summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c48
1 files changed, 44 insertions, 4 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 8c8da2d657fa..68e6132aa8b2 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -908,6 +908,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
spin_unlock_irqrestore(&xhci->lock, flags);
}
+static bool xhci_pending_portevent(struct xhci_hcd *xhci)
+{
+ struct xhci_port **ports;
+ int port_index;
+ u32 status;
+ u32 portsc;
+
+ status = readl(&xhci->op_regs->status);
+ if (status & STS_EINT)
+ return true;
+ /*
+ * Checking STS_EINT is not enough as there is a lag between a change
+ * bit being set and the Port Status Change Event that it generated
+ * being written to the Event Ring. See note in xhci 1.1 section 4.19.2.
+ */
+
+ port_index = xhci->usb2_rhub.num_ports;
+ ports = xhci->usb2_rhub.ports;
+ while (port_index--) {
+ portsc = readl(ports[port_index]->addr);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ port_index = xhci->usb3_rhub.num_ports;
+ ports = xhci->usb3_rhub.ports;
+ while (port_index--) {
+ portsc = readl(ports[port_index]->addr);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ return false;
+}
+
/*
* Stop HC (not bus-specific)
*
@@ -1009,7 +1044,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend);
*/
int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
{
- u32 command, temp = 0, status;
+ u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
@@ -1043,8 +1078,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
command = readl(&xhci->op_regs->command);
command |= CMD_CRS;
writel(command, &xhci->op_regs->command);
+ /*
+ * Some controllers take up to 55+ ms to complete the controller
+ * restore so setting the timeout to 100ms. Xhci specification
+ * doesn't mention any timeout value.
+ */
if (xhci_handshake(&xhci->op_regs->status,
- STS_RESTORE, 0, 10 * 1000)) {
+ STS_RESTORE, 0, 100 * 1000)) {
xhci_warn(xhci, "WARN: xHC restore state timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
@@ -1134,8 +1174,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
done:
if (retval == 0) {
/* Resume root hubs only when have pending events. */
- status = readl(&xhci->op_regs->status);
- if (status & STS_EINT) {
+ if (xhci_pending_portevent(xhci)) {
usb_hcd_resume_root_hub(xhci->shared_hcd);
usb_hcd_resume_root_hub(hcd);
}
@@ -3012,6 +3051,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
if (!list_empty(&ep->ring->td_list)) {
dev_err(&udev->dev, "EP not empty, refuse reset\n");
spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
goto cleanup;
}
xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0);