summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250.c9
-rw-r--r--drivers/tty/serial/8250/8250.h36
-rw-r--r--drivers/tty/serial/8250/8250_early.c2
-rw-r--r--drivers/tty/serial/8250/8250_hp300.c20
-rw-r--r--drivers/tty/serial/Kconfig4
-rw-r--r--drivers/tty/serial/samsung.c16
-rw-r--r--drivers/tty/serial/sccnxp.c1
-rw-r--r--drivers/tty/serial/sh-sci.c3
8 files changed, 63 insertions, 28 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234592bc..5ccbd90540cf 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2349,16 +2349,14 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
serial_port_out(port, UART_EFR, efr);
}
-#ifdef CONFIG_ARCH_OMAP1
/* Workaround to enable 115200 baud on OMAP1510 internal ports */
- if (cpu_is_omap1510() && is_omap_port(up)) {
+ if (is_omap1510_8250(up)) {
if (baud == 115200) {
quot = 1;
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
} else
serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
}
-#endif
/*
* For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2437,9 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
- if (is_omap_port(pt))
+ if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;
-#endif
+
return 8 << pt->port.regshift;
}
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c8d36b..3b4ea84898c2 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@ static inline int serial8250_pnp_init(void) { return 0; }
static inline void serial8250_pnp_exit(void) { }
#endif
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ int res;
+
+ switch (pt->port.mapbase) {
+ case OMAP1_UART1_BASE:
+ case OMAP1_UART2_BASE:
+ case OMAP1_UART3_BASE:
+ res = 1;
+ break;
+ default:
+ res = 0;
+ break;
+ }
+
+ return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ if (!cpu_is_omap1510())
+ return 0;
+
+ return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+ return 0;
+}
+#endif
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index eaafb98debed..843a150ba105 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -140,7 +140,7 @@ static void __init init_port(struct early_serial8250_device *device)
serial_out(port, UART_FCR, 0); /* no fifo */
serial_out(port, UART_MCR, 0x3); /* DTR + RTS */
- divisor = port->uartclk / (16 * device->baud);
+ divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
c = serial_in(port, UART_LCR);
serial_out(port, UART_LCR, c | UART_LCR_DLAB);
serial_out(port, UART_DLL, divisor & 0xff);
diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c
index 8f1dd2cc00a8..f3d0edf46644 100644
--- a/drivers/tty/serial/8250/8250_hp300.c
+++ b/drivers/tty/serial/8250/8250_hp300.c
@@ -162,7 +162,7 @@ int __init hp300_setup_serial_console(void)
static int __devinit hpdca_init_one(struct dio_dev *d,
const struct dio_device_id *ent)
{
- struct uart_port port;
+ struct uart_8250_port uart;
int line;
#ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -174,19 +174,19 @@ static int __devinit hpdca_init_one(struct dio_dev *d,
memset(&uart, 0, sizeof(uart));
/* Memory mapped I/O */
- port.iotype = UPIO_MEM;
- port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
- port.irq = d->ipl;
- port.uartclk = HPDCA_BAUD_BASE * 16;
- port.mapbase = (d->resource.start + UART_OFFSET);
- port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
- port.regshift = 1;
- port.dev = &d->dev;
+ uart.port.iotype = UPIO_MEM;
+ uart.port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
+ uart.port.irq = d->ipl;
+ uart.port.uartclk = HPDCA_BAUD_BASE * 16;
+ uart.port.mapbase = (d->resource.start + UART_OFFSET);
+ uart.port.membase = (char *)(uart.port.mapbase + DIO_VIRADDRBASE);
+ uart.port.regshift = 1;
+ uart.port.dev = &d->dev;
line = serial8250_register_8250_port(&uart);
if (line < 0) {
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
- " irq %d failed\n", d->scode, port.irq);
+ " irq %d failed\n", d->scode, uart.port.irq);
return -ENOMEM;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 233fbaaf2559..2a53be5f010d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1150,7 +1150,7 @@ config SERIAL_SC26XX_CONSOLE
Support for Console on SC2681/SC2692 serial ports.
config SERIAL_SCCNXP
- bool "SCCNXP serial port support"
+ tristate "SCCNXP serial port support"
depends on !SERIAL_SC26XX
select SERIAL_CORE
default n
@@ -1162,7 +1162,7 @@ config SERIAL_SCCNXP
config SERIAL_SCCNXP_CONSOLE
bool "Console on SCCNXP serial port"
- depends on SERIAL_SCCNXP
+ depends on SERIAL_SCCNXP=y
select SERIAL_CORE_CONSOLE
help
Support for console on SCCNXP serial ports.
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7f04717176aa..740458ca62cc 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -530,16 +530,16 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level,
switch (level) {
case 3:
if (!IS_ERR(ourport->baudclk))
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
break;
case 0:
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
if (!IS_ERR(ourport->baudclk))
- clk_enable(ourport->baudclk);
+ clk_prepare_enable(ourport->baudclk);
break;
default:
@@ -713,11 +713,11 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
s3c24xx_serial_setsource(port, clk_sel);
if (!IS_ERR(ourport->baudclk)) {
- clk_disable(ourport->baudclk);
+ clk_disable_unprepare(ourport->baudclk);
ourport->baudclk = ERR_PTR(-EINVAL);
}
- clk_enable(clk);
+ clk_prepare_enable(clk);
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
@@ -1287,9 +1287,9 @@ static int s3c24xx_serial_resume(struct device *dev)
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (port) {
- clk_enable(ourport->clk);
+ clk_prepare_enable(ourport->clk);
s3c24xx_serial_resetport(port, s3c24xx_port_to_cfg(port));
- clk_disable(ourport->clk);
+ clk_disable_unprepare(ourport->clk);
uart_resume_port(&s3c24xx_uart_drv, port);
}
diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c
index b7086d004f5f..e821068cd95b 100644
--- a/drivers/tty/serial/sccnxp.c
+++ b/drivers/tty/serial/sccnxp.c
@@ -971,6 +971,7 @@ static const struct platform_device_id sccnxp_id_table[] = {
{ "sc28202", SCCNXP_TYPE_SC28202 },
{ "sc68681", SCCNXP_TYPE_SC68681 },
{ "sc68692", SCCNXP_TYPE_SC68692 },
+ { },
};
MODULE_DEVICE_TABLE(platform, sccnxp_id_table);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9be296cf7295..6ee59001d61d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -530,7 +530,8 @@ static inline int sci_rxd_in(struct uart_port *port)
if (s->cfg->port_reg <= 0)
return 1;
- return !!__raw_readb(s->cfg->port_reg);
+ /* Cast for ARM damage */
+ return !!__raw_readb((void __iomem *)s->cfg->port_reg);
}
/* ********************************************************************** *
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-24 12:01:45 +0000