diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/pty.c | 85 | ||||
| -rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 24 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 27 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 12 | ||||
| -rw-r--r-- | drivers/tty/serial/st-asc.c | 1 |
5 files changed, 75 insertions, 74 deletions
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index d1399aac05a1..284749fb0f6b 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -448,48 +448,6 @@ err: return retval; } -/** - * pty_open_peer - open the peer of a pty - * @tty: the peer of the pty being opened - * - * Open the cached dentry in tty->link, providing a safe way for userspace - * to get the slave end of a pty (where they have the master fd and cannot - * access or trust the mount namespace /dev/pts was mounted inside). - */ -static struct file *pty_open_peer(struct tty_struct *tty, int flags) -{ - if (tty->driver->subtype != PTY_TYPE_MASTER) - return ERR_PTR(-EIO); - return dentry_open(tty->link->driver_data, flags, current_cred()); -} - -static int pty_get_peer(struct tty_struct *tty, int flags) -{ - int fd = -1; - struct file *filp = NULL; - int retval = -EINVAL; - - fd = get_unused_fd_flags(0); - if (fd < 0) { - retval = fd; - goto err; - } - - filp = pty_open_peer(tty, flags); - if (IS_ERR(filp)) { - retval = PTR_ERR(filp); - goto err_put; - } - - fd_install(fd, filp); - return fd; - -err_put: - put_unused_fd(fd); -err: - return retval; -} - static void pty_cleanup(struct tty_struct *tty) { tty_port_put(tty->port); @@ -646,9 +604,50 @@ static inline void legacy_pty_init(void) { } /* Unix98 devices */ #ifdef CONFIG_UNIX98_PTYS - static struct cdev ptmx_cdev; +/** + * pty_open_peer - open the peer of a pty + * @tty: the peer of the pty being opened + * + * Open the cached dentry in tty->link, providing a safe way for userspace + * to get the slave end of a pty (where they have the master fd and cannot + * access or trust the mount namespace /dev/pts was mounted inside). + */ +static struct file *pty_open_peer(struct tty_struct *tty, int flags) +{ + if (tty->driver->subtype != PTY_TYPE_MASTER) + return ERR_PTR(-EIO); + return dentry_open(tty->link->driver_data, flags, current_cred()); +} + +static int pty_get_peer(struct tty_struct *tty, int flags) +{ + int fd = -1; + struct file *filp = NULL; + int retval = -EINVAL; + + fd = get_unused_fd_flags(0); + if (fd < 0) { + retval = fd; + goto err; + } + + filp = pty_open_peer(tty, flags); + if (IS_ERR(filp)) { + retval = PTR_ERR(filp); + goto err_put; + } + + fd_install(fd, filp); + return fd; + +err_put: + put_unused_fd(fd); +err: + return retval; +} + static int pty_unix98_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg) { diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 343de8c384b0..898dcb091a27 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -619,6 +619,12 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port) TIOCSER_TEMT : 0; } +static bool lpuart_is_32(struct lpuart_port *sport) +{ + return sport->port.iotype == UPIO_MEM32 || + sport->port.iotype == UPIO_MEM32BE; +} + static irqreturn_t lpuart_txint(int irq, void *dev_id) { struct lpuart_port *sport = dev_id; @@ -627,7 +633,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) spin_lock_irqsave(&sport->port.lock, flags); if (sport->port.x_char) { - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart32_write(&sport->port, sport->port.x_char, UARTDATA); else writeb(sport->port.x_char, sport->port.membase + UARTDR); @@ -635,14 +641,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id) } if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart32_stop_tx(&sport->port); else lpuart_stop_tx(&sport->port); goto out; } - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart32_transmit_buffer(sport); else lpuart_transmit_buffer(sport); @@ -1978,12 +1984,12 @@ static int __init lpuart_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); else - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart32_console_get_options(sport, &baud, &parity, &bits); else lpuart_console_get_options(sport, &baud, &parity, &bits); - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart32_setup_watermark(sport); else lpuart_setup_watermark(sport); @@ -2118,7 +2124,7 @@ static int lpuart_probe(struct platform_device *pdev) } sport->port.irq = ret; sport->port.iotype = sdata->iotype; - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) sport->port.ops = &lpuart32_pops; else sport->port.ops = &lpuart_pops; @@ -2145,7 +2151,7 @@ static int lpuart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &sport->port); - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) + if (lpuart_is_32(sport)) lpuart_reg.cons = LPUART32_CONSOLE; else lpuart_reg.cons = LPUART_CONSOLE; @@ -2198,7 +2204,7 @@ static int lpuart_suspend(struct device *dev) struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { + if (lpuart_is_32(sport)) { /* disable Rx/Tx and interrupts */ temp = lpuart32_read(&sport->port, UARTCTRL); temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE); @@ -2249,7 +2255,7 @@ static int lpuart_resume(struct device *dev) if (sport->port.suspended && !sport->port.irq_wake) clk_prepare_enable(sport->clk); - if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) { + if (lpuart_is_32(sport)) { lpuart32_setup_watermark(sport); temp = lpuart32_read(&sport->port, UARTCTRL); temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE | diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 9e3162bf3bd1..80934e7bd67f 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -186,11 +186,6 @@ #define UART_NR 8 -/* RX DMA buffer periods */ -#define RX_DMA_PERIODS 4 -#define RX_BUF_SIZE (PAGE_SIZE) - - /* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */ enum imx_uart_type { IMX1_UART, @@ -226,7 +221,6 @@ struct imx_port { struct dma_chan *dma_chan_rx, *dma_chan_tx; struct scatterlist rx_sgl, tx_sgl[2]; void *rx_buf; - unsigned int rx_buf_size; struct circ_buf rx_ring; unsigned int rx_periods; dma_cookie_t rx_cookie; @@ -464,7 +458,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport) } } - while (!uart_circ_empty(xmit) && + while (!uart_circ_empty(xmit) && !sport->dma_is_txing && !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ @@ -967,6 +961,8 @@ static void imx_timeout(unsigned long data) } } +#define RX_BUF_SIZE (PAGE_SIZE) + /* * There are two kinds of RX DMA interrupts(such as in the MX6Q): * [1] the RX DMA buffer is full. @@ -1049,6 +1045,9 @@ static void dma_rx_callback(void *data) } } +/* RX DMA buffer periods */ +#define RX_DMA_PERIODS 4 + static int start_rx_dma(struct imx_port *sport) { struct scatterlist *sgl = &sport->rx_sgl; @@ -1059,8 +1058,9 @@ static int start_rx_dma(struct imx_port *sport) sport->rx_ring.head = 0; sport->rx_ring.tail = 0; + sport->rx_periods = RX_DMA_PERIODS; - sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size); + sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE); ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE); if (ret == 0) { dev_err(dev, "DMA mapping error for RX.\n"); @@ -1171,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport) goto err; } - sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL); + sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL); if (!sport->rx_buf) { ret = -ENOMEM; goto err; @@ -2036,7 +2036,6 @@ static int serial_imx_probe_dt(struct imx_port *sport, { struct device_node *np = pdev->dev.of_node; int ret; - u32 dma_buf_size[2]; sport->devdata = of_device_get_match_data(&pdev->dev); if (!sport->devdata) @@ -2060,14 +2059,6 @@ static int serial_imx_probe_dt(struct imx_port *sport, if (of_get_property(np, "rts-gpios", NULL)) sport->have_rtsgpio = 1; - if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) { - sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1]; - sport->rx_periods = dma_buf_size[1]; - } else { - sport->rx_buf_size = RX_BUF_SIZE; - sport->rx_periods = RX_DMA_PERIODS; - } - return 0; } #else diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index da5ddfc14778..e08b16b070c0 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1085,10 +1085,12 @@ static ssize_t rx_trigger_store(struct device *dev, { struct uart_port *port = dev_get_drvdata(dev); struct sci_port *sci = to_sci_port(port); + int ret; long r; - if (kstrtol(buf, 0, &r) == -EINVAL) - return -EINVAL; + ret = kstrtol(buf, 0, &r); + if (ret) + return ret; sci->rx_trigger = scif_set_rtrg(port, r); if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) @@ -1116,10 +1118,12 @@ static ssize_t rx_fifo_timeout_store(struct device *dev, { struct uart_port *port = dev_get_drvdata(dev); struct sci_port *sci = to_sci_port(port); + int ret; long r; - if (kstrtol(buf, 0, &r) == -EINVAL) - return -EINVAL; + ret = kstrtol(buf, 0, &r); + if (ret) + return ret; sci->rx_fifo_timeout = r; scif_set_rtrg(port, 1); if (r > 0) diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index f5335be344f6..6b0ca65027d0 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -758,6 +758,7 @@ static int asc_init_port(struct asc_port *ascport, if (IS_ERR(ascport->pinctrl)) { ret = PTR_ERR(ascport->pinctrl); dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret); + return ret; } ascport->states[DEFAULT] = |