14 files changed, 134 insertions, 173 deletions

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7e47e6223089..2d152571a7de 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -265,6 +265,7 @@ config USB_CONFIGFS_NCM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_NCM
+	select CRC32
 	help
 	  NCM is an advanced protocol for Ethernet encapsulation, allows
 	  grouping of several ethernet frames into one USB transfer and
@@ -314,6 +315,7 @@ config USB_CONFIGFS_EEM
 	depends on NET
 	select USB_U_ETHER
 	select USB_F_EEM
+	select CRC32
 	help
 	  CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
 	  and therefore can be supported by more hardware.  Technically ECM and
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c6d455f2bb92..1a556a628971 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -392,8 +392,11 @@ int usb_function_deactivate(struct usb_function *function)
 
 	spin_lock_irqsave(&cdev->lock, flags);
 
-	if (cdev->deactivations == 0)
+	if (cdev->deactivations == 0) {
+		spin_unlock_irqrestore(&cdev->lock, flags);
 		status = usb_gadget_deactivate(cdev->gadget);
+		spin_lock_irqsave(&cdev->lock, flags);
+	}
 	if (status == 0)
 		cdev->deactivations++;
 
@@ -424,8 +427,11 @@ int usb_function_activate(struct usb_function *function)
 		status = -EINVAL;
 	else {
 		cdev->deactivations--;
-		if (cdev->deactivations == 0)
+		if (cdev->deactivations == 0) {
+			spin_unlock_irqrestore(&cdev->lock, flags);
 			status = usb_gadget_activate(cdev->gadget);
+			spin_lock_irqsave(&cdev->lock, flags);
+		}
 	}
 
 	spin_unlock_irqrestore(&cdev->lock, flags);
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 56051bb97349..36ffb43f9c1a 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -221,9 +221,16 @@ static ssize_t gadget_dev_desc_bcdUSB_store(struct config_item *item,
 
 static ssize_t gadget_dev_desc_UDC_show(struct config_item *item, char *page)
 {
-	char *udc_name = to_gadget_info(item)->composite.gadget_driver.udc_name;
+	struct gadget_info *gi = to_gadget_info(item);
+	char *udc_name;
+	int ret;
+
+	mutex_lock(&gi->lock);
+	udc_name = gi->composite.gadget_driver.udc_name;
+	ret = sprintf(page, "%s\n", udc_name ?: "");
+	mutex_unlock(&gi->lock);
 
-	return sprintf(page, "%s\n", udc_name ?: "");
+	return ret;
 }
 
 static int unregister_gadget(struct gadget_info *gi)
@@ -1248,9 +1255,9 @@ static void purge_configs_funcs(struct gadget_info *gi)
 
 		cfg = container_of(c, struct config_usb_cfg, c);
 
-		list_for_each_entry_safe(f, tmp, &c->functions, list) {
+		list_for_each_entry_safe_reverse(f, tmp, &c->functions, list) {
 
-			list_move_tail(&f->list, &cfg->func_list);
+			list_move(&f->list, &cfg->func_list);
 			if (f->unbind) {
 				dev_dbg(&gi->cdev.gadget->dev,
 					"unbind function '%s'/%p\n",
@@ -1536,7 +1543,7 @@ static const struct usb_gadget_driver configfs_driver_template = {
 	.suspend	= configfs_composite_suspend,
 	.resume		= configfs_composite_resume,
 
-	.max_speed	= USB_SPEED_SUPER,
+	.max_speed	= USB_SPEED_SUPER_PLUS,
 	.driver = {
 		.owner          = THIS_MODULE,
 		.name		= "configfs-gadget",
@@ -1576,7 +1583,7 @@ static struct config_group *gadgets_make(
 	gi->composite.unbind = configfs_do_nothing;
 	gi->composite.suspend = NULL;
 	gi->composite.resume = NULL;
-	gi->composite.max_speed = USB_SPEED_SUPER;
+	gi->composite.max_speed = USB_SPEED_SUPER_PLUS;
 
 	spin_lock_init(&gi->spinlock);
 	mutex_init(&gi->lock);
diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c
index 64a4112068fc..2f1eb2e81d30 100644
--- a/drivers/usb/gadget/function/f_printer.c
+++ b/drivers/usb/gadget/function/f_printer.c
@@ -1162,6 +1162,7 @@ fail_tx_reqs:
 		printer_req_free(dev->in_ep, req);
 	}
 
+	usb_free_all_descriptors(f);
 	return ret;
 
 }
diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 3633df6d7610..5d960b6603b6 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -271,7 +271,7 @@ static struct usb_endpoint_descriptor fs_epout_desc = {
 
 	.bEndpointAddress = USB_DIR_OUT,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -280,7 +280,7 @@ static struct usb_endpoint_descriptor hs_epout_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -348,7 +348,7 @@ static struct usb_endpoint_descriptor fs_epin_desc = {
 
 	.bEndpointAddress = USB_DIR_IN,
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1023),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 1,
 };
 
@@ -357,7 +357,7 @@ static struct usb_endpoint_descriptor hs_epin_desc = {
 	.bDescriptorType = USB_DT_ENDPOINT,
 
 	.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
-	.wMaxPacketSize = cpu_to_le16(1024),
+	/* .wMaxPacketSize = DYNAMIC */
 	.bInterval = 4,
 };
 
@@ -444,12 +444,28 @@ struct cntrl_range_lay3 {
 	__le32	dRES;
 } __packed;
 
-static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
+static int set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 	struct usb_endpoint_descriptor *ep_desc,
-	unsigned int factor, bool is_playback)
+	enum usb_device_speed speed, bool is_playback)
 {
 	int chmask, srate, ssize;
-	u16 max_packet_size;
+	u16 max_size_bw, max_size_ep;
+	unsigned int factor;
+
+	switch (speed) {
+	case USB_SPEED_FULL:
+		max_size_ep = 1023;
+		factor = 1000;
+		break;
+
+	case USB_SPEED_HIGH:
+		max_size_ep = 1024;
+		factor = 8000;
+		break;
+
+	default:
+		return -EINVAL;
+	}
 
 	if (is_playback) {
 		chmask = uac2_opts->p_chmask;
@@ -461,10 +477,12 @@ static void set_ep_max_packet_size(const struct f_uac2_opts *uac2_opts,
 		ssize = uac2_opts->c_ssize;
 	}
 
-	max_packet_size = num_channels(chmask) * ssize *
+	max_size_bw = num_channels(chmask) * ssize *
 		DIV_ROUND_UP(srate, factor / (1 << (ep_desc->bInterval - 1)));
-	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_packet_size,
-				le16_to_cpu(ep_desc->wMaxPacketSize)));
+	ep_desc->wMaxPacketSize = cpu_to_le16(min_t(u16, max_size_bw,
+						    max_size_ep));
+
+	return 0;
 }
 
 /* Use macro to overcome line length limitation */
@@ -670,10 +688,33 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	}
 
 	/* Calculate wMaxPacketSize according to audio bandwidth */
-	set_ep_max_packet_size(uac2_opts, &fs_epin_desc, 1000, true);
-	set_ep_max_packet_size(uac2_opts, &fs_epout_desc, 1000, false);
-	set_ep_max_packet_size(uac2_opts, &hs_epin_desc, 8000, true);
-	set_ep_max_packet_size(uac2_opts, &hs_epout_desc, 8000, false);
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epin_desc, USB_SPEED_FULL,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &fs_epout_desc, USB_SPEED_FULL,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epin_desc, USB_SPEED_HIGH,
+				     true);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
+
+	ret = set_ep_max_packet_size(uac2_opts, &hs_epout_desc, USB_SPEED_HIGH,
+				     false);
+	if (ret < 0) {
+		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
+		return ret;
+	}
 
 	if (EPOUT_EN(uac2_opts)) {
 		agdev->out_ep = usb_ep_autoconfig(gadget, &fs_epout_desc);
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 31ea76adcc0d..c019f2b0c0af 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -45,9 +45,10 @@
 #define UETH__VERSION	"29-May-2008"
 
 /* Experiments show that both Linux and Windows hosts allow up to 16k
- * frame sizes. Set the max size to 15k+52 to prevent allocating 32k
+ * frame sizes. Set the max MTU size to 15k+52 to prevent allocating 32k
  * blocks and still have efficient handling. */
-#define GETHER_MAX_ETH_FRAME_LEN 15412
+#define GETHER_MAX_MTU_SIZE 15412
+#define GETHER_MAX_ETH_FRAME_LEN (GETHER_MAX_MTU_SIZE + ETH_HLEN)
 
 struct eth_dev {
 	/* lock is held while accessing port_usb
@@ -786,7 +787,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g,
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	dev->gadget = g;
 	SET_NETDEV_DEV(net, &g->dev);
@@ -848,7 +849,7 @@ struct net_device *gether_setup_name_default(const char *netname)
 
 	/* MTU range: 14 - 15412 */
 	net->min_mtu = ETH_HLEN;
-	net->max_mtu = GETHER_MAX_ETH_FRAME_LEN;
+	net->max_mtu = GETHER_MAX_MTU_SIZE;
 
 	return net;
 }
diff --git a/drivers/usb/gadget/legacy/acm_ms.c b/drivers/usb/gadget/legacy/acm_ms.c
index 59be2d8417c9..e8033e5f0c18 100644
--- a/drivers/usb/gadget/legacy/acm_ms.c
+++ b/drivers/usb/gadget/legacy/acm_ms.c
@@ -200,8 +200,10 @@ static int acm_ms_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail_string_ids;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index 1a12aab208b4..8c614bb86c66 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -90,7 +90,7 @@ config USB_BCM63XX_UDC
 
 config USB_FSL_USB2
 	tristate "Freescale Highspeed USB DR Peripheral Controller"
-	depends on FSL_SOC || ARCH_MXC
+	depends on FSL_SOC
 	help
 	   Some of Freescale PowerPC and i.MX processors have a High Speed
 	   Dual-Role(DR) USB controller, which supports device mode.
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index f5a7ce28aecd..a21f2224e7eb 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -23,7 +23,6 @@ obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_BCM63XX_UDC)	+= bcm63xx_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
 fsl_usb2_udc-y			:= fsl_udc_core.o
-fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_TEGRA_XUDC)	+= tegra-xudc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
index 0bd6b20435b8..02d8bfae58fb 100644
--- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c
+++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c
@@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep,
 	u32 state, reg, loops;
 
 	/* Stop DMA activity */
-	writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	if (ep->epn.desc_mode)
+		writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
+	else
+		writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT);
 
 	/* Wait for it to complete */
 	for (loops = 0; loops < 1000; loops++) {
diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig
index 3e88c7670b2e..fb01ff47b64c 100644
--- a/drivers/usb/gadget/udc/bdc/Kconfig
+++ b/drivers/usb/gadget/udc/bdc/Kconfig
@@ -17,7 +17,7 @@ if USB_BDC_UDC
 comment "Platform Support"
 config	USB_BDC_PCI
 	tristate "BDC support for PCIe based platforms"
-	depends on USB_PCI
+	depends on USB_PCI && BROKEN
 	default USB_BDC_UDC
 	help
 		Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform.
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 5b5cfeb6c14a..ea114f922ccf 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -659,8 +659,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect);
  *
  * Enables the D+ (or potentially D-) pullup.  The host will start
  * enumerating this gadget when the pullup is active and a VBUS session
- * is active (the link is powered).  This pullup is always enabled unless
- * usb_gadget_disconnect() has been used to disable it.
+ * is active (the link is powered).
  *
  * Returns zero on success, else negative errno.
  */
@@ -1530,10 +1529,13 @@ static ssize_t soft_connect_store(struct device *dev,
 		struct device_attribute *attr, const char *buf, size_t n)
 {
 	struct usb_udc		*udc = container_of(dev, struct usb_udc, dev);
+	ssize_t			ret;
 
+	mutex_lock(&udc_lock);
 	if (!udc->driver) {
 		dev_err(dev, "soft-connect without a gadget driver\n");
-		return -EOPNOTSUPP;
+		ret = -EOPNOTSUPP;
+		goto out;
 	}
 
 	if (sysfs_streq(buf, "connect")) {
@@ -1544,10 +1546,14 @@ static ssize_t soft_connect_store(struct device *dev,
 		usb_gadget_udc_stop(udc);
 	} else {
 		dev_err(dev, "unsupported command '%s'\n", buf);
-		return -EINVAL;
+		ret = -EINVAL;
+		goto out;
 	}
 
-	return n;
+	ret = n;
+out:
+	mutex_unlock(&udc_lock);
+	return ret;
 }
 static DEVICE_ATTR_WO(soft_connect);
 
diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c
index ab5e978b5052..57067763b100 100644
--- a/drivers/usb/gadget/udc/dummy_hcd.c
+++ b/drivers/usb/gadget/udc/dummy_hcd.c
@@ -2118,9 +2118,21 @@ static int dummy_hub_control(
 				dum_hcd->port_status &= ~USB_PORT_STAT_POWER;
 			set_link_state(dum_hcd);
 			break;
-		default:
+		case USB_PORT_FEAT_ENABLE:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			fallthrough;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
 			dum_hcd->port_status &= ~(1 << wValue);
 			set_link_state(dum_hcd);
+			break;
+		default:
+		/* Disallow INDICATOR and C_OVER_CURRENT */
+			goto error;
 		}
 		break;
 	case GetHubDescriptor:
@@ -2258,17 +2270,20 @@ static int dummy_hub_control(
 			}
 			fallthrough;
 		case USB_PORT_FEAT_RESET:
+			if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION))
+				break;
 			/* if it's already enabled, disable */
 			if (hcd->speed == HCD_USB3) {
-				dum_hcd->port_status = 0;
 				dum_hcd->port_status =
 					(USB_SS_PORT_STAT_POWER |
 					 USB_PORT_STAT_CONNECTION |
 					 USB_PORT_STAT_RESET);
-			} else
+			} else {
 				dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
 					| USB_PORT_STAT_LOW_SPEED
 					| USB_PORT_STAT_HIGH_SPEED);
+				dum_hcd->port_status |= USB_PORT_STAT_RESET;
+			}
 			/*
 			 * We want to reset device status. All but the
 			 * Self powered feature
@@ -2280,19 +2295,19 @@ static int dummy_hub_control(
 			 * interval? Is it still 50msec as for HS?
 			 */
 			dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
-			fallthrough;
-		default:
-			if (hcd->speed == HCD_USB3) {
-				if ((dum_hcd->port_status &
-				     USB_SS_PORT_STAT_POWER) != 0) {
-					dum_hcd->port_status |= (1 << wValue);
-				}
-			} else
-				if ((dum_hcd->port_status &
-				     USB_PORT_STAT_POWER) != 0) {
-					dum_hcd->port_status |= (1 << wValue);
-				}
 			set_link_state(dum_hcd);
+			break;
+		case USB_PORT_FEAT_C_CONNECTION:
+		case USB_PORT_FEAT_C_RESET:
+		case USB_PORT_FEAT_C_ENABLE:
+		case USB_PORT_FEAT_C_SUSPEND:
+			/* Not allowed for USB-3, and ignored for USB-2 */
+			if (hcd->speed == HCD_USB3)
+				goto error;
+			break;
+		default:
+		/* Disallow TEST, INDICATOR, and C_OVER_CURRENT */
+			goto error;
 		}
 		break;
 	case GetPortErrorCount:
diff --git a/drivers/usb/gadget/udc/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c
deleted file mode 100644
index 5a321992decc..000000000000
--- a/drivers/usb/gadget/udc/fsl_mxc_udc.c
+++ /dev/null
@@ -1,122 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2009
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * Description:
- * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c
- * driver to function correctly on these systems.
- */
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/fsl_devices.h>
-#include <linux/mod_devicetable.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "fsl_usb2_udc.h"
-
-static struct clk *mxc_ahb_clk;
-static struct clk *mxc_per_clk;
-static struct clk *mxc_ipg_clk;
-
-/* workaround ENGcm09152 for i.MX35 */
-#define MX35_USBPHYCTRL_OFFSET		0x600
-#define USBPHYCTRL_OTGBASE_OFFSET	0x8
-#define USBPHYCTRL_EVDO			(1 << 23)
-
-int fsl_udc_clk_init(struct platform_device *pdev)
-{
-	struct fsl_usb2_platform_data *pdata;
-	unsigned long freq;
-	int ret;
-
-	pdata = dev_get_platdata(&pdev->dev);
-
-	mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg");
-	if (IS_ERR(mxc_ipg_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n");
-		return PTR_ERR(mxc_ipg_clk);
-	}
-
-	mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb");
-	if (IS_ERR(mxc_ahb_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n");
-		return PTR_ERR(mxc_ahb_clk);
-	}
-
-	mxc_per_clk = devm_clk_get(&pdev->dev, "per");
-	if (IS_ERR(mxc_per_clk)) {
-		dev_err(&pdev->dev, "clk_get(\"per\") failed\n");
-		return PTR_ERR(mxc_per_clk);
-	}
-
-	clk_prepare_enable(mxc_ipg_clk);
-	clk_prepare_enable(mxc_ahb_clk);
-	clk_prepare_enable(mxc_per_clk);
-
-	/* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */
-	if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) {
-		freq = clk_get_rate(mxc_per_clk);
-		if (pdata->phy_mode != FSL_USB2_PHY_ULPI &&
-		    (freq < 59999000 || freq > 60001000)) {
-			dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq);
-			ret = -EINVAL;
-			goto eclkrate;
-		}
-	}
-
-	return 0;
-
-eclkrate:
-	clk_disable_unprepare(mxc_ipg_clk);
-	clk_disable_unprepare(mxc_ahb_clk);
-	clk_disable_unprepare(mxc_per_clk);
-	mxc_per_clk = NULL;
-	return ret;
-}
-
-int fsl_udc_clk_finalize(struct platform_device *pdev)
-{
-	struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	int ret = 0;
-
-	/* workaround ENGcm09152 for i.MX35 */
-	if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) {
-		unsigned int v;
-		struct resource *res = platform_get_resource
-			(pdev, IORESOURCE_MEM, 0);
-		void __iomem *phy_regs = ioremap(res->start +
-						MX35_USBPHYCTRL_OFFSET, 512);
-		if (!phy_regs) {
-			dev_err(&pdev->dev, "ioremap for phy address fails\n");
-			ret = -EINVAL;
-			goto ioremap_err;
-		}
-
-		v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
-		writel(v | USBPHYCTRL_EVDO,
-			phy_regs + USBPHYCTRL_OTGBASE_OFFSET);
-
-		iounmap(phy_regs);
-	}
-
-
-ioremap_err:
-	/* ULPI transceivers don't need usbpll */
-	if (pdata->phy_mode == FSL_USB2_PHY_ULPI) {
-		clk_disable_unprepare(mxc_per_clk);
-		mxc_per_clk = NULL;
-	}
-
-	return ret;
-}
-
-void fsl_udc_clk_release(void)
-{
-	if (mxc_per_clk)
-		clk_disable_unprepare(mxc_per_clk);
-	clk_disable_unprepare(mxc_ahb_clk);
-	clk_disable_unprepare(mxc_ipg_clk);
-}