diff options
Diffstat (limited to 'drivers/usb/gadget/file_storage.c')
-rw-r--r-- | drivers/usb/gadget/file_storage.c | 879 |
1 files changed, 110 insertions, 769 deletions
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 1e6aa504d58a..fca3407e48f2 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -248,8 +248,6 @@ #include <linux/freezer.h> #include <linux/utsname.h> -#include <asm/unaligned.h> - #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -274,21 +272,20 @@ #define DRIVER_NAME "g_file_storage" #define DRIVER_VERSION "20 November 2008" -static const char longname[] = DRIVER_DESC; -static const char shortname[] = DRIVER_NAME; +static char fsg_string_manufacturer[64]; +static const char fsg_string_product[] = DRIVER_DESC; +static char fsg_string_serial[13]; +static const char fsg_string_config[] = "Self-powered"; +static const char fsg_string_interface[] = "Mass Storage"; + + +#include "storage_common.c" + MODULE_DESCRIPTION(DRIVER_DESC); MODULE_AUTHOR("Alan Stern"); MODULE_LICENSE("Dual BSD/GPL"); -/* Thanks to NetChip Technologies for donating this product ID. - * - * DO NOT REUSE THESE IDs with any other driver!! Ever!! - * Instead: allocate your own, using normal USB-IF procedures. */ -#define DRIVER_VENDOR_ID 0x0525 // NetChip -#define DRIVER_PRODUCT_ID 0xa4a5 // Linux-USB File-backed Storage Gadget - - /* * This driver assumes self-powered hardware and has no way for users to * trigger remote wakeup. It uses autoconfiguration to select endpoints @@ -298,54 +295,12 @@ MODULE_LICENSE("Dual BSD/GPL"); /*-------------------------------------------------------------------------*/ -#define LDBG(lun,fmt,args...) \ - dev_dbg(&(lun)->dev , fmt , ## args) -#define MDBG(fmt,args...) \ - pr_debug(DRIVER_NAME ": " fmt , ## args) - -#ifndef DEBUG -#undef VERBOSE_DEBUG -#undef DUMP_MSGS -#endif /* !DEBUG */ - -#ifdef VERBOSE_DEBUG -#define VLDBG LDBG -#else -#define VLDBG(lun,fmt,args...) \ - do { } while (0) -#endif /* VERBOSE_DEBUG */ - -#define LERROR(lun,fmt,args...) \ - dev_err(&(lun)->dev , fmt , ## args) -#define LWARN(lun,fmt,args...) \ - dev_warn(&(lun)->dev , fmt , ## args) -#define LINFO(lun,fmt,args...) \ - dev_info(&(lun)->dev , fmt , ## args) - -#define MINFO(fmt,args...) \ - pr_info(DRIVER_NAME ": " fmt , ## args) - -#define DBG(d, fmt, args...) \ - dev_dbg(&(d)->gadget->dev , fmt , ## args) -#define VDBG(d, fmt, args...) \ - dev_vdbg(&(d)->gadget->dev , fmt , ## args) -#define ERROR(d, fmt, args...) \ - dev_err(&(d)->gadget->dev , fmt , ## args) -#define WARNING(d, fmt, args...) \ - dev_warn(&(d)->gadget->dev , fmt , ## args) -#define INFO(d, fmt, args...) \ - dev_info(&(d)->gadget->dev , fmt , ## args) - - -/*-------------------------------------------------------------------------*/ /* Encapsulate the module parameter settings */ -#define MAX_LUNS 8 - static struct { - char *file[MAX_LUNS]; - int ro[MAX_LUNS]; + char *file[FSG_MAX_LUNS]; + int ro[FSG_MAX_LUNS]; unsigned int num_filenames; unsigned int num_ros; unsigned int nluns; @@ -372,8 +327,8 @@ static struct { .removable = 0, .can_stall = 1, .cdrom = 0, - .vendor = DRIVER_VENDOR_ID, - .product = DRIVER_PRODUCT_ID, + .vendor = FSG_VENDOR_ID, + .product = FSG_PRODUCT_ID, .release = 0xffff, // Use controller chip type .buflen = 16384, }; @@ -425,125 +380,6 @@ MODULE_PARM_DESC(buflen, "I/O buffer size"); #endif /* CONFIG_USB_FILE_STORAGE_TEST */ -/*-------------------------------------------------------------------------*/ - -/* SCSI device types */ -#define TYPE_DISK 0x00 -#define TYPE_CDROM 0x05 - -/* USB protocol value = the transport method */ -#define USB_PR_CBI 0x00 // Control/Bulk/Interrupt -#define USB_PR_CB 0x01 // Control/Bulk w/o interrupt -#define USB_PR_BULK 0x50 // Bulk-only - -/* USB subclass value = the protocol encapsulation */ -#define USB_SC_RBC 0x01 // Reduced Block Commands (flash) -#define USB_SC_8020 0x02 // SFF-8020i, MMC-2, ATAPI (CD-ROM) -#define USB_SC_QIC 0x03 // QIC-157 (tape) -#define USB_SC_UFI 0x04 // UFI (floppy) -#define USB_SC_8070 0x05 // SFF-8070i (removable) -#define USB_SC_SCSI 0x06 // Transparent SCSI - -/* Bulk-only data structures */ - -/* Command Block Wrapper */ -struct bulk_cb_wrap { - __le32 Signature; // Contains 'USBC' - u32 Tag; // Unique per command id - __le32 DataTransferLength; // Size of the data - u8 Flags; // Direction in bit 7 - u8 Lun; // LUN (normally 0) - u8 Length; // Of the CDB, <= MAX_COMMAND_SIZE - u8 CDB[16]; // Command Data Block -}; - -#define USB_BULK_CB_WRAP_LEN 31 -#define USB_BULK_CB_SIG 0x43425355 // Spells out USBC -#define USB_BULK_IN_FLAG 0x80 - -/* Command Status Wrapper */ -struct bulk_cs_wrap { - __le32 Signature; // Should = 'USBS' - u32 Tag; // Same as original command - __le32 Residue; // Amount not transferred - u8 Status; // See below -}; - -#define USB_BULK_CS_WRAP_LEN 13 -#define USB_BULK_CS_SIG 0x53425355 // Spells out 'USBS' -#define USB_STATUS_PASS 0 -#define USB_STATUS_FAIL 1 -#define USB_STATUS_PHASE_ERROR 2 - -/* Bulk-only class specific requests */ -#define USB_BULK_RESET_REQUEST 0xff -#define USB_BULK_GET_MAX_LUN_REQUEST 0xfe - - -/* CBI Interrupt data structure */ -struct interrupt_data { - u8 bType; - u8 bValue; -}; - -#define CBI_INTERRUPT_DATA_LEN 2 - -/* CBI Accept Device-Specific Command request */ -#define USB_CBI_ADSC_REQUEST 0x00 - - -#define MAX_COMMAND_SIZE 16 // Length of a SCSI Command Data Block - -/* SCSI commands that we recognize */ -#define SC_FORMAT_UNIT 0x04 -#define SC_INQUIRY 0x12 -#define SC_MODE_SELECT_6 0x15 -#define SC_MODE_SELECT_10 0x55 -#define SC_MODE_SENSE_6 0x1a -#define SC_MODE_SENSE_10 0x5a -#define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e -#define SC_READ_6 0x08 -#define SC_READ_10 0x28 -#define SC_READ_12 0xa8 -#define SC_READ_CAPACITY 0x25 -#define SC_READ_FORMAT_CAPACITIES 0x23 -#define SC_READ_HEADER 0x44 -#define SC_READ_TOC 0x43 -#define SC_RELEASE 0x17 -#define SC_REQUEST_SENSE 0x03 -#define SC_RESERVE 0x16 -#define SC_SEND_DIAGNOSTIC 0x1d -#define SC_START_STOP_UNIT 0x1b -#define SC_SYNCHRONIZE_CACHE 0x35 -#define SC_TEST_UNIT_READY 0x00 -#define SC_VERIFY 0x2f -#define SC_WRITE_6 0x0a -#define SC_WRITE_10 0x2a -#define SC_WRITE_12 0xaa - -/* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ -#define SS_NO_SENSE 0 -#define SS_COMMUNICATION_FAILURE 0x040800 -#define SS_INVALID_COMMAND 0x052000 -#define SS_INVALID_FIELD_IN_CDB 0x052400 -#define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 -#define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 -#define SS_MEDIUM_NOT_PRESENT 0x023a00 -#define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 -#define SS_NOT_READY_TO_READY_TRANSITION 0x062800 -#define SS_RESET_OCCURRED 0x062900 -#define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 -#define SS_UNRECOVERED_READ_ERROR 0x031100 -#define SS_WRITE_ERROR 0x030c02 -#define SS_WRITE_PROTECTED 0x072700 - -#define SK(x) ((u8) ((x) >> 16)) // Sense Key byte, etc. -#define ASC(x) ((u8) ((x) >> 8)) -#define ASCQ(x) ((u8) (x)) - - -/*-------------------------------------------------------------------------*/ - /* * These definitions will permit the compiler to avoid generating code for * parts of the driver that aren't used in the non-TEST version. Even gcc @@ -566,81 +402,8 @@ struct interrupt_data { #endif /* CONFIG_USB_FILE_STORAGE_TEST */ -struct lun { - struct file *filp; - loff_t file_length; - loff_t num_sectors; - - unsigned int ro : 1; - unsigned int prevent_medium_removal : 1; - unsigned int registered : 1; - unsigned int info_valid : 1; - - u32 sense_data; - u32 sense_data_info; - u32 unit_attention_data; - - struct device dev; -}; - -#define backing_file_is_open(curlun) ((curlun)->filp != NULL) - -static struct lun *dev_to_lun(struct device *dev) -{ - return container_of(dev, struct lun, dev); -} - - -/* Big enough to hold our biggest descriptor */ -#define EP0_BUFSIZE 256 -#define DELAYED_STATUS (EP0_BUFSIZE + 999) // An impossibly large value - -/* Number of buffers we will use. 2 is enough for double-buffering */ -#define NUM_BUFFERS 2 - -enum fsg_buffer_state { - BUF_STATE_EMPTY = 0, - BUF_STATE_FULL, - BUF_STATE_BUSY -}; - -struct fsg_buffhd { - void *buf; - enum fsg_buffer_state state; - struct fsg_buffhd *next; - - /* The NetChip 2280 is faster, and handles some protocol faults - * better, if we don't submit any short bulk-out read requests. - * So we will record the intended request length here. */ - unsigned int bulk_out_intended_length; - - struct usb_request *inreq; - int inreq_busy; - struct usb_request *outreq; - int outreq_busy; -}; - -enum fsg_state { - FSG_STATE_COMMAND_PHASE = -10, // This one isn't used anywhere - FSG_STATE_DATA_PHASE, - FSG_STATE_STATUS_PHASE, - - FSG_STATE_IDLE = 0, - FSG_STATE_ABORT_BULK_OUT, - FSG_STATE_RESET, - FSG_STATE_INTERFACE_CHANGE, - FSG_STATE_CONFIG_CHANGE, - FSG_STATE_DISCONNECT, - FSG_STATE_EXIT, - FSG_STATE_TERMINATED -}; +/*-------------------------------------------------------------------------*/ -enum data_direction { - DATA_DIR_UNKNOWN = 0, - DATA_DIR_FROM_HOST, - DATA_DIR_TO_HOST, - DATA_DIR_NONE -}; struct fsg_dev { /* lock protects: state, all the req_busy's, and cbbuf_cmnd */ @@ -662,7 +425,7 @@ struct fsg_dev { int intreq_busy; struct fsg_buffhd *intr_buffhd; - unsigned int bulk_out_maxpacket; + unsigned int bulk_out_maxpacket; enum fsg_state state; // For exception handling unsigned int exception_req_tag; @@ -687,7 +450,7 @@ struct fsg_dev { struct fsg_buffhd *next_buffhd_to_fill; struct fsg_buffhd *next_buffhd_to_drain; - struct fsg_buffhd buffhds[NUM_BUFFERS]; + struct fsg_buffhd buffhds[FSG_NUM_BUFFERS]; int thread_wakeup_needed; struct completion thread_notifier; @@ -712,8 +475,8 @@ struct fsg_dev { u8 cbbuf_cmnd[MAX_COMMAND_SIZE]; unsigned int nluns; - struct lun *luns; - struct lun *curlun; + struct fsg_lun *luns; + struct fsg_lun *curlun; }; typedef void (*fsg_routine_t)(struct fsg_dev *); @@ -739,49 +502,9 @@ static void set_bulk_out_req_length(struct fsg_dev *fsg, static struct fsg_dev *the_fsg; static struct usb_gadget_driver fsg_driver; -static void close_backing_file(struct lun *curlun); - /*-------------------------------------------------------------------------*/ -#ifdef DUMP_MSGS - -static void dump_msg(struct fsg_dev *fsg, const char *label, - const u8 *buf, unsigned int length) -{ - if (length < 512) { - DBG(fsg, "%s, length %u:\n", label, length); - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, - 16, 1, buf, length, 0); - } -} - -static void dump_cdb(struct fsg_dev *fsg) -{} - -#else - -static void dump_msg(struct fsg_dev *fsg, const char *label, - const u8 *buf, unsigned int length) -{} - -#ifdef VERBOSE_DEBUG - -static void dump_cdb(struct fsg_dev *fsg) -{ - print_hex_dump(KERN_DEBUG, "SCSI CDB: ", DUMP_PREFIX_NONE, - 16, 1, fsg->cmnd, fsg->cmnd_size, 0); -} - -#else - -static void dump_cdb(struct fsg_dev *fsg) -{} - -#endif /* VERBOSE_DEBUG */ -#endif /* DUMP_MSGS */ - - static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) { const char *name; @@ -799,26 +522,11 @@ static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep) /*-------------------------------------------------------------------------*/ -/* Routines for unaligned data access */ - -static u32 get_unaligned_be24(u8 *buf) -{ - return 0xffffff & (u32) get_unaligned_be32(buf - 1); -} - - -/*-------------------------------------------------------------------------*/ - /* * DESCRIPTORS ... most are static, but strings and (full) configuration * descriptors are built on demand. Also the (static) config and interface * descriptors are adjusted during fsg_bind(). */ -#define STRING_MANUFACTURER 1 -#define STRING_PRODUCT 2 -#define STRING_SERIAL 3 -#define STRING_CONFIG 4 -#define STRING_INTERFACE 5 /* There is only one configuration. */ #define CONFIG_VALUE 1 @@ -832,13 +540,13 @@ device_desc = { .bDeviceClass = USB_CLASS_PER_INTERFACE, /* The next three values can be overridden by module parameters */ - .idVendor = cpu_to_le16(DRIVER_VENDOR_ID), - .idProduct = cpu_to_le16(DRIVER_PRODUCT_ID), + .idVendor = cpu_to_le16(FSG_VENDOR_ID), + .idProduct = cpu_to_le16(FSG_PRODUCT_ID), .bcdDevice = cpu_to_le16(0xffff), - .iManufacturer = STRING_MANUFACTURER, - .iProduct = STRING_PRODUCT, - .iSerialNumber = STRING_SERIAL, + .iManufacturer = FSG_STRING_MANUFACTURER, + .iProduct = FSG_STRING_PRODUCT, + .iSerialNumber = FSG_STRING_SERIAL, .bNumConfigurations = 1, }; @@ -850,86 +558,12 @@ config_desc = { /* wTotalLength computed by usb_gadget_config_buf() */ .bNumInterfaces = 1, .bConfigurationValue = CONFIG_VALUE, - .iConfiguration = STRING_CONFIG, + .iConfiguration = FSG_STRING_CONFIG, .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER, .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2, }; -static struct usb_otg_descriptor -otg_desc = { - .bLength = sizeof(otg_desc), - .bDescriptorType = USB_DT_OTG, - - .bmAttributes = USB_OTG_SRP, -}; - -/* There is only one interface. */ -static struct usb_interface_descriptor -intf_desc = { - .bLength = sizeof intf_desc, - .bDescriptorType = USB_DT_INTERFACE, - - .bNumEndpoints = 2, // Adjusted during fsg_bind() - .bInterfaceClass = USB_CLASS_MASS_STORAGE, - .bInterfaceSubClass = USB_SC_SCSI, // Adjusted during fsg_bind() - .bInterfaceProtocol = USB_PR_BULK, // Adjusted during fsg_bind() - .iInterface = STRING_INTERFACE, -}; - -/* Three full-speed endpoint descriptors: bulk-in, bulk-out, - * and interrupt-in. */ - -static struct usb_endpoint_descriptor -fs_bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - /* wMaxPacketSize set by autoconfiguration */ -}; - -static struct usb_endpoint_descriptor -fs_bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_OUT, - .bmAttributes = USB_ENDPOINT_XFER_BULK, - /* wMaxPacketSize set by autoconfiguration */ -}; - -static struct usb_endpoint_descriptor -fs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - .bEndpointAddress = USB_DIR_IN, - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 32, // frames -> 32 ms -}; - -static const struct usb_descriptor_header *fs_function[] = { - (struct usb_descriptor_header *) &otg_desc, - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &fs_bulk_in_desc, - (struct usb_descriptor_header *) &fs_bulk_out_desc, - (struct usb_descriptor_header *) &fs_intr_in_desc, - NULL, -}; -#define FS_FUNCTION_PRE_EP_ENTRIES 2 - - -/* - * USB 2.0 devices need to expose both high speed and full speed - * descriptors, unless they only run at full speed. - * - * That means alternate endpoint descriptors (bigger packets) - * and a "device qualifier" ... plus more construction options - * for the config descriptor. - */ static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, @@ -941,78 +575,6 @@ dev_qualifier = { .bNumConfigurations = 1, }; -static struct usb_endpoint_descriptor -hs_bulk_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), -}; - -static struct usb_endpoint_descriptor -hs_bulk_out_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = cpu_to_le16(512), - .bInterval = 1, // NAK every 1 uframe -}; - -static struct usb_endpoint_descriptor -hs_intr_in_desc = { - .bLength = USB_DT_ENDPOINT_SIZE, - .bDescriptorType = USB_DT_ENDPOINT, - - /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ - .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = cpu_to_le16(2), - .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms -}; - -static const struct usb_descriptor_header *hs_function[] = { - (struct usb_descriptor_header *) &otg_desc, - (struct usb_descriptor_header *) &intf_desc, - (struct usb_descriptor_header *) &hs_bulk_in_desc, - (struct usb_descriptor_header *) &hs_bulk_out_desc, - (struct usb_descriptor_header *) &hs_intr_in_desc, - NULL, -}; -#define HS_FUNCTION_PRE_EP_ENTRIES 2 - -/* Maxpacket and other transfer characteristics vary by speed. */ -static struct usb_endpoint_descriptor * -ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, - struct usb_endpoint_descriptor *hs) -{ - if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH) - return hs; - return fs; -} - - -/* The CBI specification limits the serial string to 12 uppercase hexadecimal - * characters. */ -static char manufacturer[64]; -static char serial[13]; - -/* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ -static struct usb_string strings[] = { - {STRING_MANUFACTURER, manufacturer}, - {STRING_PRODUCT, longname}, - {STRING_SERIAL, serial}, - {STRING_CONFIG, "Self-powered"}, - {STRING_INTERFACE, "Mass Storage"}, - {} -}; - -static struct usb_gadget_strings stringtab = { - .language = 0x0409, // en-us - .strings = strings, -}; /* @@ -1032,10 +594,9 @@ static int populate_config_buf(struct usb_gadget *gadget, if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG) speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed; - if (gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH) - function = hs_function; - else - function = fs_function; + function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH + ? (const struct usb_descriptor_header **)fsg_hs_function + : (const struct usb_descriptor_header **)fsg_fs_function; /* for now, don't advertise srp-only devices */ if (!gadget_is_otg(gadget)) @@ -1386,7 +947,7 @@ get_config: VDBG(fsg, "get string descriptor\n"); /* wIndex == language code */ - value = usb_gadget_get_string(&stringtab, + value = usb_gadget_get_string(&fsg_stringtab, w_value & 0xff, req->buf); break; } @@ -1551,7 +1112,7 @@ static int sleep_thread(struct fsg_dev *fsg) static int do_read(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u32 lba; struct fsg_buffhd *bh; int rc; @@ -1677,7 +1238,7 @@ static int do_read(struct fsg_dev *fsg) static int do_write(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u32 lba; struct fsg_buffhd *bh; int get_some_more; @@ -1864,33 +1425,14 @@ static int do_write(struct fsg_dev *fsg) /*-------------------------------------------------------------------------*/ -/* Sync the file data, don't bother with the metadata. - * This code was copied from fs/buffer.c:sys_fdatasync(). */ -static int fsync_sub(struct lun *curlun) -{ - struct file *filp = curlun->filp; - - if (curlun->ro || !filp) - return 0; - return vfs_fsync(filp, filp->f_path.dentry, 1); -} - -static void fsync_all(struct fsg_dev *fsg) -{ - int i; - - for (i = 0; i < fsg->nluns; ++i) - fsync_sub(&fsg->luns[i]); -} - static int do_synchronize_cache(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int rc; /* We ignore the requested LBA and write out all file's * dirty data buffers. */ - rc = fsync_sub(curlun); + rc = fsg_lun_fsync_sub(curlun); if (rc) curlun->sense_data = SS_WRITE_ERROR; return 0; @@ -1899,7 +1441,7 @@ static int do_synchronize_cache(struct fsg_dev *fsg) /*-------------------------------------------------------------------------*/ -static void invalidate_sub(struct lun *curlun) +static void invalidate_sub(struct fsg_lun *curlun) { struct file *filp = curlun->filp; struct inode *inode = filp->f_path.dentry->d_inode; @@ -1911,7 +1453,7 @@ static void invalidate_sub(struct lun *curlun) static int do_verify(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u32 lba; u32 verification_length; struct fsg_buffhd *bh = fsg->next_buffhd_to_fill; @@ -1944,7 +1486,7 @@ static int do_verify(struct fsg_dev *fsg) file_offset = ((loff_t) lba) << 9; /* Write out all the dirty buffers before invalidating them */ - fsync_sub(curlun); + fsg_lun_fsync_sub(curlun); if (signal_pending(current)) return -EINTR; @@ -2041,7 +1583,7 @@ static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh) static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u8 *buf = (u8 *) bh->buf; u32 sd, sdinfo; int valid; @@ -2095,7 +1637,7 @@ static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u32 lba = get_unaligned_be32(&fsg->cmnd[2]); int pmi = fsg->cmnd[8]; u8 *buf = (u8 *) bh->buf; @@ -2113,27 +1655,9 @@ static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh) } -static void store_cdrom_address(u8 *dest, int msf, u32 addr) -{ - if (msf) { - /* Convert to Minutes-Seconds-Frames */ - addr >>= 2; /* Convert to 2048-byte frames */ - addr += 2*75; /* Lead-in occupies 2 seconds */ - dest[3] = addr % 75; /* Frames */ - addr /= 75; - dest[2] = addr % 60; /* Seconds */ - addr /= 60; - dest[1] = addr; /* Minutes */ - dest[0] = 0; /* Reserved */ - } else { - /* Absolute sector */ - put_unaligned_be32(addr, dest); - } -} - static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int msf = fsg->cmnd[1] & 0x02; u32 lba = get_unaligned_be32(&fsg->cmnd[2]); u8 *buf = (u8 *) bh->buf; @@ -2156,7 +1680,7 @@ static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh) static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int msf = fsg->cmnd[1] & 0x02; int start_track = fsg->cmnd[6]; u8 *buf = (u8 *) bh->buf; @@ -2184,7 +1708,7 @@ static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh) static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int mscmnd = fsg->cmnd[0]; u8 *buf = (u8 *) bh->buf; u8 *buf0 = buf; @@ -2265,7 +1789,7 @@ static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh) static int do_start_stop(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int loej, start; if (!mod_data.removable) { @@ -2295,7 +1819,7 @@ static int do_start_stop(struct fsg_dev *fsg) if (loej) { // Simulate an unload/eject up_read(&fsg->filesem); down_write(&fsg->filesem); - close_backing_file(curlun); + fsg_lun_close(curlun); up_write(&fsg->filesem); down_read(&fsg->filesem); } @@ -2303,7 +1827,7 @@ static int do_start_stop(struct fsg_dev *fsg) /* Our emulation doesn't support mounting; the medium is * available for use as soon as it is loaded. */ - if (!backing_file_is_open(curlun)) { + if (!fsg_lun_is_open(curlun)) { curlun->sense_data = SS_MEDIUM_NOT_PRESENT; return -EINVAL; } @@ -2315,7 +1839,7 @@ static int do_start_stop(struct fsg_dev *fsg) static int do_prevent_allow(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; int prevent; if (!mod_data.removable) { @@ -2330,7 +1854,7 @@ static int do_prevent_allow(struct fsg_dev *fsg) } if (curlun->prevent_medium_removal && !prevent) - fsync_sub(curlun); + fsg_lun_fsync_sub(curlun); curlun->prevent_medium_removal = prevent; return 0; } @@ -2339,7 +1863,7 @@ static int do_prevent_allow(struct fsg_dev *fsg) static int do_read_format_capacities(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; u8 *buf = (u8 *) bh->buf; buf[0] = buf[1] = buf[2] = 0; @@ -2356,7 +1880,7 @@ static int do_read_format_capacities(struct fsg_dev *fsg, static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; /* We don't support MODE SELECT */ curlun->sense_data = SS_INVALID_COMMAND; @@ -2599,7 +2123,7 @@ static int finish_reply(struct fsg_dev *fsg) static int send_status(struct fsg_dev *fsg) { - struct lun *curlun = fsg->curlun; + struct fsg_lun *curlun = fsg->curlun; struct fsg_buffhd *bh; int rc; u8 status = USB_STATUS_PASS; @@ -2691,7 +2215,7 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size, int lun = fsg->cmnd[1] >> 5; static const char dirletter[4] = {'u', 'o', 'i', 'n'}; char hdlen[20]; - struct lun *curlun; + struct fsg_lun *curlun; /* Adjust the expected cmnd_size for protocol encapsulation padding. * Transparent SCSI doesn't pad. */ @@ -2820,7 +2344,7 @@ static int check_command(struct fsg_dev *fsg, int cmnd_size, /* If the medium isn't mounted and the command needs to access * it, return an error. */ - if (curlun && !backing_file_is_open(curlun) && needs_medium) { + if (curlun && !fsg_lun_is_open(curlun) && needs_medium) { curlun->sense_data = SS_MEDIUM_NOT_PRESENT; return -EINVAL; } @@ -3075,8 +2599,8 @@ static int do_scsi_command(struct fsg_dev *fsg) static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) { - struct usb_request *req = bh->outreq; - struct bulk_cb_wrap *cbw = req->buf; + struct usb_request *req = bh->outreq; + struct fsg_bulk_cb_wrap *cbw = req->buf; /* Was this a real packet? Should it be ignored? */ if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags)) @@ -3105,7 +2629,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) } /* Is the CBW meaningful? */ - if (cbw->Lun >= MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || + if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~USB_BULK_IN_FLAG || cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) { DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, " "cmdlen %u\n", @@ -3238,7 +2762,7 @@ static int do_set_interface(struct fsg_dev *fsg, int altsetting) reset: /* Deallocate the requests */ - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if (bh->inreq) { @@ -3276,12 +2800,14 @@ reset: DBG(fsg, "set interface %d\n", altsetting); /* Enable the endpoints */ - d = ep_desc(fsg->gadget, &fs_bulk_in_desc, &hs_bulk_in_desc); + d = fsg_ep_desc(fsg->gadget, + &fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0) goto reset; fsg->bulk_in_enabled = 1; - d = ep_desc(fsg->gadget, &fs_bulk_out_desc, &hs_bulk_out_desc); + d = fsg_ep_desc(fsg->gadget, + &fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc); if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0) goto reset; fsg->bulk_out_enabled = 1; @@ -3289,14 +2815,15 @@ reset: clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags); if (transport_is_cbi()) { - d = ep_desc(fsg->gadget, &fs_intr_in_desc, &hs_intr_in_desc); + d = fsg_ep_desc(fsg->gadget, + &fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc); if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0) goto reset; fsg->intr_in_enabled = 1; } /* Allocate the requests */ - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0) @@ -3372,7 +2899,7 @@ static void handle_exception(struct fsg_dev *fsg) struct fsg_buffhd *bh; enum fsg_state old_state; u8 new_config; - struct lun *curlun; + struct fsg_lun *curlun; unsigned int exception_req_tag; int rc; @@ -3392,7 +2919,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Cancel all the pending transfers */ if (fsg->intreq_busy) usb_ep_dequeue(fsg->intr_in, fsg->intreq); - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { bh = &fsg->buffhds[i]; if (bh->inreq_busy) usb_ep_dequeue(fsg->bulk_in, bh->inreq); @@ -3403,7 +2930,7 @@ static void handle_exception(struct fsg_dev *fsg) /* Wait until everything is idle */ for (;;) { num_active = fsg->intreq_busy; - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { bh = &fsg->buffhds[i]; num_active += bh->inreq_busy + bh->outreq_busy; } @@ -3425,7 +2952,7 @@ static void handle_exception(struct fsg_dev *fsg) * state, and the exception. Then invoke the handler. */ spin_lock_irq(&fsg->lock); - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { bh = &fsg->buffhds[i]; bh->state = BUF_STATE_EMPTY; } @@ -3506,7 +3033,8 @@ static void handle_exception(struct fsg_dev *fsg) break; case FSG_STATE_DISCONNECT: - fsync_all(fsg); + for (i = 0; i < fsg->nluns; ++i) + fsg_lun_fsync_sub(fsg->luns + i); do_set_config(fsg, 0); // Unconfigured state break; @@ -3595,201 +3123,10 @@ static int fsg_main_thread(void *fsg_) /*-------------------------------------------------------------------------*/ -/* If the next two routines are called while the gadget is registered, - * the caller must own fsg->filesem for writing. */ - -static int open_backing_file(struct lun *curlun, const char *filename) -{ - int ro; - struct file *filp = NULL; - int rc = -EINVAL; - struct inode *inode = NULL; - loff_t size; - loff_t num_sectors; - loff_t min_sectors; - - /* R/W if we can, R/O if we must */ - ro = curlun->ro; - if (!ro) { - filp = filp_open(filename, O_RDWR | O_LARGEFILE, 0); - if (-EROFS == PTR_ERR(filp)) - ro = 1; - } - if (ro) - filp = filp_open(filename, O_RDONLY | O_LARGEFILE, 0); - if (IS_ERR(filp)) { - LINFO(curlun, "unable to open backing file: %s\n", filename); - return PTR_ERR(filp); - } - - if (!(filp->f_mode & FMODE_WRITE)) - ro = 1; - - if (filp->f_path.dentry) - inode = filp->f_path.dentry->d_inode; - if (inode && S_ISBLK(inode->i_mode)) { - if (bdev_read_only(inode->i_bdev)) - ro = 1; - } else if (!inode || !S_ISREG(inode->i_mode)) { - LINFO(curlun, "invalid file type: %s\n", filename); - goto out; - } - - /* If we can't read the file, it's no good. - * If we can't write the file, use it read-only. */ - if (!filp->f_op || !(filp->f_op->read || filp->f_op->aio_read)) { - LINFO(curlun, "file not readable: %s\n", filename); - goto out; - } - if (!(filp->f_op->write || filp->f_op->aio_write)) - ro = 1; - - size = i_size_read(inode->i_mapping->host); - if (size < 0) { - LINFO(curlun, "unable to find file size: %s\n", filename); - rc = (int) size; - goto out; - } - num_sectors = size >> 9; // File size in 512-byte blocks - min_sectors = 1; - if (mod_data.cdrom) { - num_sectors &= ~3; // Reduce to a multiple of 2048 - min_sectors = 300*4; // Smallest track is 300 frames - if (num_sectors >= 256*60*75*4) { - num_sectors = (256*60*75 - 1) * 4; - LINFO(curlun, "file too big: %s\n", filename); - LINFO(curlun, "using only first %d blocks\n", - (int) num_sectors); - } - } - if (num_sectors < min_sectors) { - LINFO(curlun, "file too small: %s\n", filename); - rc = -ETOOSMALL; - goto out; - } - - get_file(filp); - curlun->ro = ro; - curlun->filp = filp; - curlun->file_length = size; - curlun->num_sectors = num_sectors; - LDBG(curlun, "open backing file: %s\n", filename); - rc = 0; - -out: - filp_close(filp, current->files); - return rc; -} - - -static void close_backing_file(struct lun *curlun) -{ - if (curlun->filp) { - LDBG(curlun, "close backing file\n"); - fput(curlun->filp); - curlun->filp = NULL; - } -} - - -static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lun *curlun = dev_to_lun(dev); - - return sprintf(buf, "%d\n", curlun->ro); -} - -static ssize_t show_file(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = dev_get_drvdata(dev); - char *p; - ssize_t rc; - - down_read(&fsg->filesem); - if (backing_file_is_open(curlun)) { // Get the complete pathname - p = d_path(&curlun->filp->f_path, buf, PAGE_SIZE - 1); - if (IS_ERR(p)) - rc = PTR_ERR(p); - else { - rc = strlen(p); - memmove(buf, p, rc); - buf[rc] = '\n'; // Add a newline - buf[++rc] = 0; - } - } else { // No file, return 0 bytes - *buf = 0; - rc = 0; - } - up_read(&fsg->filesem); - return rc; -} - - -static ssize_t store_ro(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - ssize_t rc = count; - struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = dev_get_drvdata(dev); - int i; - - if (sscanf(buf, "%d", &i) != 1) - return -EINVAL; - - /* Allow the write-enable status to change only while the backing file - * is closed. */ - down_read(&fsg->filesem); - if (backing_file_is_open(curlun)) { - LDBG(curlun, "read-only status change prevented\n"); - rc = -EBUSY; - } else { - curlun->ro = !!i; - LDBG(curlun, "read-only status set to %d\n", curlun->ro); - } - up_read(&fsg->filesem); - return rc; -} - -static ssize_t store_file(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct lun *curlun = dev_to_lun(dev); - struct fsg_dev *fsg = dev_get_drvdata(dev); - int rc = 0; - - if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) { - LDBG(curlun, "eject attempt prevented\n"); - return -EBUSY; // "Door is locked" - } - - /* Remove a trailing newline */ - if (count > 0 && buf[count-1] == '\n') - ((char *) buf)[count-1] = 0; // Ugh! - - /* Eject current medium */ - down_write(&fsg->filesem); - if (backing_file_is_open(curlun)) { - close_backing_file(curlun); - curlun->unit_attention_data = SS_MEDIUM_NOT_PRESENT; - } - - /* Load new medium */ - if (count > 0 && buf[0]) { - rc = open_backing_file(curlun, buf); - if (rc == 0) - curlun->unit_attention_data = - SS_NOT_READY_TO_READY_TRANSITION; - } - up_write(&fsg->filesem); - return (rc < 0 ? rc : count); -} - /* The write permissions and store_xxx pointers are set in fsg_bind() */ -static DEVICE_ATTR(ro, 0444, show_ro, NULL); -static DEVICE_ATTR(file, 0444, show_file, NULL); +static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL); +static DEVICE_ATTR(file, 0444, fsg_show_file, NULL); /*-------------------------------------------------------------------------*/ @@ -3804,7 +3141,9 @@ static void fsg_release(struct kref *ref) static void lun_release(struct device *dev) { - struct fsg_dev *fsg = dev_get_drvdata(dev); + struct rw_semaphore *filesem = dev_get_drvdata(dev); + struct fsg_dev *fsg = + container_of(filesem, struct fsg_dev, filesem); kref_put(&fsg->ref, fsg_release); } @@ -3813,7 +3152,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) { struct fsg_dev *fsg = get_gadget_data(gadget); int i; - struct lun *curlun; + struct fsg_lun *curlun; struct usb_request *req = fsg->ep0req; DBG(fsg, "unbind\n"); @@ -3825,7 +3164,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) if (curlun->registered) { device_remove_file(&curlun->dev, &dev_attr_ro); device_remove_file(&curlun->dev, &dev_attr_file); - close_backing_file(curlun); + fsg_lun_close(curlun); device_unregister(&curlun->dev); curlun->registered = 0; } @@ -3841,7 +3180,7 @@ static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget) } /* Free the data buffers */ - for (i = 0; i < NUM_BUFFERS; ++i) + for (i = 0; i < FSG_NUM_BUFFERS; ++i) kfree(fsg->buffhds[i].buf); /* Free the request and buffer for endpoint 0 */ @@ -3948,7 +3287,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) struct fsg_dev *fsg = the_fsg; int rc; int i; - struct lun *curlun; + struct fsg_lun *curlun; struct usb_ep *ep; struct usb_request *req; char *pathbuf, *p; @@ -3963,10 +3302,10 @@ static int __init fsg_bind(struct usb_gadget *gadget) if (mod_data.removable) { // Enable the store_xxx attributes dev_attr_file.attr.mode = 0644; - dev_attr_file.store = store_file; + dev_attr_file.store = fsg_store_file; if (!mod_data.cdrom) { dev_attr_ro.attr.mode = 0644; - dev_attr_ro.store = store_ro; + dev_attr_ro.store = fsg_store_ro; } } @@ -3974,7 +3313,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) i = mod_data.nluns; if (i == 0) i = max(mod_data.num_filenames, 1u); - if (i > MAX_LUNS) { + if (i > FSG_MAX_LUNS) { ERROR(fsg, "invalid number of LUNs: %d\n", i); rc = -EINVAL; goto out; @@ -3982,7 +3321,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) /* Create the LUNs, open their backing files, and register the * LUN devices in sysfs. */ - fsg->luns = kzalloc(i * sizeof(struct lun), GFP_KERNEL); + fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL); if (!fsg->luns) { rc = -ENOMEM; goto out; @@ -3991,13 +3330,14 @@ static int __init fsg_bind(struct usb_gadget *gadget) for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; - curlun->ro = mod_data.ro[i]; - if (mod_data.cdrom) - curlun->ro = 1; + curlun->cdrom = !!mod_data.cdrom; + curlun->ro = mod_data.cdrom || mod_data.ro[i]; + curlun->initially_ro = curlun->ro; + curlun->removable = mod_data.removable; curlun->dev.release = lun_release; curlun->dev.parent = &gadget->dev; curlun->dev.driver = &fsg_driver.driver; - dev_set_drvdata(&curlun->dev, fsg); + dev_set_drvdata(&curlun->dev, &fsg->filesem); dev_set_name(&curlun->dev,"%s-lun%d", dev_name(&gadget->dev), i); @@ -4016,7 +3356,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) kref_get(&fsg->ref); if (mod_data.file[i] && *mod_data.file[i]) { - if ((rc = open_backing_file(curlun, + if ((rc = fsg_lun_open(curlun, mod_data.file[i])) != 0) goto out; } else if (!mod_data.removable) { @@ -4028,20 +3368,20 @@ static int __init fsg_bind(struct usb_gadget *gadget) /* Find all the endpoints we will use */ usb_ep_autoconfig_reset(gadget); - ep = usb_ep_autoconfig(gadget, &fs_bulk_in_desc); + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc); if (!ep) goto autoconf_fail; ep->driver_data = fsg; // claim the endpoint fsg->bulk_in = ep; - ep = usb_ep_autoconfig(gadget, &fs_bulk_out_desc); + ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc); if (!ep) goto autoconf_fail; ep->driver_data = fsg; // claim the endpoint fsg->bulk_out = ep; if (transport_is_cbi()) { - ep = usb_ep_autoconfig(gadget, &fs_intr_in_desc); + ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc); if (!ep) goto autoconf_fail; ep->driver_data = fsg; // claim the endpoint @@ -4055,28 +3395,28 @@ static int __init fsg_bind(struct usb_gadget *gadget) device_desc.bcdDevice = cpu_to_le16(mod_data.release); i = (transport_is_cbi() ? 3 : 2); // Number of endpoints - intf_desc.bNumEndpoints = i; - intf_desc.bInterfaceSubClass = mod_data.protocol_type; - intf_desc.bInterfaceProtocol = mod_data.transport_type; - fs_function[i + FS_FUNCTION_PRE_EP_ENTRIES] = NULL; + fsg_intf_desc.bNumEndpoints = i; + fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type; + fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type; + fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL; if (gadget_is_dualspeed(gadget)) { - hs_function[i + HS_FUNCTION_PRE_EP_ENTRIES] = NULL; + fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL; /* Assume ep0 uses the same maxpacket value for both speeds */ dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket; /* Assume endpoint addresses are the same for both speeds */ - hs_bulk_in_desc.bEndpointAddress = - fs_bulk_in_desc.bEndpointAddress; - hs_bulk_out_desc.bEndpointAddress = - fs_bulk_out_desc.bEndpointAddress; - hs_intr_in_desc.bEndpointAddress = - fs_intr_in_desc.bEndpointAddress; + fsg_hs_bulk_in_desc.bEndpointAddress = + fsg_fs_bulk_in_desc.bEndpointAddress; + fsg_hs_bulk_out_desc.bEndpointAddress = + fsg_fs_bulk_out_desc.bEndpointAddress; + fsg_hs_intr_in_desc.bEndpointAddress = + fsg_fs_intr_in_desc.bEndpointAddress; } if (gadget_is_otg(gadget)) - otg_desc.bmAttributes |= USB_OTG_HNP; + fsg_otg_desc.bmAttributes |= USB_OTG_HNP; rc = -ENOMEM; @@ -4090,7 +3430,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) req->complete = ep0_complete; /* Allocate the data buffers */ - for (i = 0; i < NUM_BUFFERS; ++i) { + for (i = 0; i < FSG_NUM_BUFFERS; ++i) { struct fsg_buffhd *bh = &fsg->buffhds[i]; /* Allocate for the bulk-in endpoint. We assume that @@ -4101,23 +3441,24 @@ static int __init fsg_bind(struct usb_gadget *gadget) goto out; bh->next = bh + 1; } - fsg->buffhds[NUM_BUFFERS - 1].next = &fsg->buffhds[0]; + fsg->buffhds[FSG_NUM_BUFFERS - 1].next = &fsg->buffhds[0]; /* This should reflect the actual gadget power source */ usb_gadget_set_selfpowered(gadget); - snprintf(manufacturer, sizeof manufacturer, "%s %s with %s", + snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer, + "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); /* On a real device, serial[] would be loaded from permanent * storage. We just encode it from the driver version string. */ - for (i = 0; i < sizeof(serial) - 2; i += 2) { + for (i = 0; i < sizeof fsg_string_serial - 2; i += 2) { unsigned char c = DRIVER_VERSION[i / 2]; if (!c) break; - sprintf(&serial[i], "%02X", c); + sprintf(&fsg_string_serial[i], "%02X", c); } fsg->thread_task = kthread_create(fsg_main_thread, fsg, @@ -4133,7 +3474,7 @@ static int __init fsg_bind(struct usb_gadget *gadget) pathbuf = kmalloc(PATH_MAX, GFP_KERNEL); for (i = 0; i < fsg->nluns; ++i) { curlun = &fsg->luns[i]; - if (backing_file_is_open(curlun)) { + if (fsg_lun_is_open(curlun)) { p = NULL; if (pathbuf) { p = d_path(&curlun->filp->f_path, @@ -4203,7 +3544,7 @@ static struct usb_gadget_driver fsg_driver = { #else .speed = USB_SPEED_FULL, #endif - .function = (char *) longname, + .function = (char *) fsg_string_product, .bind = fsg_bind, .unbind = fsg_unbind, .disconnect = fsg_disconnect, @@ -4212,7 +3553,7 @@ static struct usb_gadget_driver fsg_driver = { .resume = fsg_resume, .driver = { - .name = (char *) shortname, + .name = DRIVER_NAME, .owner = THIS_MODULE, // .release = ... // .suspend = ... |