summaryrefslogtreecommitdiffstats
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_dcc.c2
-rw-r--r--drivers/tty/serial/Kconfig14
-rw-r--r--drivers/tty/serial/amba-pl010.c2
-rw-r--r--drivers/tty/serial/amba-pl011.c2
-rw-r--r--drivers/tty/serial/atmel_serial.c16
-rw-r--r--drivers/tty/serial/crisv10.c10
-rw-r--r--drivers/tty/serial/mfd.c4
-rw-r--r--drivers/tty/serial/pch_uart.c19
-rw-r--r--drivers/tty/serial/pmac_zilog.c423
-rw-r--r--drivers/tty/serial/pmac_zilog.h19
-rw-r--r--drivers/tty/serial/sh-sci.c19
-rw-r--r--drivers/tty/serial/ucc_uart.c3
-rw-r--r--drivers/tty/sysrq.c2
-rw-r--r--drivers/tty/tty_io.c2
-rw-r--r--drivers/tty/tty_ldisc.c30
15 files changed, 221 insertions, 346 deletions
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 435f6facbc23..44fbebab5075 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -46,6 +46,7 @@ static inline char __dcc_getchar(void)
asm volatile("mrc p14, 0, %0, c0, c5, 0 @ read comms data reg"
: "=r" (__c));
+ isb();
return __c;
}
@@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c)
asm volatile("mcr p14, 0, %0, c0, c5, 0 @ write a char"
: /* no output register */
: "r" (c));
+ isb();
}
static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index edbc9b78f9b1..95b21a619900 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1560,7 +1560,7 @@ config SERIAL_IFX6X60
Support for the IFX6x60 modem devices on Intel MID platforms.
config SERIAL_PCH_UART
- tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+ tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
depends on PCI
select SERIAL_CORE
help
@@ -1568,12 +1568,12 @@ config SERIAL_PCH_UART
which is an IOH(Input/Output Hub) for x86 embedded processor.
Enabling PCH_DMA, this PCH UART works as DMA mode.
- This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
- Output Hub), ML7213 and ML7223.
- ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
- for MP(Media Phone) use.
- ML7213/ML7223 is companion chip for Intel Atom E6xx series.
- ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+ This driver also can be used for LAPIS Semiconductor IOH(Input/
+ Output Hub), ML7213, ML7223 and ML7831.
+ ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+ for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+ ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+ ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
config SERIAL_MSM_SMD
bool "Enable tty device interface for some SMD ports"
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index efdf92c3a352..0d91a540bf11 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -795,6 +795,8 @@ static struct amba_id pl010_ids[] = {
{ 0, 0 },
};
+MODULE_DEVICE_TABLE(amba, pl010_ids);
+
static struct amba_driver pl010_driver = {
.drv = {
.name = "uart-pl010",
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 00233af1acc4..6958594f2fc0 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1994,6 +1994,8 @@ static struct amba_id pl011_ids[] = {
{ 0, 0 },
};
+MODULE_DEVICE_TABLE(amba, pl011_ids);
+
static struct amba_driver pl011_driver = {
.drv = {
.name = "uart-pl011",
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 4a0f86fa1e90..4c823f341d98 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -228,7 +228,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
- if (rs485conf->flags & SER_RS485_RTS_AFTER_SEND)
+ if ((rs485conf->delay_rts_after_send) > 0)
UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
@@ -304,7 +304,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
@@ -1228,7 +1228,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
- if (atmel_port->rs485.flags & SER_RS485_RTS_AFTER_SEND)
+ if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
@@ -1447,16 +1447,6 @@ static void __devinit atmel_of_init_port(struct atmel_uart_port *atmel_port,
rs485conf->delay_rts_after_send = rs485_delay[1];
rs485conf->flags = 0;
- if (rs485conf->delay_rts_before_send == 0 &&
- rs485conf->delay_rts_after_send == 0) {
- rs485conf->flags |= SER_RS485_RTS_ON_SEND;
- } else {
- if (rs485conf->delay_rts_before_send)
- rs485conf->flags |= SER_RS485_RTS_BEFORE_SEND;
- if (rs485conf->delay_rts_after_send)
- rs485conf->flags |= SER_RS485_RTS_AFTER_SEND;
- }
-
if (of_get_property(np, "rs485-rx-during-tx", NULL))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index b7435043f2fe..1dfba7b779c8 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3234,9 +3234,8 @@ rs_write(struct tty_struct *tty,
e100_disable_rx(info);
e100_enable_rx_irq(info);
#endif
- if ((info->rs485.flags & SER_RS485_RTS_BEFORE_SEND) &&
- (info->rs485.delay_rts_before_send > 0))
- msleep(info->rs485.delay_rts_before_send);
+ if (info->rs485.delay_rts_before_send > 0)
+ msleep(info->rs485.delay_rts_before_send);
}
#endif /* CONFIG_ETRAX_RS485 */
@@ -3693,10 +3692,6 @@ rs_ioctl(struct tty_struct *tty,
rs485data.delay_rts_before_send = rs485ctrl.delay_rts_before_send;
rs485data.flags = 0;
- if (rs485data.delay_rts_before_send != 0)
- rs485data.flags |= SER_RS485_RTS_BEFORE_SEND;
- else
- rs485data.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
if (rs485ctrl.enabled)
rs485data.flags |= SER_RS485_ENABLED;
@@ -4531,7 +4526,6 @@ static int __init rs_init(void)
/* Set sane defaults */
info->rs485.flags &= ~(SER_RS485_RTS_ON_SEND);
info->rs485.flags |= SER_RS485_RTS_AFTER_SEND;
- info->rs485.flags &= ~(SER_RS485_RTS_BEFORE_SEND);
info->rs485.delay_rts_before_send = 0;
info->rs485.flags &= ~(SER_RS485_ENABLED);
#endif
diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c
index 286c386d9c46..e272d3919c67 100644
--- a/drivers/tty/serial/mfd.c
+++ b/drivers/tty/serial/mfd.c
@@ -884,7 +884,6 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
{
struct uart_hsu_port *up =
container_of(port, struct uart_hsu_port, port);
- struct tty_struct *tty = port->state->port.tty;
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
@@ -907,8 +906,7 @@ serial_hsu_set_termios(struct uart_port *port, struct ktermios *termios,
}
/* CMSPAR isn't supported by this driver */
- if (tty)
- tty->termios->c_cflag &= ~CMSPAR;
+ termios->c_cflag &= ~CMSPAR;
if (termios->c_cflag & CSTOPB)
cval |= UART_LCR_STOP;
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 21febef926aa..d6aba8c087e4 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -1,5 +1,5 @@
/*
- *Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
+ *Copyright (C) 2011 LAPIS Semiconductor Co., Ltd.
*
*This program is free software; you can redistribute it and/or modify
*it under the terms of the GNU General Public License as published by
@@ -46,8 +46,8 @@ enum {
/* Set the max number of UART port
* Intel EG20T PCH: 4 port
- * OKI SEMICONDUCTOR ML7213 IOH: 3 port
- * OKI SEMICONDUCTOR ML7223 IOH: 2 port
+ * LAPIS Semiconductor ML7213 IOH: 3 port
+ * LAPIS Semiconductor ML7223 IOH: 2 port
*/
#define PCH_UART_NR 4
@@ -258,6 +258,8 @@ enum pch_uart_num_t {
pch_ml7213_uart2,
pch_ml7223_uart0,
pch_ml7223_uart1,
+ pch_ml7831_uart0,
+ pch_ml7831_uart1,
};
static struct pch_uart_driver_data drv_dat[] = {
@@ -270,6 +272,8 @@ static struct pch_uart_driver_data drv_dat[] = {
[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+ [pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+ [pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
};
static unsigned int default_baud = 9600;
@@ -628,6 +632,7 @@ static void pch_request_dma(struct uart_port *port)
dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
__func__);
dma_release_channel(priv->chan_tx);
+ priv->chan_tx = NULL;
return;
}
@@ -1215,8 +1220,7 @@ static void pch_uart_shutdown(struct uart_port *port)
dev_err(priv->port.dev,
"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
- if (priv->use_dma_flag)
- pch_free_dma(port);
+ pch_free_dma(port);
free_irq(priv->port.irq, priv);
}
@@ -1280,6 +1284,7 @@ static void pch_uart_set_termios(struct uart_port *port,
if (rtn)
goto out;
+ pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
/* Don't rewrite B0 */
if (tty_termios_baud_rate(termios))
tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1552,6 +1557,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
.driver_data = pch_ml7223_uart0},
{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
.driver_data = pch_ml7223_uart1},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+ .driver_data = pch_ml7831_uart0},
+ {PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+ .driver_data = pch_ml7831_uart1},
{0,},
};
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 5acd24a27d08..e9c2dfe471a2 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -99,6 +99,9 @@ MODULE_LICENSE("GPL");
#define PMACZILOG_NAME "ttyPZ"
#endif
+#define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)
+#define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg)
/*
* For the sake of early serial console, we can do a pre-probe
@@ -106,7 +109,6 @@ MODULE_LICENSE("GPL");
*/
static struct uart_pmac_port pmz_ports[MAX_ZS_PORTS];
static int pmz_ports_count;
-static DEFINE_MUTEX(pmz_irq_mutex);
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
@@ -126,9 +128,6 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
{
int i;
- if (ZS_IS_ASLEEP(uap))
- return;
-
/* Let pending transmits finish. */
for (i = 0; i < 1000; i++) {
unsigned char stat = read_zsreg(uap, R1);
@@ -216,32 +215,24 @@ static void pmz_maybe_update_regs(struct uart_pmac_port *uap)
}
}
+static void pmz_interrupt_control(struct uart_pmac_port *uap, int enable)
+{
+ if (enable) {
+ uap->curregs[1] |= INT_ALL_Rx | TxINT_ENAB;
+ if (!ZS_IS_EXTCLK(uap))
+ uap->curregs[1] |= EXT_INT_ENAB;
+ } else {
+ uap->curregs[1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
+ }
+ write_zsreg(uap, R1, uap->curregs[1]);
+}
+
static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
{
struct tty_struct *tty = NULL;
unsigned char ch, r1, drop, error, flag;
int loops = 0;
- /* The interrupt can be enabled when the port isn't open, typically
- * that happens when using one port is open and the other closed (stale
- * interrupt) or when one port is used as a console.
- */
- if (!ZS_IS_OPEN(uap)) {
- pmz_debug("pmz: draining input\n");
- /* Port is closed, drain input data */
- for (;;) {
- if ((++loops) > 1000)
- goto flood;
- (void)read_zsreg(uap, R1);
- write_zsreg(uap, R0, ERR_RES);
- (void)read_zsdata(uap);
- ch = read_zsreg(uap, R0);
- if (!(ch & Rx_CH_AV))
- break;
- }
- return NULL;
- }
-
/* Sanity check, make sure the old bug is no longer happening */
if (uap->port.state == NULL || uap->port.state->port.tty == NULL) {
WARN_ON(1);
@@ -339,9 +330,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
return tty;
flood:
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
- zssync(uap);
+ pmz_interrupt_control(uap, 0);
pmz_error("pmz: rx irq flood !\n");
return tty;
}
@@ -383,8 +372,6 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
{
struct circ_buf *xmit;
- if (ZS_IS_ASLEEP(uap))
- return;
if (ZS_IS_CONS(uap)) {
unsigned char status = read_zsreg(uap, R0);
@@ -481,6 +468,10 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
/* Channel A */
tty = NULL;
if (r3 & (CHAEXT | CHATxIP | CHARxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanA interrupt while open !\n");
+ goto skip_a;
+ }
write_zsreg(uap_a, R0, RES_H_IUS);
zssync(uap_a);
if (r3 & CHAEXT)
@@ -491,16 +482,21 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_a);
rc = IRQ_HANDLED;
}
+ skip_a:
spin_unlock(&uap_a->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
- if (uap_b->node == NULL)
+ if (!uap_b)
goto out;
spin_lock(&uap_b->port.lock);
tty = NULL;
if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) {
+ if (!ZS_IS_OPEN(uap_a)) {
+ pmz_debug("ChanB interrupt while open !\n");
+ goto skip_b;
+ }
write_zsreg(uap_b, R0, RES_H_IUS);
zssync(uap_b);
if (r3 & CHBEXT)
@@ -511,14 +507,12 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
pmz_transmit_chars(uap_b);
rc = IRQ_HANDLED;
}
+ skip_b:
spin_unlock(&uap_b->port.lock);
if (tty != NULL)
tty_flip_buffer_push(tty);
out:
-#ifdef DEBUG_HARD
- pmz_debug("irq done.\n");
-#endif
return rc;
}
@@ -543,12 +537,8 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
*/
static unsigned int pmz_tx_empty(struct uart_port *port)
{
- struct uart_pmac_port *uap = to_pmz(port);
unsigned char status;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return TIOCSER_TEMT;
-
status = pmz_peek_status(to_pmz(port));
if (status & Tx_BUF_EMP)
return TIOCSER_TEMT;
@@ -570,8 +560,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
if (ZS_IS_IRDA(uap))
return;
/* We get called during boot with a port not up yet */
- if (ZS_IS_ASLEEP(uap) ||
- !(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
+ if (!(ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)))
return;
set_bits = clear_bits = 0;
@@ -590,8 +579,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
/* NOTE: Not subject to 'transmitter active' rule. */
uap->curregs[R5] |= set_bits;
uap->curregs[R5] &= ~clear_bits;
- if (ZS_IS_ASLEEP(uap))
- return;
+
write_zsreg(uap, R5, uap->curregs[R5]);
pmz_debug("pmz_set_mctrl: set bits: %x, clear bits: %x -> %x\n",
set_bits, clear_bits, uap->curregs[R5]);
@@ -609,9 +597,6 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
unsigned char status;
unsigned int ret;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return 0;
-
status = read_zsreg(uap, R0);
ret = 0;
@@ -649,9 +634,6 @@ static void pmz_start_tx(struct uart_port *port)
uap->flags |= PMACZILOG_FLAG_TX_ACTIVE;
uap->flags &= ~PMACZILOG_FLAG_TX_STOPPED;
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
status = read_zsreg(uap, R0);
/* TX busy? Just wait for the TX done interrupt. */
@@ -690,9 +672,6 @@ static void pmz_stop_rx(struct uart_port *port)
{
struct uart_pmac_port *uap = to_pmz(port);
- if (ZS_IS_ASLEEP(uap) || uap->node == NULL)
- return;
-
pmz_debug("pmz: stop_rx()()\n");
/* Disable all RX interrupts. */
@@ -711,14 +690,12 @@ static void pmz_enable_ms(struct uart_port *port)
struct uart_pmac_port *uap = to_pmz(port);
unsigned char new_reg;
- if (ZS_IS_IRDA(uap) || uap->node == NULL)
+ if (ZS_IS_IRDA(uap))
return;
new_reg = uap->curregs[R15] | (DCDIE | SYNCIE | CTSIE);
if (new_reg != uap->curregs[R15]) {
uap->curregs[R15] = new_reg;
- if (ZS_IS_ASLEEP(uap))
- return;
/* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(uap, R15, uap->curregs[R15]);
}
@@ -734,8 +711,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
unsigned char set_bits, clear_bits, new_reg;
unsigned long flags;
- if (uap->node == NULL)
- return;
set_bits = clear_bits = 0;
if (break_state)
@@ -748,12 +723,6 @@ static void pmz_break_ctl(struct uart_port *port, int break_state)
new_reg = (uap->curregs[R5] | set_bits) & ~clear_bits;
if (new_reg != uap->curregs[R5]) {
uap->curregs[R5] = new_reg;
-
- /* NOTE: Not subject to 'transmitter active' rule. */
- if (ZS_IS_ASLEEP(uap)) {
- spin_unlock_irqrestore(&port->lock, flags);
- return;
- }
write_zsreg(uap, R5, uap->curregs[R5]);
}
@@ -927,14 +896,21 @@ static int __pmz_startup(struct uart_pmac_port *uap)
static void pmz_irda_reset(struct uart_pmac_port *uap)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] |= DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(110);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(110);
+
+ spin_lock_irqsave(&uap->port.lock, flags);
uap->curregs[R5] &= ~DTR;
write_zsreg(uap, R5, uap->curregs[R5]);
zssync(uap);
- mdelay(10);
+ spin_unlock_irqrestore(&uap->port.lock, flags);
+ msleep(10);
}
/*
@@ -949,13 +925,6 @@ static int pmz_startup(struct uart_port *port)
pmz_debug("pmz: startup()\n");
- if (ZS_IS_ASLEEP(uap))
- return -EAGAIN;
- if (uap->node == NULL)
- return -ENODEV;
-
- mutex_lock(&pmz_irq_mutex);
-
uap->flags |= PMACZILOG_FLAG_IS_OPEN;
/* A console is never powered down. Else, power up and
@@ -966,18 +935,14 @@ static int pmz_startup(struct uart_port *port)
pwr_delay = __pmz_startup(uap);
spin_unlock_irqrestore(&port->lock, flags);
}
-
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
+ sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
- "SCC", uap)) {
+ uap->irq_name, uap)) {
pmz_error("Unable to register zs interrupt handler.\n");
pmz_set_scc_power(uap, 0);
- mutex_unlock(&pmz_irq_mutex);
return -ENXIO;
}
- mutex_unlock(&pmz_irq_mutex);
-
/* Right now, we deal with delay by blocking here, I'll be
* smarter later on
*/
@@ -990,12 +955,9 @@ static int pmz_startup(struct uart_port *port)
if (ZS_IS_IRDA(uap))
pmz_irda_reset(uap);
- /* Enable interrupts emission from the chip */
+ /* Enable interrupt requests for the channel */
spin_lock_irqsave(&port->lock, flags);
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
+ pmz_interrupt_control(uap, 1);
spin_unlock_irqrestore(&port->lock, flags);
pmz_debug("pmz: startup() done.\n");
@@ -1010,49 +972,35 @@ static void pmz_shutdown(struct uart_port *port)
pmz_debug("pmz: shutdown()\n");
- if (uap->node == NULL)
- return;
-
- mutex_lock(&pmz_irq_mutex);
-
- /* Release interrupt handler */
- free_irq(uap->port.irq, uap);
-
spin_lock_irqsave(&port->lock, flags);
- uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
+ /* Disable interrupt requests for the channel */
+ pmz_interrupt_control(uap, 0);
- if (!ZS_IS_OPEN(uap->mate))
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
+ if (!ZS_IS_CONS(uap)) {
+ /* Disable receiver and transmitter */
+ uap->curregs[R3] &= ~RxENABLE;
+ uap->curregs[R5] &= ~TxENABLE;
- /* Disable interrupts */
- if (!ZS_IS_ASLEEP(uap)) {
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
- zssync(uap);
+ /* Disable break assertion */
+ uap->curregs[R5] &= ~SND_BRK;
+ pmz_maybe_update_regs(uap);
}
- if (ZS_IS_CONS(uap) || ZS_IS_ASLEEP(uap)) {
- spin_unlock_irqrestore(&port->lock, flags);
- mutex_unlock(&pmz_irq_mutex);
- return;
- }
+ spin_unlock_irqrestore(&port->lock, flags);
+
+ /* Release interrupt handler */
+ free_irq(uap->port.irq, uap);
- /* Disable receiver and transmitter. */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
+ spin_lock_irqsave(&port->lock, flags);
- /* Disable all interrupts and BRK assertion. */
- uap->curregs[R5] &= ~SND_BRK;
- pmz_maybe_update_regs(uap);
+ uap->flags &= ~PMACZILOG_FLAG_IS_OPEN;
- /* Shut the chip down */
- pmz_set_scc_power(uap, 0);
+ if (!ZS_IS_CONS(uap))
+ pmz_set_scc_power(uap, 0); /* Shut the chip down */
spin_unlock_irqrestore(&port->lock, flags);
- mutex_unlock(&pmz_irq_mutex);
-
pmz_debug("pmz: shutdown() done.\n");
}
@@ -1300,9 +1248,6 @@ static void __pmz_set_termios(struct uart_port *port, struct ktermios *termios,
pmz_debug("pmz: set_termios()\n");
- if (ZS_IS_ASLEEP(uap))
- return;
-
memcpy(&uap->termios_cache, termios, sizeof(struct ktermios));
/* XXX Check which revs of machines actually allow 1 and 4Mb speeds
@@ -1352,19 +1297,15 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
spin_lock_irqsave(&port->lock, flags);
/* Disable IRQs on the port */
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- write_zsreg(uap, R1, uap->curregs[R1]);
+ pmz_interrupt_control(uap, 0);
/* Setup new port configuration */
__pmz_set_termios(port, termios, old);
/* Re-enable IRQs on the port */
- if (ZS_IS_OPEN(uap)) {
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
- }
+ if (ZS_IS_OPEN(uap))
+ pmz_interrupt_control(uap, 1);
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -1604,25 +1545,34 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
*/
static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
+ struct uart_pmac_port *uap;
int i;
/* Iterate the pmz_ports array to find a matching entry
*/
for (i = 0; i < MAX_ZS_PORTS; i++)
- if (pmz_ports[i].node == mdev->ofdev.dev.of_node) {
- struct uart_pmac_port *uap = &pmz_ports[i];
-
- uap->dev = mdev;
- dev_set_drvdata(&mdev->ofdev.dev, uap);
- if (macio_request_resources(uap->dev, "pmac_zilog"))
- printk(KERN_WARNING "%s: Failed to request resource"
- ", port still active\n",
- uap->node->name);
- else
- uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
- return 0;
- }
- return -ENODEV;
+ if (pmz_ports[i].node == mdev->ofdev.dev.of_node)
+ break;
+ if (i >= MAX_ZS_PORTS)
+ return -ENODEV;
+
+
+ uap = &pmz_ports[i];
+ uap->dev = mdev;
+ uap->port.dev = &mdev->ofdev.dev;
+ dev_set_drvdata(&mdev->ofdev.dev, uap);
+
+ /* We still activate the port even when failing to request resources
+ * to work around bugs in ancient Apple device-trees
+ */
+ if (macio_request_resources(uap->dev, "pmac_zilog"))
+ printk(KERN_WARNING "%s: Failed to request resource"
+ ", port still active\n",
+ uap->node->name);
+ else
+ uap->flags |= PMACZILOG_FLAG_RSRC_REQUESTED;
+
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
/*
@@ -1636,12 +1586,15 @@ static int pmz_detach(struct macio_dev *mdev)
if (!uap)
return -ENODEV;
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
if (uap->flags & PMACZILOG_FLAG_RSRC_REQUESTED) {
macio_release_resources(uap->dev);
uap->flags &= ~PMACZILOG_FLAG_RSRC_REQUESTED;
}
dev_set_drvdata(&mdev->ofdev.dev, NULL);
uap->dev = NULL;
+ uap->port.dev = NULL;
return 0;
}
@@ -1650,59 +1603,13 @@ static int pmz_detach(struct macio_dev *mdev)
static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
if (uap == NULL) {
printk("HRM... pmz_suspend with NULL uap\n");
return 0;
}
- if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
- return 0;
-
- pmz_debug("suspend, switching to state %d\n", pm_state.event);
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_CONS(uap)) {
- /* Disable receiver and transmitter. */
- uap->curregs[R3] &= ~RxENABLE;
- uap->curregs[R5] &= ~TxENABLE;
-
- /* Disable all interrupts and BRK assertion. */
- uap->curregs[R1] &= ~(EXT_INT_ENAB | TxINT_ENAB | RxINT_MASK);
- uap->curregs[R5] &= ~SND_BRK;
- pmz_load_zsregs(uap, uap->curregs);
- uap->flags |= PMACZILOG_FLAG_IS_ASLEEP;
- mb();
- }
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_OPEN(uap) || ZS_IS_OPEN(uap->mate))
- if (ZS_IS_ASLEEP(uap->mate) && ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags &= ~PMACZILOG_FLAG_IS_IRQ_ON;
- disable_irq(uap->port.irq);
- }
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags &= ~CON_ENABLED;
-
- /* Shut the chip down */
- pmz_set_scc_power(uap, 0);
-
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- pmz_debug("suspend, switching complete\n");
-
- mdev->ofdev.dev.power.power_state = pm_state;
+ uart_suspend_port(&pmz_uart_reg, &uap->port);
return 0;
}
@@ -1711,76 +1618,20 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
static int pmz_resume(struct macio_dev *mdev)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
- struct uart_state *state;
- unsigned long flags;
- int pwr_delay = 0;
if (uap == NULL)
return 0;
- if (mdev->ofdev.dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
- pmz_debug("resume, switching to state 0\n");
-
- state = pmz_uart_reg.state + uap->port.line;
-
- mutex_lock(&pmz_irq_mutex);
- mutex_lock(&state->port.mutex);
-
- spin_lock_irqsave(&uap->port.lock, flags);
- if (!ZS_IS_OPEN(uap) && !ZS_IS_CONS(uap)) {
- spin_unlock_irqrestore(&uap->port.lock, flags);
- goto bail;
- }
- pwr_delay = __pmz_startup(uap);
-
- /* Take care of config that may have changed while asleep */
- __pmz_set_termios(&uap->port, &uap->termios_cache, NULL);
-
- if (ZS_IS_OPEN(uap)) {
- /* Enable interrupts */
- uap->curregs[R1] |= INT_ALL_Rx | TxINT_ENAB;
- if (!ZS_IS_EXTCLK(uap))
- uap->curregs[R1] |= EXT_INT_ENAB;
- write_zsreg(uap, R1, uap->curregs[R1]);
- }
-
- spin_unlock_irqrestore(&uap->port.lock, flags);
-
- if (ZS_IS_CONS(uap))
- uap->port.cons->flags |= CON_ENABLED;
-
- /* Re-enable IRQ on the controller */
- if (ZS_IS_OPEN(uap) && !ZS_IS_IRQ_ON(pmz_get_port_A(uap))) {
- pmz_get_port_A(uap)->flags |= PMACZILOG_FLAG_IS_IRQ_ON;
- enable_irq(uap->port.irq);
- }
-
- bail:
- mutex_unlock(&state->port.mutex);
- mutex_unlock(&pmz_irq_mutex);
-
- /* Right now, we deal with delay by blocking here, I'll be
- * smarter later on
- */
- if (pwr_delay != 0) {
- pmz_debug("pmz: delaying %d ms\n", pwr_delay);
- msleep(pwr_delay);
- }
-
- pmz_debug("resume, switching complete\n");
-
- mdev->ofdev.dev.power.power_state.event = PM_EVENT_ON;
+ uart_resume_port(&pmz_uart_reg, &uap->port);
return 0;
}
/*
* Probe all ports in the system and build the ports array, we register
- * with the serial layer at this point, the macio-type probing is only
- * used later to "attach" to the sysfs tree so we get power management
- * events
+ * with the serial layer later, so we get a proper struct device which
+ * allows the tty to attach properly. This is later than it used to be
+ * but the tty layer really wants it that way.
*/
static int __init pmz_probe(void)
{
@@ -1816,8 +1667,10 @@ static int __init pmz_probe(void)
/*
* Fill basic fields in the port structures
*/
- pmz_ports[count].mate = &pmz_ports[count+1];
- pmz_ports[count+1].mate = &pmz_ports[count];
+ if (node_b != NULL) {
+ pmz_ports[count].mate = &pmz_ports[count+1];
+ pmz_ports[count+1].mate = &pmz_ports[count];
+ }
pmz_ports[count].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
pmz_ports[count].node = node_a;
pmz_ports[count+1].node = node_b;
@@ -1855,8 +1708,8 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
struct resource *r_ports;
int irq;
- r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
- irq = platform_get_irq(uap->node, 0);
+ r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->pdev, 0);
if (!r_ports || !irq)
return -ENODEV;
@@ -1885,19 +1738,19 @@ static int __init pmz_probe(void)
pmz_ports_count = 0;
- pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[0].port.line = 0;
pmz_ports[0].flags = PMACZILOG_FLAG_IS_CHANNEL_A;
- pmz_ports[0].node = &scc_a_pdev;
+ pmz_ports[0].pdev = &scc_a_pdev;
err = pmz_init_port(&pmz_ports[0]);
if (err)
return err;
pmz_ports_count++;
+ pmz_ports[0].mate = &pmz_ports[1];
pmz_ports[1].mate = &pmz_ports[0];
pmz_ports[1].port.line = 1;
pmz_ports[1].flags = 0;
- pmz_ports[1].node = &scc_b_pdev;
+ pmz_ports[1].pdev = &scc_b_pdev;
err = pmz_init_port(&pmz_ports[1]);
if (err)
return err;
@@ -1913,16 +1766,35 @@ static void pmz_dispose_port(struct uart_pmac_port *uap)
static int __init pmz_attach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap;
int i;
+ /* Iterate the pmz_ports array to find a matching entry */
for (i = 0; i < pmz_ports_count; i++)
- if (pmz_ports[i].node == pdev)
- return 0;
- return -ENODEV;
+ if (pmz_ports[i].pdev == pdev)
+ break;
+ if (i >= pmz_ports_count)
+ return -ENODEV;
+
+ uap = &pmz_ports[i];
+ uap->port.dev = &pdev->dev;
+ platform_set_drvdata(pdev, uap);
+
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
static int __exit pmz_detach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap = platform_get_drvdata(pdev);
+
+ if (!uap)
+ return -ENODEV;
+
+ uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
+ platform_set_drvdata(pdev, NULL);
+ uap->port.dev = NULL;
+
return 0;
}
@@ -1954,38 +1826,13 @@ static struct console pmz_console = {
*/
static int __init pmz_register(void)
{
- int i, rc;
-
pmz_uart_reg.nr = pmz_ports_count;
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
/*
* Register this driver with the serial core
*/
- rc = uart_register_driver(&pmz_uart_reg);
- if (rc)
- return rc;
-
- /*
- * Register each port with the serial core
- */
- for (i = 0; i < pmz_ports_count; i++) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- /* NULL node may happen on wallstreet */
- if (uport->node != NULL)
- rc = uart_add_one_port(&pmz_uart_reg, &uport->port);
- if (rc)
- goto err_out;
- }
-
- return 0;
-err_out:
- while (i-- > 0) {
- struct uart_pmac_port *uport = &pmz_ports[i];
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
- }
- uart_unregister_driver(&pmz_uart_reg);
- return rc;
+ return uart_register_driver(&pmz_uart_reg);
}
#ifdef CONFIG_PPC_PMAC
@@ -2084,10 +1931,13 @@ static void __exit exit_pmz(void)
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
- if (uport->node != NULL) {
- uart_remove_one_port(&pmz_uart_reg, &uport->port);
+#ifdef CONFIG_PPC_PMAC
+ if (uport->node != NULL)
pmz_dispose_port(uport);
- }
+#else
+ if (uport->pdev != NULL)
+ pmz_dispose_port(uport);
+#endif
}
/* Unregister UART driver */
uart_unregister_driver(&pmz_uart_reg);
@@ -2114,8 +1964,6 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
struct uart_pmac_port *uap = &pmz_ports[con->index];
unsigned long flags;
- if (ZS_IS_ASLEEP(uap))
- return;
spin_lock_irqsave(&uap->port.lock, flags);
/* Turn of interrupts and enable the transmitter. */
@@ -2160,8 +2008,13 @@ static int __init pmz_console_setup(struct console *co, char *options)
if (co->index >= pmz_ports_count)
co->index = 0;
uap = &pmz_ports[co->index];
+#ifdef CONFIG_PPC_PMAC
if (uap->node == NULL)
return -ENODEV;
+#else
+ if (uap->pdev == NULL)
+ return -ENODEV;
+#endif
port = &uap->port;
/*
diff --git a/drivers/tty/serial/pmac_zilog.h b/drivers/tty/serial/pmac_zilog.h
index cbc34fbb1b20..3483242ee3e0 100644
--- a/drivers/tty/serial/pmac_zilog.h
+++ b/drivers/tty/serial/pmac_zilog.h
@@ -1,16 +1,6 @@
#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__
-#ifdef CONFIG_PPC_PMAC
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->dev->ofdev.dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->dev->ofdev.dev, fmt, ## arg)
-#else
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg)
-#endif
-
/*
* At most 2 ESCCs with 2 ports each
*/
@@ -35,7 +25,7 @@ struct uart_pmac_port {
*/
struct device_node *node;
#else
- struct platform_device *node;
+ struct platform_device *pdev;
#endif
/* Port type as obtained from device tree (IRDA, modem, ...) */
@@ -50,14 +40,11 @@ struct uart_pmac_port {
#define PMACZILOG_FLAG_REGS_HELD 0x00000010
#define PMACZILOG_FLAG_TX_STOPPED 0x00000020
#define PMACZILOG_FLAG_TX_ACTIVE 0x00000040
-#define PMACZILOG_FLAG_ENABLED 0x00000080
#define PMACZILOG_FLAG_IS_IRDA 0x00000100
#define PMACZILOG_FLAG_IS_INTMODEM 0x00000200
#define PMACZILOG_FLAG_HAS_DMA 0x00000400
#define PMACZILOG_FLAG_RSRC_REQUESTED 0x00000800
-#define PMACZILOG_FLAG_IS_ASLEEP 0x00001000
#define PMACZILOG_FLAG_IS_OPEN 0x00002000
-#define PMACZILOG_FLAG_IS_IRQ_ON 0x00004000
#define PMACZILOG_FLAG_IS_EXTCLK 0x00008000
#define PMACZILOG_FLAG_BREAK 0x00010000
@@ -74,6 +61,8 @@ struct uart_pmac_port {
volatile struct dbdma_regs __iomem *rx_dma_regs;
#endif
+ unsigned char irq_name[8];
+
struct ktermios termios_cache;
};
@@ -388,9 +377,7 @@ static inline void zssync(struct uart_pmac_port *port)
#define ZS_IS_IRDA(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRDA)
#define ZS_IS_INTMODEM(UP) ((UP)->flags & PMACZILOG_FLAG_IS_INTMODEM)
#define ZS_HAS_DMA(UP) ((UP)->flags & PMACZILOG_FLAG_HAS_DMA)
-#define ZS_IS_ASLEEP(UP) ((UP)->flags & PMACZILOG_FLAG_IS_ASLEEP)
#define ZS_IS_OPEN(UP) ((UP)->flags & PMACZILOG_FLAG_IS_OPEN)
-#define ZS_IS_IRQ_ON(UP) ((UP)->flags & PMACZILOG_FLAG_IS_IRQ_ON)
#define ZS_IS_EXTCLK(UP) ((UP)->flags & PMACZILOG_FLAG_IS_EXTCLK)
#endif /* __PMAC_ZILOG_H__ */
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 1945c70539c2..aff9d612dff0 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -207,6 +207,25 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
},
/*
+ * Common SH-2(A) SCIF definitions for ports with FIFO data
+ * count registers.
+ */
+ [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCTFDR] = sci_reg_invalid,
+ [SCRFDR] = sci_reg_invalid,
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
+ },
+
+ /*
* Common SH-3 SCIF definitions.
*/
[SCIx_SH3_SCIF_REGTYPE] = {
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index cea8918b8233..2ebe606a2db1 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -963,6 +963,9 @@ static void qe_uart_set_termios(struct uart_port *port,
/* Do we really need a spinlock here? */
spin_lock_irqsave(&port->lock, flags);
+ /* Update the per-port timeout. */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
out_be16(&uccp->upsmr, upsmr);
if (soft_uart) {
out_be16(&uccup->supsmr, supsmr);
diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c
index 43db715f1502..7867b7c4538e 100644
--- a/drivers/tty/sysrq.c
+++ b/drivers/tty/sysrq.c
@@ -32,7 +32,6 @@
#include <linux/module.h>
#include <linux/suspend.h>
#include <linux/writeback.h>
-#include <linux/buffer_head.h> /* for fsync_bdev() */
#include <linux/swap.h>
#include <linux/spinlock.h>
#include <linux/vt_kern.h>
@@ -41,6 +40,7 @@
#include <linux/oom.h>
#include <linux/slab.h>
#include <linux/input.h>
+#include <linux/uaccess.h>
#include <asm/ptrace.h>
#include <asm/irq_regs.h>
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 05085beb83db..3fdebd306b94 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -3267,7 +3267,7 @@ void __init console_init(void)
}
}
-static char *tty_devnode(struct device *dev, mode_t *mode)
+static char *tty_devnode(struct device *dev, umode_t *mode)
{
if (!mode)
return NULL;
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index 512c49f98e85..8e0924f55446 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -36,6 +36,7 @@
#include <linux/kmod.h>
#include <linux/nsproxy.h>
+#include <linux/ratelimit.h>
/*
* This guards the refcounted line discipline lists. The lock
@@ -547,15 +548,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
/**
* tty_ldisc_wait_idle - wait for the ldisc to become idle
* @tty: tty to wait for
+ * @timeout: for how long to wait at most
*
* Wait for the line discipline to become idle. The discipline must
* have been halted for this to guarantee it remains idle.
*/
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
{
- int ret;
+ long ret;
ret = wait_event_timeout(tty_ldisc_idle,
- atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+ atomic_read(&tty->ldisc->users) == 1, timeout);
if (ret < 0)
return ret;
return ret > 0 ? 0 : -EBUSY;
@@ -665,7 +667,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
tty_ldisc_flush_works(tty);
- retval = tty_ldisc_wait_idle(tty);
+ retval = tty_ldisc_wait_idle(tty, 5 * HZ);
tty_lock();
mutex_lock(&tty->ldisc_mutex);
@@ -762,8 +764,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
if (IS_ERR(ld))
return -1;
- WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
tty_ldisc_close(tty, tty->ldisc);
tty_ldisc_put(tty->ldisc);
tty->ldisc = NULL;
@@ -838,7 +838,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
tty_unlock();
cancel_work_sync(&tty->buf.work);
mutex_unlock(&tty->ldisc_mutex);
-
+retry:
tty_lock();
mutex_lock(&tty->ldisc_mutex);
@@ -847,6 +847,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
it means auditing a lot of other paths so this is
a FIXME */
if (tty->ldisc) { /* Not yet closed */
+ if (atomic_read(&tty->ldisc->users) != 1) {
+ char cur_n[TASK_COMM_LEN], tty_n[64];
+ long timeout = 3 * HZ;
+ tty_unlock();
+
+ while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+ timeout = MAX_SCHEDULE_TIMEOUT;
+ printk_ratelimited(KERN_WARNING
+ "%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+ __func__, get_task_comm(cur_n, current),
+ tty_name(tty, tty_n));
+ }
+ mutex_unlock(&tty->ldisc_mutex);
+ goto retry;
+ }
+
if (reset == 0) {
if (!tty_ldisc_reinit(tty, tty->termios->c_line))
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 13:00:27 +0000