summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial/bfin_uart.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/bfin_uart.c')
-rw-r--r--drivers/tty/serial/bfin_uart.c83
1 files changed, 37 insertions, 46 deletions
diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c
index 66afb98b77b5..26953bfa6922 100644
--- a/drivers/tty/serial/bfin_uart.c
+++ b/drivers/tty/serial/bfin_uart.c
@@ -116,15 +116,22 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
- unsigned int status;
-
- status = bfin_serial_get_mctrl(&uart->port);
- uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
+ unsigned int status = bfin_serial_get_mctrl(&uart->port);
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- uart->scts = 1;
+ struct tty_struct *tty = uart->port.state->port.tty;
+
UART_CLEAR_SCTS(uart);
- UART_CLEAR_IER(uart, EDSSI);
+ if (tty->hw_stopped) {
+ if (status) {
+ tty->hw_stopped = 0;
+ uart_write_wakeup(&uart->port);
+ }
+ } else {
+ if (!status)
+ tty->hw_stopped = 1;
+ }
#endif
+ uart_handle_cts_change(&uart->port, status & TIOCM_CTS);
return IRQ_HANDLED;
}
@@ -175,13 +182,6 @@ static void bfin_serial_start_tx(struct uart_port *port)
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
struct tty_struct *tty = uart->port.state->port.tty;
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
- uart->scts = 0;
- uart_handle_cts_change(&uart->port, uart->scts);
- }
-#endif
-
/*
* To avoid losting RX interrupt, we reset IR function
* before sending data.
@@ -380,12 +380,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
- uart->scts = 0;
- uart_handle_cts_change(&uart->port, uart->scts);
- }
-#endif
spin_lock(&uart->port.lock);
if (UART_GET_LSR(uart) & THRE)
bfin_serial_tx_chars(uart);
@@ -531,13 +525,6 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
struct bfin_serial_port *uart = dev_id;
struct circ_buf *xmit = &uart->port.state->xmit;
-#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
- uart->scts = 0;
- uart_handle_cts_change(&uart->port, uart->scts);
- }
-#endif
-
spin_lock(&uart->port.lock);
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
disable_dma(uart->tx_dma_channel);
@@ -739,20 +726,26 @@ static int bfin_serial_startup(struct uart_port *port)
pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n");
}
}
- if (uart->rts_pin >= 0)
- gpio_direction_output(uart->rts_pin, 0);
+ if (uart->rts_pin >= 0) {
+ if (gpio_request(uart->rts_pin, DRIVER_NAME)) {
+ pr_info("fail to request RTS PIN at GPIO_%d\n", uart->rts_pin);
+ uart->rts_pin = -1;
+ } else
+ gpio_direction_output(uart->rts_pin, 0);
+ }
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->cts_pin >= 0 && request_irq(uart->status_irq,
- bfin_serial_mctrl_cts_int,
- 0, "BFIN_UART_MODEM_STATUS", uart)) {
- uart->cts_pin = -1;
- pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n");
- }
+ if (uart->cts_pin >= 0) {
+ if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int,
+ IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) {
+ uart->cts_pin = -1;
+ dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n");
+ }
- /* CTS RTS PINs are negative assertive. */
- UART_PUT_MCR(uart, ACTS);
- UART_SET_IER(uart, EDSSI);
+ /* CTS RTS PINs are negative assertive. */
+ UART_PUT_MCR(uart, ACTS);
+ UART_SET_IER(uart, EDSSI);
+ }
#endif
UART_SET_IER(uart, ERBFI);
@@ -792,6 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port)
#ifdef CONFIG_SERIAL_BFIN_CTSRTS
if (uart->cts_pin >= 0)
free_irq(gpio_to_irq(uart->cts_pin), uart);
+ if (uart->rts_pin >= 0)
+ gpio_free(uart->rts_pin);
#endif
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
if (uart->cts_pin >= 0)
@@ -1370,18 +1365,18 @@ static int bfin_serial_probe(struct platform_device *pdev)
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL)
uart->cts_pin = -1;
- else
+ else {
uart->cts_pin = res->start;
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ uart->port.flags |= ASYNC_CTS_FLOW;
+#endif
+ }
res = platform_get_resource(pdev, IORESOURCE_IO, 1);
if (res == NULL)
uart->rts_pin = -1;
else
uart->rts_pin = res->start;
-# if defined(CONFIG_SERIAL_BFIN_CTSRTS)
- if (uart->rts_pin >= 0)
- gpio_request(uart->rts_pin, DRIVER_NAME);
-# endif
#endif
}
@@ -1421,10 +1416,6 @@ static int __devexit bfin_serial_remove(struct platform_device *pdev)
if (uart) {
uart_remove_one_port(&bfin_serial_reg, &uart->port);
-#ifdef CONFIG_SERIAL_BFIN_CTSRTS
- if (uart->rts_pin >= 0)
- gpio_free(uart->rts_pin);
-#endif
iounmap(uart->port.membase);
peripheral_free_list(
(unsigned short *)pdev->dev.platform_data);