diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 16 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 29 | ||||
-rw-r--r-- | drivers/tty/serial/kgdboc.c | 4 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 11 | ||||
-rw-r--r-- | drivers/tty/tty_port.c | 3 |
5 files changed, 25 insertions, 38 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index dd5e1cede2b5..c3f933d10295 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -213,17 +213,17 @@ static int mtk8250_probe(struct platform_device *pdev) platform_set_drvdata(pdev, data); - pm_runtime_enable(&pdev->dev); - if (!pm_runtime_enabled(&pdev->dev)) { - err = mtk8250_runtime_resume(&pdev->dev); - if (err) - return err; - } + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + return err; data->line = serial8250_register_8250_port(&uart); if (data->line < 0) return data->line; + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + return 0; } @@ -234,13 +234,11 @@ static int mtk8250_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); serial8250_unregister_port(data->line); + mtk8250_runtime_suspend(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); - if (!pm_runtime_status_suspended(&pdev->dev)) - mtk8250_runtime_suspend(&pdev->dev); - return 0; } diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index f776b3eafb96..3f779d25ec0c 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -552,30 +552,11 @@ static unsigned int serial_icr_read(struct uart_8250_port *up, int offset) */ static void serial8250_clear_fifos(struct uart_8250_port *p) { - unsigned char fcr; - unsigned char clr_mask = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT; - if (p->capabilities & UART_CAP_FIFO) { - /* - * Make sure to avoid changing FCR[7:3] and ENABLE_FIFO bits. - * In case ENABLE_FIFO is not set, there is nothing to flush - * so just return. Furthermore, on certain implementations of - * the 8250 core, the FCR[7:3] bits may only be changed under - * specific conditions and changing them if those conditions - * are not met can have nasty side effects. One such core is - * the 8250-omap present in TI AM335x. - */ - fcr = serial_in(p, UART_FCR); - - /* FIFO is not enabled, there's nothing to clear. */ - if (!(fcr & UART_FCR_ENABLE_FIFO)) - return; - - fcr |= clr_mask; - serial_out(p, UART_FCR, fcr); - - fcr &= ~clr_mask; - serial_out(p, UART_FCR, fcr); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO); + serial_out(p, UART_FCR, UART_FCR_ENABLE_FIFO | + UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT); + serial_out(p, UART_FCR, 0); } } @@ -1467,7 +1448,7 @@ static void __do_stop_tx_rs485(struct uart_8250_port *p) * Enable previously disabled RX interrupts. */ if (!(p->port.rs485.flags & SER_RS485_RX_DURING_TX)) { - serial8250_clear_fifos(p); + serial8250_clear_and_reinit_fifos(p); p->ier |= UART_IER_RLSI | UART_IER_RDI; serial_port_out(&p->port, UART_IER, p->ier); diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c index baeeeaec3f03..6fb312e7af71 100644 --- a/drivers/tty/serial/kgdboc.c +++ b/drivers/tty/serial/kgdboc.c @@ -233,7 +233,7 @@ static void kgdboc_put_char(u8 chr) static int param_set_kgdboc_var(const char *kmessage, const struct kernel_param *kp) { - int len = strlen(kmessage); + size_t len = strlen(kmessage); if (len >= MAX_CONFIG_LEN) { pr_err("config string too long\n"); @@ -254,7 +254,7 @@ static int param_set_kgdboc_var(const char *kmessage, strcpy(config, kmessage); /* Chop out \n char as a result of echo */ - if (config[len - 1] == '\n') + if (len && config[len - 1] == '\n') config[len - 1] = '\0'; if (configured == 1) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index ee80dfbd5442..687250ec8032 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1373,7 +1373,13 @@ err_release_lock: return ERR_PTR(retval); } -static void tty_free_termios(struct tty_struct *tty) +/** + * tty_save_termios() - save tty termios data in driver table + * @tty: tty whose termios data to save + * + * Locking: Caller guarantees serialisation with tty_init_termios(). + */ +void tty_save_termios(struct tty_struct *tty) { struct ktermios *tp; int idx = tty->index; @@ -1392,6 +1398,7 @@ static void tty_free_termios(struct tty_struct *tty) } *tp = tty->termios; } +EXPORT_SYMBOL_GPL(tty_save_termios); /** * tty_flush_works - flush all works of a tty/pty pair @@ -1491,7 +1498,7 @@ static void release_tty(struct tty_struct *tty, int idx) WARN_ON(!mutex_is_locked(&tty_mutex)); if (tty->ops->shutdown) tty->ops->shutdown(tty); - tty_free_termios(tty); + tty_save_termios(tty); tty_driver_remove_tty(tty->driver, tty); tty->port->itty = NULL; if (tty->link) diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index cb6075096a5b..044c3cbdcfa4 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -633,7 +633,8 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, if (tty_port_close_start(port, tty, filp) == 0) return; tty_port_shutdown(port, tty); - set_bit(TTY_IO_ERROR, &tty->flags); + if (!port->console) + set_bit(TTY_IO_ERROR, &tty->flags); tty_port_close_end(port, tty); tty_port_tty_set(port, NULL); } |