diff options
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r-- | drivers/usb/dwc3/Makefile | 2 | ||||
-rw-r--r-- | drivers/usb/dwc3/core.c | 15 | ||||
-rw-r--r-- | drivers/usb/dwc3/debug.c | 32 | ||||
-rw-r--r-- | drivers/usb/dwc3/debug.h | 7 | ||||
-rw-r--r-- | drivers/usb/dwc3/ep0.c | 46 | ||||
-rw-r--r-- | drivers/usb/dwc3/gadget.c | 57 |
6 files changed, 24 insertions, 135 deletions
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile index 84de1e4151c4..ffca34029b21 100644 --- a/drivers/usb/dwc3/Makefile +++ b/drivers/usb/dwc3/Makefile @@ -6,7 +6,7 @@ obj-$(CONFIG_USB_DWC3) += dwc3.o dwc3-y := core.o ifneq ($(CONFIG_FTRACE),) - dwc3-y += debug.o trace.o + dwc3-y += trace.o endif ifneq ($(filter y,$(CONFIG_USB_DWC3_HOST) $(CONFIG_USB_DWC3_DUAL_ROLE)),) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 5e61ef6a378d..037052db50ef 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -305,13 +305,7 @@ static int dwc3_event_buffers_setup(struct dwc3 *dwc) struct dwc3_event_buffer *evt; evt = dwc->ev_buf; - dwc3_trace(trace_dwc3_core, - "Event buf %p dma %08llx length %d\n", - evt->buf, (unsigned long long) evt->dma, - evt->length); - evt->lpos = 0; - dwc3_writel(dwc->regs, DWC3_GEVNTADRLO(0), lower_32_bits(evt->dma)); dwc3_writel(dwc->regs, DWC3_GEVNTADRHI(0), @@ -428,9 +422,6 @@ static void dwc3_core_num_eps(struct dwc3 *dwc) dwc->num_in_eps = DWC3_NUM_IN_EPS(parms); dwc->num_out_eps = DWC3_NUM_EPS(parms) - dwc->num_in_eps; - - dwc3_trace(trace_dwc3_core, "found %d IN and %d OUT endpoints", - dwc->num_in_eps, dwc->num_out_eps); } static void dwc3_cache_hwparams(struct dwc3 *dwc) @@ -656,13 +647,13 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc) reg |= DWC3_GCTL_GBLHIBERNATIONEN; break; default: - dwc3_trace(trace_dwc3_core, "No power optimization available\n"); + /* nothing */ + break; } /* check if current dwc3 is on simulation board */ if (dwc->hwparams.hwparams6 & DWC3_GHWPARAMS6_EN_FPGA) { - dwc3_trace(trace_dwc3_core, - "running on FPGA platform\n"); + dev_info(dwc->dev, "Running with FPGA optmizations\n"); dwc->is_fpga = true; } diff --git a/drivers/usb/dwc3/debug.c b/drivers/usb/dwc3/debug.c deleted file mode 100644 index 0be6885bc370..000000000000 --- a/drivers/usb/dwc3/debug.c +++ /dev/null @@ -1,32 +0,0 @@ -/** - * debug.c - DesignWare USB3 DRD Controller Debug/Trace Support - * - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com - * - * Author: Felipe Balbi <balbi@ti.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 of - * the License as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include "debug.h" - -void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...) -{ - struct va_format vaf; - va_list args; - - va_start(args, fmt); - vaf.fmt = fmt; - vaf.va = &args; - - trace(&vaf); - - va_end(args); -} diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index d93780e84f07..eeed4ffd8131 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -345,13 +345,6 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status) } -#if IS_ENABLED(CONFIG_FTRACE) -void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...); -#else -static inline void dwc3_trace(void (*trace)(struct va_format *), const char *fmt, ...) -{ } -#endif - #ifdef CONFIG_DEBUG_FS extern void dwc3_debugfs_init(struct dwc3 *); extern void dwc3_debugfs_exit(struct dwc3 *); diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 15b62a5aaff8..2b22ea7263d8 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -49,10 +49,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma, int ret; dep = dwc->eps[epnum]; - if (dep->flags & DWC3_EP_BUSY) { - dwc3_trace(trace_dwc3_ep0, "%s still busy", dep->name); + if (dep->flags & DWC3_EP_BUSY) return 0; - } trb = &dwc->ep0_trb[dep->trb_enqueue]; @@ -144,9 +142,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, if (dwc->ep0state == EP0_STATUS_PHASE) __dwc3_ep0_do_control_status(dwc, dwc->eps[direction]); - else - dwc3_trace(trace_dwc3_ep0, - "too early for delayed status"); return 0; } @@ -210,9 +205,8 @@ int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, spin_lock_irqsave(&dwc->lock, flags); if (!dep->endpoint.desc) { - dwc3_trace(trace_dwc3_ep0, - "trying to queue request %p to disabled %s", - request, dep->name); + dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", + dep->name); ret = -ESHUTDOWN; goto out; } @@ -574,13 +568,12 @@ static int dwc3_ep0_set_address(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) addr = le16_to_cpu(ctrl->wValue); if (addr > 127) { - dwc3_trace(trace_dwc3_ep0, "invalid device address %d", addr); + dev_err(dwc->dev, "invalid device address %d\n", addr); return -EINVAL; } if (state == USB_STATE_CONFIGURED) { - dwc3_trace(trace_dwc3_ep0, - "trying to set address when configured"); + dev_err(dwc->dev, "can't SetAddress() from Configured State\n"); return -EINVAL; } @@ -765,35 +758,27 @@ static int dwc3_ep0_std_request(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl) switch (ctrl->bRequest) { case USB_REQ_GET_STATUS: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_GET_STATUS"); ret = dwc3_ep0_handle_status(dwc, ctrl); break; case USB_REQ_CLEAR_FEATURE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_CLEAR_FEATURE"); ret = dwc3_ep0_handle_feature(dwc, ctrl, 0); break; case USB_REQ_SET_FEATURE: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_FEATURE"); ret = dwc3_ep0_handle_feature(dwc, ctrl, 1); break; case USB_REQ_SET_ADDRESS: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ADDRESS"); ret = dwc3_ep0_set_address(dwc, ctrl); break; case USB_REQ_SET_CONFIGURATION: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_CONFIGURATION"); ret = dwc3_ep0_set_config(dwc, ctrl); break; case USB_REQ_SET_SEL: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_SEL"); ret = dwc3_ep0_set_sel(dwc, ctrl); break; case USB_REQ_SET_ISOCH_DELAY: - dwc3_trace(trace_dwc3_ep0, "USB_REQ_SET_ISOCH_DELAY"); ret = dwc3_ep0_set_isoch_delay(dwc, ctrl); break; default: - dwc3_trace(trace_dwc3_ep0, "Forwarding to gadget driver"); ret = dwc3_ep0_delegate_req(dwc, ctrl); break; } @@ -869,9 +854,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (status == DWC3_TRBSTS_SETUP_PENDING) { dwc->setup_packet_pending = true; - - dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); - if (r) dwc3_gadget_giveback(ep0, r, -ECONNRESET); @@ -961,7 +943,7 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, ret = dwc3_gadget_set_test_mode(dwc, dwc->test_mode_nr); if (ret < 0) { - dwc3_trace(trace_dwc3_ep0, "Invalid Test #%d", + dev_err(dwc->dev, "invalid test #%d\n", dwc->test_mode_nr); dwc3_ep0_stall_and_restart(dwc); return; @@ -969,10 +951,8 @@ static void dwc3_ep0_complete_status(struct dwc3 *dwc, } status = DWC3_TRB_SIZE_TRBSTS(trb->size); - if (status == DWC3_TRBSTS_SETUP_PENDING) { + if (status == DWC3_TRBSTS_SETUP_PENDING) dwc->setup_packet_pending = true; - dwc3_trace(trace_dwc3_ep0, "Setup Pending received"); - } dwc->ep0state = EP0_SETUP_PHASE; dwc3_ep0_out_start(dwc); @@ -1022,10 +1002,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); - if (ret) { - dwc3_trace(trace_dwc3_ep0, "failed to map request"); + if (ret) return; - } maxpacket = dep->endpoint.maxpacket; @@ -1050,10 +1028,8 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc, } else { ret = usb_gadget_map_request(&dwc->gadget, &req->request, dep->number); - if (ret) { - dwc3_trace(trace_dwc3_ep0, "failed to map request"); + if (ret) return; - } ret = dwc3_ep0_start_trans(dwc, dep->number, req->request.dma, req->request.length, DWC3_TRBCTL_CONTROL_DATA, @@ -1123,8 +1099,7 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, if (dwc->ep0_expect_in != event->endpoint_number) { struct dwc3_ep *dep = dwc->eps[dwc->ep0_expect_in]; - dwc3_trace(trace_dwc3_ep0, - "Wrong direction for Data phase"); + dev_err(dwc->dev, "unexpected direction for Data Phase\n"); dwc3_ep0_end_control_data(dwc, dep); dwc3_ep0_stall_and_restart(dwc); return; @@ -1140,7 +1115,6 @@ static void dwc3_ep0_xfernotready(struct dwc3 *dwc, if (dwc->delayed_status) { WARN_ON_ONCE(event->endpoint_number != 1); - dwc3_trace(trace_dwc3_ep0, "Delayed Status"); return; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 7e39f0cf4436..e47cba55c431 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -139,9 +139,6 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state) udelay(5); } - dwc3_trace(trace_dwc3_gadget, - "link state change request timed out"); - return -ETIMEDOUT; } @@ -1115,8 +1112,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, u32 uf; if (list_empty(&dep->pending_list)) { - dwc3_trace(trace_dwc3_gadget, - "ISOC ep %s run out for requests", + dev_info(dwc->dev, "%s: ran out of requests\n", dep->name); dep->flags |= DWC3_EP_PENDING_REQUEST; return; @@ -1145,16 +1141,15 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) int ret; if (!dep->endpoint.desc) { - dwc3_trace(trace_dwc3_gadget, - "trying to queue request %p to disabled %s", - &req->request, dep->endpoint.name); + dev_err(dwc->dev, "%s: can't queue to disabled endpoint\n", + dep->name); return -ESHUTDOWN; } if (WARN(req->dep != dep, "request %p belongs to '%s'\n", &req->request, req->dep->name)) { - dwc3_trace(trace_dwc3_gadget, "request %p belongs to '%s'", - &req->request, req->dep->name); + dev_err(dwc->dev, "%s: request %p belongs to '%s'\n", + dep->name, &req->request, req->dep->name); return -EINVAL; } @@ -1204,10 +1199,6 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return 0; ret = __dwc3_gadget_kick_transfer(dep, 0); - if (ret && ret != -EBUSY) - dwc3_trace(trace_dwc3_gadget, - "%s: failed to kick transfers", - dep->name); if (ret == -EBUSY) ret = 0; @@ -1226,7 +1217,6 @@ static int __dwc3_gadget_ep_queue_zlp(struct dwc3 *dwc, struct dwc3_ep *dep) struct usb_request *request; struct usb_ep *ep = &dep->endpoint; - dwc3_trace(trace_dwc3_gadget, "queueing ZLP"); request = dwc3_gadget_ep_alloc_request(ep, GFP_ATOMIC); if (!request) return -ENOMEM; @@ -1345,9 +1335,6 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) if (!protocol && ((dep->direction && transfer_in_flight) || (!dep->direction && started))) { - dwc3_trace(trace_dwc3_gadget, - "%s: pending request, cannot halt", - dep->name); return -EAGAIN; } @@ -1465,10 +1452,8 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) speed = reg & DWC3_DSTS_CONNECTSPD; if ((speed == DWC3_DSTS_SUPERSPEED) || - (speed == DWC3_DSTS_SUPERSPEED_PLUS)) { - dwc3_trace(trace_dwc3_gadget, "no wakeup on SuperSpeed"); + (speed == DWC3_DSTS_SUPERSPEED_PLUS)) return 0; - } link_state = DWC3_DSTS_USBLNKST(reg); @@ -1477,9 +1462,6 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc) case DWC3_LINK_STATE_U3: /* in HS, means SUSPEND */ break; default: - dwc3_trace(trace_dwc3_gadget, - "can't wakeup from '%s'", - dwc3_gadget_link_string(link_state)); return -EINVAL; } @@ -1584,11 +1566,6 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) if (!timeout) return -ETIMEDOUT; - dwc3_trace(trace_dwc3_gadget, "gadget %s data soft-%s", - dwc->gadget_driver - ? dwc->gadget_driver->function : "no-function", - is_on ? "connect" : "disconnect"); - return 0; } @@ -1910,8 +1887,6 @@ static int dwc3_gadget_init_hw_endpoints(struct dwc3 *dwc, dep->endpoint.name = dep->name; spin_lock_init(&dep->lock); - dwc3_trace(trace_dwc3_gadget, "initializing %s", dep->name); - if (epnum == 0 || epnum == 1) { usb_ep_set_maxpacket_limit(&dep->endpoint, 512); dep->endpoint.maxburst = 1; @@ -1958,15 +1933,13 @@ static int dwc3_gadget_init_endpoints(struct dwc3 *dwc) ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_out_eps, 0); if (ret < 0) { - dwc3_trace(trace_dwc3_gadget, - "failed to allocate OUT endpoints"); + dev_err(dwc->dev, "failed to initialize OUT endpoints\n"); return ret; } ret = dwc3_gadget_init_hw_endpoints(dwc, dwc->num_in_eps, 1); if (ret < 0) { - dwc3_trace(trace_dwc3_gadget, - "failed to allocate IN endpoints"); + dev_err(dwc->dev, "failed to initialize IN endpoints\n"); return ret; } @@ -2041,9 +2014,6 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep, if (count) { trb_status = DWC3_TRB_SIZE_TRBSTS(trb->size); if (trb_status == DWC3_TRBSTS_MISSED_ISOC) { - dwc3_trace(trace_dwc3_gadget, - "%s: incomplete IN transfer", - dep->name); /* * If missed isoc occurred and there is * no request queued then issue END @@ -2669,8 +2639,6 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, (pwropt != DWC3_GHWPARAMS1_EN_PWROPT_HIB)) { if ((dwc->link_state == DWC3_LINK_STATE_U3) && (next == DWC3_LINK_STATE_RESUME)) { - dwc3_trace(trace_dwc3_gadget, - "ignoring transition U3 -> Resume"); return; } } @@ -2804,11 +2772,7 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc, break; case DWC3_DEVICE_EVENT_EOPF: /* It changed to be suspend event for version 2.30a and above */ - if (dwc->revision < DWC3_REVISION_230A) { - dwc3_trace(trace_dwc3_gadget, "End of Periodic Frame"); - } else { - dwc3_trace(trace_dwc3_gadget, "U3/L1-L2 Suspend Event"); - + if (dwc->revision >= DWC3_REVISION_230A) { /* * Ignore suspend event until the gadget enters into * USB_STATE_CONFIGURED state. @@ -3059,8 +3023,7 @@ int dwc3_gadget_init(struct dwc3 *dwc) * composite.c that we are USB 2.0 + LPM ECN. */ if (dwc->revision < DWC3_REVISION_220A) - dwc3_trace(trace_dwc3_gadget, - "Changing max_speed on rev %08x", + dev_info(dwc->dev, "changing max_speed on rev %08x\n", dwc->revision); dwc->gadget.max_speed = dwc->maximum_speed; |