4 files changed, 36 insertions, 13 deletions

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 484b6a3c9b03..302909ccf183 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -2643,9 +2643,9 @@ static int mxser_probe(struct pci_dev *pdev,
 				mxvar_sdriver, brd->idx + i, &pdev->dev);
 		if (IS_ERR(tty_dev)) {
 			retval = PTR_ERR(tty_dev);
-			for (i--; i >= 0; i--)
+			for (; i > 0; i--)
 				tty_unregister_device(mxvar_sdriver,
-					brd->idx + i);
+					brd->idx + i - 1);
 			goto err_relbrd;
 		}
 	}
@@ -2751,9 +2751,9 @@ static int __init mxser_module_init(void)
 			tty_dev = tty_port_register_device(&brd->ports[i].port,
 					mxvar_sdriver, brd->idx + i, NULL);
 			if (IS_ERR(tty_dev)) {
-				for (i--; i >= 0; i--)
+				for (; i > 0; i--)
 					tty_unregister_device(mxvar_sdriver,
-						brd->idx + i);
+						brd->idx + i - 1);
 				for (i = 0; i < brd->info->nports; i++)
 					tty_port_destroy(&brd->ports[i].port);
 				free_irq(brd->irq, brd);
diff --git a/drivers/tty/serial/8250/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c
index b3455a970a1d..35d9ab95c5cb 100644
--- a/drivers/tty/serial/8250/8250_pnp.c
+++ b/drivers/tty/serial/8250/8250_pnp.c
@@ -429,7 +429,6 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 {
 	struct uart_8250_port uart;
 	int ret, line, flags = dev_id->driver_data;
-	struct resource *res = NULL;
 
 	if (flags & UNKNOWN_DEV) {
 		ret = serial_pnp_guess_board(dev);
@@ -440,12 +439,11 @@ serial_pnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id)
 	memset(&uart, 0, sizeof(uart));
 	if (pnp_irq_valid(dev, 0))
 		uart.port.irq = pnp_irq(dev, 0);
-	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2))
-		res = pnp_get_resource(dev, IORESOURCE_IO, 2);
-	else if (pnp_port_valid(dev, 0))
-		res = pnp_get_resource(dev, IORESOURCE_IO, 0);
-	if (pnp_resource_enabled(res)) {
-		uart.port.iobase = res->start;
+	if ((flags & CIR_PORT) && pnp_port_valid(dev, 2)) {
+		uart.port.iobase = pnp_port_start(dev, 2);
+		uart.port.iotype = UPIO_PORT;
+	} else if (pnp_port_valid(dev, 0)) {
+		uart.port.iobase = pnp_port_start(dev, 0);
 		uart.port.iotype = UPIO_PORT;
 	} else if (pnp_mem_valid(dev, 0)) {
 		uart.port.mapbase = pnp_mem_start(dev, 0);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 4dc41408ecb7..30d4f7a783cd 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -886,6 +886,17 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
 	serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
 	/* FIFO ENABLE, DMA MODE */
 
+	up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK;
+	/*
+	 * NOTE: Setting OMAP_UART_SCR_RX_TRIG_GRANU1_MASK
+	 * sets Enables the granularity of 1 for TRIGGER RX
+	 * level. Along with setting RX FIFO trigger level
+	 * to 1 (as noted below, 16 characters) and TLR[3:0]
+	 * to zero this will result RX FIFO threshold level
+	 * to 1 character, instead of 16 as noted in comment
+	 * below.
+	 */
+
 	/* Set receive FIFO threshold to 16 characters and
 	 * transmit FIFO threshold to 16 spaces
 	 */
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 05400acbc456..b0452688308c 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -941,6 +941,14 @@ void start_tty(struct tty_struct *tty)
 
 EXPORT_SYMBOL(start_tty);
 
+static void tty_update_time(struct timespec *time)
+{
+	unsigned long sec = get_seconds();
+	sec -= sec % 60;
+	if ((long)(sec - time->tv_sec) > 0)
+		time->tv_sec = sec;
+}
+
 /**
  *	tty_read	-	read method for tty device files
  *	@file: pointer to tty file
@@ -960,10 +968,11 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
 			loff_t *ppos)
 {
 	int i;
+	struct inode *inode = file_inode(file);
 	struct tty_struct *tty = file_tty(file);
 	struct tty_ldisc *ld;
 
-	if (tty_paranoia_check(tty, file_inode(file), "tty_read"))
+	if (tty_paranoia_check(tty, inode, "tty_read"))
 		return -EIO;
 	if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
 		return -EIO;
@@ -977,6 +986,9 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
 		i = -EIO;
 	tty_ldisc_deref(ld);
 
+	if (i > 0)
+		tty_update_time(&inode->i_atime);
+
 	return i;
 }
 
@@ -1077,8 +1089,10 @@ static inline ssize_t do_tty_write(
 			break;
 		cond_resched();
 	}
-	if (written)
+	if (written) {
+		tty_update_time(&file_inode(file)->i_mtime);
 		ret = written;
+	}
 out:
 	tty_write_unlock(tty);
 	return ret;