diff options
Diffstat (limited to 'drivers/usb/host')
| -rw-r--r-- | drivers/usb/host/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-omap.c | 18 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-tegra.c | 20 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-tilegx.c | 214 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-hcd.c | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-omap.c | 7 | ||||
| -rw-r--r-- | drivers/usb/host/ohci-tilegx.c | 203 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 44 | ||||
| -rw-r--r-- | drivers/usb/host/xhci-ring.c | 11 | ||||
| -rw-r--r-- | drivers/usb/host/xhci.h | 6 |
11 files changed, 504 insertions, 31 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 83e58df29fe3..dcfaaa91a3fb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -308,7 +308,7 @@ config USB_OHCI_HCD config USB_OHCI_HCD_OMAP1 bool "OHCI support for OMAP1/2 chips" - depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2) + depends on USB_OHCI_HCD && ARCH_OMAP1 default y ---help--- Enables support for the OHCI controller on OMAP1/2 chips. diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 800be38c78b4..1d9401e0990a 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -1349,6 +1349,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ehci_msm_driver #endif +#ifdef CONFIG_TILE_USB +#include "ehci-tilegx.c" +#define PLATFORM_DRIVER ehci_hcd_tilegx_driver +#endif + #ifdef CONFIG_USB_EHCI_HCD_PMC_MSP #include "ehci-pmcmsp.c" #define PLATFORM_DRIVER ehci_hcd_msp_driver diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 17cfb8a1131c..c30435499a02 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -281,14 +281,13 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) } } + /* Hold PHYs in reset while initializing EHCI controller */ if (pdata->phy_reset) { if (gpio_is_valid(pdata->reset_gpio_port[0])) - gpio_request_one(pdata->reset_gpio_port[0], - GPIOF_OUT_INIT_LOW, "USB1 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[0], 0); if (gpio_is_valid(pdata->reset_gpio_port[1])) - gpio_request_one(pdata->reset_gpio_port[1], - GPIOF_OUT_INIT_LOW, "USB2 PHY reset"); + gpio_set_value_cansleep(pdata->reset_gpio_port[1], 0); /* Hold the PHY in RESET for enough time till DIR is high */ udelay(10); @@ -330,6 +329,11 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params); ehci_reset(omap_ehci); + ret = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "failed to add hcd with err %d\n", ret); + goto err_add_hcd; + } if (pdata->phy_reset) { /* Hold the PHY in RESET for enough time till @@ -344,12 +348,6 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) gpio_set_value_cansleep(pdata->reset_gpio_port[1], 1); } - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_err(dev, "failed to add hcd with err %d\n", ret); - goto err_add_hcd; - } - /* root ports should always stay powered */ ehci_port_power(omap_ehci, 1); diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 68548236ec42..ab8a3bf628e3 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -46,8 +46,8 @@ static void tegra_ehci_power_up(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - clk_enable(tegra->emc_clk); - clk_enable(tegra->clk); + clk_prepare_enable(tegra->emc_clk); + clk_prepare_enable(tegra->clk); tegra_usb_phy_power_on(tegra->phy); tegra->host_resumed = 1; } @@ -58,8 +58,8 @@ static void tegra_ehci_power_down(struct usb_hcd *hcd) tegra->host_resumed = 0; tegra_usb_phy_power_off(tegra->phy); - clk_disable(tegra->clk); - clk_disable(tegra->emc_clk); + clk_disable_unprepare(tegra->clk); + clk_disable_unprepare(tegra->emc_clk); } static int tegra_ehci_internal_port_reset( @@ -671,7 +671,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail_clk; } - err = clk_enable(tegra->clk); + err = clk_prepare_enable(tegra->clk); if (err) goto fail_clken; @@ -682,7 +682,7 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail_emc_clk; } - clk_enable(tegra->emc_clk); + clk_prepare_enable(tegra->emc_clk); clk_set_rate(tegra->emc_clk, 400000000); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -782,10 +782,10 @@ fail: fail_phy: iounmap(hcd->regs); fail_io: - clk_disable(tegra->emc_clk); + clk_disable_unprepare(tegra->emc_clk); clk_put(tegra->emc_clk); fail_emc_clk: - clk_disable(tegra->clk); + clk_disable_unprepare(tegra->clk); fail_clken: clk_put(tegra->clk); fail_clk: @@ -820,10 +820,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) tegra_usb_phy_close(tegra->phy); iounmap(hcd->regs); - clk_disable(tegra->clk); + clk_disable_unprepare(tegra->clk); clk_put(tegra->clk); - clk_disable(tegra->emc_clk); + clk_disable_unprepare(tegra->emc_clk); clk_put(tegra->emc_clk); kfree(tegra); diff --git a/drivers/usb/host/ehci-tilegx.c b/drivers/usb/host/ehci-tilegx.c new file mode 100644 index 000000000000..1d215cdb9dea --- /dev/null +++ b/drivers/usb/host/ehci-tilegx.c @@ -0,0 +1,214 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Tilera TILE-Gx USB EHCI host controller driver. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/usb/tilegx.h> +#include <linux/usb.h> + +#include <asm/homecache.h> + +#include <gxio/iorpc_usb_host.h> +#include <gxio/usb_host.h> + +static void tilegx_start_ehc(void) +{ +} + +static void tilegx_stop_ehc(void) +{ +} + +static int tilegx_ehci_setup(struct usb_hcd *hcd) +{ + int ret = ehci_init(hcd); + + /* + * Some drivers do: + * + * struct ehci_hcd *ehci = hcd_to_ehci(hcd); + * ehci->need_io_watchdog = 0; + * + * here, but since this is a new driver we're going to leave the + * watchdog enabled. Later we may try to turn it off and see + * whether we run into any problems. + */ + + return ret; +} + +static const struct hc_driver ehci_tilegx_hc_driver = { + .description = hcd_name, + .product_desc = "Tile-Gx EHCI", + .hcd_priv_size = sizeof(struct ehci_hcd), + + /* + * Generic hardware linkage. + */ + .irq = ehci_irq, + .flags = HCD_MEMORY | HCD_USB2, + + /* + * Basic lifecycle operations. + */ + .reset = tilegx_ehci_setup, + .start = ehci_run, + .stop = ehci_stop, + .shutdown = ehci_shutdown, + + /* + * Managing I/O requests and associated device resources. + */ + .urb_enqueue = ehci_urb_enqueue, + .urb_dequeue = ehci_urb_dequeue, + .endpoint_disable = ehci_endpoint_disable, + .endpoint_reset = ehci_endpoint_reset, + + /* + * Scheduling support. + */ + .get_frame_number = ehci_get_frame, + + /* + * Root hub support. + */ + .hub_status_data = ehci_hub_status_data, + .hub_control = ehci_hub_control, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, + + .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, +}; + +static int ehci_hcd_tilegx_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + pte_t pte = { 0 }; + int my_cpu = smp_processor_id(); + int ret; + + if (usb_disabled()) + return -ENODEV; + + /* + * Try to initialize our GXIO context; if we can't, the device + * doesn't exist. + */ + if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 1) != 0) + return -ENXIO; + + hcd = usb_create_hcd(&ehci_tilegx_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + /* + * We don't use rsrc_start to map in our registers, but seems like + * we ought to set it to something, so we use the register VA. + */ + hcd->rsrc_start = + (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx); + hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx); + hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx); + + tilegx_start_ehc(); + + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + ehci->regs = + hcd->regs + HC_LENGTH(ehci, readl(&ehci->caps->hc_capbase)); + /* cache this readonly data; minimize chip reads */ + ehci->hcs_params = readl(&ehci->caps->hcs_params); + + /* Create our IRQs and register them. */ + pdata->irq = create_irq(); + if (pdata->irq < 0) { + ret = -ENXIO; + goto err_no_irq; + } + + tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU); + + /* Configure interrupts. */ + ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx, + cpu_x(my_cpu), cpu_y(my_cpu), + KERNEL_PL, pdata->irq); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + /* Register all of our memory. */ + pte = pte_set_home(pte, PAGE_HOME_HASH); + ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + +err_have_irq: + destroy_irq(pdata->irq); +err_no_irq: + tilegx_stop_ehc(); + usb_put_hcd(hcd); + gxio_usb_host_destroy(&pdata->usb_ctx); + return ret; +} + +static int ehci_hcd_tilegx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + tilegx_stop_ehc(); + gxio_usb_host_destroy(&pdata->usb_ctx); + destroy_irq(pdata->irq); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void ehci_hcd_tilegx_drv_shutdown(struct platform_device *pdev) +{ + usb_hcd_platform_shutdown(pdev); + ehci_hcd_tilegx_drv_remove(pdev); +} + +static struct platform_driver ehci_hcd_tilegx_driver = { + .probe = ehci_hcd_tilegx_drv_probe, + .remove = ehci_hcd_tilegx_drv_remove, + .shutdown = ehci_hcd_tilegx_drv_shutdown, + .driver = { + .name = "tilegx-ehci", + .owner = THIS_MODULE, + } +}; + +MODULE_ALIAS("platform:tilegx-ehci"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index e0adf5c0cf55..2b1e8d84c873 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1100,6 +1100,11 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_octeon_driver #endif +#ifdef CONFIG_TILE_USB +#include "ohci-tilegx.c" +#define PLATFORM_DRIVER ohci_hcd_tilegx_driver +#endif + #ifdef CONFIG_USB_CNS3XXX_OHCI #include "ohci-cns3xxx.c" #define PLATFORM_DRIVER ohci_hcd_cns3xxx_driver diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 9ce35d0d9d5d..b02c344e2cc9 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -20,14 +20,15 @@ #include <linux/clk.h> #include <linux/gpio.h> -#include <mach/hardware.h> #include <asm/io.h> #include <asm/mach-types.h> #include <plat/mux.h> -#include <mach/irqs.h> #include <plat/fpga.h> -#include <plat/usb.h> + +#include <mach/hardware.h> +#include <mach/irqs.h> +#include <mach/usb.h> /* OMAP-1510 OHCI has its own MMU for DMA */ diff --git a/drivers/usb/host/ohci-tilegx.c b/drivers/usb/host/ohci-tilegx.c new file mode 100644 index 000000000000..1ae7b28a71c2 --- /dev/null +++ b/drivers/usb/host/ohci-tilegx.c @@ -0,0 +1,203 @@ +/* + * Copyright 2012 Tilera Corporation. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or + * NON INFRINGEMENT. See the GNU General Public License for + * more details. + */ + +/* + * Tilera TILE-Gx USB OHCI host controller driver. + */ + +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/usb/tilegx.h> +#include <linux/usb.h> + +#include <asm/homecache.h> + +#include <gxio/iorpc_usb_host.h> +#include <gxio/usb_host.h> + +static void tilegx_start_ohc(void) +{ +} + +static void tilegx_stop_ohc(void) +{ +} + +static int tilegx_ohci_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + ret = ohci_init(ohci); + if (ret < 0) + return ret; + + ret = ohci_run(ohci); + if (ret < 0) { + dev_err(hcd->self.controller, "can't start %s\n", + hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static const struct hc_driver ohci_tilegx_hc_driver = { + .description = hcd_name, + .product_desc = "Tile-Gx OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * Generic hardware linkage. + */ + .irq = ohci_irq, + .flags = HCD_MEMORY | HCD_LOCAL_MEM | HCD_USB11, + + /* + * Basic lifecycle operations. + */ + .start = tilegx_ohci_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * Managing I/O requests and associated device resources. + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * Scheduling support. + */ + .get_frame_number = ohci_get_frame, + + /* + * Root hub support. + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, + .start_port_reset = ohci_start_port_reset, +}; + +static int ohci_hcd_tilegx_drv_probe(struct platform_device *pdev) +{ + struct usb_hcd *hcd; + struct tilegx_usb_platform_data *pdata = pdev->dev.platform_data; + pte_t pte = { 0 }; + int my_cpu = smp_processor_id(); + int ret; + + if (usb_disabled()) + return -ENODEV; + + /* + * Try to initialize our GXIO context; if we can't, the device + * doesn't exist. + */ + if (gxio_usb_host_init(&pdata->usb_ctx, pdata->dev_index, 0) != 0) + return -ENXIO; + + hcd = usb_create_hcd(&ohci_tilegx_hc_driver, &pdev->dev, + dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + + /* + * We don't use rsrc_start to map in our registers, but seems like + * we ought to set it to something, so we use the register VA. + */ + hcd->rsrc_start = + (ulong) gxio_usb_host_get_reg_start(&pdata->usb_ctx); + hcd->rsrc_len = gxio_usb_host_get_reg_len(&pdata->usb_ctx); + hcd->regs = gxio_usb_host_get_reg_start(&pdata->usb_ctx); + + tilegx_start_ohc(); + + /* Create our IRQs and register them. */ + pdata->irq = create_irq(); + if (pdata->irq < 0) { + ret = -ENXIO; + goto err_no_irq; + } + + tile_irq_activate(pdata->irq, TILE_IRQ_PERCPU); + + /* Configure interrupts. */ + ret = gxio_usb_host_cfg_interrupt(&pdata->usb_ctx, + cpu_x(my_cpu), cpu_y(my_cpu), + KERNEL_PL, pdata->irq); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + /* Register all of our memory. */ + pte = pte_set_home(pte, PAGE_HOME_HASH); + ret = gxio_usb_host_register_client_memory(&pdata->usb_ctx, pte, 0); + if (ret) { + ret = -ENXIO; + goto err_have_irq; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + ret = usb_add_hcd(hcd, pdata->irq, IRQF_SHARED); + if (ret == 0) { + platform_set_drvdata(pdev, hcd); + return ret; + } + +err_have_irq: + destroy_irq(pdata->irq); +err_no_irq: + tilegx_stop_ohc(); + usb_put_hcd(hcd); + gxio_usb_host_destroy(&pdata->usb_ctx); + return ret; +} + +static int ohci_hcd_tilegx_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct tilegx_usb_platform_data* pdata = pdev->dev.platform_data; + + usb_remove_hcd(hcd); + usb_put_hcd(hcd); + tilegx_stop_ohc(); + gxio_usb_host_destroy(&pdata->usb_ctx); + destroy_irq(pdata->irq); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static void ohci_hcd_tilegx_drv_shutdown(struct platform_device *pdev) +{ + usb_hcd_platform_shutdown(pdev); + ohci_hcd_tilegx_drv_remove(pdev); +} + +static struct platform_driver ohci_hcd_tilegx_driver = { + .probe = ohci_hcd_tilegx_drv_probe, + .remove = ohci_hcd_tilegx_drv_remove, + .shutdown = ohci_hcd_tilegx_drv_shutdown, + .driver = { + .name = "tilegx-ohci", + .owner = THIS_MODULE, + } +}; + +MODULE_ALIAS("platform:tilegx-ohci"); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 2732ef660c5c..7b01094d7993 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -462,6 +462,42 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, } } +/* Updates Link Status for super Speed port */ +static void xhci_hub_report_link_state(u32 *status, u32 status_reg) +{ + u32 pls = status_reg & PORT_PLS_MASK; + + /* resume state is a xHCI internal state. + * Do not report it to usb core. + */ + if (pls == XDEV_RESUME) + return; + + /* When the CAS bit is set then warm reset + * should be performed on port + */ + if (status_reg & PORT_CAS) { + /* The CAS bit can be set while the port is + * in any link state. + * Only roothubs have CAS bit, so we + * pretend to be in compliance mode + * unless we're already in compliance + * or the inactive state. + */ + if (pls != USB_SS_PORT_LS_COMP_MOD && + pls != USB_SS_PORT_LS_SS_INACTIVE) { + pls = USB_SS_PORT_LS_COMP_MOD; + } + /* Return also connection bit - + * hub state machine resets port + * when this bit is set. + */ + pls |= USB_PORT_STAT_CONNECTION; + } + /* update status field */ + *status |= pls; +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -606,13 +642,9 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, else status |= USB_PORT_STAT_POWER; } - /* Port Link State */ + /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { - /* resume state is a xHCI internal state. - * Do not report it to usb core. - */ - if ((temp & PORT_PLS_MASK) != XDEV_RESUME) - status |= (temp & PORT_PLS_MASK); + xhci_hub_report_link_state(&status, temp); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 23b4aefd1036..8275645889da 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, num_trbs_free_temp = ep_ring->num_trbs_free; dequeue_temp = ep_ring->dequeue; + /* If we get two back-to-back stalls, and the first stalled transfer + * ends just before a link TRB, the dequeue pointer will be left on + * the link TRB by the code in the while loop. So we have to update + * the dequeue pointer one segment further, or we'll jump off + * the segment into la-la-land. + */ + if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) { + ep_ring->deq_seg = ep_ring->deq_seg->next; + ep_ring->dequeue = ep_ring->deq_seg->trbs; + } + while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { /* We have more usable TRBs */ ep_ring->num_trbs_free++; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index de3d6e3e57be..55c0785810c9 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -341,7 +341,11 @@ struct xhci_op_regs { #define PORT_PLC (1 << 22) /* port configure error change - port failed to configure its link partner */ #define PORT_CEC (1 << 23) -/* bit 24 reserved */ +/* Cold Attach Status - xHC can set this bit to report device attached during + * Sx state. Warm port reset should be perfomed to clear this bit and move port + * to connected state. + */ +#define PORT_CAS (1 << 24) /* wake on connect (enable) */ #define PORT_WKCONN_E (1 << 25) /* wake on disconnect (enable) */ |