diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_port.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 41 |
1 files changed, 41 insertions, 0 deletions
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1632f7d25acc..09475695effd 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -16,6 +16,7 @@ #include <linux/ioport.h> #include <linux/init.h> #include <linux/console.h> +#include <linux/gpio/consumer.h> #include <linux/sysrq.h> #include <linux/delay.h> #include <linux/platform_device.h> @@ -2631,6 +2632,46 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, (port->uartclk + tolerance) / 16); } +/* + * Note in order to avoid the tty port mutex deadlock don't use the next method + * within the uart port callbacks. Primarily it's supposed to be utilized to + * handle a sudden reference clock rate change. + */ +void serial8250_update_uartclk(struct uart_port *port, unsigned int uartclk) +{ + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int baud, quot, frac = 0; + struct ktermios *termios; + unsigned long flags; + + mutex_lock(&port->state->port.mutex); + + if (port->uartclk == uartclk) + goto out_lock; + + port->uartclk = uartclk; + termios = &port->state->port.tty->termios; + + baud = serial8250_get_baud_rate(port, termios, NULL); + quot = serial8250_get_divisor(port, baud, &frac); + + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); + + uart_update_timeout(port, termios->c_cflag, baud); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS); + + spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + +out_lock: + mutex_unlock(&port->state->port.mutex); +} +EXPORT_SYMBOL_GPL(serial8250_update_uartclk); + void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) |