diff options
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
| -rw-r--r-- | drivers/usb/host/ehci-hub.c | 33 |
1 files changed, 27 insertions, 6 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2c6571c05f35..19372673bf09 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) del_timer_sync(&ehci->watchdog); del_timer_sync(&ehci->iaa_watchdog); - port = HCS_N_PORTS (ehci->hcs_params); spin_lock_irq (&ehci->lock); + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + if (hcd->self.root_hub->do_remote_wakeup) { + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + if (ehci->reset_done[port] != 0) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because " + "port %d is resuming\n", + port + 1); + return -EBUSY; + } + } + } + /* stop schedules, clean any completed work */ if (HC_IS_RUNNING(hcd->state)) { ehci_quiesce (ehci); @@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) */ ehci->bus_suspended = 0; ehci->owned_ports = 0; + port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; @@ -178,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -886,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); |