diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 21 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/earlycon.c | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_core.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 2 |
6 files changed, 26 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 54adf8d56350..a93f77ab3da0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -3387,11 +3387,9 @@ static int serial_pci_is_class_communication(struct pci_dev *dev) /* * If it is not a communications device or the programming * interface is greater than 6, give up. - * - * (Should we try to make guesses for multiport serial devices - * later?) */ if ((((dev->class >> 8) != PCI_CLASS_COMMUNICATION_SERIAL) && + ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MULTISERIAL) && ((dev->class >> 8) != PCI_CLASS_COMMUNICATION_MODEM)) || (dev->class & 0xff) > 6) return -ENODEV; @@ -3428,6 +3426,12 @@ serial_pci_guess_board(struct pci_dev *dev, struct pciserial_board *board) { int num_iomem, num_port, first_port = -1, i; + /* + * Should we try to make guesses for multiport serial devices later? + */ + if ((dev->class >> 8) == PCI_CLASS_COMMUNICATION_MULTISERIAL) + return -ENODEV; + num_iomem = num_port = 0; for (i = 0; i < PCI_NUM_BAR_RESOURCES; i++) { if (pci_resource_flags(dev, i) & IORESOURCE_IO) { @@ -4699,6 +4703,17 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ pbn_b2_4_115200 }, /* + * BrainBoxes UC-260 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D21, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0E34, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index df46a9e88c34..e287fe8f10fc 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1734,6 +1734,7 @@ static void atmel_get_ip_name(struct uart_port *port) switch (version) { case 0x302: case 0x10213: + case 0x10302: dev_dbg(port->dev, "This version is usart\n"); atmel_port->has_frac_baudrate = true; atmel_port->has_hw_timer = true; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 870e84fb6e39..a24278380fec 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -245,11 +245,12 @@ int __init of_setup_earlycon(const struct earlycon_id *match, } port->mapbase = addr; port->uartclk = BASE_BAUD * 16; - port->membase = earlycon_map(port->mapbase, SZ_4K); val = of_get_flat_dt_prop(node, "reg-offset", NULL); if (val) port->mapbase += be32_to_cpu(*val); + port->membase = earlycon_map(port->mapbase, SZ_4K); + val = of_get_flat_dt_prop(node, "reg-shift", NULL); if (val) port->regshift = be32_to_cpu(*val); diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 1d7ca382bc12..a33c685af990 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2093,7 +2093,7 @@ static int serial_imx_probe(struct platform_device *pdev) uart_get_rs485_mode(&pdev->dev, &sport->port.rs485); if (sport->port.rs485.flags & SER_RS485_ENABLED && - (!sport->have_rtscts || !sport->have_rtsgpio)) + (!sport->have_rtscts && !sport->have_rtsgpio)) dev_err(&pdev->dev, "no RTS control, disabling rs485\n"); imx_rs485_config(&sport->port, &sport->port.rs485); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c8dde56b532b..35b9201db3b4 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1144,6 +1144,8 @@ static int uart_do_autoconfig(struct tty_struct *tty,struct uart_state *state) uport->ops->config_port(uport, flags); ret = uart_startup(tty, state, 1); + if (ret == 0) + tty_port_set_initialized(port, true); if (ret > 0) ret = 0; } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 7257c078e155..44adf9db38f8 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -885,6 +885,8 @@ static void sci_receive_chars(struct uart_port *port) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tport); } else { + /* TTY buffers full; read from RX reg to prevent lockup */ + serial_port_in(port, SCxRDR); serial_port_in(port, SCxSR); /* dummy read */ sci_clear_SCxSR(port, SCxSR_RDxF_CLEAR(port)); } |