1 files changed, 61 insertions, 11 deletions

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 2ec57b2fb278..5ea6ec3442e6 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -47,6 +47,7 @@
 #include <linux/ctype.h>
 #include <linux/err.h>
 #include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 
@@ -95,6 +96,12 @@ struct sci_port {
 #endif
 
 	struct notifier_block		freq_transition;
+
+#ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
+	unsigned short saved_smr;
+	unsigned short saved_fcr;
+	unsigned char saved_brr;
+#endif
 };
 
 /* Function prototypes */
@@ -1076,7 +1083,7 @@ static unsigned int sci_get_mctrl(struct uart_port *port)
 	/* This routine is used for getting signals of: DTR, DCD, DSR, RI,
 	   and CTS/RTS */
 
-	return TIOCM_DTR | TIOCM_RTS | TIOCM_DSR;
+	return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR;
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA
@@ -1633,11 +1640,25 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps,
 	return ((freq + 16 * bps) / (32 * bps) - 1);
 }
 
+static void sci_reset(struct uart_port *port)
+{
+	unsigned int status;
+
+	do {
+		status = sci_in(port, SCxSR);
+	} while (!(status & SCxSR_TEND(port)));
+
+	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
+
+	if (port->type != PORT_SCI)
+		sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
+}
+
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 			    struct ktermios *old)
 {
 	struct sci_port *s = to_sci_port(port);
-	unsigned int status, baud, smr_val, max_baud;
+	unsigned int baud, smr_val, max_baud;
 	int t = -1;
 	u16 scfcr = 0;
 
@@ -1657,14 +1678,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
 
 	sci_port_enable(s);
 
-	do {
-		status = sci_in(port, SCxSR);
-	} while (!(status & SCxSR_TEND(port)));
-
-	sci_out(port, SCSCR, 0x00);	/* TE=0, RE=0, CKE1=0 */
-
-	if (port->type != PORT_SCI)
-		sci_out(port, SCFCR, scfcr | SCFCR_RFRST | SCFCR_TFRST);
+	sci_reset(port);
 
 	smr_val = sci_in(port, SCSMR) & 3;
 
@@ -1913,6 +1927,7 @@ static int __devinit sci_init_single(struct platform_device *dev,
 
 		port->dev = &dev->dev;
 
+		pm_runtime_irq_safe(&dev->dev);
 		pm_runtime_enable(&dev->dev);
 	}
 
@@ -2036,7 +2051,8 @@ static int __devinit serial_console_setup(struct console *co, char *options)
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
 
-	/* TODO: disable clock */
+	sci_port_disable(sci_port);
+
 	return uart_set_options(port, co, baud, parity, bits, flow);
 }
 
@@ -2079,6 +2095,36 @@ static int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 	return 0;
 }
 
+#define uart_console(port)	((port)->cons->index == (port)->line)
+
+static int sci_runtime_suspend(struct device *dev)
+{
+	struct sci_port *sci_port = dev_get_drvdata(dev);
+	struct uart_port *port = &sci_port->port;
+
+	if (uart_console(port)) {
+		sci_port->saved_smr = sci_in(port, SCSMR);
+		sci_port->saved_brr = sci_in(port, SCBRR);
+		sci_port->saved_fcr = sci_in(port, SCFCR);
+	}
+	return 0;
+}
+
+static int sci_runtime_resume(struct device *dev)
+{
+	struct sci_port *sci_port = dev_get_drvdata(dev);
+	struct uart_port *port = &sci_port->port;
+
+	if (uart_console(port)) {
+		sci_reset(port);
+		sci_out(port, SCSMR, sci_port->saved_smr);
+		sci_out(port, SCBRR, sci_port->saved_brr);
+		sci_out(port, SCFCR, sci_port->saved_fcr);
+		sci_out(port, SCSCR, sci_port->cfg->scscr);
+	}
+	return 0;
+}
+
 #define SCI_CONSOLE	(&serial_console)
 
 #else
@@ -2088,6 +2134,8 @@ static inline int __devinit sci_probe_earlyprintk(struct platform_device *pdev)
 }
 
 #define SCI_CONSOLE	NULL
+#define sci_runtime_suspend	NULL
+#define sci_runtime_resume	NULL
 
 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
 
@@ -2203,6 +2251,8 @@ static int sci_resume(struct device *dev)
 }
 
 static const struct dev_pm_ops sci_dev_pm_ops = {
+	.runtime_suspend = sci_runtime_suspend,
+	.runtime_resume = sci_runtime_resume,
 	.suspend	= sci_suspend,
 	.resume		= sci_resume,
 };