diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_aspeed_vuart.c | 84 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 75 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_lpss.c | 21 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_of.c | 31 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 1 |
5 files changed, 157 insertions, 55 deletions
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c index 0438d9a905ce..6e67fd89445a 100644 --- a/drivers/tty/serial/8250/8250_aspeed_vuart.c +++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c @@ -14,6 +14,8 @@ #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/clk.h> @@ -22,6 +24,7 @@ #define ASPEED_VUART_GCRA 0x20 #define ASPEED_VUART_GCRA_VUART_EN BIT(0) +#define ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY BIT(1) #define ASPEED_VUART_GCRA_DISABLE_HOST_TX_DISCARD BIT(5) #define ASPEED_VUART_GCRB 0x24 #define ASPEED_VUART_GCRB_HOST_SIRQ_MASK GENMASK(7, 4) @@ -131,8 +134,53 @@ static ssize_t sirq_store(struct device *dev, struct device_attribute *attr, static DEVICE_ATTR_RW(sirq); +static ssize_t sirq_polarity_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + u8 reg; + + reg = readb(vuart->regs + ASPEED_VUART_GCRA); + reg &= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", reg ? 1 : 0); +} + +static void aspeed_vuart_set_sirq_polarity(struct aspeed_vuart *vuart, + bool polarity) +{ + u8 reg = readb(vuart->regs + ASPEED_VUART_GCRA); + + if (polarity) + reg |= ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + else + reg &= ~ASPEED_VUART_GCRA_HOST_SIRQ_POLARITY; + + writeb(reg, vuart->regs + ASPEED_VUART_GCRA); +} + +static ssize_t sirq_polarity_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct aspeed_vuart *vuart = dev_get_drvdata(dev); + unsigned long val; + int err; + + err = kstrtoul(buf, 0, &val); + if (err) + return err; + + aspeed_vuart_set_sirq_polarity(vuart, val != 0); + + return count; +} + +static DEVICE_ATTR_RW(sirq_polarity); + static struct attribute *aspeed_vuart_attrs[] = { &dev_attr_sirq.attr, + &dev_attr_sirq_polarity.attr, &dev_attr_lpc_address.attr, NULL, }; @@ -302,8 +350,30 @@ static int aspeed_vuart_handle_irq(struct uart_port *port) return 1; } +static void aspeed_vuart_auto_configure_sirq_polarity( + struct aspeed_vuart *vuart, struct device_node *syscon_np, + u32 reg_offset, u32 reg_mask) +{ + struct regmap *regmap; + u32 value; + + regmap = syscon_node_to_regmap(syscon_np); + if (IS_ERR(regmap)) { + dev_warn(vuart->dev, + "could not get regmap for aspeed,sirq-polarity-sense\n"); + return; + } + if (regmap_read(regmap, reg_offset, &value)) { + dev_warn(vuart->dev, "could not read hw strap table\n"); + return; + } + + aspeed_vuart_set_sirq_polarity(vuart, (value & reg_mask) == 0); +} + static int aspeed_vuart_probe(struct platform_device *pdev) { + struct of_phandle_args sirq_polarity_sense_args; struct uart_8250_port port; struct aspeed_vuart *vuart; struct device_node *np; @@ -402,6 +472,20 @@ static int aspeed_vuart_probe(struct platform_device *pdev) vuart->line = rc; + rc = of_parse_phandle_with_fixed_args( + np, "aspeed,sirq-polarity-sense", 2, 0, + &sirq_polarity_sense_args); + if (rc < 0) { + dev_dbg(&pdev->dev, + "aspeed,sirq-polarity-sense property not found\n"); + } else { + aspeed_vuart_auto_configure_sirq_polarity( + vuart, sirq_polarity_sense_args.np, + sirq_polarity_sense_args.args[0], + BIT(sirq_polarity_sense_args.args[1])); + of_node_put(sirq_polarity_sense_args.np); + } + aspeed_vuart_set_enabled(vuart, true); aspeed_vuart_set_host_tx_discard(vuart, true); platform_set_drvdata(pdev, vuart); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 1c72fdc2dd37..acbf23b3e300 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -280,9 +280,6 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, long rate; int ret; - if (IS_ERR(d->clk)) - goto out; - clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, baud * 16); if (rate < 0) @@ -293,8 +290,10 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, ret = clk_set_rate(d->clk, rate); clk_prepare_enable(d->clk); - if (!ret) - p->uartclk = rate; + if (ret) + goto out; + + p->uartclk = rate; out: p->status &= ~UPSTAT_AUTOCTS; @@ -472,19 +471,18 @@ static int dw8250_probe(struct platform_device *pdev) device_property_read_u32(dev, "clock-frequency", &p->uartclk); /* If there is separate baudclk, get the rate from it. */ - data->clk = devm_clk_get(dev, "baudclk"); - if (IS_ERR(data->clk) && PTR_ERR(data->clk) != -EPROBE_DEFER) - data->clk = devm_clk_get(dev, NULL); - if (IS_ERR(data->clk) && PTR_ERR(data->clk) == -EPROBE_DEFER) - return -EPROBE_DEFER; - if (!IS_ERR_OR_NULL(data->clk)) { - err = clk_prepare_enable(data->clk); - if (err) - dev_warn(dev, "could not enable optional baudclk: %d\n", - err); - else - p->uartclk = clk_get_rate(data->clk); - } + data->clk = devm_clk_get_optional(dev, "baudclk"); + if (data->clk == NULL) + data->clk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(data->clk)) + return PTR_ERR(data->clk); + + err = clk_prepare_enable(data->clk); + if (err) + dev_warn(dev, "could not enable optional baudclk: %d\n", err); + + if (data->clk) + p->uartclk = clk_get_rate(data->clk); /* If no clock rate is defined, fail. */ if (!p->uartclk) { @@ -493,17 +491,16 @@ static int dw8250_probe(struct platform_device *pdev) goto err_clk; } - data->pclk = devm_clk_get(dev, "apb_pclk"); - if (IS_ERR(data->pclk) && PTR_ERR(data->pclk) == -EPROBE_DEFER) { - err = -EPROBE_DEFER; + data->pclk = devm_clk_get_optional(dev, "apb_pclk"); + if (IS_ERR(data->pclk)) { + err = PTR_ERR(data->pclk); goto err_clk; } - if (!IS_ERR(data->pclk)) { - err = clk_prepare_enable(data->pclk); - if (err) { - dev_err(dev, "could not enable apb_pclk\n"); - goto err_clk; - } + + err = clk_prepare_enable(data->pclk); + if (err) { + dev_err(dev, "could not enable apb_pclk\n"); + goto err_clk; } data->rst = devm_reset_control_get_optional_exclusive(dev, NULL); @@ -546,12 +543,10 @@ err_reset: reset_control_assert(data->rst); err_pclk: - if (!IS_ERR(data->pclk)) - clk_disable_unprepare(data->pclk); + clk_disable_unprepare(data->pclk); err_clk: - if (!IS_ERR(data->clk)) - clk_disable_unprepare(data->clk); + clk_disable_unprepare(data->clk); return err; } @@ -567,11 +562,9 @@ static int dw8250_remove(struct platform_device *pdev) reset_control_assert(data->rst); - if (!IS_ERR(data->pclk)) - clk_disable_unprepare(data->pclk); + clk_disable_unprepare(data->pclk); - if (!IS_ERR(data->clk)) - clk_disable_unprepare(data->clk); + clk_disable_unprepare(data->clk); pm_runtime_disable(dev); pm_runtime_put_noidle(dev); @@ -604,11 +597,9 @@ static int dw8250_runtime_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - if (!IS_ERR(data->clk)) - clk_disable_unprepare(data->clk); + clk_disable_unprepare(data->clk); - if (!IS_ERR(data->pclk)) - clk_disable_unprepare(data->pclk); + clk_disable_unprepare(data->pclk); return 0; } @@ -617,11 +608,9 @@ static int dw8250_runtime_resume(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - if (!IS_ERR(data->pclk)) - clk_prepare_enable(data->pclk); + clk_prepare_enable(data->pclk); - if (!IS_ERR(data->clk)) - clk_prepare_enable(data->clk); + clk_prepare_enable(data->clk); return 0; } diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c index 5f72ef3ea574..60eff3240c8a 100644 --- a/drivers/tty/serial/8250/8250_lpss.c +++ b/drivers/tty/serial/8250/8250_lpss.c @@ -221,17 +221,6 @@ static void qrk_serial_exit_dma(struct lpss8250 *lpss) {} static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port) { - struct pci_dev *pdev = to_pci_dev(port->dev); - int ret; - - pci_set_master(pdev); - - ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); - if (ret < 0) - return ret; - - port->irq = pci_irq_vector(pdev, 0); - qrk_serial_setup_dma(lpss, port); return 0; } @@ -293,16 +282,22 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (ret) return ret; + pci_set_master(pdev); + lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL); if (!lpss) return -ENOMEM; + ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES); + if (ret < 0) + return ret; + lpss->board = (struct lpss8250_board *)id->driver_data; memset(&uart, 0, sizeof(struct uart_8250_port)); uart.port.dev = &pdev->dev; - uart.port.irq = pdev->irq; + uart.port.irq = pci_irq_vector(pdev, 0); uart.port.private_data = &lpss->data; uart.port.type = PORT_16550A; uart.port.iotype = UPIO_MEM; @@ -337,6 +332,7 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) err_exit: if (lpss->board->exit) lpss->board->exit(lpss); + pci_free_irq_vectors(pdev); return ret; } @@ -348,6 +344,7 @@ static void lpss8250_remove(struct pci_dev *pdev) if (lpss->board->exit) lpss->board->exit(lpss); + pci_free_irq_vectors(pdev); } static const struct lpss8250_board byt_board = { diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c index 0826cfdbd406..92fbf46ce3bd 100644 --- a/drivers/tty/serial/8250/8250_of.c +++ b/drivers/tty/serial/8250/8250_of.c @@ -48,6 +48,36 @@ static inline void tegra_serial_handle_break(struct uart_port *port) } #endif +static int of_8250_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct uart_8250_port *up = up_to_u8250p(port); + + /* Clamp the delays to [0, 100ms] */ + rs485->delay_rts_before_send = min(rs485->delay_rts_before_send, 100U); + rs485->delay_rts_after_send = min(rs485->delay_rts_after_send, 100U); + + port->rs485 = *rs485; + + /* + * Both serial8250_em485_init and serial8250_em485_destroy + * are idempotent + */ + if (rs485->flags & SER_RS485_ENABLED) { + int ret = serial8250_em485_init(up); + + if (ret) { + rs485->flags &= ~SER_RS485_ENABLED; + port->rs485.flags &= ~SER_RS485_ENABLED; + } + return ret; + } + + serial8250_em485_destroy(up); + + return 0; +} + /* * Fill a struct uart_port for a given device node */ @@ -178,6 +208,7 @@ static int of_platform_serial_setup(struct platform_device *ofdev, port->flags |= UPF_SKIP_TEST; port->dev = &ofdev->dev; + port->rs485_config = of_8250_rs485_config; switch (type) { case PORT_TEGRA: diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 7ef60f8b6e2c..771ac5dc6023 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -243,6 +243,7 @@ config SERIAL_8250_ASPEED_VUART tristate "Aspeed Virtual UART" depends on SERIAL_8250 depends on OF + depends on REGMAP && MFD_SYSCON help If you want to use the virtual UART (VUART) device on Aspeed BMC platforms, enable this option. This enables the 16550A- |