summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_xen.c50
-rw-r--r--drivers/tty/serial/8250/8250_exar.c14
-rw-r--r--drivers/tty/serial/amba-pl011.c8
-rw-r--r--drivers/tty/serial/atmel_serial.c8
-rw-r--r--drivers/tty/serial/kgdboc.c20
-rw-r--r--drivers/tty/serial/pch_uart.c2
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c32
-rw-r--r--drivers/tty/serial/serial_core.c5
8 files changed, 85 insertions, 54 deletions
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index 7c23112dc923..5bddb2f5e931 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -52,17 +52,22 @@ static DEFINE_SPINLOCK(xencons_lock);
static struct xencons_info *vtermno_to_xencons(int vtermno)
{
- struct xencons_info *entry, *n, *ret = NULL;
+ struct xencons_info *entry, *ret = NULL;
+ unsigned long flags;
- if (list_empty(&xenconsoles))
- return NULL;
+ spin_lock_irqsave(&xencons_lock, flags);
+ if (list_empty(&xenconsoles)) {
+ spin_unlock_irqrestore(&xencons_lock, flags);
+ return NULL;
+ }
- list_for_each_entry_safe(entry, n, &xenconsoles, list) {
+ list_for_each_entry(entry, &xenconsoles, list) {
if (entry->vtermno == vtermno) {
ret = entry;
break;
}
}
+ spin_unlock_irqrestore(&xencons_lock, flags);
return ret;
}
@@ -223,7 +228,7 @@ static int xen_hvm_console_init(void)
{
int r;
uint64_t v = 0;
- unsigned long gfn;
+ unsigned long gfn, flags;
struct xencons_info *info;
if (!xen_hvm_domain())
@@ -258,9 +263,9 @@ static int xen_hvm_console_init(void)
goto err;
info->vtermno = HVC_COOKIE;
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
err:
@@ -283,6 +288,7 @@ static int xencons_info_pv_init(struct xencons_info *info, int vtermno)
static int xen_pv_console_init(void)
{
struct xencons_info *info;
+ unsigned long flags;
if (!xen_pv_domain())
return -ENODEV;
@@ -299,9 +305,9 @@ static int xen_pv_console_init(void)
/* already configured */
return 0;
}
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
xencons_info_pv_init(info, HVC_COOKIE);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
}
@@ -309,6 +315,7 @@ static int xen_pv_console_init(void)
static int xen_initial_domain_console_init(void)
{
struct xencons_info *info;
+ unsigned long flags;
if (!xen_initial_domain())
return -ENODEV;
@@ -323,9 +330,9 @@ static int xen_initial_domain_console_init(void)
info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false);
info->vtermno = HVC_COOKIE;
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
}
@@ -380,10 +387,12 @@ static void xencons_free(struct xencons_info *info)
static int xen_console_remove(struct xencons_info *info)
{
+ unsigned long flags;
+
xencons_disconnect_backend(info);
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
if (info->xbdev != NULL)
xencons_free(info);
else {
@@ -394,9 +403,9 @@ static int xen_console_remove(struct xencons_info *info)
return 0;
}
-static int xencons_remove(struct xenbus_device *dev)
+static void xencons_remove(struct xenbus_device *dev)
{
- return xen_console_remove(dev_get_drvdata(&dev->dev));
+ xen_console_remove(dev_get_drvdata(&dev->dev));
}
static int xencons_connect_backend(struct xenbus_device *dev,
@@ -464,6 +473,7 @@ static int xencons_probe(struct xenbus_device *dev,
{
int ret, devid;
struct xencons_info *info;
+ unsigned long flags;
devid = dev->nodename[strlen(dev->nodename) - 1] - '0';
if (devid == 0)
@@ -482,9 +492,9 @@ static int xencons_probe(struct xenbus_device *dev,
ret = xencons_connect_backend(dev, info);
if (ret < 0)
goto error;
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_add_tail(&info->list, &xenconsoles);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
return 0;
@@ -584,10 +594,12 @@ static int __init xen_hvc_init(void)
info->hvc = hvc_alloc(HVC_COOKIE, info->irq, ops, 256);
if (IS_ERR(info->hvc)) {
+ unsigned long flags;
+
r = PTR_ERR(info->hvc);
- spin_lock(&xencons_lock);
+ spin_lock_irqsave(&xencons_lock, flags);
list_del(&info->list);
- spin_unlock(&xencons_lock);
+ spin_unlock_irqrestore(&xencons_lock, flags);
if (info->irq)
unbind_from_irqhandler(info->irq, NULL);
kfree(info);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 314a05e009df..64770c62bbec 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -43,6 +43,12 @@
#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358
#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358
+#define PCI_DEVICE_ID_SEALEVEL_710xC 0x1001
+#define PCI_DEVICE_ID_SEALEVEL_720xC 0x1002
+#define PCI_DEVICE_ID_SEALEVEL_740xC 0x1004
+#define PCI_DEVICE_ID_SEALEVEL_780xC 0x1008
+#define PCI_DEVICE_ID_SEALEVEL_716xC 0x1010
+
#define UART_EXAR_INT0 0x80
#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
@@ -638,6 +644,8 @@ exar_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *ent)
nr_ports = BIT(((pcidev->device & 0x38) >> 3) - 1);
else if (board->num_ports)
nr_ports = board->num_ports;
+ else if (pcidev->vendor == PCI_VENDOR_ID_SEALEVEL)
+ nr_ports = pcidev->device & 0xff;
else
nr_ports = pcidev->device & 0x0f;
@@ -864,6 +872,12 @@ static const struct pci_device_id exar_pci_tbl[] = {
EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
EXAR_DEVICE(COMMTECH, 2324PCI335, pbn_fastcom335_4),
EXAR_DEVICE(COMMTECH, 2328PCI335, pbn_fastcom335_8),
+
+ EXAR_DEVICE(SEALEVEL, 710xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 720xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 740xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 780xC, pbn_exar_XR17V35x),
+ EXAR_DEVICE(SEALEVEL, 716xC, pbn_exar_XR17V35x),
{ 0, }
};
MODULE_DEVICE_TABLE(pci, exar_pci_tbl);
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d75c39f4622b..d8c2f3455eeb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1466,6 +1466,10 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
struct circ_buf *xmit = &uap->port.state->xmit;
int count = uap->fifosize >> 1;
+ if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
+ !uap->rs485_tx_started)
+ pl011_rs485_tx_start(uap);
+
if (uap->port.x_char) {
if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
return true;
@@ -1477,10 +1481,6 @@ static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
return false;
}
- if ((uap->port.rs485.flags & SER_RS485_ENABLED) &&
- !uap->rs485_tx_started)
- pl011_rs485_tx_start(uap);
-
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
return true;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f1c06e12efa0..9cd7479b03c0 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2657,13 +2657,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
else if (mr == ATMEL_US_PAR_ODD)
*parity = 'o';
- /*
- * The serial core only rounds down when matching this to a
- * supported baud rate. Make sure we don't end up slightly
- * lower than one of those, as it would make us fall through
- * to a much lower baud rate than we really want.
- */
- *baud = port->uartclk / (16 * (quot - 1));
+ *baud = port->uartclk / (16 * quot);
}
static int __init atmel_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index a3ed9b34e2ab..7ce7bb164005 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -171,6 +171,7 @@ static int configure_kgdboc(void)
int err = -ENODEV;
char *cptr = config;
struct console *cons;
+ int cookie;
if (!strlen(config) || isspace(config[0])) {
err = 0;
@@ -189,20 +190,9 @@ static int configure_kgdboc(void)
if (kgdboc_register_kbd(&cptr))
goto do_register;
- /*
- * tty_find_polling_driver() can call uart_set_options()
- * (via poll_init) to configure the uart. Take the console_list_lock
- * in order to synchronize against register_console(), which can also
- * configure the uart via uart_set_options(). This also allows safe
- * traversal of the console list.
- */
- console_list_lock();
-
p = tty_find_polling_driver(cptr, &tty_line);
- if (!p) {
- console_list_unlock();
+ if (!p)
goto noconfig;
- }
/*
* Take console_lock to serialize device() callback with
@@ -211,7 +201,8 @@ static int configure_kgdboc(void)
*/
console_lock();
- for_each_console(cons) {
+ cookie = console_srcu_read_lock();
+ for_each_console_srcu(cons) {
int idx;
if (cons->device && cons->device(cons, &idx) == p &&
idx == tty_line) {
@@ -219,11 +210,10 @@ static int configure_kgdboc(void)
break;
}
}
+ console_srcu_read_unlock(cookie);
console_unlock();
- console_list_unlock();
-
kgdb_tty_driver = p;
kgdb_tty_line = tty_line;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 3d54a43768cd..9576ba8bbc40 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -749,7 +749,7 @@ static void pch_dma_tx_complete(void *arg)
uart_xmit_advance(port, sg_dma_len(sg));
async_tx_ack(priv->desc_tx);
- dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
+ dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
priv->tx_dma_use = 0;
priv->nent = 0;
priv->orig_nent = 0;
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index b487823f0e61..57f04f8bf504 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -864,9 +864,10 @@ out_unlock:
return IRQ_HANDLED;
}
-static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
+static int setup_fifos(struct qcom_geni_serial_port *port)
{
struct uart_port *uport;
+ u32 old_rx_fifo_depth = port->rx_fifo_depth;
uport = &port->uport;
port->tx_fifo_depth = geni_se_get_tx_fifo_depth(&port->se);
@@ -874,6 +875,16 @@ static void get_tx_fifo_size(struct qcom_geni_serial_port *port)
port->rx_fifo_depth = geni_se_get_rx_fifo_depth(&port->se);
uport->fifosize =
(port->tx_fifo_depth * port->tx_fifo_width) / BITS_PER_BYTE;
+
+ if (port->rx_fifo && (old_rx_fifo_depth != port->rx_fifo_depth) && port->rx_fifo_depth) {
+ port->rx_fifo = devm_krealloc(uport->dev, port->rx_fifo,
+ port->rx_fifo_depth * sizeof(u32),
+ GFP_KERNEL);
+ if (!port->rx_fifo)
+ return -ENOMEM;
+ }
+
+ return 0;
}
@@ -888,6 +899,7 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
u32 rxstale = DEFAULT_BITS_PER_CHAR * STALE_TIMEOUT;
u32 proto;
u32 pin_swap;
+ int ret;
proto = geni_se_read_proto(&port->se);
if (proto != GENI_SE_UART) {
@@ -897,7 +909,9 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport)
qcom_geni_serial_stop_rx(uport);
- get_tx_fifo_size(port);
+ ret = setup_fifos(port);
+ if (ret)
+ return ret;
writel(rxstale, uport->membase + SE_UART_RX_STALE_CNT);
@@ -1516,7 +1530,7 @@ static int qcom_geni_serial_remove(struct platform_device *pdev)
return 0;
}
-static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
+static int qcom_geni_serial_sys_suspend(struct device *dev)
{
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
struct uart_port *uport = &port->uport;
@@ -1533,7 +1547,7 @@ static int __maybe_unused qcom_geni_serial_sys_suspend(struct device *dev)
return uart_suspend_port(private_data->drv, uport);
}
-static int __maybe_unused qcom_geni_serial_sys_resume(struct device *dev)
+static int qcom_geni_serial_sys_resume(struct device *dev)
{
int ret;
struct qcom_geni_serial_port *port = dev_get_drvdata(dev);
@@ -1581,10 +1595,12 @@ static int qcom_geni_serial_sys_hib_resume(struct device *dev)
}
static const struct dev_pm_ops qcom_geni_serial_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_sys_suspend,
- qcom_geni_serial_sys_resume)
- .restore = qcom_geni_serial_sys_hib_resume,
- .thaw = qcom_geni_serial_sys_hib_resume,
+ .suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+ .resume = pm_sleep_ptr(qcom_geni_serial_sys_resume),
+ .freeze = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+ .poweroff = pm_sleep_ptr(qcom_geni_serial_sys_suspend),
+ .restore = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
+ .thaw = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume),
};
static const struct of_device_id qcom_geni_serial_match_table[] = {
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index b9fbbee598b8..ec874f3a567c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2212,6 +2212,9 @@ EXPORT_SYMBOL_GPL(uart_parse_options);
* @parity: parity character - 'n' (none), 'o' (odd), 'e' (even)
* @bits: number of data bits
* @flow: flow control character - 'r' (rts)
+ *
+ * Locking: Caller must hold console_list_lock in order to serialize
+ * early initialization of the serial-console lock.
*/
int
uart_set_options(struct uart_port *port, struct console *co,
@@ -2619,7 +2622,9 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
if (!ret && options) {
uart_parse_options(options, &baud, &parity, &bits, &flow);
+ console_list_lock();
ret = uart_set_options(port, NULL, baud, parity, bits, flow);
+ console_list_unlock();
}
out:
mutex_unlock(&tport->mutex);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 19:19:12 +0000