_get_drvdata(&op->dev); if (hcd->driver->shutdown) hcd->driver->shutdown(hcd); - - return 0; } diff --git a/drivers/usb/host/ohci-hub.c b/drivers/usb/host/ohci-hub.c index 836772dfabd3..2f3619eefefa 100644 --- a/drivers/usb/host/ohci-hub.c +++ b/drivers/usb/host/ohci-hub.c @@ -317,7 +317,7 @@ static int ohci_bus_resume (struct usb_hcd *hcd) } /* Carry out the final steps of resuming the controller device */ -static void ohci_finish_controller_resume(struct usb_hcd *hcd) +static void __maybe_unused ohci_finish_controller_resume(struct usb_hcd *hcd) { struct ohci_hcd *ohci = hcd_to_ohci(hcd); int port; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 2732ef660c5c..7b01094d7993 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -462,6 +462,42 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, } } +/* Updates Link Status for super Speed port */ +static void xhci_hub_report_link_state(u32 *status, u32 status_reg) +{ + u32 pls = status_reg & PORT_PLS_MASK; + + /* resume state is a xHCI internal state. + * Do not report it to usb core. + */ + if (pls == XDEV_RESUME) + return; + + /* When the CAS bit is set then warm reset + * should be performed on port + */ + if (status_reg & PORT_CAS) { + /* The CAS bit can be set while the port is + * in any link state. + * Only roothubs have CAS bit, so we + * pretend to be in compliance mode + * unless we're already in compliance + * or the inactive state. + */ + if (pls != USB_SS_PORT_LS_COMP_MOD && + pls != USB_SS_PORT_LS_SS_INACTIVE) { + pls = USB_SS_PORT_LS_COMP_MOD; + } + /* Return also connection bit - + * hub state machine resets port + * when this bit is set. + */ + pls |= USB_PORT_STAT_CONNECTION; + } + /* update status field */ + *status |= pls; +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -606,13 +642,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, else status |= USB_PORT_STAT_POWER; } - /* Port Link State */ + /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { - /* resume state is a xHCI internal state. - * Do not report it to usb core. - */ - if ((temp & PORT_PLS_MASK) != XDEV_RESUME) - status |= (temp & PORT_PLS_MASK); + xhci_hub_report_link_state(&status, temp); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index ec4338eec826..77689bd64cac 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -793,10 +793,9 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, int slot_id) { - struct list_head *tt; struct list_head *tt_list_head; - struct list_head *tt_next; - struct xhci_tt_bw_info *tt_info; + struct xhci_tt_bw_info *tt_info, *next; + bool slot_found = false; /* If the device never made it past the Set Address stage, * it may not have the real_port set correctly. @@ -808,34 +807,16 @@ static void xhci_free_tt_info(struct xhci_hcd *xhci, } tt_list_head = &(xhci->rh_bw[virt_dev->real_port - 1].tts); - if (list_empty(tt_list_head)) - return; - - list_for_each(tt, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - if (tt_info->slot_id == slot_id) + list_for_each_entry_safe(tt_info, next, tt_list_head, tt_list) { + /* Multi-TT hubs will have more than one entry */ + if (tt_info->slot_id == slot_id) { + slot_found = true; + list_del(&tt_info->tt_list); + kfree(tt_info); + } else if (slot_found) { break; + } } - /* Cautionary measure in case the hub was disconnected before we - * stored the TT information. - */ - if (tt_info->slot_id != slot_id) - return; - - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - /* Multi-TT hubs will have more than one entry */ - do { - list_del(tt); - kfree(tt_info); - tt = tt_next; - if (list_empty(tt_list_head)) - break; - tt_next = tt->next; - tt_info = list_entry(tt, struct xhci_tt_bw_info, - tt_list); - } while (tt_info->slot_id == slot_id); } int xhci_alloc_tt_info(struct xhci_hcd *xhci, @@ -1791,17 +1772,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) { struct pci_dev *pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller); struct dev_info *dev_info, *next; - struct list_head *tt_list_head; - struct list_head *tt; - struct list_head *endpoints; - struct list_head *ep, *q; - struct xhci_tt_bw_info *tt_info; - struct xhci_interval_bw_table *bwt; - struct xhci_virt_ep *virt_ep; - unsigned long flags; int size; - int i; + int i, j, num_ports; /* Free the Event Ring Segment Table and the actual Event Ring */ size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries); @@ -1860,21 +1833,22 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } spin_unlock_irqrestore(&xhci->lock, flags); - bwt = &xhci->rh_bw->bw_table; - for (i = 0; i < XHCI_MAX_INTERVAL; i++) { - endpoints = &bwt->interval_bw[i].endpoints; - list_for_each_safe(ep, q, endpoints) { - virt_ep = list_entry(ep, struct xhci_virt_ep, bw_endpoint_list); - list_del(&virt_ep->bw_endpoint_list); - kfree(virt_ep); + num_ports = HCS_MAX_PORTS(xhci->hcs_params1); + for (i = 0; i < num_ports; i++) { + struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table; + for (j = 0; j < XHCI_MAX_INTERVAL; j++) { + struct list_head *ep = &bwt->interval_bw[j].endpoints; + while (!list_empty(ep)) + list_del_init(ep->next); } } - tt_list_head = &xhci->rh_bw->tts; - list_for_each_safe(tt, q, tt_list_head) { - tt_info = list_entry(tt, struct xhci_tt_bw_info, tt_list); - list_del(tt); - kfree(tt_info); + for (i = 0; i < num_ports; i++) { + struct xhci_tt_bw_info *tt, *n; + list_for_each_entry_safe(tt, n, &xhci->rh_bw[i].tts, tt_list) { + list_del(&tt->tt_list); + kfree(tt); + } } xhci->num_usb2_ports = 0; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 23b4aefd1036..8275645889da 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, num_trbs_free_temp = ep_ring->num_trbs_free; dequeue_temp = ep_ring->dequeue; + /* If we get two back-to-back stalls, and the first stalled transfer + * ends just before a link TRB, the dequeue pointer will be left on + * the link TRB by the code in the while loop. So we have to update + * the dequeue pointer one segment further, or we'll jump off + * the segment into la-la-land. + */ + if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) { + ep_ring->deq_seg = ep_ring->deq_seg->next; + ep_ring->dequeue = ep_ring->deq_seg->trbs; + } + while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { /* We have more usable TRBs */ ep_ring->num_trbs_free++; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index afdc73ee84a6..a979cd0dbe0f 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -795,8 +795,8 @@ int xhci_suspend(struct xhci_hcd *xhci) command = xhci_readl(xhci, &xhci->op_regs->command); command |= CMD_CSS; xhci_writel(xhci, command, &xhci->op_regs->command); - if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10*100)) { - xhci_warn(xhci, "WARN: xHC CMD_CSS timeout\n"); + if (handshake(xhci, &xhci->op_regs->status, STS_SAVE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC save state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -848,8 +848,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) command |= CMD_CRS; xhci_writel(xhci, command, &xhci->op_regs->command); if (handshake(xhci, &xhci->op_regs->status, - STS_RESTORE, 0, 10*100)) { - xhci_dbg(xhci, "WARN: xHC CMD_CSS timeout\n"); + STS_RESTORE, 0, 10 * 1000)) { + xhci_warn(xhci, "WARN: xHC restore state timeout\n"); spin_unlock_irq(&xhci->lock); return -ETIMEDOUT; } @@ -3906,7 +3906,7 @@ static u16 xhci_get_timeout_no_hub_lpm(struct usb_device *udev, default: dev_warn(&udev->dev, "%s: Can't get timeout for non-U1 or U2 state.\n", __func__); - return -EINVAL; + return USB3_LPM_DISABLED; } if (sel <= max_sel_pel && pel <= max_sel_pel) diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index de3d6e3e57be..55c0785810c9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -341,7 +341,11 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) -/* bit 24 reserved */ +/* Cold Attach Status - xHC can set this bit to report device attached during + * Sx state. Warm port reset should be perfomed to clear this bit and move port + * to connected state. + */ +#define PORT_CAS (1 << 24) /* wake on connect (enable) */ #define PORT_WKCONN_E (1 << 25) /* wake on disconnect (enable) */ |