diff options
Diffstat (limited to 'drivers/tty/serial/8250/8250_exar.c')
| -rw-r--r-- | drivers/tty/serial/8250/8250_exar.c | 173 |
1 files changed, 168 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c index a309bcffffcd..b5c98e5bf524 100644 --- a/drivers/tty/serial/8250/8250_exar.c +++ b/drivers/tty/serial/8250/8250_exar.c @@ -9,10 +9,13 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License. */ +#include <linux/acpi.h> +#include <linux/dmi.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> +#include <linux/property.h> #include <linux/serial_core.h> #include <linux/serial_reg.h> #include <linux/slab.h> @@ -60,8 +63,50 @@ #define UART_EXAR_MPIOSEL_15_8 0x99 /* MPIOSEL[15:8] */ #define UART_EXAR_MPIOOD_15_8 0x9a /* MPIOOD[15:8] */ +#define UART_EXAR_RS485_DLY(x) ((x) << 4) + +/* + * IOT2040 MPIO wiring semantics: + * + * MPIO Port Function + * ---- ---- -------- + * 0 2 Mode bit 0 + * 1 2 Mode bit 1 + * 2 2 Terminate bus + * 3 - <reserved> + * 4 3 Mode bit 0 + * 5 3 Mode bit 1 + * 6 3 Terminate bus + * 7 - <reserved> + * 8 2 Enable + * 9 3 Enable + * 10 - Red LED + * 11..15 - <unused> + */ + +/* IOT2040 MPIOs 0..7 */ +#define IOT2040_UART_MODE_RS232 0x01 +#define IOT2040_UART_MODE_RS485 0x02 +#define IOT2040_UART_MODE_RS422 0x03 +#define IOT2040_UART_TERMINATE_BUS 0x04 + +#define IOT2040_UART1_MASK 0x0f +#define IOT2040_UART2_SHIFT 4 + +#define IOT2040_UARTS_DEFAULT_MODE 0x11 /* both RS232 */ +#define IOT2040_UARTS_GPIO_LO_MODE 0x88 /* reserved pins as input */ + +/* IOT2040 MPIOs 8..15 */ +#define IOT2040_UARTS_ENABLE 0x03 +#define IOT2040_UARTS_GPIO_HI_MODE 0xF8 /* enable & LED as outputs */ + struct exar8250; +struct exar8250_platform { + int (*rs485_config)(struct uart_port *, struct serial_rs485 *); + int (*register_gpio)(struct pci_dev *, struct uart_8250_port *); +}; + /** * struct exar8250_board - board information * @num_ports: number of serial ports @@ -194,7 +239,8 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p) } static void * -xr17v35x_register_gpio(struct pci_dev *pcidev) +__xr17v35x_register_gpio(struct pci_dev *pcidev, + const struct property_entry *properties) { struct platform_device *pdev; @@ -202,8 +248,11 @@ xr17v35x_register_gpio(struct pci_dev *pcidev) if (!pdev) return NULL; - platform_set_drvdata(pdev, pcidev); - if (platform_device_add(pdev) < 0) { + pdev->dev.parent = &pcidev->dev; + ACPI_COMPANION_SET(&pdev->dev, ACPI_COMPANION(&pcidev->dev)); + + if (platform_device_add_properties(pdev, properties) < 0 || + platform_device_add(pdev) < 0) { platform_device_put(pdev); return NULL; } @@ -211,17 +260,131 @@ xr17v35x_register_gpio(struct pci_dev *pcidev) return pdev; } +static const struct property_entry exar_gpio_properties[] = { + PROPERTY_ENTRY_U32("linux,first-pin", 0), + PROPERTY_ENTRY_U32("ngpios", 16), + { } +}; + +static int xr17v35x_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + if (pcidev->vendor == PCI_VENDOR_ID_EXAR) + port->port.private_data = + __xr17v35x_register_gpio(pcidev, exar_gpio_properties); + + return 0; +} + +static const struct exar8250_platform exar8250_default_platform = { + .register_gpio = xr17v35x_register_gpio, +}; + +static int iot2040_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + bool is_rs485 = !!(rs485->flags & SER_RS485_ENABLED); + u8 __iomem *p = port->membase; + u8 mask = IOT2040_UART1_MASK; + u8 mode, value; + + if (is_rs485) { + if (rs485->flags & SER_RS485_RX_DURING_TX) + mode = IOT2040_UART_MODE_RS422; + else + mode = IOT2040_UART_MODE_RS485; + + if (rs485->flags & SER_RS485_TERMINATE_BUS) + mode |= IOT2040_UART_TERMINATE_BUS; + } else { + mode = IOT2040_UART_MODE_RS232; + } + + if (port->line == 3) { + mask <<= IOT2040_UART2_SHIFT; + mode <<= IOT2040_UART2_SHIFT; + } + + value = readb(p + UART_EXAR_MPIOLVL_7_0); + value &= ~mask; + value |= mode; + writeb(value, p + UART_EXAR_MPIOLVL_7_0); + + value = readb(p + UART_EXAR_FCTR); + if (is_rs485) + value |= UART_FCTR_EXAR_485; + else + value &= ~UART_FCTR_EXAR_485; + writeb(value, p + UART_EXAR_FCTR); + + if (is_rs485) + writeb(UART_EXAR_RS485_DLY(4), p + UART_MSR); + + port->rs485 = *rs485; + + return 0; +} + +static const struct property_entry iot2040_gpio_properties[] = { + PROPERTY_ENTRY_U32("linux,first-pin", 10), + PROPERTY_ENTRY_U32("ngpios", 1), + { } +}; + +static int iot2040_register_gpio(struct pci_dev *pcidev, + struct uart_8250_port *port) +{ + u8 __iomem *p = port->port.membase; + + writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0); + writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0); + writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8); + writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8); + + port->port.private_data = + __xr17v35x_register_gpio(pcidev, iot2040_gpio_properties); + + return 0; +} + +static const struct exar8250_platform iot2040_platform = { + .rs485_config = iot2040_rs485_config, + .register_gpio = iot2040_register_gpio, +}; + +static const struct dmi_system_id exar_platforms[] = { + { + .matches = { + DMI_EXACT_MATCH(DMI_BOARD_NAME, "SIMATIC IOT2000"), + DMI_EXACT_MATCH(DMI_BOARD_ASSET_TAG, + "6ES7647-0AA00-1YA2"), + }, + .driver_data = (void *)&iot2040_platform, + }, + {} +}; + static int pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, struct uart_8250_port *port, int idx) { const struct exar8250_board *board = priv->board; + const struct exar8250_platform *platform; + const struct dmi_system_id *dmi_match; unsigned int offset = idx * 0x400; unsigned int baud = 7812500; u8 __iomem *p; int ret; + dmi_match = dmi_first_match(exar_platforms); + if (dmi_match) + platform = dmi_match->driver_data; + else + platform = &exar8250_default_platform; + port->port.uartclk = baud * 16; + port->port.rs485_config = platform->rs485_config; + /* * Setup the uart clock for the devices on expansion slot to * half the clock speed of the main chip (which is 125MHz) @@ -244,10 +407,10 @@ pci_xr17v35x_setup(struct exar8250 *priv, struct pci_dev *pcidev, /* Setup Multipurpose Input/Output pins. */ setup_gpio(pcidev, p); - port->port.private_data = xr17v35x_register_gpio(pcidev); + ret = platform->register_gpio(pcidev, port); } - return 0; + return ret; } static void pci_xr17v35x_exit(struct pci_dev *pcidev) |